Blaupunkt MP74 User's Manual
Contents
1. EQ2 or EQ3 using the corresponding softkeys 8 Press the joystick OK 8 or the AUDIO button 10 to close the menu The settings are saved Selecting sound presets You can select sound presets for the following music types e VOCAL DISCO ROCK JAZZ CLASSIC The settings for these music styles have already been programmed O Press and hold down the AUDIO button 10 for longer than two sec onds O Press the softkey assigned to the PRESET display item BLAUPUNKT Select one of the presets using the corresponding softkeys 8 Press the joystick OK 8 or the AUDIO button 10 to close the menu The settings are saved Manually adjusting the equalizer Notes on adjusting the settings We recommend you use a CD that you are familiar with for making changes to the settings Before adjusting the equalizer set the sound and volume distribution settings to zero and deactivate X BASS For fur ther details refer to the chapter entitled Sound and volume distribution O Listen to a CD gt What kind of impression does the sound make O Now refer to the Sound impres sion column in the table entitled Help adjusting the equalizer Adjust the equalizer values as de scribed in the Measures column 35 ENGLISH EQUALIZER Making adjustments O Press and hold down the AUDIO button 10 for longer than two sec onds O Press2. Switching CD text on off Repeatedly press the softkey assigned to the TEXT display item until CD TEXT ON or CD TEXT OFP is displayed Setting scrolling text You can allow the CD text to be dis played as scrolling text in the bottom line of the display Switching CD scrolling text on off Repeatedly press the softkey assigned to the SCROLL display item until SCROLL ON or SCROLL OFF is displayed 24 MP3 mode You can also use this car sound sys tem to play CD Rs and CD RWs that contain MP3 music files Preparing an MP3 CD The various combinations of CD burn ers CD burning software and CD blanks may lead to problems arising with the device s ability to play certain CDs If problems occur with your own burned CDs you should try another brand of CD blank or choose another colour of CD blank To avoid problems when play ing CDs you should not burn CDs at speeds greater than 16 speed The format of the CD must be ISO 9660 Level 1 or Level 2 or Joliet Other for mats cannot be played reliably Avoid multi sessions If you write more than one session to the CD only the first session will be detected You can create a maximum of 127 di rectories on a CD You can use this de vice to access each of these directo ries Each directory can in turn contain up to 254 tracks and subdirectories that can also be accessed A maximum of 8 lev els of directo
3. MIX OFF appears briefly in the dis play Repeating tracks REPEAT O Press the softkey 8 assigned to the REPEAT display item REPEAT TRACK appears briefly in the display The track is repeated continu ously until you deactivate REPEAT Cancelling REPEAT O Press the softkey assigned to the REPEAT display item again REPEAT OFF appears briefly in the display Normal playback is then resumed BLAUPUNKT Scanning tracks SCAN You can briefly play scan all the tracks on the CD O Press and hold down the joystick OK 8 for longer than two sec onds The subsequent tracks on the CD are briefly played in ascending order Note e You can set the scanning time For further details please read the sec tion entitled Setting the scanning time in the Radio mode chapter Cancelling SCAN and continuing listening to a track To cancel scanning press the joystick OK 8 The currently scanned track will then continue to be played normally Displaying CD text Some CDs include CD text The CD text might contain the names of the artist album and tracks You can allow the CD text to be dis played as scrolling text in the bottom line of the display every time you switch to another track If the inserted CD does not contain any CD text NO TEXT will appear briefly in the display if the CD text feature is activated 23 ENGLISH CD MODE MP3 MODE
4. This device can only play MP3 files that have the MP3 file extension Note To ensure uninterrupted playback e do not try changing the file exten sion to MP3 of any files other than MP3 files and then attempt to play them e Do not use mixed CDs containing both non MP3 data and MP3 tracks e Do not use mix mode CDs contain ing both audio tracks and MP3 tracks Switching to MP3 mode MP3 mode is activated in the same way as normal CD mode For further details please read the section entitled Switch ing to CD mode Inserting a CD in the CD mode chapter 25 ENGLISH MP3 MODE Selecting a directory Selecting from the directory list You can display a list of all the directo ries on the inserted CD and then con veniently select a directory from it The directories are displayed with the names that you created when burning the CD Press the NEXT button 4 whilst an MP3 is playing The track list is displayed for the cur rent directory Move the joystick 8 to the left or right to switch to the directory list O Press the joystick 8 up or down to browse through the list f you want to select a directory from the list move the selection marker to the directory that you want and press the joystick OK 8 The list of tracks in the selected direc tory is displayed Move the selection marker to the track that you want and press the joystick OK 8
5. Note Information on handling CDs inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer Information on using the Compact Drive MP3 and recording music tracks onto the Compact Drive MP3 s Microdrive hard disk can be found in the operating instructions supplied with the Compact Drive MP3 Switching to CD changer mode O Press the SOURCE button 12 re peatedly until the CD changer menu is displayed Playback continues from the point at which it was last interrupted If the magazine was removed from the CD changer and then replaced the CD magazine will first be scanned and play back will begin from the first track on the first CD that the CD changer detects BLAUPUNKT Selecting CDs To move up or down to another CD O press the softkey assigned to the display item of the CD that you want CD1 CD10 To do so you might need to switch pages in the main CD changer menu by press ing the softkey 5 assigned to the NEXT or PREVIOUS display item or ENGLISH repeatedly press the joystick 8 up or down until the number of the CD that you want appears in the dis play Selecting tracks To move down or up to another track on the current CD O repeatedly press the joystick 8 to the left or right until the number of the track that you want is dis played If you press the joystick 8 once to the left the curr
6. Radio CD MP3 Los Angeles MP74 US 7 644 816 310 Seattle MP74 US 7 644 811 310 Operating instructions http www blaupunkt com Caution The device s tuner is already configured at the factory for the North South Amer ica region AREA USA If you are outside North South America please select the AREA EUR setting For further details please read the section entitled Ad justing the tuner settings in the Radio mode chapter Attention Le r cepteur de l autoradio est r gl par d faut sur la r gion Am rique du Nord Am rique latine AREA USA Quand vous vous trouvez en dehors de l Am rique du nord ou de l Am rique latine s lectionnez l option AREA EUR Pour plus d informations reportez vous la section R glage du tuner du chapitre Mode RADIO Atenci n El sintonizador del equipo sale de f brica programado para la regi n de Norteam ri ca Sudam rica AREA USA Si se encuentra fuera de la regi n de Norteam rica Sudam rica seleccione la opci n AREA EUR Para m s detalles lea el punto Ajustar el sintonizador en el cap tulo Modo de radio Aten o O receptor do aparelho foi originalmente configurado para uso na regi o da Am rica do Norte e Sul AREA USA Quando abandonar a rea da Am rica do Norte Sul escolha a configura o AREA EUR Para tal leia o par grafo Con figurar o sintonizador no cap tulo R
7. EXTERNAL AUDIO SOURCES gt Press the softkey 5 assigned to To enter a name the AUX2 display item By press gt press the joystick 8 to the left or ing the AUX2 softkey you can right to move the input marker NO IAS ORAE gt Enter the letter that you want by tings pressing the joystick 8 up or down Note e f a CD changer is connected you cannot change the AUX1 input ENGLISH O Once you have finished entering the name press the joystick OK or the MENU button 9 to close Press the joystick OK 8 or the the menu MENU button 9 to close the The settings are Saved menu The settings are saved Note e f the AUX inputs are activated you can select them by pressing the SOURCE button 12 Naming the AUX input You can give each AUX input a name so you can recognise them more easily when selecting them using the SOURCE button 12 e g you can give them the device names that they are connected to O Press the MENU button 9 O Press the softkey assigned to the AUX display item The AUX menu is displayed O Press the softkey assigned to the EDIT display item under AUX1 or AUX2 The default text for the selected input appears in the display The text input marker flashes at the beginning of the line BLAUPUNKT 39 POWER ON MESSAGE SERIAL NUMBER Entering the power on message After you switch on your device the syste
8. FM1 FM2 FM3 FMT or AM1 AM2 AMT 17 ENGLISH RADIO MODE Tuning into a station There are various ways of tuning into a station Automatic station seek tuning Move the joystick 8 down or up The radio tunes into the next receiva ble station Tuning into stations manually You can also tune into stations manual ly Note You can only tune into stations manual ly if the RDS function is deactivated Move the joystick 8 left or right Setting the sensitivity of station seek tuning You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception O Press the TUNER button 13 while in radio mode The radio functions menu appears in the display O Press the NEXT button 4 Note If you open the radio functions menu while in AM radio mode the softkey assigned to the SENS display item will appear on the first page O Press the softkey assigned to the SENS display item 18 O Press the softkey 6 assigned to the FM or AM display item to adjust the sensitivity for FM or AM Move the joystick 8 up right or down left to adjust the sensitivity You can adjust the sensitivity in steps from 1 to 6 SENSITIVITY 1 is the low est setting and SENSITIVITY 6 is the highest sensitivity setting for distant sta tions Press the joystick OK 8 or the M
9. assigned to the EDIT display item You will now enter edit mode The first input position flashes Move the joystick 8 up or down to select the character that you want If you want an empty space simply select the underscore Move the joystick 8 to the left or right to change the input position C To save the name press the joy stick OK 8 BLAUPUNKT Deleting a CD name O Listen to the CD whose name you want to delete O Press the NEXT button 4 The CD changer functions menu ap pears O Press the softkey assigned to the CD NAME display item O Press and hold down the softkey 5 assigned to the CLEAR CD display item for longer than two seconds The CD name will be deleted ENGLISH Deleting all CD names O Listen to a CD O Press the NEXT button 4 The CD changer functions menu ap pears O Press the softkey 6 assigned to the CD NAME display item O Press and hold down the softkey 5 assigned to the CLEAR ALL display item for longer than two seconds The CD names will be deleted Note This function is not available for the Compact Drive MP3 If you use this function with the Compact Drive MP3 CDC CLEAR is displayed for 45 sec onds You will not be able operate the device during this time period 31 CLOCK TIME CLOCK time Setting the clock time The clock can be set automatically us ing the RDS signal You can also s
10. if you still have any questions on how to operate the device please contact your dealer or the tele phone hotline for your country You will find the telephone number printed at the back of this booklet We provide a manufacturer guarantee for our products bought within the Eu ropean Union You can view the guar antee conditions at www blaupunkt de or ask for them directly at Blaupunkt GmbH Hotline Robert Bosch Str 200 31139 Hildesheim Germany Road safety Zt Road safety has absolute prior ity Only operate your car sound sys tem if the road and traffic conditions allow you to do so Familiarise your self with the device before setting off on your journey You should always be able to hear police fire and ambulance sirens in good time from inside your vehicle BLAUPUNKT For this reason listen to your car sound system at a suitable volume level during your journey Safety notice Zi The car sound system and the device s control panel flip release panel heat up during use Therefore when removing the flip release panel only hold it by its non metallic surfaces Allow the car sound system to cool down first if you want to uninstall the whole unit Installation If you wantto install your car sound sys tem yourself please read the installa tion and connection instructions that follow these operating instructions Accessories Only use accessories approved by Blau punkt Remote c
11. 16 Accessories A date ries dice dear 7 Switching to radio mode 17 Activating RDS function 17 deactivating demo mode 8 Selecting the waveband Theft protection 8 memory bank 17 Detachable control panel 8 Tuning into a station 18 Detaching the control panel 8 Setting the sensitivity of station Attaching the control panel HL WIN 9 seek tuning TT PEE 18 Switching on off 9 nn URI stations ne SCAN cited deve 18 Switching on off using button O so 9 j ONE ane i Setting the scanning time 19 Switching on off using the vehicle KM Storing stations 19 NIHON s e cce nou eei Dudas 9 E mes Storing stations automatically Adjusting the volume 10 Travelstore s 19 Setting the power on volume 10 Listening to stored stations 19 Volume mute enm 10 Programme type PTY NNUS 20 Telephone audio navigation audio 10 Optimising radio reception 21 Automatic sound sse 11 Activating deactivating the radio Sound and volume text display sank Kg NE OX EC PK rere 21 distribution settings 12 CD mode oce 22 Adjusting the bass 12 Switching to CD mode and Adjusting the treble 12 inserting a CD sess 22 Adjusting the right
12. PTY appears briefly in the display The radio will then retune to the station that it re ceived last Note If you want to switch back to the pro gramme types display open the second page of the radio functions menu again and press the softkey assigned to the PROG TYP display item BLAUPUNKT RADIO MODE Optimising radio reception Treble reduction feature during interference HiCut The HiCut function has the effect of re ducing interference noise during poor radio reception If interference occurs the system automatically reduces the treble thus reducing the interference lev el Setting HiCut Press the TUNER button 13 while in radio mode The first page of the radio functions menu is displayed Press the NEXT button 4 Repeatedly press the softkey 6 assigned to the HIGH CUT dis play item until the setting that you want appears in the display HICUT 0 means that no automatic re duction of the treble and interference level will be made HICUT 2 means that a maximum reduction will be made Press the joystick OK 8 or the TUNER button 13 to close the menu The settings are saved BLAUPUNKT Activating deactivating the radio text displa Some stations use the RDS signal to broadcast scrolling texts known as ra dio texts You can allow radio texts to be displayed or you can block them O Press the TUNER button 13 while in
13. Press the NEXT button 4 to dis play the main MP3 menu again Selecting a directory using the joystick To move up or down to another directo ry C repeatedly press the joystick 8 up or down until the number of the di rectory that you want appears at the very beginning of the top line of the display 26 Note e Any directories not containing MP3 files will be skipped automatically If for instance you are listening to tracks in directory D01 and you se lect the next directory by pressing the joystick 8 directory DO2 which does not contain any MP3 tracks will be skipped and DOS will be played see diagram The dis play will then automatically switch from D02 to DOS Selecting tracks Selecting tracks from a track list You can display a list of all the tracks in the current directory and then conven iently select a track from it To display the track list press the NEXT button 4 O Press the joystick 8 up or down to browse through the track list If you want to select a track from the list move the selection marker to the track that you want and press the joystick OK 8 Press the NEXT button 4 to dis play the main MP3 menu again Selecting tracks using the joystick To move up or down to another track in the current directory O move the joystick 8 to the right for the next track or to the left for the previous track until the number of the track that you want
14. close the menu The settings are saved BLAUPUNKT EQUALIZER Help adjusting the equalizer Sound Impression problem Bass sound is too weak Dirty bass Booming sound Unpleasant pressure Sound very much in the foreground aggressive no stereo effect Dull sound Little clarity No brilliance to the instruments BLAUPUNKT Measures Increase bass with Frequency 32 to 160 Hz Level 4 to 6 dB ENGLISH Reduce the lower mid level with Frequency 400 Hz Level approx 4 dB Reduce the mid level with Frequency 1000 to 2500 Hz Level 4 to 6 dB Boost the treble range with Frequency 6300 to 10000 Hz Level 2 to 4 dB 37 AMPLIFIER SUB OUT EXTERNAL AUDIO SOURCES Amplifier sub out The car sound system provides connec tions that allow you to connect external amplifiers You can also connect a sub woofer to the device s integrated low pass filter In order for this to work the amplifier and subwoofer must be con nected in the manner described in the installation instructions We recommend you use well matched products from the Blaupunkt or Velocity product ranges Switching the internal amplifier on off If you use external amplifiers you can switch off the device s internal amplifier INTERNAL AMP OFF setting Note e Please check this setting if the loudspeakers do not emit any sound Press the MENU button 9 O Press the softkey assigned
15. in the dis play Repeating individual tracks or whole directories REPEAT O Press the softkey assigned to the REPEAT display item REPEAT TRACK appears briefly in the display To repeat the whole directory O press the softkey assigned to the REPEAT display item again REPEAT DIR appears briefly in the display Cancelling REPEAT To stop the current track or current di rectory from being repeated O repeatedly press the softkey that is assigned to the REPEAT display item until REPEAT OFF appears briefly in the display 27 ENGLISH MP3 MODE Configuring the display There are various options available for displaying the name of the artist track and album ID3 tag or the directory and file name The information contained in the ID3 tag album artist and track can only be displayed if it was saved when the CD and MP3 file were created The track name is always displayed in the top line of the display during play back The track name appears once as scrolling text after a track change and is then abbreviated to 16 characters and displayed Note If the track name is not available in the ID3 tag the system will display the file name instead You can choose between different items of information to be displayed in the bottom line of the display info line Selecting information in the info line In the bottom line of the display info
16. line you can choose between display ing the various items of MP3 informa tion such as track artist album or di rectory number DIR file name Repeatedly press the softkey 6 assigned to the INFO display item until the display that you want ap pears in the bottom line of the dis play Note Ifthe information on the artist track and album is not available in the form of an ID3 tag you will not be able to select it 28 Displaying all of the information for a file once To display all of the available informa tion for a track as well as the directory name and file name info displayed once as scrolling text O press the softkey assigned to the SHOW ALL display item If available the information is displayed once as scrolling text in the info line SHOW ALL flashes in the display whilst the information is being shown Setting scrolling text You can choose whether you want the display that you set under Selecting information in the info line to appear as scrolling text SCROLL ON or only once SCROLL OFF O Repeatedly press the softkey assigned to the SCROLL display item until the setting that you want appears BLAUPUNKT CD CHANGER MODE CD changer mode optional To find out which CD changers Com pact Drive MP3 can be used with this device please refer to the Accessories chapter in these instructions or contact your Blaupunkt dealer
17. to the VARIOUS display item Repeatedly press the softkey assigned to the AMP ON display item until the INTERNAL AMP ON or INTERNAL AMP OFF setting that you want is displayed The AMP ON softkey will be displayed with a dark background if the inter nal amplifier is switched on Press the joystick OK 8 or the MENU button 9 to close the menu The settings are saved 38 External audio sources You can connect up to two external au dio sources to the device Audio sourc es can for example be portable CD players MiniDisc players or MP3 play ers You can connect the first external au dio source AUX1 instead of a CD changer You can connect the second external audio source AUX2 in addition to the CD changer or AUX1 In order to be able to use the AUX in puts you must activate them in the set up menu If you want to connect an external au dio source you will need an adapter cable You can obtain this cable from a Blaupunkt dealer Switching the AUX input on off Press the MENU button 9 O Press the softkey assigned to the AUX display item The AUX menu is displayed O Press the softkey assigned to the AUX1 display item if no CD changer is connected and you want to connect an external audio source By pressing the AUX1 softkey you can switch between the AUX ILIARY 1 ON and AUXILIARY 1 OFF settings BLAUPUNKT
18. 0 000 Hz e HIGH2 315 20 000 Hz e HIGH 3 315 20 000 Hz You can adjustthe level for one frequen cy of a band in steps of 25 ranging from 12 dB to 12 dB In addition you can set the quality factor Q in three steps ranging from 1 to 3 33 ENGLISH EQUALIZER Switching the equalizer on off To switch the equalizer on off O press and hold down the AUDIO button 10 for longer than two sec onds The equalizer menu appears in the dis play To activate the equalizer press the softkey 5 assigned to the USER or PRESET display item and select an equalizer To deactivate the equalizer press the softkey 5 assigned to the OFF display item Automatically calibrating the equalizer You can electronically calibrate and store values for three different situations EQ1 for the driver only EQ2 for the driver and front passen ger EQ3 forthe front and rear occupants Hold the calibration microphone in the appropriate position whilst calibration is taking place The position of the calibration micro phone for situation 1 e g for the driver alone is at the height of the driver s head For situation 2 the calibration micro phone should be positioned between the driver and the front passenger For Situation 3 it should be placed at the centre of the vehicle interior left right front back 34 Really quiet surroundings are required for the calibration Any e
19. 0441 02 6130 0514 Hungary H 01 333 9575 01 324 8756 Poland PL 0800 118922 022 8771260 Turkey TR 0212 3350677 0212 3460040 USA USA 800 2662528 708 6817188 Brasil Mercosur BR 455 19 37452769 455 19 3745 2773 Malaysia Asia Pacific MAL 604 6382 474 03 04 TRO Blaupunkt GmbH CM PSS 8 622 404 052 4604 6413 640 CE
20. 4 V and 1 Press the MENU button 9 distortion factor at IP Press the softkey 5 assigned to 4 ohms a the VARIOUS display item 4 x 26 watts sine Ez O Press and hold down the softkey NS 4 5 assigned to the NORMSET TAAN abd display item for longer than two Shime seconds 4 x 50 watts max The device will switch off and then back power on again automatically Tuner Wavebands FM 87 7 107 9 MHz AM 530 1 710 kHz FM frequency response 20 16 000 Hz cD Frequency response 15 20 000 Hz Pre amp out 4 channels 4V lt 1kQ AUX input Input sensitivity 12V 10kQ Subject to changes BLAUPUNKT 41 Service numbers Num ros du service apres vente N meros de servicio N mero de servico Country Phone Fax WWW Germany D 0180 5000225 05121 49 4002 http Awww blaupunkt com Austria A 01 610 390 01 610 393 91 Belgium B 02 525 5454 02 525 5263 Denmark DK 44898 360 44 898 644 Finland FIN 09 435 991 09 435 99236 France F 01 4010 7007 01 4010 7320 Great Britain GB 01 89583 8880 01 89583 8394 Greece GR 0030 210 94 27 337 0030 210 94 12 711 Ireland IRL 01 4149400 01 4598830 Italy I 02 369 62331 02 369 62464 Luxembourg L 40 4078 40 2085 Netherlands NL 023 565 6348 023 565 6331 Norway N 66 817 000 66 817 157 Portugal P 01 2185 00144 01 2185 11111 Spain E 902 120234 916 467952 Sweden S 08 7501500 08 7501810 Switzerland CH 01 8471644 01 8471650 Czech Rep CZ 02 6130
21. 8 or the MENU button 9 to close the menu The settings are saved Note You can also set the power on volume to be the same as the volume level that was active before you switched off the device To do so press the softkey as signed to the LAST VOL display item in the volume menu 10 E Risk of injury If the power on volume is set to maximum the vol ume level can be very high when the device is switched on If the volume was set to maximum before the device was switched off and the power on volume is set to LAST VOL the volume level can be very high when the device is switched on again Severe damage to your hearing can be caused in both cases Volume mute You can instantaneously reduce the volume mute Briefly press button 1 MUTE appears in the display Cancelling mute Briefly press button 1 again or turn the volume control 2 Telephone audio navigation audio If your car sound system is connected to a mobile telephone and or a naviga tion system the sound system s volume will be muted as soon as you pick up the phone or as soon as a navigation announcement is made You will then hear the caller or navigation announce ment over the car sound system s loud speakers In order for this feature to work the mobile telephone and the nav igation system must be connected to the car sound system as described in the installation instructions BLAUP
22. ENU button 9 to close the menu The settings are saved Scanning receivable stations SCAN You can use the scan function to briefly play all the receivable stations You can set the scanning time to be tween 5 and 30 seconds in the menu Starting SCAN O Press and hold down the joystick OK 8 for longer than two sec onds Scanning begins SCAN appears briefly in the display followed by the current station name or frequency of the station Cancelling SCAN and continuing listening to a station Press the joystick OK 8 Scanning stops and the radio continues playing the station that it tuned into last BLAUPUNKT RADIO MODE Setting the scanning time Press the MENU button 9 O Press the softkey assigned to the VARIOUS display item O Press the softkey assigned to the SCANTIME display item Move the joystick 8 up right or down left to adjust the scanning time Press the joystick OK 8 or the MENU button 2 to close the menu The settings are saved Note e The scanning time that you set is also applied by the system to scan ning carried out in CD MP3 mode and CD changer mode Storing stations Storing stations manually O Select the memory bank that you want FM1 FM2 FM3 FMT or AM1 AM2 AMT Tune into the station that you want as described in the section entitled Tuning into a station O Press one of the six softkeys fo
23. T display item again whilst the CD changer functions menu is being displayed until REPEAT OFF appears brief ly in the display Random track play MIX To play the tracks on the current CD in random order O press the NEXT button 4 The CD changer functions menu ap pears O Press the softkey 6 assigned to the MIX display item MIX CD appears in the display To play the all the tracks on all inserted CDs in random order C press the softkey assigned to the MIX display item again MIX ALL appears in the display Cancelling MIX To cancel MIX O repeatedly press the softkey 8 as signed to the MIX display item un til MIX OFF appears briefly in the display BLAUPUNKT CD CHANGER MODE Naming CDs The car sound system allows you to assign names for up to 99 CDs not with the Compact Drive MP3 so that you can recognise them more easily The names can be a maximum of seven charac ters long FULL will appear in the display if you try assigning more than 99 names Entering editing CD names O Listen to the CD that you want to name Press the NEXT button 4 The CD changer functions menu ap pears O Press the softkey assigned to the CD NAME display item The current name of the CD is displayed in the top line of the display If the CD has not been named yet seven under scores _ will be displayed instead O Press the softkey
24. UNKT ADJUSTING THE VOLUME You can find out from your Blaupunkt dealer which navigation systems can be used with your car sound system You can set the volume level at which telephone calls or navigation announce ments will first be heard Press the MENU button 9 Press the softkey 5 assigned to the VOLUME display item Press the softkey 5 assigned to the PHONE display item in order to adjust the volume O Set the volume level that you want using the volume control 2 Press the joystick OK 8 or the MENU button 2 to close the menu The settings are saved Note You can also adjust the volume during the telephone call or navigation an nouncement using the volume control BLAUPUNKT Automatic sound This feature automatically adjusts the volume of the car sound system to suit the speed at which the vehicle is travel ling In order for this to work your car sound system must be connected as described in the installation instructions The automatic volume boost can be set to six levels 0 5 O means no boost and 5 means maximum boost O Press and hold down the AUDIO button 10 for longer than two sec onds DEQ MENU is displayed in the top line of the display O Press the softkey assigned to the AUTO SND display item O Move the joystick 8 up or down to select the setting that you want O Press the joystick OK 8 or
25. anel make sure you do not press the display BLAUPUNKT Switching on off There are various ways of switching the device on off Switching on off using button O To switch on the device press but ton The device switches on gt To switch off the device press and hold down button 1 for longer than two seconds The device switches off Switching on off using the vehicle ignition The device will switch on and off simul taneously with the ignition if it is con nected correctly to the vehicle s ignition and if it was not previously switched off using button 1 You can switch the device on even if the ignition is off Press button 1 Note To protect the vehicle battery the de vice will switch off automatically after one hour if the ignition is off ENGLISH ADJUSTING THE VOLUME Adjusting the volume You can adjust the volume in steps from O off to 50 maximum O To increase the volume turn the volume control 2 clockwise O To decrease the volume turn the volume control 2 anticlockwise Setting the power on volume You can set the default volume level at which the device plays when it is switched on Press the MENU button 9 O Press the softkey 8 assigned to the VOLUME display item O Press the softkey assigned to the ON VOL display item O Set the volume level that you want using the volume control 2 Press the joystick OK
26. appears in the display BLAUPUNKT MP3 MODE If you press the joystick to the left once the current track will be played again from the beginning Fast searching audible To fast search backwards or forwards C press and hold down the joystick to the left or right until fast searching backwards forwards be gins Scanning tracks SCAN You can briefly play scan all the tracks on the CD Press and hold down the joystick OK 8 for longer than two sec onds The subsequent tracks on the CD are briefly played in ascending order Note e You can set the scanning time For further details please read the sec tion entitled Setting the scanning time in the Radio mode chapter Cancelling SCAN and continuing listening to a track To cancel scanning press the joystick OK 8 The currently scanned track will then continue to be played normally Random track play MIX To play the tracks in the current directo ry in random order press the softkey 5 assigned to the MIX display item MIX DIR appears in the display BLAUPUNKT To play the tracks contained in all the directories on the inserted MP3 CD in random order O press the softkey assigned to the MIX display item again MIX CD appears in the display Cancelling MIX To cancel MIX repeatedly press the softkey 6 as signed to the MIX display item un til MIX OFF appears
27. dio Open here Ouvrir s v p Por favor abrir Favor abrir 2 BLAUPUNKT BLAUPUNKT CONTROLS CO oo Button to switch the device on off and mute the device s volume Volume control Y button to unlatch the detach able control panel NEXT button to display the next pages of a menu and switch memory banks in ra dio mode Softkeys the function of the softkeys depends on what is cur rently being displayed DIS ESC button to change the display content and close menus button to open the detachable control panel flip release panel Joystick and OK button OS MENU button to open the basic settings menu short press Activate deactivate demo mode long press AUDIO button to adjust the bass treble balance fader and X BASS short press To access the DEQ equalizer long press Display SOURCE button to start CD or CD changer playback or play the Compact Drive MP3 only if con nected or To play an external audio source only if connected TUNER button to activate radio mode To access the radio functions menu only possible in radio mode BLAUPUNKT CONTENTS Notes and accessories 7 Inverting the appearance of the Road safety 7 display content sss 16 Safety notice 7 Radio mode 16 Installation idea 7 Adjusting the tuner settings
28. does not find a station that corresponds to the selected programme type you will hear a beep and NO PTY appears briefly in the display The radio will then retune to the station that it re ceived last Activating PTY To use the PTY function press the TUNER button 13 while in radio mode The radio functions menu appears in the display O Press the NEXT button 4 O Press the softkey assigned to the PROG TYP display item If PTY is activated the display shows the current programme type PTY lights up in the display The programme types are displayed alongside the softkeys 8 20 Deactivating PTY To switch off the PTY function O Whilst the programme types are being displayed press the softkey assigned to the PTY OFF dis play item Selecting a programme type and starting seek tuning The PTY menu comprises several pag es on which the known programme types are displayed To browse through the PTY menu s pages press the NEXT button 4 repeat edly until the programme type that you want appears alongside one of the softkeys Press the softkey 5 assigned to the programme type that you want Move the joystick 8 up right or down left to start seek tuning The next receivable station correspond ing to your selected programme type will then be tuned into If the tuner does not find a station that corresponds to the selected programme type you will hear a beep and NO
29. e joystick 8 up or down Move the joystick 8 to the right to switch the input position to month O Set the month by moving the joy stick 8 up or down O Press the joystick 8 to the right to switch the input position to day amp Set the day by moving the joystick up or down Press the joystick OK 8 or the MENU button 9 to close the menu The settings are saved BLAUPUNKT CLOCK TIME EQUALIZER Displaying the clock time continuously You can make the system display the clock time when the device is off and the vehicle ignition is on Press the MENU button 9 O Press the softkey assigned to the CLOCK display item O Press the softkey assigned to the OFFCLOCK display item SHOW CLOCK means that the clock time will be displayed HIDE CLOCK means it will not be displayed BLAUPUNKT Equalizer This device is equipped with a DEQ Max digital equalizer It provides you with three self calibrating 5 band equalizers and five sound presets The EQ1 EQ3 equalizers can be cali brated automatically with the help of the special calibration microphone only in cluded with the Los Angeles MP74 If you like you can then adjust the auto matically ascertained values manually Furthermore you can also configure all of the equalizer settings manually The following bands are available e LOW 1 20 250 Hz e LOW2 20 250 Hz e HIGH 1 315 2
30. e spectrum analyser in your display provides a symbolic representation of the sound system s output level If the spectrum analyser is switch on it will appear automatically after a short time if you refrain from pressing a button whilst an audio source is playing You can also choose to deactivate the spectrum analyser ENGLISH Switching the spectrum analyser on off Press the MENU button 9 O Press the softkey 6 assigned to the DISPLAY display item O Repeatedly press the softkey assigned to the SPECTRUM dis play item until the SPECTRUM OFF or SPECTRUM ON setting that you want is displayed in the top display line Press the joystick OK 8 or the MENU button 9 to close the menu The settings are saved 15 ADJUSTING THE DISPLAY SETTINGS RADIO MODE Inverting the appearance of the display content You can invert the appearance of the display content Press the MENU button 9 O Press the softkey assigned to the DISPLAY display item O Press the softkey 6 assigned to the INVERT display item Press the joystick OK 8 or the MENU button 9 to close the menu The settings are saved 16 Radio mode This device is equipped with an RDS radio receiver Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the sta tion name and programme type PTY The sta
31. ent The drive draws in the CD 22 You must not hinder or assist the drive as it draws in the CD The control panel closes automatically The CD menu appears and the CD starts playing e Ifa CD is already inserted in the device press the SOURCE button 12 re peatedly until CD mode is dis played The CD menu appears and playback begins from the point at which it was last interrupted Ejecting a CD press the IS button 7 The control panel opens out towards you and the CD is ejected O Carefully remove the CD O Press the N button 7 The control panel closes Selecting tracks O Move the joystick 8 in one direc tion up or right for the next track or down or left for the previous track until the number of the track that you want appears in the display If you press the joystick 8 downwards once or to the left once the current track will be played again from the beginning BLAUPUNKT CD MODE Fast searching audible To fast search backwards or forwards O press and hold down the joystick in one direction up or right for forwards or down or left for back wards until fast searching begins Random track play MIX O Press the softkey assigned to the MIX display item MIX CD appears briefly in the display The next track to be played will be picked at random Cancelling MIX O Press the softkey assigned to the MIX display item again
32. ent track will be played again from the beginning Fast searching audible To fast search forwards or backwards press and hold down the joystick to the left or right until fast searching backwards forwards be gins 29 CD CHANGER MODE Scanning tracks SCAN You can briefly play scan all the tracks on the CD C Press and hold down the joystick OK 8 for longer than two sec onds The subsequent tracks on the CD are briefly played in ascending order Note e You can set the scanning time For further details please read the sec tion entitled Setting the scanning time in the Radio mode chapter Cancelling SCAN and continuing listening to a track To cancel scanning press the joystick OK 8 The currently scanned track will then continue to be played normally Repeating individual tracks or whole CDs REPEAT To repeat the current track press the NEXT button 4 The CD changer functions menu ap pears O Press the softkey 6 assigned to the REPEAT display item REPEAT TRACK appears briefly in the display To repeat the whole CD press the softkey 5 assigned to the REPEAT display item again whilst the CD changer functions menu is being displayed 30 REPEAT CD appears briefly in the dis play Cancelling REPEAT To stop the current track or current CD from being repeated O repeatedly press the softkey 6 as signed to the REPEA
33. et the clock manually if you cannot receive aradio station that supports this feature Setting the clock automatically To set the clock automatically press the MENU button 9 O Press the softkey 8 assigned to the CLOCK display item O Repeatedly press the softkey assigned to the AUTOSYNC dis play item until AUTOSYNC ON appears in the display AUTOSYNC ON means that the clock is set automatically using the RDS sig nal Setting the clock manually O To set the clock press the MENU button 9 Press the softkey 5 assigned to the CLOCK display item Press the softkey 5 assigned to the TIME display item The hours and minutes are displayed in the top line of the display The hours flash Adjust the hours by moving the joy stick 8 up or down To adjust the minutes press the joystick 8 to the right The minutes flash 32 Adjust the minutes by moving the joystick 8 up or down O Press the joystick OK 8 or the MENU button 9 to close the menu The settings are saved Setting the date To set the date press the MENU button 9 O Press the softkey assigned to the CLOCK display item O Press the softkey assigned to the DATE display item The year YY month MM and day DD appear in the top line of the dis play The input position for year flashes O Set the year e g 04 for 2004 by moving th
34. le directories REPEAT nm 27 Displaying the serial number 40 Configuring the display 28 Resetting the device 41 CD changer mode optional 29 A Switching to CD chanaer mode 29 Specifications M EE E 41 Selecting CDs 29 Amplifier 94e eee 41 Selecting tracks cr 29 MUNG Paes eui oed eei oir 41 Fast searching audible og CD 41 Scanning tracks SCAN 30 Pre amp OUb vas 41 Repeating individual tracks or AUX input neret 41 whole CDs REPEAT 30 Random track play MIX 30 Naming CDs eee CLOCK time Setting the clock time 32 Displaying the clock time continuously noiseen 33 Equalizer 33 Switching the equalizer on off 34 Automatically calibrating the equalizer AN 34 Selecting an equalizer 35 Selecting sound presets 35 Manually adjusting the equalizer 35 Help adjusting the equalizer 37 6 BLAUPUNKT NOTES AND ACCESSORIES Notes and accessories Thank you for choosing a Blaupunkt product We hope you enjoy using this new piece of equipment Please read these operating instruc tions before using the equipment for the first time The Blaupunkt editors are constantly working on making the operating in structions clearer and easier to under stand However
35. left volume Ejecting a CD 22 distribution balance 12 Selecting tracks 22 Adjusting the front back volume Fast searching audible 23 distribution fader 12 Random track play MIX 23 XBASS manon 19 Repeating tracks OE CEA stots 2 TN g Scanning tracks SCAN 23 Adjusting the display settings 13 Displaying CD text 23 Adjusting the viewing angle 13 Setting scrolling text 24 Adjusting the display brightness 13 Setting the button illumination colour enit fs 14 Setting the display illumination colour only Los Angeles MP74 14 Configuring the spectrum analyser 15 BLAUPUNKT 5 ENGLISH CONTENTS MP3 mode 24 Amplifier sub out 38 Preparing an MP3 CD 24 Switching the internal amplifier Switching to MP3 mode 25 ON Orientale persan 38 Selecting a directory 26 External audio sources 38 Selecting tracks linde eene 26 Switching the AUX input on off 38 Fast searching audible 27 Naming the AUX input 39 Scanning tracks SCAN 27 Random track play MIX 27 Entering the power on Repeating individual tracks or message eee 40 who
36. m displays a scrolling message in the display The factory default for this text is BLAUPUNKT THE ADVAN TAGE IN YOUR CAR Instead of this you can enter your own text up to 35 characters long Press the MENU button 9 O Press the softkey assigned to the VARIOUS display item O Press the softkey assigned to the ON MSG display item The default text for the power on mes sage appears in the display The text input marker flashes at the beginning of the line To enter a different text press the joystick 8 to the left or right to move the input marker O Enter the letter that you want by pressing the joystick 8 up or down O Once you have finished entering the message press the joystick OK 8 or the MENU button 9 to close the menu The settings are saved 40 Displaying the serial number You can display the device s serial number Press the MENU button 9 O Press the softkey 6 assigned to the VARIOUS display item O Press the softkey 6 assigned to the SER NUM display item The device s serial number will be dis played in the top line of the display O Press the joystick OK 8 or the MENU button 9 to close the menu O BLAUPUNKT RESETTING SPECIFICATIONS Resetting the device Specifications You can reset the device to its factory Amplifier default settings All custom settings will Output power 4 x 18 watts sine then be cleared at 14
37. mo mode Theft protection Detachable control panel Your device is equipped with a detach able control panel flip release panel as a theft protection measure The device is worthless to a thief with out this control panel Protect your de vice against theft by taking the control panel with you whenever you leave your vehicle Do not leave the control panel inside your vehicle not even in a hid ing place The control panel has been designed to be easy to use Note e Never drop the control panel e Never expose the control panel to direct sunlight or other heat sourc es e Store the control panel in the sup plied case e Avoid direct skin contact with the control panel s electrical contacts If necessary clean the contacts with a lint free cloth and some alcohol Detaching the control panel O Press the S button 3 The control panel latch mechanism opens BLAUPUNKT THEFT PROTECTION SWITCHING ON OFF O First pull the control panel straight off the device and then out towards the left e The device switches off after the control panel is detached e All the current settings are saved e Any CD already inserted in the de vice remains there Attaching the control panel O Slide the control panel from left to right into the device s guide O Press the left edge of the control panel into the device until it clicks into place Note e When attaching the control p
38. ontrol The RC 08 RC 10 or RC 10H remote controls available as optional accesso ries allow you to access most of the main functions of your car sound sys tem safely and conveniently You cannot switch the device on off us ing the remote control Amplifiers You can use all Blaupunkt and Velocity amplifiers ENGLISH NOTES AND ACCESSORIES THEFT PROTECTION CD changers You can obtain the following CD chang ers from accessory retailers for connec tion to this device CDC A03 CDC A 08 and IDC A 09 Compact Drive MP3 You can connect the Compact Drive MP3 instead of a CD changer in order to play MP3 music tracks If you decide to connect a Compact Drive MP3 you will first need to use a computer to store the MP3 music tracks on the Micro drive hard disk that is inside the Com pact Drive MP3 Then when the Com pact Drive MP3 is connected to the car sound system you can play the tracks like normal CD music tracks The Compact Drive MP3 is operated in a similar way to a CD changer Most of the CD changer functions can also be used with the Compact Drive MP3 Activating deactivating demo mode The device is supplied from the factory with demo mode activated The various functions of the device are displayed graphically as animations in the display during demo mode You can also deac tivate demo mode O Press and hold down the MENU button 9 for longer than four sec onds to activate deactivate de
39. our tastes you can mix a colour yourself using the three primary colours red blue and green Press the MENU button 9 O Press the softkey assigned to the DISPLAY display item BLAUPUNKT ADJUSTING THE DISPLAY SETTINGS O Press the softkey assigned to the COLOR display item O Press the softkey assigned to the USER display item gt In the following menu you can set the red blue and green colour components yourself To do so press the appropriate softkey 6 repeatedly until the displayed col our suits your tastes Press the joystick OK 8 or the MENU button 2 to close the menu The settings are saved Selecting a display illumination colour during a colour scan Press the MENU button 9 O Press the softkey assigned to the DISPLAY display item O Press the softkey assigned to the COLOR display item O Press the softkey assigned to the COL SCAN display item The device starts changing the display illumination colour f you want to select one of the col ours press the softkey 6 as signed to the SAVE display item If you want to switch back to the previous menu without changing the colour press the softkey 5 as signed to the BREAK display item BLAUPUNKT Press the joystick OK 8 or the MENU button 9 to close the menu The settings are saved Configuring the spectrum analyser Th
40. ove the joystick 8 up right or down left to adjust the right left vol ume distribution When you have finished making your changes press the joystick OK 8 or the AUDIO button 10 Adjusting the front back volume distribution fader To adjust the fader press the AU DIO button 10 AUDIO MENU appears in the display O Press the softkey assigned to the FADER display item Move the joystick 8 up right or down left to adjust the front back volume distribution When you have finished making your changes press the joystick OK 8 or the AUDIO button 10 O BLAUPUNKT X BASS ADJUSTING THE DISPLAY SETTINGS X BASS Adjusting the display The X BASS feature can be used to Settings boost the bass at low volume levels You can set the X Bass boost for one of the following frequencies 32 Hz 40 Hz 50 Hz 63 Hz or 80 Hz in steps from O 6 If you select the 0 setting the X Bass function will be deactivated Press the AUDIO button o AUDIO MENU appears in the display O Press the softkey assigned to the X BASS display item Move the joystick 8 left or right to select the frequency that you want to boost Move the joystick 8 up to boost the X BASS or move it down to re duce the X BASS When you have finished making your changes press the joystick OK 8 or the AUDIO button 10 BLAUPUNKT You can adjust the display settings
41. r longer than two seconds to assign the station to that softkey BLAUPUNKT Storing stations automatically Travelstore You can automatically store the six sta tions offering the best reception in the region The stations are stored in the FMT or AMT memory bank Note Any stations that were previously stored in this memory bank are deleted in the process Starting the Travelstore function O Press the TUNER button 13 while in radio mode The radio functions menu appears in the display O Press the softkey assigned to the T STORE display item The storing procedure begins TRAV EL STORE appears in the display After the process is completed the ra dio will play the station that is stored in location 1 of the FMT or AMT memory bank Listening to stored stations O Select the memory bank or wave band Press the softkey 5 that is as signed to the station name or fre quency of the station that you want to listen to 19 ENGLISH RADIO MODE Programme type PTY Besides transmitting the station name some FM stations also provide informa tion on the type of programme that they are broadcasting Your car radio can receive and display this information For example the programme types can be CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS You can use the PTY function to select stations of a particular programme type Note If the tuner
42. radio mode The radio functions menu appears in the display O Repeatedly press the softkey assigned to the R TEXT display item until the RADIO TEXT ON or RADIO TEXT OFF setting that you want is displayed O Press the TUNER button 13 or the joystick OK 8 The settings are saved ENGLISH 21 CD MODE CD mode You can use this device to play stand ard CDs with a diameter of 12 cm CD Rs and CD RWs CDs that you have burned yourself can generally also be played Due to the varying quality of CD blanks Blaupunkt cannot guarantee that this will work properly To avoid problems when playing CDs you should not burn CDs at speeds greater than 16 speed To ensure the system functions proper ly only use CDs labelled with the com pact disc logo Problems might be ex perienced when trying to play copy pro tected CDs Blaupunkt cannot guaran tee the proper functioning of copy pro tected CDs fy Risk of severe damage to the CD drive CD singles with a diame ter of 8 cm and non circular con toured CDs shape CDs must not be used We accept no responsibili ty for any damage to the CD drive that may occur as a result of the use of unsuitable CDs Switching to CD mode and inserting a CD e f there is no CD inserted in the de vice yet 0 press the lx button 7 The control panel opens out towards you O Insert the CD with the printed side uppermost into the CD compart m
43. ries are allowed BLAUPUNKT MP3 MODE Fig 1 Fig 2 Dot Dot T001 D02 T002 T003 1008 D03 D04 T008 FTO rooi Toot E LT002 T002 Eire FT003 FTOOS glor FTO04 T004 E T005 FT005 T006 T007 e 1001 tHro10 Too2 LT T003 T004 T005 T006 LT007 Since using some burner software can lead to inconsistencies in the way items are numbered you should ensure that the root directory DO1 either contains only subdirectories containing tracks Fig 1 or only tracks Fig 2 You can name each directory using a PC The device is capable of displaying the directory name Name the directo ries and tracks using your CD burner software The software s instruction manual will provide details on how to do this BLAUPUNKT Note e When naming directories and tracks you should avoid using ac cents and special characters If you like your files to be in the correct order you should use burner software that places files in alohanumerical or der If your software does not provide this feature you also have the option of sorting the files manually To do so you should place a number e g 001 002 etc at the beginning of each file name you must include the leading zeros MP3 tracks can contain additional in formation such as the artist album and track names ID3 tags This device can display version 1 ID3 tags
44. the AUDIO button 10 to close the menu The settings are saved Note The optimum setting for the speed de pendent volume adjustment feature depends on how noise levels develop in your particular vehicle You will need to test various settings in order to find out which is best suited to your vehicle 11 ENGLISH SOUND AND VOLUME DISTRIBUTION SETTINGS Sound and volume distribution settings Note You can adjust the bass and treble indi vidually for each audio source Adjusting the bass Press the AUDIO button o AUDIO MENU appears in the display O Press the softkey assigned to the BASS display item Move the joystick 8 up right to boost the bass or move it down left to reduce the bass When you have finished making your changes press the joystick OK 8 or the AUDIO button 10 Adjusting the treble Press the AUDIO button o AUDIO MENU appears in the display O Press the softkey assigned to the TREBLE display item Move the joystick 8 up right to boost the treble or move it down left to reduce the treble When you have finished making your changes press the joystick OK 8 or the AUDIO button 10 Adjusting the right left volume distribution balance O To adjust the balance press the AUDIO button 10 AUDIO MENU appears in the display O Press the softkey assigned to the BALANCE display item M
45. the de vice s button illumination You can choose from 16 colours on the Los Angeles and 3 on the Seattle Press the MENU button 9 O Press the softkey assigned to the DISPLAY display item O Press the softkey 6 assigned to the KEYCOLOR display item Move the joystick 8 up right or down left to adjust the colour A different colour is selected every time you move the joystick Press the joystick OK 8 or the MENU button 9 to close the menu The settings are saved 14 Setting the display illumination colour only Los Angeles MP74 When setting the display illumination you can choose one of four preset col ours or mix a colour yourself from the RGB spectrum red green blue or se lect a colour during a colour scan Selecting a preset colour Four different colours are already stored in the device Ocean blue Amber Sunset red orange and Nature green are available Select a colour that best suits your vehicle interior Press the MENU button 9 O Press the softkey assigned to the DISPLAY display item O Press the softkey assigned to the COLOR display item O Press the softkey assigned to the display item of the colour that you want Press the joystick OK 8 or the MENU button 9 to close the menu The settings are saved Mixing a colour for the display illumination To customise the display illumination to Suit y
46. the softkey assigned to the USER display item O Press the softkey assigned to the display item of the equalizer EQ 1 EQ 2 or EQ 3 whose settings you want to change O Press the softkey assigned to the display item of the equalizer band LOW1 LOW2 HIGH1 HIGH2 or HIGH3 whose setting you want to change The top line displays the frequency in Hz the level in dB and the quality factor Q To select the frequency gt repeatedly press the joystick 8 to the left or right until the frequency flashes C Adjust the frequency that you want to change by pressing the joystick 8 up or down To adjust the level C repeatedly press the joystick 8 to the left or right until the level dis played in front of dB flashes Adjust the level for the frequency by pressing the joystick 8 up or down 36 You can use the quality factor to adjust the width of the filter The higher you set the value for the quality factor the more directly the filter will be applied to the selected frequency To adjust the quality factor O repeatedly press the joystick 8 to the left or right until the quality fac tor displayed after Q flashes Adjust the quality factor by press ing the joystick 8 up or down Note Proceed in the same way with all the frequencies that you want to adjust Press the joystick OK 8 or the AUDIO button 10 to
47. tion name appears in the dis play as soon as the tuner receives it You can optionally display the pro gramme type For further details please read the section entitled Programme type PTY Adjusting the tuner settings To ensure that the tuner works proper ly the device must be configured for the region in which you are using it You can choose between Europe Asia Gulf States AREA EUR and North South America AREA USA If you experience problems with radio reception please check this setting Press the MENU button 9 O Press the softkey assigned to the TUNER display item O Press the softkey assigned to the display item of the region that you want AREA EUR or AREA USA Press the joystick OK 8 or the MENU button 9 to close the menu The settings are saved O BLAUPUNKT RADIO MODE Switching to radio mode If you are in CD MP3 mode or CD changer Compact Drive MP3 mode press the TUNER button 13 The main radio menu for tuning into a station is displayed You can control the radio mode functions in the radio func tions menu You can open the radio functions menu by pressing the TUN ER button 13 again while in radio mode RDS function The RDS function extends your radio s range of functions only in FM radio mode If the RDS function is activated the device automatically tunes into the best receivable frequency for the sta tion that is c
48. to suit the installation position in your ve hicle and your own preferences ENGLISH Adjusting the viewing angle Press the MENU button 9 O Press the softkey 6 assigned to the DISPLAY display item O Press the softkey assigned to the ANGLE display item Move the joystick 8 up right or down left to adjust the viewing an ale Press the joystick OK 8 or the MENU button 9 to close the menu The settings are saved Adjusting the display brightness If your car sound system is connected as described in the installation instruc tions the display brightness will change when the headlights are turned on off The display brightness can be adjusted separately for night and day in steps ranging from 1 16 Daytime display brightness Press the MENU button 9 O Press the softkey assigned to the DISPLAY display item O Press the softkey assigned to the BRIGHT display item 13 ADJUSTING THE DISPLAY SETTINGS DAY and NIGHT are displayed in the top display line together with the cur rently set values Move the flashing selection marker behind DAY or NIGHT by pressing the joystick 8 to the left or right O Set the value that you want To do so move the joystick 8 down or up Press the joystick OK 8 or the MENU button 2 to close the menu The settings are saved Setting the button illumination colour You can choose the colour of
49. urrently set Switching the RDS function on off To use the RDS function O press the TUNER button 13 while in radio mode The radio functions menu appears in the display Repeatedly press the softkey assigned to the RDS display item until the RDS ON or RDS OFF setting that you want is displayed To return to the main radio menu press the TUNER button 13 or the joystick OK 8 The settings are saved BLAUPUNKT Selecting the waveband memory bank You can use this device to receive pro grammes broadcast over the FM and AM wavebands There are four memo ry banks for the FM waveband and three memory banks for the AM waveband Six stations can be stored in each mem ory bank Selecting the waveband To select the FM or AM waveband press the TUNER button 13 while in radio mode The radio functions menu appears in the display O Press the softkey 6 assigned to the BAND display item O Press the softkey assigned to the FM display item for the FM waveband O Press the softkey assigned to the AM display item for the AM waveband The main radio menu for the selected waveband is displayed Selecting the memory bank To switch between the memory banks FM1 FM2 FM3 FMT or AM1 AM2 AMT press the NEXT button 4 repeat edly until the memory bank that you want is displayed The memory banks are accessed in the following order
50. xtraneous noise will distort the measured values Note During calibration the temperature in side the vehicle must not exceed 55 C since this could lead to falsified meas urements The sound radiating from the loud speakers must not be obstructed by any objects All the loudspeakers must be connected The microphone must be connected to the device The microphone that you need is sup plied with the Los Angeles MP74 If you have a Seattle MP74 you can obtain the microphone from retailers To calibrate an equalizer O press and hold down the AUDIO button 10 for longer than two sec onds O Press the softkey assigned to the USER EQ display item O Press the softkey assigned to the display item of the equalizer EQ 1 EQ 2 or EQ 3 that you want to set up O Press the softkey assigned to the AUTO display item A countdown is shown in the display Afterwards you will hear a test sound and calibration begins Note Follow the instructions shown in the dis play during calibration O Proceed as described for all the equalizers BLAUPUNKT EQUALIZER Selecting an equalizer After calibration has taken place or af ter you have finished making manual adjustments C press and hold down the AUDIO button 10 for longer than two sec onds O Press the softkey assigned to the USER EQ display item C Select one of the equalizers EQ1
Download Pdf Manuals
Related Search