American DJ Scotty II User's Manual
Contents
1. For Master Slave operation link two or more units then turn down the sensitivity of the slave units Be sure not to obstruct the cooling vents and keep in a well ventilated area For best results use fog or special effects smoke to enhance the beam output Linking To link the units together use standard XLR mic cables Up to four units can be linked together Any unit can act as a master or slave Remember that the male XLR connection is the Input and the female XLR is the Output Follow figure one to ensure proper connectivity CAUTION The front part of fixture will get extremely hot if operated for long periods For optimum performance use a 30 min ON 10 min OFF duty cycle Let the unit cool before handling or replacing lamps Never open this unit when in use Always disconnect the main power before serving or replacing lamp Please fill out the warranty card to validate and activate your 3 year limited warranty on the Scotty II Lamp replacement Remember to always replace with the exact same type lamps and fuse unless otherwise specified by an authorized American DJ service technician This unit comes with four lamps all are located behind the front lens assembly To replace the lamps disconnect the unit s main power Remove the front lens assembly to expose the lamps Remove the old lamps and replace with alike lamps Replace the lens assembly and reconnect main power HALOGEN LAMP WARNING This fixture is fitted with halogen lamps2. User Instructions No Moving Parts 3 Year Warranty American DJ Supply American DJ World Headquarters 4295 Charter Street Los Angeles CA 90058 USA Tel 323 582 2650 Fax 323 582 2610 web www americandj com e mail info americandj com INTRODUCTION Thank you for purchasing the Scotty II by American DJe For your conve nience this unit has been lamped and is ready to be used there is no assembly required Please read the following instructions before installing or using your new unit The Scotty Il s appearance and effect is similar to our popular Vertigo but has no motors or moving parts inside which increases its reliability This unit features a built in four channel sound active chaser illuminating the four internal lamps This unit is Master Slave compatible which means you may link several units together for a synchronized light show For an optimum effect link up to four Scotty Ils together for dramatic light show OPERATING INSTRUCTIONS The Scotty II is ready to be hung or set on flat surface After plugging the unit in it will react to the low frequencies of a music source bass via the unit s internal microphone The unit comes with a sensitivity adjusting knob on the rear of the unit Use the sensitivity knob to control the amount of sound it takes to activate your unit Turn the knob in clockwise direction for full sensitivity and counter clockwise to decrease the unit sensitivity to sound
3. which are highly susceptible to damage if improperly handled Never touch lamp with bare fingers as the oil from your hands will shorten lamp life Also never move fixture until lamp has had ample time to cool Remember lamps are not covered under warranty conditions For service related issue please contact your American DJe dealer SPECIFICATIONS MODEL SCOTTY II ee Weight 8 Ibs Size 14 x 12 x 12 XLR MALE SOCKET Lamps 2 x 64514 120V 300W HOT 3 1 EARTH 2 x FCL 120V 500W Fuse 10A Supply Voltage 120V Working Position Any Safe position Duty Cycle 30 min ON 10 min OFF Colors Multiple Colored 2 Cold DATA IN CAmerican DY Los Angeles CA 90058 e www americandj com Scotty II User Instructions Page 2
Download Pdf Manuals
Related Search