Cornelius 2267 User's Manual
Contents
1. IMI CORNELIUS INC One Cornelius Place Cornelius ee INSTALLATION INSTRUCTIONS KIT P N 2267 amp 2329 Remcor model DB100 150 dispenser with 1 Manitowoc Series B320 420 Ice Maker Refer to Fig 1 2 Ice O Matic Series GC300 Ice Maker Refer to Fig 2 1 Seal cover to dispenser as follows A Apply a bead of RTV on the hopper flange B Setcover onto the dispenser Be careful not to disrupt the dispenser cabinet labels if present C Wipe away excess RTV immediately D Cover must be sealed completely to the dispenser hopper Seal any gaps between the cover and hop per 2 Seal ice maker to the dispenser cover as follows A Locate the outline of the ice maker on the dispenser as shown B Apply a bead of RTV on the dispenser cover around the ice maker frame sides and rear C Setice maker on the cover D Wipe away excess RTV immediately 3 Secure the ice maker to the dispenser with the brackets provided Drilling must not interfere with any ice maker components 4 Install adhesive backed gasket strip to the removable lid 5 Follow the manufacturers instructions to complete the installation of the ice maker 91890 1 12 16 96 RevB Revised 10 10 97 12 16 96 Revised 10 10 97 APPLY RTV ALONG BOTTOM EDGE OF ICE RAMP AND FRONT HOPPER LIP COOMPLETE COVER MUST BE SEALED TO HOPPER ICEMAKER TO BE FLUSH WITH BACK EDGE OF COVER ADD INSULATION STRIP TO FLANGE OF REMOVABLE LID APPLY RTV AROUND I2. NSIDE OF ICEMAKER OUTLINE ON DISPENSER COVER TO FORM A SEAL SIDES AND FRONT REMOVE ICEMAKER PANEL B320 AND 420 SCREWS THAT ARE IN LINE WITH COVER HOLES AND INSTALL MOUNTING BRACKETS WITH SCREWS PROVIDED 4 REMOVABLE FRONT LID FOR MANUAL ICE FILLING APPLY RTV ALONG HOPPER FLANGE ALL AROUND FOR PROPER SEAL COMPLETE COVER MUST BE SEALED TO HOPPER ICEMAKER TO BE FLUSH WITH BACK EDGE OF COVER ADD INSULATION STRIP TO FLANGE OF REMOVABLE LID APPLY RTV AROUND INSIDE OF ICEMAKER OUTLINE ON DISPENSER COVER TO FORM A SEAL 4PLCS OPTIONAL MOUNTING BRACKETS 2 GC300 USING EXISTING HOLES MOUNT BRACKETS 4 WITH 1 4 20 SCREWS USING UPPER HOLES AS TEMPLATE DRILL 4 136 DIA HOLES TO SECURE ICEMAKER AND DISPENSER DRILLING IS NOT TO INTERFERE WITH ICEMAKER COMPONENTS IF THERE IS INTERFERENCE USE OPTIONAL MOUNTING BRACKETS 2 REMOVABLE FRONT LID FOR MANUAL ICE FILLING 91890 RawR
Download Pdf Manuals
Related Search