Dahle High Speed Letter Folder
Contents
1. into dahleusa com rw dahleusa com DAHLE NORTH AMERICA INC DAHLE USA 375 Jaffrey Road Peterborough NH 03458 DAHLE HIGH SPEED PAPER FOLDER MODEL 10560 for tags Pralling Operating Instructions Caution a 1 DO NOT OVERLOAD PAPER FOLDER HAND FED SLOT 3 SHEETS MAX 20 BOND DO NOT PLACE MORE THAN 50 SHEETS OF 20 BOND PAPER IN THE FEED TRAY 2 YOU CAN FOLD PAPER WITH STAPLES AS LONG AS THE STAPLES ARE NOT LOCATED IN THE FOLD POSITION DO NOT ATTEMPT TO FOLD PAPER THAT CONTAINS PAPER CLIPS OR OTHER HARD MATERIALS AS DAMAGE TO THE FOLDING SYSTEM MAY RESULT 3 KEEP LOOSE CLOTHING FINGERS HAIR JEWELRY AND OTHER FOREIGN OBJECTS AWAY FROM PAPER FOLDING ENTRY 4 NEVER OPERATE FOLDER WITHOUT PAPER IN THE FEED TRAY THIS WILL RESULT IN DAMAGE TO THE FEED PADS AND CAUSE THE FOLDER TO FOLD INCORRECTLY NEVER OPERATE FOLDER WITH THE DEJAMMING HANDLE INSERTED IN THE DEJAMMING SLOT SERIOUS INJURY MAY RESULT ALWAYS REMOVE HANDLE BEFORE TURNING FOLDER ON 6 ALWAYS TURN OFF AND UNPLUG THE MACHINE BEFORE MOVING SERVICING CLEANING OR ANY CONTACT OTHER THAN NORMAL OPERATION SERIOUS INJURY MAY RESULT DO NOT INSERT OR SPRAY ANY OILS OR LUBRICANTS INTO OR AROUND THE MACHINE SOME AGENTS MAY COMBUST CAUSING SERIOUS INJURY STANDARD 7 00 NOT OPERATE THE UNIT WITH A DAMAGED POWER CORD SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACC2. position to start foldng PAPER FOLDING CHART TYPE OF PAPER SIZE FOLD usa axit aaa vurxit sie 12 x10 4st A J 4 aX lan s K Y ast 8 N 1 leno Ss K Y ast 6 R D bolo i sst R 3 ee This chartis also found on the unit Fig B REMARKS 4 ISTIS THE LONGER FOLDING GUIDE 2 2ND IS THE SHORT FOLDING GUIDE If the paper jams If paper becomes jammed always unplug folder first You can attempt to remove the paper by hand If this is unsuccessful the de jamming handle is located on the bottom of the folder remove ind insert the handle in the circular opening on the si direction while pulling on the paper ALWAYS REPLACE THE DE JAMMING HANDLE ON THE BOTTOM OF THE UNIT DO NOT LEAVE DE JAMMING POSITION ON THE SIDE OF THE UNIT THIS UNIT OPERATES AT A HIGH RATE OF SPEED THE HANDLE WILL TURN AT THE SAME SPEED AS THE ROLLERS AND COULD CAUSE INJURY IF CONTACT IS MADE BETWEEN THE HANDLE AND A HAND OR OTHER BODY PART To avoid electrical s product this action k do not open the housing on any id the warranty Common sense warning Moisture will affect the performance of this unit Paper can become difficult to fold in humid conditions or where heavy moisture may be present If you have questions or need more information on any of our products please contact our consumer information line CUSTOMER SERVICE LINE 1 800 243 8145 e mail
3. AC outlet The ON OFF MANUAL switch is located next to the slot for the de jamming handle If it isi ON position the unit will run continuously until switched off even if there is no paper in the folding tray or in the uni Replacing the feed pads 2 replacement pads are included with your folder should you need to replace worn pads Pull out the lower paper guide from the unit and use a flat head screw driver or similar type tool to pry the wom pads out Place a fresh pad in the receptacle and press firmly Then insert it back to the unit pressing the spring on the lower part f you require additional pads please contact Dahle Customer Service Features Folds up to 4 000 sheets of 20 Ib bond paper per hour in four popular folding styles Folds up to 3 sheets of paper manual feed at a time Paper tray holds up to 50 Sheets of 20 Ib bond plain paper Paper tray holds up to 40 Sheets of bright white paper Paper tray holds up to 20 Sheets of heavy bond paper
4. ESSIBLE Safety Instructions Please read and retain these instructions 4 Read al 2 Follow all warnings and instructions marked on the product 3 Unplug this product from the wall outlet before cleaning If needed the housing can be cleaned with a cloth dampened with a mild soap and water solution 4 Folder should never be placed near or over a radiator heat register or water 5 Operate folder from the power source indicated on the marking label I you are unsure of the power source consult your dealar or local power company 6 Do not rest anything on the power cord Do not place machine where people may walk on the cord 7 If an extension cord is used make sure that the total ampere ratings of the products plugged into the extension cord do not exceed the extension cord ampere rating and that the total of all products plugged into the wall outlet does not exceed 15 amperes 8 Do not ater the unit or power cord in any way Do not operate the Unit if it or the power cord appears damaged in any way 9 Do not service this product yourself Opening removing covers may expose you to dangerous voltage points or other risks and will void manufacturer s warranty Unplug product from outlet and refer servicing to qualified service personnel 10 Keep out of reach of children and pets 11 This folder should be operated only with an operator in attendance 12 BE SURE THE ON OFF MANUAL SWITCH IS IN THE OFF POSITION BE
5. FORE PLUGGING IN THE FOLDER UPPER PAPER GUIDE Installation FEED RUBBER PADS LOWER PAPER GUIDE RN METAL STAND structions before use Save these instructions for later use 4 Carefully unpack the machine and inspect all contents for damage Place the metal stand on a flat level work surface and place the folder on top of it 2 Insert the folding guides Step 1 The long guide st is inserted in the front of the machine its placement is indicated cn the inner sides of the front of the folder The guide must be inserted so that the C shaped ends fit firmly onto the silver cylinders You will know itis securely seated when it does not move or shift when pressed Step 2 The smaller guide 2nd is inserted in the back of the unit make sure it fs firmly into the silver cylinders and magnets are in contact with the silver cylinders 3 The paper tray consists of 2 parts the lower paper tray should already be installed in your folder ifit is not please refer to Fig for instructions Step 3 The upper paper tray should be carefully snapped into the lower tray with the tabs on the bottom of the tray Please note the upper paper tray will be slightly flexible once it is snapped in place 4 Step 4 To adjust the depth of the metal wire paper catch simply pull the catch out to the desired depth 5 Once the folding guides are inserted properly and the paper tray is installed plug power cord into an
6. Operation NOTE The folder is preset and tested for a standard 8 1 2 x11 letter fold Nake sure that the ON OFF MANUAL switch is in the OFF position before the machine is plugged in 1 Setting the fold position designed to fold t to choose one cf the four common folds Choose one of the three paper szes Loosen the knobs on the paper folding quides and slide them the desired set of letters aligning the top edge of the guide withthe arrows next tothe letters For exemple If you want to fold AA paper inlo a Z shape fold just set the knob on the st folding Quice to N sition and set the knob on 2nd folding guide tothe K position 2 fyou have mutiple pages to fold we recommend you to use AUTO FEED folding Place a stack of paper in the cenier of the paper tray not more than 50 sheets of 20 I bond plin paper 40 sheets of bright white paper 20 sheets of heavy bond Paper and slide the paper guides on paper tray together until the paper is firmly positioned in the center for straight and smooth feeding into the machine Make sure thatthe paperis under the feed wheel Push the ONOFFIMANUAL switch to the ON Postion to begin folding Ifyou have only a few pages to fold or want to fold a mutiple page document you will want to choose MANUAL FEED folding Drop the paper max 3 sheets hand feed entry hold the paper so that it rests squarely on the rollers for the smoothest feed The ON OFF MANUAL switch needs to be in the MANUAL
Download Pdf Manuals
Related Search