CHIEF MSB-6098 MSB-6392 User's Manual
Contents
1. INSTALLATION INSTRUCTIONS MSB 6098 amp 6392 DISPLAY MOUNTING BRACKET Prior to assembly unpack carton completely and verify contents If you are missing any of the following components please contact Customer Service at 1 800 382 6480 b o a Oa ers ee By eee 0006 5 o HpHpHppHp A J J a j Fi 1 l 1 Interface Bracket PE 4 Mounting Button Tapped 4 10 24 x 5 Button Head Cap Screw 4 M5 x 20 Phillips Head Cap Screw 4 50 x 194 x 375 Nylon Spacer 1 1 8 Allen Key BEFORE PROCEEDING READ INSTALLATION INSTRUCTIONS COMPLETELY CAUTION DISPLAYS ARE EXTREMELY FRAGILE ALL COMPONENTS MUST BE SECURELY FASTENED TO A STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4 TIMES W A RNING THE COMBINED WEIGHT OF ALL COMPONENTS PLUS THE EQUIPMENT BEING MOUNTED IF IT CANNOT SUPPORT THIS WEIGHT THE STRUCTURE MUST BE REINFORCED THE MAXIMUM WEIGHT TO BE INSTALLED ON THE INTERFACE IS 125 POUNDS 79 38 KG NOTE If installing screen on a Chief J series wall mount proceed to Step 3 J Series VESA Interface Installation 1 Chief Q latch Button Installation Used with MSR MTR MWH MWR MCS and MCD mounts Using a 10 24 button head cap screw inserted from back side of bracket secure mounting button with chamfered hole of mounting button larger surface facing bracket bracket four places see Figure 2 amp Figure3 2 Proceed to Step 4 Bracket Installa2. tion 10 24 BUTTON HEAD CAP SCREW ATTACH MOUNTING BUTTONS USING THESE HOLES pais MOUNTING BUTTON Figure 2 Figure 3 CHIEF MANUFACTURING INC 8840 000022 REV A wm 1 800 582 6480 952 894 6280 FAX 952 894 6918 2005 Chief Manufacturing NF 8401 EAGLE CREEK PKWY STE 700 www chiefmfg com Ideas Supporting Ideas SAVAGE MINNESOTA 55378 USA 08 05 3 J Series VESA Interface Installation Using the 10 24 button head cap screws along with the 10 24 Nylock nuts provided with J Series mount attach VESA interface from J Series mount to MSB bracket see Figure 4 amp Figure 5 10 24 NWYLOCK NUT FROMA J SERIES MOUNT ATTACH VESA ADAPTER PLATE TO BRACKET USING THESE HOLES cris AEn 2 J On YESA ADAPTER PLATE FROM J SERIES MOUNT 10 24 BUTTON HEAD CAP SCREW 9 4 a Fa Figure 4 Figure 5 4 Bracket Installation Attach bracket to back of display using the M5 screws and nylon spacers see Figure 6 amp Figure 7 for MSB 6098 and Figure 8 amp Figure 9 for MSB 6392 Do not over tighten screws 5 Follow the Chief mount instruction manual for screen installation MSB 6098 ATTACH BRACKET TO BACK OF DISPLAY USING THESE HOLES An Figure 6 Figure 7 MSB 6392 ATTACH BRACKET TO BACK OF DISPLAY USING THESE HOLES NYLON SPACER Figure 8 Figure 9
Download Pdf Manuals
Related Search