Home

Clarion DXZ675USB User's Manual

Contents

1. 12V GROUND AM 530 1710kHz FM 87 9 107 9MHz THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS 1 THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND 2 THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE CLARION CO LTD 50 KAMITODA TODA SHI SAITAMA KEN JAPAN This product includes technology owned by Microsoft Corporation and cannot be used or distributed Li without a license from MSLGP C MANUFACTURED Bottom View of Source Unit Fond de l appareil pilote LP 276 ond de l a o SERIAL No Clarion Co Lid Vista inferior de la unidad fuente PET MADE IN Be sure to unfold and read the next page Veuillez d plier et vous r f rer la page suivante Cerci rese de desplegar y de leer la p gina siguiente DXZ675USB 1 CONTROLS LES COMMANDES CONTROLES CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only Source unit Appareil pilote Unidad fuente www clarion com Dear Customer MENU Congratulations on your purchase of a Clarion mobile electronic products We are confident that you ll enjoy your Clarion experience There are many benefits to registering your product We invite you to visit our website at www clarion com to register your Clario
2. 3 Press the gt ENT button to cancel the trick play By connecting an optional DVD changer that supports CeNET wiring this unit can be used to control the DVD changer To view DVDs an optional monitor is required The DVD control and display functions supported by this unit are limited the unit does not support all the functions possible on a DVD changer For fullest functionality use the remote control unit provided with your DVD changer to control its operations For details consult the Owner s Manual provided with your DVD changer Note The following operations are the same as for CD and CD Changer modes Pause Track selection Fast forward fast backward Scan play Repeat play Random play See CD MP3 WMA AAC Operations page 16 19 and CD Changer Operations page 30 31 for details DXZ675USB 31 TV Operations Note e The following operations are performed the same as for radio mode Channel selection Storing channels in memory Calling channels from memory Auto store Preset scan See Radio Operations page 14 15 for details TV tuner functions When an optional TV tuner is connected through the CeNET cable this unit controls all TV tuner functions To watch TV requires a TV tuner and monitor Watching a TV 1 Press the SRC button and select the TV mode 2 Press the MENU button to select the desired TV band T
3. A channel not covered by your contract XM UPDATING SIRIUS CALL 888 lt gt 539 SIRI alternated e When your contract is expired SUB UPDATE 28 DXZ675USB Confirming your SIRIUS ID 1 Press the OPTION button 2 Push the SEEK PANEL leftward or rightward to select SID DISP 3 Press the gt ENT button Your SIRIUS ID will be displayed 12 digits number 4 To return to the previous mode press the OPTION button Displaying channel labels 1 Press the TITLE button to select the desired channel label Channel Category gt Title gt Artist gt Radio text Channel Channel selection 1 Channels are selected with the SEEK PANEL For details see the following operation descriptions Note e The audio output is muted and other button operations are not accepted during channel selection Tuning mode There are two channel selection modes quick tuning mode and step tuning mode O Quick tuning 1 Push the SEEK PANEL leftward or rightward and hold in position for 1 second or longer O Step tuning 1 Push the SEEK PANEL leftward or rightward Satellite Radio Operations Recalling a preset station A total of 18 satellite radio stations can be stored e XM 6 XM1 6 XM2 and 6 XM3 e SIRIUS 6 SR1 6 SR2 and 6 SR3 This allows you to store your favorite satellite radio stations in memory for later recall 1 Press the MENU button to select the d
4. Backup Eject function You can eject a disc by pressing the 4 button even if the engine key or ACC is at the OFF position 44 CAUTION When the disc is ejected press the 4 button to close the control panel If the control panel is left open you will hear a double beep and the control panel automatically closes 1 Press the 4 button The control panel opens 2 Press the 4 button The disc is ejected Note Always close the MOTORIZED FACE after opening it or ejecting the CD A CAUTION Be careful not to catch your hand or fingers while closing the MOTORIZED FACE Do not try to put your hand or fingers in the disc insertion slot Also never insert foreign objects into the slot Do not insert discs where adhesive comes out from cellophane tape or a rental CD label or discs with marks where cellophane tape or rental CD labels were removed It may be impossible to extract these discs from the unit and they may cause the unit to break down Listening to a disc already loaded in the unit Press the SRC button to select the CD MP3 WMA AAC mode When the unit enters the CD MP3 WMA AAC mode play starts automatically If there is no disc loaded the indication NO DISC appears in the title display DXZ675USB 17 CD MP3 WMA AAC Operations Loading a CD 1 Press the 4 button The MOTORIZED FACE opens 2 Insert a CD into the center of the CD SLOT with
5. e If the CD playing is not a CD text CD or no user title has been input M NO TITLE appears in the display 1 8 DXZ675USB e If MP3 WMA AAC disc is not input TAG NO TITLE appears in the display e For MP3 supports ID3 Tags V2 3 2 2 1 1 1 0 e Tag displays give priority to V2 3 2 2 e In the case of album Tags for WMA the information written into the extension header is displayed e Only ASCII characters can be displayed in Tags Selecting a track O Track up 1 Push the SEEK PANEL rightward to move ahead to the beginning of the next track 2 Each time you push the SEEK PANEL rightward the track advances ahead to the beginning of the next track O Track down 1 Push the SEEK PANEL leftward to move back to the beginning of the current track 2 Push the SEEK PANEL leftward twice to move back to the beginning of the previous track Fast forward fast backward O Fast forward 1 Push the SEEK PANEL rightward and hold in position for 1 second or longer O Fast backward 1 Push the SEEK PANEL leftward and hold in position for 1 second or longer For MP3 WMA AAC discs it takes some time until the start of searching and between tracks In addition the playing time may have a margin of error Folder Select This function allows you to select a folder containing MP3 WMA AAC files and start playing from the first track in the folder 1 Push the P CH button upward or downward Pu
6. MUTE TITLE CD SLOT INFORMACI N DEL REGISTRO DE PRODUCTO DE CLARION Para USA y Canada nomas www clarion com Querido Cliente Felicitaciones por su compra de producto electr nico m vil de Clarion Estamos seguros que usted gozar de su experiencia con el producto de Clarion Hay muchas ventajas al registrar su producto Le invitamos a que visite nuestro sitio en internet www clarion com para registrar su producto de Clarion Hemos hecho el registro de producto f cil en nuestro sitio La forma de registro es corta y f cil de completar Una vez que lo registre podremos proporcionarle la informaci n de su producto Note Be sure to unfold this page and refer to the front diagrams as you read each chapter Registrese en www clarion com es f cil mantener su producto de Clarion actualizado Remarque Veuillez d plier cette page et vous r f rer aux sch mas quand vous lisez chaque chapitre Nota Cuando lea los cap tulos despliegue esta p gina y consulte los diagramas ll DXZ675USB lll DXZ675USB Thank you for purchasing this Clarion product Please read this owner s manual in its entirety before operating this equipment x After reading this manual be sure to keep it in a handy place e g glove compartment Check the contents of the enclosed warranty card and keep it carefully with this manual This manual includes the operating procedures of the iPod interface CD DVD changer Sate
7. The sound turns off and MUTE blinks in the display 2 Press the g button again to cancel the mute mode Adjusting Sound Mode To change sound mode 1 Press the y button and select the sound mode to adjust M S W VOLUME PW o SOUND Vv 2 Push the SEEK PANEL leftward or rightward to select the item name S W VOLUME gt DZE gt BASS gt TREBLE gt S RESTORER lt gt HPF gt S W LPF gt BALANCE gt FADER Push the P CH button upward or downward to select the desired setting value In the case of item names appearing with the ENT suffix after the item name the gt i ENT button must be pressed to display the setting value BASS and TREBLE can be adjusted only when DZE is set to DZE OFF page 12 After completing settings press the A button to return to the previous mode Note e During sound adjustment mode if no operation is performed for more than 10 seconds this mode can be canceled and return to the previous mode O Adjusting the subwoofer output volume You can adjust the volume output from the unit s subwoofer output terminal 2 1 Select the S W VOLUME 3 1 Push the P CH button upward or downward to change the output volume The factory default setting is 0 Setting range 5 to 5 DXZ675USB 11 Basic Operations O Setting
8. frequency can be adjusted as follows The adjustment can only be performed when the DZE is set to DZE OFF 2 1 Select TREBLE 2 2 Press the y ENT button 2 3 Push the SEEK PANEL leftward or rightward and select from TREB GAIN lt gt TREB FREQ 3 1 Push the P CH button upward or downward to adjust the gain and FREQ center frequency TREB GAIN 6 to 6 The factory default setting is 0 TREB FREQ 8KHz 12KHz The factory default setting is 12K 3 2 Press the gt ENT button to return to the previous mode O Adjusting the sound restorer The sound restorer enriches the playback of all types of music files that have undergone any level of data compression 2 1 Select S RESTORER 3 1 Push the P CH button upward or downward to adjust Each time you push the P CH button the sound restorer changes in the following order OFF o 1 o 2 o 3 x The factory default setting is OFF Set this adjustment in accordance with the music source used OFF For music sources compressed at high bit rate 1 For music sources compressed for high quality at low bit rate 2 For music sources compressed for standard quality at low bit rate 3 For music sources compressed for low quality at low bit rate O Setting high pass filter 2 1 Select HPP 3 1 Push the P CH button upward or downward to select the setting Each time you pus
9. button must be pressed to display the setting value After completing settings press the OPTION button to return to the previous mode O Setting the clock 2 1 Select CLOCK EDIT 3 1 Press the y ENT button 3 2 Push the SEEK PANEL leftward or rightward to select the hour or the minute 3 3 Push the P CH button upward or downward to set the correct time The clock is displayed in 12 hour format 3 4 Press the yy ENT button to store the time into memory Note e You cannot set the clock when it is displayed with only the ignition on If you drain or remove the car s battery or take out this unit the clock is reset While setting the clock if another button or operation is selected the clock set mode is canceled 20 DXZ675USB O Setting the contrast You can adjust the display contrast to match the angle of installation of the unit x The factory default setting is 8 Adjustment level 1 to 16 2 1 Select CONTRAST 3 1 Push the P CH button upward or downward to adjust the contrast O Turning the screen saver function on or off This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order You can turn on or off this function If the button operation is performed with the screen saver function on the operation display corresponding to the button oper
10. radio mode only DISP button e Press to alternate among action display title display and Clock time display etc 8 DXZ675USB O Radio Satellite Radio modes BND button e Switches reception band 4 gt gt buttons Moves preset channels up and down SCN button e Press to perform preset scan Press and hold the button for 2 seconds or longer to perform auto store In the Satellite Radio mode press once to perform category scan hold depressed for 1 second or longer to perform preset scan O CD MP3 WMA AAC and USB modes BND button e Press to play the first track H4 gt PI buttons e Press to move the tracks up and down e Press and hold the button for 1 second or longer to perform fast forward fast backward Functions of Remote Control Unit Buttons p11 button e Switches between playback and pause SCN button e Press to perform scan play e When in MP3 WMA AAC and USB modes press and hold the button for 1 second or longer to perform folder scan play RPT button e Press to perform repeat play When in MP3 WMA AAC and USB modes press and hold the button for 1 second or longer to perform folder repeat play RDM button e Press to perform random play When in MP3 WMA AAC and USB modes press and hold the button for 1 second or longer to perform folder random play O CD changer DVD changer modes BND button e Press to switch to next disc in ascending o
11. switched O Category scan CATEGORY SCN In a category scan broadcast channels in the same category as the current channel are selected about every 10 seconds 1 Press the OPTION button 2 Push the SEEK PANEL leftward or rightward to select CATEGORY SCN 3 Press the gt ENT button Note e Category scanning is not available when no category is defined for the current channel Preset scan PRESET SCN A preset scan scans the channels up to 18 channels stored in the preset memory about every 10 seconds 1 Press the OPTION button 2 Push the SEEK PANEL leftward or rightward to select PRESET SCN 3 Press the gt ENT button DXZ675USB 29 CD Changer Operations Note The following operations are the same as for CD mode Pause Track selection Fast forward fast backward Scan play Repeat play Random play See CD MP3 WMA AAC Operations page 16 19 for details CD changer functions When an optional CD changer is connected through the CeNET cable this unit controls all CD changer functions This unit can control a total of 2 changers Press the SRC button and select the CD changer mode to start play If 2 CD changers are connected press the SRC button to select the CD changer for play If NO MAGAZINE appears in the display insert the magazine into the CD changer DISC CHECK appears in the display while the player
12. the Digital Z Enhancer This unit are provided with 3 types of sound tone effects stored in memory Select the one you prefer The factory default setting is DZE OFF 2 1 Select the DZE 3 1 Press the Py ENT button 3 2 Push the SEEK PANEL leftward or rightward to select the tone effect Each time you push the SEEK PANEL the tone effect changes in the following order DZE OFF lt gt DZE 1 lt gt DZE 2 lt gt DZE 3 DZE OFF no sound effect DZE 1 Suitable for genuine speakers DZE 2 Suitable for separate speakers DZE 3 Suitable for co axial speakers 3 3 When the DZE 1 DZE 2 or DZE 3 is set push the P CH button upward or downward to change the DZE level from 3 to 3 The factory default setting is 0 3 4 Press the gt ENT button to return to the previous mode Compensation There is no need to compensate frequency characteristics if they are flat no peaks or valleys when you have measured the frequency characteristics with a measuring device However sometimes the frequency characteristics rise or fall in some places If this happens the frequency characteristics must be compensated Create a frequency curve having characteristics that are opposite to the center frequency of parts where the characteristics rise and fall to cancel out these peaks and values and make the frequency characteristics as flat as possible
13. then press the y ENT button to perform scan play TRACK SCN appears in the display Scan play starts from the next track after the track currently being played Folder scan play This function allows you to locate and play the first 10 seconds of the first track of all the folders on an MP3 WMA AAC disc 2 Push the SEEK PANEL leftward or rightward to select SCN 3 Push the P CH button upward or downward to select ALL and then press the yy ENT button to perform folder scan play FOLDER SCN appears in the display Folder scan play starts from the next folder after the folder currently being played Repeat play This function allows you to play the current track repeatedly 2 Push the SEEK PANEL leftward or rightward to select RPT 3 Push the P CH button upward or downward to select A and then press the Py ENT button to perform repeat play TRACK RPT appears in the display O Folder repeat play This function allows you to play a track currently being played in the MP3 WMA AAC folder repeatedly 2 Push the SEEK PANEL leftward or rightward to select RPT 3 Push the P CH button upward or downward to select ALL and then press the yy ENT button to perform folder repeat play FOLDER RPT appears in the display Random play This function allows you to play all tracks recorded on a disc in a random order 2 Push the S
14. to store the setting DXZ675USB 23 USB Operations ERATIONS OF ACCESSORIES USB memory device operation Note The following operations are the same as for CD mode Pause Track selection Fast forward fast backward Top function Scan play Repeat play Random play Folder selection List search function See CD MP3 WMA AAC Operations page 16 19 for details About USB memory USB is an acronym for Universal Serial Bus and refers to an external bus standard supporting data transfer rates of 12 Mbps This unit is compatible with USB 1 1 2 0 with maximum data transfer rates of 12 Mbps USB memory devices that can be played by connecting to the unit s USB cable are limited to those recognized as USB mass storage class devices operation is not guaranteed with all USB memory devices Devices compatible with USB Mass Storage Class can be used merely by connecting to the host device without need for special drivers or application software Consult the manufacturer of your USB memory device for information regarding whether it is supported by USB Mass Storage Class standards Audio files playable on this unit are limited to MP3 WMA AAC files For details see the section MP3 WMA AAC page 16 Copy protected WMA AAC files cannot be played on this unit 24 DXZ675USB To prevent the accidental loss of data always back up important data on your computer
15. CANCEL 3 1 Push the P CH button upward or downward to select ON or OFF ON Use with connected AMP OFF Use with inside AMP O Setting the car speaker output for the cellular phone When the AUX input cable is used to connect a AUX BLUETOOTH BB BLT370 sold separately The factory default setting is R x To output the telephone calls set the cellular phone interrupt to ON 2 1 Select TEL SPEAKER 3 1 Push the P CH button upward or downward to select R or L eR Telephone calls can be heard on the front right speaker connected to this unit eL Telephone calls can be heard on the front left speaker connected to this unit DXZ675USB 21 Operations Common to Each Mode O Cellular phone interrupt setting If you connect this unit and your cellular phone with a separately sold cable you can listen to your telephone calls on your car speakers When the AUX input cable is used to connect a AUX BLUETOOTH BB BLT370 sold separately x The factory default setting is OFF 2 1 Select TEL SWITCH 3 1 Push the P CH button upward or downward to select the setting in the following order OFF gt ON gt MUTE e OFF This unit continues normal operation even when the cellular phone is used ON You can listen to your telephone calls from the speakers connected to this unit x When listening to your calls on your car speak
16. EEK PANEL leftward or rightward to select RDM 3 Push the P CH button upward or downward to select A and then press the Py ENT button to perform random play TRACK RDM appears in the display O Folder random play This function allows you to play all the tracks of all the folders recorded on an MP3 WMA AAC disc in a random order 2 Push the SEEK PANEL leftward or rightward to select RDM 3 Push the P CH button upward or downward to select ALL and then press the yy ENT button to perform folder random play FOLDER RDW appears in the display O To cancel the trick play 2 Push the SEEK PANEL leftward or rightward to select TRICK OFF 3 Press the gt ENT button to cancel the trick play DXZ675USB 19 Operations Common to Each Mode To change adjustment setting 1 Press and hold the OPTION button for 1 second or longer to switch to the adjustment selection display Push the SEEK PANEL leftward or rightward to select the item name CLOCK EDIT gt CONTRAST gt SCREEN SAVER gt MSG INPUT gt AUTO SCROLL gt SCROLL SPEED lt gt DIMMER gt BLINK LED lt gt AMP CANCEL TEL SPEAKER gt TEL SWITCH gt SYSTEM CHECK Push the P CH button upward or downward to select the desired setting value In the case of display appearing ENT the ENT
17. ICATIONS oia ni i 1 FEATURES Motorized Full Dot LCD with SLIDETRAK 6ch 6V RCA Output 53W X 4 Built in MOSFET Amplifier Built in LPF HPF DXZ675USB 1 2 PRECAUTIONS 1 When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible If moisture forms on the disc wipe it off with a soft cloth If moisture forms on the optical parts of the player do not use the player for about one hour The condensation will disappear naturally allowing normal operation Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip This unit uses a precision mechanism Even in the event that trouble arises never open the case disassemble the unit or lubricate the rotating parts Motorized Face 44 CAUTION USE OF CONTROLS ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL T
18. Making the frequency characteristics as flat as possible is called Compensation 1 2 DXZ675USB Compensation of frequency characteristics The figure below shows the relationship between the center frequency gain and Q curve Level Q curve Q dB 2E yf Qe x Frequency curve Center Frequency Frequency F Hz O Q curve The Q curve becomes sharper when the numerical value is increased and smoother when the numerical value is decreased Flat frequency characteristics can be made by selecting a Q curve opposite to that of the curve to be compensated Q curve 20 Q curve 1 O Adjusting the bass The bass gain bass FREQ center frequency and bass Q can be adjusted as follows The adjustment can only be performed when the DZE is set to DZE OFF 2 1 Select BASS 2 2 Press the ENT button 2 3 Push the SEEK PANEL leftward or rightward and select from BASS GAIN gt BASS FREQ gt BASS 0 Basic Operations 3 1 Push the P CH button upward or downward to adjust the gain the FREQ center frequency and the Q BASS GAIN 7 to 7 The factory default setting is 0 BASS FREQ 50Hz 80Hz 120Hz The factory default setting is 50 BASS Q 1 1 25 1 5 2 The factory default setting is 1 3 2 Press the gt ENT button to return to the previous mode O Adjusting the treble The treble gain and treble FREQ center
19. Ratio 85 dBA reference 1 W into 4 Q e Specifications and design are subject to change without notice for further improvement 36 DXZ675USB Clarion Co Ltd All Rights Reserved Copyright O 2006 Clarion Co Ltd PE 2901B 2006 12 Printed in China Imprim en Chine Impreso en China 280 8467 00
20. T button e Play or pause a track while in the CD MP3 WMA AAC mode e Confirm various settings Press the button to enter the preset memory mode radio 4 DXZ675USB P CH bution Push the button upward or downward to recall the stored station while in the radio mode e Select the folder while in the MP3 WMA AAC mode e Perform various settings A SOUND button e Press the button to enter the sound mode Press and hold the button for 1 second or longer to turn on or off the MAGNA BASS EXTEND mode ISR button e Recall ISR radio station in memory Press and hold the button for 2 seconds or longer Store current station into ISR memory radio mode only IR RECEIVER e Receiver for remote control unit Operating range 30 in all directions eel button Use the button to switch the user titles or track titles etc while in the CD MP3 WMA AAC mode Press and hold the button to switch the display indication Action display Title display and Clock time display K MUTE button Turn mute on or off 4 EJECT button e Press to open the MOTORIZED FACE and insert a CD into the CD SLOT e Press to eject a CD loaded in the unit VOL button e Push the button upward or downward to adjust the volume CD SLOT e CD insertion slot Display Items Source indication FM1 3 AM Radio mode SR1 3 Satellite radio mode SIRIUS XM1 3 Satellite radio mo
21. This unit does not support connections to a computer In addition connections made through a USB hub device are also not supported When a USB memory device is composed of two or more drives only one of the drives will be detected USB memory devices with security functions cannot be played Do not connect an iPod to the USB connector since playback and controls may not function properly To connect an iPod use the CeNET iPod interface For details see the section iPod BB Operations page 26 The order in which tracks are recorded may differ depending on the USB memory device connected the actual playback order may not be the same as that indicated on your computer s display A CAUTION Insert and remove a USB memory device only when the device is not being accessed Connecting or disconnecting the device at the following times may result in the loss of data Ifthe USB memory device is removed or power is disconnected during writing to the device When the device is subjected to static electricity or electric noise Do not leave a USB memory device unattended in an automobile Exposure to direct sunlight or high temperatures may cause deformation or other malfunction of the USB memory device USB Operations Connecting a USB memory device 1 Connect the USB memory device to the USB cable Playback will begin from the first file recorded on the USB memory device If the USB me
22. V1 or TV2 Each time the button is pressed the input selection toggles between TV1 and TV2 3 Push the SEEK PANEL leftward or rightward to tune in the desired TV station Watching a video The TV tuner has a VTR input terminal to which 1 external device can be connected Connect a 12 V video cassette player VCP or video cassette recorder VCR to the TV tuner input terminal 1 Press the OPTION button 2 Push the SEEK PANEL leftward or rightward to select TV VTR 3 Press the gt ENT button to enter the VTR mode 4 To return to the TV broadcast press the OPTION button 5 Press the gt ENT button to return to the TV mode 32 DXZ675USB Setting the TV diver You can change the reception setting for the TV antenna connected to the TV tuner i 2 Press the OPTION button to switch to the adjustment selection display Push the SEEK PANEL leftward or rightward to select TV DIVER 3 Push the P CH button upward or downward to set to ON or OFF ON Sets the diver setting to ON OFF Sets the diver setting to OFF Press the OPTION button to return to the previous mode 8 INCASE OF DIFFICULTY Problem Cause Measure Power does not turn on No sound is produced Fuse is blown Replace with a fuse of the same amperage If the fuse blows again consult your store of purchase Incorrect wiring Consult your
23. above appears press the reset button If the problem persists turn off the power and consult your store of purchase 35 DXZ675USB 10 SPECIFICATIONS FM Tuner Frequency Range 87 9 MHz to 107 9 MHz Usable Sensitivity 9 dBf 50dB Quieting Sensitivity 15 dBf Alternate Channel Selectivity 70 dB Stereo Separation 1 kHz 35 dB Frequency Response 3 dB 30 Hz to 15 kHz AM Tuner Frequency Range 530 kHz to 1710 kHz Usable Sensitivity 25 uV CD Player System Compact disc digital audio system Usable Discs Compact disc Frequency Response 1 dB 5 Hz to 20 kHz Dynamic Range 1 kHz 95 dB Harmonic Distortion 0 01 Audio Maximum Power Output 212 W 53 W X 4 ch Bass Control Action 80 Hz 14 dB 14 dB Treble Control Action 10 kHz 12 dB 12 dB Line Output Level CD 1 kHz 5 6 V Note General Power Supply Voltage 14 4 V DC 10 8 to 15 6 V allowable negative ground Current Consumption Less than 15 A Speaker Impedance 4 Q 4 Q to 8 Q allowable Auto Antenna Rated Current 500 mA or less Weight Source unit 2 75 lb 1 6 kg Weight Remote control unit 1 41 oz 40 g including battery Dimensions Source unit 7 Width X 2 Height X 6 1 8 Depth 178 W X 50 H X 158 D mm Dimensions Remote control unit 1 3 4 Width X 4 5 16 Height X 7 16 Depth 44 W X 113 H X 11 D mm Power Output 19 W RMS x 4 Channels at 4 Q and 1 THD N Signal to Noise
24. act discs humidity or dust Some CDs recorded in CD R CD RW mode Do not expose compact discs to direct heat may not be usable from heaters Handling Cleaning Compared to ordinary music CDs CD R and To remove fingermarks and dust use a soft CD RW discs are both easily affected by high cloth and wipe in a straight line from the temperature and humidity and some of CD R center of the compact disc to the and CD RW discs may not be played circumference Therefore do not leave them for a long time Do not use any solvents such as commercially available cleaners anti static New discs may Ball point pen spray or thinner to clean compact discs in the car Lai ea After using special compact disc cleaner let rougnness Roughness the compact disc dry off well before playing it around the edges If such discs are used the player may not work or the y i sound may skip Use a ball point pen or the like to remove any roughness from the edge of the disc Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen e Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks If you try to play such a compact disc you may not be able to get it back out of the CD player or it may damage the CD player Do not use compact discs that have large scratches are misshapen cracked etc Use of such discs may cause misoperation or damage To re
25. arkon Owner s manual Mode d emploi Manual de instrucciones DXZ675USB CD USB MP3 WMA AAC RECEIVER WITH CeNET CONTROL AUTORADIO CD USB MP3 WMA AVEC COMMANDE CeNET RECEPTOR DE CD USB MP3 WMA AAC CON CONTROL CeNET COMPACT A Plays mner UE Wea Gan ID3 TAG inl READY This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to consult the dealer or an experienced radio TV technician for help Cet appareil a t test et jug conforme aux limites des appareils num riques de Classe B aux termes de la Section 15 des R glements FCC Ces limites ont pour but d assurer une protection raisonnable contre les interf rences parasites dans une installation r sidentielle Cet appareil engendre utilise et peut mettre une nergie radio lectrique et s il n est pas install et utilis e
26. ation is shown for about 30 seconds and the display returns to the screen saver display The factory default setting is Pattern RANDOM 2 1 Select SCREEN SAVER 3 1 Press the gt ENT button 3 2 Push the P CH button upward or downward to select the setting Pattern RANDOM lt gt Pattern MESSAGE lt gt Pattern SS lt gt Pattern OFF 3 3 Press the y ENT button to return to the previous mode Entering message information Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting The factory default setting is Welcome to Clarion 2 1 Select MSG INPUT 3 1 Press the gt ENT button 3 2 Press and hold the MENU button for 1 second or longer to clear the old message 3 3 Push the SEEK PANEL leftward or rightward to move the cursor Operations Common to Each Mode 3 4 Press the MENU button to select a character type Each time you press the MENU button the character type changes in the following order Capital letters Small letters Numbers Symbols Umlaut gt Capital letters 3 5 Push the P CH button upward or downward to select the desired character 3 6 Repeat step 3 3 to 3 5 to enter up to 30 characters for message 3 7 Press and hold the gt ENT button for 2 seconds or longer to store the message in memory and cancel the input message mode x Press and hold the MENU button f
27. d before playback begins e Files may not play properly depending on the iTunes version under which an AAC file is encoded Precautions when creating MP3 WMA AAC disc O Usable sampling rates and bit rates 1 MP3 Sampling rate 8 kHz 48 kHz Bit rate 8 kbps 320 kbps VBR 2 WMA Bit rate 32 kbps 192 kbps 3 AAC Sampling rate 8 kHz 48 kHz Bit rate 8 kbps 320 kbps VBR O File extensions 1 Always add a file extension MP3 mp3 WMA wma or M4A m4a to MP3 WMA or AAC file by using single byte letters If you add a file extension other than specified or forget to add the file extension the file cannot be played 2 Files without MP3 WMA AAC data will not play The indication appears in the play time display if you attempt to play files without MP3 WMA ACC data O Logical format File system 1 When writing MP3 WMA AAC file on a CD R disc or CD RW disc please select ISO9660 level 1 2 or JOLIET or Romeo or APPLE ISO as the writing software format Normal play may not be possible if the disc is recorded on another format 2 The folder name and file name can be displayed as the title during MP3 WMA AAC play but the title must be within 64 single byte alphabetical letters and numerals including an extension 3 Do not affix a name to a file inside a folder having the same name O Folder structure 1 A disc with a folder having more than 8 hierarchical levels will be imp
28. de XM ces ISI AAG MOda Radio mode Preset No frequency USB USB mode pes e CD mode Track No playback time iPod iPod BB mode e MP3 WMA AAC mode CDC1 4 CD changer mode i A 3 Folder No track No playback time DVDC1 4 DVD changer mode CD DVD changer mode e TV1 2 TV mode z f Disc No track No playback time AUN A mode TV mode Preset No channel e TEL Telephone mode Clock time indication Operation status indication Titles indication Source icon 3 patterns A RDM Disc Folder random A RPT Disc Folder repeat A SCN Disc Folder scan RDM Track random RPT Track repeat WMA MP3 WMA AAC indication MANU Manual indication CAT MODE Category mode indication CH MODE Channel mode indication SAT Satellite indication SCN Track Preset Service scan AS Auto store M B E MAGNA BASS EXTEND ST Stereo indication radio only indication ae DZE Digital Z Enhancer indication SR Sound restorer indication LCD Screen In extreme cold the screen movement may slow down and the screen may darken but this is normal The screen will recover when it returns to normal temperature DXZ675USB 5 4 DCP The control panel can be detached to prevent Attaching the DCP theft When detaching the control panel store it 1 Insert the DCP so that the section on the in the DCP DETACHABLE CONTROL PANEL right side of the DCP catches on the hook case to pre
29. e improperly encoded Use only properly encoded MP3 WMA AAC files USB memory device isn t recognized The USB memory device is damaged Connectors are loose Disconnect the USB memory device and reconnect If the device is still not recognized try replacing with a different USB memory device Can t insert USB memory device DXZ675USB The USB memory devices has been inserted improperly Try reversing the connection direction of the USB device usually the brand name surface should be facing left The USB connector is broken Replace with a new USB memory device 9 ERROR DISPLAYS If an error occurs one of the following displays is displayed Take the measures described below to eliminate the problem Error Display ERROR 2 A CD is caught inside the CD deck and is not ejected Measure This is a failure of CD deck s mechanism and consult your store of purchase ERROR 3 ERROR 6 CD MP3 WMA AAC ERROR 2 A CD cannot be played due to scratches etc A CD is loaded upside down inside the CD deck and does not play A CD inside the CD changer is not loaded Replace with a non scratched non warped disc Eject the disc then reload it properly This is a failure of CD changer s mechanism and consult your store of purchase ERROR 3 A CD inside the CD changer cannot be played due to scratches etc Replace with a non scratched non warped d
30. ers you can adjust the volume by pushing the P CH button upward or downward MUTE The sound from this unit is muted during telephone calls Note e If connecting a hands free kit please ensure the setting is ON to receive the telephone audio through the system O Performing a system check 2 1 Select SYSTEM CHECK 3 1 Press and hold the gt ENT button for 1 second or longer SYSTEM CHECK appears in the display then the unit returns to the previous operation mode 22 DXZ675USB AUX function This system has an external input cable so you can listen to sounds and music from external devices connected to this unit O Selecting AUX IN sensitivity Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume The factory default setting is MID 1 Press the OPTION button AUX SENSE MID appears in the display 2 Push the P CH button upward or downward to select LOW MID or HIGH Entering titles Titles up to 10 characters long can be stored in memory and displayed for CD CD changer and TV stations The number of titles that can be entered for each mode are as follows Mode Number of titles Radio mode 30 titles 50 titles 20 titles CD mode TV mode Number of titles 100 titles CD changer mode DCZ625 connected 1 Press t
31. esired band 2 Push the P CH button upward or downward to select the desired preset station Preset memory 1 Press the MENU button to select the desired band 2 Select the desired channel with quick tuning or step tuning 3 Press the gt ENT button to enter the P CH memory screen 4 Push the P CH button upward or downward to select the desired preset channel 5 Press and hold the y ENT button for 2 seconds or longer to store the current channel into preset memory Receiving stations selected by category Satellite Radio allows you to select broadcast channel category contents 1 Press and hold the MENU button for 1 second or longer to select the category selection mode lt press once again return to the channel selection mode 2 Push the P CH button upward or downward to change the category item 3 Push the SEEK PANEL leftward or rightward to tune in a station Note e When the category selection mode is entered the category of the last received channel is displayed first e The category selection mode is canceled when no channel with the selected category can be found If the SEEK PANEL are not pushed within 7 seconds the category selection mode is canceled and resumes to the channel mode Scan function There are two scan modes the category scan mode and the preset scan mode During scanning channels are displayed in abbreviated form the display mode cannot be
32. ferring to the front diagrams of chapter CONTROLS on page ii unfold Basic Operations Adjusting the volume 1 Push the VOL button upward or downward to adjust the volume x The volume level is from 0 minimum to 33 A CAUTION Be sure to lower the volume before switching off the unit power or the ignition key The unit remembers its last volume maximum setting If you switch the power off with the volume up when you switch the power back a F P on the sudden loud volume may hurt your Switching the display Press and hold the TITLE button for 1 second or longer to select the desired display O When the power is turned on 1 Each time you press and hold the TITLE button for 1 second or longer the display hearing and damage the unit Turning on off the power Note e Be careful about using this unit for a long time without running the engine If you drain the car s battery too far you may not be able to start the engine and this can reduce the service life of the switches in the following order Action display gt Title display gt Clock time display gt Action display battery When the power is turned off 1 Press the SRC button 1 Each time you press the TITLE button the The mode that was previous active is clock time appears or disappears in the displayed display 2 Press and hold the SRC button for 1 second or longer to turn off the power for the uni
33. h the P CH button the setting changes in the following order THRGH gt 50Hz gt 80Hz gt 120Hz The factory default setting is THRGH through O Setting low pass filter 2 1 Select S W LPF 3 1 Push the P CH button upward or downward to select the setting Each time you push the P CH button the setting changes in the following order THRGH gt 50Hz gt 80Hz gt 120Hz The factory default setting is THRGH through O Adjusting the balance 2 1 Select BALANCE 3 1 Push the P CH button upward to emphasize the sound from the right speaker push the button downward to emphasize the sound from the left speaker The factory default setting is 0 Adjustment range L12 to R12 O Adjusting the fader 2 1 Select FADER 3 1 Push the P CH button upward to emphasize the sound from the front speaker push the button downward to emphasize the sound from the rear speaker The factory default setting is 0 Adjustment range R12 to F12 DXZ675USB 13 Radio Operations Listening to the radio 1 Press the SRC button and select the radio mode The frequency appears in the display 2 Press the MENU button and select the radio band Each time the button is pressed the radio reception band changes in the following order FM1 3 FM2 3 FM3 3 AM gt FM1 3 Push the SEEK PANEL leftward or righ
34. he SRC button to select the mode you want to enter a title CD CD changer or TV 2 Select and play a CD in the CD changer or tune in to a TV station for which you want to enter the title 3 Press the OPTION button 4 Push the SEEK PANEL leftward or rightward to select TITLE INPUT 5 Press the gt ENT button The display switches to the title input display 6 Push the SEEK PANEL leftward or rightward to move the cursor Operations Common to Each Mode 7 Press the MENU button to select a character Each time you press the MENU button the character changes in the following order Capital letters Small letters Numbers Symbols Umlaut Capital letters 8 Push the P CH button upward or downward to select the desired character 9 Repeat steps 6 to 8 to enter up to 10 characters for the title 10 Press and hold the gt ENT button for 2 seconds or longer to store the title into memory Clearing titles 1 w mn Select and play a CD in the CD changer or tune in to a TV station for which you want to clear the title Press the OPTION button Push the SEEK PANEL leftward or rightward to select TITLE INPUT Press the gt ENT button The display switches to the title input display Press and hold the MENU button for 1 second or longer All characters in the title disappear Press and hold the y ENT button for 2 seconds or longer
35. he stations stored in preset memory in order This function is useful when searching for a desired station in memory 1 Press the OPTION button 2 Push the SEEK PANEL leftward or rightward to select PRESET SCN 3 Press the gt ENT button x When a desired station is tuned in press the ENT button again to continue receiving that station Instant station recall ISR Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button The ISR function even operates with the unit in other modes O ISR memory 1 Select the station that you wish to store in ISR memory 2 Press and hold the ISR button for 2 seconds or longer O Recalling a station with ISR In any mode press the ISR button to turn on the radio function and tune the selected radio station ISR appears in the display Press the ISR button again to return to the previous mode DXZ675USB 15 CD MP3 WMA AAC Operations MP3 WMA AAC What is MP3 MP3 is an audio compression method and classified into audio layer 3 of MPEG standards This audio compression method has penetrated into PC users and become a standard format This MP3 features the original audio data compression to about 10 percent of its initial size with a high sound quality This means that about 10 music CDs can be recorded on a CD R disc or CD RW disc to allow a long listening time without ha
36. his unit uses motorized face to make large screen displays possible When you use the motorized face be sure to close it 44 CAUTION BE CAREFUL NOT TO GET YOUR FINGERS CAUGHT WHEN OPENING AND CLOSING THE MOTORIZED FACE Ts For safety s sake always close the MOTORIZED FACE before leaving this unit unused for a prolonged period or switching OFF the ignition key If you switch OFF the ignition key with the MOTORIZED FACE tilted the MOTORIZED FACE does not close Before the MOTORIZED FACE closes there may be a braking sound from the safety mechanism This is normal DXZ675USB 3 If you move the MOTORIZED FACE by hand this may create play To correct this play with the power on for the unit press the 4 button to close the MOTORIZED FACE 4 After a disc is ejected the MOTORIZED FACE automatically returns to the tilted or closed state If there is any obstruction when the MOTORIZED FACE tries to close the safety mechanism is triggered and the MOTORIZED FACE returns to the open state If this happens remove the obstruction then press the 4 button 5 To avoid scratching the compact disk keep the CD level when inserting or removing them Handling Compact Discs Use only compact discs bearing the SB or Storage GIS mark Do not expose compact discs to direct Ce sunlight or any heat source Do not play heart shaped octagonal or other Do not expose compact discs to excess specially shaped comp
37. ill stop when all tracks have been played Selecting category from the iPod menu 1 Press the MENU button The iPod menu categories will be displayed 2 Push the P CH button upward or downward to switch between categories The iPod menu categories alternate in the following order Composers lt gt Playlist Artists gt Albums lt gt Songs gt Genres gt Composers Note The iPod menu mode can be canceled by performing the following operation e Press the MENU button 3 Push the SEEK PANEL rightward to select the category 4 When the track name display is showing push the SEEK PANEL rightward Playback will begin from the first track in the selected category and the iPod menu mode will be canceled Subfolders may be displayed depending on the category In this case push the P CH button upward or downward to switch between subfolders then push the SEEK PANEL rightward to select the desired subfolder When the track name display is showing pushing the SEEK PANEL leftward will return the display to the currently playing folder name display 5 Push the P CH button upward or downward to select a track within a category 6 Push the SEEK PANEL rightward to play the desired track About title display This unit supports the display of title information transmitted from a connected iPod Character code information is UTF 8 dis
38. is useful when you want to select a desired CD 1 Press the OPTION button 2 Push the SEEK PANEL leftward or rightward to select SCN 3 Push the P CH button upward or downward to select ALL and then press the yy ENT button DISC SCN appears in the display and disc scan play starts O Disc repeat play After all the tracks on the current disc have been played disc repeat play automatically replays the current disc over from the first track This function continues automatically until it is cancelled 1 Press the OPTION button 2 Push the SEEK PANEL leftward or rightward to select RPT 3 Push the P CH button upward or downward to select ALL and then press the yy ENT button DISC RPT appears in the display and disc repeat play starts CD Changer Operations O Disc random play The disc random play selects and plays individual tracks or discs automatically in no particular order This function continues automatically until it is cancelled 1 Press the OPTION button 2 Push the SEEK PANEL leftward or rightward to select RDM 3 Push the P CH button upward or downward to select ALL and then press the yy ENT button DISC RDM appears in the display and disc random play starts DVD Changer Operations O To cancel the trick play 1 Press the OPTION button 2 Push the SEEK PANEL leftward or rightward to select TRICK OFF
39. isc CD changer ERROR 6 A CD inside the CD changer cannot be played because it is loaded upside down Eject the disc then reload it properly ERROR 2 A DISC inside the DVD changer cannot be played This is a failure of DVD mechanism and consult your store of purchase ERROR 3 A DISC cannot be played due to scratches etc Retry or replace with a non scratched non warped disc ERROR 6 b o D o o S Q A DISC inside the DVD changer cannot be played because it is loaded upside down Eject the disc then reload it properly ERROR P Parental level error Set the correct Parental level ERROR R Region code error Eject the disc and replace correct region code disc ERROR 1 A communication error occurs between the iPod and the iPod CeNET Controller Disconnect the iPod then connect it again NO IPOD There is no iPod connected Please connect the iPod ERROR 1 Device mechanism is damaged The unit s mechanism may be damaged Consult your dealer NO FILE USB memory device contains no audio files Insert USB memory device containing audio files DSP ERROR USB connector is short circuited or USB memory device is overloaded Disconnect USB memory device then hold SRC button depressed to turn power OFF Then press SRC button once again to turn power ON If an error display other than the ones described
40. ividual radio stations in memory Pushing the P CH button upward or downward recalls the stored radio frequency automatically 1 Press the MENU button and select the desired band FM or AM 2 Push the P CH button upward or downward to recall the stored station Press the gt ENT button to enter the preset memory mode Push the P CH button upward or downward then press and hold the gt i ENT button for 2 seconds or longer to store that station into preset memory Manual memory 1 Select the desired station with seek tuning or manual tuning 2 Press the gt ENT button to enter the preset memory mode 3 Push the P CH button upward or downward to select a desired station then press and hold the gt ENT button for 2 seconds or longer to store the current station into preset memory Radio Operations Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially If 6 receivable stations cannot be received a previously stored station remains unoverwritten at the memory position 1 Press the MENU button and select the desired band FM or AM 2 Press the OPTION button 3 Push the SEEK PANEL leftward or rightward to select AUTO STORE 4 Press and hold the gt ENT button for 2 seconds or longer The stations with good reception are stored automatically to the preset channels Preset scan Preset scan receives t
41. llite Radio Receiver and TV tuner connected via the CeNET cable The iPod interface CD DVD changer and TV tuner have their own manuals but no explanations for operating them are described iPod is a trademark of Apple Computer Inc registered in the U S and other countries Contents AAA ii AAA 1 2 PRECAUTIONS 2 MOtOnIZOGNFACE so uti td deeded astern Atal 2 Handling Compact Discs 3 3 NOMENCLATUREoccconnncccnccnncnnncnnnnnannnenannnna 4 Names of the Buttons and Their Functions wd Display ItemMS oonconocccnonnconnanncnoranonacnnannos aD 5 6 7 7 8 LCD Screen Inserting the Battery oe eee ve Functions of Remote Control Unit Buttons 0 0 00 eeeeceeseeeeeeeeeeeeeeeeeeeaeeeeeaeeaeeeaesaeeeaesaeeeeeeaeeeeeeatens 6 OPERATIONS cccicincocioccincacinc ninncnanin antenna ie caian dedicada ini isn cdi 10 Basic Operations A Radio Operat n Siessen la il a CD MP3 WMA AAC Operations cc ceceeceeeeeeceeeeeeeeeeeeeeeeeeseeeeaeeaeeeaeeaeeeaeeaeseeeeaeseaeeneseeseeseeeeeseeeens Operations Common to Each Mode _ 7 OPERATIONS OF ACCESSORIES ccicsnisicsceccctescicdesisiceduecweutvdessetesuccuaseocnudeveebecduceedescnsdadvadecdsteacesd USB Operations eniin hs dicen Ave AA ae iPod BB Operations Satellite Radio Operations CD Changer Operations DVD Changer Operations TV Operations 0 0 eee ite 8 IN CASE OF DIFFICULTY aa 9 ERROR DISPLAYS ono TO SPECIF
42. loads checks the magazine x If NO DISC appears in the display eject the magazine and insert discs into each slot Then reinsert the magazine back into the CD changer Note Some CDs recorded in CD R CD RW mode may not be usable A CAUTION CD ROM discs cannot be played from every CD changer it s depended on the model Displaying CD titles This unit can display title data for CD text CDs and user titles input with this unit 1 Press and hold the TITLE button for 1 second or longer to display the title 2 Press the TITLE button to change the title display 30 DXZ675USB Procedure to scroll a title Set AUTO SCROLL to ON or OFF The factory default setting is ON Refer to the subsection Setting the method for title scroll in section Operations Common to Each Mode O When set to ON The title is automatically kept scrolling O When set to OFF To scroll just 1 time Note e User title can t scroll Selecting a CD 1 Push the P CH button upward or downward to select a desired disc in the magazine If a CD is not loaded in a slot of magazine NO DISC appears in the display Other various play functions O Disc scan play Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD changer This function continues automatically until it is cancelled Disc scan play
43. mory device is not recognized press the SRC button to switch the source to the device x Always insert the USB memory device fully into the connector Incomplete connections may cause the USB memory device not to be recognized Depending on the number of tracks recorded some amount of time may be required until all tracks are read into the unit x The order in which tracks are recorded may differ depending on the USB memory device connected the actual playback order may not be the same as that indicated on your computer s display To listen to tracks on a connected USB memory device ils Press the SRC button to switch the source When USB memory device is selected playback will begin from the location at which playback was previously stopped x When a USB memory device is connected the USB mode will be displayed x When a USB memory device is disconnected and then reconnected playback will begin from the beginning of the USB memory device To stop play 1 Press the SRC button and switch the function to a source other than the USB memory A CAUTION Do not remove the USB memory device when the USB mode is selected since it may result in loss or damage to data on the USB memory device Always backup and save important data on your computer 2 Remove the USB memory device from the USB cable DXZ675USB 25 iPod BB Operations O iPod BB This section describes operations when co
44. move a compact disc from its storage Case press down on the center of the case and lift the disc out holding it carefully by the edges Do not use commercially available CD protection sheets or discs equipped with stabilizers etc These may damage the disc or cause breakdown of the internal mechanism DXZ675USB 3 3 NOMENCLATURE Note Be sure to read this chapter referring to the front diagrams of chapter CONTROLS on page ii unfold Names of the Buttons and Their Functions RELEASE bution Deeply push in the button to unlock the DCP SRC button e Press the button to turn on the power Press and hold the button for 1 second or longer to turn off the power Switch the operation mode among the radio mode etc OPTION button e Press the button to enter the option mode e Press and hold the button for 1 second or longer to enter the adjust mode PEE PANEL The SEEK PANEL allows the controls on the ends to be moved to right or left to permit station tuning radio track selection CD and to perform various settings in the adjustment mode MENU button e Switch the band or seek tuning or manual tuning while in the radio mode Press the button to enter the list search mode while in the CD MP3 WMA AAC mode e Press and hold the button for 1 second or longer to play the first track while in the CD MP3 WMA AAC mode e Press the button to change the character gt EN
45. n product We have made product registration simple with our easy to use website The registration form is short and easy to complete Once you re registered we can keep you informed of important product information OPTION gt ENT SRC at 9 5j o D Register at www clarion com its easy to keep your Clarion product up to date MOS FET 53Wx4 Pour les tas Unis et le Canada seulement www clarion com md E 1 R NALNE P CH Ela o ra INFORMATIONS DE L ENREGISTREMENT DE PRODUITS CLARION Cher client 8 SOUND o AS gt M a Nous vous remercions d avoir achet ce produit lectronique mobile Clarion Nous ISR sommes confiants que vous appr cierez votre exp rience Clarion ll y a beaucoup d avantage a enregistrer votre produits Nous vous invitons a visiter notre IR RECEIVER site Web www clarion com pour enregistrer votre produit Clarion Nous avons facilit la tache d enregistrement de produit simple et facile grace a notre site Web Le formulaire d enregistrement est court et facile compl ter Lorsque vous With the MOTORIZED FACE opened Ouvrez la FACE MOTORISEE tes enregistrer nous pouvons vous tenir inform des informations important de produits Apertura del FRONTAL MOTORIZADO Enregistrer www clarion com c est facile de mettre jour votre produit Clarion 4 EJECT W
46. n stricte conformit avec ces instructions il peut provoquer des interf rences parasites sur les liaisons radiophoniques Ceci ne garantit par pour autant qu une installation particuli re ne provoquera aucune interf rence Si l appareil engendre des interf rences sur la r ception des ondes radio ou de t l vision ce qui peut tre v rifi en mettant l appareil hors tension puis sous tension l utilisateur est invit a consulter son revendeur ou un technicien expriment en radio t l vision pour lui demander conseil Este equipo ha sido probado y se ha comprobado que cumple con los limites de un dispositivo digital de clase B segun lo indicado en la Parte 15 de las Normas de FCC Estos l mites se han establecido para ofrecer una protecci n razonable contra interferencias perjudiciales en instalaciones residenciales Este equipo genera emplea y puede radiar energ a de radiofrecuencia y si no se instala y emplea de acuerdo con las instrucciones puede causar interferencias perjudiciales en las radiocomunicaciones Sin embargo no se garantiza que las interferencias no ocurran en una instalaci n en particular Si este equipo causa interferencias perjudiciales en la recepci n de radio o de televisi n lo cual podr determinarse conectando y desconectando la alimentaci n del equipo se aconseja al usuario que consulte al abastecedor o que pida ayuda a un t cnico en radio televisi n experimentado MODEL Clarion
47. nnected to a CeNET Pod Interface EA 1276B Hereinafter iPod Interface EA 1276B is abbreviated as iPod BB Note e See the iPod BB Owner s Manual for details regarding iPod BB connections and operation conditions Connecting an iPod When an iPod is connected to the iPod BB interface the Repeat set on the iPod will become All repeat play instead Likewise Shuffle set on the iPod will become as follows e Shuffle Albums play Random play e Shuffle Songs play gt All random play The Pod BB interface has two modes the Play mode and the iPod menu mode for selecting tracks Switch between these modes by pressing the MENU button Select iPod BB Interface 1 Press the SRC button Playback will begin from the last file that was played on the iPod alone or through the iPod BB Note The following operations in Play mode operate the same as in CD mode Track selection SEEK PANEL Fast forward fast backward SEEK PANEL Pause gt ENT See CD MP3 WMA AAC Operations page 16 19 for details 26 DXZ675USB Other various play functions in Play mode Notes e These functions are not supported when in the iPod menu mode e The Random function set on the iPod or when connected to iPod BB remains the same after attachment detachment of the iPod The iPod BB can be set simultaneously for All repeat and All random 1 Pres
48. or 1 second or longer to cancel the input message Then press and hold the y ENT button for 2 seconds or longer to store the message and the message return to the default setting O Setting the method for title scroll Set how to scroll in CD TEXT MP3 WMA AAC title x The factory default setting is ON 2 1 Select AUTO SCROLL 3 1 Push the P CH button upward or downward to select ON or OFF ON To scroll automatically e OFF To scroll just 1 time O Setting the speed of the title scroll This function allows you to adjust the speed of the title scroll The factory default setting is 3 2 1 Select SCROLL SPEED 3 1 Push the P CH button upward or downward to select from 1 to 6 O Setting the dimmer control You can set the dimmer control HIGH MID LOW or OFF x The factory default setting is MID 2 1 Select DIMMER 3 1 Push the P CH button upward or downward to select HIGH MID LOW or OFF O Anti theft indicator The red Anti theft indicator is a function for preventing theft When the DCP is removed from the unit this indicator blinks x The factory default setting is OFF 2 1 Select BLINK LED 3 1 Push the P CH button upward or downward to select ON or OFF O Setting the external amplifier The factory default setting is OFF 2 1 Select AMP
49. ossible CD MP3 WMA AAC Operations O Number of files or folders 1 Upto 255 files can be recognized per folder Up to 510 files can be played 2 Tracks are played in the order that they were recorded onto a disc Tracks might not always be played in the order displayed on the PC 3 Some noise may occur depending on the type of encoder software used while recording Set the type of file to be played multi session function When a single disc holds both normal CD type tracks and MP3 WMA AAC type tracks use this command to select which type of track to play Default setting is CD When only one type of track either music CD or MP3 WMA AAC is recorded on a disc selecting either type will allow playback of the disc e When playing CCCD copy control CDs set to CD type 1 Press the OPTION button 2 Push the SEEK PANEL leftward or rightward to select MULTI SESS 3 Push the P CH button upward or downward to select CD or MP3 The mixed mode is switched between CD type or MP3 WMA AAC type e CD When playing music CD only MP3 When playing music MP3 WMA AAC only 4 When setting is completed remove the disc and reinsert it Disc In play function As long as the ignition key is turned to the ON or ACC position this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on
50. playable characters include English alphanumerics some symbols and some umlaut characters Unsupported characters will be replaced by asterisks DXZ675USB 27 Satellite Radio Operations This function is available when a Satellite Radio Receiver is connected through the CeNET cable This unit can control the following satellite radio receivers e XM Satellite Radio Receiver XMD1000 XM Smart Digital Adapter XM SDA e SIRIUS Satellite Radio Receiver SIRCL2 SIRCL3 Note When the function is differ depending to the connected receiver they are distinguished by the following notations XM for an XM Satellite Radio Receiver SIRIUS for a SIRIUS Satellite Radio Receiver Selecting a Satellite Radio mode 1 Press the SRC button The system changes to the specified Satellite Radio mode Selecting a band 1 Press the MENU button to select a band This changes the reception band as follows XM XM1 gt XM2 3 XM3 gt XM1 SIRIUS SR1 gt SR2 3 SR3 3 SR O Information displayed during reception The following information is displayed when the satellite radio cannot be received normally e When the receiver is turned on the first time or after a reset UPDATING When a channel is being tuned in no signal is yet received XM LOADING SIRIUS ACQUIRING A channel without a broadcast has been selected XM CH SIRIUS INVALID CH
51. rder 4 gt gt buttons Press to move the tracks up and down Press and hold the button for 1 second or longer to perform fast forward fast backward p11 button e Switches between playback and pause SCN button Press to perform scan play Press and hold the button for 1 second or longer to perform disc scan play RPT button e Press to perform repeat play e Press and hold the button for 1 second or longer to perform disc repeat play RDM button Press to perform random play Press and hold the button for 1 second or longer to perform disc random play O iPod BB mode 4 gt gt I buttons e Press to move the tracks up and down e Press and hold the button for 1 second or longer to perform fast forward fast backward pi button e Switches between playback and pause RPT button e Press to perform repeat play e Press and hold the button for 1 second or longer to perform all repeat play RDM button e Press to perform random play e Press and hold the button for 1 second or longer to perform all random play O TV mode BND button e Switches reception band H4 gt gt buttons Moves preset channels up and down SCN button Press to perform preset scan Press and hold the button for 2 seconds or longer to perform auto store RDM button e Press to alternate between TV and VTR DXZ675USB 9 6 OPERATIONS Note Be sure to read this chapter re
52. s the OPTION button Repeat play Play back one track repeatedly 2 Push the SEEK PANEL leftward or rightward to select RPT 3 Push the P CH button upward or downward to select A and then press the gt ENT button to perform repeat play All repeat play Repeatedly play all tracks within a selected category 2 Push the SEEK PANEL leftward or rightward to select RPT 3 Push the P CH button upward or downward to select ALL and then press the Py ENT button to perform all repeat play Random play Play all albums within a selected category in random order Corresponds to Shuffle Albums command on Pod 2 Push the SEEK PANEL leftward or rightward to select RDM 3 Push the P CH button upward or downward to select A and then press the gt ENT button to perform random play All random play Play all tracks within a selected category in random order Corresponds to Shuffle Songs command on iPod 2 Push the SEEK PANEL leftward or rightward to select RDM 3 Push the P CH button upward or downward to select ALL and then press the yy ENT button to perform all random play iPod BB Operations O To cancel the trick play 2 Push the SEEK PANEL leftward or rightward to select RPT OFF or RDM OFF 3 Press the gt ENT button Note e When the all repeat play mode is canceled playback w
53. s the battery in the direction indicated by the arrow so that it slides into the compartment Replace the cover and slide in until it clicks into place Notes Misuse may result in rupture of the battery producing leakage of fluid and resulting in personal injury or damage to surrounding materials Always follow these safety precautions e Use only the designated battery e When replacing the battery insert properly with polarities oriented correctly e Do not subject battery to heat or dispose of in fire or water Do not attempt to disassemble the battery e Dispose of used batteries properly Insertion guide DXZ675USB 7 Functions of Remote Control Unit Buttons Some buttons on the remote control unit have different functions from the corresponding buttons on the main Fo Signal transmitter unit SRC BND a gt I is 4 gt gt esol MUTE lt _ G e DISP ISR ILLOD Q CG RDM at sx Ng RET Shared modes SRC button Press the button to turn on the power Press and hold the button for 1 second or longer to turn off the power Use to alternate operation mode among the various modes A W buttons e Increases and decreases volume MUTE button Turns mute function on and off ISR button e Recalls ISR radio station stored in memory e Press and hold the button for 2 seconds or longer to store current station in ISR memory
54. sh the P CH button upward to move the next folder Push the P CH button downward to move the previous folder Folder without an MP3 WMA AAC file is not selectable 2 To select a track push the SEEK PANEL leftward or rightward CD MP3 WMA AAC Operations Top function The top function resets the CD player to the first track of the disc Press and hold the MENU button for 1 second or longer to play the first track track No 1 on the disc In case of MP3 WMA AAC the first track of a folder being played will be returned List search function 1 Press the MENU button to enter the list search mode And then the track list appears in the display 2 Push the P CH button upward or downward to select a track If you push the SEEK PANEL leftward or rightward the track list scrolls 5 lines at a time 3 Press the gt ENT button to play x In case of MP3 WMA AAC this function is performed in the current folder Note If no operation is performed for more than 10 seconds this mode can be cancel and return to the usual mode Other various play functions 1 Press the OPTION button 144 SCN OPTION ENE gt gt A v O Scan play This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc 2 Push the SEEK PANEL leftward or rightward to select SCN 3 Push the P CH button upward or downward to select A and
55. store of purchase No sound output when operating the unit with amplifiers or power antenna attached Power antenna lead is shorted to ground or excessive current is required for remote on the amplifiers or power antenna 1 Turn the unit off 2 Remove all wires attached to the power antenna lead Check each wire for a possible short to ground using an ohm meter Turn the unit back on Reconnect each amplifier remote wire to the power antenna lead one by one If the amplifiers turn off before all wires are attached use an external relay to provide remote on voltage excessive current required Nothing happens when buttons are pressed Display is not accurate The microprocessor has malfunctioned due to noise etc Turn off the power then press the RELEASE button and remove the DCP Press the reset button for about 2 seconds with a thin rod Reset button N DCP or main unit connectors are dirty Wipe the dirt off with a soft cloth moistened with cleaning alcohol No sound heard The speaker protection circuit is operating 1 Turn down sound volume Function can also be restored by turning the power off and on again Speaker volume is reduced automatically when the speaker protection circuit operates 2 If the sound is muted again consult our service department CD MP3 WMA AAC No sound heard MP3 WMA AAC files are absent in a disc Write MP3 WMA AAC files on
56. t Note The first time this unit is turned on after the wire connections are completed it must be checked what equipment is connected When the power is turned on SYSTEM CHECK appears in the display then the unit returns to the clock display mode The system check starts within the unit When the system check is complete press the SRC button again Selecting a mode 1 Press the SRC button to change the operation mode 2 Each time you press the SRC button the operation mode changes in the following order Radio gt Satellite radio CD MP3 WMA AAC USB iPod BB 3 CD changer gt DVD changer gt TV AUX 3 Radio External equipment not connected with CeNET is not displayed 1 0 DXZ675USB Basic Operations Adjusting MAGNA BASS EXTEND The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function but emphasizes the deep bass sound area to provide you with a dynamic sound 1 Press and hold the J button for 1 second or longer to turn on the MAGNA BASS EXTEND effect M B lights in the display 2 Press and hold the A button for 1 second or longer to turn off the MAGNA BASS EXTEND effect M B goes off from the display x The adjustment can only be performed when the DZE is set to DZE OFF x The factory default setting is off Mute Use this function to turn off the sound immediately 1 Press the gf button
57. the labeled side facing up The CD plays automatically after loading Notes e Never insert foreign objects into the CD SLOT e If the CD is not inserted easily there may be another CD in the mechanism or the unit may require service SMAN inuit e Discs not bearing the dise or des mark and CD ROMs cannot be played by this unit Some CDs recorded in CD R CD RW mode may not be usable Pausing play 1 Press the y ENT button to pause play PAUSE appears in the display 2 To resume CD play press the gt ENT button again Displaying CD titles This unit can display title data for CD text MP3 WMA AAC disc and user titles input with this unit 1 Each time you press the TITLE button the title display changes in the following order CD TEXT disc Title scan gt User title disc CD text title track gt CD text title disc Artist name gt Title scan O MP3 WMA AAC disc Title scan gt Track gt Folder gt Title TAG gt Album TAG 2 Artist TAG Title scan O TITLE SCAN When the display is changed to the title scan mode all titles of the track scroll automatically When AUTO SCROLL is set ON the title scan automatically When AUTO SCROLL is set OFF the title only scan one time The factory default setting is ON Refer to the subsection Setting the method for title scroll in section Operations Common to Each Mode Notes
58. to the disc properly Files are not recognized as an MP3 WMA AAC file Use MP3 WMA AAC files encoded properly File system is not correct Use ISO9660 level 1 2 or JOLIET or Romeo or APPLE ISO file system Sound skips or is noisy Compact disc is dirty Clean the compact disc with a soft cloth Compact disc is heavily scratched or warped Replace with a compact disc with no scratches Sound is cut or skipped Noise is generated or noise is mixed with sound MP3 WMA AAC files are not encoded properly Use MP3 WMA AAC files encoded properly Sound is bad directly after power is turned on Wrong filename Water droplets may form on the internal lens when the car is parked in a humid place File system is not correct Let dry for about 1 hour with the power on Use ISO9660 level 1 2 or JOLIET or Romeo or APPLE ISO file system 33 DXZ675USB Problem Cause Measure 34 No sound heard The USB memory device contains no MP3 WMA AAC files Record MP3 WMA AAC files properly to the USB memory device The files are not proper MP3 WMA AAC format Use only properly encoded MP3 WMA AAC files Files are DRM copyright protected See page 16 for details on how to cancel DRM protection Connectors are loose Disconnect the USB memory device and reconnect securely Sound is interrupted or has noise The MP3 WMA AAC files ar
59. tward to tune in the desired station Tuning There are 3 types of tuning mode available seek tuning manual tuning and preset tuning Seek tuning 1 Press the MENU button and select the desired band FM or AM 2 Tune into a station If MANU is lit in the display press and hold the MENU button for 1 second or longer MANU in the display goes off and seek tuning is now available When the SEEK PANEL is pushed rightward the station is sought in the direction of higher frequencies if the SEEK PANEL is pushed leftward the station is sought in the direction of lower frequencies Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode the frequency changes one step at a time In the quick tuning mode you can quickly tune the desired frequency 1 Press the MENU button and select the desired band FM or AM If MANU is not lit in the display press and hold the MENU button for 1 second or longer MANU is lit in the display and manual tuning is now available 2 Tune into a station 1 4 DXZ675USB O Quick tuning Push the SEEK PANEL leftward or rightward and hold in position for 1 second or longer to tune in a station O Step tuning Push the SEEK PANEL leftward or rightward to manually tune in a station Recalling a preset station A total of 24 preset positions 6 FM1 6 FM2 6 FM3 6 AM exists to store ind
60. vent scratches on the unit We recommend taking the DCP with you when leaving the car Removing the DCP 1 With the MOTORIZED FACE closed turn off the power 2 Press the RELEASE button deeply to open the DCP RELEASE button 2 Press the left side C of the DCP carefully to fit it in place A CAUTION The DCP can easily be damaged by shocks After removing it be careful not to drop it or subject it to strong shocks If the RELEASE button is pressed and the DCP is not locked into place it may fall out from vibration of the car This can da CAUTION break the DCP so after removing it either Always close the MOTORIZED FACE install it on the unit or put it in its DCP before removing the DCP case If you remove the DCP with the The connector connecting the unit and the MOTORIZED FACE open the MOTORIZED DCP is an extremely important part Be FACE closes immediately Be careful not careful not to damage it by pressing on it to get your fingers caught with fingernails screwdrivers etc Note e If the DCP is dirty wipe off the dirt with a soft dry cloth only 6 DXZ675USB 5 REMOTE CONTROL Inserting the Battery Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration Insert the battery CR2025 into the insertion S SSS guides with the printed side facing WS upwards ONE 3 Pres
61. ving to change CDs What is WMA WMA is the abbreviation of Windows Media Audio an audio file format developed by Microsoft Corporation Notes If you play a file with DRM Digital Rights Management for WMA remaining ON no audio is output The WMA indicator blinks e Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries O To disable DRM Digital Rights Management 1 When using Windows Media Player 8 click on TOOLS 3 OPTIONS COPY MUSIC tab then under COPY SETTINGS unclick the check box for PROTECT CONTENT Then reconstruct files 2 When using Windows Media Player 9 click on TOOL gt OPTIONS MUSIC RECORD tab then under Recording settings unclick the Check box for RECORD PROTECTED MUSIC Then reconstruct files Personally constructed WMA files are used at your own responsibility What is AAC e AAC is an acronym for Advanced Audio Coding and refers to the audio compression method used with video compression standards MPEG 2 and MPEG 4 AAC files composed with the following conditions can be played AAC files encoded with iTunes iTunes Ver 7 0 or earlier File extension m4a M4A 1 6 DXZ675USB e Tracks purchased at an Tunes Music store and copyright protected files cannot be played When playing AAC files that include image data additional time may be require

Download Pdf Manuals

Related Search

Related Contents

TKG DG 1000  ENGLISH BIOHIT Celiac quick test SUOMI  Cámara por Infrarrojos NEI-30 |VEI-30  Annexe 2 - format : PDF  Thor - Esab  Huawei MediaPad X1 16GB 3G 4G Black  8_PAGES_GARDE_ENFANTS_Mise en page 1  Trim Cylinders - Boating With TR!  Manuel d`installation  Aufstell- und Bedienungsanleitung DELTA/ FORMIA/ NOVIA  

Copyright © All rights reserved. Failed to retrieve file