Craftsman Harmonic Balancer Puller Owner's Manual
Contents
1. CRAFTSMAN To Remove Harmonic Balancer Before removing harmonic balancer it may be necessary to first remove the radiator 1 Remove the retaining bolt from the balancer 2 Carefully choose the proper size bolts that fit the holes in the balancer This kit includes 6 perm black oxide plated 3 8 24 x 2 in fine pitch bolts e Vase zinc plated 5 16 18 x 2 in coarse pitch ts e Three yellow plated M8 1 25 x 80mm metric bolts e n black oxide plated 3 8 16 4 in coarse pitch ts 3 Insert bolts through the slots in the puller making sure that the washer head rests on the FLAT side of the casting 4 Carefully thread the bolts into the balancer evenly 5 Select the flat or pointed cap as needed and fit over the end of the large center forcing screw Turn forcing screw slowly until balancer is removed 947626 To Remove Steering Wheel 1 2 DO NOT use a hammer to remove the steering wheel Damage to the wheel can result Select the bolts included that EXACTLY match the hole diameter and pitch with those on the steering wie if the bolts do not match do not use this puller Check for alignment marks on the wheel and shaft If there are no marks make them on the wheel before removing it to help ease re alignment during assembly Insert bolts through puller casting and screw into wheel Make sure the washer head of the bolt is seated on the FLAT side of the casting Turn the large forcin2. g sighed slowly until the wheel is 53496 47626 FULL UNLIMITED WARRANTY ON CRAFTSMAN HAND TOOLS if this Craftsman Hand Tool ever fails to provide complete satisfaction RETURN IT TO THE NEAREST SEARS STORE OR OTHER CRAFTSMAN OUTLET and it will be replaced free of charge NOTE Always wear safety glasses or eye shields This warranty gives you specific legal rights and you may also have other rights which vary from state to state Sears Roebuck and Co Dept 817WA Hoffman Estates IL 60179 CONTENTS MADE IN USA Sold by Sears Roebuck and Co Hoffman Estates IL 60179
Download Pdf Manuals
Related Search