Losi Mini 8IGHT-T RTR TRUGGY
Contents
1. NO OTHER WARRANTY OR REPRESENTATION AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON INFRINGEMENT MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE PURCHASER AC KNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER S INTENDED USE Purchaser s Remedy Horizon s sole obligation and purchaser s sole and exclusive remedy shall be that Horizon will at its option either i service or ii replace any Product determined by Horizon to be defective Horizon reserves the right to inspect any and all Product s involved in a warranty claim Service or replacement decisions are at the sole discretion of Horizon Proof of purchase is required for all warranty claims SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER S SOLE AND EXCLUSIVE REMEDY Limitation of Liability HORIZON SHALL NOT BE LIABLE FOR SPECIAL INDIRECT INCIDENTAL OR CONSEQUEN TIAL DAMAGES LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT WARRANTY TORT NEGLIGENCE STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Further in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted As Horizon has no control over use setup final assembl2. accordance with ISO IEC 17050 1 lt BY USERS IN THE EUROPEAN UNION No HH2014022804 This product must not be disposed of with other waste Instead it is the user s responsibility Product s LOS 1 14 Mini SIGHT T RTR includes Spektrum to dispose of their waste equipment by handing it over to a designated collections point for DX2E Transmitter with Spektrum SRS4200 Receiver the recycling of waste electrical and electronic equipment The separate collection and recy cling of your waste equipment at the time of disposal will help to conserve natural resources Item Number s LOSOTOOOEU LOS01000UK and ensure that it is recycled in a manner that protects human health and the environment Equipment class 2 For more information about where you can drop off your waste equipment for recycling The object of declaration described above is in conformity with the requirements of the please contact your local city office your household waste disposal service or where specifications listed below following the provisions of the European R amp TTE directive you purchased the product 1999 5 EC EMC Directive 2004 108 EC and LVD Directive 2006 95 EC EN 300 328 V1 7 1 2006 EN301 489 1 V1 9 2 2012 EN301 489 17 V2 1 1 2009 EN60950 1 2006 A11 2009 A1 2010 A12 2011 EN55022 2010 AC 2011 EN55024 2010 EN61000 3 2 2006 A1 2009 A2 2009 EN61000 3 3 2008 Signed for and on behalf of Horizon Hobby LLC Robert Peak Champaign IL USA Chief Financial Office
3. direct sunlight Always use only Ni MH rechargeable batteries This charger cannot charge batteries H HM H H such as heavy duty alkaline mercury or lithium battery Always connect to the charger correctly Always disconnect the battery and charger after charging and let them cool between charges Always inspect the battery before charging Always terminate all processes and contact Horizon Hobby if the product malfunctions Always make sure you know the specifications of the battery to be charged or discharged to ensure it meets the requirements of this charger Always constantly monitor the temperature of the battery pack while charging Always end the charging process if the charger or battery becomes hot to the touch or starts to change form during the charge process Always charge in a well ventilated area CHARGING THE BATTERY Charge only batteries that are cool to the touch and are not damaged Inspect the battery to make sure it is not damaged e g swollen bent broken or punctured 1 a Aa W N Connect the charger to an AC power source noting proper polarity Connect the battery connector to the charger connector Let the battery charge for 3 hours Disconnect the battery from the charger Disconnect the charger from the AC power source A CAUTION If at any time during the charging process the battery becomes hot to the touch disconnect the battery immediately and discontinue
4. or serviced and is compliant in the country you live and use the Product in please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization RMA number Pack the Product securely using a shipping carton Please note that original boxes may be in cluded but are not designed to withstand the rigors of shipping without additional protection Ship via a carrier that provides tracking and insurance for lost or damaged parcels as Horizon is not responsible for merchandise until it arrives and is accepted at our facility An Online Service Request is available at http Awww horizonhobby com content _service center_render service center If you do not have internet access please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service When calling Horizon you will be asked to provide your complete name street address email address and phone number where you can be reached during business hours When sending product into Horizon please include your RMA number a list of the included items and a brief summary of the problem A copy of your original sales receipt must be included for war ranty consideration Be sure your name address and RMA number are clearly written on the outside of the shipping carton NOTICE Do not ship Li Po batteries to Horizon If you have any issue with a Li Po battery please cont
5. other than those covered in the troubleshooting or maintenance sections arise please call the appropriate Horizon product support department CLEANING Performance can be hindered if dirt gets in any of the moving suspension parts Use compressed air a soft paintbrush or a toothbrush to remove dust or dirt Avoid using solvents or chemicals as they can actually wash dirt into the bearings or moving parts as well as cause damage to the electronics Make sure the ESC and receiver are secure on the chassis Replace the double sided tape if necessary Power on the transmitter If the green LED is dim or off replace the AA batteries in your transmitter Check the spur gear for wear Hold the trigger in the full brake position while powering on the transmitter The LED flashes rapidly indicating the programming mode is active the full throttle end point Throttle End Point Continue holding full throttle Turn the TH TRIM knob to adjust Brake End Point Hold the trigger in the full brake position Turn the TH TRIM knob to adjust the full brake end point Return the trigger to the center position Left Steering End Point Hold the steering wheel in the full left position Turn the ST TRIM knob to adjust the left end point Right Steering End Point Hold the steering wheel in the full right position Turn the ST TRIM knob to adjust the right end point Return the steering wheel to the center position Power off the transmi
6. range and or glitching Transmitter batteries low Vehicle battery low Loose plugs or wires Check and replace Recharge battery Check all wire connections and plugs LOSI MINI 8IGHT T RTR INSTRUCTION MANUAL PROBLEM POSSIBLE CAUSE SOLUTION The front wheels oscillate The steering gain is set too high Turn down the steering gain The steering channel was reversed after calibration The front wheels turn the wrong way when the car slides rotates Rebind and calibrate The steering channel was reversed after calibration The throttle does not reduce when the car slides rotates Rebind and calibrate LIMITED WARRANTY What this Warranty Covers Horizon Hobby LLC Horizon warrants to the original purchaser that the product purchased the Product will be free from defects in materials and workmanship at the date of purchase What is Not Covered This warranty is not transferable and does not cover i cosmetic damage ii damage due to acts of God accident misuse abuse negligence commercial use or due to improper use installation operation or maintenance iii modification of or to any part of the Product iv attempted service by anyone other than a Horizon Hobby authorized service center v Product not purchased from an authorized Horizon dealer or vi Product not compliant with applicable technical regulations OTHER THAN THE EXPRESS WARRANTY ABOVE HORIZON MAKES
7. the charging process sa INSTALLING THE BATTERY AND POWERING ON THE VEHICLE ae ae ee E Remove the body clips and remove the body Remove the body clips from the battery strap posts and remove the battery strap Install the fully charged battery in vehicle Ensure the ESC is powered off Connect the battery to the ESC D ae jj 4 SSe lt lt EN aw E Reinstall the battery strap and body clips Center the ST TRIM and TH TRIM on the transmitter Power on the transmitter Power on the ESC The vehicle and receiver MUST remain motionless for at least 2 seconds Reinstall the body and body clips on the vehicle Ab x S i D A COD LA a Qt ae a aN Oe a OO 7 Y VS A ee OIF IZA Q Q LOSI MINI 8IGHT T RTR INSTRUCTION MANUAL SPEKTRUM DX2E RADIO SYSTEM Steering Wheel Controls direction left right of the model Throttle Trigger Controls speed and direction forward brake reverse of the model Antenna Transmits the signal to the model ON OFF Switch Turns the power ON OFF for the transmitter Indicator Lights Solid green light indicates adequate battery power Flashing green light indicates the battery voltage is critically low Replace batteries a oe YY SS 6 ST Trim Adjusts the total steering travel 7 TH Trim Adjusts the total throttle travel 8 ST Rate Adjusts the sensitivity of AVC 9 BIND Button Puts the transmitte
8. ESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Vehicle does not operate Battery not charged or plugged in ESC switch not On Transmitter not On or low battery Charge battery plug in Turn on ESC switch Turn on replace batteries Motor runs but rear wheels do not rotate Pinion not meshing with spur gear Pinion spinning on motor shaft Transmission gears stripped Drive pin broken Adjust pinion spur mesh Tighten pinion gear setscrew on motor shaft flat spot Replace transmission gears Check and replace drive pin Steering does not work Servo plug not in receiver properly Servo gears or motor damaged Make sure the steering servo plug is connected to the receiver steering channel noting proper polarity Replace or repair servo Will not turn one direction Servo gears damaged Replace or repair servo Motor does not run Motor wire solder joint is damaged Motor wire broken ESC damaged Resolder the motor wire with the proper equipment Repair or replace as needed Contact Horizon Hobby Product Support ESC gets hot Motor over geared Driveline bound up Use smaller pinion or larger spur gear Check wheels and transmission for binding Poor run time and or sluggish acceleration Battery pack not fully charged Charger not allowing full charge Driveline bound up Recharge battery Try another charger Check wheels transmission for binding Poor
9. KV PINION SPUR BATTERY GEARING COMMENTS 14T 62T Ni MH OK This is the stock gearing If you use a 2S 3S Li Po you will need to gear down or you will overheat the motor 12T 62T 2S Li Po OK This gearing is optimal for a 2S Li Po 11T 62T 3S Li Po OK This gearing is optimal for a 3S Li Po CHANGING THE PINION GEAR RATIO Your vehicle comes with the 14T pinion gear installed for the included 6C Ni MH battery If you want to use a 2S 3S Li Po battery refer to the Gearing Chart for the proper gearing 1 2 Loosen the motor screws and slide the motor back will overheat 3 Loosen the setscrew and remove the installed pinion gear 1 4 Place the new pinion on the end of the motor shaft so the remove the gear cover setscrew is located over the flat on the shaft 5 Position it so the teeth line up with the spur gear and secure by tightening the setscrew spur gears 6 Tighten the motor screws and reinstall the gear cover Remove the 6 screws securing the gear cover and remove the gear cover 5 Remove the paper Check the mesh at 3 5 different locations around the spur gear for a small amount of movement 6 Reinstall the gear cover LOSI MINI 8IGHT T RTR INSTRUCTION MANUAL SETTING THE GEAR MESH The gear mesh has already been set at the factory Setting it is only necessary when changing motors or gears Proper gear mesh how gear teeth meet is important to the performance of the vehicle When the
10. RIR READY TO RUN 1 14 SCALE BRUSHLESS TRUGGY oe Iy SS save INSTRUCTION MANUAL 7 BEDIENUNGSANLEITUNG Before operating this vehicle please read all printed materials thoroughly Horizon Hobby isnot responsible for inadvertent errors in this manual MANUEL D UTILISATION MANUALE DI ISTRUZIONI NOTICE All instructions warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby LLC For up to date product literature visit horizonhobby com and click on the support tab for this product MEANING OF SPECIAL LANGUAGE The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product NOTICE Procedures which if not properly followed create a possibility of physical property damage AND a little or no possibility of injury CAUTION Procedures which if not properly followed create the probability of physical property damage AND a possibility of serious injury WARNING Procedures which if not properly followed create the probability of property damage collateral damage and serious injury OR create a high probability of superficial injury A WARNING Read the ENTIRE instruction manual to become familiar with the features of the product before operating Failure to operate the product correctly can result in damage to the product p
11. TERPROOF ELECTRONICS Your new Horizon Hobby vehicle has been designed and built with a combination of waterproof and water resistant components to allow you to operate the product in many wet conditions including puddles creeks wet grass snow and even rain While the entire vehicle is highly water resistant it is not completely waterproof and your vehicle should NOT be treated like a submarine The various electronic components used in the vehicle such as the Electronic Speed Control ESC servo s and receiver are waterproof how ever most of the mechanical components are water resistant and should not be submerged Metal parts including the bearings hinge pins screws and nuts as well as the contacts in the electrical cables will be susceptible to corrosion if additional maintenance is not performed after running in wet conditions To maximize the long term performance of your vehicle and to keep the warranty intact the procedures described in the Wet Conditions Maintenance section below must be performed regularly if you choose to run in wet conditions If you are not willing to perform the additional care and maintenance required then you should not operate the vehicle in those conditions A CAUTION Failure to exercise caution while using this product and complying with the following precautions could result in product malfunction and or void the warranty GENERAL PRECAUTIONS e Read through the wet conditions ma
12. act the appropriate Horizon Product Support office Warranty Requirements For Warranty consideration you must include your original sales receipt verifying the proof of purchase date Provided warranty conditions have been met your Product will be serviced or replaced free of charge Service or replacement decisions are at the sole discretion of Horizon Non Warranty Service Should your service not be covered by warranty service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50 of the retail purchase cost By submitting the item for service you are agreeing to payment of the service without notifica tion Service estimates are available upon request You must include this request with your item submitted for service Non warranty service estimates will be billed a minimum of 1 2 hour of labor In addition you will be billed for return freight Horizon accepts money orders and ca shier s checks as well as Visa MasterCard American Express and Discover cards By submit ting any item to Horizon for service you are agreeing to Horizon s Terms and Conditions found on our website http Awww horizonhobby com content _service center_render service center ATTENTION Horizon service is limited to Product compliant in the country of use and ownership If received a non compliant Product will not be serviced Further the sender will be responsible for arranging retur
13. ake reverse and hold until a beep sounds and the green LED glows solid c Release the throttle trigger to neutral Both red and green LEDs will flash 3 times with 3 beeps d Power OFF the ESC and then power ON the ESC to return to normal operation OPERATION LED STATUS LED STATUS Waiting for Throttle Position Position Set Neutral Flashing Green Solid Green 1 second Forward Flashing Red Solid Red 1 second Full Brake Reverse Solid Red Solid Green 1 second Flashing Green Followed by Red and Green Flashing 3x C Change ESC Running Mode Forward Reverse with Smart Brake or Forward Only with Brake The green LED will indicate the currently selected ESC running mode for 4 seconds Green LED Solid Forward Reverse Smart Brake Green LED Flashing Forward Only Brake a Move the throttle trigger to full throttle within the 4 seconds to select the next ESC mode A beep will sound and the green LED will indicate the new ESC running mode b To change back to the previous mode repeat the step above within 4 seconds of the beep c Both red and green LEDs will flash 3 times with 3 beeps d Power OFF the ESC and then power ON the ESC to return to normal operation At any time that the ESC is powered and the transmitter is at neutral the green LED will indicate the current ESC running mode Green LED Solid Forward Reverse Smart Brake Green LED Flashing Forward Only Brake FUZE MINI BRUSHLESS MOTOR 4500
14. cccssscsecsesssecsecsssecsecssessecseessessesassesaesaseesaesatees 6 AVC Active Vehicle Control Binding and Calibrating the Receiver Bo ie D ATEETAN 6 TORE Running Your V CUNNC Saag sanaa eE EE EEEE 6 Driving Precautions cccceccceeesseeeeeseeeeeseesneaneaseeeeensaeeeeeeseeneaeseeeeneaseaseaseaseeteeseaneateetaees 6 Ug I e A EAE 6 Fuze Mini Brushless Waterproof ESC DYN4840WP ccccccscsssecsecsesecsecsssesseeseeeseeseeass 7 Fuze Mini Brushless Motor 450 OKV wooo eeeeceesecceesecesseceenseecereeeeeesenseeeenresentresentesents 7 Tuning Adjusting amp Maintaining your Vehicl cccccecccscssscsscssssssscsseessessseessesseeaees 8 Changing the Travel Adjust Settings s cscesseccssossssascocsosassacessassuscscsssasssssssassuscsssaeansacsdensns 8 Soe eT 8 Disabling The Stability ASSIST FUNCTION sessao 8 Foubleshooung GUNG sirier aAA 8 Limited Wamani sven ontaueidatbiauenesanaaeanaceanacenneuennsenensiniediinadin 9 PECI N O e E EEEE 10 A a E a E E cee TAEAE cece ceetce cee ance aneeeseeasnemennaseneseenantees 10 Compliance Information for the European UnIOn s sssssssssssnsnsisisisinensrsisirisinrrsrnrnrnnns 10 PE Bik i j le aaerpeeerenr ce eenrrsrrrerenr srt errnr str mt rrerrenrrreser ret r renter tttrrer ret rr rrserrrtr reer errr tre 38 Optional Parts c ccccccccccsscsscsscsscsscsecsecsecsessecsecsecsecsecsecsecsecsessessecaessecsessessessessesseeaees 39 Exploded View s ssssssssssssisisnsnasisinrenarisinrurirsrariinra
15. dealer to ensure authentic high quality Spektrum product Horizon Hobby LLC disclaims all support and warranty with regards but not limited to compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum e Always keep all chemicals small parts and anything electrical out of the reach of children e Always avoid water exposure to all equipment not specifically designed and protected for this purpose Moisture causes damage to electronics e Never place any portion of the model in your mouth as it could cause serious injury or even death e Never operate your model with low transmitter batteries TABLE OF CONTENTS Register your Losi Product ONIine csecsssesscessscssssesecsssecesesesseeesacersacersasersesaesesaeees 2 6141810 015 aeeemenennneemnesmer erent neers E 2 Recommended Accessories Tools Included E E E 3 Water Resistant Vehicle with Waterproof El ctroniCs cccccccsccsesecsetecsesecsseceseeesseeees 3 RS ee sess ecco secs casen eccageconcessceseascreseet6fevcsscecussuseusecspscensasonassaupsegunpsoncnsaicerssesmuces 3 EEEE EALE EEEE E 4 SEET Te BOIL E a E E A A EEANN 4 Installing the Battery and Powering ON the Vehicle cccccccscesecetsesecsstessesseeeeteeeeess 4 Specktrum DX2E Radio SYSTE sansccaccsicdevsenstadunansaceusnssdadensddascnntidanennencademnannsicaudecniinnttans 5 Installing the Transmitter Batteries SRS4200 Stability Assist RECCIVEl c ccc
16. ersonal property and cause serious injury This is a sophisticated hobby product It must be operated with caution and common sense and requires some basic mechanical ability Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property This product is not intended for use by children without direct adult supervi sion Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby LLC This manual contains instructions for Age Recommendation Not for children under 14 years This is not a toy SAFETY PRECAUTIONS AND WARNINGS e Always keep a safe distance in all directions around your model to avoid collisions or injury This model is controlled by a radio signal subject to interference from many sources outside your control Interference can cause momentary loss of control e Always operate your model in open spaces away from full size vehicles traffic and people e Always carefully follow the directions and warnings for this and any optional support equipment chargers rechargeable battery packs etc safety operation and maintenance It is essential to read and follow all the instructions and warnings in the manual prior to assembly setup or use in order to operate correctly and avoid damage or serious injury A WARNING AGAINST COUNTERFEIT PRODUCTS Always purchase from a Horizon Hobby authorized
17. ference and 2 this device must accept any interference received including interference that may cause undesired operation A CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2 400 GHz to 2 4835 GHz frequency range ANTENNA SEPARATION DISTANCE When operating your Spektrum transmitter please be sure to maintain a separation distance of at least 5 cm between your body excluding fingers hands wrists ankles and feet and IC INFORMATION the antenna to meet RF exposure safety requirements as determined by FCC regulations This device complies with Industry Canada licence exempt RSS standard s Operation is The following illustrations show the approximate 5 cm RF exposure area and typical subject to the following two conditions 1 this device may not cause interference and 2 hand placement when operating your Spektrum transmitter this device must accept any interference including interference that may cause undesired operation of the device COMPLIANCE INFORMATION FOR THE EUROPEAN UNION E T LT ku ev r ne PL PT RO SE s Sk UK isjujnojej DECLARATION OF CONFORMITY Ef INSTRUCTIONS FOR DISPOSAL OF WEEE in
18. gear mesh is too loose the spur gear could be damaged by the pinion gear of the motor If the mesh is too tight speed could be limited and the motor and ESC Remove the 6 screws securing the gear cover and 2 Loosen the motor screws and slide the motor back 3 Puta small piece of paper between the pinion and 4 Push the gears together while tightening the motor screws TUNING ADJUSTING amp MAINTAINING YOUR VEHICLE CHANGING THE TRAVEL ADJUST SETTINGS 1 6 Examine your vehicle on a regular basis Use a brush to remove dirt and dust Look for damage to the suspension arms and other molded parts Re glue the tires to the wheels if necessary Use suitable tools to tighten fasteners Make sure the camber and steering linkages are not bent Replace any bent linkages Adjust the Toe and Camber settings if necessary Remove the shocks and inspect them for damage Rebuild the shocks if oil is leaking Inspect electronics and batteries for exposed wires Repair exposed wires with shrink wrap or replace the wire SERVICE REPAIR RADIO SPEED CONTROL amp MOTOR If any problems other than those covered in the troubleshooting section arise please call the appropriate electronics service department They will be able to give the problem additional specific attention and provide instructions for the solution MAINTENANCE If any questions
19. intenance procedures and make sure that you have all the tools you will need to properly maintain your vehicle e Not all batteries can be used in wet conditions Consult the battery manufacturer before use Caution should be taken when using Li Po batteries in wet conditions e Most transmitters are not water resistant Consult your transmitters manual or the manufacturer before operation e Never operate your transmitter or vehicle where lightning may be present e Do not operate your vehicle where it could come in contact with salt water ocean water or water on salt covered roads contaminated or polluted water Salt water is very conductive and highly corrosive so use caution e Even minimal water contact can reduce the life of your motor if it has not been certified as water resistant or waterproof If the motor becomes excessively wet apply very light throttle until the water is mostly removed from the motor Running a wet motor at high speeds may rapidly damage the motor QUICK START Driving in wet conditions can reduce the life of the motor The additional resistance of operating in water causes excess strain Alter the gear ratio by using a smaller pinion or larger spur gear This will increase torque and motor life when running in mud deeper puddles or any wet conditions that will increase the load on the motor for an extended period of time WET CONDITIONS MAINTENANCE Drain any water that has collected in the tires by
20. k in the differentials While holding the chassis with only the left side tires firmly on the ground give the car about 1 8 throttle for 30 seconds The right side tires should spin freely during this time Repeat this with only the right side tires firmly on the ground allowing the left side tires to spin freely Repeat this 2 3 times 2 Check for free suspension movement All suspension arms and steering components should move freely Any binds will cause the car to handle poorly 3 Charge the battery 4 Check the calibration of the ESC If recalibration is required refer to the Fuze Mini Brushless ESC section 5 Adjust the transmitter settings to your desired configuration DRIVING PRECAUTIONS e Maintain sight of the vehicle at all times e Inspect the vehicle for loose wheel hardware e Inspect the steering assembly for any loose hardware Driving the vehicle off road can cause fasteners to loosen over time e Do not drive the vehicle in tall grass Doing so can damage the vehicle or electronics e Stop driving the vehicle when you notice a lack of power Driving the vehicle when the battery is discharged can cause the receiver to power off You may lose control of the vehicle e Do not apply the throttle in forward or reverse if the vehicle is stuck Applying throttle in this instance can damage the motor or ESC e After driving the vehicle allow the electronics to cool to ambient temperature before using the next batte
21. ming maintenance 1 Read the safety precautions found in this manual 2 Charge the battery Refer to the included charging warnings and instructions for battery charging information 3 Install the AA batteries in the transmitter Only use alkaline or rechargeable batteries 4 Install a fully charged battery in the vehicle LOSI MINI 8IGHT T RTR INSTRUCTION MANUAL Power ON the transmitter and then the vehicle Always power the transmitter ON before the vehicle and power it OFF after the vehicle has been powered OFF Check the steering and throttle control directions Verify that the servos are moving in the correct direction Drive your vehicle Perform any necessary maintenance CHARGING WARNINGS ANODE Failure to exercise caution while using this product and comply with the following warnings could result in product malfunction electrical issues excessive heat FIRE and ultimately injury and property damage Read all safety precautions and literature prior to use of this product Never leave the battery and charger unattended during use Never allow children under 14 years of age to charge battery packs Never attempt to charge dead or damaged batteries Never charge a battery if the cable has been pinched or shorted Never allow batteries or charger to come into contact with moisture at any time Never charge batteries in extremely hot or cold places recommended between 50 80 F 10 26 C or place in
22. n shipment of the un serviced Product through a carrier of the sender s choice and at the sender s expense Horizon will hold non compliant Product for a period of 60 days from notifica tion after which it will be discarded WARRANTY AND SERVICE CONTACT INFORMATION COUNTRY OF PURCHASE HORIZON HOBBY CONTACT INFORMATION ADDRESS United States of America Horizon Service Center servicecenter horizonhobby com RequestForm 4105 Fieldstone Rd Repairs and Repair Requests Champaign Illinois 61822 USA Horizon Product Support www quickbase com db bghj7ey8c a GenNewRecord Product Technical Assistance 888 959 2305 Sales sales horizonhobby com 888 959 2305 United Kingdom Service Parts Sales sales horizonhobby co uk Units 1 4 Ployters Rd Horizon Hobby Limited 44 0 1279 641 097 Staple Tye Harlow Essex CM18 7NS United Kingdom Germany Horizon Technischer Service service horizonhobby de Christian Junge StraBe 1 Sales Horizon Hobby GmbH 49 0 4121 2655 100 25337 Elmshorn Germany France Service Parts Sales infotrance horizonhobby com 11 Rue Georges Charpak Horizon Hobby SAS 33 0 1 60 18 34 90 77127 Lieusaint France China Service Parts Sales info horizonhobby com cn Room 506 No 97 Changshou Rd Horizon Hobby China 86 021 5180 9868 Shanghai China 200060 FCC INFORMATION This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful inter
23. ns below Insert the Bind Plug in the BIND port on the receiver Connect a fully charged battery pack to the ESC Power on the ESC The orange LED flashes indicating the receiver is in bind mode Center the ST TRIM and TH TRIM dials on the transmitter Press and hold the BIND button while powering on the transmitter GT oe eo oa Release the BIND button when the orange LED slowly flashes The transmitter and receiver are linked when the orange LED is solid 7 Pull the transmitter trigger to Full Throttle 8 Push the transmitter trigger to Full Brake then return the trigger to center 9 Turn the transmitter steering wheel to Full Right 10 Turn the transmitter steering wheel to Full Left then return the steering wheel to center The orange LED flashes once 11 Remove the Bind Plug then power off the receiver to save the settings 12 Power off the transmitter N BRAKE REVERSE CONTROL TEST Perform a control test with the vehicle wheels off the ground If the wheels rotate after the vehicle is powered ON adjust the TH Trim knob until they stop To make the wheels move forward pull the trigger To reverse them wait for the wheels to stop then push the trigger When moving forward the wheels should maintain a straight line without any steering wheel input If not adjust the ST Trim knob so the wheels maintain a straight line without having to turn the steering wheel BEFORE RUNNING YOUR VEHICLE 1 Brea
24. r February 28 2014 Horizon Hobby LLC LOSI MINI 8IGHT T RTR INSTRUCTION MANUAL
25. r into Bind Mode 10 ST REV Reverses the function of the steering when the wheel is turned left or right 11 TH REV Reverses the function of the speed control when pulled back or pushed forward SRS4200 AVC TECHNOLOGY RECEIVER 12 BIND 13 DISABLE 14 AUX 2 15 AUX 1 16 THR 17 STR BIND BATT DISABLE lilli aa SPEKTRUM wx SR94200 AUX1 4CH SURFACE RECEIVER THR sr AVC TX 1 Push in the battery cover a small amount to release the retaining tab then remove the cover 2 Install 4 AA batteries taking care to align the battery polarity to the diagram in the transmitter s battery case 3 Carefully reinstall the battery cover by aligning the tabs with the slots on the transmitter A CAUTION Do not remove the transmitter batteries while the model is powered on or while operating as a loss of model control damage or injury can result For more information on the transmitter go to www horizonhobby com and click on the support tab for the Spektrum DX2E to download the instruction manual LOSI MINI 8IGHT T RTR INSTRUCTION MANUAL SRS4200 STABILITY ASSIST RECEIVER AVC ACTIVE VEHICLE CONTROL The Spektrum SRS4200 receiver features Active Vehicle Control AVC technology that responds similar to traction control in full scale vehicles In addition to traction control AVC technology also increases steering stability during high speed driving or while driving over rough terrain As you increase the AVC
26. rariinranarirnranakirnranatnnrsrannnerernnanene 40 Ee E A A 44 REGISTER YOUR LOSI PRODUCT ONLINE Register your vehicle now and be the first to find out about the latest option parts product updates and more Click on the Support tab at WWW LOSI COM and follow the product registration link to stay connected COMPONENTS e 1 14 Scale Mini 8IGHT T RTR vehicle e Spektrum DX2E 2 4GHz DSMR Radio System e SRS4200 4 Channel DSMR Receiver with Active Vehicle Control AVC technology e Dynamite Fuze Mini Brushless Waterproof ESC e Dynamite Fuze Mini Brushless Motor 4500Kv e Vaterra 903WP Digital Servo e Dynamite 7 2V 1200mAh Ni MH Battery Long with EC3 Connector e Losi AC Wall Charger with EC3 Connector 110V e 4 AA batteries for transmitter RECOMMENDED ACCESSORIES e Soft bristle brush for cleaning e 0 or 1 Phillips screwdriver e 2 0mm Hex L wrench e Thread Lock TOOLS INCLUDED e Turnbuckle Wrench e 4 Way Wrench e 1 5mm Hex L Wrench e Slipper Adjustment Tool Use only Dynamite tools or other high quality tools Use of inexpensive tools can cause damage to the small screws and parts used on this type of model LOSI MINI 8IGHT T RTR INSTRUCTION MANUAL CONTENTS Q N ILA Tao F EE na Ca re ss rade tC LEN a cence A ama A RELE SESE SS S Ly WATER RESISTANT VEHICLE WITH WA
27. ry pack RUN TIME The largest factor in run time is the capacity of the battery pack A larger mAh rating increases the amount of run time experienced The condition of a battery pack is also an important factor in both run time and speed The battery connectors may become hot during driving Batteries will lose performance and capacity over time Driving the vehicle from a stop to full speed repeatedly will damage the batteries and electronics over time Sudden acceleration will also lead to shorter run times TO IMPROVE RUN TIMES e Keep your vehicle clean and well maintained e Allow more airflow to the ESC and motor e Change the gearing to a lower ratio A lower ratio lowers the operating temperature of the electronics Use a smaller pinion gear or larger spur gear to lower the gear ratio e Use a battery pack with a higher mAh rating LOSI MINI 8IGHT T RTR INSTRUCTION MANUAL FUZE MINI BRUSHLESS WATERPROOF ESC DYN4840WP ESC PROGRAMMING PROCEDURE 1 and the throttle trim to the center position 2 Hold the throttle trigger at full throttle then power ON the ESC 3 Continue holding the throttle trigger at full throttle until a beep sounds and both red and green LEDs flash then release the throttle to neutral The ESC is now in programming mode The ESC will cycle through its programmable features in this order A Green LED only Change Battery Chemistry Type Ni MH or Li Po B Red LED only Transmit
28. sensitivity the system increases steering stability and traction control similar to reducing the amount of steering rate in a computer transmitter Reducing the sensitivity value increases the amount of steering control from the transmitter The SRS4200 receiver also enables you to quickly turn AVC on or off if you participate in organized racing IMPORTANT You must use digital servos with the SRS4200 receiver Using analog servos will reduce the performance of the system and may cause analog servos to overheat AVC SENSITIVITY The ST RATE dial adjusts the sensitivity or stability value in the receiver If you increase the sensitivity the AVC system becomes more sensitive to the vehicle drifting left or right You would use maximum sensitivity during high speed driving or drag racing when you want the vehicle to stay in a straight line As the sensitivity value increases the amount of steering travel decreases Turn the ST RATE knob counter clockwise to reduce the sensitivity Turn the ST RATE knob clockwise to increase the sensitivity IMPORTANT The ST RATE knob will only adjust the sensitivity when the transmitter is bound to a DSMR receiver When the transmitter is bound to a DSM DSM2 or DSM Marine receiver the ST RATE knob controls the steering dual rate BINDING AND CALIBRATING THE RECEIVER Your Spektrum DX2E comes prebound to the vehicle however if you need to rebind or calibrate the receiver follow the instructio
29. spinning them at high speed With the body removed place the vehicle upside down and pull full throttle for a few short bursts until the water has been removed A CAUTION Always keep hands fingers tools and any loose or hanging objects away from rotating parts when performing the above drying technique Remove the battery pack s and dry the contacts If you have an air compressor or a can of compressed air blow out any water that may be inside the recessed connector housing Remove the tires wheels from the vehicle and gently rinse the mud and dirt off with a garden hose Avoid rinsing the bearings and transmission NOTICE Never use a pressure washer to clean your vehicle Use an air compressor or a can of compressed air to dry the vehicle and help remove any water that may have gotten into small crevices or corners Spray the bearings drive train fasteners and other metal parts with a water displacing light oil Do not spray the motor Let the vehicle air dry before you store it Water and oil may continue to drip for a few hours Increase the frequency of disassembly inspection and lubrication of the following Front and rear axle hub assembly bearings All transmission cases gears and differentials Motor clean with an aerosol motor cleaner and re oil the bushings with lightweight motor oil Please read the entire manual to gain a full understanding of the Mini 8IGHT T RTR vehicle fine tuning the setup and perfor
30. ter ESC Endpoint Calibration C Red Green LED Change ESC Running Mode Forward Reverse Smart Brake or Forward Only Brake Move the throttle trigger to full throttle and back to neutral at A B or C in order to execute the setting task A Change Battery Chemistry Type Ni MH or Li Po The respective LED will indicate the current battery type for 4 seconds Solid Green LED Ni MH Solid Red LED Li Po a Move the throttle trigger to full throttle and return to neutral within the 4 seconds A beep will sound and the respective LED will indicate the updated battery type b To change back to the previous battery type repeat the step above within 4 seconds of the beep c Both red and green LEDs will flash 3 times with 3 beeps d Power OFF the ESC and then power ON the ESC to return to normal operation Power ON the transmitter and set the transmitter s throttle endpoint travel to maximum B Transmitter ESC Endpoint Calibration After executing the setting task the green LED will flash as you release the throttle trigger to neutral Once neutral is reached a beep will sound and the green LED will glow solid for 1 second The red LED will begin to flash a Move the throttle trigger to full throttle and hold it until a beep sounds and the red LED glows solid for 1 second Release the throttle trigger to neutral and the red LED will glow solid while the green LED will begin to flash b Move the throttle trigger to full br
31. tter to save the travel adjust settings The minimum travel is 75 and the maximum travel is 150 IMPORTANT If the travel is changed on the DX2E you must rebind and calibrate the SRS4200 DISABLING THE STABILITY ASSIST FUNCTION If you participate in organized racing you may be required to turn Stability Assist off To turn Stability Assist off Insert a Bind Plug in the BIND port on the receiver Insert a second Bing Plug in the DISABLE port on the receiver Connect a fully charged battery pack to the ESC Power on the ESC The orange LED flashes indicating the receiver is in bind mode Center the ST TRIM and TH TRIM dials on the transmitter Press and hold the BIND button while powering on the transmitter eS YS YS Release the BIND button when the orange LED slowly flashes The transmitter and receiver are linked when the orange LED is solid Pull the transmitter trigger to Full Throttle go Push the transmitter trigger to Full Brake then return the trigger to center 10 Turn the transmitter steering wheel to Full Right 11 Turn the transmitter steering wheel to Full Left then return the steering wheel to center The orange LED flashes once 12 Remove the Bind Plugs then power off the receiver to save the settings 13 Power off the transmitter IMPORTANT You must calibrate the receiver each time it is placed in bind mode To activate AVC see the steps in Calibrating the Receiver TROUBL
32. y modification or misuse no liability shall be assumed nor accepted for any resulting damage or injury By the act of use setup or assembly the user accepts all resulting liability If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product purchaser is advised to return the Product immediately in new and unused condition to the place of purchase Law These terms are governed by Illinois law without regard to conflict of law principals This warranty gives you specific legal rights and you may also have other rights which vary from state to state Horizon reserves the right to change or modify this warranty at any time without notice WARRANTY SERVICES Questions Assistance and Services Your local hobby store and or place of purchase cannot provide warranty support or service Once assembly setup or use of the Product has been started you must contact your local distributor or Horizon directly This will enable Horizon to better answer your questions and service you in the event that you may need any assistance For questions or assistance please visit our website at www horizonhobby com submit a Product Support Inquiry or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative LOSI MINI 8IGHT T RTR INSTRUCTION MANUAL Inspection or Services If this Product needs to be inspected
Download Pdf Manuals
Related Search