Cornelius P/N 620024406 User's Manual
Contents
1. CORNELIUS INC One Cornelius Place 55303 6234 Telephone 800 238 3600 Facsimile 612 422 3246 INSTALLATION INSTRUCTIONS K STYLE LID KIT P N 629083501 REAR MOUNT These K style kits apply to the following ice makers and are for use with DF ED 200 250 dispensers Ice Maker Size Manitowoc Q200 450 600 800 301 Table 1 Loose Shipped Parts 1 620024406 Lid Assembly K Style s soso 5 s2ooi0101 irstataton moruen iS 1 Setice maker lid on the top of the dispenser and position it flush with the back and sides of the dispenser 2 Using the slotted holes in the lid as a template drill four 4 1471 diameter holes at the bottom of the slots see detail A Use extreme care not to drill into the hopper Fasten the lid to the dispenser with four 4 10 sheet metal screws two on each side 3 Seal the ice maker to the top of the dispenser as follows A Apply beads of RTV around the opening in the lid and inside the perimeter of the ice maker outline so that the ice maker will set on the RTV B Setthe ice maker onto the lid and position it as required front flush with rear of lid C Wipe away any excess RTV 4 Install Mounting Brackets Item 2 by drilling 147 diameter holes into the adapter lid and ice maker cabinet using brackets as templates Use extreme caution not to drill into any ice maker components condenser tubing etc Secure the b2. rackets using the screws provided 5 Follow the ice maker manufacturers instruction to complete the installation of the ice maker including the bin thermostat if so equipped or required Note Bin thermostat must not interfere with agitator rotation Note Front of the ice maker radius must be flush with the back of the lid item 1 March 1998 620910101 1 RevA DRILL 147 HOLES USING BOTTOM OF SLOTTED HOLES AS A TEMPLATE DETAIL A ENLARGED 30 000 24 500 FRONT OF ae ICEMAKER SEAL ICE MAKER 1 WITH ITEM 3 NG N 7 NN 3 Sx S NY 2 S SS D 1 SS DETAIL A March 1998 RevA 2 620910101
Download Pdf Manuals
Related Search