Thinkware H100 drive recorder
Contents
1. Map AIS Man data 82013 SK planet Terms of Use A Playback gt or Checks the location E Ni i i E H m of the recorded rogress o na m video Enabled only REC 2014 04 02 20 89 6 Davi 115 8 if video is captured Current Playing Time S ja lag kes While connected Total Playing Time using GPS antenna optional in some models and also Driving Speed s 000 must be connected km h to Internet Playlist Impact Sensor Value I lt Play Previous Plays the previous file before the current file a Rewindby10Sec acted iecontinuesto rewind by 10 seconds E K H Play Pause Plays the recorded file temporarily pauses playback E Stop Stops the file being played The playback status resets to the starting point of the video p gt Fastforward by 10Sec Lac it continues to fast forward by 10 seconds gt EM Play Next Plays the next file after the current file MM AutoPlay Automatically loops the video back to beginning once the end has reached Nu Do Zoom _ Sets the video expansion ratio 0 5x 1 0x 1 5x 20x 0 LC 6 SereenSetting Sets brightness speed ofthe video SS we Save Savesthevideoinplay iz dE Volume 3F S SGSets the volume ofthe playback 23 3 1 5 View Video Playlist gt Select appropriate folder Continuous Recording Incident Recording Manual Recording Parking Motion Parking Incident to see the playlist for each recording mode PC Viewer guj Map Ei ONA asus ECH2. 2 9 2 Turning Voice Recording function On Off gt Press and hold the Voice Guidance button to turn the audio recording on or off Cautions O Users do not reserve the right to use the product for purposes other than as specified in this user guide According to the Personal Information Protection Act and other related regulations the user owner may be held liable if the video and or conversation recorded by the device are distributed without their con sent Thus special attention should be paid in using this product 18 2 10 Formatting MicroSD Card gt Disconnect the power cable While pressing the REC button connect the power cable to power the device on NI E Operation Status LED o Mo Left LED will alternately Off blink in green and red s s mc te Fe tt a et a i tt Cautions OThe microSD card should be formatted every 2 weeks to maximize the lifetime of the memory card 2 11 Upgrading Firmware gt The system will automatically be updated if the microSD card contains the firmware upgrade file L The device restarts automatically after the upgrade has been completed gt Make sure your device is always up to date with latest firmware Please check back frequently at THINKWARE website http thinkwaredashcam com for latest firmware updates N ip Operation Status LED 5 I sy I 24 1 r es ees Green li
3. 1 PC Viewer Dash cam setting Continuous Mode Resolution Front VGA 640 x 480 HD 1280 x 720 Number of frames 15 fps 9 30 fps video quality Front Low Impact sensitivity 000 km h Insensitive mM Sensitive Initialize gt Resolution Sets resolution of recorded videos in the Continuous Recording Mode Front Ly VGA 640X480 HD 1280X720 default gt Number of frames Sets the number of frames in Continuous Recording Mode LC 115 fps 9 30 fps default 26 3 1 8 Dash Cam Setting gt Continuous Recording Mode 2 PC Viewer Dash cam setting Continuous Mode Resolution Front VGA 640 x 480 O HD 1280 x 720 Number of frames 5 15 fps 9 30 fps video quality Front D Low Impact sensitivity 000 km h Insensitive Sensitive Initialize gt Video quality Sets the video quality level The video file sizes will vary according to the configured quality As the quality of the video increases the size of the videos will also increase resulting in reduced total recording capacity L Low The video file size will decrease Normal High The video file size will increase gt Impact sensitivity Set impact sensitivity from Level 1 to 10 1 is least sensitive 10 is most sensitive Cautions O Tip on sensitivity It is recommended that you set the sensitivity according to vehicle type High sensitivity setting is rec ommended for cars with softer rid
4. Move the file named Dashcam Viewer zip stored in the microSD card to the desktop 2 Right click on the mouse and select Open With gt Archive Utility to launch the Thinkware Dash cam viewer application E Dashi Open With Viewer Move to Trash Get Info Burn Dashcam Viewer 140413 zip to Disc Duplicate Make Alias Quick Look Dashcam Viewer 140413 zip Share Copy Dashcam Viewer 140413 zip Clean Up Selection Show View Options Tags 00006 Cautions O Mac OS X v10 6 6 or higher required for PC Viewer installation 21 3 1 3 Select the Device Drive for H100 Click File W from menu and select the drive for the portable storage drive for the connected mi croSD card 2 Select any file from the list to load entire video play list in the memory card Cautions O The drive for microSD card will not open if it has not previously been initialized in the dash cam O Record at least 1 video clip with the microSD card in the dash cam before being able to access full menu on Thinkware Dash Cam Viewer software 22 3 1 4 Thinkware Dash Cam Viewer Overview Full Screen Dash Cam Setting Information Switch between Front Rear View PC Viewer File Open a Rear View Enabled only if mi tout Map Satelite croSD card contains opd video captured Viewing Screen Za a aa using rearview 5 A NEN camera gene Cob
5. R R e e nee III nn e e K e m e e e e m m K K e e m m K e ee e R R R R R R ene ee ee R R R n ene e I O I e n e e e e e e e e e e e e K e e e e e e e o e e e e e n n n n K e R n n K R e n n e Connects to external GPS receiver optional accessory that requires separate purchase FOE ENS DONE ERNEST E SOOO a III ee IT IT eee eee ae een II II IT III eee eee III Indicator line to display horizontal axis to be used as reference during installation ee ee ee ee ee EEE sm a e e a EE RR TEETE ee el ee ee EE EEEE eR ppp ee eee eens cee eee eR nee ese nee eee Ii ii eee np neee nne nnn nene ees Microphone Records audio along with video 1 4 Inserting a Memory Card 1 4 1 About Memory Cards gt Class 6 or higher microSD card must be used with a storage capacity of 8GB or 16GB It is strongly recommended that minimum 8GB memory card is used for HD recording gt The microSD card should be formatted every 2 weeks to maximize the lifetime of the memory card 1 4 2 Installing a microSD Card Open the slot cover and insert the MicroSD card into the slot with the metal contacts facing up toward the mount connector and push until it locks into place Inserting the memory card 2 d R G D Removing the memory card MicroSD card Press the end of MicroSD card until it clicks out from the slot Pull out the MicroSD card and close the slot cover Do not apply exc
6. and the level of impact during the collision a eT TTT FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful inter ference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures K Reorient or relocate the receiving antenna K Increase the separation between the equipment and receiver gt Connect the equipment into an outlet on a circuit different from that to which the receiver is connected K Consult the dealer or an experienced radio TV technician for help FCC CAUTION Any changes or modifications to
7. high tempera ture and or humidity 4 Only use genuine accessories and peripherals from THINKWARE or authorized THINKWARE deal er THINKWARE does not warrant the safety and compatibility from use of peripherals from other manufacturers Use genuine parts supplied by THINKWARE Do not apply excessive force when pushing the buttons on the device Do not clean the Product using chemical cleaner or solvents as it may damage plastic components Use soft clean dry fabric to gently wipe the Prod uct Do not place or store the device where it can be accessible by children and pets 4 Do not disassemble the Product as it will void product warranty and may also damage the prod uct Handle with care Drop shock and mishandling of the Product may result in malfunction and or damage to the device 4 Do not operate this device while driving Install this device in a location where it has unob structed view of the road but does not interfere with the driver s view Check with your local and regional laws before mounting to windshield amp The device and or installation parts have moving parts and may shift in extreme road conditions such as unpaved road Check frequently to en sure the device is positioned as instructed in this guide 4 Do not operate or handle power cable with wet hands 4 Do not use a damaged power cable Keep the power cable away from heaters or other hot objects 4 Check that power cable with correc
8. or corrupted PC Viewerwill not be able to read videos or device settings on the microSD card In such case insert the microSD card back in the dash cam and power on the device to reinitialize which will create a setup cfg file with default settings 32 4 Specifications 4 1 Specifications The specifications of this product may change without prior notice for product improvements Standard SEE imail 108 5 x 45 2 x 26mm 75g 43x 1 8x 1 0 inches 0 17 Ibs Capacity microSD card 8GB 16GB Class 6 or higher E DDD i O eee eee nee eee ence eee eee eee a n eee eee eee eee eee eee eee scene O cee ee eens cee eee cee eee ee ee eee ee cee eee ee cee eee ee cee eee cee eee e n n e va iii p a R ia n n id i R R N ii N i i R a in i i i i ts i ss dy N E ii i i R a ii R ea is ip ij id i R N ia N in R era p i id i ii dd ij R ia ii R ia ij R ia ij p ra n wn d ra A n vi eee G P R r GE sees eee raa eee Se ee RE Gi Se ees ara eee Gio G MS O O O Tah eee n 5 no nr no H RRR Ha H R 0 Hoan H RRR Ha Rr Hon RHH RR OHO pR ndan rE 0 HEH R Hann R R Hd HERR Ha D E nda Bab p aH H HoH HR R Hn HHE R Ho H aE B H H Rahe B H HNR R H H h n H H Hab a n HR R Hn H e n a HH RR Ra HH RKR R H Daa n Ho Heb nonn Optional hardwiring cable and installa _ tion are required for continuous supply of power when vehicle ignition is off apna HEE n Haran E ra R rE n aa Barab HH EP a H R RH En a H abr r REER R H aE n Ea n a H abr see o R ER RH et n Tab n aE R a odes H aaa B H
9. time for which the device records video before and after impact can vary according to the device setting O Voice recording is turned off 14 2 6 Optional Recording Videos While Parked This feature is available only when the dashcam has been hardwired direct to the vehicle battery Separate purchase is required for the hardwiring cable accessory and installation is required 2 6 1 Incident Recording gt When the dash cam detects impact while parked it will imme diately store the previous 10 seconds prior to impact and start recording video for next 10 seconds which is then saved in a secure location on the microSD card under folder named parking rec Mi R Operation Status LED eee la 0 Ga ada Bluelighton Right LED alternates Green lighton Right LED alternates between blue and red between blue and red Voice recording is turned off N a m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m Ea O The device can record up to 1 minute if there are continuous impacts in case of multiple accidents O The time for which the device records video before and after impact can vary according to the device setting 2 6 2 Motion Detection Recording The dash cam and optional rear view camera are both equipped with motion detectors which are used to detect motion tha
10. Dash Cam Viewer setup file saved in the microSD card and install the program 4 Double click the Thinkware Dash Cam Viewer icon after installation completes The Viewer application 7 o screen will then appear Setup installed DASHCAM PC VIEWER successfully To launch it dick the shortcut PC Viewer To complete setup dick Finish 10 Click File Wy from menu and select the drive for the portable storage device assigned to the mi croSD card Select Additional functions gt Time zone and set the date and time of your location timezone Once the correct time has been set insert the microSD card immediately back in the dash cam and start the device to apply the changed settings 7 Insert the microSD card back into the device Note that the configuration information is stored in the microSD card so it is strongly recommended to format the memory card using device feature or Thinkware Dash Cam Viewer only Formatting the memory card using 3 party applications will permanently delete the user setting and will have to re initialize to default setting 11 2 3 Connecting External GPS Receiver Optional Accessory External GPS Receiver is available as an optional accessory that can be purchased from Thinkware autho rized dealers O External GPS Receiver enables recording of vehicle locations in the video file for driving route tracking gt Connect external GPS Receiver to the GPS
11. E deug 000 snn E ere at LLA Continu gus JN REC_2014 04_02_20_32_36_0 ay comb REC AMA 04 H 0 34 46 Davi obmb REC 2074 04 Do 0 ad a Davi Comb REC 2014_04_02_20_35_37_0 avi 9mb Manual MAN 2013 05 22 16 15 25 S a amb a IT 1 a REC AMA 04 02 36 do Davi 9Unp REC AMA 0012 datada Davi comb REC_2014_04_02_20_36_59_0 avi Sns REC 2014_04_02_20_39_39_0 avi GEmb nro aal H MA Dna Aan An MT OE lt s L Manual Recording Playlist tn i i i i i i i dd ad i r i ii i r a a r e T 24 3 1 6 Dash Cam Setting gt Common PC Viewer Dash cam setting Common Language O English O French Brightness Front Dark Voice recording Enabled C Disabled 000 Voice guidance km h Enabled Disabled Setting time Initialize Cancel gt Language Sets the language for the device gt Brightness Sets the brightness of the front and rear view camera gt Voice recording Enable or disable audio recording L Enabled default Disabled gt Voice guidance Enable or disable voice guidance L Enabled default Disabled gt Setting time Time zone Sets date and time for your location gt Daylight Saving Time Sets the daylight saving time DST on off gt Video date format Sets the date format of the recorded video files gt Speed unit Sets unit for the vehicle speed Km h or mph 25 3 1 7 Dash Cam Setting gt Continuous Recording Mode
12. For more information on the power cable routing instruction please visit Thinkware homepage http thinkwaredashcam com Preventing Vehicle Battery Discharge E Depending on the car make and model the power from the vehicle can be supplied even with the ignition turned off In this case the dash cam stays on as continuous mode and does not enter parking surveillance mode which will result in vehicle battery discharge m Some vehicles with multiple power sockets might be equipped with at least 1 outlet that does not shut off the power with the ignition So test each power outlet to ensure you connect to an outlet that shut off with vehicle engine 2 Basic Operations 2 1 Turning the Device Power On Off gt The device will automatically turn on and off with vehicle ignition Q Red 14 0 Green ED eras Blue O 18 O 18 Blinks in all 3 colors 3 Power cable for vehicle 2 2 Date Time Settings It is strongly recommended that the correct date time and time zone are set before using the device 1 Insert the microSD card into the USB microSD card reader included in the package with front side facing up as shown in the illustration 2 Connect the USB microSD card reader to the PC Ensure that the USB card reader is correctly orient ed when inserting to USB drive on the PC Removing microSD card 3 Double click the Thinkware
13. KWARE gt Every effort has been made to ensure this Guide s accuracy However we cannot guarantee the accuracy of the contents in this document as there may be technical errors omissions and or futures changes K THINKWARE reserves the right to change or modify the product and the content of this manual at any time without prior notice for product improvements gt Images contained in this user guide are illustrations for instructional purposes only and may differ from the actual product K Users do not reserve the right to use the product for purposes other than as specified in this user guide According to the Personal Information Protection Act and other related regulations the user owner may be held liable if the video and or conversation recorded by the device are distributed without their con sent Thus special attention should be paid in using this product O The microSD memory card should be tested for errors on a regular basis and as the memory card is a consumable item it will need to be replaced periodically O THINKWARE shall NOT be responsible for any problems and or damages that may occur from not using genuine or authorized parts and accessories The device and the recorded videos are intended for personal use and the recorded videos should be used for reference only The device does NOT guarantee video recording of all accidents as built in impact sensor may not be activated due to combination of user settings
14. L Low The video file size will decrease Normal High The video file size will increase 28 3 1 10 Dash Cam Setting gt Parking Surveillance Mode 2 Dash cam setting Parking Mode Impact sensitivity Insensitive Sensitive Motion detection Enabled O Disabled Insensitive m Sensitive HIGH Timer setting for stop recording 000 km h Time Initialize Cancel gt Impact sensitivity Sets the impact sensitivity level in parking mode gt Motion detection Sets motion detection sensitivity from Levels 1 to 10 L Enabled default Disabled gt Timer Setting for recording Dash cam can be configured to stop recording after preset time period during parking surveillance mode in order to prevent the vehicle battery from being discharged L Time Range 1 48 hours 7 levels gt Battery voltage setting for stop recording Dash cam can be configured to automatically shut down when battery voltage drops below preset value during park ing surveillance mode in order to prevent the vehicle battery from being discharged L Vehicle voltage 12V 11 6V 12 3V changeable by 0 1V L Vehicle voltage 24V 23 2V 24 6V changeable by 0 2V 29 3 1 11 Dash Cam Setting gt Additional Functions 1 gt Dash cam setting Additional functions Overwriting video Continuous recording Incident recording in continuous mode Parking motion Incident recording
15. O The set storage capacity may be different from the actual capacity by approximately 30 to 40MB gt Formatting memory card Formats the microSD card Note that dash cam setting is restored after format ting the memory card Cautions O It is recommended that you back up data before formatting the memory card O Once you format the memory card all data will be deleted and cannot be restored OThe method for formatting a microSD card might vary depending on the computer operating system 31 3 1 13 Dash Cam Setting gt Initialize Settings PC Viewer e MET ES eo e eo Re oo ee o Re eo o Re Ro e o aa Dash cam setting Common Language English O French Brightness Dark Front Voice recording O Enabled Disabled Voice guidance 000 mr Enabled Disabled Setting time Cancel gt Initialize Click Initialize button to restore back to factory settings gt Apply and Save Settings 1 Click Save after changing settings to store the configuration information on the microSD card 2 The setting file is stored on the microSD card as setup cfg under Setting folder Plas S E E EEN NE 3 Insert the microSD card into the dash cam and turn on the device to apply the settings Cautions O Thinkware Dash Cam Viewerrequires setup cfg file on the microSD card in order to recognize the external drive as dash cam memory device If setup cfg is deleted
16. THINKWARE DASH CAM H100 User Manual C RoHS This Dashboard Camera dash cam is a specialized onboard device that continuously records video while the vehicle is in use Some features may not be available depending on installation driving conditions and vehicle type The video quality might vary for each device as a result of installed firmware The device DOES NOT guarantee video recording of all accidents as built in impact sensor may not be activated due to combina tion of user settings and the level of impact during the collision Before Using THINKWARE DASH CAM H100 FCC Statement Caution Getting Started 1 1 In the Package 1 2 Optional Accessories 1 3 Product Overview 1 4 Inserting a Memory Card 1 5 Vehicle Installation 2 1 Turning the Device Power On Off 2 2 Date Time Settings 2 3 Connecting External GPS Receiver Optional Accessory 2 4 Recorded Files 2 5 Recording Videos While Driving 2 6 Optional Recording Videos While Parked 2 7 Manual Recording 2 8 Capturing Still Images 2 9 Setting Audio Options 2 10 Formatting MicroSD Card 2 11 Upgrading Firmware PC Application 3 1 Thinkware Dash Cam Viewer Device Information 4 1 Specifications NO NO WM Bf A 10 12 13 14 15 16 17 18 19 19 20 33 Before Using THINKWARE DASH CAM H100 gt Under the copyright laws this manual may not be copied in whole or in part without the written consent of THIN
17. afao E n B a B n n H a B ab m a H Tab n Hr eee eset HH ab nira HH ab n ra H aaa raa H aaa b n ara ees Recording mode 5 nida nr nda Haan Ha H E n Ha H EET Se R peat H G aper R Ha H RE H aH abr Ha BEE HHE H HH E R Ha Haha bna H ER nia R rE H HEE R E HHE R HHE R H haho R oles eee eee a He n R i Ha n H ERa R i H Ee n ri HH Re Ria HH Re n oi D rahe no p ree ndo prn Audio Recording out Choose from one of three different Total recording time varies depending on modes low mid high _ the partition type amer 20Megapixel 1 3 2 CMOS ew angle Approximately 140 diagonally p Video HD 1280x720 H 264 extension AV E Framerate 1 channel Frontview upto30fps Audio PCM Pulse code modulation feeen EKN EEKAN pp PS PD PD O PS PR PR IP OPS n m n an n mn R aa R ma R mma n nn R ea R a R an n mnn n n nma nR en maa n Ra en man Ra n nenn Ra n wan n Kaa n nenn Ran R nanna R nnn mmaa R nnn nnn R nnn mna gn n R Ra gR nn R ma g Rann R mna g manan mwan T e e c r e c e r i e e e e e e ee e ee n e r r n ie sn oe e n n ee ee e e e n e se h e ee e e ee e e n e ee n e e n ee ee e e ee n ee n ee n e e r eee eee n eee n eee eee Optional accessory that requires separate purchase E Inputpowersource DMD Current consumption 3AWMa Auxiliary power unit Super Capacitor Security LED Panoramic whiteLED E Notification LED 3 colorLED PrearlED E Warning sound Embedded speaker Voice buzzer sound guidance 96 D ene ee e e e e r a e
18. e manual_rec folder gt Note that when manual recording is initiated the previous 10 seconds prior to pressing the button will be saved so even if you just missed a scene you can still capture and safely store the video by initiating manual record within 10 seconds of the event A i R EEE K K E E E E E R N T PY manual rec Wen oe i manual_rec E E PAS E o di motion_rec I gT narvina rar as SM CO O eo Mi E Operation Status LED O Voice recording istumedon S Voice recording is turned off lea Mo No om Mi aes o q Bluelighton Blue light blinking Green lighton Blue light blinking ee ee ee Cautions O When the allocated storage for manual recording videos is full oldest video file will be replaced by the new recorded video 16 2 8 Capturing Still Images gt Press and hold REC button to take a photo Buzzer will sound to indicate that a picture has been successfully taken L Still images captured are saved in a secure location on the microSD card under folder named capture frre a Se eee Se Se eR a eS l m capture 1 Core Sense CY J QUalsave A JR evt rec i Ja manual rec do motion rec O up lf mt ma SS i i ma i hr pl i Ien Ten ar mrn 17 2 9 Setting Audio Options 2 9 1 Turning Voice Guidance Function On Off gt Briefly press the Voice Guidance button to turn the voice guidance on or off
19. e such as luxury sedans and low sensitivity setting is recommended for cars such as performance cars trucks or SUVs which tends to have stiffer suspension settings 27 3 1 9 Dash Cam Setting gt Parking Surveillance Mode 1 This feature is available only when the dash cam has been hardwired direct to the vehicle battery Separate purchase is required for the hardwiring cable accessory and installation is required Dash cam setting Parking Mode Parking Mode C Enabled Switch to Parking Mode once the engine is turned off O Disabled Turn off the dash cam once the engine is turned off Resolution Front VGA 640 x 480 O HD 1280 x 720 Number of frames 15 fps o 30 fps video quality 000 km h Front i Low Impact sensitivity Initialize Cancel gt Parking Mode Dash cam automatically changes recording mode to parking surveillance when vehicle ignition is turned off L C1 Enabled Disabled default gt Resolution Sets resolution of recorded videos in the Parking Surveillance Mode Front L VGA 640X480 HD 1280X720 default gt Number of frames Sets number of frames for Parking Surveillance Mode LE 15 fps 30 fps default gt Video quality Sets the video quality level The video file sizes will vary according to the configured quality As the quality of the video increases the size of the videos will also increase resulting in reduced total recording capacity
20. essive force on the MicroSD card or attempt to insert it in the wrong direction as it may cause damage the MicroSD card and the card slot Cautions O The microSD card should be tested for errors on a regular basis and as the memory card is a consumable item it will need to be replaced periodically O THINKWARE shall NOT be responsible for any problems and or damages that may occur from not using genuine or authorized parts and accessories Itis strongly recommended that THINKWARE memory card is used to minimize memory card error O Turn the device off completely before removing the microSD card to avoid damages to the memory card O To prevent loss of important data frequently copy recorded video from microSD card to another storage device such as personal computer for back up 1 5 Vehicle Installation 1 5 1 Connecting the Device and the Mount 1 Place the mount so it is aligned with the connector A and push it toward B until it clicks into place 2 Remove the protective film from the camera lens 1 5 2 Installing the Device 1 Clean the area on the windshield where the dash cam will be installed 2 With dash cam main unit still attached to the mount remove the protective tape from the back of the mount 3 Attach the adhesive side of the mount on the wind shield where it has unobstructed view of the road but does not interfere with the driver s view The camera is located
21. fy saved files in the microSD card This may result in unexpected behavior during operation 13 2 5 Recording Videos While Driving 2 5 1 Continuous Recording Mode gt Videos are recorded in 1 minute segments and saves as files in the microSD card under folder named Cont rec NI s L Operation Status LED de naan l Z Voice recording is turned an Voice recording is turned off i LG nR L GDR Blue light on Blue light on Green light on Blue light on See eee ee ee ee ee ee ee ee ee m ee ee eee ee ee ee ee eB ee m ee ee eee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee eZ gt When the dashcam detects impact it will immediately store the previous 10 seconds prior to impact and start recording video for next 10 seconds gt This 20 second video will then be saved in a secure location on the microSD card under folder named evt rec Note that the dashcam will detect impact as incident only if the level of impact is greater than the sensitivity of the G sensor set in the user configuration NI S E Operation Status LED jiii LS 9 9 RIL aa Blue lighton Right LED alternates Green lighton Right LED alternates between blue and red between blue and red ao Cautions O Driving over speed bump manhole or uneven road at high speed can also be detected as incident O The device can record up to 1 minute if there are continuous impacts in case of multiple accidents O The
22. ght blinking Green light blinking Ne E ju ff ru a 19 3 PC Application 3 1 Thinkware Dash Cam Viewer Thinkware Dash Cam Viewer for both Windows MacOS is provided which can be used to watch videos re corded with the dash cam The video files recorded by the dash cam are in one minute segments and the PC viewer allows user to watch the segments in single continuous video The setup file for the Thinkware Dash Cam Viewer is included in the microSD card in the package Please check THINKWARE homepage http thinkwaredashcam com for latest Dash Cam Viewer application 3 1 1 Thinkware Dash Cam PC Viewer Software 1 Insert the microSD card into the USB microSD card reader included in the package with front side facing up as shown in the illustration 1 I I I I I I I I 2 Connect the USB microSD card reader to the PC Ensure that the USB card reader is correctly oriented when inserting to USB drive on the PC 20 3 1 2 Installing Thinkware Dash Cam Viewer 1 Double click the Thinkware Dash Cam Viewer setup file saved in the microSD card to initiate program installation DASHCAM PC VIEWER is successfully installed 2 Double click the application icon once PC Viewer Setup installed DASHCAM PC VIEWER successfully To launch it click the s s short installation completes and the application main screen will then appear 1
23. in parking mode Manual recording Security LED O mode C CHEOD irao Omodez CEE CD prag Mode 3 Depends on recording mode O Disabled Memory partition Typefrecommended B Type Continuous recording Sy icc T 1 SC E 0 r a e gt Overwriting video The oldest file is deleted if the total size of the recorded videos in the checked folder exceeds the storage capacity of the memory card gt Security LED Sets the pattern of the Security LED which is used to visually alert other drivers that the vehi cle is equipped with functional dash cam L Mode 1 moving LED moves from top to bottom and vice versa C7 Mode 2 blinking The entire LED blinks every 0 5 seconds 77 Mode 3 expanding LED expands and fades out to top bottom starting from center Not in Use Security LED is turned off default 30 3 1 12 Dash Cam Setting gt Additional Functions 2 Dash cam setting Additional functions Omodez QI GED sinking Mode 3 Depends on recording mode Disabled Memory partition Typefrecommended B Type Continuous recording Incident recording in continuous mode Parking motion Incident recording in parking mode Manual recording 000 mr Formatting memory card Formatting Initialize Cancel gt Memory partition Sets how storage space on the memory card will be allotted for each recording mode preconfigured type A B and C
24. on the left side of the main unit so in stall the dash cam on the right side of the center behind the rearview mirror To ensure that the mount is safely secured it is recommend ed that you separate the device from the mount after instal lation and press the mount towards windshield for 5 min utes to maintain pressure Allow 24 hours until the adhesive on the mount has set before connecting the dash cam 4 The dash cam should be facing forwarding and PET sard level with the vehicle and the road Adjust the F camera using the level guiding line marked on the E date side of the device Adjust the camera to have the horizontal indicator on the dash cam to be level with the vehicle and the road After installation run the dash cam to record videos and check the videos using Thinkware Dash Cam Viewer to verify camera position Adjust the camera angle if necessary 1 5 3 Connecting to power 1 Connect the power cable to DC IN socket of the device 2 Plug the charger adapter end of the power cable into a 12V DC vehicle power socket 3 Arrange the wire by using the adhesive cable holder as shown below pis a da sd E av i mi fe ina cv ss ad mc em ne a a nM ni E E E FV mk mina i a va i cae Hide the extra wires by placing the wires in the space between the ceiling of vehicle Recommended location for ad and the top of the windshield hesive wires clips are illustrated in the diagram O s da em
25. port of the dash cam 14 lt s gt O amp O w Blue light blinking Indicates current recording status Cautions O THINKWARE shall NOT be responsible for any problems and or damages that may occur from not using genuine or authorized parts and accessories Itis strongly recommended that THINKWARE external GPS receiver is used O Turn the device off completely before connecting the GPS receiverto avoid damages 12 2 4 Recorded Files gt Recorded video files are saved in the folder by date and hour in the microSD card L Files are created based on the time when the videos are recorded RES RR Men U9 es av a Ga ry cont rec REAR Year Month Day Hour Second EVLIEL q x Minute Ji manual rec m motion rec ey L As a surveillance product the dash cam will automatically SE zT EE aw S overwrite oldest file in the memory card once the memory B 01211 1623 a n is full However event recording and manual recording RSE 012 Ta TO i z avi i videos are stored in separate location and will be protected an ne X ene EGIREC 2012 11 07 160 A 74 532KB from file overwriting Hg REC_2012_11_07_16_08S 254i 74 402KB EREC 2012_11_07_16_10_25 avi 74 405KB fg REC _2012_11_07_16_11_23 avi 74 513KB fg REC _2012_1 1_07_16_12_25 avi 74 466KB Meal REC_2012_11_07 1613 74 446KB Cautions O Do not use microSD as external storage device O Do not save or modi
26. r User Manual stored in the MicroSD card 1 2 Optional Accessories pj che i eg SG EE bt T Ski he po is t iar at re Hardwiring Cable External GPS Receiver 1 3 Product Overview Front 3 Rear Left view Top view Top view Camera Lens III en a e e K e e m m K e K e e m e e e R R R RR RRR O o opa opa apo R nee ee EEE EES nn e K e e e e K e e m m K K e e m m K e e R R R R R R ee ee ee ese n n ene e LED light that is used to visually indicate that the vehicle is equipped with dash cam which is in operation FR An pA A RACISM AAA RCRA AA CRSA AAEN AAEN ACA ROH RASA SACACH ACA RORC ALATA RACHA AERA NR AA A A e e e e e e e e e e e e e e e e e e e e e e e e e o e e e e e n n n n n e e e n e e n e ELIANE HERE HEMEROTECA III IT III II ennenen pennn ennn nenn nenn nnn nenen ennenen ennenen nnm nenn ee neng III IT II ennenen II IT IT II E e O c r e e e e c r e e e ce e e r r r e e r e e e O PO O O PO ee ee ree n e III nn DS m e e K e e e m m K e K e e m e K e e R e n R RR R en R R ene e Activates deactivates voice guidance or press and hold to turn audio recording on off ER AH ORR anaa AAAA AARAA AA ANAA HATA HRA AACN ACA CRRC REM ACA RCRA ARCA DADA DNAn nn AA AA e e e e e e e e e e e e e e e e e e e e e e e e o e e e e e n n n n e e e n e n e III nn DES m en e e m m K e e e m m e e e n R R R ene nn ee ne ee R
27. r e e r K a e n R a e n R eens eee K a K eee K a e sees sees e scenes cee R E e sees seen scenes n K a R e K a R n K e R n e e R n e e scenes e R n K e R n K e R e K a R a 0 n R a 0 n R n e Operation Storage Temperature Connection Interface 20 C to 65 C 40 C to 80 C 4 F to 149 F 40 F to 176 F External GPS een a oo ine ei 6 m era n e 6 mera ee ea eee ee e E O maa n in R en iin mo ie nin eine ae nn maa in n n ini in inne ain nie i ie R R i ie e i mo ie ee eee ees
28. t connector is used and the connections are secure and firmly in place 4 Do not pull insert or bend the power cable using excessive force 4 Do not place heavy objects on the device and the power cable 4 Do not modify or cut the power cable 4 gt THINKWARE does not guarantee that devices or peripherals not authorized by THINKWARE will be compatible with its Product 4 Do not attempt to insert foreign objects into the device or power cable Do not spill or spray liquid into the device as it may cause malfunction fire or electric shock This device is intended to be used inside the ve hicle only 1 Getting Started This unit was tested with shielded cables on the peripheral devices Shielded cables must be used with the unit to insure compliance 1 1 In the Package SO gt ss ds in a E L E P i E ge cv EV SS digas ss Es dA E R a iS Ss E i K E RSA End ENA E a i aS Mount with 3M tape Adhesive Cable Holder Car Charger 1ea 5ea Main Dash Cam Unit a a p a K ee K a t a ee e ba E T p bet ra a Ka a e m P Kat K a Pa Pa Ka p a l Pa Ka K a a a et a a Ka Pa P a a l P a r a a P ba G H ee K K p a l Pa P Ka t a K e Pa Ka e b Ka E Pa Ka a K a a Pa a t t a r ea P Kat t K K ea a K pa a P Pa rat ra a a P Kat a ee ee ee K a t E et K a ee eee a l P Kat T a l P t 9 a a P Ka a a a P l K t a a K ka ba a g P a es MicroSD memory card with adapter USB MicroSD card Quick Start Guide Warranty consumable reade
29. t initiates video recording while the vehicle is parked gt When the dash cam detects impact while parked it will immediately store the previous 10 seconds prior to impact and start recording video for next 10 seconds which is then saved in a secure location on the microSD card under folder named motion rec NI R ee 2 Voicerecordingistumedon Q Voice recording is turned off ese asa Bluelighton Right LED alternates Greenlighton Right LED alternates between green and red between green and red We ee ee ee ew ee ee ee ee ee m ee m m m ee m ee m m m ee ee ee m m m ee ee ee ee m ee ee m ee ee ee ee ee ee ee ee ee ee ee ee ee E Ea O The device can record upto 1 minute if there are continuous impacts in case of multiple accidents 15 2 7 Manual Recording In addition to recording accidents the dash cam allows the user to initiate manual recording mode to cap ture scenery and or places while driving This feature can also be used to save video as witness where the installed vehicle is not directly involved in an accident Video files saved during manually recording mode are stored in a separate location on the memory card and will be protected from video overwriting in continuous recording mode gt Briefly press the REC button to start recording The device will record video for 1 minute 10 seconds before and 50 seconds after as of the time when the button is pressed The recorded video will be saved under th
30. the equipment not expressly approved by the party responsi ble for compliance could void your authority to operate the equipment This Class B digital apparatus complies with Canadian ICES 003 2 Caution This device is designed to record video while the vehicle is in operation The quality of the video might be affected by weather conditions and the road environment such as day or night presence of street lighting entering exiting tunnels and surrounding temperatures 4 gt THINKWARE is NOT responsible for the loss of any recorded video during operation Although designed to withstand high impact of car collision THINKWARE does NOT guarantee re cording of accidents where the impact may cause the device to be damaged Keep the windshield clean for optimal video qual ity 4 If a foreign substance e g fingerprints is attached to the lens this might reduce the quality of the recorded videos Keep the lens clean all the time The specified operating temperature of this prod uct is 20 C to 65 C 4 F to 149 F and storage temperature is 40 C to 80 C 40 F to 176 F En sure that the device is kept within these tempera ture ranges otherwise the device may not func tion as designed and at extreme temperatures permanent physical damage can result which is not covered by warranty Avoid placing the device under direct sunlight 4 Avoid using the Product in extreme conditions where the Product is exposed to
Download Pdf Manuals
Related Search