Chief SLB005 projector accessory
Contents
1. WARNING OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT over tighten screws when installing interface bracket NOTE Step 1 is only required when installing an SLB SSB interface bracket If an SLM SSM bracket is being installed proceed to step 2 Screw thumb screws onto 10 24 x 5 8 Phillips pan head screws DO NOT fully tighten thumb screws at this time Turn projector upside down Place interface bracket onto bottom of projector and align bracket with four threaded inserts in projector ao NS Using M5 x 10mm Phillips pan head screws and flat washers secure interface bracket to projector and tighten all fasteners at this time NOTE There are projector model design variations If there is interference when installing the bracket due to the design of certain projectors use the nylon spacers and the longer M5 x 20mm screws instead of the M5 x 10mm screws and M5 flat washers Security screws can be substituted when mounting interface bracket to projector by using the parts and installation As instructions in the All Points Security Kit Chief is a registered trademark of Milestone AV Technologies All rights reserved Yes wv Py Up ea Milestone AV Technologies and its affiliated corporations and subsidiaries collectively Milestone intend to make this manual accurate and complete However Milestone makes no claim that the information contained herein cove2. INSTALLATION INSTRUCTIONS SSB 005 SSM 005 SLB 005 and SLM 005 Interface Brackets SSB 005 SSM 005 SLB 005 and SLM 005 Interface Brackets are designed for use with Chief Series Projector Mounts See the specific installation instructions provided with the mount for additional installation information Unpack carton and verify kit contents If any listed parts are missing immediately contact a Chief Customer Service representative WARNING IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT substitute hardware Use only hardware supplied by manufacturer 1 Interface Bracket 4 Screw Phillips Pan Head Machine M5 x10mm 1 4 1 All Points Security Kit 4 Washer Flat M5 6 10 24 Thumb Nuts 4 4 4 Screw Phillips Pan Head Machine M5 x20mm Spacer Nylon 375 tall Towards front of Towards front of projector projector SLB 005 SLM 005 Note SSB style interface bracket connections are encircled Note SSM style interface bracket connections are encircled Only used when installing SLB SSB interface brackets NOTE Specific to SSB style and SSM style interface bracket installation all appropriate screws come pre installed as reflected in the encircled locations above DO NOT attempt to substitute and USE ONLY this pre installed hardware for SSB style and SSM style interface bracket installation Installation Instructions
3. rs all details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind Milestone makes no representation of warranty expressed or implied regarding the information contained herein Milestone assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document N Chief Manufacturing a products division of Milestone AV Technologies 8850 000005 RevB iC ae l f 8401 Eagle Creek Parkway Savage MN 55378 2009 Milestone AV Technologies e P 800 582 6480 952 894 6280 F 877 894 6918 952 894 6918 a Duchossois Group a Our Mounts Your Vision
Download Pdf Manuals
Related Search