Aiphone NHX NH-1SA-ACB-BLU User's Manual
Contents
1. down 5 To reset the CODE BLUE CALL move the blue call switch to the upper position Pa TOLL FREE TECHNICAL SUPPORT Aiphone Communication Systems 1700 130th Ave N E 800 692 0200 Bellevue WA 98005 Extensions 8107 8118 8111 425 455 0510 TOLL FREE FAX LINE eaea neee nei FAX 425 455 0071 800 832 3765 090104JS2. AIPHONE ne NHX Nurse Call System Nurse Call System NH 1SA AC BLU NH 1SA ACB BLU Code Blue Station NHR 7A CB1 NHR 7A CB2 Code Blue Call Switch INSTRUCTIONS The models listed above have been modified to allow the Blue Call button NHR 7A CB to activate the highest priority call on the NHX Nurse Call System When the Blue switch is pushed down to the lower position the master station will indicate the call with a fast intermittent call tone and flashing LED The call can be cancelled only by raising the switch to the upper position All other call levels remain the same WIRING DIAGRAM NH 1SA AC BLU Code Blue Sub CN1 Brn Red Trunk line Org output 1 Yel Grn Blu NHX 80X NHR 7A CB1 CN2 Code Blue Brn Red Trunk line Org output 2 Yel Grn Blu Pur PS 2420UL Gry Blk Wht Gry Red 2nd dry contact closure PS 2420UL Models NOTES e NHR 7A CB1 standard unit SPST 1 The NH 1SA ACB BLU wires the same as the station shown above NHR 7A CBz2 Includes second dry 2 NHR 7A CB1 is a Code Blue station includes one set of contacts SPST contact closure DPDT 3 The NHR 7A CB2 model includes two dry contact closures DPDT BRN wires 4 Black wire from NH 1SA AC BLU is only used in systems with All Call 5 See operational instructions for the system following on page two of this instruction sheet 6 Only wiring concerning the Code Blue stations is shown here Please see sta
3. ndard Installation Manual for complete information NH 1SA ACB BLU Instr Page 1 OPERATIONS The NHX system with CODE BLUE has three priority levels Priority 1 Code Blue Priority 2 Bath call and cord out Priority 3 Routine call 1 Code Blue call signal is a fast beep 1 per 0 5 seconds and flashing LED 1 per 0 4 seconds This signal is activated when the blue call switch on the NHR 7A CB1 is moved to the lower position and will continue until it s reset to the upper position 2 The Bath Cord out signal is a single beep 1 per 2 seconds and a double blinking LED 2 blinks every 1 8 seconds This signal is activated when the bath pull cord NHR 7A is moved to the lower position or when the handheld call button NHR 8A is pulled out of the station The call signal will remain until the master answers the call at which time the tone will be reset The blinking LED will remain until the bath station is reset to the upper position or the handheld call button is plugged back into the station 3 The Routine call signal is a single beep 1 per 6 seconds and a blinking LED 1 per 2 seconds This signal is activated when the button is pressed on the handheld call cord and is reset when the master station answers the call or when the CANCEL button on the patient station is pressed 4 To place a CODE BLUE CALL activate the Code Blue Station located near the patient station by pulling the attached cord or sliding the blue call switch
Download Pdf Manuals
Related Search