AllerAir 8000 Series User's Manual
Contents
1. filters every two months HEPA filters every three to five years and carbon filters every two years STEP 4 Reach inside the unit and remove the felt pad STEP 8 Then insert the new carbon filter into the unit Step 12 Turn the unit back onto its wheels It is now ready for use2. REPLACE THE PRE FILTER Make sure the unit is set to off and the unit is unplugged Lay the unit on its side Slowly remove the dirty filter to avoid dispersing its contents Gently insert it into a plastic bag before discarding REPLACE CARBON amp HEPA FILTERS Insert the new filter by pressing it gently against the sides of the carbon filter inside the unit STEP 1 Make sure the unit is set to off and the unit is unplugged Lay the unit upside down so that the wheels face up STEP 5 First remove the carbon filter pull up gently by placing thumbs on the inner side of the filter Step 9 Put back the felt pad removed in STEP 4 STEP 2 Using a 2 Philips screwdriver remove the four screws that hold the base onto the unit STEP 6 Then remove the HEPA filter with the same technique Replace the base making sure the arrow on the gold sticker lines up with unit s rear seam STEP 3 Grasp the wheels Remove the base by pulling gently on the wheels STEP 7 Now gently insert the new HEPA filter Step 11 Replace the four screws FILTER REPLACEMENT INSTRUCTIONS 4000 5000 6000 amp 8000 SERIES AllerAir Industries Inc Toll Free 1888 852 8247 Fax 1 877 688 2193 www allerair com These replacement filters will extend the life of your AllerAir unit Please be sure to follow the instructions for changing the filters in your unit We recommend changing pre
Download Pdf Manuals
Related Search