Coleman 4-POLE User's Manual
Contents
1. grommet located on the web strap long end of the sun shade Fig 2 3 Lift pole to upright position then extend out the guylines tied onto the web strap Fig 2 4 Slip loop on each guyline over plastic stake and drive in at a slight angle to secure Fig 3 5 Repeat steps 3 amp 4 above for the remaining long Metal Pole and guylines 6 Insert narrow metal tip on short Metal Pole into metal grommet located on the web strap at the front of the sun shade Fig 2 7 Lift short Metal Pole to upright position then extend out the guyline tied onto the web strap Fig 2 8 Slip loop on guyline over plastic stake and drive in at a slight angle to secure Fig 3 9 Repeat steps 6 amp 7 above for the remaining short Metal Pole and guyline 10 Extent out remaining guylines at back of the sun shade until taut and secure with plastic stakes Fig 2 continued on other side Things You Should Know e Tree limbs tree sap bird droppings or moisture steadily dripping off tree limbs can cause damage to the sun shade fabric and its coating resulting in leaks or loss of flame resistant properties Never store this product even for a short period of time without drying it thoroughly and brushing off caked dirt Do not pack stakes or poles inside your this product Use a separate storage bag Stakes should be removed by pulling on the stake itself NEVER PULL ON THE SUN SHADE TO REMOVE STAKES AS THIS COULD RESULT IN PROPERTY DAMAG2. E OR PERSONAL INJURY Metal poles should not be left telescoped together during storage Do not leave this product set up for weeks at a time Be aware that exposure to ultraviolet rays from the sun can seriously damage material and or cause it to become discolored This product is intended to provide protection from sunlight It is not intended to be used during heavy rain wind hail snow or other inclement weather Excess water build up can cause the frame system to become unstable and possibly collapse causing injury A WARNING Keep all flame and heat sources away from this tent fabric This tent meets the flammability requirements of CPAI 84 The fabric may burn if left in continuous contact with any flame source The application of any foreign substance to the tent fabric will render the flame resistant properties ineffective The Coleman Company Inc 3600 N Hydraulic Wichita Kansas 67219 1 800 835 3278 www coleman com MADE IN CHINA PRINTED IN CHINA 2008 The Coleman Company Inc Coleman Q and are registered trademarks of The Coleman Company Inc 4010004155 20081030 ANI HOLILS
3. STITCH LINE 4 POLE SUN SHADE moner 2000001652 Before you begin Read all instructions before set up e Select a level site clear of rocks branches and other hard or sharp objects to install your sun shade WARNING Keep clear of overhead power lines e Do not set up your sun shade under trees because of potential lightning strikes or falling tree limbs in inclement weather e Secure with all stakes and guylines provided to prevent property damage or personal injury e For best results in windy conditions position narrow end of sun shade into the wind e Enlist the help of at least one other person to assist you when it is time to assemble the sun shade e Under no circumstance should this product be used to cover automobiles marine products or similar ASSEMBLY PARTS Sun Shade 1 _ Guyline Grommet for long Metal Pole Guyline a a Grommet for long Metal Pole Grommet for Short Metal Pole Grommet for Short Metal Pole Fig 1 Metal Poles long 2 Metal Poles short 2 Part No 5010000656 Part No 5010000657 Metal Pole Tip Metal Pole Tip in Grommet in Grommet Metal Pole Tip ss bss in Grommet a VA l Front of Sun Shade Metal Pole Metal Pole Tip Metal Pole short long in Grommet Fig 2 Guylines a Metal Pole short lt ki om Shade Assembly Metal Pole long Assemble the shock corded short and long Metal Poles Fig 1 Insert narrow metal tip on long Metal Pole into metal
Download Pdf Manuals
Related Search