Black & Decker DV60XXY User's Manual
Contents
1. Wash the filters in warm soapy water fig K The dust collector 2 can also be washed if necessary Warning Do not immerse the appliance in water Make sure that the dust collector 2 and the filters 10 amp 11 are dry Refit the filters 10 amp 11 on to the appliance twisting them counter clockwise until they lock into place Refit the dust collector 2 onto the appliance Make sure that the dust collector clicks into place Warning Never use the appliance without the filters Optimum dust collection will only be achieved with clean filters Replacing the filters The filters should be replaced every 6 to 9 months and whenever worn or damaged Replacement filters are available from your Black amp Decker dealer cat no VF70 VF80 for HEPA filters Remove the old filters as described above Fit the new filters as described above Storing the accessories fig L amp M Press the accessories into the corresponding holders until they click into place Protecting the environment Separate collection This product must not be disposed of with normal household waste Should you find one day that your appliance needs replacement or if it is of no further use to you think of the protection of the environment Black amp Decker repair agents will accept old Black amp Decker tools and ensure that they are disposed of in an environmentally safe way Separate colle2. A BLACKS DECKER New Zealand BJ 8 DE DV6005 DV7205 DV1205 Intended use Your Black amp Decker Dustbuster hand held vacuum cleaner has been designed for light dry vacuum cleaning purposes This appliance is intended for household use only Design and Patent information EC Design Registration Numbers 607643 0001 607668 0001 607650 0001 Safety instructions Warning When using battery powered appliances basic safety precautions including the following should always be followed to reduce the risk of fire leaking batteries personal injury and material damage Read all of this manual carefully before using the appliance The intended use is described in this manual The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury Retain this manual for future reference Using your appliance Do not use the appliance to pick up liquids or any materials that could catch fire Donotuse the appliance near water Do not immerse the appliance in water Never pull the charger lead to disconnect the charger from the socket Keep the charger lead away from heat oil and sharp edges This
3. appliance is notintended for use by young or infirm persons without supervision Children must be supervised to ensure they do not play with the appliance After use Unplug the charger before cleaning the charger or charging base When not in use the appliance should be stored in a dry place Children should not have access to stored appliances Inspection and repairs Before use check the appliance for damaged or defective parts Check for breakage of parts damage to switches and any other conditions that may affect its operation Do not use the appliance if any part is damaged or defective Have any damaged or defective parts repaired or replaced by an authorized repair agent Regularly check the charger lead for damage Replace the charger if the lead is damaged or defective Never attempt to remove or replace any parts other than those specified in this manual Battery and charger Never attempt to open the battery Do not expose the battery to water Do not incinerate the battery Do not expose the charging base to water Do not open the charging base Electrical safety Your charger has been designed for a specific voltage Always check that the mains voltage corresponds to the voltage on the rating plate Never attempt to replace the charger unit with a regular mains plug Symbols on the charger Read all of this manual carefully Your charger is double insulated there
4. ction of used e products and packaging allows materials to be recycled and used again Re use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials Local regulations may provide for separate collection of electrical products from the household at municipal waste sites or by the retailer when you purchase a new product Black 8 Decker provides a facility for the collection and recycling of Black 8 Decker products once they have reached the end of their working life To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf You can check the location of your nearest authorised repair agent by contacting your local Black amp Decker Office at the address indicated in this manual Alternatively a list of authorised Black amp Decker repair agents and full details of our after sales service and contacts are available on the Internet at www ZhelpU com Battery fig N Ifyou want to dispose of the product yourself the battery must be removed as described below and disposed of in accordance with local regulations Preferably discharge the battery by operating the appliance until the motor stops Press the release button 3 and remove the dust collector 2 Remove the filters 10 amp 11 by twisting them clockwise fig J Remove the seven screws holding the body of the appliance togeth
5. er Pull the cover half away from the location half For catalogue numbers DV60XXY 8 DV72XXY A lift out the full motor fan battery assembly For catalogue numbers DV96XXY amp DV12XXY prise the small cover from the filter cleaning slider and remove the slider securing screw lift out the full motor fan battery assembly Unplug the battery assembly from the main assembly Place the battery in a suitable packaging to ensure that the terminals cannot be short circuited Take the battery to your service agent or to a local recycling station Once removed the battery cannot be refitted o MA Technical data DV60XXY DV72XXY Voltage Vdc 6 0 7 2 Battery NiCd NiMH NiCd NiMH type Weight kg 0 9 1 0 DV96XXY DV12XXY Voltage Vdc 9 6 12 0 Battery NiCd NiMH NiCd NiMH type Weight kg 1 3 1 4 Charger Input voltage Vac 230 Approx charging time h 16 minimum EC declaration of conformity DV60XXY DV72XXY DV96XXY DV12XXY Black amp Decker declares that these products conform to 2006 95 EC EN 55014 EN60335 EN 61000 Level of sound pressure measured according to EN60704 1 lt 70 dB A deat Kevin Hewitt Director of Consumer Engineering Spennymoor County Durham DL16 6JG United Kingdom 22 08 2007 Guarantee Black amp Decker is confident of the quality of its products and offers an outstanding guarantee This guarantee statementis in addit
6. ffers Further information on the Black amp Decker brand and our range of products is available at www blackanddecker co uk 20 0 60 wos ndieyzmmm eposta S0OZZAA SOO9AG SAINA M L0 0 60 wos ndiayzimmm en SOZLAC SO96AG INU y L dAL Australia Black amp Decker Australia Pty Ltd Tel 03 8720 5100 20 Fletcher Road Mooroolbark Fax 03 9727 594065 Victoria 3138 New Zealand Black amp Decker Tel 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose Auckland New Zealand United Kingdom Black amp Decker Tel 01753 511234 210 Bath Road Fax 01753 551155 90526106 Slough Berkshire SL1 3YD Helpline 01753 574277 09 07
7. fore no earth wire is required Fail safe isolating transformer The mains supply is electrically separated from the transformer output El The charger automatically shuts off if the ambient temperature becomes too high As a consequence the charger will be inoperable The charging base must be disconnected from the mains supply and taken to an authorised service centre for repair The charging base is intended for indoor use only 130 C Features 1 Dust collector extension 2 Dust collector 3 Release button 4 On Off switch two speed switch DV1205 Charging indicator 6 Filter cleaning button DV1205 amp DV9605 7 Charging base Fig A 8 Crevice tool 9 Brush tool Identifying your product The model design can be determined from the suffix codes used in the catalogue number The following catalogue numbers are described in this manual DV60XXY DV72XXY DV96XXY DV12XXY The suffix code XX corresponds to the following designs 05 All units supplied with a small crevice tool and a brush tool The suffix code Y is used to identify the range of colour finish options The suffix code Y represented by the letter N is used for models fitted with a NiMH battery The suffix code Y represented by the letter H is used for models fitted with a HEPA filter lt i Installation Fitting the charging base to the wall The charging base can be placed on a work
8. ion to and in no way prejudices your statutory rights The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area If a Black amp Decker product becomes defective due to faulty materials workmanship or lack of conformity within 24 months from the date of purchase Black amp Decker guarantees to replace defective parts repair products subjected to fair wear and tear or replace such products to make sure of the minimum inconvenience to the customer unless The product has been used for trade professional or hire purposes The product has been subjected to misuse or neglect The product has sustained damage through foreign objects substances or accidents Repairs have been attempted by persons other than authorised repair agents or Black amp Decker service staff To claim on the guarantee you will need to submit proof of purchase to the seller or an authorised repair agent You can check the location of your nearest authorised repair agent by contacting your local Black amp Decker office at the address indicated in this manual Alternatively a list of authorised Black 8 Decker repair agents and full details of our after sales service and contacts are available on the Internet at www 2helpU com Please visit our website www blackanddecker co uk to register your new Black amp Decker product and to be kept up to date on new products and special o
9. rger indefinitely The charging indicator 5 will be lit as long as the appliance is connected to the plugged in charger Warning Do not charge the battery at ambient temperatures below 4 C or above 40 C Adjusting the dust collector fig D Extend the dust collector 2 by pulling the dust collector extension 1 until it locks into position Retract the dust collector extension 1 by pressing the area 12 marked with an arrow and pushing the dust collector extension 1 back into the dust collector 2 Switching on and off fig E amp F To switch the appliance on slide the on off switch 4 forward To switch the appliance off slide the on off switch 4 back DV1205 amp DV9605 Optimising the suction force fig G In order to keep the suction force optimised the filters must be cleared regularly during use Slide the filter cleaning button 6 up and down a few times to shake out dust clogging the filters 10 amp 11 Cleaning and maintenance Warning Regularly clean the filters 10 amp 11 Cleaning the dust collector and filters fig H K The filters are re usable and should be cleaned regularly Press the release button 3 and remove the dust collector 2 Empty the dust collector 2 fig Remove the filters 10 amp 11 by twisting them clockwise fig J Separate the filters 10 amp 11 Brush any loose dust from the filters 10 amp 11
10. top or fitted to the wall to provide a convenient storage and charging point for the appliance When fixing to a wall make sure that the fixing method is suitable for the wall type and is appropriate to the weight of the appliance Assembly Fitting the accessories fig A amp B These models are supplied with some or all of the following accessories A crevice tool 8 for confined spaces A brush tool 9 for furniture and stairs To fit an accessory proceed as follows Take the accessories from its storage position on the appliance or charging base 7 fig L amp M Insert the appropriate accessory into the front of the appliance Use Before first use the battery must be charged for at least 16 hours Place the appliance on the charging base whenever it is not in use Charging the battery fig C Before charging the battery Make sure that the dust collector extension 1 is pushed back into the dust collector 2 Make sure that the appliance is switched off The battery will not be charged with the on off switch 4 in the on position Place the appliance on the charging base 7 as shown Plugin the charger Switch on at the mains The charging indicator 5 will be lit Leave the appliance to charge for at least 16 hours MA While charging the charger may become warm This is normal and does not indicate a problem The appliance can be left connected to the cha
Download Pdf Manuals
Related Search