Philips SB8600
Contents
1. Turn off Press and hold for one second again L gt The speaker is turned off The speaker is turned off automatically in the following situations Msic playback through Bluetooth or external devices is stopped or paused for 15 minutes e There is no phone call for 15 minutes or e The volume level is O for 15 minutes EN 5 4 Play from Bluetooth enabled devices With this product you can listen to audio from Bluetooth enabled devices Connect a device e Make sure that your Bluetooth device is compatible with this speaker e Before pairing a device with this speaker read its user manual for Bluetooth compatibility e The speaker can memorize a maximum of 4 paired devices e Make sure that Bluetooth function is enabled on your device and your device is set as visible to all other Bluetooth devices e Any obstacle between this speaker and a Bluetooth device can reduce the operational range Keep away from any other electronic device that may cause interference Connect a device through NFC Near Field Communication NFC is a technology that enables short range wireless communication between various NFC compatible devices such as mobile phones and IC tags If your Bluetooth device supports NFC you can connect it with this speaker easily 1 Press and hold for one second on the speaker L gt The Bluetooth indicator flashes white 2 Enable NFC o2. nput 100 240 V 50 60 Hz 800 mA MAX Output 15 V 2A Battery Lithium battery 11 1V 2200mAh Charging Max 1000 mA for USB Operation Power lt 25 W Consumption Dimensions Main 325 x176 x115 mm Unit W x H x D EN 7 Troubleshooting Warning e Never remove the casing of this device To keep the warranty valid never try to repair the system yourself If you encounter problems when using this device check the following points before requesting service If the problem remains unsolved go to the Philips Web page www philips com support When you contact Philips make sure that the device is nearby and the model number and serial number are available General No power ake sure that the AC power plug is connected properly ake sure that there is power at the AC outlet e Recharge the built in battery No sound e Adjust volume on the speaker or the Bluetooth connected device e Make sure that your Bluetooth device is within the effective operational range No response from the speaker e Disconnect and reconnect the AC power plug then turn on the speaker again e Press the reset button with the tip of a pen or toothpick to restore factory settings Cannot charge mobile devices ake sure that AC power is connected properly e Make sure that there is power at the AC outlet About Bluetooth device The audio quality is poor aft
3. Always there to help you Register your product a T upport at www philips com suppor G Question Contact Philips SB8600 User manual PHILIPS Contents 1 Important 2 Safety 2 2 Your Bluetooth speaker 3 Introduction 3 What s in the box 3 Overview of the speaker 4 3 Get started 5 Power supply 5 Turn on 5 4 Play from Bluetooth enabled devices 6 Connect a device 6 Play from Bluetooth device 7 Reconnect the Bluetooth device 7 Disconnect the Bluetooth enabled device 7 Connect another Bluetooth enabled device 7 Speak through the microphone 7 Enable or disable outdoor sound effect 7 5 Other features 8 Charge your mobile devices 8 Listen to an external device 8 Adjust volume 8 Reset the speaker 8 6 Product information 9 Specifications 9 7 Troubleshooting 10 General 10 About Bluetooth device 10 8 Notice 11 EN 1 Important Never remove the casing of this speaker Never lubricate any part of this speaker Never place this speaker on other electrical equipment Keep this speaker away from direct sunlight naked flames or heat Make sure that you always have easy access to the power cord plug or adaptor to disconnect the speaker from the power Make sure that there is enough free space around the speaker for ventilation Use only power supplies listed in the user manual Only use attachments or accessories specified by the manufacturer The battery shall not be
4. er connection with a Bluetooth enabled device e The Bluetooth reception is poor Move the device closer to this product or remove any obstacle between them Cannot connect with the device e The Bluetooth function of the device is not enabled Refer to the user manual of the device for how to enable the function e This product is already connected with another Bluetooth enabled device Disconnect that device and then try again The paired device connects and disconnects constantly e The Bluetooth reception is poor Move the device closer to this product or remove any obstacle between them For some devices Bluetooth connection may be deactivated automatically as a power saving feature This does not indicate any malfunction of this product 8 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user s authority to operate the equipment Disposal of your old product ES Your product is designed and manufactured with high quality materials and components which can be recycled and reused Do not throw away the product with the normal household waste at the end of its life but hand it in at an official collection point or recycling By doing this you help to preserve the environment Always bring your product to a professional to remove the built in battery Envi
5. exposed to excessive heat such as sunshine fire or the like The speaker shall not be exposed to dripping or splashing Do not place any sources of danger on the speaker e g liquid filled objects lighted candles Where the plug of the Direct Plug in Adapter is used as the disconnect device the disconnect device shall remain readily operable Note e The type plate is located on the bottom of the apparatus EN 2 Your Bluetooth speaker Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Introduction With this speaker you can e play audio from Bluetooth enabled devices or other external devices and e charge your mobile devices What s in the box Check and identify the contents of your package Speaker e Power adaptor Short user manual EN Overview of the speaker Ra i 0 Ra A D SG O CHARGING DC IN Disconnect Bluetooth connection Enter Bluetooth pairing mode OUTDOOR e Enable or disable outdoor sound effect Built in microphone e Adjust volume NFC Connect a NFC compatible device through Bluetooth AUDIO IN e Connect an external audio device O OG O Reset e Restore factory default status Turn the speaker on or off Charge mobile devices Bluetooth indicat
6. he Bluetooth device Next time you turn on the speaker the speaker will reconnect the last connected device automatically or e On your Bluetooth device select Philips ShogBox XL on your Bluetooth menu to start connection Disconnect the Bluetooth enabled device e Press and hold for three seconds e Disable Bluetooth on your device or e Move the device beyond the communication range L gt The Bluetooth indicator flashes white Connect another Bluetooth enabled device 1 Press and hold for three seconds to disconnect the currently connected device L gt The speaker enters Bluetooth pairing mode 2 Connect another Bluetooth device Speak through the microphone If Bluetooth connection is established when there is an incoming call on your phone you can speak through the built in microphone on SB8600 Note e Music play pauses when there is an incoming call Play g Enable or disable outdoor sound effect Press OUTDOOR repeatedly to enable or disable the outdoor sound effect L gt fthe sound effect is enabled the OUTDOOR button lights up whte EN 7 5 Other features Charge your mobile devices With this speaker you can charge your mobile devices through the CHARGING socket Note e The USB socket is used for charging only 1 Connect to AC power supply 2 Connect to your mobile device with a USB cable not supplied L gt Once the device
7. is recognized the charging starts Listen to an external device With this speaker you can also listen to an external audio device such as an MP3 player Note e Make sure that Bluetooth connection is disconnected 1 Connect an audio input cable not supplied with a 3 5 mm connector on both ends to e the AUDIO IN socket on this speaker and e the headphone socket on the external device 2 Play audio on the external device refer to its user manual Adjust volume During play press or to increase or decrease volume Note e When the volume reaches the maximum or minimum the button flashes white for two seconds Reset the speaker If the system works abnormally reset the speaker to factory default settings e Press the reset button with the tip of a pen or toothpick All settings are reset to factory default 6 Prod u ct Weight Main Unit 2 kg information Note e Product information is subject to change without prior notice Specifications Amplifier Rated Output Power 2 X 10W RMS Signal to Noise Ratio gt 65 dBA Audio in Input 0 6V RMS 22kOhm Bluetooth Bluetooth Version V4 0 Frequency Band 2 402 2 480 GHz ISM Band Range 10 m Free Space General information Power Supply AC Power Brand name PHILIPS power adapter odel OH 1028A1502000U IR
8. n your Bluetooth device y refer to the user manual of the device 3 Touch the NFC tag on the speaker with the NFC area of your Bluetooth device until you hear a beep 6 EN 4 On your Bluetooth device accept the pairing request with SB8600 If necessary input 0000 as the pairing password 5 Follow the on screen instructions to complete the pairing and connection L gt After successful pairing and connection the speaker beeps twice and the Bluetooth indicator turns solid white Connect a device manually Note e The operational range between this speaker and a Bluetooth device is approximately 10 meters 30 feet On the speaker press and hold for one second L gt The Bluetooth indicator flashes white 2 On your Bluetooth device enable Bluetooth and search for Bluetooth devices refer to the user manual of the device 3 When Philips ShoqBox XL is displayed on your device select it to start pairing and connection If necessary enter default password 0000 L After successful pairing and connection the speaker beeps twice and the Bluetooth indicator turns solid white Bluetooth indicator o Flashing white Description Connecting or waiting for pairing Solid white Connected Play from Bluetooth device After successful Bluetooth connection play audio on the Bluetooth device Audio streams from your Bluetooth device to the speaker Reconnect t
9. or Connect AC power 3 Get started Always follow the instructions in this chapter in sequence Power supply Either AC power or battery can be used as power supply of this product Option 1 AC power Caution e Risk of product damage Make sure that the power voltage corresponds to the voltage printed on the back or underside of the speaker e Risk of electric shock When you unplug the AC adapter always pull the plug from the socket Never pull the cord Connect the power adaptor to e the DC IN socket at the back of the speaker e the wall outlet Option 2 Battery power The speaker can also be powered by the built in rechargeable battery Note e Rechargeable battery has a limited number of charge cycles Battery life and number of charge cycles vary by use and settings e It takes you approximately five hours to fully charge the battery To charge the built in battery Connect to AC power supply When powered by AC mains System Battery status Power LED status status On Under charging Flashing white Fully charged Solid white Off Under charging Solid red Fully charged Off When powered by the built in battery System Status Power LED status On Solid white Full battery Flashing red Low battery Off Off Turn on Press and hold for one second L gt The button lights up tL The Bluetooth indicator flashes white
10. ronmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the ocal regulations regarding the disposal of packaging materials exhausted batteries and old equipment Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by WOOX Innovations is under license mNntc The N Mark is a trademark or registered trademark of NFC Forum Inc in the United States and in other countries 2014 CSR plc and its group companies The aptX mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions EN 11 PHILIPS a T Specifications are subject to change without notice 2014 WOOX Innovations Limited All rights reserved Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used by WOOX Innovations Limited under license from Koninklijke Philips N V SB8600_77_UM_V1 0
Download Pdf Manuals
Related Search