Home

Pyle Level Meter

1. PYLE PSPLO1 USER MANUAL www pyleaudio com 1 A Safety information Read the following safety information carefully before attempting to operate or service the meter Use the meter only as specified in this manual otherwise the protection provided by the meter may be impaired e Environment conditions Altitude up to 2000 meters Relatively humidity 90 max Operation Ambient 0 40 C O N gt Maintenance amp Clearing e Repairs or servicing not covered in this manual should only be performed by qualified personnel 2 Periodically wipe the case with a dry cloth Do not use abrasives or solvents on this instrument Safety symbols 0 Meter is protected throughout by double insulation or reinforced insulation When servicing use only specified replacement parts CE Comply with EMC II General Description Thank you for using our Sound Level Meter To ensure that you can get the most from it we recommend that you read and follow the manual carefully before use This Sound Level Meter has been designed to meet the measurement reguirements of safety Engineers Health Industrial safety offices and sound guality control in various environments e Ranges from 40dB to 1300B at frequencies between 31 5Hz and 4 KHz e Display with 0 1dB steps on a 4 digits LCD With one equivalent weighted sound pressure level C lll Specifications Frequency range 31 5Hz74 KHz Measuring level range 40 130dB Freque
2. PACK CAREFULLY IN ORIGINAL CARTON IF POSSIBLE WE ARE NOT RESPONSIBLE FOR DAMAGE INCURRED IN RETURNING ITEMS FOR REPAIR A LETTER STATING YOUR EXACT STREET ADDRES DAYTIME PHONE NUMBER AND THE PROBLEM YOU ARE EXPERIENCING SHOULD BE INCLUDED YOU MUST ALSO ENCLOSE A COPY OF THE ORIGINAL RECEIPT A SPROOF OF DATE OF PURCHASE
3. ncy weighting C Microphone 1 2 inch electret condenser microphone Display LCD Digital display 4 digits Resolution 0 1dB Display Up data 0 5 sec 3 Time weighting FAST 125mS Accuracy 3 5dB 1kHz 94dB under reference conditions Alarm function OVER is show when input is out of range gt 130dB Auto power off Meter automatically shuts down after approx 15 minutes of inactivity Power supply One 9V battery OO6P or IEC 6F22 or NEDA 1604 Operation temperature 0 to 40 C 32 to 104 F Operation humidity 10 to 90 RH Storage temperature 10 to 60 C 14 to 140 F Storage humidity 10 to 75 RH Dimensions 210 L X55 W X32 H mm 1359 including battery Weight 9V battery carrying case Instruction manual IV Name and Functions Windscreen 8 1 2 inch Electret Condenser microphone If you operate at wind speed over 10m sec please put protective accessories on microphone O MAXMIN button The max Hold position is used to measure the maximum level of sounds The maximum measured level is up dated continuously Press once again the button will release the hold and allow a further measurement Power ON OFF button Turn the meter power ON OFF l Backlight Sensor Automatic Turn the meter Backlight ON OFF O Digital LCD display 4 digits Resolution 0 1dB Display Up data 0 5 sec Battery Cover Open the battery cover to replacing new one 9V battery O Tripod n
4. ut Hold the instrument comfortably in fix on tripod V Measurement Preparation 1 Battery loading Remove the battery cover on the back and put in one 9V Battery 2 Battery Replacement When the battery voltage drops below the operating voltage mark BAT appears If it appears battery should be replaced with new one VI Operating Precautions 1 Wind blowing across the microphone would bring additional extraneous noise Once using the instrument in the presence of wind it is a must to mount the windscreen to not pick up undesirable signals 2 Do not store or operate the instrument at high temperature and high humidity environment 3 Keep microphone dry and avoid severe vibration 4 Please take the battery and keep the instrument in low humidity environment When not in use 6 VII Measurement 1 Open battery cover and install a 9 volt battery in the battery compartment Turn on power Hold the instrument comfortably in hand or fix on tripod and point the microphone at the suspected noise source the sound pressure level will be displayed When MAX MIN maximum minimum hold mode is chosen The instrument captures and holds the maximum or minimum noise level for a long period using any of the time weightings and ranges Turn OFF the instrument and remove and remove battery when not in use PYLE www pyleaudio com 1600 63RD STREET BROOKLYN NY 11204 718 535 1800 800 444 5671 IMPORTANT

Pyle Level Meter

Contents

Download Pdf Manuals

Related Search

Related Contents