Philips BT100B
Contents
1. obstacle between this system and a Bluetooth device can reduce the operational range Keep away from any other electronic device that may cause interference Connect a device 1 Switch the slider to 2 On your Bluetooth device search for BT100 3 In the device list select PHILIPS BT 100 e Ifa message prompts for the permission for Bluetooth connection with PHILIPS BT100 confirm it e Ifa password is required enter 0000 and then confirm t gt BT100 beeps twice when the Bluetooth connection is established Bluetooth indicator The LED indicator on the top indicates the status of Bluetooth connection Indicator Bluetooth connection Flashing blue Connecting or waiting for connection Solid blue Connected EN 9 Disconnect a device On your device disable the Bluetooth connection with BT100 Or on BT100 press and hold when it is not during a call Note Before connecting another Bluetooth device disconnect the current device first Reconnect a device For a paired Bluetooth device on which the automatic reconnection is enabled this product reconnects with it once it is detected s For a paired Bluetooth device that does not support the automatic reconnection reconnect it with this product manually Play audio via Bluetooth Note e If there is an incoming call on the connected mobile phone music play pauses Buttons Functions a3 Press and2. Always there to help you Register your product and get support at www philips com support i Question Contact BT100 Philips User manual PHILIPS Contents 1 Important 2 Safety 2 Notice 3 2 Your portable speaker 5 Introduction 5 What s in the box 5 Overview of the speaker 6 3 Get started 7 Charge the built in battery 7 Select a source or turn off 8 4 Use Bluetooth devices 9 Connect a device 9 Play audio via Bluetooth 0 Make a call 1 5 Listen to an external device 2 6 Product information 3 Amplifier 3 Bluetooth 3 General information 3 7 Troubleshooting 4 General 4 About Bluetooth device 3 EN 1 1 Important Safety Important Safety Instructions z Heed all warnings G Follow all instructions Do not use this apparatus near water Do not block any ventilation openings Install in accordance with the Do not inst Only use at Refer all se he device is damaged device has has been d manufacturer s instructions tall near any heat sources such as radiators heat registers stoves or other devices including amplifiers that produce heat ttachments accessories specified by the manufacturer rvicing to qualified service personnel Servicing is required when has been damaged in any way such as power supply cord or plug liquid has been spilled or objects have fallen into the device the been exposed to rain or moisture does not operate norm
3. ally or ropped Devices shall not be exposed to dripping or splashing Do not place any sources of danger on the device e g liquid filled objects ighted candles Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type Warning Never remove the casing of this apparatus e Never lubricate e Never place this any part of this apparatus apparatus on other electrical equipment Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user s authority to operate the equipment C 0168 This product complies with the radio interference requirements of the European Community Hereby WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC You can find the Declaration of Conformity on www philips com support Disposal of your old product oH Your product is designed and manufactured with high quality materials and components which can be recycled and reused E When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old prod
4. et of a computer EN Wi Charging indicator Indicator Battery In Bluetooth mode Flashing blue Solid blue depending on the working status Flashing blue Solid blue depending on the working status Under charging Fully charged In AUX IN mode Flashing white Under charging Solid white Fully charged In OFF mode Flashing white Under charging OFF Fully charged Note In Bluetooth mode when the battery is empty BT100 turns off automatically And the Bluetooth indicator flashes white while recharging To return to Bluetooth mode turn BT100 off and select Bluetooth mode again Select a source or turn off Slide the OFF AUX switch to select a source or turn off BT100 s Listen to an external Bluetooth device through Bluetooth connection g AUX IN Listen to an external device through an audio input cable OFF Turn off BT100 4 Use Bluetooth devices With this speaker you can listen to audio from a player and make a call through Bluetooth ete e Make sure that no audio input cable is connected to the AUX socket e Philips does not guarantee the compatibility with all Bluetooth devices Before pairing a device with this system read its user manual for Bluetooth compatibility e The product can memorize a maximum of 8 paired devices e Make sure that Bluetooth function is enabled on your device and your device is set as visible to all other Bluetooth devices e Any
5. hold for 8 seconds to clear the Bluetooth pairing information 10 EN Make a call Button functions in Bluetooth mode Buttons Status Functions a3 Incoming call Press to answer an incoming call Press and hold for more than 3 seconds to reject an incoming call During a call Press to end the current call Press and hold for more than 3 seconds to transfer call between BT100 and the mobile phone EN 11 5 Listen to an external device You can also listen to an external audio device for example MP3 player through BT100 1 Connect an audio input cable with a 3 5 mm connector on both ends to the AUX socket on this product and the headphone socket on the external device Switch the slider to the AUX position WN Play audio on the external device refer to its user manual 6 Product information Note Product information is subject to change without prior notice Amplifier Rated Output Power 2W RMS Signal to Noise Ratio gt 70dB Aux in Link 300 mV RMS 10 kohm Bluetooth Bluetooth specification V3 0 EDR Supported Profiles HFPv1 5 AD2Pv1 2 Advanced features Echo and noise cancellations Range 10 m 33 feet line of sight General information DC power input USB 5V 500mA Built in Li Polymer battery 3 7V 500mAH Battery working time gt 8 hours Dimensions Main Unit L xW x H 63 x 63 x 82 mm Weight Main Un
6. ice closer to this product or remove any obstacle between them For some devices Bluetooth connection may be deactivated automatically as a power saving feature This does not indicate any malfunction of this product EN 15 PHILIPS r Specifications are subject to change without notice 2014 WOOX Innovations Limited All rights reserved Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used by WOOX Innovations Limited under license from Koninklijke Philips N V ae BT100_00_UM_V2 0 a
7. it 0 18 kg EN 13 7 Troubleshooting Warning e Never remove the casing of this device To keep the warranty valid never try to repair the system yourself If you encounter problems when using this device check the following points before requesting service If the problem remains unsolved go to the Philips Web page www philips com support When you contact Philips make sure that the device is nearby and the model number and serial number are available General No power G Recharge your speaker No sound Adjust volume on the connected device When you listen to audio through Bluetooth make sure that no audio input cable is connected to the AUX socket Make sure that your Bluetooth device is within the effective operational range No response from the speaker Restart the speaker 14 EN About Bluetooth device The audio quality is poor after connection with a Bluetooth enabled device The Bluetooth reception is poor Move the device closer to this product or remove any obstacle between them Cannot connect with the device The Bluetooth function of the device is not enabled Refer to the user manual of the device for how to enable the function This product is already connected with another Bluetooth enabled device Disconnect that device and then try again The paired device connects and disconnects constantly The Bluetooth reception is poor Move the dev
8. om welcome Introduction With this speaker you can listen to audio from an external device via Bluetooth connection listen to audio from an external device through the AUX socket and make phone calls What s in the box Check and identify the contents of your package Main unit USB cable Short user manual Safety sheet EN 5 Overview of the speaker PHILIPS Battery Bluetooth indicator Lights up flashes or turns off depending on the status of BT100 e For details see the following section Charging indicator and Bluetooth indicator Integrated microphone 9 Press to answer an incoming call e Press to end the current call e Press and hold for 3s to reject an incoming call e Press and hold for 3s to change call between BT100 and mobile phone e In Bluetooth mode press and hold for 8s to clear the pairing information O DC IN e Charge BT100 through the USB cable OFF 8 AUX Slide to select Bluetooth AUX IN mode Slide to power off the speaker qa amp AUX Connect to an external player ao EN 3 Get started Always follow the instructions in this chapter in sequence Charge the built in battery BT100 is powered by a built in rechargeable battery Note Before use fully charge the built in battery Connect the USB cable between the DC IN socket on the speaker and a USB sock
9. ucts with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health A Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health EN 3 Always bring your product to a professional to remove the built in battery Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by WOOX Innovations is under license Note The type plate is located on the bottom of the apparatus 2 Your portable speaker Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips c
Download Pdf Manuals
Related Search