Home
Carrier RAV-AT/CT Owner's Manual
Contents
1. E Changing the temperature D 1 Pushthe v v button to adjust 3 the temperature gt Pushthe A button to raise the temperature setting push the W v button to lower it Refer to Set temp range limit for the temperature range available page 29 The temperature cannot be adjusted when Fan is selected as the operation mode Lite Vision plus Remote Controller B Monitor screen Check the current usage status TOSHIBA Room A X Cool Mode Fan speed 12 00 7 o 5 Vv Monitor 1 Set temp 27C 2 Indoor temp 27 C 3 Outdoor temp 35 C 4 Filter remaining hour 2500 5 Total running hour 60000 E Return NOTE Total running hour The operating time is recorded on the remote controller Owner s Manual pm ym cur 1 Push ag MONITOR button The monitor screen appears 2 Push gy CANCEL button to return 1 Displays the set temperature 2 Displays the temperature measured by the indoor temperature sensor of the indoor unit If the sensor is set to that of the remote controller the temperature measured by the remote controller sensor is displayed 3 Displays the temperature around the vent of the outdoor unit 4 Displays the remaining time until the filter sign lights up 5 Displays the accumulated operating time The time is not recorded during se
2. 32 Lite Vision plus Remote Controller Owner s Manual Bi Backlight Turn on or off the backlight of the LCD Initial setting 1 2 1 Pushthe w V button to select 1 Clock 4 Backlight on the Initial setting screen Z Name of roam then push the Gua Set F2 3 Screen contrast butt mee 5 ey lock 2 Pushthe A N wv v button to select EB Reun ecco NA E Set 3 Push the E MENU button When ON is selected the back light is turned Backlight on during operating with the remote controller ON When OFF is selected the back light is not turned on OFF NOTE EB Reus Fix Vd light of the LCD is turned on as a factory i E Key lock Select whether to lock unlock ON OFF ME MODE F1 and FAN SPEED F2 m Initial setting 1 2 1 Pushthe w v button to select 2 Name of room 5 Key lock on the Initial setting screen 3 Screen contrast then push the gaa Set F2 4 Backlight button EB Return 2 Push the A v v button to select nv Set a key to lock unlock Key lock 1 2 NORE 3 Push the que lt e F1 button Lock Unlock to select Lock or Qua Ea e F Set temp F2 button to select Unlock Lock Unlock 4 Push the EE MENU button EB Return Fix When Lock is selected the key cannot be used during key lock When Unlock is selected the key can be used Key lock 2 2 ev
3. on the upper left of the screen unless All is y selected for the unit selection N All is not available for some settings EB Return Louver 3 38 Lite Vision plus Remote Controller s Owner s Manual 6 Maintenance Turn off the power before maintenance N CAUTION Do not operate the unit with wet hands Doing so may result in electric shocks B Daily maintenance Wipe the remote controller with a dry soft cloth Using water to clean the remote controller may result in a malfunction B Cleaning the air filter Room A 12 00 Clean the air filter when p filter sign appears SAO Ei on the detailed display page 24 E Ea is not displayed in the normal display C mode Clogged air filter reduces the cooling or heating xt Cool performance 39 Lite Vision plus Remote Controller 7 Troubleshooting Owner s Manual SSE ED E Confirmation and check oo Check code A Code P10 Unit 2 2 NJ lal i Ael s0 Unit number of the malfunctioning indoor unit 24 C tECool Check Z Check Code P10 Unit 2 2 EB Return 40 When an error has occurred in the air conditioner the check code and the unit number of the indoor unit appear on the display of the remote controller The check code appears only while the unit is running Push the MONI
4. OFF 2 Fan speed lt L gt 3 Mode 4 24H ventilation off E Return Cd Set 36 Lite Vision plus Remote Controller p Owner s Manual NOTE Impossible appears on the display when no ventilation unit is connected or the individual operation for the ventilation unit is not activated 2 Fan speed or 3 Mode 4 24H ventilation off is available only for the air conditioning system using the Toshiba Air to Air Heat Exchanger VN M HE series Refer to the Owner s Manual supplied with the Air to Air Heat Exchanger for details 4 appears on the detailed display during the ventilation operation when the ventilation unit other than the Toshiba Air to Air Heat Exchanger VN M HE series is used and the individual operation for the ventilation unit is activated 12 Information E Model information Shows the model names and serial numbers 1 Pushthe A AMI v v button to select 2 Service information 12 Information on the menu screen then push the ENNKE EENB Set F2 button 2 Pushthe v v button to select 1 Model information then push the E Return C Set E Set F F2 button Model information Indoor No 00129999 Name RAV SM1104UT E Outdoor No 00129999 Name RAV SM1104AT8 E E Return B Service information Check the contact number for service Information 1 Pushthe w v button to select 1 Model information 2 Service in
5. To stop the louver swing the display after the louver swing is stopped individual louer 1 Push the memme Swing OFF F2 7 button on the 2 Individual louver screen 4 2 mI go 2 Push the a CANCEL button gt The screen returns to the menu screen EB Return Louver NOTE No function appears on the display for the models not equipped with the individual louver setting Pushing vv Vv while the louver is swinging stops swinging and sets the louver in the position 1 Refer to Information Group control page 38 aa appears on the display when the Louver lock function is used Individual louver setting is not available for the louver set to be locked page 16 414 Lite Vision plus Remote Controller Owner s Manual 3 Louver setting B Swing type Select the louver swing type from the standard swing dual swing or cyclic swing Carry out the setting operation while the indoor unit is stopped Turn off the air conditioning unit before starting the setting operation Before setting 1 Pushthe v v button to select Louver setting 3 Louver setting on the menu screen then push the EEE Set F F2 button 2 Louver lock TOSHIBA 2 Pushthe v Vv button to select 1 Swing type then push the Gia Set em Set E F2 button EJ e E 3 Push the v v button on the F Swing type s
6. F F2 button to set the value gt The Energy saving ratio can be set within the range from 50 to 100 by 1 The lower the value is set the higher the power saving effect becomes Push the EE MENU button X Setting appears on the screen then the Screen returns to the Energy saving operation Screen Adjust the clock before setting the Energy saving schedule operation page 31 The remote controller may not be used for setting the Energy saving operation depending on the settings of the central control remote controller or the outdoor unit The Energy saving schedule operation is not available when the clock display is blinking the clock has not been adjusted 27 Lite Vision plus Remote Controller Energy saving schedule Pq Energy saving operation 1 Energy saving operation ON OFF 2 Energy saving ratio 3 Energy saving schedule EB Return Fix Cd Set Energy saving schedule 1mm 9 2 95 3 4 EB Return EE Fix Energy saving schedule 1 08 00 12 00 80 2 12 00 13 00 50 3 13 00 17 00 80 4 19 00 08 00 BJA EB Return Fix NOTE 1 Owner s Manual guru Pushthe v v button to select 3 Energy saving schedule on the Energy saving operation screen then push the ED Set F F2 button gt The Clock setting screen appears if the clock has not been adjusted
7. KE MENU button Pushthe v v button to select the day to set then push the amm F1 button Pushthe w v button to select a ON OFF gt Select ON to change the operation start time and the set temperature settings gt Select OFF to change the operation stop time setting indicates that the item has not been set Push amm C F2 to select time or temperature When is displayed time or temperature cannot be selected for that item Pushthe v v button to set time or temperature Owner s Manual Lite Vision plus Remote Controller 2 Schedule timer 3 3 TEES imensa 8 Push the mm F1 button to ue 7 program the next running pattern 5 ON 13 00 25 C gt Up to 8 different running patterns per day can 6 OFF 17 00 C 7 ON 22 05 25 C be programmed 8 OFF 23 C O Push the gg MENU button E Return E Fix gt The screen returns to the day selection screen 1 Schedule timer 10Push the A Vv button to select the day to set for programming the other Schedule timer confirm days Repeat the procedure from step 4 to 9 to program the running patterns for each day 2 E Retum 1 1Push the ggg MENU button Yes gt Push the Gem Yes F1 button to confirm the programmed schedule gt Push the Glee No z F2 button to return to the setting screen To del
8. Set 3 Push the EEE MENU button When ON is selected the air conditioner starts stops running when the ON OFF button is pressed and hold 4 seconds When OFF is selected the air conditioner starts stops running when the ON OFF button is pressed Press amp hold 4sec ON OFF EB Return Fix 35 Lite Vision plus Remote Controller Owner s Manual 11 Ventilation Only for models equipped with the function B Ventilation Set for the ventilation operation linked to the air conditioner TOSHIBA 1 Select 11 Ventilation on the menu screen Ventilation then push the ENNE WENB Set F2 2 Fan speed lt L gt zn de 2 Hie el w v button to select Set 3 Push the Guam Set C F2 button B i P gt Item Function 1 ON OFF The run and stop operation of ventilation 2 Fan speed Setting of the fan speed 3 Mode Setting of the ventilation mode 4 24H ventilation off Setting of 24H ventilation operation stop time Operation Ventilation 1 Pushthe A v button to select ON 41 ON OFF on the Ventilation screen m then push the qu Set F2 button Pushthe w v button to select ON or OFF EB Return Fix l Push the EE MENU button Ventilation gt The screen returns to the Ventilation setting 1 0N OFF Screen
9. getting the control unit wet Failure to heed this warning may result in electric shocks a fire and or trouble If trouble such as the smell of burning has occurred stop operation and turn off the main power switch Allowing operation to continue while the trouble has not been remedied may cause electric shocks a fire and or trouble Consult your dealer Relocation Do notundertake any repair work yourself Under no circumstances must you attempt to do any repair work yourself Instead consult your dealer or a contractor with specialized experience Electric shocks and or a fire may result if you attempt to do repair work yourself and this work ends up not being carried out perfectly Consult your dealer when the control unit is to be relocated and re installed Lite Vision plus Remote Controller i Owner s Manual NCAUTION Installation Do not install the remote controller unit where there are high levels of moisture oils grease or vibration Failure to heed this caution may cause trouble Do not install the remote controller unit direct sunlight or near a heat source Failure to heed this caution may cause malfunctioning Do not install the remote controller unit where there are sources of electro magnetic noise Failure to heed this caution may cause unintended operation Operation Do not drop the product or subject it to strong impact Failure to heed this caution may cause malfunctioning 2 Befor
10. pretia 4 Energy saving operation on the ASMA Nelo Energy saving screen 2 Energy saving ratio 3 Energy saving schedule 2 Tostart the Energy saving operation After setting 2 Energy saving ratio and 3 Energy saving schedule push the D lt e E F1 button to select ON then push the EE MENU button To stop the save operation Push the ED e F F2 button to select OFF then push the fas MENU button 26 Lite Vision plus Remote Controller Energy saving ratio Carry out the setting operation while the indoor unit is stopped Turn off the air conditioning unit before starting the setting operation Energy saving operation 1 Energy saving operation ON OFF 2 Energy saving ratio 3 Energy saving schedule EB Return Fix a Set Energy saving ratio Energy saving ratio 75 EB Return Fix NOTE Cooling heating performance may be reduced a little because its power is saved during the Energy saving operation fi appears on the detailed display when the Energy saving operation is activated The Energy saving operation cannot be set on the Follower remote controller when the dual remote controller system is used Owner s Manual prm E e m Pushthe v v button to select 2 Energy saving ratio on the Energy saving screen then push the Gasca Set F2 button Push the HEE F1 B
11. 1 hour 1 hour 1 hour or more 2 hours Push the ON OFF button twice to stop the self clean operation forcibly Self clean appears on the screen while the self clean operation is in progress The LED of the ON OFF button turns off Refer also to the Owner s Manual supplied with the indoor unit about the self clean operation E Menu operation Refer to the next pages for details about the menu screen TORIA 1 Push the amp amp I MENU button Menu 1 3 2 Push the wv v button to select ay an item oe gt The selected item is highlighted 3 i C 3 Set Push the Set F2 button gt The setting screen appears 4 To undo Push the E3 CANCEL button to return y gt The screen returns to the previous screen The menu screen returns to the normal detailed display if no operation is performed for 60 seconds Lite Vision plus Remote Controller Owner s Manual 5 Menu items MENU 1 Wind direction 2 Individual louver 3 Louver setting Swing type So eem 4 Off reminder timer gg a Jj p stewed 5 Schedule timer pH c Geesewe p LU NN A eem 6 Night operation j 7 Filter sign reset 8 Auto grille 9 Energy saving Energy saving operation Set temp range limit Return back r Lite Vision plus Remote Controller Owner s Manual 10 Initial setting Clock Name of ro
12. C 29 0 C E Return E Fix When an error occurs during setting Error appears on the display when the EE MENU button is pushed under either condition 1 the upper limit value falls below the lower limit 2 the lower limit value exceeds the upper limit Push the E CANCEL button to erase the error message or wait for 10 seconds until the message disappears The screen returns to the Set temp range limit screen Priority for the set temp range limit function Setthe same settings for the set temp range limit on each remote controller when the dual remote controller system is used NOTE The operation at the temperature beyond the temperature range may be performed in the following cases 1 In case that the different values of temperature are set on each remote controller when the dual remote controller System is used 2 In case that the temperature beyond the temperature range is set on the central control remote controller 29 Lite Vision plus Remote Controller Owner s Manual B Return back The temperature setting returns back to the specified temperature automatically if the temperature has been changed on the remote controller The time and temperature to return can be set Energy saving 1 Pushthe w v button to select 1 Energy saving operation 3 Return back on the Energy saving Ja ONT screen then push the GEES Set 2 Set temp range limit F2 button OFF 2 apii w
13. Push the mmm Day F1 button to zz Ea u s select the day then push the Set F2 button to set Holiday setting gt Push the Gi Set F2 button so that e is displayed on the day when the Non Wed Thu Fri S Schedule timer is not used 4 Push the gay MENU button gt The screen returns to the Schedule timer E Return E Fix screen Pay NOTE Operations other than the Schedule timer such as operations on the remote controller or using the central control are available on the days set as Holiday Push the IE CANCEL button to stop the setting procedure No setting has been made and the screen returns to the Schedule timer screen 22 Lite Vision plus Remote Controller 6 Onl Owner s Manual Night operation ly for models equipped with the function Set the operation time that suppressing the operation sound of the outdoor unit is preferable such as nighttime 1 Pushthe v button to select Night operation 6 Night operation on the menu screen then push the Emma Set F2 ON OFF 2 Start ime 22 00 button 3 End time 10 00 2 Pushthe wv v button to select a ee ee ON or OFF EJ 3 Push the Quer e F1 ED e F2 button to select B o ON or OFF Select ON when the function is used 5 4 Push the gay MENU button gt Pushthe A A ww V button to s
14. TOR button or E3 CANCEL button to display the check information screen While the check information screen appears Push the Giese Contact F F1 button to display the contact number for service Push the aime Information E F2 button to display the model name and serial number of the unit
15. TOSHIBA Leading Innovation gt gt gt Lite Vision plus Remote Controller Owner s Manual Model name RBC AMS51E ES Read this manual before using the RBC AMS51E ES remote controller Refer to the Installation Manual supplied with the indoor unit for any installation instructions other than operations of the remote controller HFC Owner s Manual 1 ma Manuel du propri taire 41 Bedienungsanleitung Manual del propietario Handleiding 161 REGLE Manual do Proprietario 201 Bays Lite Vision plus Remote Controller Owner s Manual Contents 1 Precautions for Safety 0 0 ccc eee eens 2 2 Befor Use enia dh otek ea Stew handde dent nt Shee RENE P ERR AER 3 3 Part Names and Functions 0 0 cece eee hn 4 4 ODe Fati li exis tans fe caseon esas se yepayieevn a ens eneve E yeaiela quts macs uae Roa S E deu RED RN EU RUE tec 6 Running operation 0 cece eee 3 hh 6 Changing the fan mode 00 cece cece 6 Changing the temperature 0 0 cece eee ees 6 Monitorscre n i222 RR IRE boa eee Shed cea E eee ewes RE 7 Menu operation icio eR hea a dew a eee dee Ee ee eee 8 5 Menu OMS 2 20 DER 9 1 Wind Direction c ss cccceieee ee ku ike een eee sete ef ege xetggEs 11 2 ndividual louver ercer rror sees RIEIXG RR xar IR ee wee eee Eie iie x 13 3 Louversetting iciecelo cr lr RR ERR E Re Rx RETE RR 15 4 Off reminder Mer eii coraa sede de
16. alt l v v button to select J Set i 3 Push the que lt lt F1 button Return back to select ON gt Select OFF when not using the function ON OFF 4 Pushthe A v Vv button to select 2 Return time 60min 3 Return temp Cool 28 C 2 Return time then push the qua 4 Return temp Heat 20 C F1 ques F2 button to set E Return E Fix the time gt The time can be set within the range from 10 minutes to 120 minutes at 10 minute intervals Return back 5 Pushthe wv vV to select 3 1 Relum back ies Return temp cooling or 4 Return temp PM Med MT S REE tare cool VET F1 quem F2 button to set the 4 Return temp Heat 20 C temperature 6 Push the EEE MENU button gt The screen returns to the Energy saving screen Return back 1 Return back ON OFF 2 Return time 60min 4 Return temp Heat 20 C EB Return EE Fix recs Return back 1 Return back ON OFF 2 Return time 60min 3 Return temp Cool 28 C 4 Return temp Heat 20 C EB Return Fix a Es NOTE The Return back function cannot be set on the Follower remote controller in the dual remote controller system 30 Lite Vision plus Remote Controller 10 Initial setting Set the initial setting of the remote controller Owner s Manual TOSHIBA Initial setting 1 2 1 Clock 2 Name of room 3 Screen co
17. auto grille starts lifting lowering or stops Refer to the Owner s Manual supplied with the auto grille panel or auto grille kit for details about the auto grille function Refer to Information for the Group control page 38 225 Lite Vision plus Remote Controller Owner s Manual 9 Energy saving Set for the energy saving operation Energy saving operation Set temp range limit and Return back 1 Pushthe wv v button to select Energy saving 9 Energy saving on the menu screen then push the meme Set F2 button ON TOSHIBA 2 Set temp range limit Sesto pagk S 2 Pushthe v v button to select E Retum the item to set Set 3 Push the mmu Set F2 button a 3 amp o 5 V Item Function 1 Energy saving operation Perform the power saving operation of the air conditioner 2 Set temp range limit Set the temperature range limit of the remote controller operation 3 Return back Set the function that changes the temperature back to the specified temperature automatically if the temperature has been changed on the remote controller N CAUTION Refer to the Owner s Manual supplied with the air conditioner about Energy saving operation E Energy saving operation Set for the power saving operation of the air conditioner Energy saving operation 1 Pushthe wv vV button to select ENERGY seving
18. ay mode to tell the time for cleaning the filter Resetthe filter sign after cleaning the filter Refer to the Owner s Manual supplied with the E UU indoor unit about how to clean the filter C X Cool oom Room A Room A 12 00 Filter check is displayed on the screen if you start running the air conditioner when gi filter sign Ed appears on the detailed display Push one of the operation buttons to erase the message or wait for Filter check more than 5 seconds until the message disappears O EE When the filter sign is displayed on the screen To reset the filter sign Filter sign reset 1 Push the LA v vV button to select Remaing hour to clean the filter 7 Filter sign reset on the menu screen then push the EEEE Set F F2 button Clean the air filter E Return a When the filter sign is not displayed on the screen To check the remaining time for filter cleaning 2 Push the ame Reset F2 button Filter sign reset 1 Push the A VY v button to select Remaing hour to clean the filter 7 Filter sign reset on the menu screen then push the EEEE Set F2 button 456hour 2 Push the EJ CANCEL button neum n gt The screen returns to the menu screen NOTE Clean the filter appears on the display when there is no remaining time for filter cleaning H filter sig
19. bodily injury 2 or damage 3 to property if the product is handled improperly 1 Serious bodily harm indicates loss of eyesight injury burns electric shock bone fracture poisoning and other injuries which leave aftereffect and require hospitalization or long term treatment as an outpatient 2 Bodily injury indicates injury burns electric shock and other injuries which do not require hospitalization or long term treatment as an outpatient 3 Damage to property indicates damage extending to buildings household effects domestic livestock and pets N WARNING Installation Do not attempt to install the air conditioner yourself Ask your dealer or a contractor with specialized experience to install the air conditioner Electric shocks and or a fire may result if you attempt to install the air conditioner yourself and the air conditioner ends up not being installed perfectly Use only with the authorized air conditioner units Be absolutely sure to use only the authorized air conditioner units designated by the manufacturer Also ask a contractor with specialized experience to install them Electric shocks and or a fire may result if you attempt to install the parts yourself and the parts end up not being installed perfectly Operation Do not operate the buttons with wet hands Failure to heed this warning may result in electric shocks and or trouble Do not get the control unit wet Take steps to avoid
20. creen to select the swing E e type B Refer to the Owner s Manual supplied with the gt v indoor unit about the swing type 4 Push the gay MENU button i X appears on the display Swing type gt The unit selection screen appears when the group control is used Push the By CANCEL Standard button on the unit selection screen to finish the e Dual setting operation X appears on the display Cycle E Return Fix NOTE No function appears on the display for the models not equipped with the Swing type setting Push the EEJ CANCEL button to stop the setting procedure No setting has been made and the screen returns to Louver setting Refer to Information Group control page 38 15 Owner s Manual Lite Vision plus Remote Controller B Louver lock The direction of the louver can be locked individually Carry out the setting operation while the indoor unit is stopped Turn off the air conditioning unit before starting the setting operation Before setting TOSHIBA 1 Pushthe v v button to select Louvrseting 3 Louver setting on the menu screen then push the HEETE Set F2 button 2 Pushthe v button t
21. e Use Operate the remote controller according to the following procedure when it is used for the first time or when the settings are changed Pushing the b ON OFF button starts running the air conditioning unit with the settings made on the remote controller from the next time Preparation Turn on the circuit breaker X Setting appears on the display of the remote controller when the power is turned on When the power is turned on it takes about 1 minute before the remote controller becomes operable This is not a malfunction NOTE Do not turn off the circuit breaker during the season using the air conditioning unit Turn on the circuit breaker 12 hours or more before starting running the air conditioning unit when the unit has not been used for an extended period of time Lite Vision plus Remote Controller Owner s Manual 3 Part Names and Functions TOSHIBA Room A 12 00 24 HtCool 5 FL Dn 6 The button LED lights while the air he conditioning unit is running NN 1 Model name label 2 3 1 o ON OFF button 5 page 6 2 A button During normal operation adjusts the temperature 6 On the menu screen selects a menu item page 6 3 wv button 7 During normal operation adjusts the temperature On the menu screen selects a menu item page 6 4 gm MENU button 8 Displays the menu screen page 8 a T L Temperature sensor F1 button Varies
22. elect 2 Start time or 3 End time for setting the Night operation time To set the Night operation time Night operation 1 Push the Vv v button to select 1 Night operation 2 Start time on the Night operation ON OFF 2 Start time 22 00 screen 3 End time 10 00 Push the assum F1 a EB Return Fix Gees F2 button to set the time Pushthe Vv button to select 3 End time Push the ques F1 amm F2 button to set the time Q1 A N Push the EE MENU button gt The screen returns to the menu screen NOTE The Night operation is not available for multi type air conditioning system No function appears on the display The 24 hour operation of Night operation is performed when the end time is the same as the start time Cooling heating performance may be reduced a little because the operation priority is put on the quietness for the Night operation Adjust the clock before setting the Night operation page 31 3 appears on the detailed display when the Night operation is activated The Night operation cannot be set on the Follower remote controller in the dual remote controller system No function is displayed on the screen 23 Lite Vision plus Remote Controller Owner s Manual T Filter sign reset H filter sign appears on the detailed display not displayed when it is in the normal displ
23. en during key lock Mode i gt All keys are unlocked while Check is Lock Unlock displayed Fan speed gt For the key lock setting refer to the owner s Lock Unlock manual gt The factory default is Lock EB Return E Fix 33 Lite Vision plus Remote Controller Owner s Manual E Language Select a language for the screen text 6 dealer De 1 Push the v v button to select TILER EWES 7 Language on the Initial setting screen 8 Press amp hold 4 sec then push the Ga Set F2 button E Return 2 Pushthe vV button to select Set the language 3 Push the EE MENU button Setting appears on the screen then the Screen returns to the Initial setting screen These two screens appear for RBC AMS51E ES Language 1 2 English French Frangais Germany Deutsch Spanish Espa ol Portuguese Portugu s EB Return Fix l Language 2 2 Dutch Nederlands E Return Fix l 34 Lite Vision plus Remote Controller Owner s Manual B Press amp hold 4sec Set the press and hold operation for the ON OFF button 1 Pushthe v v button to select Initial setting 2 2 8 Press amp hold 4sec on the menu screen 6 Header Follower then push the EEEE Set F2 7 Language button Pushthe A A v button to select ON or OFF IE Return C
24. ete the settings for each day Schedule timer 3 3 1 Push the amma Reset F2 button Day MEM on the day selection screen 5 ON 06 00 25 C 6 OFF 10 00 C 2 Push the ammam Yes F1 button en m 2 gt The schedule of the day selected is deleted ET Push the HT No F2 button to return to the Condition setting screen lt Schedule timer Delete the day setting E Return Yes 21 Lite Vision plus Remote Controller Owner s Manual To copy the settings of the previous day a 1 Push the t3 MONITOR button on the day D ri 2 selection screen oe 2 Push the mmc Yes C F1 button 9 _ gt The schedule of the previous day is copied gt Push the Gt No 2 F2 button to E Return Fix Reset return to the Condition setting screen Schedule timer Copy the previous day setting EB Return Yes NOTE Push the EEJ CANCEL button to stop the setting procedure No setting has been made and the screen returns to the Schedule timer screen E Holiday setting Setthe days of the week when the schedule timer is not used Schedule Umer 1 Pushthe A v v button to select 1 Schedule timer ii 2 PS bi f ON OFF 3 Holiday setting on the Schedule timer 2 Condition setting Screen 2 Push the mmc Set F2 button EB Return EEB Fix 3
25. formation on the 2S niles Ure try Information screen then push the D Set F2 button E Return pr 1 Set 37 Lite Vision plus Remote Controller Owner s Manual E Group control The following functions can be set individually for each unit when the group control is used Wind direction setting Individual louver setting Swing type setting Louver lock setting Auto grille setting Operate the remote controller according to the procedure below before setting each function 1 Select the group controlled function on the Wind direction menu screen then push the EEEE 1 4 Set F2 button 1 2 1 5 EE AE 2 Push the amm mmm unit F1 button to a select the unit to set Set gt The selected unit changes as follows each time a the button is pushed 1 1 HL1 2_ P9 ALL E D s 3 Push the amma Set F2 button gt M gt The setting display for the selected unit appears Wind Gres 4 Push the gy CANCEL button Pushing the I CANCEL button returns to dist 1 4 the previous screen 1 2 1 5 Pushing the g y CANCEL button when setting 1 3 ALL Swing type Louver lock or Auto grille shows x SETTING on the screen EB Return Set 1 1 Wind direction The number address of the selected unit appears
26. he louver is locked in the position 4 or 5 while cooling Refer to Information Group control page 38 4 Off reminder timer E Off reminder timer Before setting 1 Pushthe v button to select Off reminder timer 4 Off reminder timer on the menu screen 1 0ff reminder timer then push the ga Set F2 ON OFF button 2 Timer setting Off in TOSHIBA 90 min EN Reun EF E eS Eee a 6 5 Off reminder timer Set the length of time until the air conditioner stops automatically 1 0ff TED 1 Push the LA I I v V button to select ON OFF 1 Off reminder timer be n 2 Push the amr NN e F1 button 90 min 2Push the SEB e gt C F2 button to EB Return Fix turn off the Off reminder timer C 3 Pushthe A v v button to select 2 Timer setting 10f o reminder timer 4 Push the Ga F1 amm ON OFF F2 button to set the time 2 Timer setting gt The time can be set at 10 minutes intervals Off in Eon 5 Push the EE MENU button GB Return EEB Fix The screen returns to the menu screen Sass 17 Lite Vision plus Remote Controller Owner s Manual NOTE The air conditioner stops running after the specified time has elapsed Elapsed time of the Off reminder timer m E B Running Stop Start Off reminder timer No remaining time appears on the detailed display when the Off rem
27. inder timer is used The Off reminder timer does not work in the following cases When the Off reminder timer is deactivated When an error has occurred While the test operation is in progress While setting the functions When the central control is used when the run and stop operation is prohibited The Off reminder timer cannot be set on the Follower remote controller when the dual remote controller system is used The time of Off reminder timer can be set within the range from 30 minutes to 240 minutes Push the gy CANCEL button to stop the setting procedure No setting has been made and the screen returns to the menu screen 18 Owner s Manual Lite Vision plus Remote Controller 5 Schedule timer Up to 8 different running patterns per day can be programmed with the schedule timer Days of the week when the schedule timer is not used can also be set in Holiday setting TOSHIBA 1 Pushthe wv v button to select Schedule timer 5 Schedule timer on the menu screen then push the ammm Set F2 2 Condition setting button 3 Holiday setting 2 Condition setting Set the running condition of each day 2 3 Holiday setting Set the day when the schedule timer is not used Vv Schedule timer Sencar 2 Push the LA w Vv button to select ON OFF 4 Schedule timer 2 Condition setting 3 Push the qu e F1 button 3 Holiday se
28. its function according to the setting screen page 6 F2 button Varies its function according to the setting screen page 6 i8 CANCEL button Functions as indicated on the screen such as returning to the previous menu screen page 8 4 amp 3 MONITOR button Displays the monitoring screen page 7 Switching between the normal display and detailed display Push and hold the ZB CANCEL button and amp 83 MONITOR button at the same time for more than 4 seconds to switch the display mode The normal display mode is selected as a factory default setting Normal display mode factory default Lite Vision plus Remote Controller Detailed display mode Room A 12 00 i 2 6 us l 24c EN NENNEN So Owner s Manual Icons appear on the screen when the detailed display mode is selected V Icon list 1 Refer to the Installation Operation Manual supplied with the remote controller oe Energy saving operation is 2 Fes pid function is activated page 26 page 17 19 Shows the remote controller sensor is activated 1 Shows the Louver lock is activated page 16 Shows the Night operation is activated page 23 Shows the setting of the louver page 11 12 Shows the central control device prohibits the use of the remote controller 1 Shows the filter needs to be cleaned page 24 39 Y Ventilati
29. lf clean operation or fan operation Temperature around the outdoor unit Displays the temperature around the vent of the outdoor unit The displayed temperature may differ from the actual outdoor temperature Others The Header status appears during group connection Activating the ke lock function Room A 12 00 amp GS EESE Push and hold the I CANCEL button for more than 4 seconds to activate the key lock function Push and hold the I CANCEL button for more than 4 seconds again to release the key lock Iz appears on the screen when the button set to be locked is pushed while the key lock function is activated Select the buttons to be locked from Key lock in 10 Initial setting on the menu screen page 33 Lite Vision plus Remote Controller Owner s Manual SSS ESSER Self clean operation only for models equipped with the function Room A 12 00 The self clean operation is the function to dry inside the air conditioner after the Auto cooling Cool or Dry operation so that the inside of air conditioner is kept clean The self clean operation time differs depending on the time of the Auto cooling Cool or Dry operation Time of the Auto cooling self clean operation Cool or Dry operation time The self clean Less than 10 minutes operation is not performed Between 10 minutes and
30. louver Owner s Manual For 4 way cassette types the wind direction and swing operation of each louver can be set individually TOSHIBA Individual louver 3 Do ov iB eun WB Louver c3 El d o 5 v 1 2 13 Pushthe w v button to select 2 Individual louver on the menu screen push the EED Set F2 button Push the amr Louver No F1 button to select the louver to set gt The display changes as follows each time the button is pushed mmm E Un mw gl j Louver 1 Louver 2 Louver 3 Louver 4 All Electrical control 3 box Refrigerant pipe 4 Drain pipe Pushthe v v button to select the wind direction Refer to Wind direction about how to set the wind direction page 11 Push the gy CANCEL button gt The screen returns to the menu screen Owner s Manual Lite Vision plus Remote Controller E Turning on off the louver swing To swing the louver the display while the louver swing is on individual fouver 1 Push the auem Swing ON F2 Ds button on the 2 Individual louver screen 4 2 ILI zi 2 Push the a CANCEL button gt The screen returns to the menu screen EB Return Louver
31. n appears on the detailed display while the air conditioner is stopped The sign is not displayed when the remote controller is in the normal display mode The remaining time for filter cleaning of the header air conditioning unit is displayed when 2 or more indoor units are connected The remaining time for filter cleaning differs depending on the connected indoor unit 24 Lite Vision plus Remote Controller Owner s Manual 8 Auto grille Only for models equipped with the function Carry out the setting operation while the indoor unit is stopped Turn off the air conditioning unit before starting the setting operation Operate the auto grille function of the indoor unit Auto grille 1 Push the LA v vV button to select Tene 8 Auto grille on the menu screen then Be le down push the qu Set F2 button ON OFF Grille stop 2 Pushthe A A V v button to lift or f lower the auto grille T 3Pushthe amp ON OFF button to stop lifting or lowering the auto grille 3 Push the E CANCEL button X Setting appears on the display then the screen returns to the menu screen NOTE The air conditioning unit stops running when Auto grille is selected on the remote controller Auto grille setting is not available for the indoor unit not equipped with the auto grille function No function appears on the display When the button is pushed it takes a few second before the
32. n the Wind direction screen while the louver swing is on stops swinging and sets the wind direction EB Return Louver to 1 Se i 2 Push the EI CANCEL button gt The screen returns to the menu screen 11 Lite Vision plus Remote Controller Owner s Manual To stop the louver swing the display when the louver swing is stopped Wind direction 1 Push the memmen Swing OFF F2 p button on the Wind direction screen 7 Push the WEE Swing OFF F F2 m button to stop swinging The louver stops in the position where the button is pushed EB Return Louver The louver does not stop in the position 4 or 5 when the operation mode is Cool or Dry The louver stops in the position 3 even if the button is pushed when the louver is in the position 4 or 5 Display when the louver swing is stopped y y FAN HEAT COOL DRY Pushing v v while the display when the louver swing is stopped appears on the screen sets the louver in the position 1 2 Push the ge CANCEL button gt The screen returns to the menu screen NOTE No function appears on the display for the models not equipped with the wind direction setting Refer to Information Group control page 38 aa appears on the display when the Louver lock function is used page 16 12 Lite Vision plus Remote Controller 2 Individual louver Individual
33. ntrast 4 Backlight 5 Key lock E Return C Set 0 z o j lt gt Initial setting items 1 Pushthe A wv v button to select 10 Initial setting on the menu screen then push the HD Set F F2 button 2 Pushthe A wv v button to select the item to set 3 Push the mmu Set F2 button Item Function 1 Clock Settings for the clock year month date time 2 Name of room Refer to the Installation Operation Manual supplied with the remote controller 3 Screen contrast Contrast adjustment of the LCD 4 Back light Turning on off the back light of the LCD 5 Key lock Prohibiting the button operations 6 Header Follower Refer to the Installation Operation Manual supplied with the remote controller 7 Language Setting for the language displayed on the remote controller 8 Press amp hold 4sec Setting for the press and hold operation for the ON OFF key B Clock Set the year month date and time Initial setting 1 2 1 Clock 2 Name of room 3 Screen contrast 4 Backlight 5 Key lock E Return Cd Clock Month 01 Year 2010 Hour 00 Minute 00 EB Return Fix E 1 Pushthe Vv button to select 1 Clock on the Initial setting screen then push the HEESE Set F2 button 2 Pushthe A v v button to select the year month da
34. o select E Return 2 Louver lock then push the SEEE Set F2 button m 9 E B o 5 3 Push the mmen Louver No F1 Louver lock button to select the louver to set p gt The display changes as follows each time the AL 1 n button is pushed i LL m m L 1 Lg Lt Lt Lt uci EB Return Fix m 7 Louver 1 Louver 2 Louver 3 Louver 4 All Electrical control box Louver lock 3 EI E LJ a Refrigerant pipe De Y a EB Return Fix Drain a Co 4 Pushthe v button to select the louver wind direction gt Push the A button to move the louver upward Push the s v button to move it downward SILSILULUEHEE M o O 5 9 oka 5 Push the gg MENU button X appears on the display gt The unit selection screen appears when the group control is used Push the J CANCEL button on the unit selection screen to finish the setting operation X appears on the display 16 Owner s Manual Lite Vision plus Remote Controller NOTE No function appears on the display for the models not equipped with the Louver setting Push the EEI CANCEL button to stop the setting procedure No setting has been made and the screen returns to 3 Louver setting aa appears on the display when the Louver lock function is used Pushthe w v button repeatedly to select the Not locked setting as the louver direction to release the lock Condensation may occur if t
35. om Screen contrast Back light Key lock Header Follower Language Press amp hold 4sec ON OFF Fan speed 24H ventilation off 12 Information Model information Service information l About symbols in this manual The meanings of symbols used in this manual are as follows Running _ Indicates the operation is available only while the air conditioner is running 10 Lite Vision plus Remote Controller Owner s Manual 1 Wind Direction E Wind direction Setthe wind direction N CAUTION Refer to the instructions for the wind direction adjustment in the Owner s Manual supplied with the indoor unit before setting Before setting TOSHIBA 1 Pushthe vw v button to select Wind direction 4 Wind direction on the menu screen p then push the HEETE Set F2 NO button EB Reun YA Louver 2 Pushthe A v v button to select C3 the wind direction rz LCS EG E di o Qo o w Operation mode Available directions AUTO healing 0 9 e ye 6 COOL DRY AUTO cooling ee 3 Push the E3 CANCEL button to return gt The screen returns to the menu screen i Turning on off the louver swing To swing the louver the display while the louver swing is on Wind direction 1 Push the amr Swing ON F2 button on the Wind direction screen Pushing the vw v button o
36. on icon list Ventilation icons appear on the display only when a ventilation unit is connected Refer to the Owner s Manual supplied with the Air to Air Heat Exchanger for details about the ventilation icons OR Automatic mode 2 24 hour ventilation mode e Bypass mode EJ Nighttime heat purge mode p Total heat exchange mode Lite Vision plus Remote Controller Owner s Manual 4 Operation B Running operation Some operation modes are not available depending on the type of indoor unit dm UAI Rt 1 Pushthe ON OFF button to start Room A 12 00 1 I 44 running E 24 2 Push the amma Mode F1 button na ea to select the operation mode Yt Cool s gt The operation mode changes as follows each time the button is pushed 5 6 Auto p Heat p Dry p Cool Fan A i 3 Push the ON OFF button to stop M running B Changing the fan mode The available fan modes vary depending on the indoor unit connected og 9 B 1 Push the amze Fan speed F2 button to select the fan mode gt The fan mode changes as follows each time the button is pushed Auto gt EEE High 68 Med gt m Low gt Q appears on the display when the connected indoor unit is not equipped with the fan mode gt 0 is not available when Fan is selected as the operation mode
37. page 31 Pushthe Vv button to set the time and energy saving ratio gt Push the amm lt F F1 ED o e F2 button to set the value Push the EE MENU button gt The screen returns to the Energy saving operation screen The time of the schedule setting for the Save operation can be set within the range from 0 00 to 23 50 at 10 minute intervals The save ratio of the schedule setting for the Energy saving operation can be selected only from random 1 50 or 096 Adjust the clock before setting the energy saving schedule page 31 The lower save ratio is applied when the different save ratios are set at the same hours on the schedule Random is the value set at Energy saving ratio 28 Lite Vision plus Remote Controller Owner s Manual E Set temp range limit Set the temperature range for each operation mode Energy saving 1 Pushthe wv v button to select 1 Energy saving operation 2 Set temp range limit on the Energy ON saving screen then push the Ga Serves Fa button 3 Return back S lt OFF gt EE Rew 2 RRE n A v v button to set the C gt Push the SEESE lt lt F1 Swe 2 F2 button to set the Set temp range limit value Minimum Maximum Cool EME 29 0 c 3 Push the KE MENU button Heat 18 0 C 29 0 C gt The screen returns to the Energy saving Dry 180 C 29 0 C screen Auto 180
38. t be set on the Follower remote controller when the dual remote controller system is used Adjust the clock before setting the Schedule timer page 31 The time can be adjusted by the minute The temperature can be set within the range from 18 C to 29 C The limited temperature range is applied if the set temp range limit function is activated Push the IZ CANCEL button to stop the setting procedure No setting has been made and the screen returns to the Schedule timer screen The operation mode for the Schedule timer is the mode selected last time when the air conditioning unit was used E Condition setting Up to 8 different running patterns per day can be programmed 2 Condition setting Schedule timer 1 Schedule timer ON OFF 3 Holiday setting EB Reun EE Fix Co Set Schedule timer 1 3 Day Monday 1 C 2 C 3 C 4 C IE Return D Gas m Schedule timer 1 3 Day d me C 20 C 300 C 4 sei eG EB Return Fix 1 20 Pushthe A v v button to select 2 Condition setting on the Schedule timer screen Push the ENNE WENB Set F2 button The current setting appears gt Push the EE Day F1 button to confirm the settings for each day 2Push the EINEN Next F2 to confirm the current settings 8 different settings appears Push the
39. te and time Push the amm F1 ENIRCUNENN F2 button to set the value 3 Push the gag MENU button 31 Owner s Manual Lite Vision plus Remote Controller To adjust the clock 1 Pushthe A v v button to select Month 01 4 Clock on the Initial setting screen Year 2010 then push the ENNE EENB Set F F2 Hour 00 button Minute 00 EB Return Fix 2 Push the A v v button to select Cm the year month date and time 2Push the amm F1 EEEEEEUSS a A F2 button to set the value 3 Push the gam MENU button gt The screen returns to the Initial setting screen Room A 12 00 E The clock display appears on the upper right of the a Screen The clock display blinks if the clock setting has tt Cool e been reset due to power failure or other cause Fan Speed NOTE The available date range is from January 135 2010 to December 315 2099 E Screen contrast Adjust the contrast of the LCD Initial setting 1 2 1 Pushthe l w v button to select 1 Clock 3 Screen contrast on the Initial setting 2 Name of room screen then push the HEETE Set F2 butt 4 Backlight TRUM 5 Key lock 2 Push the mmm F1 c E Return F2 button to adjust 3 Push the Egi MENU button gt The screen returns to the Initial setting screen Screen contrast EB Return GER Fix EE
40. tting 2Push the Qa e gt F F2 button to E Return E Fix turn off the Schedule timer Up to 8 different settings for the run and stop operation and the temperature can be programmed Timer Timer Timer 21 00 Change to 27 C 14 00 10 00 Change to 27 C It is troubl to adjust is troublesome to adjus Change to 27 C the temperature setting for each period of time Are there any solutions for it Timer 1 Timer 8 23 00 Operation off Timer 9 00 Start with 26 C 17 00 Change to 26 C emperature setting O Su i Timer 9 Fi 18 00 26 2 Change to 25 Schedule timer o o o can solve the 257 E E problem SO UE E E 24 5 8 3 a 3 ENMEL gt gt 37 V B E g 6 T T 9 00 12 00 15 00 18 00 21 00 23 00 NOTE appears on the detailed display when the Schedule timer is used The Schedule timer does not work in the following cases When the Schedule is deactivated Days of the week when the Schedule timer is set not to work When the clock display is blinking the clock has not been adjusted When an error has occurred While the test operation is in progress 19 Lite Vision plus Remote Controller While setting the functions Owner s Manual paeem emm m eem When the central control is used when the run and stop operation is prohibited The Schedule timer canno
41. w cee ee cw mmo RR RR EORR UR Rete 17 5 Schedule timet esie ete un ae Rie tme E piace une R ERE en ehe aes 19 6 Night operation 0 ce lh eee 23 T Filt r sign T S6L Lc ol opened ne onere eene ace qun Be E a 24 8 Auto grille 2225 c csl t e ek e X ikiii ri eddau t ke 25 9 Energy saving per EIx Gene xe RR EE EG mue RE RR IEEE mie 26 10 Initial Setting 2l e RR Ide REITDRR Rie E RES E EE 31 11 Ventilation sot meee EHE de oars ee eae ae eck PUR ERE E S 36 uiui 37 6 Maintenance cokaco ce WR E EGG x ese3ks ER Ae a RE kedda Ee ES 39 T Tro bleshootifig enun cnn mnn mU esee ee valine on i eee as CR EUR Ue ae n 40 Lite Vision plus Remote Controller Owner s Manual 1 Precautions for Safety Read these Precautions for Safety carefully before using The precautions described below include important items regarding safety Observe them without fail Understand the following details indications and symbols before reading the body text and follow the instructions Keep this Manual at accessible place for future reference Indication Meaning of Indication WARNING Text set off in this manner indicates that failure to adhere to the directions in the warning could result in serious bodily harm 1 or loss of life if the product is handled improperly CAUTION Text set off in this manner indicates that failure to adhere to the directions in the caution could result in serious
Download Pdf Manuals
Related Search
Related Contents
Royal Sovereign RCD-1000 rev 200rG KIT-AA rev 200rG KIT-AA Operating instructions School balance Dell PowerEdge C5220 Getting Started Guide APC AP89XX Power Supply User Manual CP200 User Manual engueux - Ville de Périgueux User Manual - Amica Distribution Copyright © All rights reserved.
Failed to retrieve file