Amana ART308FFDM Dimension Guide
Contents
1. 66 1 cm 167 3 cm 151 8 cm 120 psi 207 and 827 kPa Reverse Osmosis Water Supply If a reverse osmosis water filtration system is connected to your cold water supply the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi 276 to 414 kPa LOCATION REQUIREMENTS To ensure proper ventilation for your refrigerator allow for a 1 25 cm space on each and between overhead cabinets and refrigerator top Allow at least 1 2 5 cm between back of cabinet and the wall If your refrigerator has an ice maker make sure you leave some extra space at the back for the water line connections If you are installing your refrigerator next to a fixed wall leave 2 5 cm minimum on the hinge side depending on your model to allow for the door to swing open NOTE This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55 F 13 C to a maximum of 110 F 43 C The preferred room temperature range for optimum performance which reduces electricity usage and provides superior cooling is between 60 F 15 C and 90 F 32 C It is recommended that you do not install the refrigerator near a heat source such as an oven or radiator 2 5 08 cm Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only For complete details see Installation Ref W10684124 our pro2. Amana Top Mount Refrigerator PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS ART308FFD Electrical A 115 volt 60 Hz AC only 15 or 20 amp fused grounded electrical supply is required It is recommended that a separate circuit serving only your refrigerator be provided Use an outlet that cannot be turned off by a switch Do not use an extension cord NOTE Before performing any type of installation cleaning or removing a light bulb turn the control Thermostat Refrigerator or Freezer Control depending on the model to OFF and then disconnect the refrigerator from the electrical source When you are finished reconnect the refrigerator to the electrical source and reset the control Thermostat Refrigerator or Freezer Control depending on the model to the desired setting See Using the Controls Water A cold water supply with water pressure between 30 and 120 psi 207 and 827 kPa is required to Operate ice maker and water dispenser If you have questions about your water ae eles aaa Depth Cab Depth Cab Overall Depth Door p j Model Model Reversible With Door Width Cabinet Height Height Open 90 IMPORTANT The pressure of the water Number Size Door A B Only C D E p coming out of a reverse osmosis system going to the water inlet valve of the ART308FFD 18 2 cu ft Yes 31 29 2874 65 657 5974 refrigerator needs to be between 30 and 79 7 cm 75 6 cm 73 3 cm 1
3. ducts we reserve the right to change materials and specifications without notice Instructions packed with product Specifications subject to change without notice 10 29 14
Download Pdf Manuals
Related Search