Dyson DCO1 User's Manual
Contents
1. remove wand and insert tool adaptor into end of hose Attach tool as required Cleaner head adjustment Hold the cleaner head down with foot and tilt machine back Tool adaptor On Off switch Cleaner head adjusts automatically to correct height remember to unplug the machine when not in use and before carrying out maintenance 2 H OW Ke use WARNING For your own safety please ama Carrying handle Ensure clear bin is firmly in place before lifting Clear bin capacity Do not fill above this line Remove clear bin and cyclone top from Remove clear bin from cyclone top and wrap machine by lifting up until it releases a plastic bag around the rim of the clear bin Invert clear bin and wait at least 10 O Wipe shroud holes free of all dust and Replace clear bin and cyclone top ensuring seconds before releasing debris that they click into upright position Filter changing Remove clear bin from machine to wash in water if desired After washing ensure that the yellow bin inner is in place See step 7 of Blockage procedure in your instructions Q Lift out pre filter Unhinge filter cage and replace old S level submicro filter at least every three months e Lift yellow bin catch for access to the HEPA filter Replace this filter at least every twelve months Do not use strong detergents and ensure clear bin is2. 4 remember to unplug the machine when not in use and before carrying out maintenance lees Please check your DCO1 for blockages if you notice that the vacuum cleaner stops picking up the sound of the vacuum cleaner changes pitch or the suction reduces or stops altogether Any Blockage only repairs will incur a charge of 35 00 so please check your machine carefully Price correct at time of printing 1 Check filters Filter life is dependent on the amount 4 Check belt amp soleplate Q Remove three screws to the vacuum cleaner is used undo soleplate The S level filter must be replaced at least every 3 months The HEPA filter must be replaced at least every 12 months Mear TE Use only genuine Dyson filters 2 Lift soleplate to remove Check condition of belt and replace if necessary See Changing the belt section in your instructions Check that soleplate 4 passage is clear and remove blockages if necessary 2 Clean shroud 1 Wipe shroud holes free T Z 1 of all dust debris pA Sa 2 Check air duct behind c Qa bin for debris Ce O 7o Turn machine upside down Remove soleplate Raise inspection flap 1 and look down through 3 Check wand hose o2 7 Remove wand handle from machine A 2 aperture If you cannot see daylight remove any blockage with a stiff wire Rotate cleaner head so that opening 2 be
3. fully dry before Also see back page s replacing on machine 3 Changing the belt P For your own safety Pisas remember to unplug the machine when not Replacement belts are available direct from Dyson Customer Care Tel 01666 827272 1 Remove soleplate 2 Line up brush bar Q Undo three cross head screws 2 Remove soleplate by lifting from the back and then remove brush bar Q Fit belt over motor shaft and domed section of brush bar 2 Pull belt taut and locate brush bar in slot End cap of brush bar With raised section 2 on end of brush bar Raised section orientated as shown locate brush bar in slot and rotate end cap towards back of machine until it comes to a stop 3 Centralise belt 3 If cradle becomes detached from soleplate align circular ends of cradle with corresponding holes of soleplate and slot into place ensuring that front edge of cradle faces the right direction Thread removal After unplugging the cleaner carefully remove any entwined cotton wool or fluff with scissors NOTE Failure to remove these may result in loss of performance and possible damage to the machine DYSON CUSTOMER CARE walcycon Helpline 01666 827272 E fcHnoLost MALMESBURY dyson Facsimile 01666 827298 jee Contact for all service assistance SN16 ORP 4 Blocka ge procedure DEQ WARNING For your own safety please
4. may overheat which will cause the thermal cut out to operate NOTE Vacuuming builder s dust and some carpet fresheners may cause the filters to require changing more frequently Dyson does not recommend the use of carpet fresheners Replacement filters are available from your local retailer or direct from Dyson Call or fax the Helpline for orders IMPORTANT Use only genuine Dyson filters which have been tested and approved for this cleaner Your Dyson has a built in thermal cut out to protect it in the event of a restriction to the airflow and may suddenly stop working temporarily if you do not change the filters at the stated time or if blockages are not cleared immediately If the vacuum cleaner suddenly stops working ie the motor makes no sound when switched on then please check your cleaner for blockages as Electrostatic amp HEPA filters Absolute Always replace yellow S level filter HEPA S Level Bactiguard Bactiguard at least every 3 months and HEPA filter every 12 months detailed in this operating manual Remember also to check the fuse in the plug Having established that there are no blockages and that the filters have been replaced within the stated time leave your vacuum cleaner unplugged for 60 minutes and then try using it again If the vacuum cleaner still does not work please call Dyson Customer Care Tel 01666 827272 eae ALWAYS UNPLUG THE VACUUM CLEA
5. NER FROM THE WALL SOCKET BEFORE INSPECTING IT Check that your supply corresponds to that shown on the rating plate The appliance must only be used as rated it should be fitted with an ASTA approved fuse to BS1362 European conformity information A sample of this product has been tested and found to be in conformity with the following European Directives 73 23 EEC Low voltage safety Directive 93 68 EEC CE Marketing Directive and 89 336 EEC EMC Directive For your convenience this appliance is supplied with a plug which is fitted with a 13amp fuse of the appropriate rating Never put the plug into the socket outlet without the fuse cover fitted Replacement fuse covers are available from Dyson Customer Care If the plug supplied is not suitable for your socket outlet it should be cut off and destroyed safely disposed of Warning Under no circumstances should the severed plug be inserted into a 13A socket serious danger of electric shock would result from the exposed wires The mains lead can then be shortened to the minimum required length suitably prepared and the correct style of plug to suit your household wiring system should be fitted The following wiring instructions should be followed If in doubt consult a qualified electrician Unwanted products and the environment Should you find that your product needs replacing one day or is of no further use to you think of protecting the environment Dyson will accept your old produc
6. comes exposed keeping inspection flap raised Look through 2 to see if light is visible and to check 2 Look down wand and check for daylight Remove any blockage with a stiff wire that the passage is clear of 2 any blockages A TS 3 Remove clear bin and cyclone top by lifting up until it releases a Then gently pull off 6 Check yellow bin inner Check that yellow bin from ball socket Cone seal inner is in place i 7 A gt especially if you have washed it See How to use section in your instructions Remove hose from machine by pressing yellow button behind bin cavity Do not remove cone seal Check cone seal is in place failure to do so could result in clogging O When returning hose Cone seal of the pre filter and ensure the yellow button damage to the motor clicks into place A tool may be required to The lip of the cone seal ease re assembly should sit over the rim of the yellow bin inner O Check for any blockages in hose and remove DYSON CUSTOMER CARE pal Cyclon fait you are still unable to get suction call ETE URY HILL cHnoros MALMESBURY d son Dyson Customer Care on eae y 01666 827272 ENGLAND SN16 ORP Check both filters whenever the bin is emptied and replace as necessary Please note that if the filters are not checked regularly and changed as required the motor
7. oi CE ITT O ual Cyclon o yson Operating manual Please read carefully before assembling or using your DCO1 vacuum cleaner Important safety instructions please read before use WHEN USING THE DYSON DCOl VACUUM CLEANER PLEASE ADHERE TO THESE SIMPLE PRECAUTIONS BY DOING SO YOU WILL REDUCE THE RISK OF FIRE ELECTRICAL SHOCK OR INJURY Do not leave your Dyson cleaner with the plug connected to a mains outlet unplug when not in use Turn the cleaner off with the switch button of the openings blocked with any object that may restrict the airflow 13 Static charge can occur in many ways and when vacuuming certain carpets may generate small static charges in the clear bin These are entirely at rs i i 7 Do not pull on the supply cord run over it or pull i i 9 ee z before removing from the mains outlet EARE SETO CEE E ER EEE a and are not S wit i pees z r A minimise an from this not Always remove the plug from a mains outlet If damaged call the Dyson Helpline Do not aha a a pam ite wus re a S A z a t r hand or insert an t into t r before carrying out any maintenance Do not handle the cleaner or plug with wet hands Cat A E N E NS carry out cny maintenance were cnane dearer bin unless you have first emptied and rinsed out n a a ees i 8 Do not use the cleaner if the cord or plug are the dlear bin with water Ohar ua GH OUE Ti dia manie damaged or if the cleaner has been damaged Ba ieni ar A i i b ners w
8. rus rs may marl especially where electrical components are dropped or has come into contact with water or PE A f a a VAS betes pai of smooth floors concerned any other liquid In these cases contact the Do not use without the clear bin assembly fitted Helpline 15 Ensure that hands feet and fingers particularly those of small children are kept away from the correctly and both filters in place 9 Do not use the cleaner to pick up water or any i i i y et i cleaner and especially from the brush bar Do not fit anything other than Dyson spare parts other liquid Electrical shocks could occur if used a E cen es R Re s A b n ri r contin rn available on the Helpline on 01666 827272 outdoors or on wet surfaces E gtd o o e E S C A AET z while the hose is in use ensure that the cable is Use of non Dyson parts could invalidate your 10 Do not use the cleaner to pick up flammable or i A j clear of the machine during this operation and guarantee combustible substances or hot ashes or burning a 5 Mees i aL R that the cleaner is not placed near anything objects of any kind Do not use near suc A A Do not continue to use the cleaner if any part R x which may come into contact with the brushbar rs t faulty missing or dam In SU SCE ote See gibeirauliy P En S a pa 17 The exhaust air exits from the side of the cleaner the S ntact t son n n i a se cases contac e Dyso elpline o 11 Do not work below the cleaner on the s
9. tairs Ploacemoncurenthaticarcnlontakenmahen 01666 827272 A 5 3 a 12 Do not immerse the whole cleaner in water for vacuuming near gas fires boilers or open fires Do not put any part of the body clothes or any object near or into the openings or moving parts of the machine Do not use the machine with any cleaning The clear bin alone may be washed out after emptying Ensure this is completely dry before using the cleaner again whether lit or unlit Always avoid directing the exhaust towards naked flames qual CyClong J y son Facsimile Contact for all service assistance 01666 827298 Helpline 01666 827272 DYSON CUSTOMER CARE TETBURY HILL MALMESBURY WILTSHIRE ENGLAND SN16 ORP 03 28 185 05 28 048 10 02 97 REV1 1 Getting started Assemble the machine as follows Wand amp hose assembly Accessory tool location Push yellow hose cuff firmly over wand end with twisting motion All tools are stored neatly on the tool storage posts Tool adaptor Q Guide wand into hose keeping it straight 2 Locate wand handle into socket from 9 above Push home until it clicks into place Cord storage Wrap cord around both cable winders Rotate top quick release cable winder Ensure hose does not kink when replacing wand to release cable O Insert tool onto end of wand 4 as shown E O For cleaning awkward places
10. ts and recycle them in an environmentally friendly way IMPORTANT The wires in the mains lead are coloured in accordance with the following codes Brown Live Blue Neutral As the colours of the wires in the mains lead may not correspond with the colours or markings identifying the terminals in your plug proceed as follows The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black The wire that is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red Neither wire should be connected to the earth terminal of a three pin plug which is marked with the letter E or or coloured Green or Green and Yellow Always ensure that the cable clamp is fitted and that it clamps the cable outer and NOT the coloured wires If the supply cord of the appliance is damaged disconnect the appliance from the socket outlet immediately The supply cord must be replaced and only by Dyson Appliances Ltd or their appointed agent as special purpose tools and service techniques are required ual Cyclon dyson Facsimile Helpline 01666 827272 01666 827298 Contact for all service assistance DYSON CUSTOMER CARE TETBURY HILL MALMESBURY WILTSHIRE ENGLAND SN16 ORP
Download Pdf Manuals
Related Search