Cisco Systems OL-6380-01 User's Manual
Contents
1. System Location Location of the switch or router System Contact Name of the person who is the contact for this switch router System Description Multiline text description of the switch router This attribute is read only Cisco Contact Information Details on how to contact Cisco Systems This attribute is read only and has no value in a pure CatOS installation Cisco Catalyst Switch Manager User Guide OL 6380 01 Chapter5 Network Element Management Network Element Management Window W SNMP Access Tab The following areas are available on the SNMP Access tab of the Network Element Management window e IOS LINUX SNMP e Cat OS SNMP 10S LINUX SNMP The IOS LINUX SNMP area provides e SNMP v2c Read Community The v2c community string used to read data from the agent e SNMP v2c Write Community The v2c community string used to write data from the agent e Last Authentication Failure Address The IP address of the last host that caused an SNMP authentication failure to occur This has no value in a pure CatOS installation The attributes within this area are inactive for Catalyst OS devices Cat OS SNMP The Cat OS SNMP area provides e Same As IOS If enabled the IOS SNMP version and communities will be used to access the SNMP Agent on the Supervisor module in Hybrid OS configurations If this attribute is set to No the SNMP Read Community and SNMP Write Community fields in t2. 906 006 524b 6a0a static No Router 710 006 524b 6a0a static No Router SS 006 524b 6a0a static No Router 999 006 524b 6a0a static No Router 201 006 524b 6a0a static No Router If a MAC address is not found a message displays in the table area of the report indicating no results found I OL 6380 01 Cisco Catalyst Switch Manager User Guide J Chapter5 Network Element Management HMAC Address Query Window Cisco Catalyst Switch Manager User Guide u OL 6380 01
3. The Chassis Layer2 Layer3 Management window includes the following areas e Layer 2 Configuration e Layer 3 Configuration mi Cisco Catalyst Switch Manager User Guide OL 6380 01 _ Chapter 5 Network Element Management Network Element Management Window i Layer 2 Configuration The Layer 2 Configuration area provides amp CDP Displays the Cisco Discovery Protocol CDP global status on the network element enabled or disabled UDLP Displays the UniDirectional Link Detection Protocol UDLP global status on the network element enabled aggressive or disabled The aggressive option is not applicable for CatOS 802 1x Displays the 802 1x Port Based Authentication global status on the network element enabled or disabled Note Dot1x cannot be enabled if dynamic mode is enabled on one or more ports Layer 3 Configuration The Layer 3 Configuration area provides IP CEF Displays the status of the IP CEF routing on the network element enabled or disabled This feature cannot be disabled on Cisco 3950 4000 4500 6000 6500 and 7600 series devices IP Multicast Displays the status of the IP Multicast routing on the network element enabled or disabled Network Element Management Window The Network Element Management window provides monitoring and management information for properties related to the These properties include the Telnet and Enable passwords global performance
4. logging and SNMP properties for the entire switch I OL 6380 01 Cisco Catalyst Switch Manager User Guide n Chapter5 Network Element Management HI Network Element Management Window To launch the Network Element Management window either e Right click a Site object within the Network or Physical containment views then choose CSM 7600 Manager gt NE Config Mgmt Or e Right click a Network Element object within the Network or Physical containment views then choose NE Config Mgmt Figure 5 2 is an example of the Network Element Management window Figure 5 2 Network Element Management Window Network Element Management File Edit Options Window Navigation Actions Help lt 4 5 gt i ase BMY 2 9 Network Element Configuration System Information SNMP Access SNMP Trap Device Management Additional Notes NE3550 NE6500 System NE6509 NE7600 System Name ems2970a IP Address Supervisor 172 18 175 92 MSFC Not Applicable Operating System Expected OS Type Active OS Type Native IOS 10S Session Cat OS Session Same As 1057 Username Username Password Password EXEC Password wee EXEC Password Reset System Actions Last Restart Reason power on Commission Decommission Reset Status NetworkElement normal OsBroker nativeios Dynamic updates are enabled s J I3 oO K Cisco Catalyst Switch Manager User Guide a D OL 6380 01 Chapter 5 Network Element Management Network Element Mana
5. CHAPTER 5 Network Element Management This chapter describes how to manage chassis using the Cisco Catalyst Switch Manager and consists of the following primary sections e Chassis Layer2 Layer3 Management Window e Network Element Management Window e MAC Address Query Window Chassis Layer2 Layer3 Management Window The Chassis Layer2 Layer3 Management window provides capabilities to enable or disable Cisco discovery unidirectional LAN and IP routing protocols on the network element To launch the Chassis Layer2 Layer3 Management window either e Right click a Site object within the Network or Physical containment views then choose CSM 7600 Manager gt Chassis Mgmt IP Or e Right click a Network Element object within the Network or Physical containment views then choose Chassis Mgmt IP Figure 5 1 is an example of the Chassis Layer2 Layer3 Management window Cisco Catalyst Switch Manager User Guide oL 6380 01 PEN Chapter5 Network Element Management W Chassis Layer2 Layer3 Management Window Figure 5 1 Chassis Layer2 Layer3 Management Window i l Chassis Layer2 Layer3 Management File Edit Options Window ae SY Network Element Layer 2 Configuration CDP UDLD NE7600 602 1x Layer 3 Configuration IP CEF IP Multicast Status NetworkElement normal OsBroker nativeios Help disabled Not Applicable disabled Not Applicable Not Applicable enabled 111453
6. ager User Guide n Chapter5 Network Element Management HT Network Element Management Window The SNMP Trap Client Configure window provides the following SNMP Trap Client Address The IP address to which SNMP traps are sent SNMP Trap Client Community String The community string used within the SNMP trap SNMP Version The SNMP version running on the device snmpvlc or snmpv2 Add Client Adds a client to the client list Remove Client Removes the client from the client list Note An error is reported if a nonexistent client is removed or if an existing client is added Device Management Tab The Device Management tab of the Network Element Management window consists of a single area Write Config to Flash The Write Config to Flash area provides a single button Write Mem It changes to the running config are saved to the startup config In the future when the startup config is accessed it will contain the most recent running config written to memory Additional Notes Tab The Additional Notes tab of the Network Element Management window contains the Notes area which is a text box that allows you to type in additional notes For example this information can include text indicating why global performance logging is turned on Cisco Catalyst Switch Manager User Guide OL 6380 01 Chapter 5 Network Element Management MAC Address Query Window W MAC Address Query Window a
7. gement Window W The Network Element object list left hand side of the window allows multiple objects to be selected so that configuration changes can be applied to multiple Network Element objects at the same time The following tabs are available on the Network Element Management window Configuration Tab System Information Tab SNMP Access Tab SNMP Trap Tab Device Management Tab Additional Notes Tab Configuration Tab ISystem The following areas are available on the Configuration tab of the Network Element Management window ISystem IP Address Operating System IOS Session Cat OS Session Reset System Actions The System area provides the System Name This is a Fully qualified name of the switch or router I OL 6380 01 Cisco Catalyst Switch Manager User Guide n Chapter5 Network Element Management HI Network Element Management Window IP Address The IP Address area provides e Supervisor IP address used to access the switch or router e MSFC IP address of the management agent on the MSFC daughter card only in Hybrid OS Operating System The Operating System area provides e Expected OS Type This attribute is used by a client that initiates a deployment context to indicate the type of operating system expected on a managed device This can only be changed when the device is decommissioned Values are Catalyst OS Only Hybrid OS Native OS e Active OS Type The operating s
8. he Cat OS SNMP area become active e SNMP v2c Read Community The v2c community string used to read data from the agent e SNMP v2c Write Community The v2c community string used to write data to the agent The attributes within this area are inactive for Catalyst OS devices Cisco Catalyst Switch Manager User Guide oL 6380 01 on Chapter5 Network Element Management HI Network Element Management Window SNMP Trap Tab The following areas are available on the Configuration tab of the Network Element Management window e Trap Generation e SNMP Trap Trap Generation The Trap Generation area provides e SNMP Trap Status Indicates the level at which SNMP traps are enabled The level is one of these values disabled layer2Only SNMP traps are enabled on the datalink layer only layer30nly SNMP traps are enabled on the network layer only layer2And3 SNMfP traps are enabled on the datalink and network layers e Enable Enables all SNMP trap generation from the switch or router e Disable Disables all SNMP trap generation from the switch or router SNMP Trap The SNMP Trap area provides e Trap Client IP Table IP address table to which SNMP traps generated by the switch or router are sent Trap Client IP IP address to which SNMP traps are sent Client Community Community string used within the SNMP trap SNMP Version Version of the SNMP protocol used by Cisco EMF to comm
9. mp MAC Addresses are used within a network to identify specific ports on an interface Other devices in the network use MAC addresses to locate ports in order to create and update routing tables and data structures The MAC Address Query window allows you to query a Network Element for a MAC address The query results of a Network Element based on a MAC address display in an Action Report window indicating data similar to a show mac address table address xXXXxX XXXX XXXX command Note MAC address queries may require extensive lengths of time to complete depending on the inventory of the Network Element object being queried To launch the MAC Address Query window either e Right click a Site object within the Network or Physical containment views then choose CSM 7600 Manager gt NE MAC Address Query Or e Right click a Network Element object within the Network or Physical containment views then choose NE MAC Address Query Figure 5 3 is an example of the MAC Address Query window I OL 6380 01 Cisco Catalyst Switch Manager User Guide 7 Chapter5 Network Element Management HMAC Address Query Window Figure 5 4 MAC Address Query Window MAC Address Query Fle Edit Options Window Navigation Actions Help ase BBY 2 9 Network Element NE7600 MAC Address Query MAC Address Query Status NetworkElement normal od i fe The following areas are available on the MAC Address Query wind
10. no value in a pure CatOS installation Reset Button used to reset the switch or router This action power cycles the switch or router You are prompted to confirm whether you really want to reset the switch or router Only users with administrative privileges can use the Reset button Any changes to the running configuration are saved when you reset the switch or router is reset using the Reset button I OL 6380 01 Cisco Catalyst Switch Manager User Guide s Launch Interne Chapter5 Network Element Management HT Network Element Management Window Actions The Actions area provides Commission Commissions the object manually You can commission the object only if the object is in a decommissioned state Clicking this button forces a subchassis discovery to be executed and propagates the commissioned status to all subobjects Decommission Decommissions the object manually and propagates the decommissioned status to all subobjects In the decommissioned state the properties of the object are not monitored As a result data displayed in the configuration window may not be current System Information Tab The System Information tab of the Network Element Management window provides the following information System Up Time Duration of time indicating how long the system has been running This attribute is read only System Services List of OSI layers supported by the switch or router This attribute is read only
11. ow e Network Element e MAC Address Query Network Element The Network Element area consists of a listing of all network elements available via the selected object Cisco Catalyst Switch Manager User Guide m OL 6380 01 _ Chapter 5 Network Element Management MAC Address Query The MAC Address Query area provides MAC Address Query Window Wi MAC Address Indicates the MAC address to be queried The MAC address should be entered in xxxx xxxx xxxx format where x may be 1 through 9 A through Z or a through z Query Searches the selected Network Element for the entered MAC address To query a MAC address for a Network Element enter the MAC address in the corresponding field then click Query An Action Report window displays indicating the results An example of a report follows Chassis ems6513a show mac address table address 0006 524B 6A0A Codes primary entry vlan mac address type learn ports Supervisor Edar 006 524b 6a0a static No Router 006 524b 6a0a static No Router 613 006 524b 6a0a static No Router 333 006 524b 6a0a static No Router 652 006 524b 6a0a static No Router 701 006 524b 6a0a static No Router 700 006 524b 6a0a static No Router 678 006 524b 6a0a static No Router 677 006 524b 6a0a static No Router 908 006 524b 6a0a static No Router 904 006 524b 6a0a static No Router 907 006 524b 6a0a static No Router
12. unicate with the managed device This field has the following value snmpv2c Notification Layer Indicates the level at which the SNMP trap client is defined The level is one of these values Cisco Catalyst Switch Manager User Guide u OL 6380 01 Chapter 5 Network Element Management Network Element Management Window W e layer2Only SNMP trap client is defined on the datalink layer only e layer3Only SNMP trap client is defined on the network layer only e layer2And3 SNMfP trap client is defined on the datalink and network layers The IP address of the Cisco EMF server host should be in this list at all times If it is not then Cisco EMF will not receive any traps from the switch or router which might result in an event being reported in an untimely fashion or an event being missed e Configure Launches the Chassis Management Configure SNMP Trap Client window for modifying the Trap Client list Figure 5 3 Chassis Management Configure SNMP Trap Client Window Network Element cyber3550a ems2950e ems3550c ems6006a ems6506a ems6509neb ems6513a ems7609a jap6509a nsp Status NetworkElement normal OsBroker nativeios gt enabled Chassis Management Configure SNMP Trap Client a aj File Edit Options Window Navigation Actions as Egy SNMP Trap Client Address SNMP Trap Client Community Add Client Remove Client Help 73328 I OL 6380 01 Cisco Catalyst Switch Man
13. ystem type detected on the managed device 10S Session amp Note The attributes within this area are inactive for Catalyst OS devices The IOS Session area provides e Username User name to establish an IOS management session with the device over telnet e Password Password to establish an IOS management session with the device over telnet e EXEC Password Password to enter privileged EXEC mode Cisco Catalyst Switch Manager User Guide OL 6380 01 Chapter5 Network Element Management Cat OS Session Network Element Management Window i The Cat OS Session area provides Same As IOS TIf enabled the IOS telnet username and password are automatically used to connect to the Supervisor module over CatOS in Hybrid OS configurations If this attribute is set to No the Username Password and EXEC Password fields in the Cat OS Session area become active Username User name to establish a CatOS management session with the device over telnet Password Password to establish a CatOS management session with the device over telnet EXEC Password Password to enter privileged EXEC mode in a CatOS session If the above passwords are incorrect some window values may report as ERROR The attributes within this area are inactive for IOS devices Reset System The Reset System area provides Last Restart Reason Text message displaying why the switch or router was restarted This has
Download Pdf Manuals
Related Search