Havis C-DMM-118 car kit
Contents
1. Note The C DMM 118 is shipped assembled It will need to be partially un assembled prior to installation OEM Dash Carefully remove driver side lower dash panel It Prior to installation may not be necessary to be completely removed Carefully remove passenger side lower dash panel Detach center dash panel and pull out It may not be necessary to be completely removed passenger side only as far as needed to remove 7 mm socket the AM FM radio _ gt A Baas T E E Unscrew AM FM radio from dash Unplug and remove radio from dash Screws will be reused 7 mm socket C DMM 118 INST 11 12 PASSENGER A AIR BAG OFF a Attach side support brackets to dash with Insert main bracket frame into dash cavity previously removed OEM radio screws l l One each side 7 mm socket Make sure not to pinch wires Loosely attach frame to side support brackets with Attach main bracket frame to forward OEM support 10 32 x 1 2 machine screws provided with clamp provided Tighten 1 4 nuts Tighten screws after next step Phillips screwdriver 7 16 socket with extension Attach door frame assembly to main frame Plug wires into radio and mount radio to frame studs with four 4 8 32 nuts provided studs with four 4 8 32 nuts provided 11 32 socket 11 32 socket C DMM 118_INST_11 12 z veg il ra A e a o ly j hg iiid K J Attach Trim Bezel to frame with four 4 screws2. Havis Inc 75 Jacksonville Road PO Box 2099 Warminster PA 18974 HAVI S T 800 524 9900 F 215 957 0729 Productivity in motion www havis com INSTALL INSTRUCTIONS C DMM 118 2006 2013 CHEVY VAN SWING OUT DASH MONITOR MOUNT The Dash Monitor Mount bracket system requires two or three main parts that are Sold Separately See web site Monitor Configurator for more detailed bracket information http www havis com monitor_mounts htm e 1 Vehicle Specific dash mount bracket C DMM 118 e I Computer Specific Monitor adaptor bracket C MM 200 series e 1 Offset adaptor bracket C MM 301 The C MM 301 offset adaptor goes between the C DMM 118 and C MM 2XX It may not be required in some applications TOOLS REQUIRED e Ratchet Wrench e Socket Set e Open End Wrenches 7 16 1 2 e Phillips Screwdriver short HARDWARE QTY DESCRIPTION PART 4 8 32 x 1 4 Flat Head Machine Screw GSM33178 4 8 32 Keps nut GSM30027 4 10 32 x 1 2 Flat Head Machine Screw GSM33072 4 1 4 20 Hex Flange Serrated Nut GSM30023 1 Monitor Adapter Hardware Varies monitor specific ALWAYS e Read all instructions before installing any Havis Inc products e Use hardware provided with install kit i WAS C DMM 118 Assembly for Chevy Van C MM 301 Offset Adaptor C MM 201 O o i S 7 Q SME I f x 8s NN 5 xo _ Og gt gt x C DMM 118_INST_11 12 INSTALLATION
3. Note The gas spring may need to be temporarily provided removed from frame in order to install Trim Bezel properly 1 2 wrench and socket i Attach C MM 200 monitor adaptor bracket to Attach Monitor bracket sscembly to swing door the back of monitor Also attach C MM 301 with 1 4 nuts provided with the monitor adaptor adaptor if required brackets View of completed C DMM 118 installation View of completed C DMM 118 installation with with a C VS 1800 SAV console C MD 204 tilt a DS DA 211 docking station C VS 1800 SAV swivel and C KBM 102 keyboard mount console C MD 204 tilt swivel and C KBM 102 keyboard mount C DMM 118_INST_11 12
Download Pdf Manuals
Related Search