CRU Data Express DE200
Contents
1. selection requires that the unit ID switch located on the inside of the receiving frame be set to 0 onboard ID selection is set with a switch located on the inside of the receiving frame see figure 3 Enable Termination Power Connector J4 This jumper is installed at the factory and enables termination power to from the SCSI bus NOTE Do not remove this jumper nio Dc Power Commer 14 Jumper sep R Sa sf Figure 2 Receiving Frame Motherboard rear view gt www CRU DataPort com Rugged Reliable Mobile Secure Selecting the Unit ID Number Use the alignment tool provided to select the ID number of the disk drive Unit 1D Number Display Lock D Select otang Swich 894 DC Q ismo mite Sone Drive Carer Guide Receiving Frame Drive Carrier removed Figure 3 Unit ID Select Switch Location NOTE The lock on the Data Express receiving frame functions as a lock and a DC power switch for the carrier unit The lock MUST be engaged turned counterclockwise in order to supply power to the carrier and installed drive unit Limited Product Warranty CRU DataPort CRU warrants the Data Express DE200 to be free of significant defects in material and workmanship for a period of five years from the original date of purchase CRU s warranty is nontransferable and is limited to the original purchaser Limitation of Liability The warranties set forth i2. Rugged Reliable Mobile Secure DE200 Ultra320 80 Pin Install Guide Removable SCSI Wide Ultra320 Drive Enclosure Notes For SCSI Ultra320 operation the DE200 Ultra320 requires Ultra320 drives Ultra320 HBA and Ultra320 compliant cabling internal and external E200 Ultra320 can support Ultra320 implementations with a maximum of fifteen 15 Ultra320 drives Ultra320 repeater may be required DE200 Ultra320 receiving frames are indicated by their BLUE LED while the DE200 Ultra320 carriers are indicated by the Ultra320 logo Package Contents 1 Alignment tool 2 6 32x 1 4 Flathead screws carrier cover 4 6 32x 1 4 Flathead screws drive mounting 4 6 32x 1 4 Panhead screws frame mounting 4 2mm Jumper Figure 1 Drive Installation Assembly Installation 1 Locate the ID select jumper positions on the drive and remove any jumper plugs installed the drive carrier board will plug into this section of the drive 00 260 9800 2 Carefully insert the drive into the carrier Slide the drive towards the drive carrier board so that the 1 0 DC power and ID select connec tors on the drive mate with their respective connectors on the drive carrier board 3 Fasten the drive into place with four 4 46 32 Phillips Flat Hd screws provided Receiving Frame Motherboard Remote Unit ID Selection Pins 1 8 are provided for remote unit ID selection for the computer system or expansion chassis Remote ID
3. n this agreement replace all other warran ties CRU expressly disclaims all other warranties including but not limited to the implied warranties of merchantability and fitness for a particular purpose and non infringement of third party rights with respect to the documentation and hardware No CRU dealer agent or employee is authorized to make any modification extension or addition to this warranty In no event will CRU or its suppliers be liable for any costs of procurement of substitute products or services lost profits loss of information or data computer malfunction or any other special indirect consequential or incidental damages arising in any way out of the sale of use of or inability to use any CRU product or service even if CRU has been advised of the possibility of such damages In no case shall CRUS liability exceed the actual money paid for the products at is sue CRU reserves the right to make modifications and additions to this product without notice or taking on additional liability Certification EMI Standard EMC Standard FCC Part 15 Class B CE EN55022 EN55024 FCC Certification This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause unde
4. sired operation Register your product at www CRU DataPort com A7 200 0006 Rev 2 0 100 260 9800 gt www CRU DataPort com
Download Pdf Manuals
Related Search