DELL OptiPlex 3030
Contents
1. K NOTE If the password jumper is disabled the existing System Password and Setup Password is deleted and you need not provide the system password to log on to the computer To enter a system setup press lt F2 gt immediately after a power on or re boot 1 In the System BIOS or System Setup screen select System Security and press Enter The System Security screen appears 2 In the System Security screen verify that Password Status is Unlocked 3 Select System Password enter your system password and press lt Enter gt or lt Tab gt Use the following guidelines to assign the system password A password can have up to 32 characters The password can contain the numbers O through 9 42 N e Only lower case letters are valid upper case letters are not allowed Only the following special characters are allowed space 9 0 0 0 0 0 0 C Re enter the system password when prompted Type the system password that you entered earlier and click OK Select Setup Password type your system password and press lt Enter gt or lt Tab gt A message prompts you to re type the setup password Type the setup password that you entered earlier and click OK Press lt Esc gt and a message prompts you to save the changes Press lt Y gt to save the changes The computer reboots Deleting or Changing an Existing System and or Setup Password Ensure that the Password Status is Unlocked in the System Setu2. Allows you to speed up the boot process by bypassing some compatibility steps The options are Minimal e Thorough This option is selected by default e Auto Description This option specifies whether a Virtual Machine Monitor VMM can utilize the additional hardware capabilities provided by Intel Virtualization technology e Enable Intel Virtualization Technology This option is enabled by default Description Allows enabling disabling the internal wireless devices The options are is WLAN WIGIG enabled by default 39 Table 11 Maintenance Option Service Tag Asset Tag SERR Messages Table 12 Cloud Desktop Option Server Lookup Method Server Name Server IP Address Server Port Client Address Method Client IP Address 40 Description Displays the service tag of your computer Allows you to create a system asset tag if an asset tag is not already set This option is not set by default Controls the SERR message mechanism This option is enabled by default Some graphics cards require that the SERR message mechanism be disabled e Enable SERR Messages Description Specifies how the ImageServer looks up the server address e Static IP e DNS enabled by default Es NOTE This field is only relevant when the Integrated NIC control in the System Configuration group is set to Enabled with ImageServer Displays the name of the server Displays the primary static IP address of the ImageS
3. a system board b convertor board c WLAN card 28 system fan heatsink speakers system board shield VESA bracket memory hard drive optical drive back cover Stand stand cover BRT ATTIO o a 5 Follow the procedures in After Working Inside Your Computer Removing the Camera 1 Follow the procedures in Before Working Inside Your Computer 2 Remove a b C d e f g h i j k l m n O Remove the screws that secure the camera to the computer and release the camera from its slot to access the camera cable stand cover stand back cover optical drive hard drive memory VESA bracket system board shield speakers heatsink system fan WLAN card convertor board system board display bracket 29 4 Disconnect the camera cable from the camera and remove the camera from the computer Installing the Camera 1 Connect the camera cable to the camera 2 Align the camera into its slot and tighten the screws to secure it to the computer 3 Install display bracket system board convertor board WLAN card system fan heatsink speakers system board shield VESA bracket memory hard drive optical drive back cover stand stand cover OSB 37 AFT TQ rO ADT 4 Follow the procedures in After Working Inside Your Computer Removing the Microphone 1 Follow the procedures in Before Working Inside Your Computer 2 Remove a stand cover b stand c back cover 3
4. Operating Storage Maximum shock Operating Storage Altitude Operating Storage Airborne contaminant level 48 Specification Green a good 10 Mbps connection exists between the network and the computer Green a good 100 Mbps connection exists between the network and the computer Orange a good 1000 Mbps connection exists between the network and the computer Off no light the computer is not detecting a physical connection to the network Yellow light A blinking yellow light indicates that network activity is present Green light The power supply is turned on and is functional The power cable must be connected to the power connector at the back of the computer and the electrical outlet Specification 5 C to 35 C 41 F to 95 F 40 C to 65 C 40 F to 149 F 10 to 90 non condensing 10 to 95 non condensing 0 66 GRMS 1 30 GRMS 110 G 160 G 15 20 m to 3048 m 50 ft to 10 000 ft 15 20 m to 10 668 m 50 ft to 35 000 ft G2 or lower as defined by ANSI ISA S71 04 1985 Contacting Dell Contacting Dell K NOTE If you do not have an active Internet connection you can find contact information on your purchase invoice packing slip bill or Dell product catalog Dell provides several online and telephone based support and service options Availability varies by country and product and some services may not be available in your area To contact Dell for
5. Specification Tilt 5 degrees to 30 degrees Table 26 Physical Dimensions Feature Without Stand With Stand Width 489 92 mm 19 29 inches 489 92 mm 19 29 inches Height 328 84 mm 12 95 inches 385 58 mm 15 18 inches Depth non touch 67 62 mm 2 66 inches 204 58 mm 8 05 inches touch 66 72 mm 2 63 inches 204 97 mm 8 07 inches Weight non touch 4 18 kg to 4 37 kg 9 21 lb to 9 63 lb 5 68 kg to 5 87 kg 12 52 lb to 12 94 lb touch 4 87 kg to 5 06 kg 10 74 lb to 11 15 6 37 kg to 6 56 kg 14 04 lb to lb 14 46 lb Stand Width x Depth 200 00 mm 7 87 inches x 200 00 mm 7 87 inches NOTE The weight of your computer may vary depending on the configuration ordered and the manufacturing variability Table 27 Controls and Lights Feature Specification Power button light White light Solid white light indicates power on state blinking white light indicates sleep state of the computer Hard Drive activity light White light Blinking white light indicates that the computer is reading data from or writing data to the hard drive Camera LED White light solid while light indicates that the camera is on 47 Feature Back panel Link integrity light on integrated network adapter Network activity light on integrated network adapter Power supply diagnostic light Table 28 Environmental Feature Temperature range Operating Storage Relative humidity maximum Operating Storage Maximum vibration
6. VESA bracket b system board shield C back cover d stand e stand cover 4 Follow the procedures in After Working Inside Your Computer Removing the Power Switch Board 1 Follow the procedures in Before Working Inside Your Computer 2 Remove a stand cover b stand C back cover 3 Peelthe tape that secures the power switch board to the computer Lift the power switch board to access the cable 25 Installing the Power Switch Board 1 Insert the power switch board into its slot on the computer and fix the tape to secure it Connect the power switch cable to the power switch board 2 Install a back cover b stand c stand cover 3 Follow the procedures in After Working Inside Your Computer Removing the System Board 1 Follow the procedures in Before Working Inside Your Computer 2 Remove a stand cover b stand 24 back cover memory VESA bracket system board shield heatsink WLAN card 3 Disconnect the following from the system board mud ew n camera cable LVDS cable system fan cable optical drive cable hard drive cable hard drive optical drive power cable convertor board cable power switch cable touch cable if available speaker cable So Soo casa 4 Perform the following steps as shown in the illustration a Remove the screws that secure the system board to the computer 1 b Slide the system board to release it from the computer 2 25 5 Remove th
7. and connect the speaker cable to the system board 3 Align the speaker cover on the computer and tighten the screws to secure it 4 Install a system board shield 21 b back cover c stand d stand cover 5 Follow the procedures in After Working Inside Your Computer Removing the VESA Bracket 1 Follow the procedures in Before Working Inside Your Computer Remove a stand cover b stand c back cover 3 Perform the following steps as shown in the illustration a Remove the screws that secure the VESA bracket to the computer 1 b Remove the VESA it from the computer 2 Installing the VESA Bracket 1 Align the VESA bracket on the computer Tighten the screws to secure it to the computer Install a back cover b stand c stand cover 3 Follow the procedures in After Working Inside Your Computer Removing the System Fan 1 Follow the procedures in Before Working Inside Your Computer 2 Remove 22 stand cover stand back cover System board shield VESA bracket 3 Perform the following steps as shown in the illustration once a Disconnect the system fan cable from the system board 1 b Remove the screws that secure the system fan 2 c Remove system fan from the computer 3 Installing the System Fan 1 Align the system fan with the heatsink on the computer and tighten the screws to secure it to the computer 2 Connect the system fan cable to the system board 3 Install a
8. bracket to release it from its lock 1 b Lift the hard drive from one edge 2 13 4 Slide and remove it to access the hard drive cable 5 Disconnect the hard drive cable from the hard drive and remove it from the computer 6 Pry the hard drive bracket apart to release the hard drive Remove the hard drive from the hard drive bracket 14 as Installing the Hard Drive 4 Insert the hard drive into the hard drive bracket Connect the hard drive cable to the hard drive and align the hard drive to its slot on the computer Install a back cover b stand c stand cover Follow the procedures in After Working Inside Your Computer Removing the Convertor Board 1 2 Follow the procedures in Before Working Inside Your Computer Remove a stand cover b stand c back cover Disconnect the cables from the convertor board Remove the screws and lift the convertor board from the computer 15 Installing the Convertor Board 1 2 Tighten the screws to secure the convertor board to the computer Connect the cables to the convertor board Install a back cover b stand c stand cover Follow the procedures in After Working Inside Your Computer Removing the Memory 1 2 16 Follow the procedures in Before Working Inside Your Computer Remove a stand cover b stand c back cover Perform the following steps as shown in the illustration a Slide to release
9. is set to Static IP Displays the gateway IP address for the client The default setting is 255 255 255 255 K NOTE This field is only relevant when the Integrated NIC control in the System Configuration group is set to Enabled with ImageServer and when Client DHCP is set to Static IP Displays the DNS IP address of the cleint The default setting is 255 255 255 255 Displays the Domain Name of the client Specifies for Advanced debugging e Verbose Mode Disabled by default Description Displays the system event log and allows you to clear the log e Clear Log It is recommended to update your BIOS system setup on replacing the system board or if an update is available For laptops ensure that your computer battery is fully charged and connected to a power outlet 1 Re startthe computer 2 Goto dell com support 3 Enter the Service Tag or Express Service Code and click Submit K NOTE To locate the Service Tag click Where is my Service Tag NOTE If you cannot find your Service Tag click Detect My Product Proceed with the instructions on screen 4 Ifyou are unable to locate or find the Service Tag click the Product Category of your computer 5 Choose the Product Type from the list 41 6 Select your computer model and the Product Support page of your computer appears 7 Click Get drivers and click View All Drivers The Drivers and Downloads page opens 8 Onthe Drivers and Downloads screen
10. outlets Turn on your computer nap If required verify that the computer works correctly by running the Dell Diagnostics System Overview Figure 1 Inside View 1 1 memory shield 2 system board shield 3 bottom cover 4 power switch board 5 hard drive 6 VESA Bracket 7 optical drive 8 convertor board Figure 2 Inside View 2 WLAN card memory module power supply unit system board speaker display bracket system fan heatsink o ON aun RFWDNP camera o microphone System Board Layout The following image displays the system board layout of the computer o o aa F WN P e e RP RP PP BP BP pP NQOORWN EO 10 SD Memory card reader memory module speaker connector touch connector control board connector HDD connector ODD connector SATA power connector convertor board connector power connector 2 power connector 1 system fan connector processor connector coin cell Battery WLAN connector LVDS connector camera 5 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer Removing the Stand 1 Follow the procedures in Before Working Inside Your Computer 2 Remove the stand cover 3 Remove the screws that secure the stand to the computer and remove the stand from the computer Installing the Stand Align the stand on the computer and tighten the screws to secure the sta
11. sales technical support or customer service issues Visit dell com support Select your support category Verify your country or region in the Choose a Country Region drop down menu at the top of page Dou po Select the appropriate service or support link based on your need 49
12. the memory cover from the computer 1 b Remove the memory cover from the computer 2 4 Pry the retention clips away from the memory module until it pops up Lift and remove the memory module from its connector o x ne 4 Installing the Memory PWN P Align the notch on the memory card with the tab in the system board connector Press down on the memory module until the release tabs spring back to secure them in place Place the memory cover back into its place Install a back cover b stand c stand cover Follow the procedures in After Working Inside Your Computer Removing the System Board Shield 1 2 Follow the procedures in Before Working Inside Your Computer Remove a stand cover b stand c back cover Perform the following steps as shown in the illustration a Remove the screws that secure the system board shield to the computer 1 b Lift the system board shield from the computer 2 c Remove the system board shield from the computer 3 17 Installing the System Board Shield 1 Align the system board shield on the system board Tighten the screws to secure it to the computer 2 Install a back cover b stand c stand cover 3 Follow the procedures in After Working Inside Your Computer Removing the Heatsink 1 Follow the procedures in Before Working Inside Your Computer Remove a stand cover b stand c back cover d system board shield 3
13. 4 Right Side USB Ports Port1 Top Port 2 Bottom Option Audio OSD Button Management Miscellaneous Devices Table 4 Security Option Admin Password System Password Internal HDD O Password Description Default Setting All devices are enabled Allows you enable or disable the audio feature e Enable Audio Enable Microphone Enable Internal Speaker Default Setting All devices are enabled Allows you to disable the OSD On Screen Display buttons e Disable OSD Buttons Default Setting OSD buttons are not disabled Allows you to enable or disable various on board devices Enable Camera This option is selected by default e Enable Media Card This option is selected by default Disable Media Card Description This field lets you set change or delete the administrator admin password sometimes called the setup password The admin password enables several security features The drive does not have a password set by default e Enter the old password Enter the new password e Confirm the new password This field lets you set change or delete the system password The system password enables several security features The drive does not have a password set by default e Enter the old password e Enter the new password e Confirm the new password Allows you to set change or delete the password on the computer s internal hard disk drive HDD Successful
14. OptiPlex 3030 All in One Owner s Manual Regulatory Model W10B Regulatory Type W10B001 Notes Cautions and Warnings Es NOTE A NOTE indicates important information that helps you make better use of your computer A CAUTION A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem A WARNING A WARNING indicates a potential for property damage personal injury or death Copyright O 2014 Dell Inc All rights reserved This product is protected by U S and international copyright and intellectual property laws Dell and the Dell logo are trademarks of Dell Inc in the United States and or other jurisdictions All other marks and names mentioned herein may be trademarks of their respective companies 2014 06 Rev ADO Contents 1 Working on Your Computer caian lit elas 5 Before Working Inside Your GOMPpUte ist irt reet trate nee tad cai 5 Recommended Tools theo he tec e eee a eb ep ede ea Pc t t it 6 T rning Off Your Computers eiae e e ec to tute ER eb dad 6 After Working Inside Your Computer ener tener eter trn nennt nnne nitens 7 2 System OVETVICW ini ie vane mer re sivi rive aad 8 System Board Layout cce etn on meret e entiende de tede 9 3 Removing and Installing Components eee 11 Removing the Stand s tcr tette in e ete e Ene be eM nei ont Gia M ee d et cela 11 nstalling thes tall es oreet eddie e dete ute oa addons S e AA tia
15. Optical Drive Diagnostics K NOTE Choosing Diagnostics will display the ePSA diagnostics screen The boot sequence screen also displays the option to access the System Setup screen Navigation Keys The following table displays the system setup navigation keys NOTE For most of the system setup options changes that you make are recorded but do not take effect until you re start the system 32 Table 1 Navigation Keys Keys Navigation Up arrow Moves to the previous field Down arrow Moves to the next field lt Enter gt Allows you to select a value in the selected field if applicable or follow the link in the field Spacebar Expands or collapses a drop down list if applicable lt Tab gt Moves to the next focus area K NOTE For the standard graphics browser only lt Esc gt Moves to the previous page till you view the main screen Pressing lt Esc gt in the main screen displays a message that prompts you to save any unsaved changes and restarts the system lt F1 gt Displays the System Setup help file System Setup Options K NOTE Depending on your computer and its installed devices the items listed in this section may or may not appear Table 2 General Option Description System Board This section lists the primary hardware features of your computer e System Information e Memory Information e PCI Information Processor Information Device Information Boot Sequence Allows you to change t
16. Perform the following steps as shown in the illustration 30 a Remove the screw that secures the microphone b Disconnect the microphone cable from the microphone c Remove the microphone from the computer Installing the Microphone 1 Connect the microphone cable to the microphone 2 Align the microphone into its slot and tighten the screws to secure it to the computer 3 Install a back cover b stand c stand cover 4 Follow the procedures in After Working Inside Your Computer 31 4 System Setup System Setup enables you to manage your computer hardware and specify BIOS level options From the System Setup you can e Change the NVRAM settings after you add or remove hardware View the system hardware configuration Enable or disable integrated devices e Set performance and power management thresholds e Manage your computer security Boot Sequence Boot Sequence allows you to bypass the System Setup defined boot device order and boot directly to a specific device for example optical drive or hard drive During the Power on Self Test POST when the Dell logo appears you can e Access System Setup by pressing F2 key Bring up the one time boot menu by pressing F12 key The one time boot menu displays the devices that you can boot from including the diagnostic option The boot menu options are e Removable Drive if available e STXXXX Drive K NOTE XXX denotes the SATA drive number
17. Perform the following steps as shown in the illustration a Remove the screw that secure the heatsink to the computer 1 b Remove the screws that secure around CPU to the computer 2 c Lift and remove the heatsink from the computer 3 18 Installing the Heatsink Align the heatsink on the system board Tighten the screws to secure it to the computer Install a system board shield b back cover c stand d stand cover Follow the procedures in After Working Inside Your Computer Removing the Speakers 1 2 Follow the procedures in Before Working Inside Your Computer Remove a stand cover b stand c back cover d system board shield Perform the following steps as shown in the illustration a Remove the screws that secure the speaker cover to the computer 1 b Release the speaker cover from the computer 2 19 4 Remove the speaker cover from the computer 5 Perform the following steps as shown in the illustration a Disconnect the speaker cable from the system board 1 b Release the cable from the tabs on the computer 2 20 6 Perform the following steps as shown in the illustration a Remove the screws that secure the speakers to the computer 1 b Remove the speakers from the computer 2 Installing the Speakers 1 Align the speakers on the computer Tighten the screws to secure them to the computer Align the speaker cables through their tabs on the computer
18. ate Allows you to enable or disable the execute disable mode of the processor e Enable CPU XD Support This option is enabled by default Allows you to enable or disable the option to enter setup when an admin password is set e Enable Admin Setup Lockout This option is disabled by default Table 5 Secure Boot Option Secure Boot Enable Expert Key Management Table 6 Performance Option Multi Core Support Intel SpeedStep C States Control Description Allows you to enable or disable the Secure Boot Feature The options are Disabled Default Enabled Allows you to manipulate the security key databases only if the system is in Custom Mode The Enable Custom Mode option is disabled by default The options are e PK e KEK e db e dbx If you enable the Custom Mode the relevant options for PK KEK db and dbx appear The options are e Save to File Saves the key to a user selected file e Replace from File Replaces the current key with a key from a user selected file Append from File Adds a key to the current database from a user selected file e Delete Deletes the selected key e Reset All Keys Resets to default setting e Delete All Keys Deletes all the keys K NOTE If you disable the Custom Mode all the changes made will be erased and the keys will restore to default settings Description Specifies whether the process will have one or all cores enabled The performance of
19. bled in S5 only Enabled in S4 and S5 Enabled Controls the speed of the system fan This option is disabled by default e Fan Control Override This option is disabled by default This option allows you to enable USB devices to wake the computer from standby e Enable USB Wake Support This option is enabled by default Allows you to power up the computer from the off state when triggered by a special LAN WLAN signal e Disabled Option Block Sleep Intel Smart Connect Technology Table 8 POST Behavior Option Numlock LED Keyboard Errors Fastboot Table 9 Virtualization Support Option Virtualization Table 10 Wireless Option Wireless Device Enable Description e LAN Only e WLAN only LAN with PXE Boot This option is Disabled by default Allows you to block entering to sleep S3 state in OS Environment Block Sleep S3 State This option is disabled by default The option is disabled by default If option enables will periodically sense nearby wireless connection while the system is asleep It will synchronize emails or social media application that were open when system entered the sleep state e Smart Connection Description Allows you to enable NumLock on when the computer boots This option is enabled by default Enable Numlock LED Allows you to enable keyboard related error report when the computer boots This option is enabled by default e Enable Keyboard Error Detection
20. change to this password take effect immediately The drive does not have a password set by default e Enter the old password e Enter the new password 35 Option Strong Password Password Configuration Password Bypass Password Change TPM Security Computrace CPU XD Support Admin Setup Lockout 36 Description e Confirm the new password Enable strong password This option is disabled by default This field controls the minimum and maximum number of characters allowed for the admin and system passwords e Admin Password Min e Admin Password Max e System Password Min e System Password Max By default the minimum characters are set to 4 and maximum to 32 Allows you to bypass the System Password and the internal HDD password prompts during a system restart Disabled This option is selected by default e Reboot Bypass Allows you to determine whether changes to the system and hard disk passwords are permitted when an administrator password is set Allow Non Admin Password Changes This option is enabled by default Allows you to control whether the Trusted Platform Module TPM in the system is enabled and visible to the operating system TPM Security This option is disabled by default Allows you to activate deactivate or disable the BIOS module interface of the optional Computrace Service from Absolute Software e Deactivate This option is disabled by default Disable e Activ
21. e system board from the computer XN Installing the System Board 1 Align the system board on the computer 2 Tighten the screws to secure the system board to the computer 3 Connect the following cables to the system board a camera cable b LVDS cable c system fan cable d optical drive cable e hard drive cable 26 f hard drive optical drive power cable g convertor board cable h touch cable if available i power switch cable j speaker cable 4 Install WLAN card heatsink system board shield VESA bracket memory back cover stand stand cover 20750005 5 Follow the procedures in After Working Inside Your Computer Removing the Display Bracket 1 Follow the procedures in Before Working Inside Your Computer 2 Remove stand cover stand back cover optical drive hard drive memory VESA bracket system board shield speakers heatsink system fan WLAN card convertor board system board sog mee E muB ea pd 3 Release the LVDS camera convertor board cables from their tabs on the display bracket 27 4 Remove the screws that secure the display bracket to the computer Lift and remove the display bracket from the computer Installing the Display Bracket Align the display bracket on the computer Tighten the screws to secure the display bracket to the computer Align the LVDS camera convertor board cables through their tabs on the display bracket PUNE Install
22. erver with which the client software communicates The default IP address is 255 255 255 255 K NOTE This field is only relevant when the Integrated NIC control in the System Configuration group is set to Enabled with ImageServer and when Lookup Method is set to Static IP Displays the primary IP port of the ImageServer which is used by the client to communicate The default IP port is 06910 K NOTE This field is only relevant when the Integrated NIC control in the System Configuration group is set to Enabled with ImageServer Specifies how the client obtains the IP address e Static IP e DHCP enabled by default K NOTE This field is only relevant when the Integrated NIC control in the System Configuration group is set to Enabled with ImageServer Displays the static IP address of the client The default IP address is 255 255 255 255 Option Client SubnetMask Client Gateway DNS IP Address Domain Name Advanced Table 13 System Logs Option BIOS events Updating the BIOS Description Es NOTE This field is only relevant when the Integrated NIC control in the System Configuration group is set to Enabled with ImageServer and when Client DHCP is set to Static IP Displays the subnet mask of the client The default setting is 255 255 255 255 K NOTE This field is only relevant when the Integrated NIC control in the System Configuration group is set to Enabled with ImageServer and when Client DHCP
23. he order in which the computer attempts to find an operating system Boot Sequence Diskette drive SATA HDD Drive e USB Storage Device e CD DVD CD RW Drive e Onboard NIC e Boot List Option Allows you to change the boot list option Legacy UEFI Advanced Boot Options Allows you to Enable Legacy Option ROMs 33 Option Date Time Table 3 System Configuration Option Integrated NIC SATA Operation Drives SMART Reporting USB Configuration 34 Description e Enabled Legacy Options ROMs Default Enabled Allows you to set the date and time The changes to the system date and time takes effect immediately Description Allows you to configure the integrated network controller The options are Enable UEFI Network Stack e Disabled e Enabled e Enabled w PXE Default Enabled w Cloud Desktop Allows you to configure the internal SATA hard drive controller The options are e Disabled ATA AHCI Default Allows you to enable or disable the various drives on board e SATA O e SATA 1 Default Setting All drives are enabled Allows you to enable SMART reporting on hard drives during system startup e Enable SMART Reporting This option is disabled by default Allows you to enable or disable the internal USB configuration The options are e Enable Boot Support Rear USB Ports Port 1 left Port 2 Center Left Port 3 Center Right Port
24. ipset Table 15 Memory Feature Type Connectors Capacity Minimum Memory Maximum Memory Table 16 Video Feature Video Controller Integrated Discrete Video Memory Integrated 44 Specification e Intel Core i3 i5 series e Intel Celeron Dual Core e Intel Pentium Dual Core Up to 6 MB cache depending on processor type Intel H81 Chipset Specification up to 1600 MHz unbuffered non ECC dual channel DDR3 configuration two internally accessible DDR3 SODIMM sockets 2 GB 4 GB and 8 GB 2 GB 16 GB Specification e Integrated Intel HD Graphics 4600 Intel Core i5 e Integrated Intel HD Graphics 4400 Intel Core i5 e Integrated Intel HD Graphics Intel Pentium Celeron Dual Core AMD Radeon R5 A240 shared memory Feature Discrete Table 17 Audio Feature Controller Speaker Internal speaker amplifier Internal microphone support Volume controls Table 18 Communications Feature Network adapter Wireless Table 19 Cards Feature M 2 Table 20 Displays Feature Type Maximum resolution Refresh rate Operating angle Pixel pitch Dimensions Height Width Diagonal Specification 1GB DDR3 Specification ALC3661 CG Realtek single 4 ohms 2 W AVG speakers with 2 5 W Peak up to 6 W per channel single digital microphone Volume up down buttons Windows 7 only program menus and keyboard media control keys Specification Intel 10 100 1000 Mbps Ethernet LAN o
25. king tabs if you are disconnecting this type of cable press in on the locking tabs before you disconnect the cable As you pull connectors apart keep them evenly aligned to avoid bending any connector pins Also before you connect a cable ensure that both connectors are correctly oriented and aligned NOTE The color of your computer and certain components may appear differently than shown in this document To avoid damaging your computer perform the following steps before you begin working inside the computer 1 Ensure that your work surface is flat and clean to prevent the computer cover from being scratched 2 Turn off your computer see Turning Off Your Computer CAUTION To disconnect a network cable first unplug the cable from your computer and then unplug the cable from the network device Disconnect all network cables from the computer Disconnect your computer and all attached devices from their electrical outlets Press and hold the power button while the computer is unplugged to ground the system board aum pu Remove the cover CAUTION Before touching anything inside your computer ground yourself by touching an unpainted metal surface such as the metal at the back of the computer While you work periodically touch an unpainted metal surface to dissipate static electricity which could harm internal components Recommended Tools The procedures in this document may require the following tools Small f
26. lat blade screwdriver e Phillips screwdriver Small plastic scribe Turning Off Your Computer A CAUTION To avoid losing data save and close all open files and exit all open programs before you turn off your computer 1 Shut down the operating system e In Windows 8 Using a touch enabled device a Swipe in from the right edge of the screen opening the Charms menu and select Settings l b Select the O and then select Shut down Using a mouse a Point to upper right corner of the screen and click Settings l b Click the O and select Shut down n Windows 7 1 Click stan 2 Click Shut Down or 1 Click stan 2 Click the arrow in the lower right corner of the Start menu as shown below and then click mm Shut Down 2 Ensure that the computer and all attached devices are turned off If your computer and attached devices did not automatically turn off when you shut down your operating system press and hold the power button for about 6 seconds to turn them off After Working Inside Your Computer After you complete any replacement procedure ensure you connect any external devices cards and cables before turning on your computer 1 Replace the cover CAUTION To connect a network cable first plug the cable into the network device and then plug it into the computer Connect any telephone or network cables to your computer Connect your computer and all attached devices to their electrical
27. n LI 11 Removing the Back COVE eue tote Propio b ba rea aes Da a Pa M 11 nstalling the Back Cover Removing the Optical Drive n iere tree rd ea Here Feri Ade TA Pe da roy iets 12 stalling the Optical Drive x t e eet b Rente ene rice n pete Be ER Rete Rud 15 Removing the Hard Drives ace cie distin ded e o e Ot ea eer or oda 15 stalling the Hard Drive ete a edt tuer eed re a d ED OE e ae 15 Removing the Convertor Board sse nnne eene ennt eere nennen enn en nnns 15 nstalling the Convertor Board eae e een tea d reno a d En e op eR ve doa 16 Removing the MEMO Ai ene atti te D eb bo tp m Ete e S e RN 16 fistalling thie Memory A to eae ae ela awit aot ecto 17 Removing the System Board Shield 17 nstalling the System Board Shield ssssssssssssseeeee emere nnne 18 Removing the Heatsink nstalling the Heatsinks n ete eere re dese At ias pa Removing the Speakers nstalling the Speakers sperm o ec ee o Bi lee d abi e tel or tp e Pb ere it ede ae Removing the VESA Bracket 5 ito pode tidie aires 22 nstalling the VESA Bracket race BN Re cr a E ete NS NR ERR 22 REMOVING CHE System Fam nrin o Ed idet doe oe dotted a 22 ristalling the System Fi id rebut deris 23 Removing the Power Switch Board a P be od t t boe uet Pte 235 nstalling the Power Switch Board sss aE A rts n nitentes E 24 Removing the System Board i met en ete ta eo a St UE 24 nstalling the System Boadilla 26 Removing
28. n system board half mini card e Wi Fi 7260 agn ac Specification one Specification 19 5 inch HD WLED 1600 x 900 60 Hz 170 horizontal 160 vertical 0 27 mm 236 30 mm 9 30 inches 433 90 mm 17 08 inches 495 30 mm 19 50 inches 45 Table 21 Drives Feature Hard drive Optical drive optional Table 22 Ports and Connectors Feature Audio Network adapter USB 2 0 USB 3 0 Media card reader Table 23 Power Feature Type Frequency Voltage Rated output voltage Input current Output current Dimensions Height Width Depth Weight Temperature range Operating Storage Coin cell battery 46 Specification one 2 5 inch SATA drive one DVD ROM DVD RW Specification one universal audio jack Line out port one RJ45 connector four connectors in the back panel two connectors on the side panel one 4 in 1 slot Specification 180 W 50 Hz 60 Hz 100 VAC 240 VAC 19 50 VDC 2 9 A Maximum 12 0 V output 12VA 10A amp 12VB 14 54 K NOTE 12VB Rated at 0 4 A when in Standby Mode 30 00 mm 1 18 inches 76 20 mm 3 00 inches 155 00 mm 6 10 inches 0 58 kg 1 28 lb 0 C to 35 C 30 F to 95 F 40 C to 70 C 40 F to 158 F 3 V CR2032 lithium coin cell Table 24 Camera optional Feature Specification Image resolution 0 92 megapixel Video resolution 720p O 30 FPS HD Diagonal viewing angle 74 degrees Table 25 Stand Feature
29. nd to the computer Place and press the panel on the computer until it clicks into place Install stand cover Follow the procedures in After Working Inside Your Computer PWN EP Removing the Back Cover 1 Follow the procedures in Before Working Inside Your Computer 2 Remove a stand cover b stand 3 Perform the following steps as shown in the illustration a Using a scribe pry the edges of the computer 1 11 b Remove the back cover from the computer 2 Installing the Back Cover 4 Place the back cover on the computer Press at the corners of the back cover to secure it to the computer Install a stand b stand cover Follow the procedures in After Working Inside Your Computer Removing the Optical Drive 1 2 12 Follow the procedures in Before Working Inside Your Computer Remove a stand cover b stand c back cover Remove the screw that secures the optical drive to the computer Slide the optical drive out of the computer Installing the Optical Drive 1 Slide the optical drive to the computer and tighten the screw to secure it Install a back cover b stand c stand cover Follow the procedures in After Working Inside Your Computer Removing the Hard Drive 1 Follow the procedures in Before Working Inside Your Computer Remove a stand cover b stand c back cover Perform the following steps as shown in the illustration a Push the hard drive
30. p before attempting to delete or change the existing System and or Setup password You cannot delete or change an existing System or Setup password if the Password Status is Locked To enter the System Setup press lt F2 gt immediately after a power on or reboot 1 pl In the System BIOS or System Setup screen select System Security and press lt Enter gt The System Security screen is displayed In the System Security screen verify that Password Status is Unlocked Select System Password alter or delete the existing system password and press lt Enter gt or lt Tab gt Select Setup Password alter or delete the existing setup password and press lt Enter gt or lt Tab gt NOTE If you change the System and or Setup password re enter the new password when promoted lf you delete the System and or Setup password confirm the deletion when promoted Press lt Esc gt and a message prompts you to save the changes Press lt Y gt to save the changes and exit from the System Setup The computer reboots 43 gt Technical Specifications K NOTE Offerings may vary by region The following specifications are only those required by law to ship with your computer For more information about the configuration of your computer go to Help and Support in your Windows operating system and select the option to view information about your computer Table 14 System Information Feature Processor type Total cache Ch
31. rocedure in reverse order A A A gt gt X Es WARNING Disconnect all power sources before opening the computer cover or panels After you finish working inside the computer replace all covers panels and screws before connecting to the power source WARNING Before working inside your computer read the safety information that shipped with your computer For additional safety best practices information see the Regulatory Compliance Homepage at www dell com regulatory_compliance CAUTION Many repairs may only be done by a certified service technician You should only perform troubleshooting and simple repairs as authorized in your product documentation or as directed by the online or telephone service and support team Damage due to servicing that is not authorized by Dell is not covered by your warranty Read and follow the safety instructions that came with the product CAUTION To avoid electrostatic discharge ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface such as a connector on the back of the computer CAUTION Handle components and cards with care Do not touch the components or contacts on a card Hold a card by its edges or by its metal mounting bracket Hold a component such as a processor by its edges not by its pins CAUTION When you disconnect a cable pull on its connector or on its pull tab not on the cable itself Some cables have connectors with loc
32. some applications will improve with the additional cores All Enabled by default e 1 e 2 Allows you to enable or disable the Intel SpeedStep feature Default Setting Enable Intel SpeedStep Allows you to enable or disable the additional processor sleep states Default Setting Enabled 37 Option Limit CPUID Value Intel TurboBoost Table 7 Power Management Option AC Recovery Auto On Time Deep Sleep Control Fan Control Override USB Wake Support Wake on LAN WLAN 38 Description This field limits the maximum value the processor Standard CPUID Function will support e Enable CPUID Limit Disabled by default K NOTE Some Operating system will not complete installation when the maximum CPUID Function is greater than 3 Allows you to enable or disable Intel TurboBoost mode of the processor This option is enabled by default e Enable Intel TurboBoost Allows the Intel TurboBoost driver to increase the performance of the CPU or graphics processor Enabled by default Description Specifies how the computer will respond when AC power is applied after a AC power loss You can set the AC Recovery to Power Off Default e Power On e last Power State Allows you to set the time at which the computer must turn on automatically The options are Disabled Default Every Day e Weekdays Select Days Allows you to define the controls when Deep Sleep is enabled e Disabled e Ena
33. the Display Bracket icc cct rte trente e th e ed ee RR Ganda negada 27 nstalling the Display Bracket sss en entente 28 R moving the Galera a RR o e s 29 nstalling the Cameras cies oet et aet d od eie ete deae eee etae 30 Removing the MICFODhOne uie te eet eet e PU Hv ERO EU A RE E E dne 30 nstallingthe Microphone s etre et peer e Ae ar as Rc t ERR 31 4 System Setup ii o O EE O edad fecunda dada ea ares aries 32 Boot Sequences iss cana ata a gu E radio Mage ete Mag orale ie ene ade tah 32 avigation Keys aaa eet Ve hae feats diet di eens a ewan ts RIS 32 System Setup Optionsie site ach eee ion 33 Updating the BIOS gt aiena Ie cet b d td a ee etae E 41 Systemand Setup PASS WO dilaci n 42 Assigning a System Password and Setup Password iria serenata nn nnn cnn 42 Deleting or Changing an Existing System and or Setup Password 43 5 Technical Specification ica 44 6 Contacting DOM Te 49 Contacting Dell a tia 49 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety Unless otherwise noted each procedure included in this document assumes that the following conditions exist e You have read the safety information that shipped with your computer e A component can be replaced or if purchased separately installed by performing the removal p
34. under the Operating System drop down list select BIOS 9 Identify the latest BIOS file and click Download File You can also analyze which drivers need an update To do this for your product click Analyze System for Updates and follow the instructions on the screen 10 Select your preferred download method in the Please select your download method below window click Download File The File Download window appears 11 Click Save to save the file on your computer 12 Click Run to install the updated BIOS settings on your computer Follow the instructions on the screen System and Setup Password You can create a system password and a setup password to secure your computer Password Type Description System password Password that you must enter to log on to your system Setup password Password that you must enter to access and make changes to the BIOS settings of your computer A CAUTION The password features provide a basic level of security for the data on your computer CAUTION Anyone can access the data stored on your computer if it is not locked and left unattended K NOTE Your computer is shipped with the system and setup password feature disabled Assigning a System Password and Setup Password You can assign a new System Password and or Setup Password or change an existing System Password and or Setup Password only when Password Status is Unlocked If the Password Status is Locked you cannot change the System Password
Download Pdf Manuals
Related Search