Home
        Electrolux EWT 9120 W User's Manual
         Contents
1.     Selecting the spin speed   Turn the spin speed selector on the desired posi   tion    The maximum spin speeds are     for Cottons  Synthetics  Easy iron  Wool  Hand   wash   900 rpm  for Delicates  Silk  Mini pro   gramme   700 rpm    At the end of the programme  if you have selected     Rinse hold     J or    Night silence plus      YOU  then need to select a    Spin    or    Drain    programme  to finish the cycle and empty the water     Selecting options    You must select the different options after select   ing the programme and before pressing the    Start        Pause    pushbutton  see    Programmes table       Press the desired button s    the corresponding  lights come on  If pressed again  the lights go out   If one of the options is not compatible with the se   lected programme  the    Start Pause    pushbutton  flashes red        Prewash    option  The appliance runs a prewash at 30  C max        Eco    option   This option allows you to choose a lower temper   ature programme which is as effective as a higher  temperature wash programme           Super quick    option  The washing time will be reduced depending on  the programme selected        Rinse plus    option      The washing machine will add one or more rinses   during the cycle  This option is recommended for   people with sensitive skin and in soft water areas       Temporary   Press the    Rinse plus        pushbut    ton  The option is only active for the selected pro    gramme    Permanent   Hold
2.   a Rinse hold has been selected   the drum shutters are open     e the temperature inside the drum is too high     the lid unlocks 1   2 minutes after the end of the cycle   you have gone past the MAX indicator     8 electrolux    Problems Causes    The    Start Pause    push     the lid is not closed properly   button 1  flashes red 2   e the object trap is obstructed   e the drain hose is blocked or bent   e the drain hose is fixed to high  see  Installation  section    e the drainage pump is blocked   e the standpipes blocked   e the water tap is closed  the water supply has been cut off   1  On some models  the auditable signals can sound  2  After solving any problems  press  Start Pause  pushbutton to restart the interrupted programme     Detergents and Additives    Only use detergents and additives designed for be used when a prewash has been selected  For  use in a washing machine  We do not recommend cycles without prewash  they must be added via  mixing different types of detergents  This may spoil   means of a dosing ball  Detergent tablets or doses  the washing  There are no restrictions on the use must be placed in the detergent compartment of  of powder detergents  Liquid detergents must not your appliance s dispenser box     Technical Specifications    DIMENSIONS Height 850 mm  Width 400 mm  Depth 600 mm  LINE VOLTAGE  FREQUENCY 230 V   50 Hz  POWER CONSUMPTION 2300 W  WATER PRESSURE Minimum 0 05 MPa  0 5 bar   Maximum 0 8 MPa  8 bar   Connection to water supp
3.  down the    Temperature    d and      Options    pushbuttons for a few seconds  The op    tion is permanently activated  even if the appliance   is switched off  To deactivate it  repeat the proc    ess           Delay start       This option allows you to delay the start of a wash  programme by 3  6 or 9 hours by pressing the     Delay start    pushbutton    You can change or cancel the delayed start time   at any time before you press the    Start Pause      pushbutton by pressing the    Delay start    pushbut   ton again  when all indicators are off  the wash  programme will start immediately     If you have already pressed the    Start Pause      pushbutton and you want to change or cancel the   delayed start  proceed as follows     e To cancel the delay start and start the cycle im    mediately  press    Start Pause    and then    Delay   start     Press    Start Pause    to start the cycle    e To change the timer delay period  you must go  through the    Stop    position O and reprog   ramme your cycle    The lid will be locked during the delayed start time    If you need to open it  you must first pause the ap    pliance by pressing the    Start Pause    pushbutton    After closing the lid again  press the    Start Pause      pushbutton           Start of the programme    Press the    Start Pause    pushbutton to start the  cycle  The corresponding light will come on green   It is normal for the programme selector to remain  stationary during the cycle  The light cor
4.  for any damage resulting from incorrect installa   tion     Precautions to be taken against frost    If your appliance is exposed to temperatures below  0  C  the following precautions must be taken    e Close the tap and disconnect the inlet hose    e Place the end of this hose and the drain hose in  a basin on the floor    Select the Drain programme let it run until the  end of the cycle    Disconnect the appliance from the power supply  by turning the programme selector to    Stop       e Unplug the appliance    e Replace the inlet hose and drain hose    This way  the water remaining in the hoses will be  drained away  avoiding any ice formation which  would damage your appliance    Before turning your appliance on again  ensure  that it is installed in an area where the temperature  will not fall below freezing     Use    e Your appliance is intended for normal domestic  use  Do not use the appliance for commercial or  industrial purposes or for any other purpose   Refer to the instructions on the label of each item  before washing    Do not put items into the washing machine   which have had stains removed with petrol  al    cohol  trichlorethylen etc  If such stain removers  have been used  wait until the product has  evaporated before putting these items into the  drum    e This appliance is not intended for use by per   sons  including children  with reduced physical   sensory or mental capabilities  or lack of expe   rience and knowledge  unless they have been  give
5.  it is too  short  contact an engineer              Electrical connection    This washing machine must only be connected in  single phased 230 V  Check the fuse size  13 A for  230 V  The appliance must not be connected with  an extension lead or multi plug adaptor  Ensure  that the plug is earthed and that it is in accordance  with current regulations        Positioning  Position the appliance on a flat and hard surface in  a ventilated location  Ensure the appliance does  not come into contact with the wall or other furni   ure  Accurate levelling avoids vibrations  noise  and prevents the appliance from moving when  running                             ers  cut off the power supply cable at the base of  the appliance     The symbol X on the product or on its packaging  indicates that this product may not be treated as   household waste  Instead it should be taken to the  appropriate collection point for the recycling of    10 electrolux    electrical and electronic equipment  By ensuring  this product is disposed of correctly  you will help  prevent potential negative consequences for the  environment and human health  which could oth   erwise be caused by inappropriate waste handling  of this product  For more detailed information  about recycling of this product  please contact  your local council  your household waste disposal  service or the shop where you purchased the  product     Protecting the environment     ww  To save water and energy and therefore help  protect 
6. Thinking of pri user manual     Electrolux    Washing Machine    EWT 9120 W    2 electrolux    1  The control panel  2  Lid handle  8  Adjustable levelling feet                Control panel                            O  Delicate Spin a Cottons     Spin N Synthetics     90    Fey   es  Drain iron   40     Prewash lhe  L  ddian   30     Eco e O  elicate  Delicates 500 Super    Rinse Soa ox oui 9  gt      4 Option Es   Rinses   y Wool  2   E  CCC     e   Mini 23 Handwash  promt aay l a  Soak Silk  FY special          Programme selector   Spin speed selector  Pushbuttons and their functions  Lights of cycle progress     Start Pause    pushbutton     Delay start    pushbutton    OREGON    Dispenser box    LLJ Prewash  LL  Wash    Lu   Lu    SP  amp  Softener  do not fill above the MAX symbol  M     Gt       Safety Information    Please read these points carefully before installing  and using your appliance  Keep this user manual  with your appliance     General safety    e Do not modify or attempt to modify this appli   ance  This would put yourself in danger    e Ensure that all coins  safety pins  brooches   screws etc have been removed before starting  a washing programme  If left in washing  they  can seriously damage the appliance    e Use the recommended quantity of detergent    Put small items together  socks  belts etc   in a   small linen bag or pillow case    e Unplug and close inlet hose tap after using ap    pliance    e Always disconnect the power supply from the   ap
7. e installation section      e the drain hose is blocked or bent     the object trap is obstructed     e the out of balance detector has been activated   washing is unevenly    distributed in the drum    the    Drain    programme or    Night Silence Plus    or    Rinse hold    option  have been selected    the height of the drainage U piece is unsuitable     too much detergent has caused foam to overflow   the detergent is unsuitable for machine washing   the drainage U piece isn   t attached correctly    the water inlet hose is leaking     the detergent is unsuitable for machine washing   there is too much washing in the drum    the wash cycle is unsuitable    there isn   t enough detergent     all packaging have not been removed from the appliance  see installation  section     the appliance isn   t level and is unbalanced    the appliance is too close to the wall or furniture    washing is unevenly distributed in the drum  the load is too small    the appliance is in running in period     the water inlet filters are dirty    the power or water supply has been cut off    the motor overheating detector has been activated    the water inlet temperature is lower than usual    the foam detection security system has been activated  too much de   tergent  and the washing machine has begun draining the foam    the out of balance detector has been activated  an extra phase has been  added to distribute washing more evenly in the drum     the water or electricity supply is defective 
8. ll of water  15 25 min     Mini programme  30      For lightly 2 5kg Delay start  soiled fabrics except for wool  25 35 min  Rinses   Hand washed items can be rinsedin 5 5 kg Night silence plus  Rinse hold  Rinse  this programme  50 60 min plus  Delay start    6 electrolux    Programme   Type of washing Possible options    Delicate rinse   Hand washed items can be 2 5 kg Night silence plus  Rinse hold  Rinse  rinsed in this programme  85 45 min plus  Delay start   Drain  Runs an empty cycle after a Rinse hold 5 5 kg    or Night silence plus   0 10 min   Spin   A spin cycle from 500 to 900 rpm after 5 5 kg Delay start   a Rinse hold  or Night silence plus   10 20 min   Delicate spin   A delicate spin cycle after a 2 5 kg Delay start   Rinse hold  or Night silence plus   5 15 min    1  Reference programme for test confirming to CEI 456 standard  Cottons 60   programme  Eco option    49 L  1 04 kWh   170 min  2  Available with programmes with wash temperatures of 40  C and above     Care and cleaning  Unplug the appliance before cleaning        Descaling the appliance   To descale the appliance  use an appropriate non   corrosive product designed for washing machines   Read product label for recommended amounts  and how often descaling should be carried out     The exterior    Use warm soapy water to clean the exterior of the   appliance  Never use alcohol  solvents or similar Check if the filter being coupled well   products  before closing the trap to pull up and  down the cen
9. ly Type 20 27  Installation       Remove all protective packaging for transit before  using for the first time  Keep in case needed for  future transit  Transporting a non secured appli   ance may damage internal components and cause  leakages and malfunctions  The appliance can al   so be damaged through physical contact     Unpacking                                                                                                       To install your washing machine at the same level  as surrounding furniture  proceed as shown on  picture 4     Water supply   Install the supplied water inlet hose at the rear of  your washing machine by proceeding as follows   Do not reuse an old hose  The water inlet hose can  not be extended  If it is too short  please contact  he after sales service                    Environment       Disposing of the appliance        All materials carrying the oO symbol are re   cyclable  Dispose of them at a waste collec   tion site  enquire at your local council  for collection  and recycling  When disposing of your appliance   remove all parts which could be dangerous to oth     electrolux 9    Open the water inlet tap  Check there are no leaks     Drainage   Fit the U piece on the  drainage hose  Place  everything in a drainage  point  or in a sink  at a  height of between 70  and 100 cm  Ensure it is  positioned securely  Air  must be able to enter  the end of the hose  to  avoid any risk of siphon   ing    The drain hose must never be stretched  If
10. n supervision or instruction concerning use  of the appliance by a person responsible for their  safety    Children should be supervised to ensure that  they do not play with the appliance     Run an initial wash cycle at 90  C  without any  washing but with detergent to clean the water  tank     4 electrolux    Daily use    Loading washing    e Open the lid of the   appliance    Open the drum by   depressing the   locking button A    The two shutters   unlock automati    cally    e Load the washing   close the drum and  the lid of your  washing machine     Warning  Before closing the lid of your  appliance  ensure that the drum is properly  closed    e When the two shutters are closed   e locking button A released     Proportioning of detergents   Pour the amount of washing powder into the  washing LIL  and prewash LIJ compartments if you  have selected the    prewash    option  Pour fabric  softener into the compartment    if necessary     Selection of desired programme   Turn the programme selector to the required pro   gramme  The    Start Pause    pushbutton flashes  green    If you turn the programme selector to another pro   gramme while a cycle is in progress  the appliance  will ignore the new selected programme  The     Start Pause    pushbutton flashes red for a few  seconds     Selecting the temperature    Press the    Temperature     i pushbutton repeatedly  to increase or decrease the temperature  see    Pro   grammes table      The K  symbol means a cold  wash 
11. pliance before cleaning or maintenance    e Do not machine wash clothes with ribbing  un    inished or torn material     Installation    e Unpack or ask for the appliance to be unpacked   immediately upon delivery  Check the outside of   he appliance is not damaged in any way  Report  all transit damage to your retailer    e Remove all transit bolts and packaging before   installing the appliance    e Connection to the water supply must be carried   out by a qualified plumber    e  f your domestic electrical circuit needs adapting   o allow the appliance to be plugged in  use a   qualified electrician    e Ensure that  after installation  the power cable is   not trapped under the appliance    e  f the appliance is installed on carpeted floor   ensure that the carpet does not obstruct any  ventilation ducts located at the base of the ap   pliance    e The appliance must be equipped with an earth   ed power plug which conforms to regulations    e Before connecting your appliance to the power  supply  carefully read the instructions in the  chapter entitled    Electrical connection       e Replacing the power cable should only be car   ried out by an authorised service engineer        How to run a wash cycle  _       Using for the first time     i  e Ensure the electrical and water connec   tions comply with the installation instruc   tions    e Remove the polystyrene insert and all other   items inside the drum     electrolux 3    e The manufacturer cannot be held responsible 
12. respond   ing to the current cycle is illuminated    LIJ  L   Prewash   Wash            Rinses   Spin    gt    End of cycle    Interrupting a programme    Adding washing during the first 10 minutes  Press the    Start Pause    pushbutton   the corre   sponding light will flash green while the appliance  is paused  The lid can only be opened around 2  minutes after the washing machine has come to a  stop  Press the    Start Pause    pushbutton again to  continue the programme    Modifying the programme in progress   Before making any changes to the current pro   gramme  you need to pause the washing machine  by pressing the    Start Pause    pushbutton  If the  modification is not possible  the    Start Pause       Programmes table    electrolux 5    pushbutton flashes red for a few seconds  If you  still decide to change the programme  you must  cancel the current programme  see below    Cancelling the programme   If you want to cancel the programme  turn the pro   gramme selector to the    Stop    position         End of the programme    The washing machine stops automatically  the     Start Pause    pushbutton goes out and the light     End of cycle     gt   comes on  The lid can only be  opened around 2 minutes after the washing ma   chine has come to a stop  Turn the programme  selector to the    Stop    position     Remove wash   ing  Unplug and close water inlet tap     Standby mode    If the appliance is on but no commands are selec   ted for 10 min before or after a c
13. the environment  we recommend the   following    e Whenever possible  use the appliance at full ca   pacity and avoid partial loads    e Only use the prewash and soak programmes for  heavily soiled items    e Use an appropriate amount of detergent for the  hardness of the water  the size of the load and  how soiled the washing is     electrolux 11    www electrolux com    ANC 108 4649 00   05 09    
14. tral wall                    Dispenser box  To clean  proceed as fo                Water inlet filters  To clean  proceed as follows                        Object trap    Regularly clean out the object trap which is located  at the bottom of the drum                              Operating Problems    Numerous checks were carried out on your appli   ance before it left the factory  However  should you    electrolux 7    notice a malfunction  please refer to the sections  below before contacting the after sales service     Problems Causes    The washing machine  doesn   t start or doesn   t  fill     The appliance fills but  empties straight away     The washing machine  doesn t rinse or doesn   t  empty     You have found water  around the washing ma   chine     Wash is unsatisfactory     The appliance vibrates  is  noisy     The wash cycle is much  too long     The washing machine  stops during a wash cy   cle     The lid doesn   t open at  the end of the cycle     Softener runs directly into  the drum when filling the  dispenser box     the appliance isn   t plugged in correctly  the electrical installation isn   t  working  there is a power failure    the lid of your appliance and the drum shutters aren   t closed firmly   the programme start command hasn   t been properly selected    the water supply has been cut off  the water inlet tap is closed    the water inlet filters are dirty    a red tab appears on the water inlet hose     the drainage U piece is fixed too low  se
15. ycle  it goes into  standby mode  All the lights go out and    Start   Pause    flashes slowly    To exit standby mode  simply press any pushbut   ton or turn the programme selector        Programme   Type of washing Possible options             Cottons    cold   90      White or colour  e g  5 5 kg Night silence plus  Rinse hold  Pre   normally soiled work clothes  bed linen  table 140 150 wash  Eco    Super quick  Rinse plus   linen  body linen  towels  min Delay start  Synthetics  cold   60      Synthetic fabrics  2 5 kg Night silence plus  Rinse hold  Pre   body linen  fab  coloured farics  non iron shirts  90 100 min wash  Eco   Super quick  Rinse plus   blouses  Delay start  Easy iron  cold   60      Reduces creasingand 1 0 kg Rinse hold  Prewash  Rinse plus  Delay  makes ironing easier  100 110 start   min  Delicates  cold   40      For all delicate mate  2 5 kg Night silence plus  Rinse hold  Pre   rials  for example curtains  60 70 min wash  Super quick  Rinse plus  Delay   start   SS Wool  cold   40      Very delicate items 1 0kg   Night silence plus  Rinse hold  Delay  carrying the    wash by hand    label  55 65 min start      Handwash  cold   40      Very delicate 1 0kg _ Night silence plus  Rinse hold  Delay  items carrying the    wash by hand    label  55 65 min start  Silk  30      Fabric machine washable at 80  C  1 0 kg Night silence plus  Rinse hold  Delay   25 35 min start  Soak  30      Soaking for very dirty washing  5 5 kg Delay start  The drum stops fu
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
K 5.85 M - Migros  INSTRUCTIONS MANUAL - Snap-on  Mode d`emploi  Renesas ReMarkey R5H30101 User's Manual  Communicator HLD- 323 Bedienungsanleitung DEUTSCH    Copyright © All rights reserved. 
   Failed to retrieve file