Siig CN-GP4111-S1
Contents
1. Network At New Interface Deteced click OK Skip this step if not prompted 3 After the driver is succesfully installed the card is ready for use The bullet before PCI Ethernet should be green see Figure 2 Green bullet stands for successful driver installation Location Automatic HA PCI Eth t Slot 2 Connected Status Connected PCI Ethernet Slot 2 is currently active and Ethernet 1 has the IP address 192 168 0 131 Not Connected Ethernet 2 7 LS PE ae Configure Using DHCP FireWire IP Address 192 168 0 131 Not Connected Subnet Mask 255 255 255 0 LAN7500 Aad Not Connected Router 192 168 0 2 Ethern or en3 gt DNS Server 192 168 0 2 Not Connected Search Domains Crai N MEN Click the lock to prevent further changes C Assist me Revert C Apply Figure 2 Technical Support and Warranty QUESTIONS SIIG s Online Support has answers Simply visit our web site at www siig com and click Support Our online support database is updated daily with new drivers and solutions Answers to your questions could be just a few clicks away You can also submit questions online and a technical support analyst will promptly respond SIG offers a 3 year manufacturer warranty with this product This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for three 3 years fro2. D Windows Win 8 setup exe click OK Change D to match your CD DVD ROM drive letter For Windows 7 Server 2008 R2 Type D Windows Win7_2008R2 setup exe click OK Change D to match your CD DVD ROM drive letter 3 At the User Account Control click Yes For Server 2008 R2 skip this step 4 At Welcome click Next 5 At Ready to install the program click Install Skip this step if not prompted 6 Please wait while the driver install process continues 7 Click Finish to complete the installation Windows Vista 32 64 bit Server 2008 32 64 bit 1 Insert the driver CD Close the CD autoplay 2 window if prompted Click Start Run type D Windows Win Vista_2008 setup exe then click OK 7 Or at the Start search box type D Windows Win Vista_2008 setup exe then press Enter Change D to match your CD DVD ROM drive letter At the User Account Control click Continue For Server 2008 skip this step At Welcome click Next Click Install Skip this step if not prompted Please wait while the driver install process continues Click Finish to complete the installation Windows XP 32 64 bit Server 2003 32 64 bit 2000 dis Click Cancel at the Found New Hardware Skip this step if not prompted Insert the driver CD close the CD autoplay window if prompted Click Start Run type D Windows Win 2K_XP_2003 setup exe click OK Change D to match your CD DVD ROM drive letter
3. 4 At Welcome click Next 5 Click Install Skip this step if not prompted 6 Click Finish to complete the installation To Verify Windows Installation 1 Go to Device Manager to verify installation For Server _2012 2012R2 Click Control Panel Hardware then Device Manager For Windows 8 7 XP Server 2003 2008R2 2000 Right click Computer or My Computer click Manage then Device Manager For Windows Vista Right click Computer click Manage Continue then Device Manager For Windows Server 2008 Right click Computer click Manage double click Diagnostics then click Device Manager 2 Double click Network adapters either Realtek PCIe GBE Family Controller or Realtek RTL PCI E Family Gigabit Ethernet should be displayed four 4 times Mac OS Installation 1 Install the board and boot up the computer 2 SION et S Insert the driver CD then double click the MAC OS X folder Double click 10 5 x 10 6 x or 10 7 x folder then double click RTGNICv2 0 6 mpkg At Introduction click Continue At Read Me click Continue At License click Continue click Agree At Installation Type click Change Install Location if you want to change the default saving folder otherwise click Install Type in Name and Password click OK or Install Software Click Continue Installation then click Restart to restart the computer To Verify Mac OS Installation J 2 Click System Preference then click
4. A DP 4 Port Gigabit UC Ethernet PCle Installation Guide Introduction The DP 4 Port Gigabit Ethernet PCIe adds four 10 100 1000 Mbps Ethernet ports to your system Features and Benefits e Add a 4 port Gigabit Ethernet PCI Express adapter to your PC or Server e Compliant with IEEE 802 3 IEEE 802 3u IEEE 802 3ab e Supports 10 100 1000Mbps data rate auto negotiation e Supports Crossover Detection and Auto Correction e Supports Full Duplex flow control IEEE 802 3x e Installs in standard height or low profile chassis with included brackets e Supports Wake on LAN WOL power management 04 0959B 1 System Requirements Desktop computer with an available 4x or larger PCle slot Windows 8 32 64 bit 7 32 64 bit Vista 32 64 bit XP 32 64 bit 2000 Windows Server 2003 32 64 bit 2008 32 64 bit 2008 R2 2012 Server 2012 R2 MAC OS X 10 5 x or newer Package Contents DP 4 Port Gigabit Ethernet PCle Low profile bracket Driver CD Installation guide Layout Activity LED upper Activity LED lower RJ45 port Figure 1 Layout LED Indicators Two LEDs to monitor your network link speed Activity LED upper Blinking green light 10 Mb s or 100 Mb s network connection and network activity Activity LED lower Blinking orange light Gigabit 1000 Mb s network connection and network activity Hardware Installation The design of computer cases and motherboards va
5. ice may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE SUG Inc 6078 Stewart Avenue Fremont CA 94538 3152 USA Phone 510 657 8688 DP 4 Port Gigabit Ethernet PCle is a trademark of SIIG Inc SHG and the SHG logo are registered trademarks of SIIG Inc Microsoft and Windows are registered trademarks of Microsoft Corporation Mac and Mac OS are registered trademarks of Apple Computer Inc All other names used in this publication are for identification only and may be trademarks of their respective owners June 2014 Copyright 2014 by SIG Inc All rights reserved
6. m the date of purchase of the product SHG will at our discretion repair or replace with an identical product or product having similar features and functionality the product if defective in materials or workmanship This warranty gives you specific legal rights and you may also have other rights which vary from state to state Please see our web site for more warranty details If you encounter any problems with this product please follow the procedures below A If it is within the store s return policy period please return the product to the store where you purchased from B If your purchase has passed the store s return policy period please follow the steps below to have the product repaired or replaced Step 1 Submit your RMA request Go to www siig com click Support then REQUEST A PRODUCT REPLACEMENT to submit a request to SIG RMA or fax a request to 510 657 5962 Your RMA request will be processed if the product is determined to be defective an RMA number will be issued Step 2 After obtaining an RMA number ship the product e Properly pack the product for shipping All accessories that came with the original package must be included e Clearly write your RMA number on the top of the returned package SIIG will refuse to accept any shipping package and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton e You are responsible for the cost of shipping
7. ry refer to your computer s reference manual for further information if needed Discharge any static electricity build up in your body by touching your computer case for a few seconds Avoid any contact with internal parts and handle cards only by their external edges 1 2 Turn OFF the power to your computer Unplug the power cord remove the computer cover Remove the slot bracket from an available PCI Express slot Carefully align the card to the selected PCI Express slot push the board down firmly but gently until it is well seated Replace the slot bracket holding screw to secure the card Replace the computer cover and reconnect the power cord Windows Installation Install the board and boot up Windows then follow the instructions below to install the DP 4 Port Gigabit Ethernet PCIe drivers NOTE Some Windows OSes will automatically search preconfigured driver folder for the proper driver this process may take several minutes to complete Do not interrupt this process Server 2012 Server 2012 R2 For Windows Server 2012 and 2012 R2 the driver is embedded in the system No driver installation is needed Simply insert the card and turn on the computer the DP 4 Port Gigabit Ethernet PCIe is ready for use Windows 8 32 64 bit Windows 7 32 64 bit Server 2008 R2 1 Insert the driver CD Close the CD autoplay window if prompted 2 Click Windows key and R For Windows 8 Type
8. to SUG Ship the product to the following address SIIG Inc 6078 Stewart Avenue Fremont CA 94538 3152 USA RMA e SIG will ship the repaired or replaced product via Ground in the U S and International Economy outside of the U S at no cost to the customer 11 About SIIG Inc Founded in 1985 SIIG Inc is a leading manufacturer of IT connectivity solutions including Serial ATA and Ultra ATA Controllers FireWire USB and legacy I O adapters that bridge the connection between Desktop Notebook systems and external peripherals SIIG continues to grow by adding A V and Digital Signage connectivity solutions to our extensive portfolio SIIG products offer comprehensive user manuals many user friendly features and are backed by an extensive manufacturer warranty High quality control standards are evident by the overall ease of installation and compatibility of our products as well as one of the lowest defective return rates in the industry SIIG products can be found in computer retail stores mail order catalogs through major distributors system integrators and VARsin the Americas and the UK and through e commerce sites PRODUCT NAME DP 4 Port Gigabit Ethernet PCle FCC RULES TESTED TO COMPLY WITH FCC PART 15 CLASS B OPERATING ENVIRONMENT FOR HOME OR OFFICE USE FCC COMPLIANCE STATEMENT This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This dev
Download Pdf Manuals
Related Search