ATD Tools Drill ATD-2143 User's Manual
Contents
1. ATD AIR ATD 2143 3 8 REVERSIBLE AIR DRILL WITH KEYLESS CHUCK A WARNING ALWAYS READ 9 INSTRUCTIONS BEFORE USING POWER TOOLS A WARNING Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to cause cancer birth defects or other reproductive harm Some examples of these chemicals are A WARNING e MAXIMUM RPM OF 1 800 e ALWAYS WEAR APPROVED EAR AND EYE PROTECTION e ALWAYS OPERATE AT MAX AIR PRESSURE OF 90 PSIG 6 2 BAR e REPETITIVE MOTION EXTENDED EXPOSURE TO VIBRATION MAY HARM HANDS ARMS e ACCESSORY USED MUST BE RATED HIGHER THAN 1 800 RPM THIS INSTRUCTION MANUAL CONTAINS IMPORTANT SAFETY INFORMATION READ CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING THIS TOOL SAVE THIS MANUAL FOR FUTURE REFERENCE e lead from lead based paints e crystalline silica from bricks and cement and other masonry products and e arsenic and chromium from SPECIFICATIONS chemically treated lumber Free Speed n a C O n 1 800 RPM Air Inlet 1 4 18 NPT Hose Size 3 8 I D 90 psig 6 2 bar Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work Rec Air Pressure in a well ventilated area and work ATD 2143 Avg Air Consumption 3 92 cfm Sound Level Shipping Weight ME 3 4 Lbs with approved safety equi2. consumer We will repair any air tool covered under this warranty which proves to be defective in material or workmanship during the warranty period In order to have your tool repaired return the tool to any authorized ATD Warranty Center freight prepaid Please include a copy of your proof of purchase and a brief description of the problem The tool will be inspected and if any part or parts are found to be defective in material or workmanship they will be repaired free of charge and the repaired tool will be returned to you freight prepaid This warranty gives you specific rights You may also have other rights which vary from state to state The foregoing obligation is ATD Tools sole liability under this or any implied warranty and under no circumstances shall ATD Tools be liable for any incidental or consequential damages Note Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you ATD 2143 3 Rev 3 19 09 ATD 2143 3 8 Reversible Air Drill with Keyless Chuck Ref No Part No Description Qty Ref No Part No Description Qty 1 RS13001ATD Housing 1 18 RS13018 End Plate 1 2 RS13002 O Ring 2 19 RS13019 Rotor 1 3 RS13003 O Ring 1 20 RS13020 Rotor Blade 5 4 RS13004 Valve Stem 1 21 RS13021 Cylinder 1 5 RS13005 O Ring 1 22 RS13022 Pin 1 6 RS13006 Bushing 1 23 RS13023 Front Plat
3. occur if neckwear is not kept away from tool and accessories Drill bits can bind suddenly and cause rotation of the work piece or tool causing injury to arms and or shoulders Enough torque is generated to cause falls Always use sharp bits Use less downward pressure at breakthrough Do not lubricate tools with flammable or volatile liquids such as kerosene diesel or jet fuel Don t force tool beyond its rated capacity Do not remove any labels Replace any damaged labels Use accessories recommended by ATD Tools Rev 3 19 09 Operating Instructions Whip Hose Do Not Install Quick Coupling Here Nipple Nipple Leader Hose We N Quick Coupler Warning Information Parts Breakdown Air Supply Filter AA i Oiler Regulator Drain Daily Air Supply Tools of this class operate on a wide range of air pressures It is recommended that air pressure of these tools measures 90 PSI at the tool while running free Higher pressure over 90 psig 6 2 bar raises performance beyond the rated capacity of the tool which will shorten the tool s life because of faster wear and could cause injury Always use clean dry air Dust corrosive fumes and or water in the air line will cause damage to the tool Drain the air tank daily Clean the air inlet filter scree
4. on this tool Failure to do so could result in injury Whip hoses can cause serious injury Always check for damaged frayed or loose hoses and fittings and replace immediately Do not use quick detach couplings at tool See instructions for correct set up Air powered tools can vibrate in use Vibration repetitive motions or uncomfortable positions over extended periods of time may be harmful to your hands and arms Discontinue use of tool if discomfort tingling feeling or pain occurs Seek medical advice before resuming use ATD 2143 Place the tool on the work before starting the tool Do not point or indulge in any horseplay with this tool Slipping tripping and or falling while operating air tools can be a major cause of serious injury or death Be aware of excess hose left on the walking or work surface Keep body working stance balanced and firm Do not overreach when operating the tool Anticipate and be alert for sudden changes in motion during start up and operation of any power tool Do not carry tool by the hose Protect the hose from sharp objects and heat Tool shaft may continue to rotate briefly after throttle is released Avoid direct contact with accessories during and after use Gloves will reduce the risk of cuts or burns Keep away from rotating end of tool Do not wear jewelry or loose clothing Secure long hair Scalping can occur if hair is not kept away from tool and fa accessories Choking can
5. e 1 7 RS13007 O Ring 1 24 RS13024 Washer 1 8 RS13008 Reverse Lever 1 25 RS13025 Gear 3 9 RS13009 Spring 1 26 Pin included with 27 3 10 RS13010 Trigger 1 27 RS13027A Work Spindle with Pins 1 11 RS13011 Screw 1 28 RS13028 Thread Gear Ring 1 12 RS13012 Pin 1 29 RS21114 Bearing 2 13 RS13013 Muffler Cover 1 30 RS13030 Clamp Nut 1 14 RS13014 Screw 2 31 RS13031 Washer 1 15 RS13015 Air Inlet 1 32 RS79535 Chuck 1 16 RS13016 Rear Gasket 1 33 RS13033 Chuck Screw 1 17 RS21114 Bearing 2 ATD 2143 4 Rev 3 19 09
6. n on at least a weekly schedule The recommended hookup procedure can be viewed in the above figure The air inlet used for connecting air supply has standard 1 4 NPT Line pressure should be increased to compensate for unusually long air hoses over 25 feet Minimum hose diameter should be 3 8 I D and fittings should have the same inside dimensions and be tightly secured Warranty Operating Instructions Locate center of new hole by using a center punch Place drill bit tip in punch mark Hold drill square with work and start motor Apply steady even pressure Do not force Too much pressure can cause bit from butting and cause it to overheat Reduce pressure just before bit cuts through the work When bit has penetrated work and is spinning freely taki it from the work while the motor is running then turn off drill If the drill jams in the work release throttle immediately Disconnect the drill before removing bit and determining cause of trouble Do not attempt to free the bit by starting and stopping the motor Lubrication amp Maintenance Lubricate the air motor daily with quality air tool oil If no air line oiler is used run 1 2 oz of oil through the tool The oil can be squirted into the tool air inlet or into the hose at the nearest connection to the air supply then run the tool Overfilling will cause a reduction in the power of the tool ATD Tools warrants its air tools for a period of 1 year to the
7. pment such as those dust masks that are specially designed to filter out microscopic particles Rev 3 19 09 AWARNING FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY THIS INSTRUCTION MANUAL CONTAINS IMPORTANT SAFETY INFORMATION READ THIS INSTRUCTION MANUAL CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING THIS TOOL Always operate inspect and maintain this tool in accordance with American National Standards Institute Safety Code of Portable Air Tools ANSI B186 1 and any other applicable safety codes and regulations For safety top performance and maximum durability of parts operate this tool at 90 psig 6 2 bar max air pressure with 3 8 diameter air supply hose Always wear impact resistant eye and face protection when operating or performing maintenance on this tool Always wear hearing protection when using this tool High sound levels can cause permanent hearing loss Use hearing protection as recommended by your employer or OSHA regulation Keep the tool in efficient operating condition Operators and maintenance personnel must be physically able to handle the bulk weight and power of this tool Air under pressure can cause severe injury Never direct air at yourself or others Always turn off the air supply drain hose of air pressure and detach m tool from air supply before installing removing or adjusting any accessory on this tool or before performing any maintenance
Download Pdf Manuals
Related Search