iconBIT FTB12000JS JUMP STARTER
Contents
1. again within 5 seconds the second level of brightness will turn on medium Triple continuous pressing Lamp button starts the third level of brightness minimum To turn the lamp off wait for 5 seconds and then shortly press Lamp button N w gt 4 505 signal on off 1 Long press the Lamp button 3 sec to turn SOS signal on 2 Long press the Lamp button 3 sec to turn SOS signal off Car start Applied only to 12 V car battery 1 Connect red clamp to the positive contact of the car battery then connect black clamp to the negative contact 2 Connect mini Jumper clamps to the FTB12000JS 12V out Disconnect the car battery if it is completely discharged 3 Start up the ignition According to experience if engine doesn t start after 3 5 seconds please wait for 1 minute and then repeat starting 4 Disconnect mini Jumper clamps from the FTB12000JS 5 Disconnect mini Jumper clamps from the car battery Charging mobile devices Notebooks Tablet PCs Smartphones cell phones Charge your mobile phone 1 Use original or standard USB cable to connect the device Charge your laptop or other devices 19V 1 Choose the correct connector for laptop DC input port 19V 2 Connect the power bank to laptop using the DC cable You can charge FTB12000JS using wall charger or car charger Warning Never allow red and black clamps to touch each other or another common metal con2. OiconBiT FTB12000JS Multi Function Jump Starter USER MANUAL Get to know your device Lamp button Sos PC out USB out ON OFF Flashlight Battery clip interface Lamp SOS Charge indicator Flashlight Features 1 In case a car battery cannot start the car this device can play the role of emergency ignition 2 High capacity of 12000mAh 3 Built in LED light and SOS signal function 4 Power bank for laptops 19 V tablet PCs 5V MP3 MP4 mobile phones portable game consoles etc 5 Multiple safety protection system to ensure devices safety protection against overcharge overvoltage overcurrent and short circuit 6 Small size light weight easy storage The device is much more easy to use compared to traditional electric cable Specifications Battery Type Output Peak current Li polymer DC 12V for car 200A Battery Capacity DC 19V Size 12000mAh 44 4Wh USB 5V 163 x 87 x 37 3mm Input Weight DC 19V 2A 500g Buttons 1 Power on off Short press Power button to turn the charge indicator on off Note The device will turn off automatically after 90 seconds of no load 2 Flashlight on off Long press Power key 3 sec to turn flashlight on Repeat long press Power key 3 sec to turn flashlight off N 3 Lamp SOS on off Press shortly Lamp button to turn on first level of brightness of the lamp maximum If this button is pressed
3. ductor this could cause damage to the unit and or create a sparkling explosion hazard The product should be stored at temperatures above freezing to prevent damage The unit is suitable for engine start up to 3 liters This system is designed to be used only on vehicles with a 12 V battery system do not connect to a 6 Vor 24 V battery system It is necessary to disconnect the jump starter from the car battery within 30 seconds after engine start Do not disassemble the device yourself It may be dangerous Keep the device in dry place Do not expose it to high temperatures Please fully charge the power bank at first usage Keep the power bank away from children Please make a complete charge every four month to avoid shortening life span Accessories 1 AC Adapter 2 DC Cable 3 USB Cable 4 Battery clip 5 Notebook connectors www iconbit com
Download Pdf Manuals
Related Search