Home

Clarion DXZ948RMP User's Manual

1. the brightness of the display is dimmed according to the brightness detected by this sensor e Set the dimmer setting at DMR LEVEL e The factory default setting is AUTO 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select DIMMER IN under APPERNCE ADJ UST MODE DIMMER IN AUTO APPERNCE 3 Either touch on the right of the display or turn the ROTARY knob to select AUTO or ILLUMI 4 Press the A button to return to the original mode Setting the dimmer level DMR LEVEL This function allows you to set how much the displayed is to be dimmed e The factory default setting is 3 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select DMR LEVEL under APPERNCE ADJ UST MODE DMR LEVEL 3 APPERNCE 3 Either touch 4h on the right of the display or turn the ROTARY knob to set the dimmer level Select one of OFF dimming OFF bright 1 slightly dimmed to 5 dark 4 Press the A button to return to the original mode Adjusting the contrast of the display CONTRAST You can adjust the contrast of the display to match the mounting angle of the unit e The factory default setting is 6 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select CONTRAST
2. 2 Load the disc into the CD SLOT When the disc is loaded the control panel automatically closes after several seconds and play starts Notes e Never insert foreign objects into the CD SLOT e If the CD is not loaded easily there may be another CD in the mechanism or the unit may require service CD MP3 WMA Operations COMPACT COMPACT e Discs not bearing the alist or mark and CD ROMs cannot be played by this unit e Some CDs recorded in the CD R CD RW mode may not be usable Loading 8 cm compact discs No adapter is required to play an 8 cm CD Load the 8 cm CD into the centre of the CD SLOT Ejecting a CD You can eject a disc by pressing the 4 button even if the engine key or ACC is at the OFF position automatically A CAUTION When the disc is ejected press the 4 button to close the control panel If the control panel is left open You will hear a double beep and the control panel automatically closes 1 Press the 4 button The control panel opens and the disc is ejected The mode automatically switches to the radio mode Be sure to remove ejected discs from this unit If you leave the disc in the disc tray it is pulled back into the unit after 15 seconds or longer and the control panel closes auto reload function Single CDs are not auto loaded Be sure to remove single CDs after ejecting them A CAUTION If you use excessive force to load a disc after it has been
3. E OFF e The Dolby Pro Logic II mode is not used and the AC PROIII mode is used For details on the AC PROIII mode see Selecting each mode cf page 44 1 Press the SOUND button 2 Touch Dolby PLII OFF E Dolby PLII ern A MODE OFF OFF POSITION P EQ SOUND MENU 2 ZONE ADF OFF OFF 3 Touch on the right of the display to select the Dolby Pro Logic II mode The mode display is switched as follows MUSIC music mode gt MATRIX matrix mode gt OFF PL II off gt MUSIC music mode For details on the volume adjustment of the centre speaker sub woofer see page 45 4 Touch RIN Selecting the position menu With POSITION you can select from 5 types it takes for the sound to arrive from the speaker to your seat position Also the time alignment function allows pin point setting of speakers so that the same audio effect can be obtained from each speaker up to all listeners In the Selecting each mode procedure cf page 44 set AC PROIII to PRO e The factory default setting for POSITION is OFF and for the position basic menu is FRONT E Position menu This function is pre stored with 5 position menus Select the desired menu to suit your preference 1 Press the SOUND button 2 Touch POSITION OFF OFF POSITION P EQ SOUND MENU 2 ZONE ADF OFF OFF COFFE Dolby PLII A MODE
4. e For details on the title display see Switching the title display cf page 14 Screen displays in the changer mode E Main display CD changer mode This is displayed by pressing the ROTARY knob to select the CD changer mode Disc No display Title display Track playing time display Touching the left of the display for 1 second or longer switches the simple operation mode T04 01 18 mmm SIMPLE MODE 255 Title display Track playing time display Track playing time display T01 02 00 The No of the track currently being played and the playing time are displayed Touching 4 th or b gt in the normal mode allows you to select the track to play or fast forward back forward tracks Title display Touching this switches the display Disc No display If you touch 4 t in the normal mode you can select a disc MODE Touching this displays sub functions Touching and holding this for 1 second or longer displays the disc list T SCAN D SCAN This is displayed during scan play Touching T SCAN D SCAN ends scan play T RPT D RPT This is displayed during repeat play Touching T RPT D RPT ends repeat play T RDM D RDM This is displayed during random play Touching T RDM D RDM ends random play DISC Touching this starts play of the next disc lt q p gt only in the simple operation display Touching these selects the track to play Touching and holding these fast forw
5. Touching this displays the next folder list DXZ948RMP 31 CD MP3 WMA Operations What is MP3 MP3 is an audio compression method and is classified as audio layer 3 of the MPEG standard This audio compression method has gained ground into PC users and Become a standard format This MP3 features original audio data compression to about 10 percent of its initial size while keeping high sound quality intact This means that about 10 music CDs can be recorded on a CD R disc or CD RW disc to allow a long listening time without having to change CDs What is WMA WMA is the abbreviation of Windows Media Audio an audio file format developed by Microsoft Corporation Notes e If you play a file with DRM Digital Rights Management for WMA remaining ON no audio is output The WMA indicator blinks e Windows Media and the Windows logo are trademarks or stored trademarks of Microsoft Corporation in the United States and or other countries To disable DRM Digital Rights Management e When using Windows Media Player 8 click on TOOLS gt OPTIONS COPY MUSIC tab then under COPY SETTINGS unclick the check box for PROTECT CONTENT Then reconstruct files e When using Windows Media Player 9 click on TOOLS gt OPTIONS MUSIC record tab then under COPY SETTINGS unclick the check box for PROTECT CONTENT Then reconstruct files Personally constructed WMA files are used at your own respons
6. batteries that came with the remote control unit facing in the directions shown in the figure then close the rear cover Notes Using batteries improperly can cause them to explode Take note of the following points e When replacing batteries replace both batteries with new ones e Do not short circuit disassemble or heat batteries Ze e Do not dispose of batteries into fire or flames Za e Dispose of spent batteries properly 1 Turn the remote control unit over then slide AA SUM 3 R 6 1 5V Rear cover Rear side 10 DXZ948RMP Functions of Remote Control Unit Buttons CD changer Switches among radio DAB CD MP3 AUX CD changer DVD changer and TV Leef Ken lt 4 gt gt MUTE TA DISP PS AS Switches reception band Moves preset channels up and down MUTE Turns mute on and oft TA on and off Plays the first track Top play Moves the next disc in increasing order Moves tracks up and down When pressed and held for 1 second or longer Fast forward fast backward Switches reception band Increases and decreases volume in all modes Moves preset channels up and down Press and hold the button for 1 second or longer to switch the main and sub zone sound source only while 2 ZONE mode on Preset scan When pressed and held for 2 seconds or longer Auto store AF function on and off When pressed and held for 1 second
7. played sult your store of purchase ERROR 3 A DISC cannot be played due to scratches Retry or replace with a non scratched non etc warped disc ERROR 6 A DISC inside the DVD changer cannot be Eject the disc then reload it properly played because it is loaded upside down ERROR P Parental level error Set the correct Parental level ERROR R Region code error Eject the disc and replace correct region code disc lf an error display other than the ones described above appears press the reset button If the problem persists turn off the power and consult your store of purchase Bees el E E O Q O CX Q e o ta O m gt Q 68 DXZ948RMP 10 SPECIFICATIONS Radio section Tuning System PLL synthesizer tuner Receiving Frequencies FM 87 5 to 108 MHz 0 05 MHz steps MW 531 to 1602 kHz 9 kHz steps LW 153 to 279 kHz 3 kHz steps CD player section System Compact disc digital audio system Frequency Response 5 Hz to 20 kHz 1 dB Signal to Noise Ratio 100 dB 1 kHz IHF A Dynamic Range 96 dB 1 kHz Distortion 0 01 Note General Output Power 4 x 31 W DIN 45324 B 14 4V Power Supply Voltage 14 4 V DC 10 8 to 15 6 V allowable negative ground Power Consumption Less than 15 A Speaker Impedance 4 Q 4 to 8 Q allowable Auto Antenna Rated Current 500 mA or less Weight Main unit 1 7 kg Remote control unit 80 g including battery Dimensions Main unit 178 W x 50 H
8. touch bottom right left top right and dius tuncuon prevents persons wno co not know then right in that order or press SCN on the the touch sequence from easily operating this remote control unit unit The Touch Code display appears when DCP is attached and the power is turned ON with CODEMATIC set to ON If you touch the display in this screen in the preset order SUCCESSFUL is displayed and the power is turned OFF When the power is next turned ON the Touch Code display does not appear and the main display in the radio mode or CD mode is displayed 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select CODEMATIC under SETTING ADS OST MODE CODEMATIC ON 2 types of items are displayed for CODEMATIC items for which ON or OFF is displayed at the right of the screen and items for which INPUT is displayed at the right of the screen Here select the item for which ON or OFF is displayed at the right of the display 3 Either touch W on the right of the display or turn the ROTARY knob to select ON or OFF 4 Touch on the setting item display to select CODEMATIC under SETTING Here select the item for which INPUT is displayed at the right of the display 5 Touch INPUT The Touch Code display appears 6 Enter the touch code Touch one
9. x 155 D mm Remote control unit 44 W x 110 H x 27 D mm e Specifications and design are subject to change without notice for further improvement DXZ948RMP 69
10. DISPLAY ADJ UST MODE S A SENS MID DISPLAY 3 Either touch 4h on the right of the display or turn the ROTARY knob to adjust the sensitivity Select either LOW small deflection amount MID or HIGH large deflection amount 4 Press the A button to return to the original mode Adjusting the display scroll speed SCROLL This feature allows you to slow down the scroll speed when the scroll speed is too fast making it difficult to view the screen e The factory default setting is SPEED 2 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select SCROLL under DISPLAY ADJ UST MODE SCROLL SPEED2 DISPLAY 3 Either touch W on the right of the display or turn the ROTARY knob to adjust the sensitivity This setting item can be adjusted within the range SPEED 1 to SPEED 7 Adjust this setting item while viewing how the appearance of the display changes Operations Common to Each Mode 4 Press the A button to return to the original mode Setting the auto dimmer DIMMER IN This function allows you to dim the lighting of the display matched to the illumination or the brightness inside your car Select either AUTO interlocked to the brightness inside your car or ILLUMI interlocked to the illumination inside your car as the auto dimmer setting e When the auto dimmer function is set to AUTO
11. Either touch W on the right of the display or turn the ROTARY knob and adjust the item as desired Select YES or NO for PANORAMA o DIMENSION can be adjusted within the range 0 to 6 CTR WIDTH can be adjusted within the range 0 to 7 4 Press the A button to return to the original mode AUX function This system has an external RCA input so you can listen to sounds and music from external devices connected to this unit Selecting AUX TEL You can listen to sound and music from external devices or your telephone calls from the speakers when connected to this unit When TEL INT or External device is connected to this unit you can select the TEL mode or AUX mode e The factory default setting is AUX 1 Press the A button to set the adjust mode DXZ948RMP 47 Operations Common to Each Mode 2 Touch 4 on the setting item display to select AUX TEL under SETTING ADS OST MODE AUX TEL AUX 3 Either touch W on the right of the display or turn the ROTARY knob to select AUX or TEL AUX The AUX TEL input cable is for external Audio input TEL The AUX TEL input cable is for cellular phone audio input 4 Press the A button to return to the previous mode Setting the input level AUX SENS of portable audio AUX mode This function allows you to set the input level of optional external devices connected
12. FM3 1 A 6 When preset scan is performed in an AM broadcast AM stations are received as follows AM 1 gt 6 gt AM 1 6 and so forth E To cancel preset scan 1 Touch P SCAN The P SCAN display changes to MODE and the stations that were being received when P SCAN was touched are received next DXZ948RMP 25 RDS Operations RDS Radio Data System This unit has a built in RDS decoder system that supports broadcast stations transmitting RDS data This system can display the name of the broadcast station being received PS and can automatically switch to the broadcast station with the best reception as you move over long distances AF switching lf a traffic announcement or programme type is broadcasted from an RDS station this broadcast is received no matter what mode you are in Also if EON information is received this information enables automatic switching of other preset stations on the same network and interruption of the station being received with traffic information from other stations TP This function is not available in some areas When using the RDS function always set the radio to the FM mode e AF Alternative Frequency e PS Programme Service Name e PTY Programme Type e EON Enhanced Other Network e TP Traffic Programme e Pl Programme Identification e TA Traffic Announcement RDS interrupt does not function during AM radio reception o When this unit
13. For details on the AF function cf page 26 refer to the section RDS operation of the respective owner s manual To switch the AF function ON To switch the AF function OFF AF function between RDS and DAB When the same programme is broadcast by both RDS and DAB and this function is ON the main unit automatically switches to receive the broadcast with the better reception TA Traffic Announcement When a traffic announcement broadcast starts in the TA standby mode the traffic announcement broadcast is received as top priority regardless of the function mode Traffic programme TP automatic tuning is also possible e This function can only be used when TP is lit in the display When TP is lit this means that the DAB or RDS broadcast station being received has traffic announcement programmes e For details on TA cf page 27 refer to the section RDS operation of the respective owner s manual To set the TA standby mode To cancel the TA standby mode To search for a TP station Digital Radio DAB Operations Notes e Ifa TP station is not received the main unit stops the search operation e TP may be lit in the display when a TP broadcast is transmitted from an RDS station In this case press the TA button to perform TP seek tuning Press the TA button again to return to the previous mode INFO Announcement In the INFO standby mode when the sele
14. No sound effect e The factory default setting for OFF Notes e As the volume changes when ADF is switched switch ADF with the volume and SW VOLUME sub woofer and CTR VOLUME center speaker turned down as far as possible e On some speaker systems sufficient effect sometimes cannot be obtained If this happens adjust the ADF parameter or the volume e When ADF is set to USER 1 2 or 3 the VSE function and BASS TREB function under EQ SELECT are disabled 1 Press the SOUND button 2 Touch ADF OFF OFF OFF gt E POSITION P EQ Dolby PLII erg 2 ZONE ADF A MODE OFF OFF Basic Operations Touch 4 W on the right of the display to select the ADF mode When ADF is set to OFF the ADF setting is not reflected on the music source This ends the ADF setting Press the SOUND button to return to the original mode Select one of USER 1 2 3 or OFF To change the details of the ADF setting press the A button Touch 4th 4on the adjustment item display to select the desired item Each touch of t switches the adjustment item display as follows Adjustment item when USER is selected in step 3 BASS TREBLE A COMP BASS Adjustment item when 1 to 3 is selected in step 3 LEVEL COMP LEVEL Touch t on the right of the display to adjust the item BASS and TREBLE can be adjusted
15. Repeat play continuously plays the current track This function continues automatically until it is canceled 1 Touch MODE 2 Touch T REPEAT The MODE display changes to T RPT and repeat play is started E To cancel repeat play 1 Touch T RPT The T RPT display changes to MODE and regular play starts from the track that was playing when you touched T RPT Disc repeat play After all the tracks on the current disc have been played disc repeat play automatically replays the current disc over from the first track This function continues automatically until it is canceled 1 Touch MODE 2 Touch D REPEAT The MODE display changes to D RPT and disc repeat play is started WE To cancel disc repeat play 1 Touch D RPT The D RPT display changes to MODE and regular play starts from the track that was playing when you touched D RPT DXZ948RMP 53 CD Changer Operations Random play Random play selects and plays individual tracks on the disc in no particular order This function continues automatically until it is canceled 1 Touch MODE 2 Touch T RANDOM The MODE display changes to T RDM and random play starts E To cancel random play 1 Touch T RDM The T RDM display changes to MODE and regular play starts from the track that was playing when you touched T RDM Disc random play The disc random play selects and plays individual tracks or discs automatica
16. STORE for 2 seconds or longer The MODE display changes to A STORE and the preset No in the auto store operation appears on the preset No display Stations with good reception are automatically searched and are stored to preset memory No 1 to No 6 in order from the station having the lowest frequency Notes e When auto store is performed stations stored to memory so far are cleared e When there are fewer than 6 stations with good reception in LOCAL SEEK low frequencies are automatically returned to and auto store is performed again by DX SEEK If there are fewer than 6 stations even after auto store is performed twice stations stored so far remain in memory e If auto store is performed in the FM bands the Stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations Radio Operations Preset scan Preset scan is a function for receiving stations in the order that they are currently stored to preset No so that broadcasts can be checked 1 Touch MODE 2 Touch P SCAN The MODE display changes to P SCAN and the preset No in the preset scan operation is displayed in the preset No display The currently stored stations are received in order for 7 seconds or longer each Stations with poor reception are skipped and the next station is received When preset scan is performed in an FM broadcast FM stations are received as follows FM1 1 6 gt FM2 1 gt 6 gt
17. SUCCESSFUL will appear on the display If you hear a short beep this indicates that calibration failed Repeat the procedure from step 3 5 Next adjust the sensitivity Touch 4 on the setting item display to select A VOL SENS under SETTING ADS UST MODE A VOL SENS LOW 6 Either touch on the right of the display or turn the ROTARY knob to select the sensitivity Each time you turn the ROTARY knob the setting changes in the following order OFF no change in volume gt LOW change in volume small gt MID LOW A MID gt MID HIGH HIGH change in volume large 7 Press the A button to return to the previous mode Performing a system check This function allows you to perform a system check from the adjust mode when required 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select SYSTEM CHECK under SETTING ADS UST MODE SYSTEM CHECK START 3 Touch and hold START for 1 second or longer System Check appears on the display 4 Press the ROTARY knob The system check starts When the system check is complete Completed appears on the display 5 Press the ROTARY knob again The main display for the radio mode appears DXZ948RMP 49 Operations Common to Each Mode Using the security function E To cancel CODEMATIC DEMATI If you have forgotten the touch order either CO C
18. adjusted within the range 6 to 6 5 Repeat steps 3 and 4 to adjust the desired Item 6 Press the SOUND button to return to the original mode AC Processor Ill Operations Dolby Pro Logic Il Dolby Pro Logic Il is a matrix decoding technology in which updated digital matrix technology is applied and Dolby Pro Logic is further improved Dolby Pro Logic II realizes excellent 5 1 channel reproduction of Dolby surround source as well as stereo sound sources such as CDs thereby causing a surround channel to be full ranged 20 Hz to 20 kHz and become stereo Therefore you can enjoy any stereo sources with dynamic sound of 5 1 channel The Music Mode or Matrix Mode can be selected according to a source to be reproduced This product is manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Selecting the PL Il menu Dolby PL Il Select the MUSIC mode or the MATRIX mode matched the source you are to play as the Dolby Pro Logic II mode e The factory default setting is OFF E MUSIC music mode e This mode is suited for stereo sound sources such as CDs Another adjustment mode that enables more detailed adjustment is also available as the sound field spreads differently depending on the state of the recorded music source See page 47 E MATRIX matrix mode e This mode is suited for sound sources such as AM FM radio
19. and damage the unit Turning ON OFF the power Turning on Note e Be careful when using this unit for a long time without running the engine If you drain the car s battery too far you may not be able to start the engine and this can reduce the service life of the battery 1 Press the ROTARY knob The mode that was previously active is displayed System check The first time that this unit is turned on after wire connections are completed this unit checks which equipment is connected This is called the system check When the power is turned ON and System Check is displayed follow the procedure below to perform the system check 1 When System Check appears on the display press the ROTARY knob The system check starts When the system check is complete Completed appears on the display 2 Press the ROTARY knob again The main display for the radio mode appears 12 DXZ948RMP CODEMATIC function When CODEMATIC is set to ON and the power is turned ON with the DCP attached the Touch Code display appears Touch the display in the order that was set in the adjust mode For details on the CODEMATIC function see Using the security function CODEMATIC cf page 50 Turning off 1 Hold down the ROTARY knob for 1 second or longer Selecting a mode 1 Press the ROTARY knob to change the operation mode 2 Each time you press the ROTARY knob t
20. at a time In the quick tuning mode you can quickly tune the desired frequency 1 Touch and hold BAND for 1 second or longer while MANU is not displayed Manual tuning is possible when MANU is displayed 2 Operate the frequency display to tune to a frequency on which there is a broadcast Step tuning Touch th on the frequency display Quick tuning Touch W gt on the frequency display Tuning stops when you take your finger away from the panel Recalling a preset station Recalling a preset station is a function for tuning pre stored stations 1 Touch and hold MODE for 1 second or longer The preset memory list is displayed 2 Touch the station you want to listen to In the normal mode preset No can also be tuned by touching th in the main display E To cancel tuning 1 Touch RTN Preset memory A total of 24 preset positions 6 FM1 6 FM2 6 FM3 6 AM exists to store individual radio stations in memory 1 Touch BAND to switch the reception band 2 Operate the frequency display to store the station to 3 Touch and hold MODE for 1 second or longer The preset memory list is displayed 4 Touch and hold the preset No to store the station to for 2 seconds or longer You will hear a long beep and the station is stored in memory Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially 1 Touch MODE 2 Touch and hold A
21. button to set the adjust mode 2 Touch 454 on the setting item display to select TEL SWITCH under SETTING ADS UST MODE TEL SWITCH OFF 3 Either touch 4h on the right of the display or turn the ROTARY knob to select the settings Each time you turn the ROTARY knob the setting changes in the following order OFF ON A MUTE A OFF OFF This unit continues normal operation even when the cellular phone is used Operations Common to Each Mode Note e When connecting a hands free kit make sure that the setting is ON to receive the telephone audio through the system ON You can listen to your telephone calls from the speakers connected to this unit When listening to your calls on your car speakers you can adjust the volume by turning the ROTARY knob MUTE The sound from this unit is muted during telephone calls 4 Press the A button to return to the previous mode Setting the auto volume function CALIBRATE A VOL SENS You can automatically change the volume to match your car s speed e The factory default setting is LOW 1 Press the A button to set the adjust mode 2 Touch 4 on the setting item display to select CALIBRATE under SETTING ADJ UST MODE START CALIBRATE 3 Accelerate to a speed of 50 km 4 When you reach 50 km touch START Calibration is executed After 2 seconds or longer you will hear a long beep and
22. cf page 30 refer to the section RDS operation of the respective owner s manual Volume setting of TA INFO emergency broadcast ALARM and PTY The volume for TA INFO ALARM and PTY interrupt broadcasts can be set during TA INFO ALARM and PTY interrupt broadcasts Perform the following operation depending on the connected model e The factory default setting is 15 During a TA INFO ALARM or PTY interrupt broadcasts turn the ROTARY knob clockwise or counterclockwise to set the volume to a desired level 0 to 33 When the TA INFO ALARM or PTY interrupt broadcast ends the volume returns to the level that was active before the interrupt broadcast 5 1ch Surround Decoder Operations When an optional CeNET wiring compatible 5 1ch surround decoder is connected the 5 1ch surround decoder can be controlled on this unit The following functions change when a 5 1ch surround decoder is connected e Two modes MOVIE and VIRTUAL are added to the Dolby Pro Logic II mode e The VSE POSITION mode is changed to the DSF Digital Sound Field mode e In the P EQ Parametric Equalizer mode the settings of each speaker can be adjusted in even more detail Settings relating to music in setting items cf page 39 are changed Selecting PL II Dolby PL Il Select one of the available four modes matched to the source you are to play as the Dolby Pro Logic II mode e The factory default s
23. function is available only when a CD R CD RW recorded with MP3 files or WMA files is loaded 1 Touch MODE 2 Touch f REPEAT The MODE display changes to fg RPT and folder repeat play is started E To cancel folder repeat play 1 Touch PHI The RPT display changes to MODE and regular play starts from the track that was playing when you touched PaT Random play This function allows you to play all tracks recorded on a disc in a random order RANDOM Plays all tracks on the disc at random When the disc contains 2 or more folders all of the tracks in the folder are played at random followed by all of the tracks in the next folder This is repeated for all folders f RANDOM Plays tracks on the disc at random This function is available only when a CD R CD RW recorded with MP3 files or WMA files is loaded 1 Touch MODE 2 Touch RANDOM or fy RANDOM The MODE display changes to RDM or fa RDM and random play starts E To cancel random play 1 Touch RDM or f RDM The RDM display or RDM display changes to MODE and regular play starts from the track that was playing when you touched these buttons DXZ948RMP 35 Different Pieces of Music Heard by Plural Listeners 2 ZONE function The 2 ZONE function outputs separate sounds from the MAIN zone and SUB zone by simultaneously operating 2 sources in the 1 centre unit thereby allowing 2 or more l
24. in a straight line from the centre of the compact disc to the circumference e Do not use any solvents such as commercially available cleaners anti static spray or thinner to clean compact discs e After using special compact disc cleaner let the compact disc dry off well before playing it 2 CONTROLS Main unit Photo Snsor 4 RELEASE a a SSE y ROTARY IR Receiver Y Z PUSH FNC PWR Eu PTY K e Eee Display With the SLOPING CONSOLE opened L CD SLOT DXZ948RMP 5 3 NOMENCLATURE Names of the Buttons and their Functions RELEASE button e Remove the DCP Photo Sensor e This sensor detects the brightness inside your car When the auto dimmer function is set to AUTO the brightness of the display is dimmed according to the brightness detected by this sensor ROTARY knob Press the knob to turn the power ON Each press of this knob switches the mode Press and hold the knob for 1 second or longer to turn the power OFF e This knob can also be turned to adjust the volume or to adjust the various settings in the adjust mode 4 button e Opens closes the control panel If a disc is already loaded it will be ejected when the control panel is opened Note If the disc is not ejected hold down the 4 button for 1 second or longer A button e Use this button to set or adjust the various
25. new title is stored beyond the maximum number of titles In the case of a TV station Titles not stored to preset channels are automatically cleared and the new title is stored in memory In the case of a CD Titles of CDs that have been played the least are cleared and the new title is stored in memory Operations Common to Each Mode Clearing titles The mode changes to the adjust mode 1 Either receive the TV station or play a CD ADJ UST MODE whose title you want to clear 257 SCREEN SVR ON 2 Touch the centre of the display to set to the user title display When the display changes to the user title 2 Touch 4 on the setting item display to display USER is displayed above the select the item to set preset No display x Touching 44 on the left of the display 3 Press and hold the A button for 1 second switches main items 1 item at a time or longer Touching on the left of the display The mode changes to the title entry mode switches sub items continuously 4 Touch and hold the title display for 2 Touching 44 on the centre of the display switches the sub items 1 item ata time Touching switches sub items continuously 3 When EDIT is displayed at the right of the seconds or longer All characters in the title disappear 5 Touch and hold MEMO for 2 seconds or longer You will hear a long beep and the title is display touch EDIT to switch to the cleared adjustme
26. of 5 locations left centre right top right or bottom right of the display Each touch of the display lights one of the Touch Code indicators zs For example touch 1 centre 2 top right 3 left and 4 bottom right in that order You can also repeatedly touch the same location When you touch 4 times you will hear a long beep and the original mode is returned to 50 DXZ948RMP 7 OPERATIONS OF ACCESSORIES CD Changer Operations CD changer When an optional CD changer is connected through the CeNET cable this unit can control CD changer operations This unit can be connected to a total of 2 CeNET wired CD changers DVD changer When an optional DVD changer is connected through the CeNET cable this unit can control DVD changer operations To view a DVD an optional monitor is required Operation and display of the DVD changer on this unit is a simplified version and does not support all DVD changer functions For operating the DVD changer use the remote control unit that is provided with the DVD changer For details refer to the User s Manual provided with the DVD changer E When 2 CD changers are connected Press the ROTARY knob to select the changer connected to this unit Each press of the ROTARY knob switches the changer e If the CD changer does not contain a magazine NO MAG is displayed and if the magazine does not contain a CD NO DISC is not displayed for that disc No
27. suit your preference 1 Press the SOUND button 2 Touch VSE COFF OFF SOFFS a VSE P EQ Dolby PLI ern SOUND MENU 2 ZONE ADF A MODE 2 OFF OFF AC Processor Ill Operations 3 Touch 4 on the ON OFF display The VSE effect is toggled ON OFF When VSE is set to OFF the VSE setting is not reflected on the music source This completes the VSE setting Press the SOUND button to return to the original mode 4 Touch B U to select BASIC Each touch of B U toggles between BASIC and USER 5 Touch t on the VSE basic menu No to select the desired VSE basic menu VSE basic menus _No Function Name Description FLAT Sound source flat equalizing BASS BOOST 3 HIGH BOOST Mid and treble enhanced 4 IMPACT Low and treble enhanced ACOUSTICAL Mid tones human voice e Si SMOOTH Produces smooth sounding tones 6 Press the SOUND button to return to the original mode Adjusting storing VSE user memory User memory settings allow you to compensate the sound pressure distribution to suit your preference based upon the VSE basic menu Up to six user adjustments can be stored DIFFUSE Adjusts the deviation in diffused sound pressure CAR WIDTH Adjusts the deviation in sound pressure along the width of the car DXZ948RMP 19 AC Processor Ill Operations CAR LENGTH Adjusts the deviation in sound pressure along the length of t
28. the section TV operations cf page 54 or Digital Radio DAB operations cf page 58 TA button e Use the button to set the TA Traffic Announcement standby mode to the DAB mode This function is available only for a DAB tuner e Press and hold for 1 second or longer to turn the INFO mode on or off in the DAB mode gt i button e Switch the TV picture mode or VTR external picture mode in the TV mode e Use the button to set the PTY Programme Type standby mode or PTY items in the DAB mode A button e This button is used for entering the name of the TV station in the TV mode rie Wt ts eo MUTE ror Auto volume indication Dolby PL II indication Mute indication ADF Anti Distortion Filter indication Piel Manual indication rpa ri IA i EA ia zl Stereo indication Hil d DRM Digital Rights Management indication rl TA Traffic Announcement indication re TP Traffic programme indication rif PTY Programme type indication DIS DAB indication lef INFO Information indication 7 DXZ948RMP Display Operations A touch panel display is used as the display on this unit You can operate this display just by touching it with your fingertip There are four main display operations as follows Touch Touch the display with your fingertip and take it away within 1 second This is the most basic operation when operating the display
29. turn the ROTARY knob to select ON or OFF 4 Press the A button to return to the original mode Adjusting the output level of the speakers SP GAIN Use the test tone function built into this unit to adjust so that the volume that is output from all speakers is the same e This item can be set only when the Dolby Pro Logic II mode is set to MUSIC or MATRIX e The factory default setting is OdB 46 DXZ948RMP 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select SP GAIN under SOUND ADJ UST MODE SP GAIN gt EDIT TE SOUND 3 Touch EDIT The mode changes to the SP GAIN adjustment mode 4 Touch 4 4 on the adjustment item display to select the desired item Each touch of switches the adjustment item as follows Adjustment items FRONT IEGAIN front left speaker CTR GAIN centre speaker SUB W GAIN sub woofer FRONT QGAIN front right speaker SRD EGAIN rear left speaker SRDGIGAIN rear right speaker 1 CTR GAIN is displayed only when SP SETTING is set to CTR SW and CENTER SP is set to ON 2 SUB W GAIN is displayed only when SUB WOOFER is set to ON 5 Either touch 4h on the right of the display or turn the ROTARY knob to adjust the output level The output level can be adjusted within the range 10 dB to 10 dB 6 Repe
30. vaarallista lasers teily 2 DXZ948RMP 12V GROUND LW 153 279kHz MW 531 1602kHz FM UKW 87 5 108MHz This unit is designed for on road vehicle purpose Clarion CLASS 1 LASER PRODUCT Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from MSLGP PEL 286L_____ Clarion Co Ltd MADE IN CHINA Bottom View of Main Unit Contents e PRECA Fg 1 EE 3 eler e Reie el 4 Handing Ree TEE 4 SEET 5 3s Le er RE 6 Names of the Buttons and their Functions cccceeceeeeeeeeeeeceeeeeeeeeeceeeeneeeeeeeeeeeeeeeeeeeeeeeeereeeeeeeees 6 Major Button Operations when External Equipment is Connected to this Un 7 DIS DIAY ALC EE 7 Display EE Se E E 8 Bae ER ee 9 5 GENEE 10 Italie EE 10 Functions of Remote Control Unit Buttons ccccseseseeeeeneeeneeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees 11 Bs OPERATIONS couse ales casceccesechnc Sse ac cca a ata erence oeeneuns 12 Basie dee EE E 12 AC PIOGeSsSOr II ele EE 17 elle See ta 23 RDS Ee E 26 CD MPS EE EES ed ee EE 31 Different Pieces of Music Heard by Plural Listeners 2 ZONE function ccccceeeeeeeeeaeeeeees 36 Operations Commonito Each Mode EE 37 T OPERATIONS OF ACCESSORIES trisson dees teeandadecunsteceaciv
31. when TA Traffic Announcement and PTY are turned ON the interrupts are received even if RDS Interrupt is turned OFF 4 Press the A button to return to the previous mode Volume setting of TA emergency broadcast ALARM and PTY The volume for TA ALARM and PTY interrupt broadcasts can be set during TA ALARM or PTY interrupt broadcast e The factory default setting is 15 During a TA ALARM or PTY interrupt broadcast turn the ROTARY knob clockwise or counterclockwise to set the volume to the desired level 0 to 33 e When the TA ALARM or PTY interrupt broadcast ends the volume returns to the level that was active before the interrupt broadcast CD MP3 WMA Operations Screen displays in the CD mode E Main display This is displayed by pressing the ROTARY knob to select the CD mode l DRM indicator Folder display Title display Track playing time display Touching the left of the display for 1 second or longer switches the operation mode SIMPLE MODE e o e MODE Title display Track playing time display Track playing time display 01 02 00 The track No being played and the playing time are displayed If 44 or 45 gt is touched in the standard operation you can select the track to play or fast forward or fast backward tracks Title display The display is switched when this display is touched Folder display in the case of MP3 W
32. within the range 1 to 13 LEVEL can be adjusted within the range 3 to 3 Select either ON or OFF for COMP Press the SOUND button to return to the Original mode Ka Adjusting the Sub woofer and Centre Speaker e SW VOLUME sub woofer can be adjusted 1 only when SUB WOOFER is set to ON CTR VOLUME centre speaker can be adjusted only when the Dolby Pro Logic II mode is set to either MUSIC or MATRIX SP SETTING is set to CTR SW and CENTER SP is set to ON The factory default setting for SW VOLUME is 0 and for CTR VOLUME is 0 Press the SOUND button DXZ948RMP 15 Basic Operations 2 Touch A MODE OFF E Dolby PLII A MODE OFF OFF POSITION P EQ SOUND MENU 2 ZONE ADF OFF 2 OFF 3 Touch 4 on the adjustment item display to select SW VOLUME or CTR VOLUME AUDIO MODE SW VOLUME d 4 Touch 54 on the right of the display and adjust the item as desired This item can be adjusted within the range 5 tO 5 5 Press the SOUND button to return to the original mode Adjusting balance fader BALANCE Adjusts the volume balance between the left and right speakers FADER Adjust the volume balance between the front and rear speakers e The factory default setting for BALANCE is 0 and for FADER is 0 Note e Balance fader ca
33. 9 to adjust the desired item 11 When you have finished adjusting each item touch RIN The display returns to the original screen and gt gt is displayed at the BASIC or USER display Operation so far completes position adjustment To continue to store the adjustment values to the position user menu perform the following 12 Touch and hold RTN for 1 second or longer The position menu list is displayed 13 Touch and hold the user memory you want to store the adjustment values to for 2 seconds or longer You will hear a long beep and the values you adjusted up to step 10 are stored to the position user menu If you hear a short beep the adjustment values up to step 10 are discarded Adjust these values again as required 14 Touch RTN 15 Press the SOUND button to return to the original mode To select a stored user memory touch B U to display USER and touch of 4 on the user memory No Selecting the VSE menu VSE Virtual Space Enhancer allows you to compensate the sound pressure balance inside your car so that the same sound effect can be obtained whichever seat you are sitting in as proved in compensation simulations In the Selecting each mode procedure cf page 44 set AC PROIII to STD e The factory default setting for VSE is OFF and for the VSE basic menu is FLAT E VSE basic menu Six basic menus are pre stored to this function Select the basic menu to
34. 948RMP 27 RDS Operations Auto store function for TP stations You can automatically store up to 6 TP stations to preset memory If the number of TPs that can be received is less than 6 broadcast stations already stored in memory are left without being overwritten 1 Make sure that TA is displayed and touch MODE lf TA is not displayed press the TA button to display TA 2 Touch and hold A STORE for 2 seconds or longer The MODE display changes to A STORE and the preset No in the auto store operation appears on the preset No display e TP stations with good reception sensitivity are stored to preset memory e Even if you select FM1 or FM2 a TP station is stored to memory for FM3 PTY This function enables you to listen to a broadcast of the selected programme type even if this unit is in a function mode other than radio e Some countries do not yet have PTY broadcast e In the TA standby mode a TP station has priority over a PTY broadcast station E To set the PTY standby mode When you press the II button PTY lights in the display and the PTY standby mode is turned on When the selected PTY broadcast starts the PTY item name appears in the display E To cancel the PTY standby mode Press and hold the II button for 1 second or longer PTY goes off in the display and the PTY standby mode is cancelled E To cancel a PTY interrupt broadcast Press the I
35. AMA panorama control setting This widens the soundfield image at the front up to the rear speakers Set this item to YES if you feel that there is no surround effect DIMENSION dimension setting Shifts the soundfield image to the front or the rear When the soundfield image inclines to either the front or the rear this inclination can be compensated Adjustment value 3 is the centre position Adjustment values 2 to 0 shift the soundfield image to the rear while adjustment values 4 to 6 shift the soundfield image to the front CTR WIDTH centre width setting Adjusts the fixed position of the centre channel between the centre speaker and L R front speakers Operations Common to Each Mode When the centre sound is divided equally to the left and right the entire soundfield image increases to produce a naturally expanding feeling Adjustment value 0 plays back all centre sounds on the centre speaker Adjustment value 7 divides the centre sound equally between the L R front speakers 1 CTR WIDTH is displayed only when SP SETTING is set to CTR SW and CENTER SP is set to ON 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select the desired adjustment item under PL Il CONT The adjustment items are PANORAMA DIMENSION and CTR WIDTH DER AD UST MODE mb d PANORAMA NO PLiL CONT 3
36. BAS TREB e Bass treble mode 4 Press the A button to return to the original mode Setting the speaker configuration SP SETTING Set to match the speaker configuration of your car to fully bring out the audio characteristics of this unit e The factory default setting is SWI SW 1 Press the A button to set to the adjust mode 2 Touch 45 on the setting item display to select SP SETTING under SOUND a L Fa ADJ UST MODE 7 SP SETTING gt SWA SWi SOUND 3 Either touch W on the right of the display or turn the ROTARY knob to set the speaker configuration Speaker configuration CTR SW Front rear speakers 4ch 5 1ch Centre speaker 1ch configuration Sub woofer 1ch SWI GW Front rear speakers 4ch 4ch sub woofer Sub woofer 2ch configuration Notes e Sound is not output from the centre speaker unless the following settings are made when CTR SW is set 1 Referring to Selecting the PLII menu Dolby PL II cf page 17 set the Dolby Pro Logic II mode to MUSIC or MATRIX 2 Referring to Setting speakers ON OFF CENTER SP SUB WOOFER cf page 45 set the centre speaker to ON e Sound is not output from the sub woofer Lch when SWI SWli is set and the Dolby Pro Logic II mode is set to MUSIC or MATRIX 4 Press the A button to return to the original mode Setting speakers ON OFF CENTE
37. DCP RELEASE button A CAUTION e Always close the SLOPING CONSOLE before removing the DCP e If you remove the DCP with the SLOPING CONSOLE open the sloping console closes immediately Be careful not to get your fingers caught Attaching the DCP 1 Insert the DCP so that the section on the right side of the DCP catches on the hook on the unit 2 Press the left side of the DCP carefully to fit it in place A CAUTION The DCP can easily be damaged by shocks After removing it be careful not to drop it or subject it to strong shocks If the RELEASE button is pressed and the DCP is not locked into place it may fall out from vibration of the car This can break the DCP so after removing it either install it on the unit or put it in its DCP case The connector connecting the unit and the DCP is an extremely important part Be careful not to damage it by pressing on it with fingernails screwdrivers etc Note e If the DCP is dirty wipe off the dirt with a soft dry cloth only DXZ948RMP 9 5 REMOTE CONTROL Receiver for remote control unit Operationg range 30 in all directions Signal transmitter TOP VOLUME TA lt lt b gt SEARCH MUTE TA DISP Sa N S y clarion WIRELESS REMOTE CONTROLLER Inserting the Batteries the rear cover in the direction of the arrow Batteries 2 Insert the AA SUM 3 R 6 1 5V
38. I button during the PTY interrupt broadcast The PTY interrupt broadcast is cancelled and this unit returns to the PTY standby mode 28 DXZ948RMP Selecting PTY 1 When you press the I button this unit enters the PTY select mode 2 Either touch 4h on the right of the display or turn the ROTARY knob to select PTY Below are the factory default settings stored number me PopM Pop Music 006 Easy M Easy Listening Musie 3 The PTY select mode is cancelled automatically 7 seconds after or touch RTN a PTY is selected PTY seek 1 When you press the BI button the PTY select mode is turned on 2 Either touch W on the centre of the display or turn the ROTARY knob to select PTY 3 Touch 4 on the left of the display When W is touched this unit seeks a PTY broadcast moving up the frequencies while when 4 ts is touched it seeks moving down the frequencies If no station with the selected PTY broadcast can be received this unit returns to the previous mode PTY preset memory 1 When you press the II button the PTY select mode is turned on 2 Touch s4 on the centre of the display to select PTY The 29 PTY types in the table below can be selected RDS Operations ENGLISH DEUTSCH SVENSKA FRANCAIS Contents News Nachich Nyheter Infos Nee affairs Aktuell Aktuelt Magazine Today s events mo L eies Info Services Information Spot Spn Spn Sp
39. ISPLAYS H an error occurs one of the following displays is displayed Take the measures described below to eliminate the problem ERROR 2 A DISC is caught inside the CD deck and is This is a failure of CD deck s mechanism and not ejected consult your store of purchase ERROR 3 A DISC cannot be played due to scratches Replace with a non scratched etc non warped disc ERROR 6 A DISC is loaded upside down inside the Eject the disc then reload it properly CD deck and does not play AMP GUARD The speaker protection circuit is operating 1 Turn down sound volume Function can During this operation if any volume also be restored by turning the power off operation is performed the display shows and on again AMP GUARD Speaker volume is reduced automatically AMP GUARD sometimes functions when when the speaker protection circuit oper special test signals are used ates CD MP3 WMA If the sound is muted again consult our service department ERROR 2 A DISC inside the CD changer is not This is a failure of CD changer s mechanism loaded and consult your store of purchase ERROR 3 A DISC inside the CD changer cannot be Replace with a non scratched non warped played due to scratches etc disc ERROR 6 A DISC inside the CD changer cannot be Eject the disc then reload it properly played because it is loaded upside down ERROR 2 A DISC inside the DVD changer cannot be This is a failure of DVD mechanism and con
40. MA Touching in the standard operation th selects folders MODE Touching this displays sub functions Touching and holding this in the case of MP3 WMA for 1 second or longer displays the folder list Note e This function is enabled only when a disc is playing J SCAN Eg SCAN This is displayed during scan play Touching this ends scan play RPT Bg RPT This is displayed during repeat play Touching this ends repeat play RDM g RDM This is displayed during random play Touching this ends random play TOP Touching this starts play from the track at the top of the disc or folder being played lt q gt only in the simple operation display Touching these buttons selects the track to play Touching and holding these buttons fast forwards or fast backwards tracks E Folder list display in the case of MP3 WMA This is displayed by touching and holding MODE for 1 second or longer in the main display Folder name Inna 003 ROOT 0105 RTN TITLE LIST _ 0610 aan 1 mo 1600 KT eg Folder No Folder No When this is displayed in gray the folder cannot be selected gt Selection in progress Touching a folder name returns the screen to the main display and play starts from the first track in the folder you touched lt PREV RTN Touching this displays the previous folder list Touching and holding this for 1 second or longer returns the screen to the main display gt NEXT
41. NE OFF OFF DEET POSITION P EQ Dolby PLII rs SOUND MENU 2 ZONE ADF A MODE 3 Touch and hold the ON OFF centre of the display for 1 second or longer CONTROL em AA internal External A A When 2 ZONE is set to ON the current 2 ZONE type is displayed The 2 ZONE function is not available when 2 ZONE is set to OFF Press the SOUND button to return to the original mode 4 Touch 4 on the ON OFF display to select the 2 ZONE type 2 ZONE type __ Speaker Io Headphones Internal External Type 1 internal mode external mode External Internal Type 2 external mode internal mode 5 Touch the speaker display or the headphone display to select the 2 ZONE function operation mode If you touch the speaker display you can operate audio on the speakers If you touch the headphone display you can operate audio on the headphones 6 Press the SOUND button to return to the original mode Different Pieces of Music Heard by Plural Listeners 2 ZONE function E To switch the 2 ZONE function ON OFF 1 Press and hold the SOUND button on the unit for 1 second or longer E To switch the 2 ZONE type Press and hold the TA button on the unit for 1 second or longer while the 2 ZONE function is In use E To switch the 2 ZONE function operation mode Press the TA button on the unit while the 2 ZONE function is in use Selecting the mode when the 2 ZONE func
42. Ownere manual Clarion Siemon Bedienungsnleitung Istruzioni per uso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instala o DXZ948 RMP HIGH END RDS EON FM MW LW RADIO CD MP3 WMA COMBINATION WITH TOUCH PANEL RDS EON HAUT DE GAMME COMBINAISON FM MW LW RADIO CD MP3 WMA AVEC ECRAN TACTILE HOCHLEISTUNGS UKW MW LW AUTORADIO KOMBINATION MIT RDS EON FUNKTION UND CD MP3 WMA SPIELER MIT TOUCH PANEL BEDIENFELD HIGH END RDS EON FM MW LW RADIO CD MP3 WMA COMBINAZIONE CON PANNELLO A TOCCO GEAVANCEERDE FM MG LG RADIO MET RDS EON EN CD MP3 WMA SPELER COMBINATIE MET AANRAAKSCHERM AVANZADA COMBINACI N DE RADIO RDS EON FM MW LW Y REPRODUCTOR DE CD MP3 WMA CON PANEL TACTIL H GKVALITATIV KOMBINATIONSANL GGNING MED RDS EON FM MV LV RADIO CD MP3 WMA OCH PEKSK RM R DIO HIGH END RDS EON FM MW LW CD MP3 WMA ASSOCIADO COM PAINEL DE TOQUE x Sg DXZ948RMP MPI wWMA ien R D S EON Dobe OEE Gros Ay Sr DIGITAL AUDIO Windows TEXT EON CONNECTOR A m Media Thank you for purchasing this Clarion product Please read this owner s manual in its entirety before operating this unit After reading this manual be sure to keep it in a handy place e g glove compartment Check the contents of the enclosed warranty card and keep it carefully with this manual This manual includes the operating procedures of the CD changer DAB and TV tuner connected via the CeNET cab
43. P Press the SOUND button Touch POSITION Touch 4 th on the ON OFF display The position effect is toggled ON OFF 4 Touch B U to select BASIC or USER Touch 454 on the right of the display to select the menu that is used as the menu for adjustment Press the A button Touch 4 on the left of the display to select T ALIGN or SP GAIN Touch 4s 4 on the centre of the display to select each adjustment item Each touch of W switches the adjustment items as follows Adjustment items FRONT L SP front left soeaker FRONT R SP front right speaker REAR L SP rear left speaker REAR R SP rear right speaker when SP SETTING is set to CTR SW SUB WOOFER sub woofer when SP SETTING is set to SW W Sw Si SUB W L sub woofer Lch SUB W R sub woofer Rch 2 This is displayed only when SUB WOOFER under SOUND in the adjust mode is set to ON 2 This is displayed only when SUB WOOFER under SOUND in the adjust mode is set to ON and T ALIGN is selected at step 7 Touch 4 on the right of the display and adjust the item as desired POSITION EDIT Pts FRONT L SP 085 1cm T ALIGN T ALIGN can be adjusted within the range 0 cm to 501 4 cm in 2 3 cm steps SP GAIN can be adjusted within the range 20dB to OdB 10 Repeat steps 7 to
44. R SP SUB WOOFER Set the centre speaker CENTER SP and sub woofer SUB WOOFER ON OFF Be sure to set this setting to OFF when there is no centre speaker or sub woofer e The centre speaker CENTER SP can be set when the Dolby Pro Logic II mode is set to MUSIC or MATRIX and SP SETTING is set to CTR SW e The factory default setting is ON 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select CENTER SP under SOUND and SUB WOOFER under SOUND ADS OST MODE CENTER SP ON Operations Common to Each Mode 3 Either touch 4h on the right of the display or turn the ROTARY knob to select ON or OFF 4 Press the A button to return to the original mode Adjusting the filter frequencies of speakers HPF SUB W LPF This function allows you to adjust the filter frequency matched to the speakers you are using e The filters HPF SUB W LPF that you can use differ according to the Dolby Pro Logic Il mode setting mode seting EE SUB WLPF 1 Adjustment is possible only when SUB WOOFER is set to ON e The factory default setting is THROUGH E Filter adjustment HPF high pass filter adjustment This filter cuts bass sound from the front and rear speakers THROUGH A 50Hz gt 80Hz A 120Hz Set the filter matched to the speaker when small diameter speak
45. ROTARY knob to select Message information ON or OFF 4 Press the A button to return to the original MESSAGE fey mode E To switch the screen saver display Touch PREV or NEXT while the screen saver is SS SCAN displayed The above 8 indications are displayed for Each touch of these buttons switches the about 10 seconds each screen saver display Screen savers Entering messages to display SEENEN in message information MSG INPUT 1 type of screen saver is available For details on how to switch the screen saver display see Setting the screen saver e Up to 30 characters can be entered e The factory default setting is Active MatriX Control System 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select MSG INPUT under DISPLAY ADJ UST MODE MSG INPUT EDIT 3 Touch EDIT The mode changes to the message entry mode DXZ948RMP 41 Operations Common to Each Mode 4 Touch 4 on the centre of the display to determine the entry position To clear the message touch and hold the centre of the display for 2 seconds or longer If you perform the operation at step 8 with the message cleared the message returns to its factory default setting 5 Touch 4 on the left of the display to select the type of text Each touch of switches the type of text For details see page 37 6 Either touch 4 on the ri
46. Touch and hold Touch the display with your fingertip and hold it on the display for 1 or 2 seconds or longer Do not move your finger while you are touching the display Touching and holding the display for 1 second or longer displays lists for example and calls up other handy functions Touching and holding the display for 2 seconds or longer is used for storing preset memory or other information S DXZ948RMP Touch 4 WM Touch the display with your fingertip and move your finger to the left e or right gt with your fingertip still touching the display and take your fingertip away within 1 second This operation is used for selecting preset memory 1 to 6 or tracks Touch W gt Touch the display with your fingertip and move your finger to the left e or right gt with your fingertip still touching the display and keep your fingertip on the display The current operation continues for the time your fingertip is held on the display This operation is used for example for manual tuning or fast forwarding fast backwarding tracks 4 DCP The control panel can be detached to prevent theft When detaching the control panel store it in the DCP DETACHABLE CONTROL PANEL case to prevent scratches We recommend taking the DCP with you when leaving the car Removing the DCP 1 With the SLOPING CONSOLE closed turn off the power 2 Press the RELEASE button deeply to open the
47. W discs are both easily affected by high temperature and humidity and some CD R and CD RW discs may not be playable Therefore do not leave them for a long time in the car New discs may have some roughness around the edges If such discs are used the player may not work or the sound may skip Use a ball point pen or the like to v i remove any roughness from the edge of the disc Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks If you try to play such a compact disc Ball point pen 4 DXZ948RMP you may not be able to remove it from the CD player or it may damage the CD player e Do not use compact discs that have large scratches are misshapen cracked etc Use of such discs may cause misoperation or damage e To remove a compact disc from its storage case press down on the centre of the case and lift the disc out holding it carefully by the edges e Do not use commercially available CD protection sheets or discs equipped with stabilizers etc These may damage the disc or break the internal mechanism Storage e Do not expose compact discs to direct sunlight or any heat source e Do not expose compact discs to excess humidity or dust e Do not expose compact discs to direct heat from heaters Cleaning e To remove fingermarks and dust use a soft cloth and wipe
48. adcasting times depend on the DAB station e When the strength of DAB signals is weak audio output is muted Seek tuning 1 Press the ROTARY knob to select the DAB mode 2 Touch W gt on the left of the display DAB lights up in the display when the main unit receives a DAB station The main unit stops the seek tuning when it cannot find a DAB station The display returns to the previous mode Manual tuning 1 Press the ROTARY knob to select the DAB mode 2 If MANU is not displayed touch and hold BAND for 1 second or longer If MANU is displayed manual tuning is possible 3 Touch ton the left of the display to tune the station If no operation is performed for more than 7 seconds manual tuning is cancelled and the display returns to the previous mode 58 DXZ948RMP Switching programmes 1 Press the ROTARY knob to select the DAB mode 2 Touch 4 on the left of the display to switch programmes in the DAB station Note e The programme name may be the same depending on the DAB programme Programme scan This function scans through each receivable programme in a DAB station being received for 10 seconds sequentially This is useful when you want to search for a desired programme 1 Press the ROTARY knob to select the DAB mode 2 Touch MODE 3 Touch S SCAN S SCAN lights up and this unit starts scanning each programme for 10 seconds sequentially Eac
49. aker output level cf page 46 DELAY CENTER SP SRD SP e Adjusting the speaker delay time cf page 65 DOLBY D D RANGE e Adjusting the dynamic range cf page 65 PL II CONT PANORAMA DIMENSION CTR WIDTH e Setting the music mode in detail cf page 47 DXZ948RMP 63 5 1ch Surround Decoder Operations Setting speakers ON OFF CENTER SP SRD SP SUB WOOFER Set the centre speaker CENTER SP surround speaker SRD SP and sub woofer SUB WOOFER ON OFF Be sure to set this setting to OFF when there is no centre speaker surround speaker or sub woofer e The factory default setting is ON 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select CENTER SP under SOUND SRD SP under SOUND and SUB WOOFER under SOUND ADS OST MODE CENTER SP ON 3 Either touch 4 W on the right of the display or turn the ROTARY knob to select ON or OFF In the case of SUB WOOFER select one of ONAT ON or OFF Normally select ON However when ON is set an effect in the low range can be strongly felt 4 Press the A button to return to the original mode Adjusting the filter frequencies of speakers FRONT HPF CENTER HPF SRD HPF SUB W LPF This function allows you to adjust the filter frequency matched to the speakers you are using e A speaker that was turned
50. al are mainly for the standard operation For descriptions for operations in the simple operation refer to the descriptions for the screen displays in the radio mode or the CD mode Basic Operations Switching the display 1 Touch the centre of the display Each time you touch the display it changes as follows Title display PS NAME Screen saver When the screen saver function is set to ON and you do not operate this unit for about 30 seconds the screen saver will be displayed For details see page 41 DXZ948RMP 13 Basic Operations Wallpaper Spectrum analyzer display Touching and holding the center of the display Touching and holding the right of the display for for 1 second or longer switches to the wallpaper 1 second or longer during the spectrum display analyzer S A display switches the spectrum analyzer display S A 1 S A 2 and S A 3 are displayed for 10 seconds or longer Switching the title display You can display disc titles and other information that is stored to discs when playing back CDs in the CD or CD changer modes 1 Touch and hold the right of the display for 1 second or longer in the title display Each time you touch and hold the display switches the display as follows CD TEXT disc User title disc gt CD text title disc gt Artist name gt CD text title track gt User title disc MP3 WMA disc Folder File gt Album TAG gt Artist TAG
51. ards fast backwards tracks DXZ948RMP 51 CD Changer Operations E Disc list display CD changer mode This is displayed by touching and holding MODE for 1 second or longer in the main display Disc name 003 der gt NO TITLE TITLE 006 TITLE LIST TITLEx x 005 Disc No gt Selection in progress Touching a disc name returns the screen to the main display and play starts from the first track in the disc you touched lt PREV RTN Touching this displays the previous title list Touching and holding this for 1 second or longer returns the screen to the main display gt NEXT Touching this displays the next title list A CAUTION CD ROM discs cannot be played from every CD changer This depends on the model Note e Some CDs recorded in the CD R CD RW mode may not be usable Selecting the changer mode 1 Press the ROTARY knob to select the changer mode The mode of equipment that is not connected is not displayed Play starts automatically when the mode changes to the changer mode Pausing play 1 Press the BI button E To resume play 1 Press the II button again 52 DXZ948RMP Selecting a CD 1 Touch 4 on the disc No display to select a disc Play starts If magazine does not contain the disc you selected the No for that disc is not displayed Touching DISC starts play of the next disc E To select a disc from the disc list disp
52. at steps 4 and 5 to adjust each item 7 Press the A button to return to the original mode lt Adjusting the delay time of the rear speaker PL Il DELAY The timing that sound arrives at the listening position differs according to the mounting position of the rear speakers and the size of your car If you adjust the delay time of the rear speakers you can adjust so that sound from the rear speakers can be heard at the same timing as output from the front speakers e This item can be set only when the Dolby Pro Logic II mode is set to MUSIC or MATRIX e The factory default setting is Oms 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select SRD SP under PL Il DELAY ADJ UST MODE SRD SP gt Oms KX WU Ly z PL DELAY 3 Either touch on the right of the display or turn the ROTARY knob to adjust the delay time SRD SP can be adjusted within the range 0 ms to 15 ms 4 Press the A button to return to the original mode Setting the music mode in detail PL II CONT This function allows you to set the music mode in more detail when the Dolby Pro Logic Il mode is set to MUSIC e This item can be set only when the Dolby Pro Logic Il mode is set to MUSIC e The factory default setting for PANORAMA is NO for DIMENSION is 3 and for CTR WIDTH is 3 Adjustment items PANOR
53. auto store is performed again If there are fewer than 6 stations even after auto store is performed twice stations stored so far remain in memory Preset scan Preset scan is a function for receiving stations in the order that they are currently stored to preset Nos so that broadcasts can be checked 1 Touch MODE 2 Touch P SCAN The MODE display changes to P SCAN and the preset No in the preset scan operation is displayed in the preset No display The currently stored stations are received in order for 7 seconds or longer each Stations with poor reception are skipped and the next station is received TV stations are received as follows TV1 1 gt 6 gt TV2 136 gt TV1 19 6 and so forth E To cancel the preset scan 1 Touch P SCAN The P SCAN display changes to MODE and the stations that were being received when P SCAN was touched are received next Watching a video The TV tuner has a VTR input terminal to which 1 external device can be connected Connect a 12 V video cassette player VCP or video cassette recorder VCR to the TV tuner input terminal 1 Press the I button VTR is displayed and the mode is switched to the VTR mode The TV screen enters the video input mode and videos can be viewed E To return to the TV mode 1 Press the gt If button again Setting the TV area TV AREA When you select the TV area TV reception area the TV tuner area setting
54. c range and adjust the desired item MAX maximum dynamic range mode of the Original source STD recommended mode for standard listening MIN the most compressed dynamic range mode that renders even low sounds easy to hear Press the A button to return to the original mode DXZ948RMP 65 8 IN CASE OF DIFFICULTY C reem ees Power does not Fuse is blown Replace with a fuse of the same amperage If the turn on fuse blows again consult your store of purchase No sound is produced Incorrect wiring Incorrect wiring Consult your store of purchase No sound output Power antenna lead is 1 Turn the unit off when operating shorted to ground or 2 Remove all wires attached to the power antenna the unit with excessive current is required lead Check each wire for a possible short to amplifiers or for remote on the amplifiers ground using an ohm meter power antenna or power antenna 3 Turn the unit back on attached 4 Reconnect each amplifier remote wire to the power antenna lead one by one If the amplifiers turn off before all wires are attached use an external relay to provide remote on voltage excessive current required Nothing happens The microprocessor has Turn off the power then Ny Reset button when buttons are malfunctioned due to noise press the RELEASE SX pressed etc button and remove the DCP SX Press the reset button with Display is not a thin rod Se d accurate S DCP or main unit c
55. cancel tuning 1 Touch RIN Preset memory A total of 12 TV stations can be stored 6 TV1 and 6 TV2 This allows you to select your favorite TV stations and store them in memory for later recall 1 Touch BAND to switch the reception band 2 Operate the channel display to select the station to store to 3 Touch and hold MODE for 1 second or longer The preset memory list is displayed 4 Touch and hold the preset No to store for 2 seconds or longer You will hear a long beep and the station is stored in memory If you hear a short beep the station is not stored to memory Repeat the procedure from step 1 56 DXZ948RMP Auto store Auto store selects 6 TV stations automatically and stores each one into preset memory If there are not 6 stations with good reception stations previously stored in memory remain and only the strong stations are stored into memory 1 Touch MODE 2 Touch and hold A STORE for 2 seconds or longer The MODE display changes to A STORE and the preset No in the auto store operation appears on the preset No display Stations with good reception are automatically searched and are stored to preset memory No 1 to No 6 in order from the station having the lowest frequency Notes e When auto store is performed stations stored to memory so far are cleared When there are fewer than 6 stations with good reception low frequencies are automatically returned to and
56. changes e The factory default setting is GERMANY 1 Press the A button to set the adjust mode 2 Touch 4 on the setting item display to select TV AREA under TUNER ADS UST MODE TV AREA gt GERMANY 3 Either touch on the right of the display or turn the ROTARY knob to select the area mode Press the A button to return to the previous TV Operations Setting the TV diver TV DIVER You can change the reception setting for the TV antenna connected to the TV tuner e Set this item to OFF when a TV diversity antenna is not in use e The factory default setting is ON 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display and select TV DIVER under TUNER Leg d AD UST MODE TV DIVER gt ON 3 Either touch 4h on the right of the display or turn the ROTARY knob to select ON or OFF 4 Press the A button to return to the original mode DXZ948RMP 57 Digital Radio DAB Operations DAB control function When a CeNET cable is used to connect a DAB Optional DAH913 or DAH923 all functions can be operated Listening to the DAB station 1 Press the ROTARY knob to change the operation mode Notes e The display shown in the normal reception mode and the preset reception mode is the same as that when a DAB station is received e The number of programmes and bro
57. cted announcement programme starts the main unit automatically switches to the selected announcement programme To set the INFO standby mode If you press and hold the TA button for 1 second or longer INFO lights in the display and the main unit is set to the INFO standby mode until the selected announcement is broadcast When the selected announcement broadcast starts the announcement item appears in the display If you press and hold the TA button for 1 second or longer while the selected announcement broadcast is being received reception of the selected announcement broadcast is cancelled and the main unit enters the INFO standby mode To cancel the INFO standby mode To cancel the INFO standby mode press and hold the TA button for 1 second or longer Information select This is a function for selecting INFORMATION ON or OFF in the Information interrupt mode You can set ON for up to 6 information items You can select any of the 6 items below ENGLISH Travel Warning News News flash Weather Area weather flash Event Special Special event DXZ948RMP 59 Digital Radio DAB Operations 1 Touch MODE 2 Touch INFO SEL to enter the INFO SEL mode 3 Either touch 4 tt on the centre of the display or turn the ROTARY knob to select an information item You can select any of 6 items Travel gt Warning gt News gt Weather gt Event Special Aa Travel 4 To
58. d on the music source This ends the P EQ setting Press the SOUND button to return to the original mode 4 Touch 4th 4 on the REQ menu No to select the PEQ menu PEQ MODE Pa SP SEL FRONT P EQ menus SIGNAL Aa SP SEL a BAND A FREQ gt Q GAIN A SIGNAL 5 Touch 44 on the right on the display and adjust the item as desired SIGNAL selects the adjustment signal Selects P NOIS or MUSIC e P NOIS set when pink noise is to be used e MUSIC set to use music signals SP SEL selects the speakers whose PEQ value is to be adjusted Select one of FRONT CENTER or SURROUND e FRONT front speaker e CENTER centre speaker e SURROUND surround speaker BAND selects the frequency band Select one of band 1 to 3 FREQ selects the centre frequency The adjustment range is from 20 Hz to 20 kHz Q sets the Q curve Sets one of 1 3 5 7 or 20 as the sharpness of the Q curve GAIN adjusts the output level Adjusts the gain output level within the range 12dB to 12dB 1dB steps 25 points 6 Repeat steps 4 and 5 to adjust the desired item 7 Press the SOUND button to return to the original mode E P EQ adjustment The settings that can be adjusted in the PEQ menu are as follows The centre frequency gain and Q curve can be stored to channel band combinations For example centre frequency 250Hz gain 8dB and Q curve 3 can be stored to band 1 on
59. displays the previous or next part of the folder list 2 Touch the folder name W To play the play list Play lists M3U file also can be played Note however that of M3U files currently saved down to five layers including the root in the file hierarchy only the top 5 files having new file timestamps can be played Notes e Up to 255 files can be played in a single play list e Only MP3 or WMA files currently saved to folders down to five layers including the root in the file hierarchy can be played 34 DXZ948RMP Perform the following to play the play list 1 Touch MODE 2 Touch NEXT 3 Touch PLY LIST Reading of the play list starts When reading of the play list ends the play list having the newest timestamp starts automatically The operation of selecting the play list or tracks in the play list is the same as that of selecting a folder or tracks in a folder PLY LIST is not displayed when a correct play list M3U file is not saved on the CD R CD RW loaded on the unit E Stopping play of play list 1 Touch MODE 2 Touch NEXT 3 Touch PLY LIST Fast forward Fast backward 1 To fast forward touch W on the track display 2 To fast forward touch W on the track display Top function The top function resets the CD player to the first track of the disc 1 Touch TOP Play starts from the first track track No 1 In case of MP3 WMA the first track of a folder being played wi
60. ds or longer causes all title text to disappear Entered text display Touch 4 W to select the entered text RTN Touching this cancels entry of titles and returns the display to the original screen Touching and holding this for 1 second or longer displays the text list matched to current text type MEMO Touching and holding this for 2 seconds or longer stores the title that was input and returns the display to the original screen E Text list display This is displayed by touching and holding RTN for 1 second or longer in the main display SS FONT LIST DXZ948RMP 37 Operations Common to Each Mode Type of text The text that is displayed changes according to the text type display When text type display is A AEIMQUX Space When text type display is a a e i m q u When text type is 0 9 or All characters are displayed RTN Touching this returns the display to the main display NEXT Touching this displays the next text list Entering titles You can give TV stations a title up to 10 characters long and to CDs These titles can be displayed when broadcasts are received or when playing CDs The number of titles that can be entered is as follows Mode Number of tities 50 titles 20 titles DCZ628 connected 100 titles CDC655Tz connected 100 titles CDC1255z connected 50 titles CD changer mode Number of titles 1 Either receive the TV s
61. e standard operation display selects a preset memory MODE Touching this displays sub functions Touching and holding this for 1 second or longer displays the preset memory list P SCAN This is displayed during a preset scan Touching this ends the preset scan A STORE This is displayed during an auto store Touching this ends auto store BAND Touching this switches the reception band Touching and holding this for 1 second or longer switches between the manual tuning mode and the seek tuning mode lt q p gt only in the simple operation display Touching these enables seek tuning or step tuning in the manual tuning mode Touching and holding these enables quick tuning in the manual tuning mode E Preset memory list display This is displayed when MODE is touched and held for 1 second or longer in the main display i 87 S5SMHZ 87 9MHZ 98 LMHZzZ 5 ee LO4 1MHz 107 9MHz 108 OMHz sl UUA UUS UU6 Preset No Station name or frequency gt Tuning in progress RTN Touch this to return to the main display Listening to the radio 1 Press the ROTARY knob to select the radio mode Each press of the ROTARY knob switches the mode as follows Radio gt DAB CD MP3 A CD Changer gt DVD Changer TV gt AUX A Radio The mode of equipment that is not connected is not displayed 2 Touch BAND to switch the reception band Each touch of BAND sw
62. eaker CENTER SP SRD SP The timing when the sound of each speaker reaches the listening position depends on your speaker installation and the size of your car Adjust the delay time of each speaker so that the sound of all speakers reaches the listening position at the same time as the sound from the front speakers e The factory default setting is 0 ms 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select CENTER SP under DELAY and SRD SP under DELAY ADJ UST MODE CENTER SP Oms A DELAY 3 Touch 454 on the right of the display to adjust the delay time CENTER SP can be adjusted within the range 0 ms to 5 ms SRD SP can be adjusted within the range 0 ms to 15 ms 4 Press the A button to return to the original mode Adjusting the Dolby Digital functions D RANGE This function compresses the dynamic range of Dolby Digital to maintain low level sounds such as actor conversation and suppress loud sound volumes These functions are only available on Dolby Digital DVD discs e The factory default setting is MAX 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select DOLBY D under D RANGE LE ADS UST MODE i D RANGE gt MAX 5 1ch Surround Decoder Operations 3 Touch on the right of the display to adjust the dynami
63. ear Rear door 3 WAGON 1 Front Front door Rear Luggage side 4 WAGON 2 Front Front door Rear Rear door 5 MINI VAN Front Front door a ae Rear Luggage side MINI VAN 2 Front Front door GE Rear Rear door 6 Press the SOUND button to return to the original mode Adjusting storing EQ user memory With user memory you can compensate the frequency characteristics to suit your car based upon the P EQ basic menu Up to 6 adjustment setups can be stored to user memory For details see P EQ adjustment 1 Press the SOUND button 2 Touch PEQ 3 Touch 4 on the ON OFF display The P EQ effect is toggled ON OFF 4 Touch B U to select BASIC or USER 5 Touch 44 on the right of the display to select the menu that is used as the menu for adjustment 6 Press the A button 7 Touch 4 on the left of the display to select FRONT or REAR 8 Touch 4 on the centre of the display to select each adjustment item Each touch of W switches the adjustment item as follows Adjustment items BAND gt FREQ gt Q gt GAIN gt BAND AC Processor lll Operations 9 Touch 4 on the right of the display and adjust the item as desired BAND can be adjusted within the range 1 to 3 FREQ can be adjusted within the range 20Hz to 20kHz Select one of 1 3 5 7 or 20 as Q GAIN can be adjusted within the range 12dB to 12dB 10 R
64. ect ON or OFF 4 Press the A button to return to the original mode Selecting each mode This item cannot be selected when the Dolby Pro Logic II is set to MUSIC or MATRIX cf page 17 e The factory default setting is PRO for AC PRO III and P EQ for EQ SELECT E AC PROIIl When STD standard mode is selected the sound quality and field can be adjusted by VSE Virtual Soace Enhancer so that the same audio effect can be obtained whichever seat you are sitting in When PRO PRO mode is selected the sound quality and field can be adjusted in detail for each seating position 44 DXZ948RMP E EQ SELECT When P EQ equalizer mode is selected the entire frequency level range can be compensated by a detailed smooth curve When BAS TREB bass treble mode is selected the frequency level can be compensated by dividing it into 2 major levels bass low tones and treble high tones 1 Press the A button to set to the adjust mode 2 Touch s4 on the setting item display to select AC PRO III under SOUND and EQ SELECT under SOUND aia SOUND ADJ UST MODE AC PROIII PRO 3 Either touch 4h on the right of the display or turn the ROTARY knob to select the mode Mode selection AC PRO Ill STD e Standard mode VSE menu PRO e PRO mode position menu EQ SELECT P EQ e Equalizer mode P EQ menu
65. ejected the surface of the disc may become scratched Remove the disc before loading it again Listening to a disc already loaded in the unit 1 Press the ROTARY knob to select the CD mode Play automatically starts when the mode changes to the CD mode DXZ948RMP 33 CD MP3 WMA Operations Pausing play 1 Press the II button E To resume play 1 Press the bl button again Selecting a track When a CD R CD RW recorded with an MP3 file or a WMA file is loaded you can select only tracks recorded to the same folder by touching 4 th on the track display 1 To listen to the next track touch W 4 on the track display 2 To listen to the previous track touch twice on the track display Touching 3 plays the next track If you touch t more times the track advances ahead to the track for the number of times you touched gt and that track is played Touching gt plays the previous track If you touch t more times zthe track moves back to the track for the number of times you touched W and that track is played If you touch twice on the track display while the start of the track is being played the track 2 tracks back is sometimes played E To select a folder To select a different folder either touch th 4 on the folder display or perform the following 1 Touch and hold MODE for 1 second or longer The folder list is displayed Touching PREV or NEXT
66. en displays possible When you use the SLOPING CONSOLE be sure to close it A CAUTION BE CAREFUL NOT TO GET YOUR FINGERS CAUGHT WHEN OPENING AND CLOSING THE SLOPING CONSOLE 1 For safety s sake always close the SLOPING CONSOLE before leaving this unit unused for a prolonged period or switching OFF the ignition key If you switch OFF the ignition key with the SLOPING CONSOLE tilted the SLOPING CONSOLE does not close Handling Compact Discs 2 Before the SLOPING CONSOLE closes there may be a braking sound from the safety mechanism This is normal 3 If you move the SLOPING CONSOLE by hand this may start play To correct this play with the power for the unit ON press the 4 button to close the SLOPING CONSOLE 4 After a disc is ejected the SLOPING CONSOLE automatically returns to the tilted or closed state If there is any obstruction when the SLOPING CONSOLE tries to close the safety mechanism is triggered and the SLOPING CONSOLE returns to the open state If this happens remove the obstruction then press the 4 button 5 To avoid scratching the compact disc keep the 12 or cm CD level when loading or removing it COMPACT Use only compact discs bearing the NIE or MSE DIGITAL AUDI o mark Do not play heart shaped octagonal or other specially shaped compact discs Some CDs recorded in the CD R CD RW mode may not be usable Handling e Compared to ordinary music CDs CD R and CD R
67. epeat steps 7 to 9 to adjust the desired item 11 When you have finished adjusting each item touch RTN The display returns to the original screen and gt gt is displayed at the BASIC or USER display Operation so far completes PEQ adjustment To continue to store the adjustment values to the REQ user menu perform the following 12 Touch and hold RTN for 1 second or longer The PEQ menu list is displayed 13 Touch and hold the user memory you want to store the adjustment values to for 2 seconds or longer You will hear a long beep and the values you adjusted up to step 10 are stored to the P EQ user menu If you hear a short beep the adjustment values up to step 10 are discarded Adjust these values again as required 14 Touch RTN 15 Press the SOUND button to return to the original mode To select a stored user memory touch B U to display USER and touch 4 tt on the user memory No E P EQ adjustment The settings that can be adjusted in the REQ menu are as follows The centre frequency gain and Q curve can be stored to channel band combinations For example centre frequency 250Hz gain 8dB and Q curve 3 can be stored to band 1 on the front FRONT REAR channel selection Selects the channel front or rear to adjust BAND band selection Selects the frequency band 1 to 3 to adjust Set the centre frequency FREQUENCY gain GAIN and Q curve Q for each frequenc
68. ers are used THROUGH Set this when using speakers that can generate bass SUB W LPF sub woofer low pass filter adjustment This filter cuts treble sound from the sub woofer THROUGH A 50Hz gt 80Hz gt 120Hz Set the filter frequency to match the sub woofer THROUGH Set this when a low pass filter built in powered sub woofer is used 1 Press the A button to set to the adjust mode DXZ948RMP 45 Operations Common to Each Mode 2 Touch 4 on the setting item display to select HPF under SOUND and SUB W LPF under SOUND a SOUND ADJ UST MODE HPF THROUGH 3 Either touch 4 gt on the right of the display or turn the ROTARY knob to set the frequency Select one of THROUGH 50Hz 80Hz and 120Hz 4 Press the A button to return to the original mode Setting internal amplifier use ON OFF AMP CANCEL Set internal amplifier use ON OFF matched to whether or not an external amplifier is used Set AMP CANCEL to ON internal amplifier use OFF when an external amplifier is connected and the internal amplifier is not used e The factory default setting is OFF internal amplifier used 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select AMP CANCEL under SOUND a LN d AE UST MODE AMP CANCEL gt OFF SOUND 3 Either touch 4 W on the right of the display or
69. escevasrecttesecctentdes 51 CD Changer OperatlOMmS EE 51 EV DCT en EEN 54 Digital Radio A RTR de EE EE 58 5 1ch Surround Decoder Operations ees EEN 61 8 JINSCASE OF DIFFICULTY scciccsconcscescescetes ee 66 9 ERROR DISPLAYS iann raea aa EAA aa aaa AAAA A Aa A aaa EA sscacedeuteustustisbscscucosseentwend 68 10 SPECIFICATIONS v inan s oiae aaea a enO EErEE Eea Aana iE aoia aai 69 1 PRECAUTIONS 1 This unit is applicable for on road 4 wheel 3 Driving on extremely bumpy roads may vehicle purpose only Use for tractor fork cause severe vibration and cause the sound truck bulldozer off road vehicle 2 or 3 wheel to skip motor bicycle marine boat or other special purpose vehicle is not appropriate When the inside of the car is very cold and INFORMATION FOR USERS the player is used soon after switching on the CHANGES OR MODIFICATIONS TO THIS heater moisture may form on the disc or the PRODUCT NOT APPROVED BY THE optical parts of the player and proper MANUFACTURER WILL VOID THE playback may not be possible If moisture WARRANTY forms on the disc wipe it off with a soft cloth If moisture forms on the optical parts of the player do not use the player for about 1 hour The condensation will disappear naturally allowing normal operation A WARNING For your safety do not watch or operate the touch panel while driving DXZ948RMP 3 Sloping Console This unit uses a SLOPING CONSOLE to make large scre
70. etting is OFF E MUSIC Music mode See Selecting the PLII menu Dolby PLII cf page 17 E MATRIX Matrix mode See Selecting the PLII menu Dolby PLII cf page 17 E MOVIE Movie mode Suitable for DVD video movies E VIRTUAL Virtual mode Suitable for movies and other audio sources E OFF The Dolby Pro Logic II mode is not used 1 Press the SOUND button 2 Touch Dolby PLII OFF DSF A MODE OFF OFF en P EQ Dolby PLII erg SOUND MENU 3 Touch 44 on the right of the display to select the Dolby Pro Logic II mode The mode display is switched as follows MUSIC music mode gt MATRIX matrix mode gt MOVIE movie mode A VIRTUAL virtual mode gt OFF PL II off gt MUSIC music mode For details on the volume adjustment of the centre speaker sub woofer see page 45 4 Touch RIN Selecting the DSF menu DSF Digital Sound Field makes it possible through sound simulation to enjoy the acoustic experience you would have in a concert hall or live performance hall e When the DSF menu is selected the volume sometimes decreases e The factory default setting for DSF is OFF and for the DSF menu is HALL 1 Press the SOUND button 2 Touch DSF OFF OFF OPE en DSF P EQ Dolby PLII ern SOUND MENU A MODE 3 Touch 4 on the ON OFF display The DSF effect is toggled ON OFF W
71. f page 46 SRD SP e Adjusting the rear speaker delay time cf page 46 PANORAMA DIMENSION CTR WIDTH e Setting the music mode in detail cf page 47 TV ARER e Setting the TV area cf page 57 TV DIVER e Setting TV diversity cf page 57 LINK ACT e Setting the AF function between RDS and DAB cf page 26 LANGUAGE e Setting the PTY screen language cf page 30 RDS INT 2Z e Setting the RDS interrupt while the 2 ZONE function is in use cf page 30 AUX TEL e Setting AUX and TEL cf page 47 AUX SENS e Setting the portable audio AUX input level cf page 48 TEL SP e Setting the car speaker output for the cellular phone Optional TEL 002 cf page 48 TEL SWITCH e Cellular phone interrupt setting cf page 48 CALIBRATE A VOL SENS e Setting the auto volume function cf page 49 SYSTEM CHECK e Performing a system check cf page 49 CODEMATIC e Setting security cf page 50 Operations Common to Each Mode Setting the screen saver Spectrum analyzer pattern 2 SCREEN SVR This function allows you display a screen saver when you have not operated this unit for about 30 seconds e The factory default setting is ON 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select SCREEN SVR under DISPLAY ADS OST MODE SCREEN SVR ON e 3 Either touch 4h on the right of the display or turn the
72. ght of the display or turn the ROTARY knob to determine the entered characters 7 Repeat steps 4 to 6 to enter the message 8 Touch and hold MEMO for 2 seconds or longer You will hear a long beep and the message is stored in memory 9 Press the A button to return to the original mode Displaying messages MESSAGE This function allows you to display messages on the display when the power is turned ON OFF Hello is displayed when the power is turned ON and See you is displayed when power is turned OFF e The factory default setting is ON 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select MESSAGE under DISPLAY ADS OST MODE MESSAGE ON DISPLAY 3 Either touch 4 gt on the right of the display or turn the ROTARY knob to select ON or OFF 4 Press the A button to return to the original mode 42 DXZ948RMP Setting the sensitivity of the Spectrum analyzer S A SENS This function allows you to adjust the sensitivity amount of deflection of the Spectrum analyzer For details on displaying the Spectrum analyzer see Switching the display cf page 13 or Setting the screen saver cf page 41 e The factory default setting is MID 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select S A SENS under
73. gt Title TAG gt Folder Notes e MP3 supports ID3 Tags V2 3 2 2 1 1 1 0 e Tag displays give priority to V2 3 2 2 e In the case of album Tags for WMA the information written into the extension header is displayed e Only ASCII characters can be displayed in Tags E To scroll a title Touch W on the title display while the title is displayed The title scrolls to the left 14 DXZ948RMP E To stop scrolling Touch W on the title display CT Clock Time function The CT allows you to receive CT data sent from an RDS station and display the time To display the CT screen touch the centre of the display e If CT data is not being received CT appears in the display Note e CT data is not transmitted in some countries and by some broadcast stations Also in some areas the CT data may not display accurately Setting the ADF e ADF is the abbreviation of Anti Distortion Filter The adopted Liveliness Enhancement Filter and Sound Tone Compensation functions allow well modulated realistic playback without affecting the characteristics of the original sound tone This unit are provided with 4 types of sound tone effects stored in memory Select the one you prefer ADF 1 Suitable for genuine speakers ADF 2 Suitable for separate speakers ADF 3 Suitable for co axial speakers USER This setting can be adjusted by the user to his or her individual preference OFF
74. h B U to display USER and touch on the user memory No 20 DXZ948RMP Selecting the P EQ menu P EQ Parametric Equalizer allows you to compensate the entire frequency level range in detail by smooth curve using frequency compensation matched to the type of your car In the Selecting each mode procedure cf page 44 set EQ SELECT to P EQ e The factory default setting for REQ is OFF and for the PEQ basic menu is SEDAN 1 E P EQ basic menu 6 types of REQ basic menu are pre stored to this function matched to the type of your car and the speaker mounting position Select the basic menu to suit you car 1 Press the SOUND button 2 Touch PEQ 2OFF E Dolby PLII dy A MODE OFF OFF POSITION P EQ SOUND MENU 2 ZONE ADF OFF OFF 3 Touch 4 on the ON OFF display The P EQ effect is toggled ON OFF PEO MODE SEDAN 1 BASIC 2 L 6 BU Aa When the P EQ effect is set to OFF the P EQ setting is not reflected on the music source This ends the P EQ setting Press the SOUND button to return to the original mode 4 Touch B U to select BASIC PEQ MODE SEDAN 1 BASIC 2 L P BU Each touch of B U toggles between BASIC and USER 5 Touch 4 4 on the PEQ basic menu No to select the PEQ basic menu P EQ basic menu we Display name GE mounting Front Front door Rear Rear parcel Front Front door R
75. h time the main unit scans the programme name is shown in the display 4 To stop programme scan when a desired programme is tuned in touch S SCAN Manual memory The main unit has a manual memory function for DAB programmes Up to 18 programmes 6 programmes each can be preset to the preset buttons M1 M2 and M3 1 Press the ROTARY knob to select the DAB mode 2 Touch BAND to select any one shown above 3 Touch and hold MODE for 1 second or longer The preset memory list is displayed 4 Touch and hold the preset No to be stored for 2 seconds or longer You will hear a long beep and the station is stored to memory If you hear a short beep the station is not stored to memory Repeat the procedure from step 1 Note e Interrupt programmes PTY or INFO cannot be written to manual memory Recalling a preset programme 1 Press the ROTARY knob to select the DAB mode 2 Touch BAND Each touch of BAND changes the display in the following order MEMO1 gt MEMO2 gt MEMO3 A MEMO1 3 Touch 4 on the right of the display to recall a preset programme AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception The factory default setting is ON If the reception of the current broadcast station deteriorates SEARCH appears in the display and the radio searches for the same programme on another frequency e
76. he A button to set the adjust mode 2 Touch 4 on the setting item display to select LANGUAGE under TUNER e dei ADJ UST MODE ay LANGUAGE ENGLISH TUNER 3 Either touch 4h on the right of the display or turn the ROTARY knob to select the language Select one of ENGLISH DEUTSCH German SVENSKA Swedish or FRAN AIS French 4 Press the A button to return to the previous mode Setting RDS interrupt when the 2 ZONE function is used RDS INT 22 When this function is set to ON and there is an RDS interrupt while the 2 ZONE function is in use RDS information can be received e When there is an RDS interrupt the 2 ZONE function turns OFF e If there was an alarm interrupt even with RDS INT 22 set to OFF the RDS information is received e The factory default setting is ON 1 Press the A button to set the adjust mode 2 Touch 4 on the setting item display to select RDS INT 2Z under TUNER e Zei ADS OST MODE way RDS INT 2Z ON TUNER 30 DXZ948RMP 3 Either touch 4 W on the right of the display or turn the ROTARY knob to select either ON or OFF ON RDS information is received when there is an RDS interrupt while the 2 ZONE function is in use OFF When the 2 ZONE function is in use RDS information other than the alarm interrupt is not received Note e If Radio mode is selected
77. he car Press the SOUND button 2 Touch VSE 3 Touch on the ON OFF display The VSE effect is toggled ON OFF 4 Touch B U to select BASIC or USER 5 Touch ton the right of the display to select the menu that is used as the menu for adjustment 6 Press the A button 7 Touch 454 on the adjustment item display to select DIFFUSE CAR WIDTH or CAR LENGTH VSE EDIT DIFFUSE 5 it 8 Touch h on the right of the display and adjust the item as desired This item can be adjusted within the range 1 to 10 9 Repeat steps 7 and 8 to adjust the desired item 10 When you have finished adjusting each item touch RTN The display returns to the original screen and gt gt is displayed at the BASIC or USER display Operation so far completes VSE adjustment To continue to store the adjustment values to the VSE user menu perform the following 11 Touch and hold RTN for 1 second or longer The VSE user menu list is displayed 12 Touch and hold the user memory you want to store the adjustment values to for 2 seconds or longer You will hear a long beep and the values you adjusted up to step 9 are stored to the VSE user menu If you hear a short beep the adjustment values up to step 9 are discarded Adjust these values again as required 13 Touch RTN 14 Press the SOUND button to return to the original mode To select a stored user memory touc
78. he operation mode changes in the following order Radio mode gt DAB mode A CD MP3 mode gt CD changer mode gt DVD changer mode gt TV mode gt AUX mode gt Radio mode External equipment not connected with CeNET is not displayed Adjusting the volume 1 Turning the ROTARY knob clockwise increases the volume turning it counterclockwise decreases the volume The volume level is from 0 minimum to 33 maximum Switching the operation mode There are 2 basic operation modes standard operation and simple operation 1 Inthe main display screen touch and hold the left of the display for 1 second or longer The operation mode is switched SIMPLE MODE 25 In the simple operation the operations of touching 4h or gt in the radio mode or CD mode main display screen are not required and this unit can be used by performing simple operation Note however that the following operations are not available in the simple operation e Preset tuning folder selection disc selection and other operations that involve touching amp amp on the right of the display Display switching operations cf page 13 Title display switching operations cf page 14 Operations for displaying title entry screens In screens e g list display adjust mode etc other than the main display there is no difference between the standard operation and the simple operation Descriptions given in this manu
79. hen DSF is set to OFF the DSF setting is not reflected on the music source This completes the DSF setting Press the SOUND button to return to the original mode DXZ948RMP 61 5 1ch Surround Decoder Operations 4 Touch 4 on the DSF menu No to select the desired DSF menu DSF MODE CHURCH BASIC 1 DSF menus HALL CHURCH A STADIUM A LIVE A JAZZCLUB gt THEATER HALL Function Discription Name 1 HALL Large concert hall CHURCH Church with a vaulted ceiling STADIUM Large stadium without roof or walls LIVE Live performance hall larger than a jazz club JAZZCLUB Jazz club with a low TTT ER THEATER Movie or drama theater 5 Press the SOUND button to return to the original mode Selecting the Parametric Equalizer menu Parametric Equalizer P EQ allows you to compensate the entire frequency level range in detail by smooth curve using frequency compensation matched to the type of your car e The factory default setting provides the following settings for all speakers FREQ 1kHz Q 1 GAIN 0dB 1 Press the SOUND button 2 Touch PEQ OFF OFF OFF ECH DSF P EQ Dolby PLII ern SOUND MENU A MODE 3 Touch 4 on the ON OFF display The P EQ effect is toggled ON OFF PEQ MODE pA SIGNAL _ P NOIS OFF When the P EQ effect is set to OFF the 62 DXZ948RMP P EQ setting is not reflecte
80. ibility 32 DXZ948RMP Precautions when creating an MP3 WMA disc Usable sampling rates and bit rates 1 MP3 Sampling rate 11 025 kHz to 48 kHz Bit rate 8 kbps to 320 kbps VBR 2 WMA Bit rate 48 kbps to 192 kbps File extensions 1 Always add a file extension MP3 or WMA to an MP3 or WMA file by using single byte letters If you add a file extension other than specified or forget to add the file extension the file cannot be played 2 Files without MP3 WMA data will not play The indication appears in the playing time display if you attempt to play files without MP3 WMA data Logical format File system 1 When writing an MP3 WMA file on a CD R disc or CD RW disc please select ISO9660 level 1 2 or JOLIET or Romeo as the writing software format Normal play may not be possible if the disc is recorded on another format 2 The folder name and file name can be displayed as the title in the case of MP3 WMA play but the title must be within 128 single byte alphabetical letters and numerals including an extension 3 Do not give a name to a file inside a folder having the same name Folder structure 1 A disc with a folder having more than 8 hierarchical levels is not allowed Number of files or folders 1 Up to 255 files can be recognized per folder Up to 500 files can be played 2 Tracks are played in the order that they were recorded onto a disc Tracks migh
81. is displayed 2 Touch the disc name If magazine does not contain the disc you selected NO DISC is displayed for that disc No If you selected the same disc as that currently being played play returns to and starts from the first track on that disc Scan play Scan play locates and plays the first 10 seconds of each track on a disc automatically This function continues on the disc until it is canceled The scan play function is useful when you want to select a desired track 1 Touch MODE 2 Touch T SCAN The MODE display changes to T SCAN and scan play starts Scan play starts from the next track after the track currently being played E To cancel scan play 1 Touch T SCAN The T SCAN display changes to MODE and the track that was playing when you touched I SCAN is played Disc scan play Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD changer This function continues automatically until it is canceled Disc scan play is useful when you want to select a desired CD 1 Touch MODE 2 Touch D SCAN The MODE display changes to D SCAN and disc scan play starts Disc scan play starts from the next disc after the disc currently being played WE To cancel disc scan play 1 Touch D SCAN The D SCAN display changes to MODE and the track that was playing when you touched D SCAN is played Repeat play
82. isteners to enjoy separate music sources This unit can control its internal sources radio CD MP3 etc to play them back and further can simultaneously play back sources from external equipment connected via CeNET for instance CD changers etc The sources of the MAIN zone are played back from the speakers inside your car and those of the SUB zone are from the headphone systems WH143 Type 1 leen CONTROL ON RTN L n Internal Gem V AT mm A Exter External Type 2 gt Internal snsemat The upper figure is for when a sound source is being played by the unit s internal mode radio CD AUX on the speakers The lower figure is for when a sound source is being played by the unit s external mode CD changer DVD changer TV AUX on the speakers e The factory default setting is OFF Notes e The ISR function is not available while the 2 ZONE function is in use e The new volume adjustment made by turning the ROTARY knob on this unit is reflected only on the speakers The AUX SENS setting is reflected on both the speakers and the headphones 36 DXZ948RMP E Screen display when the 2 ZONE function is in use INT internal mode or EXT external mode is displayed in the centre of the display to indicate whether you can hear play in the internal mode or external mode in the current 2 ZONE function operation mode 1 Press the SOUND button 2 Touch 2 ZO
83. itches the reception band as follows FM1 A FM2 gt FM3 A AM MW LW A EMT DXZ948RMP 23 Radio Operations Tuning There are 3 types of tuning mode available seek tuning manual tuning and preset tuning Seek tuning There are 2 types of seek tuning DX SEEK and LOCAL SEEK DX SEEK can automatically tune in to receivable broadcast stations while LOCAL SEEK can tune in to only broadcast stations with good reception sensitivity 1 Touch BAND to select the desired band FM or AM MW LW 2 Tune into a station o When MANU is displayed touch and hold BAND for 1 second or longer MANU in the display goes off and seek tuning is now available If TA is lit in the display TP stations are automatically sought DX SEEK When W is touched in the frequency display automatic tuning starts When W is touched the station is sought in the direction of higher frequencies when is touched the station is sought in the direction of lower frequencies o When seek tuning starts DX SEEK appears in the display LOCAL SEEK When gt is touched in the frequency display local seek tuning is carried out Broadcast stations with good reception sensitivity are selected When local seek starts LO SEEK appears in the display 24 DXZ948RMP Manual tuning There are 2 ways available quick tuning and step tuning In the step tuning mode the frequency changes 1 step
84. lay 1 Touch and hold MODE for 1 second or longer The disc list is displayed If you touch NEXT the next part of the disc list is displayed 2 Touch the disc name If magazine does not contain the disc you selected NO DISC is displayed for that disc No If you selected the same disc as that currently being played play returns to and starts from the first track on that disc top function Selecting a track 1 To listen to the next track touch 4 on the track display 2 To listen to the previous track touch twice on the track display Touching ts plays the next track If you touch it more times the track advances ahead to the track for the number of times you touched th and that track is played Touching W plays the previous track If you touch 4h more times the track moves back to the track for the number of times you touched and that track is played If you touch twice on the track display while the start of the track is being played the track 2 tracks back is sometimes played Fast forward Fast backward 1 To fast forward touch gt on the track display 2 To fast forward touch W on the track display CD Changer Operations Top function The top function starts play from the first track on the disc currently being played 1 Touch and hold MODE for 1 second or longer The disc list is displayed If you touch NEXT the next part of the disc list
85. lding this for 1 second or longer displays the preset memory list P SCAN This is displayed during a preset scan Touching this ends the preset scan A STORE This is displayed during an auto store Touching this ends the auto store BAND Touching this switches the reception band Touching and holding this for 1 second or longer toggles between the manual tuning mode and the seek tuning mode lt q gt only in the simple operation display Touching these buttons enables seek tuning or step tuning in the manual tuning mode Touch and holding these buttons enables quick tuning in manual tuning mode E Preset memory list display This is displayed by touching and holding MODE for 1 second or longer in the main display Station name Preset No gt gt Tuning in progress RTN Touching this returns the display to the main display Selecting the TV mode 1 Press the ROTARY knob to select the TV mode Each press of the ROTARY knob switches the mode as follows The mode of equipment that is not connected is not displayed TV Operations Switching the reception band 1 Touch BAND to switch the reception band Each touch of BAND switches the reception band TV1 gt TV2 gt TV1 Seek tuning Seek tuning is a function for automatically tuning stations with good reception 1 Touch and hold BAND for 1 second or longer while MANU is displayed Automatic tuning is possible when MANU disappea
86. le The CD changer and TV tuner have their own manuals but no explanations for operating them are described CAUTIONS This appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT To use this model properly read this Owner s Manual carefully and keep this manual for your future reference In case of any trouble with this player please contact your nearest AUTHORIZED service station To prevent direct exposure to the laser beam do not try to open the enclosure ICAUTIONS USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE ADVARSEL Denne meerking er anbragt udvendigt pa apparatet og indikerer at apparatet arbejder med laserstraler af klasse 1 hvilket betyder at der anvendes laserstraler af svageste klasse og at man ikke pa apparatets yderside kan blive udsat for utilladelig kraftig straling APPARATET BOR KUN ABNES AF FAGFOLK MED SAERLIGT KENDSKAB TIL APPARATER MED LASERSTRALER Indvendigt i apparatet er anbragt den her gengivne advarselsmeekning som advarer imod at foretage sadanne indgreb i apparatet at man kan komme til at udsazette sig for laserstraling Apparaten innehaller laserkomponenten som avger laserstralning verstigande gr nsen for laserklass 1 VAROITUS Suojakoteloa si saa avata Laite sis lt laserdiodin joka l hett n kym t nt silmille
87. ll be returned Scan play This function allows you to locate and play the first 10 seconds of all the tracks recorded ona disc 1 Touch MODE 2 Touch SCAN The MODE display changes to SCAN and scan play starts Scan play starts from the next track after the track currently being played WE To cancel scan play 1 Touch SCAN The SCAN display changes to MODE and the track that was playing when you touched SCAN is played Folder scan play This function allows you to locate and play the first 10 seconds of the first track of all the folders on an MP3 WMA disc 1 Touch MODE 2 Touch fg SCAN The MODE display changes to fg SCAN and folder scan play starts Folder scan play starts from the folder following the folder that is playing E To cancel folder scan play 1 Touch fm SCAN The SCAN display changes to MODE and the track that was playing when you touched fg SCAN is played Repeat play This function allows you to play the current track repeatedly 1 Touch MODE 2 Touch REPEAT The MODE display changes to RPT and repeat play is started E To cancel repeat play 1 Touch RPT The RPT display changes to MODE and regular play starts from the track that was playing when you touched RPT CD MP3 WMA Operations Folder repeat play This function allows you to repeatedly play the folder currently being played This
88. lly in no particular order This function continues automatically until it is canceled 1 Touch MODE 2 Touch D RANDOM The MODE display changes to D RDM and random play starts E To cancel disc random play 1 Touch D RDM The D RDM display changes to MODE and regular play starts from the track that was playing when you touched D RDM 54 DXZ948RMP TV Operations TV tuner function When an optional TV tuner is connected through the CeNET cable this unit controls all TV tuner functions To watch TV you need a TV tuner and a monitor Screen displays in the TV mode E Main display This is displayed by pressing the ROTARY knob to select the TV mode Preset No Display Reception band display MANU Indicators Title display Channel display Touching the left of the display for 1 second or longer switches the simple operation mode SIMPLE MODE MODE Title display Preset No Display Channel display 1ch The channel currently being received is displayed Touching 4 tt or gt in the normal mode allows you to perform seek tuning or manual tuning Title display 3ch The name of the station currently being received is displayed VTR In video mode Touching these switches the display Reception band display TV1 Band name Preset No display Touching 4 t 4 in the normal mode selects a preset memory MODE Touching this displays sub functions Touching and ho
89. n Sports Educate Biidung Utbiidn Educatf Education Drama Horst Teater Fiction Drama Science Wissen Vetenskp Sciences Science Pop Easy M Lattiyss Popm m Mo PRockM po Rok MRook Rock music Easym Oerm Weather Wetter V der M t o Weather Finance Winsch Ekonomi Economie Finance Cider Social Soziales Sociat Soci t Socia Phonem ing Teen Forum Phonein Children For children Nation Landes M Nationm Chpays Nation muso Oides Odes Odes 1 R amp o Odes Fan Folklore Fokm Folklore Folk musio Document Feature Dokument Document Documentaries _ Light M M CI L g Light music 3 Touch RTN for 1 second or longer Emergency broadcast TEP EE UNE SUIS displayed If an emergency broadcast is received all 4 Touch and hold the preset No to be stored function mode operations are stopped for 2 seconds or longer ALARM appears in the display and the You will hear a long beep and the selected emergency broadcast can be heard PTY is stored to that preset channel memory E To cancel an emergency broadcast If you press the AF button emergency broadcast reception is cancelled DXZ948RMP 29 RDS Operations Switching the PTY display language You can select one of 4 languages English German Swedish or French for the PTY displayed in the display e The factory default setting is ENGLISH 1 Press t
90. nnot be adjusted when PRO is selected at AC PRO III cf page 44 and the position function is set to ON Adjust balance fader by the Selecting the position menu cf page 17 1 Press the SOUND button 2 Touch A MODE OFF OFF OFF POSITION P EQ Dolby PLII SOUND MEN U 2 ZONE ADF A MODE OFF 2OFF 3 Touch 44 on the adjustment item display to select BALANCE or FADER AUDIO MODE BALANCE d 16 DXZ948RMP 4 Touch 4 4 on the right of the display adjust the item as desired BALANCE can be adjusted within the range L13 left side emphasized and R13 right side emphasized FADER can be adjusted within the range R12 rear side emphasized and F12 front side emphasized 5 Press the SOUND button to return to the original mode Adjusting bass treble The bass treble mode can be adjusted only when the Dolby Pro Logic II mode is set to OFF cf page 17 and EQ SELECT is set to BAS TREB cf page 44 e The factory default setting is 0 Press the SOUND button 2 Touch A MODE OFF E Dolby PLII A MODE OFF POSITION SOUND MENU 2 ZONE ADF OFF OFF 3 Touch on the adjustment item display to select BASS or TREBLE AUDIO MODE BASS d 4 Touch 44 on the right of the display and adjust the item as desired This item can be
91. nt details display S a 7 ADJ UST MODE Changing settings ST MSG INPUT EDIT E i DISPLAY Selecting setting items 1 Press the A button 4 Either touch 4 on the right of the display or turn the ROTARY knob to set the details E To return to the original mode 1 Press the A button again enen items Leed See OO O SVR e Screen saver setting cf page 41 MSG INPUT e Message information input cf page 41 MESSAGE e Message display setting at power ON OFF cf page 42 S A SENS e Setting the Spectrum analyzer sensitivity cf page 42 SCROLL e Adjusting the scroll speed cf page 42 APPERNCE DIMMER IN e Auto dimmer setting cf page 43 DMR LEVEL e Setting the dimmer level cf page 43 CONTRAST e Adjusting the display contrast cf page 43 BLINK LED e Making the LED blink when DCP is removed cf page 43 BEEP e Setting beep cf page 44 DXZ948RMP 39 Operations Common to Each Mode 40 PL Il DELAY PL Il CONT TUNER SETTING DXZ948RMP be Oc seems o PRO lll e Selecting the VSE mode STD PRO cf page 44 EQ SELECT e Selecting the equalizer mode cf page 44 SP SETTING e Setting the speaker configuration cf page 44 CENTER SP SUB WOOFER e Setting sub woofer speaker ON OFF cf page 45 HPF SUB W LPF e Adjusting the speaker filter frequency cf page 45 AMP CANCEL e Setting internal amplifier use ON OFF cf page 46 SP GAIN e Adjusting the speaker output level c
92. ode so you can listen to it Traffic programme TP automatic tuning is also possible This function can only be used when TP is lit in the display When TP is lit this means that the RDS broadcast station being received has traffic announcement programmes E To set the TA standby mode If you press the TA button when only TP is lit in the display TP and TA light in the display and this unit is set to the TA standby mode until a traffic announcement is broadcast When a traffic announcement broadcast starts TRA INFO appears in the display If you press the TA button while a traffic announcement broadcast is being received the traffic announcement broadcast reception is cancelled and this unit enters the TA standby mode E To cancel the TA standby mode With TP and TA lit in the display press the TA button TA in the display goes off and the TA standby mode is cancelled e If TP is not lit pressing the TA button searches for a TP station WE To search for a TP station If you press the TA button when TP is not lit TA in the display lights and this unit automatically receives a TP station Note e When a TP station cannot be received TP SEEK is displayed and the search for the TP station is continued When the TA button is pressed again TA and TP SEEK in the display go off and the search for the TP station ends DXZ
93. off in the section Setting speakers on or off CENTER SP SRD SP SUB WOOFER is not displayed The factory default setting for FRONT HPF or SRD HPF is THROUGH no filter and for CENTER HPF or SUB W LPF is 120Hz 64 DXZ948RMP E Filter adjustment FRONT HPF CENTER HPF SRD HPF high pass filter adjustment This filter cuts bass sound from the front centre and surround speakers THROUGH A 50Hz 80Hz 120Hz Set the filter matched to the speaker when small diameter speakers are used THROUGH Set this when using speakers that can generate bass THROUGH cannot be set at CENTER HPF SUB W LPF sub woofer low pass filter adjustment This filter cuts treble sound from the sub woofer 50Hz A 80Hz A 120Hz Set the filter frequency to match the sub woofer 1 Press the A button to set to the adjust mode 2 Touch 454 on the setting item display to select FRONT HPF under SOUND CENTER HPF under SOUND SRD HPF under SOUND and SUB W LPF under SOUND a W SOUND ADJ UST MODE FRONT HPF THROUGH 3 Either touch W on the right of the display or turn the ROTARY knob to set the frequency Select one of THROUGH 50Hz 80Hz and 120Hz I THROUGH is displayed only when FRONT HPF or SRD HPF is selected Press the A button to return to the original mode Adjusting the delay time of the sp
94. on When the REG function is ON the optimum regional station can be received When this function is OFF the optimum station for that region is received if the regional station area switches as you drive e The factory default setting is OFF Notes e This function is disabled when a national station such as BBC R2 is being received e The REG function ON OFF setting is valid when the AF function is ON E To switch the REG function ON OFF 1 Touch MODE 2 Touch REG Each touch toggles the display on REG between ON and OFF 3 Touch RIN Manually tuning a regional station in the same network e This function is valid when the AF function is ON The operation differs according to the ON OFF setting of the REG function When the REG function is ON broadcasts having a perfectly matching PI code can be received When the REG function is OFF broadcasts of the same type of PI code can be received Notes e This function can be used when a regional broadcast of the same network is received e The PI code is a coding system that is unique to each broadcast station 1 Touch and hold MODE for 1 second or longer The preset memory list is displayed 2 Touch the preset No of the broadcast to be received TA Traffic Announcement When a traffic announcement broadcast starts in the TA standby mode the traffic announcement broadcast is received as top priority regardless of the function m
95. onnectors Wipe the dirt off with a soft cloth moistened with are dirty cleaning alcohol No sound heard There is a disc other thana With the slooping console open press and hold the compact disc or foreign 4 button for 3 seconds or longer matter already in place The foreign matter is forcibly ejected MP3 WMA files are absent in Write MP3 WMA files onto the disc properly a disc Files are not recognized as Use MP3 WMA files encoded properly an MP3 WMA file File system is not correct Use ISO9660 level 1 2 or JOLIET or Romeo file system Sound skips or is Disc is dirty Clean the disc with a soft cloth noisy Disc is heavily scratched or Replace with a disc with no scratches warped Sound is cut or MP3 WMA files are not Use MP3 WMA files encoded properly skipped encoded properly Noise is generated or noise is mixed with sound CD MP3 WMA 66 DXZ948RMP Tess ee Sound is bad Water droplets may form on Let dry for about 1 hour with the power on directly after the internal lens when the power is turned car is parked in a humid on place Wrong filename File system is not correct Use ISO9660 level 1 2 or JOLIET or Romeo file system Play list play is File name or extension is not Use alphanumeric ASCII characters for MP3 WMA not performed correct file name Use M3U for the file extension of a play list lt e D m O DXZ948RMP 67 9 ERROR D
96. or longer REG function on and off PTY mode on and off Scan play Press and hold the button for 1 second or longer to perform folder scan play while in the MP3 WMA disc Repeat play Press and hold the button for 1 second or longer to perform folder repeat play while in the MP3 WMA disc Random play Press and hold the button for 1 second or longer to perform folder random play while in the MP3 WMA disc Switches among main display clock CT display Scan play When pressed and held for 1 second or longer Disc scan play Repeat play When pressed and held for 1 second or longer Disc repeat play Random play When pressed and held for 1 second or longer Disc random play Preset scan When pressed and held for 2 seconds or longer Auto store No function Switches between TV and VTR 2 ZONE Press and hold for 1 second or longer to turn on or off the 2 ZONE mode Press to switch the control zone between main zone or sub zone while 2 ZONE mode on Some of the corresponding buttons on the main unit and remote control unit have different functions DXZ948RMP 11 6 OPERATIONS Basic Operations A CAUTION Be sure to lower the volume before switching the unit off or the ignition key The unit remembers its last volume setting If you switch the power OFF with the volume up when you switch the power back ON the sudden loud volume may hurt your hearing
97. receives the RDS signal and can read PS data PS appears in the display 26 DXZ948RMP AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception e The factory default setting is ON E To switch the AF function ON OFF 1 Touch MODE 2 Touch AF Each touch toggles the display on AF between ON and OFF 3 Touch RIN If the reception of the current broadcast station deteriorates SEARCH appears in the display and the radio searches for the same programme on another frequency E AF function between RDS and DAB When the same programme is broadcasted by both RDS and DAB and this function is ON this unit automatically switches to receive the broadcast with the better reception e This function only operates when the DAH923 or DAH913 DAB unit Optional is connected e This factory default setting is ON Press the A button to set the adjust mode 2 Touch 454 on the setting item display to select LINK ACT under TUNER e Zei ADS OST MODE Mag LINK ACT gt ON TUNER 3 Either touch 4h on the right of the display or turn the ROTARY knob to select either ON or OFF ON AF switching between DAB and RDS is enabled OFF AF switching between DAB and RDS is disabled 4 Press the A button to return to the previous mode RDS Operations REG Regional programme functi
98. rs 2 Touch on the channel display SEEK UP SEEK DOWN is displayed and tuning starts Tuning automatically stops at stations with good reception E To cancel tuning 1 Touch W gt on the channel display again Manual tuning There are 2 ways available quick tuning and step tuning When you are in the step tuning mode the frequency changes 1 step at a time In the quick tuning mode you can quickly tune the desired frequency 1 Touch and hold BAND for 1 second or longer while MANU is not displayed Manual tuning is possible when MANU is displayed 2 Operate the channel display to tune to a channel on which there is a broadcast There are 2 manual tuning methods step tuning and quick tuning Step tuning is a function for switching the channel 1 step at a time Touch W on the frequency display Quick tuning is a function for switching the channel continuously Touch W gt at the channel display Tuning stops when you take your finger away from the panel DXZ948RMP 55 TV Operations Recalling a preset station Preset scan allows the user to view each preset position before it automatically advances to the next preset This function is useful for searching for a desired TV station in memory 1 Touch and hold MODE for 1 second or longer The preset memory list is displayed 2 Touch the station you want to listen to The station can also be tuned by touching 4 Kh at a preset No E To
99. settings in the adjust mode e Use this button to enter station names in the radio mode or disc titles in the CD mode SOUND button e Use this button for setting or adjusting various settings such as audio space e Holding this button down for 1 second or longer also toggles the 2 ZONE function ON and OFF 6 DXZ948RMP TA button e Use the button to set the TA Traffic Announcement standby mode when the 2 ZONE function is OFF Switches the operation of the 2 ZONE function Holding this button down for 1 second or longer switches the 2 ZONE type when the 2 ZONE function is ON gt I button e Pauses and unpauses a track in the CD mode e Use the button to set the PTY Programme Type standby mode or PTY items Display e Displays the various information that indicates the operating state of this unit such as tuning play state and indicators e Touch the display with your finger and touch 4 th to enable operation cf page 8 Major Button Operations wh Connected to this Unit When the CD DVD changer is connected For details see the section CD changer operations cf page 51 For the DVD changer refer to the Owner s Manual provided with the DVD changer gt I button e Play or pause a CD or DVD A button e Used for entering disc titles in the CD changer mode Display ltems en External Equipment is When the TV DAB is connected For details see
100. t not always be played in the order displayed on the PC 3 Some noise may occur depending on the type of encoder software used while recording Multi session selection This function allows you to select either CD DA or MP3 WMA files in the case of discs e g CD EXTRA containing a mixture of CD DA music CD and MP3 WMA files 1 Touch MODE 2 Touch M SESS Each touch of M SESS toggles the M SESS display between CD play CD DA or MP3 WMA play MP3 WMA If M SESS is not displayed touch NEXT 3 Touch RIN The multi session selection setting is reflected the next time you load a CD Note When playing a CCCD Copy Control CD set the setting to CD type When this is set to MP3 WMA type the cannot be playing normally in some cases A CAUTION Be careful not to catch your hand or fingers while closing the SLOPING CONSOLE Notes e If the SLOPING CONSOLE does not open fully gently open with your hand e After loading a CD always close the SLOPING CONSOLE e Do not try to put your hand or fingers in the CD SLOT Also never insert foreign objects into the slot e Do not load discs where adhesive comes out from cellophane tape or a rental CD label or discs with marks where cellophane tape or rental CD labels were removed It may be impossible to eject these discs from the unit and they may cause the unit to break down Loading a CD 1 Press the 4 button The control panel opens
101. tation or play a CD for which you want to enter the title 2 Touch the centre of the display to set to the user title display When the display changes to the user title display USER is displayed above the preset No display 3 Press and hold the A button for 1 second or longer The mode changes to the title entry mode 4 Touch 4 on the title display to determine the entry position The position of the blinking text moves to the left or the right TITLE INPUT Up to ten characters can be input 38 DXZ948RMP A CAUTION Pressing the reset button clears all user memories such as titles stored on this unit 5 Touch 4 on the text type display to select the type of text Each touch of switches the type of text as follows Capital alphabet letters space ABCDEFGHIJKLMNOPQ RSTUVWXYZ Small alphabet letters abcdefghijklmnopgqrstuvwxyz Numbers 0123456789 Symbols Umlaut AAEEEEIZA Gaad ec ibliag Either touch KR on the right of the display or turn the ROTARY knob to determine the entered characters Repeat steps 4 to 6 to enter the title Pressing and holding the title display for 2 seconds or longer causes all currently entered title characters to disappear 8 Touch and hold MEMO for 2 seconds or longer You will hear a long beep and the title is stored in memory P e Wio switch the title display to the clock or other display Touch the centre of the display E When a
102. that of the curve as possible l PE to be compensated Making the frequency characteristics as flat as i possible is called compensation Q curve Q On this unit frequency characteristics can be compensated by P EQ Parametric Equalizer Q curve 20 Q curve 1 F Centre frequency G Gain output level Q Q curve Parametric Equalizer Parameters Sts F Celia F G a F G dB 3 2kHz 4dB 1 SkHz 40B 7 SEDAN 1 Rear 250 Hz 10 8kHz 5dB 1 SEDAN 2 5 1 1 8kHz 0dB 5 7 7 3 i 4 5 MINI VAN 1 6 22 DXZ948RMP Radio Operations Screen displays in the radio mode E Main display This is displayed by pressing the ROTARY knob and selecting the radio mode Preset No display Reception band Title display indicator Frequency display Touching the left of the display for 1 second or longer switches the simple operation display NW SIMPLE MODE gt xx mm Title display Frequency display Frequency display The frequency currently being received is displayed Touching gt or the th in the standard operation display allows you to perform seek tuning or manual tuning Title display Displays the name of the broadcast channel currently being received Touching this name switches the display Reception band display AM AM band name FM1 FM band name Preset No display Touching tt in th
103. the front For details on the P EQ function see P EQ adjustment cf page 21 5 1ch Surround Decoder Operations Changing settings 2 Touch 4 gt 4 on the setting item display to When a 5 1ch surround decoder is connected select the item to set settings relating to music in the adjust mode are Touching tw on the left of the display changed switches main items 1 item at a time Touching gt on the left of the display Selecting setting items switches sub items continuously l l Touching 4 on the centre of the ENEE display switches the sub items 1 item at a settings are changed l time Touching gt switches sub items For details of other items that are not changed continuously see Changing settings cf Page 39 at SEH u e e 3 When THROUGH is displayed at the right Operations Common to Each Mode P of the display touch THROUGH to switch to 1 Press the A button the adjustment details display The mode changes to the adjust mode 4 Either touch 4454 on the right of the display or turn the ROTARY knob to set the details i KA ADJ UST MODE CENTER SP ON SOUND E To return to the original mode 1 Press the A button again Setting items CENTER SP SRD SP SUB WOOFER e Setting the speaker ON OFF cf page 64 FRONT HPF CENTER HPF SRD HPF SUB W LPF e Adjusting the speaker filter frequency cf Page 64 SP GAIN e Adjusting the spe
104. tion is in use When you load a CD while the 2 ZONE function is in use the functions of the internal mode on this unit change to CD and play starts automatically 1 Press the TA button on the unit to switch the 2 ZONE function operation mode The display for the equipment Speaker or headphone that can be currently operated is switched 2 Press and hold the TA button for 1 second or longer to select the 2 ZONE type The INT or EXT display is toggled 3 Press the ROTARY knob Each press of the ROTARY knob while INT is displayed switches the mode as follows Radio gt CD AUX gt Radio Each press of the ROTARY knob while EXT is displayed switches the mode as follows AUX A CD changer DVD changer A TV gt AUX The mode of equipment that is not connected is not displayed 1When the TV mode is selected the mode automatically changes to the VIR mode and cannot be changed Operations Common to Each Mode Screen display in the title entry mode E Main display This is displayed when the title entry mode is selected cf page 14 Text type Entered text display display Title display Text type display A Capital alphabet letters a Small alphabet letters 0 9 Numbers 12 Symbols A Umlaut Title display The currently entered title is displayed Touch 4 Kb to determine the entry position Touching and holding the button for 2 secon
105. to this unit e This can be set when AUX TEL is set to AUX e The factory default setting is MID 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select AUX SENS under SETTING ADJ UST MODE AUX SENS MID 3 Either touch W on the right of the display or turn the ROTARY knob to set the input level Select one of LOW MID or HIGH 4 Press the A button to return to the original mode 48 DXZ948RMP Setting the car speaker output for the cellular phone Optional TEL 002 e To output telephone calls set the cellular phone e The factory default setting is RIGHT 1 Press the A button to set the adjust mode 2 Touch 454 on the setting item display to select TEL SP under SETTING ADS OST MODE TEL SP RIGHT 3 Either touch 4 W on the right of the display or turn the ROTARY knob to select LEFT or RIGHT LEFT Telephone calls can be heard on the front left soeaker connected to this unit RIGHT Telephone calls can be heard on the front right speaker connected to this unit 4 Press the A button to return to the previous mode Cellular phone interrupt setting If you connect this unit and your cellular phone with a unit Optional TEL 002 you can listen to your telephone calls on your car speakers e The factory default setting is OFF 1 Press the A
106. uch 4 on the right of the display to select ON or OFF 5 Touch RIN PTY This function enables you to listen to the selected programme type regardless of the function mode e One common PTY can be selected for DAB or RDS e Of DAB PTY and RDS PTY the PTY which is received earlier takes priority over the other e PTY broadcasts are not yet available in all countries In the INFO standby mode INFO stations have priority over PTY stations e In the TA standby mode TP stations have priority over PTY stations e For details on PTY cf page 28 refer to the section RDS operation of the respective owner s manual To set the PTY standby mode To cancel the PTY standby mode To cancel a PTY interrupt broadcast To select PTY PTY seek PTY preset memory Emergency broadcast When an emergency broadcast is received all function mode operations are stopped ALARM appears in the display and the emergency broadcast can be heard e For details on Emergency broadcast cf page 29 refer to the section RDS operation of the respective owner s manual To cancel an emergency broadcast 60 DXZ948RMP Switching the PTY and INFO display language You can select one of 4 languages English German Swedish or French for the PTY and INFO shown in the display e The factory default setting is ENGLISH e For details on Switching the PTY display language
107. under APPERNCE 3 Either touch 44 on the right of the display or turn the ROTARY knob to adjust the contrast ADJ UST MODE CONTRAST 6 APPERNCE This setting item can be adjusted within the range 1 to 11 Adjust this setting item while viewing how the appearance of the display changes 4 Press the A button to return to the original mode Making the LED blink when DCP is removed BLINK LED You can make the LED on this unit blink when the DCP is removed e The factory default setting is OFF 1 Press the A button to set to the adjust mode 2 Touch i on the setting item display to select BLINK LED under APPERNCE ADJ UST MODE BLINK LED OFF APPERNCE DXZ948RMP 43 Operations Common to Each Mode 3 Either touch 4 on the right of the display or turn the ROTARY knob to select ON or OFF 4 Press the A button to return to the original mode Setting the beep for when buttons are operated BEEP The short or long high pitched tone you hear when a button is operated is called a BEEP e The factory default setting is ON 1 Press the A button to set to the adjust mode 2 Touch 4 on the setting item display to select BEEP under APPERNCE ADJ UST MODE BEEP ON APPERNCE 3 Either touch 4h on the right of the display or turn the ROTARY knob to sel
108. wi RTN DXZ948RMP 17 AC Processor Ill Operations 3 Touch 4 on the ON OFF display The position effect is toggled ON OFF a x POSITION MODE FRONT BASIC OFF 3 When the position effect is set to OFF the position setting is not reflected on the music source This ends the position setting Press the SOUND button to return to the original mode 4 Touch B U to select BASIC a a WI POSITION MODE FRONT BASIC ON 3 Each touch of B U toggles between BASIC and USER 5 Touch 4 tt on the position basic menu No to select the position basic menu Position basic menu No Display Name Seat Position FRONT L Front left seat FRONT R Front right seat FRONT REAR FULL SEAT All seats 6 Press the SOUND button to return to the original mode Adjusting storing positions user memory With user memory pin point setting of speakers is enabled so that the same audio effect can be obtained from each speaker up to all listeners based upon the position basic menu Up to 5 adjustment setups can be stored to user memory T ALIGN time alignment The distance from the listener up to each speaker can be entered in 2 3 cm steps and the time that the sound reaches the listener from each speaker can be adjusted SP GAIN speaker gain Adjusts the speaker output level Adjust so that the volumes that are output from each speaker are all the same 18 DXZ948RM
109. y band DXZ948RMP 21 AC Processor Ill Operations FREQUENCY centre frequency selection Compensation of frequency Selects the frequency to be used as the centre characteristics of the frequency band to be compensated from The figure below shows the relationship the range 20Hz to 20kHZz between the centre frequency gain and Q 1 3 octave steps 31 points curve GAIN gain adjustment Adjusts the gain output level within the range Level Q curve Q 120B to 12d0B dB F 1dB steps 25 points F Q Q curve selection A Sets one of 1 3 5 7 or 20 as the sharpness of Gain 30B the Q curve G i Compensation There is no need to compensate frequency characteristics if they are flat no peaks or Frequency valleys when you have measured the frequency characteristics with a measuring device However sometimes the frequency Center Frequency F Frequency characteristics rise or fall in some places If this Hz happens the frequency characteristics must be Q curve compensated Create a frequency curve having The Q curve becomes sharper when the characteristics that are opposite to the centre numerical value is increased and smoother frequency of parts where the characteristics rise when the numerical value is decreased and fall to cancel out these peaks and values and make the frequency characteristics as flat Flat frequency characteristics can be made by selecting a Q curve opposite to

Clarion DXZ948RMP User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents