Home

Sharp LC-80UQ10E 80" Full HD 3D compatibility Wi-Fi Grey LED TV

1. 623 1 Active area 2 Thinnest part except of terminal height NOTE e Dimensions do not include protrusions such as screws and some parts GB 88 Appendix LC 80UQ10E LC 80UQ10EN LC 80UQ10KN 35 1825 60 lt 223 1120 1 Active area 2 Thinnest part except of terminal height NOTE e Dimensions do not include protrusions such as screws and some parts GB 89 EU Energy Label for Televisions On 30 November 2010 the European Commission adopted the Commission Delegated Regulation EU No 1062 2010 with regard to energy labelling of televisions The Regulation entered into force on 20 December 2010 and applies in all Member States Manufacturers and dealers are required to display the label on their televisions from 30 November 2011 The label provides information to assist consumers in evaluating televisions for energy efficiency and energy consumption and to make a purchasing decision 2 oo SSHARP EU Energy Label TV EU framework directive the energy label It has applied to household appliances since 1992 and was expanded to cover energy consumption related products in June of 2010 The sub ordinance was promulgated on 30 November 2010 usage is voluntary as of 20 December 2010
2. Q SCART cable commercially available NOTE Regarding the external output Component cable commercially available You can record programmes viewed on the TV with an external recording device Audio cable commercially available by connecting the external output of the TV with an SCART cable commercially available If you change TV channels during recording from the external devices or turn off the power on the TV the recorded content may change or be interrupted The external output may not be performed depending on the status of use GB 28 Connecting external devices Connect an amplifier with external speakers as shown below Connecting an amplifier with digital analogue audio inputs 0 e AUDIO L R You can use the EXT 2 terminal when connecting to a game console camcorder a DVD player recorder or other device DIGITAL AUDIO OUTPUT Stereo conversion cable for analogue audio commercially available Optical audio cable for digital audio commercially available This terminal is also used for headphones Reduce the volume before using headphones Overwhelming sound may damage your hearing NOTE e f the image is not in sync with the audio check the settings of the connected surround system Q AV cable commercially available GB 29 AQUOS LINK Controlli
3. E 144 gt gt 1 Press gt to start playback of a title e See the section Top menu title list if you want to start playback using the list of the titles in the AQUOS BD player AQUOS recorder 2 Press gt to fast forward Press lt q to reverse Press REC to start recording Press REC STOP to stop recording Press to stop Press IJ to pause Press 1 to turn the HDMI connected device on off NOTE e Refer to Regarding Select recording device Page 30 when the buttons for AQUOS LINK devices do not work LINK iu You can select the AQUOS LINK menu from the Link operation menu to arrange the settings for sound or an external device You can call up the CEC compatible recorder s EPG and preset timer recordings using the TV s remote control unit 1 Press A V to select Recorder power on off and then press OK e he external input source switches and the recorder s EPG is displayed 2 Select the programme to record e Refer to the operation manual of the recorder for details AQUOS LINK This section explains how to play back a title in the You can call up the CEC compatible recorder s EPG If multiple HDMI devices are connected in a daisy AQUOS BD player AQUOS recorder and preset timer recordings using the TV s remote chain you can specify which device to control here 1 Press to select menu title list and control Press A to select
4. 1 Carefully insert the module in the slot with the contact side forward 2 Thelogo on the CI module must be facing outward from the rear of the TV Checking module information Go to TV Menu gt gt Option gt setting gt CI menu e his menu is only available for digital stations e he content of this menu depends on the provider of the CI module Module General information on CI module displays Menu Adjustment parameters of each CA card displays Enquiry You can input numerical values such as passwords here NOTE e t takes a few minutes to certify the licence key when you insert CA card into the Cl compatible Cl module for the first time This process may fail when there is no antenna input or you have never run Auto installation e The Cl compatible Cl module sometimes upgrades its firmware You may not receive any TV images before upgrading You can only use the power button during upgrading Copy protected content may not be output or may be output with a copy control signal The protect icon is displayed when P INFO is pressed while watching copy protected contents Protect icon 56 If the TV displays an update confirmation message for the CA card while receiving Cl compatible broadcasts follow the screen prompts e Make sure that the Cl module is properly inserted If the old CAM is used authentication may fail In such case
5. gt BEO ue KA amm Audio STANDARD Adaptive volume Off Treble dS e 15 Bass 1 15 on 15 Balance 0 130 R30 e Adaptive volume Adjust volume level automatically to lessen sudden volume change On Adjust the volume gaps Off Does not adjust the volume gaps e Audio adjustment You can adjust the sound quality to your preference with the following settings Mem Cursor gt Cursor For weaker treble For stronger treble Bass 7 Forweakerbass Forstronger bass Decrease audio from the left speaker Decrease audio from the right speaker This function produces a surround effect from the speakers Balance Reproduces a life like experience for events such as live sports or concert performances that take place in a stadium like setting Reproduces a concert hall experience with realistic live Surround sound based on reverberant sounds measured in a concert hall Reproduces a movie theatre experience with realistic live surround sound based on reverberant sounds measured in a movie theatre 3D Creates three dimensional surround sound Standard with detailed control of the signal phase Normal Provides limited surround sound Outputs normal sound GB 38 Harmonics enhancer extended This function improves the sound quality by extending the selected range All Range The low range will be exten
6. ssssu 45 Optional features 45 Additional Sur 48 Miracast MIEFOFIPIO aososuedcsn uec satus 50 Other useful features 51 USB recording e 91 How to operate USB recording 52 SD USB media Home network 55 Selecting the picture size for photo mode 56 USB device compatibility 58 Home network server compatibility 58 Selecting the picture size for video mode 58 C nnecting a a A M 59 Connecting a POC rr 59 Displaying a PC image on the TV 59 62 Network setup 0 64 Connecting to the network esses 64 pe T 66 WAVE IS INGE MOT T 66 66 Operations in Net TV Mm 6 Enjoying 3D image viewing 67 Before using the 3D glasses 67 Preparing for the 3D glasses 68 Using the 3D 88568 5 4
7. E ue Mw L DIE T 1 UNDERSOAN AUTO USB me Home 22 Video ORIGINAL AV USB Video Home network Video FULL AV USB Video Home network Video E ESI er as al 2 MUTE M UE ud MUTE M U T E 2 MUTEOF Be a A C SU 0 _ SURROUND TOGGLE A C S U 1 SURROUNDON A C S U 2 SURROUNDOFF A C SU 4 SURROUND 3D HALL QUU UE BE mni MOVIE Qu URBE STANDARD 51 0 SURROUND 3D STADIUM A rocGE women steerer 1 HOUR PEPE 1 HOUR 30 MIN MM 2 HOUR 2 30 wx ieo aerea ore C DIRECT PAGE JUMP 100 899 3D 2953 T b C H 2 T D C H 8 TOPANDBOTTOM T D C H 4 3220 GIDE BY SIDE T D C H 5 fan 2 TOP AND BOTTOM r p e u e sDavO T b ciH z sD52D DEVICE T V NI M 1 DISPLAY THE DEVICE NAME SOFTWARE SWIVINIT DISPLAY THE VERSION SOFTWARE VERSION IP PROTOCOL Y 1 DISPLAY THE IP VERSION PROTOCOL VERSION Network setup Connecting to the network To enjoy internet services you need to connect the TV to a router with a high speed connection to the internet You c
8. You can select OSD language from among 26 languages Refer to the OSD language column in the specification table for the selectable languages Page 83 Go to TV Menu gt Setup gt View setting gt Language 6B 44 Useful viewing functions Optional features settings Go to TV Menu gt Setup gt Option m ISIN gt BEO 4 7 X iy Wy Option Option for view 3D setup Terminal setting Colour system Widemode 00 7 You can select the picture size Selectable picture size varies with the type of signal received 1 Goto TV Menu gt Setup gt Option gt Option for view gt Wide mode You can also select an item by pressing 9 on the remote control unit e The menu lists the Wide mode options selectable for the type of video signal currently received Press A to select the desired item As you toggle the options each is immediately reflected on the screen There is no need to press OK Item for SD Standard Definition signals Keeps the original aspect ratio in a full screen display For 14 9 letterbox pictures A thin side bar appears on each side and you may also see bars on the top and bottom with some programmes In this mode the picture is stretched p toward each side of the screen The anorama i ai p
9. LJ GS MENU C EPG Auto Power When MHL compatible device is connected to the TV the TV turns on automatically e his function operates when AQUOS LINK Control is set to See page 32 O Auto Input Selection When MHL compatible device is connected while the TV is on the input mode is selected automatically e his function operates when AQUOS LINK Control is set to See page 32 Operation Using the Remote Control The remote control of the TV can be used to operate a portable device 4 OK END 0 9 etc e he operations vary depending on the connected equipment and content being viewed Emm CJ ED C2 c cc R G Y B ccc AQUOS Basic adjustment Picture settings Go to TV Menu gt Setup gt Picture a Back 4 745 7 Picture Clear Picture Processing OPC off Backlight 3 16 awe 16 mfime AV mode gives you several viewing options to choose from to best match the system environment which can vary due to factors like room brightness type of programme watched or the type of image input from external equipment Press A V to select the desired mode and then press OK e You can also switch the mode on the Picture and Audio menu screen by pressing AV MODE The TV automatically
10. picture may appear similar to Full depending on broadcast signals Zoom 14 9 Ful For 16 9 squeeze pictures For 16 9 letterbox pictures Bars may appear on the top and bottom with some programmes For 14 9 letterbox pictures Bars may Cinema 14 9 appear on the top and bottom with some programmes Keeps the original resolution do not expand The items will be diplayed in ATV DTV SAT mode Item for HD High Definition signals Displays with an overscan image Crops all sides of screen Displays with an underscan image only when receiving a 720p signal Displays with the High Definition image adjusted optimally Noise may appear on the edge of the screen with some programmes Displays an image with the same Dot by Dot number of pixels on the screen when receiving 1080i 1080p signals only NOTE e Some items do not appear depending on the type of received signal e You may not be able to change the wide mode while in 3D mode e Refer to page 59 for PC signal inputs Cinema 16 9 GB 45 o Auto wide only DTV SAT mode The Auto wide allows the TV to switch automatically among the different picture size Go to TV Menu Setup Option Auto wide NOTE e Use Wide mode if an image does not switch to the appropriate picture size When the broadcast signal contains no aspect ratio information the function will not work even if enabled
11. 69 Cautions for 3D image viewing 71 Display format for 3D and 2D images 72 Viewing 3D images 2 75 Configuring the TV settings to enhance 3D image js 74 Specifications 3D glasses 76 Troubleshooting 3D Images 76 APOENA carinenta EEE 77 Troubleshooting PR 77 Updating your via DVB T T2 C S S2 79 Getting update 2 79 Information on the software licence for this PO 80 Deactivating Netflix function 80 Updating your TV USB network 80 X 81 Software licences for Net 82 Disclaimers for services using the Internet 82 SSC INCAMOMNS MEN TT 83 Specifications Wireless 84 Specifications Bluetooth 84 Environmental specifications 85 Mounting the TV onm a 85 Wall mount kit specifications 86 Dimensional 88 EU Energy Label for Televisions 90 NOTE e he
12. 9 Mini Low Backlight The screen dims Standard Standard colour gamut e This effect is greater on fast moving images Wore vivid colou With expahided e These functions will have no effect in the following cases Expanded ili 1 The type of signal received is a PC signal brightness Refer to page 75 for details COUT gamu 2 An OSD is being displayed boost NOTE 3 Teletext is activated i set to Off e This function is available only when selecting MOVIE i b oun pe bM case Brightness For less brightness For more brightness or MOVIE 30 from the AV mode menu Quattron Pro Drive is activated For less colour For more colour intensity intensity Tint Skin tones become Skin tones become purplish greenish Sharpness For less sharpness For more sharpness Colour GB 36 Basic adjustment Adjusts the images of fast moving video games to be clearer Standard Optimises picture quality for standard video games Produces a sharp picture from the original slow moving picture in a video game Selects the tone difference of the brightness and darkness of the image according to the type of programme watched from a maximum of 2 a minimum of 2 Automatically detects a film based source originally encoded at 24 or 25 frames per second depending on the vertical frequency analyses it and then recreates each still film frame fo
13. Soft cushion Insert and tighten the M5 screws length 14 mm into the holes on the rear of the TV M5 screws 6B 5 5 Attaching the stand cover 1 Insert the stand cover 2 Insert and tighten the M4 screw length 8 mm into the holes of the stand cover e Tighten the screw by pressing the bottom of the stand base to the TV side M4 screw NOTE e To detach the stand unit perform the steps in reverse order screwdriver is not supplied with this product e n the installation procedure be careful not to catch your fingers between the TV set and the floor Preparation Using the remote control unit Before using the TV for the first time insert the two supplied AAA size Use the remote control unit by pointing it towards the remote control sensor batteries When the batteries become depleted and the remote control unit fails Objects between the remote control unit and sensor may prevent proper to operate replace the batteries with new AAA size batteries operation 1 Open the battery cover 2 Insert the two supplied AAA size batteries e Place batteries with their terminals corresponding to the and indications in the battery compartment 3 Close the battery cover Remote control sensor CAUTION Improper use of batteries can result in chemical leakage or explosion Be sure to follow the instructions below Do not
14. Display USB media menu B button e USB device removal e Wide mode Reveal hide the guide display am Change the size of photo NOTE e Rotating photos only applies to the temporarily selected item and this setting is not saved Selecting the BGM Setup the slide show BGM from USB media menu by pressing B when selecting photo thumbnails This function is available only for the USB media mode Demo a Sample SONG 02 mp3 3 15 SONG 03 mp3 3 02 NUTS SONG 04 mp3 6 05 SONG_05 mp3 4 52 0 14 3 05 SONG 06 mp3 6 35 SONG 07 mp3 2 10 Buttons for slide show BGM select operation Buttons Description OK o When selecting a music file Play music 7 4 Select a desired item Cursor Select deselect items mark appears on the selected items All Stop music Folder Move to the thumbnail selection screen Play pause music Display USB media menu e Set all BGM B button e Reset all BGM e USB device removal e Wide mode The mode selected in Folder display setting NOTE e Slide show BGM will be reset in the cases below e Select Reset all BGM by pressing B during selecting music files e 30 back to the top menu e Change the INPUT e When there are invalid music files the mark will be displayed for the file The displayed play time may differ slightly from the actual play time depending on the files Slide show Buttons for sl
15. Go to TV Menu gt Setup gt View setting gt Wall mount audio setup s amp c4 A DRE SCREW e mills WALL MOUNT UNIT Y C3 El i CABINET Dal 2 Ix 8 12 Min 12 DEPTH OF 600 80 MOUNTING HOLES MOUNTING HOLES e VESA screw hole specs A B in millimeters 600 400 e Standard screw M8 e Quantity 4 1 Must be smaller than the shaded area 2 Use 1 25 pitch screws GB 86 Appendix User adjusted Universal viewing User adjusted rating Universal viewing Parental approval pref Parental approval Universal viewing Abbrevatedtern ARC DVB T Digital Video Broadcasting Terrestrial High Definition Multimedia Interface DVB S2 Digital Video Broadcasting Satellite Second Generation MHEG Multimedia and Hypermedia Expert Group OSD JjOnSceenDispay USB UniversalSerialBus WPS Wi Fi Protected Setup GB 87 Appendix Dimensional drawings LC 60UQ10E LC 70UQ10E LC 60UQ10EN LC 70UQ10EN LC 60UQ10KN LC 70UQ10KN 169 169 979 934 522 385 385 200 400 265
16. PC terminal HDMI 2 PC AUDIO L R RGB cable 23 5 mm stereo commercially minijack cable available commercially available PC PC terminal 5 e HDMI 2 PC AUDIO L R DVI RGB conversion 9 0 3 5 mm stereo cable minijack cable commercially commercially available available When using the PC terminal you must select Video Audio in the Audio select menu refer to page 46 for details NOTE e For PC connection via the PC terminal a cable with ferrite cores is recommended e The PC input terminals are DDC 2B compatible e Refer to page 61 for a list of PC signals compatible with the TV 68 59 Displaying a PC image on the TV Selecting the picture size You can select the picture size 1 Press e The Wide mode menu displays 2 Press 9 or A F to select the desired item EXAMPLE Normal Keeps the original aspect ratio in a full screen display For letterbox pictures Bars may appear on the top and bottom with some programmes An image fully fills the screen Displays an image with the same number of pixels on the screen Dot by Dot NOTE e You can also select an item from the Wide mode menu Page 45 Connect the PC before making adjustments e Selectable picture size may vary with input signal type e You may not be able to change the wide mode while in 3D mode e Refer to page 45 for AV signals HDMI 4801 480 5761
17. 4 71 e Follow the instructions the screen for 2 satellites on toneburst switchbox Max 4 satellites on DiSEqC multiswitch and Communal satellite system settings To set multiple satellite channels go to Max 4 satellites on DiSEqC multiswitch e When a power supply is needed for your satellite antenna follow the procedure below in order to supply the voltage specified by your service provider etc Go to Menu gt gt View setting gt Channel settings gt Antenna setup DIGITAL gt Satellite setup gt Change setting Communal satellite system Search start DVB S S2 channel searching 1 Press lt p gt to select Yes and then press OK e To change the settings for Scrambled stations press A V to select the item to be reconfigured and then perform Search start Scrambled stations Yes Search start Start search 2 TV searches for and stores all the receivable TV stations according to their settings and the connected antenna e Select Yes to sort the search result in alphabetical order To abort the initial auto installation in progress press NOTE e Scrambled stations Specifies if you need to choose pay TV services e Follow the procedure to perform Manual search if you want to configure the frequency or symbol rate and start to search after performing the auto searching during the initial auto inst
18. Model select and then then press OK 1 Press A V to select Recorder EPG and then press OK The HDMI device changes every time e The linked recorder now powers on and the TV press OK you press OK automatically selects the appropriate external input e The external input source switches and the source recorder s EPG is displayed e The title list data from the connected AQUOS BD player AQUOS recorder displays Select the programme to record e Refer to the operation manual of the recorder for 2 Press MENU to hide the menu screen to details operate A W 4 9 buttons 3 Select the title with a 4 b and then press Change audio output device PLAY gt By AQUOS audio SP You can choose to listen to the TV sound only from the AQUOS AUDIO speaker system You can call up the menu of an HDMI CEC Press A V to select AQUOS audio SP compatible external device player recorder etc and then press OK using the Setup menu function The sound from the TV speaker and headphone Press A V to select Setup menu and then terminal is silenced and only the sound from the press OK AQUOS AUDIO speaker system is audible e Audio description sound is not available NOTE e f a connected device does not have this function By AQUOS SP l or the device is in a status where the menu cannot You can choose to listen to the TV sound only from be displayed recording entering standby etc this the AQUOS TV s
19. gt Clock setup gt Time adjustment NOTE e You cannot set the manual clock setting during USB recording A list of programmes scheduled for recording can be displayed 1 Press EPG 2 Press B to display the timer list To playback the recorded programmes open the USB recording list and select the desired programme 1 Goto gt Record list 2 Press OK button Press Ml to return the scene that is broadcasting NOTE e You may not playback recorded programmes when the programme provider restricts or completely prevents recording or later watching of an encoded programme e Depending on the protection signal specified by a broadcast station recorded broadcasts can only be played back for a certain period of time or cannot be played back at all Page 11 Other useful features Time shift playback The counter displays the screen with the control Jump time setting Playback recorded scenes of the programme being panel recorded You can set the time interval for playback to resume Press gt during recording 00 02 38 00 08 18 after jumping backwards forward Press to return the scene that is broadcasting Q Go to TV Menu gt Setup gt View setting gt NOTE Current playback time USB REC setting gt Jump time setting e You can also operate from the control panel by pressing e A time interval from 10 sec to 99 min 50 s
20. 144 Aa if you set the PIN and any options for Parental rating except None are selected Do not disconnect the USB HDD used for USB recording during USB recording operation Other useful features You can record the programme you are watching to the registered USB HDD Press REC The TV starts USB recording NOTE e You can also operate from the control panel by pressing CONTROL e You cannot switch the channel or the input source during USB recording e During USB recording the TV cannot display photos or play music from the internet Home network or USB storages e You may not record programmes e Press REC STOP BM e The screen prompt pops up 2 Press lt p to select Yes and then press e USB recording has completed NOTE e You can also operate from the control panel by pressing CONTROL You can set the USB recording timer setting for programmes you want to record NOTE e To prevent the first part of the programme from being cut start recording the programme a few seconds earlier than time set to start recording e When recording viewing timer settings are set continuously for multiple programmes schedule the recording of the previous programme to end earlier than the end of the programme itself Recording viewing timer setting of the next programme will start after that A message will be displayed when the scheduled time overlaps with an existing
21. No 1 The confirmation message is displayed Press 3D 2 Press lt gt to select Yes and then press OK 2 Turn on the power of the 3D glasses and then wear the 3D glasses e f you do not want to switch to 3D mode automatically set 3D auto change to No e When the TV is receiving a 3D image signal that can be detected automatically the 3D mode icon is displayed in the channel display When you press 3D while you are watching the TV in 3D mode the TV switches to 2D mode Press 3D during the 3D mode Select Yes and then press OK to switch to 2D Take off the 3D glasses and turn off the power of the 3D glasses e f the input signal switches to 2D 2D images are displayed automatically e 3D mode is canceled automatically when the setting is changed input source is changed the input signal resolution is changed or the power is turned off When the TV receives a 3D image signal that cannot be detected automatically you can select between 3D and 2D image viewing 1 Press 3D A screen appears prompting you to select between 3D and 2D image viewing 20 GB 73 2 Press 4 to select 3D or 2D and then press OK To view 3D mode CD Press lt p to select the 3D signal type 2D 3D Side by Side or Top and Bottom and then press OK 2D gt 3D Side by Side Top and Bottom f you select the same system as that of the input signal 3D im
22. Off Here you can select a recorder for the recording from several connected recorders NOTE f you have connected the AQUOS AUDIO speaker system between the TV and an AQUOS recorder the external source s indication changes e g from HDMI 1 to HDMI 1 Sub This function allows you to select the channel of the connected HDMI device using the TV s remote control unit 1 Press to select the input source of the connected HDMI device you want to control using the TV s remote control unit and then press OK Press lt p to select On and then press This function allows you to automatically switch to the appropriate sound mode depending on the genre information included the digital broadcast If this function is set to Auto the TV can send audio data for video content shown on the TV to a connected audio device with just one ARC compatible cable Using this function eliminates the need to use a separate digital or analogue audio cable Connection for using Audio return channel e You need to use ARC compatible cables devices and connect to the HDMI 3 terminal to activate this function The connection method is the same as Connecting an AQUOS BD player AQUOS recorder via the AQUOS AUDIO speaker system Page 31 GB 32 Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI connected device with a single remote control unit EXT MEDIA
23. Press 1 gt 7 gt 9 gt 2 gt 5 e 49 25 MHz Press 4 gt 9 gt 2 gt 5 gt OK Colour sys Select the optimum colour system to receive Auto PAL SECAM Sound sys Select the optimum sound systems broadcasting systems to receive B G D K Il L L Label When a TV channel sends its network name the Auto installation detects the information and assigns a name to it However you can change channel names individually Select each character of the new name for the channel with using the software keyboard Page 13 NOTE e he name can be five characters or less Skip Channels with Skip set to On are passed over when using P A M even if selected while watching the image from the TV Lock You can block the viewing of any channel NOTE e PIN for setting a PIN e When Lock is set to On for a channel Child lock has been activated displays and the image and sound of the channel are blocked When pressing while Child lock has been activated displays the PIN input window will display Inputting the correct PIN unlocks the temporarily until the power is turned off GB 42 Sort Channel positions can be sorted freely 1 2 3 4 Press lt p to select Yes and then press Press A V lt p to select the channel you want to move and then press OK Press 4 VW lt p to move it to the desired po
24. 4 9 to select the USB device where you want to find your files and then press OK e You can select from or Folder for the type of folder directory in Folder display setting When the Home network menu is displayed Press A V to select the Home network server where you want to find your files and then press OK e Press Y to search for servers 2 Press lt p to select among Photo mode Music mode or Video mode and then press OK NOTE e he explanations for the buttons that can be used in each mode are the explanations when using USB media mode Some operations may differ in Home network mode Follow the guide display during operations e You do not need to select the drive server in step 1 when there is only one drive in the connected USB device or there is only one Home network server connected to the TV e 16 is the maximum number of drives that can be displayed in USB media mode e 10 is the maximum number of servers that can be displayed in Home network mode e You cannot enter these modes when there is no server connected to the TV in Home network mode GB 55 52 5 y This screen image is for the SD USB media mode It may be slightly different in the Home network mode Demo jpg 2007 10 18 13 30 00 O0KB 1600X1200 Buttons for thumbnail operations When using SD USB media mode Buttons Description When selecting a folder icon Enter this
25. DivX content DivXG VOD deregistration You can find your deregistration code on this menu You need to deregister the TV at www divx com to release the registration USB device compatibility DivX 3 11 4 x 5 1 6 0 XviD H 264 MPEG4 Motion Jpeg DivX 3 11 4 x 5 1 6 0 XviD H 264 MPEG4 DivX 3 11 4 x 5 1 6 0 XviD MPEG4 VC 1 MP3 Dolby Digital DTS LPCM ADPCM MP3 Dolby Digital DTS LPCM ADPCM MP3 Dolby Digital LPCM WMA Photo file format JPEG Music file format MP3 Video file format MPEG2 PS MPEG2 TS WMV ASF MP4 MOV AVI NOTE Progressive format jpeg files are not supported e Some video file formats may not be played depending on the file and server Selecting the picture size for video mode You can select the picture size in Video mode 1 Select Video mode Windows Media e Refer to Selecting modes and drives servers Video v9 2 Press 9 2 Dolby Digital The Wide mode menu displays Motion Jpeg Dolby Digital Plus 3 Press to select the desired item AAC As you toggle the options each is immediately MPEG Dolby Digital reflected on the screen There is no need to press MPEG OK MPEG1 LPCM EXAMPLE Sorenson MP3 H 264 AAC e Progressive format jpeg files are not supported e Files in USB 1 1 devices may not be played properly e Operation using USB hubs is not guaranteed e Some video file formats may not be played
26. First connect the AQUOS AUDIO speaker system or an AQUOS BD player AQUOS recorder that supports the HDMI CEC protocol DIGITAL AUDIO OUTPUT AQUOS BD player AQUOS recorder AQUOS BD player AQUOS recorder AQUOS AUDIO speaker system HDMl certified cable commercially available HDMI certified cable commercially available Optical audio cable commercially available The ARC Audio Return Channel function works only when using the HDMI 3 terminal NOTE e Refer to the operation manual of the device to be connected for further details e After unplugging connection cables or changing the connection pattern turn on the power of the TV after all relevant devices power have been turned on Change the external input source by pressing gt select the appropriate external source and verify the audiovisual output The cables illustrated in the following explanation are commercially available items GB 31 AQUOS LINK AQUOS LINK setup Go to TV Menu gt Link operation gt AQUOS LINK setup gt select the menu you want to set Set to On to enable HDMI CEC functions If this is activated the one touch play function is enabled While the TV is in standby mode it automatically turns on and plays back the image from the HDMI source NOTE e The factory default for this item is
27. HD and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license ABOUT DIVX VIDEO DivXQ is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration YouTube and the YouTube logo are trademarks of Google Inc x v Colour and xv Colour are trademarks of Sony Corporation The Wi Fi CERTIFIED Logo is a certification mark of the Wi Fi Alliance The Wi Fi Protected Setup Mark is a mark of the Wi Fi Alliance Wi Fi CERTIFIED Miracast and Miracast are trademarks of Wi Fi Alliance DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance All other company or product names are trademarks or registered trademarks of their respective companies MHL the MHL Logo and Mobile High Definition Link are trademark or registered trademarks of MHL LLC in the United States and other countries Manufactured under license under U S Patent Nos 5 95
28. SD memory card e Create a folder named WP in the root directory of the This function is available only when Quick start is USB device or SD memory card the first directory when Mumination set to On Wallpaper the USB device is opened and store into the folder the the ED orndhedrontotr TV Activating the function will display still images when the TV is in standby mode Illumination still images you want to display for the wallpaper e You must insert the USB device or SD memory card into the TV before it is turning off illuminated in several ways pone sia at os 2 Ad the A till You can set the length of time the TV will remain in images pre installed in the TV or your favourite sti Off not illuminated Mes ide in the USB Mis the Wallpaper mode 3 hours 6 hours 12 hours 24 hours The LED is illuminated while the TV is card Standby in standby mode NOTE The LED is illuminated while you watch e Setting Quick start to consumes more power TV Pre installed The images pre installed in the TV will No buttons except for 1 work even while the still E be displayed in a slideshow images are being displayed The LED is illuminated all the time Images stored for the wallpaper will If the ready for use USB device is not inserted the still NOTE appear images pre installed in the TV will be displayed in a l slides
29. When Quattron Pro Drive Mode is set to Mode 1 or Mode 2 the following modes do not work Motion enhancement ActiveMotion 800 and 200 Hz If you want to use this mode set Quattron Pro Drive to Off e Quattron Pro Drive is not available when The 800 or 200 Hz mode is selected 3D mode is THX Room Mode Setting Adjust the picture to room illumination or ambient brightness This function is available only when AV MODE is set to MOVIE Bright room Select this item for a bright room Dark room Select this item for a dark room Clear Picture Processing Processes noise included in broadcast signals to improve picture quality D Improves picture quality through Clear Picture Processing at a level above Middle on Turn OFF the function for improving picture quality through Clear Picture Processing Basic adjustment mjo Advances Adjusts the colour temperature to give the best Automatically adjusts the brightness of the screen This TV provides various advanced functions for white image optimising the picture quality The brightness is fixed at the value set in Go to TV Menu gt Setup gt Picture gt Backlight Advanced Displays the OPC effect on the screen Natural tone On Display while adjusting the brightness of the This function adjusts the hue of a selected colour Intermediate tone between Middle l Mid Low i i using a six colour adjustment sy
30. When connecting a PC to the PC Video Audio terminal and inputting analogue audio signals from the AUDIO L R jack This setting allows you to skip the inputs on the input source selection operation Go to TV Menu gt Setup gt Option gt Terminal setting gt Input skip NOTE e When you select ATV DTV or SAT the skip function works only when using the button on the TV If you connect external equipment to an HDMI terminal which you have set to be skipped a notification message appears on the display when a signal is received from the connected external equipment Press OK to reset the related skipping setting so that the input terminal becomes available For setting the signal type of external equipment 1 Press 5 to select the input source for setting the input signal 1 from the INPUT menu and then press OK Go to TV Menu gt Setup gt Option gt Terminal setting gt Input select EXT1 Y C CVBS RGB 2 AUTO COMPONENT VIDEO NOTE e If no colour image displays try changing to another signal type e Check the operation manual of the external equipment for the signal type e When the signal type is set to Auto the input terminal where a cable is connected is automatically selected e When the signal type is set to Auto and multiple video signal cables are connected Video will
31. a locked channel you must enter the PIN see pages 41 and 42 for locking channels from viewing in DTV SAT and ATV mode When you select a locked channel a PIN prompt message pops up Press gt to display the PIN input window Parental rating This function allows DTV services to be restricted It prevents children from watching violent or sexual scenes that may be harmful 1 Goto TV Menu gt Setup gt View setting gt Individual setting gt Parental rating 2 Repeat steps 1 to 4 in when selecting Yes to the left NOTE e Universal viewing and Parental approval pref are ratings used exclusively in France e Refer to page 87 for details about ratings GB 43 Individual setting Clock Clock setup You can adjust the time manually and change the clock display Go to TV Menu gt Setup gt View setting gt Individual setting gt Clock setup This function allows you to set the clock manually NOTE f you select No the TV will try to get the time for the broadcast This function allows you to display the clock time in the lower right corner of the screen Displays the clock time Displays the clock time in 30 minute increments Hides the clock time On half hourly You can select the time format either 24HR or for the clock time You can select the type of the clock
32. and compulsory as of 30 November 2011 The label language is neutral Brand and product name Energy efficiency class Energy efficiency class 7 classes 7 colours A to subsequently A to F A to E A to 0 measurement values are the visible surface of the panel and ON mode consumption that contributes to the protection of the environment and to a lower carbon society Dum 1 SEND ON OFF switch yes no Power consumption watts The figure below shows the advanced label design and explains the information included For further information please visit the Sharp internet homepage http www sharp eu ENERGIA ENEPTEIA ENERGIJA ENERGY ENERGIE Annual energy consumption in kWh based on 4 hours operation per day 365 days per year Screen diagonal cm inch Regulation designation and year of commencement of the compulsory use of The retailer or online shop where you purchased your television from would have ihe Bibel displayed the label and its corresponding rating If in doubt please consult them 52 2010 1062 2014 The illustration is not to scale According to EU Regulation 1062 2010 the EU energy label TV appliances amounts to at least 6 x 12 centimetres NOTE e Methods for calculating the Energy Efficiency Index and the annual on mode energy consumption are set out in Annex Il of Regulation EU No 1062 2010 The determination
33. and the 2D images switch to 3D images The 3D glasses can be used by receiving a signal sent from the TV The 3D glasses turn off automatically after 15 seconds if no signal is received from the TV Operating range From directly the TV approx 5 m within approx 30 horizontally and 20 vertically Enjoying 3D image viewing Replacing the Battery The battery has an expected service life of approximately 75 hours e When replacing the button battery use only the designated battery Maxell branded CR2025 lithium button battery 1 Use the tip of a ballpoint pen or similar object to press in on the lock 2 While pressing in on the lock place your fingertip in the groove and pull out the battery holder e Pull the battery holder all the way out 3 Replace the battery D Use the tip of a ballpoint pen or similar object to remove the battery 2 Insert a new battery e Insert the battery with the negative side facing up 4 Align the battery holder with the battery slot on the 3D glasses and slide it back into place Press it in until it locks NOTE e Take not to reverse the battery poles and when loading the battery e Used batteries should be disposed of strictly in accordance with the applicable local laws and regulations 6B 70 Enjoying 3D image viewing Cautions for 3D image viewing 3D glasses lenses
34. be selected GB 46 Input label You can label each input source with a custom description 1 Press S to select the desired input source from the INPUT menu and then press OK 2 Goto TV Menu gt Setup gt Option gt Terminal setting gt Input label 3 Select each character of the new name for the input source with using the software keyboard Page 13 NOTE e The label can be six characters or less e This menu can be changed in the case of the following input sources EXT1 3 HDMI1 4 PC o HDMI auto view This function allows you to automatically change to the appropriate picture size when viewing an HDMI signal using the HDMI 1 2 3 and 4 terminals 1 Press amp to select the input source HDMI 1 HDMI 2 HDMI 3 or HDMI 4 connected to your HDMI device and then press OK Go to TV Menu gt Setup gt Option gt Terminal setting gt HDMI auto view Useful viewing functions o Headphone Audio out select You can select which device is used for outputting audio Go to TV Menu gt Setup gt Option gt Terminal setting gt Headphone Audio out select Output audio through headphones Output audio through an A V receiver or surround audio controller CAUTION e This terminal is also used for headphones Reduce the volume before using headph
35. cloth e Avoid using benzene thinner and other solvents as these may deform the cabinet and cause the paint to peel off Do not apply insecticides or other volatile liquids Also do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to peel off Introduction Caring for the front panel e Turn off the main power and unplug the AC cord from the wall outlet before handling e Gently wipe the surface of the front panel with a soft cloth cotton flannel etc To protect the front panel do not use a dirty cloth liquid cleaners or a chemical cloth wet dry sheet type cloth etc This may damage the surface of the front panel e Wiping with a hard cloth or using strong force may scratch the surface of the front panel Use a soft damp cloth to gently wipe the front panel when it is really dirty It may scratch the surface of the front panel when wiped strongly e f the front panel is dusty use an anti static brush which is commercially available to clean it WARNING To prevent the spread of fire keep candles or other open flames away from this product at all times 3D glasses Prevention of accidental ingestion Keep the accessory out of the reach of small children Small children can accidentally swallow these parts e f a child accidentally swallows any of these parts see
36. depending USB memory USB reader Mass USB device Storage class USB HDD File system FAT FAT32 NTFS Photo file JPEG jpg DCF2 0 compliant format MP mpo CIPA DC 007 MP3 mp3 Bitrate 32 k 40 k 48 k 56 k 64 k 80 k 96 k 112 k 128 k 160 k 192 k 224 k 256 k 320 kbps Sampling frequency 32 k 44 1 k 48 kHz Music file d NOTE Bitrate 128 kbps 2304 kbps Sampling frequency 8 k 16 k 22 05 k 24 k 32 k 44 1 k 48 k 88 2 k 96 kHz WMA wma Bitrate 32 kbps 192 kbps on the file Sampling frequency 8 k 11 025 k 16 k 22 05 k 32 44 1 48 kHz e Some USB devices may not work properly depending on the file system Subtitle file SRT SUB ASS SSA SMI format format Keeps the original aspect ratio in a full screen display Keeps the original aspect ratio and size An image fully fills the screen GB 58 Connecting a PC Connecting a PC PC HDMI 1 2 3 or 4 terminal D scorn Homi i owe D Homi UN af HDMI certified cable commercially available PC HDMI 2 terminal HDMI 2 PC AUDIO L R HDMI 2 DVI HDMI cable commercially available 03 5 mm stereo minijack cable commercially available When using the HDMI 2 terminal you must select the proper item in the Audio select menu depending on the type of HDMI cable connected refer to page 46 for details
37. either Digital or Analogue displayed in the lower right of the screen NOTE e This setting does not influence the clock displayed on the HOME screen Basic adjustment Individual setting Language e Digital audio language Set up to three preferred multi audio languages to display if the audio languages are available Go to TV Menu Setup View setting Individual setting Digital audio language Switching the multi audio languages Each time you press on the remote control unit the audio language switches up to two preferred subtitle languages including subtitles for the hearing impaired to display if subtitles are available Go to TV Menu Setup View setting Individual setting Subtitle Selectable items 1st language 2nd language For hearing impaired Switching subtitle languages Each time you press on the remote control unit the subtitle switches 1st language m 2nd language Set For hearing impaired to Yes Subtitles for the hearing impaired have priority over each of the subtitle language settings e g 1st language 2nd language etc EXAMPLE 1st language gt For hearing impaired 1st language NOTE e Subtitles will not be displayed when the programme does not contain subtitle information e Subtitles may not be displayed properly in 3D mode
38. experience dizziness nausea or other discomfort while viewing 3D images immediately discontinue use of the 3D glasses Using the 3D TV with incompatible 3D broadcasts or software can make images appear blurry or create overlapping images e When viewing 3D images continuously be sure to take a break periodically to prevent eye strain If you are nearsighted or farsighted or have astigmatism or a different level of eyesight between the left and right eyes you should take the necessary steps such as wearing eyeglasses to correct your eyesight before viewing 3D images The 3D glasses can be worn over eyeglasses e When viewing 3D images keep the 3D glasses horizontally level with the TV screen If you tilt the 3D glasses with respect to the TV screen the images viewed by the left and right eyes may appear significantly different or images may appear overlapping e View 3D images at the appropriate distance from the TV screen The recommended distance is three times the effective height of the TV screen Be careful of your surroundings when viewing 3D images When you view 3D images objects may appear closer or farther than they are This may cause you to misjudge the distance and possibly result in injury if you accidentally hit the screen or surrounding objects e he 3D glasses are not recommended for people aged less than 6 When children are viewing 3D images be sure a parent or guardian is present Monitor children viewing
39. expose the remote control unit to shock In Do not mix batteries of different types Different types of batteries have different addition do not expose the remote control unit to characteristics liquids and do not place in an area with high humidity Do not mix old and new batteries Mixing old and new batteries can shorten the life of Do not install or place the remote control unit under new batteries or cause chemical leakage in old batteries direct sunlight The heat may cause deformation of the Remove batteries as soon as they have worn out Chemicals that leak from batteries unit can cause a rash If you find any chemical leakage wipe thoroughly with a cloth remote control unit may not work properly if the e The batteries supplied with this product may have a shorter life expectancy due to remote control sensor of the TV is under direct sunlight storage conditions or strong lighting In such cases change the angle of If you will not be using the remote control unit for an extended period of time remove the lighting or the TV or operate the remote control unit the batteries from it closer to the remote control sensor Note on disposing batteries The batteries provided contain no harmful materials such as cadmium lead or mercury Regulations concerning used batteries stipulate that batteries may no longer thrown out with the household rubbish Deposit any used batteries free of charge into the designat
40. gt setup gt select the menu you want to set This function allows the TV to switch to 3D mode automatically when a 3D identification signal is detected When a 3D signal is detected the TV switches to 3D mode automatically When a 3D signal is detected the TV performs the 3D image detection in addition to Mode 1 Automatic change is not performed NOTE e 3D signals may not be detected depending on the signal format Select the method for adjusting the 3D image effect depth Adjusts the still image effect depth automatically For manual adjustment of the still image effect depth NOTE f you select Manual adjust the 3D still image effect depth with Depth change This function can be adjusted when viewing still images in USB media mode e Even if you select Auto the 3D still image effect depth may not be correctly adjusted depending on the 3D still image e 3D still images taken in macro mode will be displayed with excessive depth f you experience discomfort while viewing 3D images immediately discontinue viewing You can adjust the 3D still image effect depth Adjust the level from 10 to 10 0 is the level where no adjustment is made factory preset value NOTE This function can be adjusted when viewing still images in USB media mode e f you experience discomfort while viewing 3D images immediately discontinu
41. illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations e he examples used throughout this manual are based on 60 inch models Introduction Important safety precautions e Cleaning Unplug the cord from the AC outlet before cleaning the product Use damp cloth to clean the product Do not use liquid cleaners or aerosol cleaners Use a soft damp cloth to gently wipe the panel when it is dirty To protect the panel do not use a chemical cloth to clean it Chemicals may cause damage or cracks in the cabinet of the TV e Water and moisture Do not use the product near water such as bathtub washbasin kitchen sink laundry tub swimming pool and in a wet basement Do not place vases or any other water filled containers on this product The water may spill onto the product causing fire or electric shock e Stand Do not place the product on an unstable cart stand tripod or table Doing so can cause the product to fall resulting in serious personal injuries as well as damage to the product Use only a cart stand tripod bracket or table recommended by the manufacturer or sold with the product When mounting the product on a wall be sure to follow the manufacturer s instructions Use only the mounting hardware recommended by the manufacturer e When relocating the product placed on a
42. of the on mode consumption is based on the international standard EN 62087 2009 GB 90 SHARP SHARP CORPORATION http www sharp eu 14P02 PL NG
43. related inquiries relating to the third party content or service should be made directly to the applicable content or service provider You may not be able to access content or services from the device for a variety of reasons which may be unrelated to the device itself including but not limited to power failure other Internet connection or failure to configure your device properly SHARP its directors officers employees agents contractors and affiliates shall not be liable to you or any third party with respect to such failures or maintenance outages regardless of cause or whether or not it could have been avoided ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU ON AN AS IS AND AS AVAILABLE BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY OR REPRESENTATION OF ANY KIND TO YOU EITHER EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY NON INFRINGEMENT FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTIES OF SUITABILITY AVAILABILITY ACCURACY COMPLETENESS SECURITY TITLE USEFULNESS LACK OF NEGLIGENCE OR ERROR FREE OR UNINTERRUPTED OPERATION OR USE OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR EXPECTATIONS SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF THIRD PARTY CONTENT OR SERVICE PROVIDERS NOR ANY ASPECT OF THE CONTENT OR SERVICE RELATED TO SUCH THIRD PARTY
44. using the remote control unit or the TV due to the data capture process 7 me 9 dq P E Social Political Go to TV Menu gt Setup gt View setting gt 2 Show Game show E Individual setting gt Standby search gt EPQ Education Science ports i Factual topics A Display range setup Selon Suu 2e Leisure hobbies programmes select Yes The EPG data must be automatically lcon Icon News Current Arts Culture affairs without music The Display range setup allows you to select three types of time spans for display on the screen Press to select a level to pick out or search for programmes you want watch Go to TV Menu Setup gt Option gt EPG Standard Light Remark setup gt Display range setup Mode 1 Displays six hours of programme Wide angle information Mode 2 Displays three hours of programme Zoom information Mode 3 Changes to the EPG display format Vertical angle with a vertical time span GB 21 Watching TV category date time The illustrations on this page are explained using three digit services Press EPG C3 C3 C3 BBC THREE This is BBC THREE 1 Press 6 1 Press Y 2 Press A V to select the desired 2 Press 4 gt to select the desired genre and then press OK time span and then press OK
45. wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three pin plug Before replacing the plug cover make sure that If the new fitted plug contains a fuse its value is the same as that removed from the cut off plug The cord grip is clamped over the sheath of the mains lead and not simply over the lead wires IF YOU HAVE ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN CE Statement Hereby SHARP Electronics declares that this LCD TV is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The declaration of conformity may be consulted at http www sharp eu documents of conformity NOTE This LCD TV is designed for indoor use only CE Statement Hereby SHARP Electronics declares that the 3D glasses are in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC The declaration of conformity may be consulted at C http www sharp eu documents of conformity Introduction ENGLISH Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product To ensure safety and many years of trouble free operation of your product please read Important safety precautions carefull
46. 3 When the headphone is connected to the OUTPUT terminal the audio can be output from the speakers Page 47 4 HDCP 2 2 copy protected signal can be viewed via HDMI1 only Satellite antenna terminal HDMI 2 PC AUDIO L R Jack 2 2 The HDMI 2 and PC terminals can both use the same audio input terminal HDMI 2 PC AUDIO L R However the proper item must be selected in the Audio select menu refer to page 46 for details WARNING e Excessive sound pressure from earphones and headphones can cause hearing loss e Do not set the volume at a high level Hearing experts advise against extended listening at high volume levels NOTE e Use a product with the specified dimensions for optimal connection to HDMI cable USB device HDMI Body depth 12 mm or less length 32 mm or less USB Body depth 10 mm or less length 57 mm or less Connector depth 7 mm or less Part names and functions Remote control unit Er pel ej 15 LC 60UQ10E L C 70UQl1 OE 2 ATV DTV SAT RADIO LC 80UQ10E lasse E LC 60UQ10EN LC 60UQ10KN LC 70UQ10EN LC 70UQ10KN LC 80UQ10EN LC 80UQ10KN 4 3 22 1 ue a 1 TV Standby On Page 18 2 6 Access conventional analogue TV mode DTV Access digital TV mode SAT Access satellite mode RADIO DTV SAT Switch between radio and data mode e When only data broadcas
47. 3D images and if they show signs of discomfort immediately discontinue use of the 3D glasses People with a known history of photosensitivity and people with heart problems or poor health should not use the 3D glasses This can worsen existing health conditions Do not use the 3D glasses for other purposes such as general eyeglasses sunglasses or protective goggles Do not use the 3D function or 3D glasses while walking or moving around This may result in injuries due to running into objects tripping and or falling When using the 3D glasses take care not to accidentally strike the TV screen or other people Viewing 3D images may cause you to misjudge the distance to the TV screen and accidentally strike the screen resulting in possible injury It is recommended that you do not view 3D images if you are sleep deprived or if you have been drinking alcohol GB 67 Enjoying 3D image viewing Preparing for the 3D glasses Make sure the following accessories are provided with the 3D glasses Nose pad 3D glasses x 2 x 2 Cleaning cloth x 1 A Nose pads are already attached NOTE e The illustrations above are for explanation purposes and may vary slightly from the actual accessories Power button LED indicator Nose pad The power turns off automatically in the following cases When pairing fails When the 3D glasses are not operated in standby for GB 68 Power b
48. 576 720 10801 1080 he PC terminal is not compatible with 4801 5761 1080 signals Connecting a PC Orre This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI RGB conversion cable etc 1 Press gt select from the INPUT menu and then press OK 2 Goto TV Menu gt Setup gt Option gt Terminal setting gt PC signal setting gt Auto sync NOTE e When Auto sync is successful Auto Sync completed successfully displays If not Auto sync failed e Auto sync may fail even if Auto Sync completed successfully displays e Auto sync may fail if the PC image has low resolution has unclear black edges or is moved while executing Auto sync e Be sure to connect the PC to the TV and switch it on before starting Auto sync Auto sync can be executed only when inputting analogue signals through the PC terminal e his function is available for 3D images converted from 2D images or normal 2D images CO Fine syno Ordinarily you can easily adjust the picture as necessary to change image position using Auto sync In some cases however manual adjustment is needed to optimise the image 1 Press gt to select from the menu and then press OK 2 Goto TV
49. 6 674 5 974 380 6 487 535 amp other U S and worldwide patents issued amp pending DTS the Symbol amp DTS and the Symbol together are registered trademarks amp DTS 2 04 Digital Out is a trademark of DTS Inc Product includes software DTS Inc All Rights Reserved gt indicates compatibility between TV products and 3D Glasses which compliant with the Full HD 3D Glasses format and does not indicate picture quality of TV products Full HD 3D Glasses logo and Full HD 3D Glasses word are trademark of Full HD 3D Glasses Initiative Netflix and the Netflix logo are the registered trademarks of Netflix Inc THX and the THX logo are trademarks of THX Ltd which are registered in some jurisdiction All rights reserved The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by SHARP Corporation is under license Other trademarks and trade names are those of their respective owners e The SDHC Logo is a trademark of SD 3C LLC GB 81 Software licences for Net TV powered SR EETTETE http www espial com e This product contains fonts provided by Monotype Imaging Inc Monotype is a trademark of Monotype Imaging Inc registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions e Tioga is a trademark of Monotype Imaging Inc and may be registered in c
50. Auto is selected the colour system for each channel is automatically set If an image does not display clearly select another colour system e g PAL Channel selecting effect This function shows a screen effect when choosing or changing channels Go to TV Menu gt gt Option gt Screen effect Channel selecting effect GB 47 Programme title display This function allows you to display programme information such as the title and airtime by tuning a channel Go to TV Menu Setup Option Screen effect Programme title display NOTE This function is available only when the DTV SAT mode is selected Adjusting image position For adjusting a picture s horizontal and vertical position Go to TV Menu Setup Option Screen effect Position Centres the image by moving it to the left or right Centres the image by moving it up or down NOTE e Adjustments are stored separately for each input source e Depending on the input signal type Wide mode setting or Video mode for the USB media mode a position setting may not be available e his function is not available for DTV broadcasts with MHEG signals e This function is available for 3D images converted from 2D images or normal 2D images Useful viewing functions Additional features When you display images by using the Wallpaper setting USB device or
51. C Supply voltage Frequenc Signal strength 4 y 80 QAM modulation EN Signal strength Current Max Quality ERR RR Current Max 0 Channel strength of DVB S S2 Signal strength Frequency 2 7 o 2 annel strength Symbol rate IT Band VertLow Signal strength mr Current EN Max Quality Current 6B 17 5 Position and align the antenna so that the maximum possible values for Signal strength and Quality are obtained NOTE e The values of Signal strength and Quality indicate when to check the appropriate alignment of the antenna You must supply power to the antenna in order to receive digitally terrestrially broadcast stations after connecting the antenna cable to the antenna terminal on the rear of the TV 1 Goto TV Menu gt Setup gt View setting gt Channel settings gt Antenna setup DIGITAL gt Supply voltage 2 Press lt p to select and then press OK Watching TV Daily operation Press on the TV or TV on the remote control unit From standby press 1 on the TV or TV on the remote control unit 2 TVO CONTROL P INFO gt DTV SAT RADIO 5252565 f you are not going to use this TV for a long period of time be sure to remove the AC cord from the AC outlet e Weak electric p
52. DTV 993 SIT 3 DTV 994 SIT 2 DTV 995 SIT 1 DTV 999 R Delete 1 Press to select the desired service 2 Press the colour button on the remote control unit corresponding with the item you want to reconfigure e mark indicates the operation is set to on Each time the colour button is pressed you can switch the corresponding operation on off NOTE e Depending on the installation country and or broadcaster or operator profile may only R option is available Basic adjustment Buttons for Manual adjust operation Press R button When the service is locked you must enter your PIN whenever you tune to the service CH skip Press G button Services with a mark are passed over when pressing P A M on the TV or remote control unit Pess Bullen The selected service is deleted If you want to watch the service you deleted once again perform Auto installation Additional search or Manual search Press B button The item position of services can be sorted D Press A V to select the service whose item position you want to move and then press OK DTV 994 SIT 2 v DTV 995 SIT 1 v 2 Press A V to move it to the desired position and then press OK DTV 994 SIT 1 v DTV 995 SIT2 v 3 Repeat steps 1 and 2 until all desired service items are sorted Favourite network selection When the country setting is Norway and DTV the user may
53. Do not apply pressure to the lenses of the 3D glasses Also do not drop or bend the 3D glasses Do not scratch the surface of the lenses of the 3D glasses with a pointed instrument or other object Doing so may damage the 3D glasses and reduce the quality of the 3D image Use only the cloth provided with the 3D glasses to clean the lenses Caution during viewing Do not use devices that emit strong electromagnetic waves such as cellular phones or wireless transceivers near the 3D glasses Doing so may cause the 3D glasses to malfunction The 3D glasses cannot operate fully at extreme high or low temperatures Please use them within the specified usage temperature range If the 3D glasses are used in a room with fluorescent lighting the light within the room may appear to flicker In this case either darken or turn off the fluorescent lights when using the 3D glasses Wear the 3D glasses correctly 3D images will not be correctly visible if the 3D glasses are worn upside down or back to front Other displays such as computer screens digital clocks and calculators may appear dark and difficult to view while wearing the 3D glasses Do not wear the 3D glasses when watching anything other than 3D images If you lie on your side while watching the TV with 3D glasses the picture may look dark or may not be visible Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D images Otherwise you may not be able to
54. ES encryptions e his TV has a built in wireless LAN function Using a separate USB LAN adapter may result in radio communications that do not comply with regulations on radio communications Therefor do not use a separate wireless LAN adapter 68 84 Environmental specifications 2 4 Annual Energy Consumption alid den Wi 197 KY Annual Energy Consumption 114 kWh 140 kWh 4 nergy Save Mode kWh Advanced 173 kWh 5 Energy Classification 1 Measured according to EN 62087 2009 2 For further information about the Energy Save function please see related pages in this operation manual 3 Measured according to EN 50564 2011 Standby power consumption applies when the TV is set to not receive EPG data 4 Annual energy consumption is calculated according to EU Regulation EU No 1062 2010 based on operating 4 hours per day for 365 days a year NOTE e The power consumption of on mode varies depending on the images the TV displays Mounting the TV on a wall e This TV should be mounted on a wall only with a SHARP wall mount bracket Page 4 The use of other wall mount brackets may result in an unstable installation and may cause serious injuries Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel Customers should not attempt to do the work themselves SHARP bears no responsibility for improper mounting or mounting that re
55. Menu gt Setup gt Option gt Terminal setting gt PC signal setting gt Fine Sync 3 Press to select the specific adjustment item 4 Press lt p to adjust the item to the desired position Centres the image by moving it to the left or right Centres the image by moving it up or down Clock Adjusts when the image flickers with vertical stripes Adjusts when characters have low contrast or when the image flickers NOTE For resetting all adjustment items to the factory preset values press A V to select Reset and then press OK Clock and Phase in the Fine sync menu can be adjusted only when inputting analogue signals through the PC terminal e This function is available for 3D images converted from 2D images or normal 2D images 6B 60 Connecting a PC PC compatibility chart Recolution Horizontal Vertical Analogue Digital VESA frequency frequency D Sub HDMI standard VGA 640x480 31 5 kHz 60 Hz VGA 60 Hz 60 Hz 60 Hz us VGA SVGA XGA WXGA SXGA SXGA and UXGA are registered trademarks of International Business Machines Corporation NOTE e This TV has only limited PC compatibility correct operation can only be guaranteed if the video card conforms exactly to the VESA 60 Hz standard Any variations from this standard will result in picture distortions GB 61 Connecting a PC PC control of the T
56. PROVIDERS INNO EVENT WILL SHARP AND OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT INDIRECT SPECIAL INCIDENTAL PUNITIVE CONSEQUENTIAL OR OTHER DAMAGES WHETHER THE THEORY OF LIABILITY IS BASED ON CONTRACT TORT NEGLIGENCE BREACH OF WARRANTY STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Specifications Model LC 80UQ10E LC 70UQ10E LC 60UQ10E LC 80UQ10EN LC 70UQ10EN LC 60UQ10EN LC 80UQ10KN LC 70UQ10KN LC 60UQ10KN LCD panel 203 cm 80 X Gen panel 177 cm 70 X Gen panel 152 cm 60 X Gen panel TV function standard Digital DVB T 2K 8K OFDM DVB S S2 DVB T2 1K 2K 4K 8K 16K 32K OFDM DVB C IR A ch E69 ch Digital 2 69 ch F2 F10 ch 121 169 ch IR J ch Hyper band 51 541 ch Satellite 950 2150 Auto Preset 999 ch non Nordic DTV Auto Preset 9999 ch Nordic DTV Auto Preset 99 ch ATV Auto Label Auto Sort Auto Preset 9999 ch Stereo Bilingual A2 NICAM Audio amplifier 10W x 2 15W x 1 150 mm x 32 mm x 2 0 80 mm x 1 Terminals Antenna VHF UHF 75 Din type analogue amp digital 75 Q F type DVB S S2 Receiving channel TV tuning system RS 232C D sub 9 pin male connector EXT 1 SCART AV input Y C input RGB input TV output EXT 2 RCA pin Component Video Audio L R input mini D sub 15 pin OUTPUT Headphones RCA pin A
57. R Programme info Search by genre Search by date Timer list 3 Press A V to selecta programme Today ie want to watch and then press are SIT 3 ES Refer to page 21 for the genre setting 92 ss BacktoEPG Enter 1 Week 5 EEE This THREE C Movie Drama 3 Press A V to select the desired lt gt Select ID Enter EB Back GED Exit CIL programme and then press OK CETT NOTE NOTE FB Children s Youth programmes e You can also display this setting screen e You can also display the EPG screen from TV Menu gt EPG gt EPG Ej Music Ballet Dance Mon ee 2 s Select a programme 00000000000 Display the timer list for TV NOTE rogrammes D Select the time span 3 Check programme e You can also display this setting screen prog Press lt gt to select the time span information from TV Menu gt EPG gt Search by CAD you want to search Senes Continue to press gt to display programmes in the next time span 2 Select the desired EF programme Press to select the desired programme e Refer to page 23 for the timer setup Press A W 4 9 to select the e f A Or v are displayed on the left of programme yOU want to check the services continue to press A V to display next or previous screen 2 Press R and then press OK to tune to the selecte
58. SHARP MODEL LC 80UQ10E LC 70UQ10E LC 60UQ10E LC 80UQ10EN 700010 LC 60UQ10EN LC 80UQ10KN LC 70UQ10KN LC 60UQ10KN OPERATION MANUAL 0 Quattron Pro LCD COLOUR TELEVISION SY 7 a HDMI MHL I Sdts SPECIAL NOTE FOR USERS IN THE U K The mains lead of this product is fitted with a non rewireable moulded plug incorporating a 13A fuse Should the fuse need to be replaced a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above which is also indicated on the pin face of the plug must be used Always refit the fuse cover after replacing the fuse Never use the plug without the fuse cover fitted In the unlikely event of the socket outlet in your home not being compatible with the plug supplied cut off the mains plug and fit an appropriate type DANGER The fuse from the cut off plug should be removed and the cut off plug destroyed immediately and disposed of in a safe manner Under no circumstances should the cut off plug be inserted elsewhere into a 13A socket outlet as a serious electric shock may occur To fit an appropriate plug to the mains lead follow the instructions below IMPORTANT The wires in the mains lead are coloured in accordance with the following code Blue Neutral Brown Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The
59. TV Press again within the several seconds that the channel display is on the screen Time information will be shown in the lower right corner of the screen for several seconds 4 Even when you change the TV channel you can display the time information with steps 2 and 3 above You can operate the menu settings using the TV control buttons TV control buttons Remote control buttons 4039 1 OK Y zt Watching TV Favourite Channel Information Before installation This function allows you to group your favourite channels in a separate list Pre setting My favourite in advance allows you to select your favourite channels more conveniently NOTE e My Favourite can only be used for DTV and SAT modes a separate list will be stored for each input source DTV SAT1 2 3 4 The maximum number of channels you can register in My favourite is 50 for TV broadcast which will be allocated 001 050 as favourite channel numbers 50 for Radio broadcast which will be allocated 051 100 as favourite channel numbers and 50 for Data broadcast which will be allocated 101 150 as favourite channel numbers How to add remove move your favourite channels Press the OK button to display the on screen channel list f you have already set your favourite channels you will be able to see CH list or My favourite depending on your previous selection Function buttons us
60. UDIO L R 3 5 mm jack audio output SD CARD SD SDHC memory card OSD language Arabic Chinese Czech Danish Dutch English Estonian Finnish French German Greek Hungarian Hebrew Italian Latvian Lithuanian Norwegian Polish Portuguese Romanian Russian Slovak Slovene Spanish Swedish Turkish Ukrainian AC 220 240 V 50 Hz Power consumption 80 297W 0 15W Standby 70 249W 0 15W Standby 60 193W 0 15W Standby Weight 80 61 5 kg without stand 71 0 kg with stand 70 42 5 kg without stand 48 5 kg with stand 60 32 5 kg without stand 38 5 kg with stand Operating temperature 0 40 C 1 The satellite channel s frequency may vary according to satellites and antennas 2 The HDMI 2 and PC terminals can both use the same audio input terminal 3 Standby power consumption applies when the TV is set to not receive EPG data As a part of our policy of continuous improvement SHARP reserves the right to make design and specification changes for product improvement without prior notice The performance specification figures indicated are nominal values of production units There may be some deviations from these values in individual units GB 83 Specifications Wireless LAN NOTE Frequency band 2400 2497 MHz e This TV has received the following certifications 5150 5850 MHz Wi Fi CERTIFIED certification programme from the Wi Fi Al
61. UT INPUT SWITCHING SELECTION A TOGGLE L T V D CHANNEL FIXED PEE 2 FIXED 1 2 1 2 1 4 4 7 8 NE E 1 99 CHANNELUP CHANNEL DOWN mr THREE DIGIT DIRECT CHANNEL 1 999 Non con countries TIV 7 FOUR DIGIT DIRECT CHANNEL 1 9999 Pre eer Peer DVB S S2 3 DIRECT CHANNEL 1 9999 Nordic Sone only DIGITAL NETWORK li DVB S S2 1 DIRECT lil CHANNEL 1 9999 DVB S S2 2 DIRECT ID TIUJPL ID T DW I l INPUT f SELECTIONB 1 IN p 1 1 CHANNEL 1 9999 DVB S 82 4 DIRECT CHANNEL 1 9999 Ny COMMAND PARAMETER CONTROL CONTENTS TOGGLE SELECTION JA V M D 1 STANDARD A v w p s wawG A v wp 1 s s w w p t e oweGo viuo r vovemx ajojo juo ofi me oome Eeosmov aveo 01811 aveo VOLUME POSITION WIDE MODE OLOCK 180 0 40 TOGGLE AV cane VETT ul 0 CANA W PANORAMA AV W CINEMA 16 9 S E 5 6 CINEMA 14 9 AV 7 NORMAL PO IMPO IW IJD E 9 JFUL PO
62. V e When a programme is set the TV can be controlled from the PC using RS 232C or IP The input signal PC video can be selected the volume can be adjusted and various other adjustments and settings can be made enabling automatic programmed playing Use an RS 232C serial control cable cross type ETHERNET cable commercially available or wireless LAN for the connections NOTE e his operation system should be used by a person who is accustomed to using PCs EE 3 aja ETHERNET cable commercially available Connect to the TV with the following settings made for IP on the PC IP protocol TCP IP Host IP address Set the IP address on the TV menu None Do not select Telnet or SSH Set a port number on the TV did bd menu Control port When you set your ID and password on the TV menu you need to enter them as soon as you connect to the TV NOTE e The connection will be cut off when there has been no communication for 3 minutes 1 Goto Setup gt View setting gt Network Setup gt IP Control Remote app gt Control setting gt Change To use IP Control select Enable Detail setting gt Set your login ID and password Set the port to use with IP Control Confirm the settings and then press OK O1 A ON RS 232C lolol RS 232C serial control cable cross type commercially available Set the RS 232C communications sett
63. X button you can access to NETFLIX page simply by pressing it You Tube e Netflix is available certain countries Unlimited membership required More information at www netflix com e When you deactivate Netflix refer to Netflix help on page 80 Operations in Net TV The illustrations on this page are for explanation purposes They are subject to change without notice TVO feJ 229 P INFO DTV SAT RADIO O Display the start page Go to HOME gt AQUOS NOTE e When switching to Net TV a message which requests a software update may display in some cases Select a service Press 4 9 to select the desired service and then press OK e Press to return to the previous page This may not function for some services Press END to return to the Net TV start page Exit Net TV Press ATV DTV SAT e You can exit from Net TV by pressing gt and select another input source 66 Use the software keyboard Page 13 when you need to input text You can clear the Net TV memory which includes the lock code passwords cookies and browsing history Go to TV Menu gt Setup gt View setting gt Net TV setting gt Clear Net TV memory NOTE e PIN input is required when executing Clear Net TV memory The default PIN is 1234 To change the PIN setting ref
64. age 18 Pages 52 54 Connection overview You can turn on off the Pages 26 31 power using both the Be sure to turn off the TV and remote control and the any devices before making any c TV Jem P INFO CO DTV SAT RADIO TV connections EXT MEDIA E C CE REC REC STOP DTV SAT RADIO ING abc def C C yh ghi mno pars tuv WXYZ 819 Switch input sources Page 18 Page 18 Pages 55 58 T Page 18 You can also select channel from HOME gt CH list Pages 59 63 WO ME P P 4 C Vo AVMODE MJ APP II II 0 21 23 12 64 68 The following service is now available e YouTube Page 12 Net TV Pages 66 68 Pages 67 76 Pages 35 50 Some menu items greyed You can launch Internet out in 3D mode This is not connection and Home malfunction network functions as ed well as perform settings for the TV from the screen Quick guide Inserting the CA card into the module In order to receive coded digital stations a common interface module CI module and a CA card must be inserted in the CI slot of the TV
65. ages are displayed You can select only 2D 3D in ATV mode 2 Turn on the power of the 3D glasses and then wear the 3D glasses To view in 2D mode e Switching from 3D to 2D mode Press lt p gt to select the 2D signal type Side by Side or Top and Bottom and then press OK Side by Side Top and Bottom f you select the same system as that of the input signal 2D images are displayed Enjoying 3D image viewing You can convert normal 2D images into 3D images 1 Press 3D 2 Press lt gt to select 2D 3D and then press OK 3 Turn on the power of the 3D glasses and then wear the 3D glasses NOTE e he confirmation message to select either 3D or 2D mode is displayed on the screen once per hour e When the TV converts normal 2D images into 3D images you can display the 2D 3D convert effect menu to adjust the convert effect by pressing Y You can switch back to the previous mode by pressing 3D 1 Press 3D e A confirmation message is displayed 2 Select Yes and then press OK e The TV returns to the previous mode Pressing 3D in 3D mode displays the 3D menu Press the coloured buttons to make the necessary settings ES cc C3 ccc G Y B Co 5 O c9 Description 3D brightness boost Page 75 Surround Page 38 e he surround mode changes each time you press G 2D 3D convert effect Page 75 e 2D 3D con
66. allation Go to TV Menu gt gt View setting gt Channel settings Programme setup Satellite setting Manual search Initial auto installation If you install a DVB T T2 C S S2 antenna for the first time or relocate it you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen 1 Goto TV Menu gt Setup gt View setting gt Channel settings gt Antenna setup DIGITAL 2 Press to select Digital setup or Satellite setup and then press OK Checking signal strength 3 Press to select Signal strength and then press OK Signal strength for DVB T T2 C Supply voltage Signal strength Channel strength CH No Signal strength PEER EEE EERE EEE Current o Quality NER EEE Current o Max 0 Signal strength for DVB S S2 Channel strength Signal strength Current o Quality HERREN RR RR Current o za Checking channel strength 4 Press to select Channel strength and then press OK e You can input a specified frequency band using the 0 9 numeric buttons Channel strength of DVB T T2 Supply voltage Signal strength Frequency 80 Channel strength Signal strength ERREUR Current ES Max Quality Current o Max Channel strength of DVB
67. an also connect the TV to your Home network server through a router or access point The TV connection to the router can either be wired or wireless NOTE e f you choose a wired connection to the router you need an ETHERNET cable commercially available e f you do not have a broadband internet connection consult the store where you purchased your TV or ask your internet service provider or telephone company e An Ethernet and wireless connection cannot be used at the same time Use only one of the connection types A wireless LAN connection and performance cannot be guaranteed for all residential environments In the following cases the wireless LAN signal may be poor or drop or the connection speed may become slower When used in buildings made with concrete reinforced steel or metal When placed near objects that obstruct the signal When used with other wireless devices that emit the same frequency When used in the vicinity of microwave ovens and other devices that emit a magnetic field electrostatic charge or electromagnetic interference e stable connection speed is required to play back streaming content Use an Ethernet connection if the wireless LAN speed is unstable e Please use Category 5 ETHERNET cable Use an ETHERNET cable to connect the ETHERNET terminal on the TV to your broadcast router as shown below This is recommended when enjoying services which require stable connection speeds
68. and 3 after pressing OK e When an error message displays check to see if The USB device is inserted firmly e The USB memory has two or more software update files No data for updating the system exists in the USB memory e he software update file is broken e he software update file is not compatible with your TV s software he current system is same as the system update data The USB memory is not formatted by FAT32 5 displays the software version information after checking the data Press lt p to select Yes to update the system and then press OK 7 restarts automatically and the software update will be complete This operation may take a while CAUTION he Net TV memory which includes the lock code passwords and cookies may be cleared when the software update is carried out Cautions regarding use high and low temperature environments e When the TV is used in a low temperature space e g room office the picture may leave trails or appear slightly delayed This is not a malfunction and the TV will recover when the temperature returns to normal e Do not leave the TV in a hot or cold location Also do not leave the TV in a location exposed to direct sunlight or near a heater as this may cause the cabinet to deform and the LCD panel to malfunction Storage temperature 20 C to 60 Devices connected to the protect
69. and letters printed on the numeric buttons on the remote control unit 2 f you press END data service will close Connecting external devices Introduction to connections The TV is equipped with the terminals as shown below Find the cable corresponding the TV s terminal and connect the device O Before connecting e Be sure to turn off the TV and any devices before making any connections e Firmly connect a cable to a terminal or terminals e Carefully read the operation manual of each external device for possible connection types This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device Connection method for other devices gt 59 USB HDD Page 51 SD USB media A 73 gt 55 B internet C Pages 64 and 65 HDMI 2 PC AUDIO L R mm ES L ARC HDMI 3 P HDMI MHL HDMI 4 0 Homi DC 5V 900mA Ip cable EIE Component cable 2 2 VIDEO L 1 AUDIO 1 oo R SCART cable Audio cable Audio cable Q OUTPUT AUDIO L F v i DIGITAL Optical audio cable 6B 26 0 3 5 mm stereo minijack cable HDMI device Page 28 Game console 29 Video recordin
70. another or before you exit SD USB media from the INPUT menu e Home Network DLNA requires external streaming media software installed on a PC inside the HOME Network that is not included with AQUOS NET Home Network DLNA server software as Windows Media Player TVersity www tversity com Nero Media Home www nero com or Twonky Media Manager www twonky com are preferred but others can also be used Visit the DLNA website www dlna org to see the certified media server list Follow the server software s user manual for setup share and stream media contents You can Home Network DLNA Video Music and Photo data is organised in folders depending on the Server hierarchy options such as Artist Genre Composer Ratings Playlist or Watch Folders may be present for sorting content but can be different depending on the selected Media Server The Play To function of some PC Media Players may result in very compressed video quality For best video quality please use the USB Media Player function of the TV Home Network DLNA has a file size limitation of 30 MB Common operation Select SD USB media or Home network from the or INPUT menu to enter this mode 1 Press When the SD USB media menu is displayed 1 Press A Y to select Select USB drive and then press OK e he available selections are Select USB drive and Folder display setting 2 Press A V
71. atellite search setting on page 16 NOTE e After selecting Next in the DVB S S2 setting screen you need to select your preferred satellite broadcast to start searching Programme setup You can reconfigure the DTV service settings automatically or manually 1 Goto TV Menu gt Setup gt View setting gt Channel settings gt Programme setup 2 Press A V to select the broadcast standard you want to reconfigure and then press OK NOTE e PIN input is required when executing Programme setup The default PIN is 1234 To change the PIN setting refer to Individual setting PIN Page 43 To reset the PIN setting PIN input will no longer be needed refer to Reset the PIN Page 78 6B 40 You can reconfigure the following settings when you select Terrestrial in the initial auto installation or the Auto installation menu Additional search Use this menu to add new services automatically after Digital search in the Auto installation menu has been completed O Manual search Add new services within a specified frequency band e Enter the frequency using 0 9 numeric buttons e You can perform Manual search with a service number only when the five Nordic countries have been selected in the country setting Manual adjust Configure various settings for each service using the colour R G Y B buttons Service Service no nam CH skip Old LCN
72. cart it must be moved with utmost care Sudden stops excessive force and uneven floor surface can cause the product to fall from the cart e Ventilation The vents and other openings in the cabinet are designed for ventilation Do not cover or block these vents and openings since insufficient ventilation can cause overheating and or shorten the life of the product Do not place the product on a bed sofa rug or other similar surface since they can block ventilation openings This product is not designed for built in installation do not place the product in an enclosed place such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions are followed For ventilation leave a free space of at least 10 cm all around the set e he LCD panel used in this product is made of glass Therefore it can break when the product is dropped or impact applied If the LCD panel is broken be careful not to be injured by broken glass e Heat sources Keep the product away from heat sources such as radiators heaters stoves and other heat generating products including amplifiers o prevent fire never place any type of candle or naked flames on the top or near the TV set e o prevent fire or shock hazard do not place the AC cord under the TV set or other heavy items Headphones Do not set the volume at a high level Hearing experts advise against extended liste
73. ch for more broadcasts execute Additional search from the Programme setup menu Pages 40 42 NOTE e f you turn off the power on the TV while performing a channel search the initial auto installation wizard will not appear The auto installation function allows you to execute the installation again from Menu gt Setup View setting Page 40 The initial auto installation wizard will abort if you leave the TV unattended for 30 minutes before searching for channels When Italy or France is selected in the country setting the default age restriction value is set to 18 Initial auto installation Press lt gt to select Terrestrial or Cable and then press OK Terrestrial Searching for terrestrial broadcasts The TV searches for sorts and stores all the receivable TV stations according to their settings and the connected antenna To abort the initial auto installation in progress press gt NOTE A region or service selection screen may display depending on the country settings or cable providers selections Follow the screen prompts to make the selections After searching for terrestrial channels the screen switches to the Satellite search setting Page 16 Searching for cable broadcasts To change each item to the appropriate settings 1 Press A V to select Scrambled stations Yes the MENU and then Search method Channel press OK Sta
74. d programme GB 22 Watching TV The TV can be switched to a programme or start 1 Press EPG recording for USB recording at the set time 2 Press 4 to select the programme with 1 Press EPG timer setup and then press OK 2 Press 4 gt to select the programme you Press 4 to select Cancel and then press want to set and then press OK 4 Press lt p to select Yes and then press Cancelling using B button on the remote control unit Press EPG Press B to display the timer setup list Press to select the programme you want to cancel timer setup and then press OK Press lt p gt to select Cancel and then press Press lt p to select Yes and then press Press 4 to select Watch or Record and then press OK e f you select the TV returns to the EPG screen 4 Press lt p to select Yes and then press OK he selected TV programme is marked with an icon 5 Press OK to select Back NOTE e You cannot select Record when the registered USB HDD is not connected to the USB port A combined total of 16 timer settings Watch and Record can be set ah dN GB 23 Watching TV Teletext What is teletext Teletext broadcasts pages of information and entertainment to specially equipped TV Your TV receives teletext signals broadcast by a TV network and decodes them into graphical for
75. de switches as shown in the following tables NICAM TV broadcasts selection Signal Selectable items Stereo NICAM STEREO MONO Bilinqual NICAM CH A NICAM CH B NICAM CH gua MONO Monaural NICAM MONO MONO A2 TV broadcasts selection Signal 0 Selectable items Stereo MONO Bilingual A CH B CH AB Monaural MONO NOTE e When no signal is input the sound mode will display MONO You can display the channel information by pressing on the remote control unit DTV mode ATV mode BBC ONE 1 DTV TV Audio ENG Video STEREO Subtitle gt gt New information Four digit numbers e g 0001 are displayed after selecting the five Nordic countries in the country setting or for some cable operators Also operator profiles use four digits SAT mode 73 72 pori TV Audio ENG STEREO Video 576i Subtitle Off gt gt New information 2 Satellite channels are displayed by four digit numbers e g 0001 3 You can set four satellite stations to SAT1 SAT2 SAT4 O Time display in channel information You can display the time information included in DTV SAT and teletext broadcasts NOTE e Skip step 1 if receiving DTV SAT broadcasts 1 Select a TV channel the time information is automatically captured 2 Press The channel display will appear on the
76. ded and the sounds in the medium and high ranges which have been lost due to the data being compressed will be restored This setting is effective when playing back audio through a wireless interface such as when using Bluetooth playback Low Range The low range will be extended Off No adjustment Clear voice This function emphasises speech against background noise for greater clarity Audio description setting This function allows you to enable output of audio description if the TV receives a signal including audio description NOTE e When the Audio description is set to On the audio description sound is superimposed on the main audio when you select a broadcast compatible with audio description If you do not clearly hear the sound for the visually impaired go to Menu gt Setup gt Audio gt Audio description setting Mix level and select the upper level to turn up the volume This function is available only for DTV broadcasts This Audio description setting menu is not displayed for the ATV or the external inputs The audio description sound is superimposed on the main audio only when the sound is output on the speaker sound output headphone sound output and sound for audio out output The sound is not output on the S PDIF sound output and the SCART sound output This function is not available for the AQUOS Audio speaker system This function does not work during USB recording playbac
77. deos from external SD USB devices SD card USB Memory USB card reader Mass Storage Class USB HDD or Home network server NOTE e o connect a Home network DLNA server refer to Network setup Page 64 This function may not work properly for some SD USB storage devices The corresponding file format is different between SD USB media and Home network DLNA Wide mode is fixed during Photo mode select Auto or Original e During Video mode you can select Auto or Original Depending on the Home network DLNA server the TV may not be able to recognise the contained data Use only alphanumeric characters for naming files Do not disconnect a Home network server from the TV while transferring files using the slide show function when a screen is switching to another or before you exit Home network from the HOME or INPUT menu Do not connect and disconnect a Home network DLNA server from the TV repeatedly When you update the content in USB device specially HDD using PC please perform the Safe Removal operation when disconnecting the device from PC Depending on the USB device the TV may not be able to recognise the contained data File names over 80 characters may vary depending on the character set may not be displayed Do not disconnect a USB device or memory card from the TV while transferring files using the slide show function when a screen is switching to
78. directory When selecting a photo thumbnail Enlarge the photo A Y 4 Select a desired item Cursor Return to the previous screen Folder Return to the upper folder When the top folder is displayed return to the top menu screen Select deselect items w mark appears on the selected items Y button Select BGM for the slide show Folder Move to the top menu screen Start the slide show Display SD USB media menu e 3D display Wide mode Select slide show interval Select slide show BGM Set all slide show image Reset all slide show image USB device removal The mode selected in Folder display setting NOTE e When there are invalid photo files the mark will be displayed for the file e he 3D mode icon appears on the thumbnails of 3D images If you do not switch to 3D mode for the 3D images they will be displayed in 2D e You can see the file name shooting date file size and pixel size of the selected photo on the left of the screen shooting date is only available in the EXIF file format B button Other useful features Buttons for enlarged photo display operation When using USB media mode Buttons lt gt Go to the previous next photo in the same directory Cursor Return to the thumbnail selection screen ID y Switch between 2D and 3D modes IRbutton Rotate the photo by 90 degrees to the left Rotate the photo by 90 degrees to the right
79. e his function is available for 3D images converted from 2D images or normal 2D images The 4 3 mode allows you to select between Normal and Full Go to TV Menu gt Setup gt Option gt 4 3 mode Normal range keeping 4 3 or 16 9 aspect ratio Ful Wide image without side bars 4 3 screen types 4 3 mode 4 3 mode Normal Full Useful viewing functions Terminal setting Digital audio output This function allows you to select the digital audio signal type Go to TV Menu gt Setup gt Option gt Terminal setting gt Digital audio output To stereo audio system To multi channel Dolby Digital DTS audio system Audio select When using the PC terminal or HDMI 2 terminal you must select which terminal uses the AUDIO L R jack for analogue audio input Go to TV Menu gt Setup gt Option gt Terminal setting gt Audio select When selecting HDMI 2 from the INPUT menu When connecting devices including a PC with a HDMI cable to the HDMI 2 terminal When connecting devices including a PC with a DVI HDMI cable to the HDMI 2 terminal and inputting analogue audio signals from the AUDIO L R jack Bitstream When selecting PC from the INPUT menu When connecting devices with an Video AV cable to the PC terminal displays images without audio
80. e mark c indicates the location of For 60 70 inch models the centre of the TV screen Refer to the operation manual of 3D 3D glasses AN 3DG40 glasses for details regarding usage Preparation Attaching the stand unit e Before attaching or detaching the stand unplug the AC cord 3 e Before performing work spread cushioning over the surface on which you will be laying the TV This will prevent it from being damaged e Be sure that two or more persons attach the stand CAUTION e Attach the stand in the correct direction e Be sure to follow the instructions Incorrect installation of the stand may result in the TV falling over e After attaching the stand to the TV do not hold the stand when you put up set up move or lay down the TV Do not remove the stand from the TV unless using wall mount bracket to mount it 1 Confirm that there are 14 screws twelve M5 screws and two M4 screws supplied with the stand unit 209999000909999 oo 2 Attach the supporting post to the stand base 4 CD Insert the claws of the supporting post into the stand base 2 Secure the post and the base using the M5 screws length 14 mm and a screwdriver 5 screws Insert the stand into the openings on the bottom of the TV hold the stand so it will not drop from the edge of the base area Make sure that the stand is firmly inserted into the TV Improper installation may result in tilting of the TV set
81. e viewing You can adjust the 3D effect when converting images from 2D mode to 3D mode Select a desired level of convert effect from 1 to 16 NOTE This function is only available when converting 2D images to 3D images e When you use this function image conversion on the TV will result in some differences in the original images and how they appear e 2D images that have been converted to 3D images may be viewed only for personal use This function allows you to display the elapsed time of 3D image viewing on the screen The elapsed time is displayed in Yes one hour increments after you start watching 3D images No jHidethetime This function displays 3D images for testing the 3D operation Clicking Start on the screen plays back 3D test images NOTE e f you press END during playback the previous screen will be displayed To enable this function set the location of the TV to STORE Page 14 Switch on signals to the 3D glasses When watching 3D images switch this setting to On Switch off signals to the 3D glasses This will stop the TV from influencing 3D glasses that may be in that area of the store Enjoying 3D image viewing Specifications 3D glasses Product 00 Dimension W x H x D 171 2 x 46 0 x 162 4 mm Approx 31 0 g including the lithium ion polymer rechargeable battery Operating temperature 10 40 C The 3D glasses cannot op
82. ec can CONTROL be selected Time shift playback may take a few moments to start O Total playback time of the content NOTE e Time shift playback will stop and the TV will return to The grey bar shows how much time has s Vou canus hetime nterna vomrsdpusmodha or normal broadcasting when a program is fast forwarded progressed x Dutfene y 9 to a scene that is near to the scene currently being e Hidden during recording or playback during broadcast The timing at which it returns depends recording 0 Depending on the protection signal specified by a NOTE Device registration broadcast station recorded broadcasts can only be i i played back for a certain period of time or cannot be CONTE on A i y 2 be T to register the played back at all Page 11 USB REC from TV Menu gt Setup gt Option gt AR NOTE for France Option for view Go to TV Menu gt Setup gt View setting gt e When switched scramble broadcast and non scramble USB REC setting Device registration broadcast during time shift playback a black screen Refer to USB HDD registration Page 51 may be displayed Auto input selection NOTE Only one USB HDD be registered for USB You can choose whether or not to switch the input recording Remove all USB HDDs except the one used source automatically when receiving an AQUOS for USB recording LINK or an Euro SCART compatible signa
83. ect a USB HDD from the TV repeatedly USB HDD registration It is necessary to first perform USB HDD registration for USB HDDs used for USB recording Directly connect only one USB HDD to the USB port while registering the USB HDD when two or more USB HDDs are connected USB HDD registration is not available e The screen prompt pops up When the USB HDD is connected to the TV Register the USB HDD Follow the on screen instructions to register the USB HDD NOTE e Only one USB HDD for USB recording can be registered on the TV Two or more USB HDDs for USB recording cannot be used at the same time e When a USB HDD is registered formatting may be performed In that case all data will be deleted When you disconnect the USB HDD be sure to the following steps Go to TV Menu gt Setup gt View setting gt USB REC setting gt Device removal NOTE e This menu item cannot be selected when a USB HDD for USB recording is not registered e The USB HDD registration for USB recording is cancelled in the following cases When the USB HDD is removed When another USB HDD is registered for USB recording only one USB HDD can be registered for USB recording GB 51 Other useful features How to operate USB recording You can enjoy DTV SAT recording or playback by connecting a commercially available USB HDD to the TV CAUTION Do not unplug the AC cord during USB recording
84. ed cable 1 Press to select HDMI 2 from the INPUT menu and then press OK 2 Goto TV Menu gt Setup gt Option gt Terminal setting gt Audio select gt select HDMI DVI HDMI cable 1 Press gt to select HDMI 2 from the INPUT menu and then press OK 2 Goto TV Menu gt Setup gt Option gt Terminal setting gt Audio select gt select HDMI Analogue NOTE e If a connected HDMI device is AQUOS LINK compatible you can take advantage of versatile functions Pages 30 33 e Video noise may occur depending on the type of HDMI cable used Make sure to use a certified HDMI cable e When playing the HDMI image the best possible format for the picture will be detected and set automatically e An ARC Audio Return Channel compatible audio receiver must be connected to the HDMI 3 terminal with an ARC compatible cable e All HDMI terminals support 3D image signals HDCP 2 2 copy protected signal can be viewed via HDMI1 only Supported video signal 480i 480p 576i 576p 720p 1080i 1080p 2160p See page 61 for PC signal compatibility Supported audio signal Linear PCM sampling rate 32 44 1 48kHz Dolby Digital DTS GB 27 Connecting external devices You will enjoy accurate colour reproduction and high quality images through the EXT 2 terminal when connecting a DVD player recorder or other device
85. ed collection containers set up at commercial businesses Part names and functions TV front side view 1 Standby ON 11 MENU Menu H gt Input source MENU e PA V Programme Til Channel Volume ul Geel gae SSS gem prat EE Illumination LED TV rear view continued Remote control sensor Page 6 OPC sensor Page 36 This panel emits a signal towards the 3D glasses you wear when viewing 3D images Refer to page 75 for details 1 3D mode Blue illumination 2D mode White illumination TV rear view USB3 ETHERNET USB 3 port USB 2 HDD port ETHERNET terminal DIGITAL AUDIO OUTPUT terminal DIGITAL AUDIO OUTPUT e DC 13V DC 5V DC 18V 30mA HDMI 2 PC 7 mS T AUDIO L terminal RS 232C lolol EXT 1 5 EXT 1 terminal RGB EXT 2 VIDEO AUDIO L R terminal Q OUTPUT AUDIO L R Homi HDMI 2 af Homi HDMI 3 af Hom HDMI 4 Homi DC 5V 900mA C I COMMON INTERFACE slot _ OUTPUT Headphones AUDIO L R terminal 3 r USB 1 port SD CARD slot 1 HDMI terminal HDMI 2 HDMI terminal HDMI ARC terminal 4 HDMI MHL terminal
86. ed to edit favourite Add to My favourite list or remove from My favourite list The 9 mark will be added to or removed from the selected channel Move channel position in My B button favourite list favourite channel numbers will be sequentially allocated NOTE e f you delete a channel via the Manual adjust option Menu gt gt View setting gt Channel settings gt Programme setup gt Digital setting gt Manual adjust this will be deleted from both the CH list and My favourite list Selecting channels from favourite list 1 How to move between favourite list and CH list D Press the OK button when you watching DTV or SAT to bring up the CH list 2 Press the key and select My favourite list 2 Move up and down the displayed channel list by using the A V keys then press the OK button to select the desired channel NOTE e When watching your favourite channels via My favourite list you can directly select other favourite channel by entering the favourite channel number on the remote control e Selecting the EPG function while using My favourite channel list will only show details for the favourite channels you have added To view details of all available channels via the EPG please switch back to CH list mode from My favourite by following the steps shown 1 12 and reselect CH List bef
87. een display Other useful features ia Demo Sample SONG_01 mp3 305 SONG_02 mp3 3 15 SONG 03 mp3 3 02 SONG 04 mp3 6 05 SONG 05 mp3 4 52 SONG 06 3 6 35 SONG 01 3 SONG 07 mp3 2 10 SONG 08 mp3 3 26 SONG 09 mp3 3 56 SONG 10 mp3 1 01 0 14 3 05 This screen image is for the USB media mode It may be slightly different in the Home network mode Buttons for music mode When using USB media mode Buttons Description OK When selecting a music file Play music A V lt gt Cursor When music is being played Stop music When music is stopped Return to the previous screen Folder Return to the upper folder When the top folder is displayed return to the top menu screen Select deselect items v mark appears on the selected items All Stop music Folder Stop music and move to the top menu screen Y button Play pause music Display USB media menu e Set all auto play e DUMON e Reset all auto play e USB device removal The mode selected in Folder display setting NOTE e When there are invalid music files the mark will be displayed for the file The displayed play time may differ slightly from the actual play time depending on the files Select a desired item Buttons for file selecting operations When using USB media mode Buttons 7 Descripion oK When selecting a folder icon Enter this directory When s
88. electing a video file Play the video A V 4 Select a desired item Cursor Return to the previous screen Folder Return to the upper folder When the top folder is displayed return to the top menu screen Select deselect items mark appears on the selected items Gbutton Folder Move to the top menu screen Y button Play the video file from the top of the file Display USB media menu e Set all auto play e Reset auto play e USB device removal The mode selected in Folder display setting Buttons for playing mode When using USB media mode Buttons Desoripton 2 When video is being played Pause the video When video is paused Play the video Go to the beginning of a file by pressing A once Cursor and the previous file by pressing A twice V Cursor Go to the next file 3D 7 Swithbetween2Dand3Dmodes R button Start playback from the previously stopped scene Gbuton Stopavideo GB 57 Display USB media menu e Title edition e Chapter Show video information B button e USB device removal Jump to scenes at 10 increments 0 90 e Limited to files without chapters Reveal hide the guide display NOTE Reverse fast forward continues from one file to another during continuous playback Instead of pressing buttons on the remote control unit the operations above are also available on the screen
89. eletext NETFLIX button Display the Netflix screen See page 66 e Netflix is available in certain countries Unlimited membership required More information at www netflix com Quick guide Operation overview Follow the steps below one by one when using the TV Some steps may not be necessary depending on your TV installation and connection 1 Preparation Connecting the TV For 60 70 inch models For 80 inch models NOTE e The cable tie can be moved from to Place the TV close to the AC Q Plug the standard DIN45325 plug IEC 169 2 outlet and keep the power 75 Q coaxial cable e Connect the satellite antenna cable Product shape varies in some countries Insert a card into the slot to watch scrambled broadcasts Page 11 Plug in the AC cord 2 Preparation Setting the TV Press 1 on the TV Page 18 Run the initial auto installation Page 14 Language setting Home Store setting Country setting PIN setting B Channel search setting Digital search Terrestrial Cable Analogue search e Satellite search Start searching channels Congratulations Now you can watch TV f necessary adjust the antenna to attain maximum signal reception Page 17 Quick guide 3 Daily operation 4 Advanced features 5 Enjoy additional features P
90. enjoy the full 3D effect The 3D glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV If this occurs turn off the other 3D product or electronic devices or keep the devices as far away as possible from the 3D glasses Stop using this product in any of the following situations When images consistently appear doubled while you are wearing the 3D glasses When you have difficultly perceiving the 3D effect If the 3D glasses are faulty or damaged stop using them immediately Continued use of the 3D glasses may cause eye fatigue headaches and illness If you have any abnormal skin reaction stop using the 3D glasses In very rare instances such reactions may be due to an allergic reaction to the coating or materials used If your nose or temples become red or you experience any pain or itchiness stop using the 3D glasses Pressure caused by long periods of use may lead to such reactions and may result in skin irritation You may not be able to use several menu items while you are watching the TV in 3D mode You cannot use the 3D function in radio or data mode NOTE These 3D glasses are only for use with SHARP LCD TVs supporting 3D Enjoying 3D image viewing Display format for 3D and 2D images Image for input ms 2D gt 3D Converts normal 2D images into 3D images 3D mode Creates 3D images from 3D images displayed using the 3D Side by Side side by
91. er to Individual setting PIN Page 43 To reset the PIN setting PIN input will no longer be needed refer to Reset the PIN Page 78 This function is available only while browsing Net TV CAUTION e f you exercise this operation Net TV will be completely initialized If there is important information for you take notes before executing Enjoying 3D image viewing You can enjoy 3D supported images on this TV when you wear 3D glasses To produce 3D images liquid crystal shutters in the 3D glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV NOTE e Hefer to the operation manual for details regarding usage e Some menu items are greyed out in 3D mode This is not a malfunction Before using the 3D glasses Not all consumers can experience and enjoy 3D TV Some people suffer from stereo blindness which prevents them from perceiving the intended depth of 3D entertainment Also some people who watch 3D programming may experience initial feelings of motion sickness as they adjust to the picture Others may experience headaches eye fatigue or motion sickness Some viewers might also experience epileptic seizures Like a roller coaster the experience is not for everyone The 3D glasses are precision equipment Handle them with care Improper use of the 3D glasses or failure to follow these instructions can result in eye strain If you
92. erate fully at extreme high or low temperatures Please use them within the specified usage temperature range The product serial number is displayed on the 3D glasses as indicated in the illustration on the left The first three digits represent the date of manufacture Day of x manufacture 1 1 A 10 2 2 B 11 QS J 18 N 22 23 W 30 A 231 P Y ang Z are not used NOTE Please contact your local authority for the correct method of disposal of this product and or packing Troubleshooting 3D Images Possible solution e 3D images are not e Is 3D auto change set to Off Press 3D to switch to displayed 3D mode Page 75 If 3D auto change is set to Mode1 or Mode2 but no 3D images are displayed check the display format of the content being viewed Some 3D image signals may not be recognized as 3D images automatically Press 3D to select the appropriate display format for the 3D image Page 75 Is the power of the 3D glasses turned on Press the power button for at least 2 seconds to turn on the 3D glasses Are the 3D glasses set to 2D mode Press the power button for an amount of time that is less than 2 seconds to switch the 3D glasses to 3D mode Is there an obstacle between the 3D glasses and the TV or is something covering the receiver on the 3D glasses The 3D glasses operate by receiving a signal from the TV Do not place anything between the 3D emi
93. ertain jurisdictions e Letter Gothic is a trademark of The Monotype Corp and may be registered in certain jurisdictions iType is a trademark of Monotype Imaging Inc registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions e This product contains the iType font engine from Monotype Imaging Inc Disclaimers for services using the Internet DISCLAIMERS GB 82 This SHARP device facilitates the access to content and services provided by third parties The content and services accessible via this device belong to and may be proprietary to third parties Therefore any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider SHARP shall not be liable to you or any third party for your failure to abide by such authorization or terms of use Unless otherwise specifically authorized by the applicable content or service provider all third party content and services provided are for personal and non commercial use you may not modify copy distribute transmit display perform reproduce upload publish license create derivative works from transfer or sell in any manner or medium any content or services available via this device SHARP is not responsible nor liable for customer service related issues related to the third party content or services Any questions comments or service
94. ertified HDMI cable e Point the remote control unit toward the TV not to the connected HDMI device e Video noise may occur depending on the type of HDMI cable used Make sure to use a certified HDMI cable e Up to three HDMI recording devices one AV amplifier and three players can be connected using this system These operations affect the HDMI device selected as the current external source If the device does not operate turn on the device and select the appropriate external source using gt e When you insert remove HDMI cables or change connections turn on all connected HDMI devices before turning on the TV Confirm that picture and audio are correctly displayed output by selecting HDMI 1 HDMI 2 HDMI 3 HDMI 4 from the INPUT menu Regarding Select recording device Select the device for recording from connected devices NOTE e This function enables you to select either the USB HDD for USB recording use or the HDMI device with CEC protocol 1 Goto TV Menu gt Setup gt View setting gt Select recording device 2 Select the device for recording using the REC button on the remote control unit Select USB HDD when using the REC button for USB recording Select HDMI device when using the REC button for recording to the HDMI device 3 Press the Return to end the operation GB 30 AQUOS LINK AQUOS LINK connection
95. f from the Sleep timer the TV menu Page 39 Is No signal off or No operation off activated Page 39 e No picture e Are connections to external equipment correct Pages 26 31 5 the input signal type selected correctly after connection Page 46 Is the correct input source selected Page 18 Is a non compatible signal being input Page 61 Is the picture adjustment correct Pages 35 37 Is the antenna connected properly Page 9 Refer to Picture Audio test Page 79 GB 77 Appendix Reset the PIN 1 Goto TV Menu gt Setup 2 Press A V to select Auto installation Programme setup PIN Parental rating or Reset and then press OK The PIN input window will display Press and hold both and on the TV simultaneously until the message appears on the screen NOTE e When the PIN code is reset the default PIN code 1234 is set Reset If complex adjustments are made so that the settings cannot be restored to normal you can reset the settings to the factory preset values 1 Goto TV Menu gt Setup gt View setting gt Reset 2 Press lt p to select Yes and then press e Now TV will restart automatically OK displays on the screen 3 Press lt p to select Yes and then press OK Now initialising displays on the screen and blinks e After the reset has completed
96. f services NOTE e This application is not available when UK or Italy is selected for the country setting e HbbTV may not be displayed properly 3D mode e You need to perform Network setup to enjoy HbbTV application Please navigate gt Network setup Data service setting Set the HbbTV service starting settings Auto Manual Off Go to TV Menu gt Setup gt View setting gt Data service setting NOTE e f Data service setting is set to Auto the TV will load the Hbb TV pages automatically e To avoid automatic loading you can set to Manual or Off e Subtitles for teletext may not display when HbbTV service is started In such cases set to Off e Manual can be set only for Italy If the channel you are currently watching provides data service you can enjoy HbbTV content When Data service setting is set to Auto Press R to display the data service screen NOTE e After changing the channel please wait momentarily until HbbTV icon is displayed on the screen HbbTV 1 Press A W 4 P to select a desired option and then press OK The selected service will be started NOTE e Operations vary depending on the Hbb TV application e certain function appears on the screen you can use the offered function by pressing the colour buttons e Text can be inputted using the numbers
97. fer to following process 1 Goto TV Menu gt Setup gt Information gt Netflix help 2 Press lt gt to select Deactivate and then press OK Press lt p to select Yes and then press OK Updating your USB network Software update This function allows you to update to the latest software via a USB device or network o check the availability of the latest software versions visit http www sharp eu software download for links to the download pages for the appropriate countries 1 Goto TV Menu gt Setup gt Information gt Software update gt USB update e You can also update the software through the network Go to TV Menu gt Setup gt Information gt Software update gt Network update and follow the on screen instruction e A broadband connection and Network setup are required to update the software using the internet Pages 64 65 2 Press OK and then insert the USB device containing the software update file E CAUTION Be sure to insert the USB device correctly into the terminal 3 Press END to close the window when a screen prompt pops up 4 The TV displays a confirmation screen while checking the data in the inserted USB device GB 80 e f the data is not compatible with the system an error message appears on the screen Repeat steps 2
98. g device Pages 28 29 Audio device 7745 Connecting external devices Video connections HDMI connection Example of connectable devices DVD player recorder Blu ray player recorder Game console The HDMI connections permit digital video and audio transmission via a connection cable from a player recorder The digital picture and sound data are transmitted without data compression and therefore lose none of their quality Analogue digital conversion is no longer necessary in the connected devices which also would result in quality losses HDMI 1 m HET HDMI 2 Homi ARC HDMI 3 anf Huomii MHL HDMI 4 af 0 HDMI DC 5V 900mA HDMI 2 PC AUDIO L R a 23 5 mm stereo minijack cable commercially available DVI HDMI cable commercially available HDMI certified cable commercially available DVI HDMI conversion Using a DVI HDMI cable the digital video signals of a DVD can also be played via the compatible HDMI connection The sound must be fed in additionally e When connecting a DVI HDMI cable to the HDMI terminal the image may not come in Clearly e Both HDMI and DVI use the same HDCP copy protection method When using the HDMI 2 terminal You must set the audio signal input source depending on the type of HDMI cable connected refer to page 46 for details HDMI certifi
99. glasses to clean the lenses Remove dust and soil from the cloth Any dust or other soiling on the cloth may result in scratches Do not use solvents such as benzene or thinners as doing so may damage the coating e When cleaning the 3D glasses take care not to allow water or other fluids to come into contact with the glasses e Always store the 3D glasses in the case provided when not in use e When storing the 3D glasses avoid very humid or hot locations Viewing 3D images f you experience dizziness nausea or other discomfort while viewing 3D images discontinue use and rest your eyes Do not use the 3D glasses if they are cracked or broken Introduction Supplied accessories Remote control unit x 1 size battery x 2 Co Pages 6 and 8 Page 6 Stand unit x 1 299 000 99 99 80 60 70 inch models inch models Page 5 3D glasses AC cord x 1 x 2 For 80 inch models only Page 67 Page 9 Initial setup guide Important safety printed document precautions printed document Optional accessories The listed optional accessories are available for this LCD colour TV Please purchase them at your nearest shop e Additional optional accessories may be available in the near future When purchasing please read the newest catalogue for compatibility and check the availability No Patname mber NS number 4 Wall mount bracket AN 52AGA Th
100. hen connecting devices to the HDMI 2 terminal or the PC does not operate e Are batteries worn out Replace with new batteries terminal Pages 28 29 and 46 Are you using it under strong or fluorescent lighting Refer to Picture Audio test Page 79 e Isa light illuminating to the remote control TV sometimes This is not a malfunction This happens when the cabinet Ser makes a cracking slightly expands and contracts according to changes in e Picture is cut off e 5 the image position correct sound temperature This does not affect the TV s performance Are screen mode adjustments Wide mode such as picture e Net TV start page s the ETHERNET cable connected correctly Page 64 size made correctly Pages 45 58 and 59 cannot be displayed Check the settings of Network setup Pages 64 65 Strange colour Adjust the picture tone Some Internet The TV has only limited functions compared with regular PC light colour or dark e s the room too bright The picture may look dark in a room functions used on a browsers Page 66 colour or colour that is too bright PC are not available misalignment Check the Colour system setting Pages 42 and 47 from the TV Power is suddenly e The TV s internal temperature has increased Remove any Miracast image audio Check pairing turned off objects blocking the vent or clean cannot be output to 5 the Sleep timer set Select Of
101. hide hidden information such as an answer to a quiz Hold automatically or release the hold mode Display the subtitle or exit the subtitle screen e Subtitles will not be displayed when the service does not contain subtitle information Reveal or hide subpages e Move to the previous subpage Subpage Move to the following subpage G e These two buttons are shown on the screen by the symbols and Display the top menu e he top menu will not be displayed when the service does not support top menus Subtitle for teletext GB 24 Watching TV W um la m i P a 2 I9 L Sw x 4 Pw hw EE ww GE 9 EE ww a Ww B BN d Some services bring you programmes with the application encoded letting you experience DTV interactively When provided the MHEG 5 application will start when you press NOTE e MHEG may not be displayed properly in 3D mode You can view some MHEG 5 content even if you do not perform Network setup Furthermore Network setup allows you to view additional content such as interactive content from gt Network setup e You cannot view MHEG 5 content when MHEG 5 content is not broadcast even if you perform the appropriate Network setup Carefully check the broadcast programme If the channel you are currently watching provides HbbTV service you can enjoy a variety o
102. how even when Data source is set to USB e The factory default for this item is Watch Set to Off If only a single still image is stored in SD SDHC USB the USB device or SD memory card that image will be displayed as the elapsed If you do not want to use the wallpaper as described images in the memory all the images above set Quick start to or Off The still images will be displayed until the set time has if you do not want the LED to illuminate e The LED is illuminated in white for 2D mode e The LED is illuminated in blue for 3D mode wallpaper When there are multiple still will be displayed in a slideshow o Quick start NOTE o Boot picture e Images are displayed as a slideshow in 3 minute You can reduce the TV s start up time after turning pier With this function activated the SHARP logo will be on the power with the remote control unit As a USB device or SD memory card cannot be displayed when you turn on the TV Go to TV Menu gt gt Option gt Quick detected immediately after the TV is turned on from NOTE start standby mode the wallpaper pre installed in the TV This function is not available when the Quick Start is may be displayed even when Data source is set to SD USB To display the SD USB Wallpaper turn on The TV quickly starts up from standby the power and wait 10 seconds before turning off the A
103. ide show operation When using USB media mode Buttons Description Return to the previous operation 8900 Switch between 2D and 3D modes Display USB media menu e Select slide show interval e Wide mode e USB device removal Reveal hide the guide display am Change the size of photo NOTE e The selected BGMs are played repeatedly The slide show continues until you press e Depending on the photo the slide show interval per photo may be longer than the interval selected in the settings When music is being played Stop music When music is stopped 5 All Return to the thumbnail selection screen Folder Return to the upper folder When the top folder is displayed return to the thumbnail selection screen B button 6B 56 Selecting the picture size for photo mode You can select the picture size in Photo mode 1 Select Photo mode e Refer to Selecting modes and drives servers page 55 2 Press 9 e The Wide mode menu displays 3 Press or A to select the desired item As you toggle the options each is inmediately reflected on the screen There is no need to press OK EXAMPLE Keeps the original aspect ratio in a full screen display Original Keeps the original aspect ratio and size NOTE e For Original item if the photo size is larger than 3840 x 2160 vertically or horizontally the original aspect ratio is kept in full scr
104. ings on the PC to match the TV s communications conditions The TV s communications settings are as follows 9 600 bps Data length Parity bit S Flow control Communication procedure Send the control commands from the PC via the HS 232C connector The TV operates according to the received command and sends a response message to the PC Do not send multiple commands at the same time Wait until the PC receives the OK response before sending the next command Make sure to send A with the carriage return and confirm that ERR returns before operating GB 62 Command format Eight ASCII codes Command four digits Command The text of four characters Parameter four digits Parameter 0 9 blank minus Return code Parameter Input the parameter values aligning left and fill with blank s for the remainder be sure that four values are input for the parameter When the input parameter is not within an adjustable range ERR returns refer to Response code format When 2 is input for some commands the present setting value responds Response code format Normal response Problem response communication error or incorrect command GS Return code ODH e a Return code Connecting a PC Command list E COMMAND PARAMETER CONTROL CONTENTS POWER W POWER OFF SETTING STANDBY INP
105. itial auto installation uod praed vict 14 b irem a 18 Daily OperatiON 18 Favourite Channel Information 20 Operator profile 20 zc EN 21 WONTON 24 Connecting external devices 26 Introduction to 26 Video ar rau aepo nodus uA 27 Audio 29 AQUOS 30 Controlling HDMI devices using AQUOS LINK 30 AQUOS LINK connection eese 31 AQUOS LINK setup eese 32 Operating an AQUOS LINK device 32 Using a Smartphone with the TV 34 Basic 1 1 222 35 Picture SUING erc 35 Audio SCMINGS i caeso 38 Power save settings 39 VIEW SENOS 40 Individual setting 43 Individual setting 22 2 43 Individual setting Language 44 Useful viewing functions
106. ive earthing of the building installation through the MAINS connection or through other devices with a connection to protective earthing and to a television distribution system using coaxial cable may in some circumstances create a fire hazard Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a certain frequency range galvanic isolator see EN 60728 1 1 NOTE e For requirements in Norway and Sweden the requirements for isolation are also relevant for devices that can be connected to television distribution systems Trademarks The terms HDMI and HDMI High Definition Multimedia Interface and the Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries e Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories The HD TV 1080p Logo is a trademark of DIGITALEUROPE The DVB logo is the registered trademark of the Digital Video Broadcasting DVB project hk LCFONT 22 77 7h and LC logo mark are registered trademarks of SHARP Corporation This product is embedded with LC Font technology which was developed by SHARP Corporation for clearly displaying easy to read characters on an LCD screen However other non LCD fonts are used for displaying some screen pages e DivX DivX Certified DivX Plus
107. k Basic adjustment Power save settings Go to TV Menu gt Setup gt ECO a Back 2 LI Ee picture control Energy save Off No signal off Disable operation off Disable 6 picture control This function automatically detects the image source and decreases the power consumption while keeping the brightness of the image unchanged NOTE e his function does not work when AV mode is set to DYNAMIC Fixed DYNAMIC or AUTO e This function does not work when Energy save is set to Standard or Advanced e This function is greyed out in 3D mode Emegysmwe 0 74 This function enables you to reduce the backlight brightness in order to decrease the power consumption and increase the backlight life span as shown in the following table Standard Reduces the backlight brightness Reduces the backlight brightness more than Standard The backlight brightness is the same value of your settings in the selected AV mode NOTE e This function does not work when AV mode is set to DYNAMIC Fixed e This function does not work when 3D brightness boost is set to High or Low Energy save status icons lon Description 00 Energy save is set to Standard Energy save is set to Advanced When Energy save is set to Standa
108. k immediate medical attention Do not disassemble e Do not disassemble or modify the 3D glasses except when recycling the batteries Do not modify the 3D glasses Caution for lithium battery Batteries must not be exposed to excessive heat such as direct sunlight or fire Replace only with the same or equivalent type of battery The battery may explode if improperly replaced e Take care not to reverse the battery poles and when loading the battery Follow the correct procedure when loading the battery Loading the battery incorrectly may damage the battery or cause it to leak battery fluid which could result in a fire injury or damage Handling the 3D glasses e Do not drop exert pressure on or step on the 3D glasses Doing so may damage the glass section which may result in injury e Be careful not to trap your finger in the hinge section of the 3D glasses Doing so may result in injury Pay special attention when children are using this product Using the 3D glasses he 3D glasses vision should be limited Security advisory establishes a maximum of 3 hours visualization and in any case no more than one show length break included Use the 3D glasses only for the specified purpose Do not move around while wearing the 3D glasses The surrounding area appears dark which may result in falling or other accidents that may cause injury Caring for the 3D glasses e Use only the cloth provided with the 3D
109. l on the TV At least USB HDDs with memory between 100GB Channel display during USB recording operations and 2TB and under are required for USB recording to register e Some USB HDDs such as ones which have multiple drives etc cannot be used for USB recording Release USB recording when receiving pwe an AQUOS LINK or a Euro SCART Device format Channel information displays by pressing i on the Go to TV Menu gt Setup gt View setting gt remote control unit USB REC setting Auto input selection BBC ONE DTV City Hospital 11 00 12 00 compatible signal Switch input source automatically You can format all data on the USB HDD USB recording continues to work Go to TV Menu gt Setup gt View setting gt The TV does not switch input source USB REC setting gt Device format Disable automatically even when receiving NOTE Audio ENG STEREO Video 576i Subtitle Off gt gt New information an AQUOS LINK or a Euro SCART Q The recording icon shows up when REC is compatible signal e 2 has been completed data cannot be pressed and the TV is recording the programme status icon shows up depending on what is shown on the screen 54 Other useful features SD USB media Home network SD USB media Home network DLNA In both modes you can enjoy viewing photos listening to music and watching vi
110. liance Security Static WEP 64 128 bit key index 1 only Wi Fi Protected Setup certification programme from the Wi Fi Alliance WPA PSK wireless LAN connection and performance cannot be guaranteed for all residential WPA2 PSK AES enviroments in the following cases the wireless LAN signal may be poor or drop or the Modulation DBPSK 1 Mbps connection speed may become slower DQPSK 2 Mbps When used in buildings made with concrete reinforced steel or metal CCKQ5 5 11 Mbps When placed near objects that obstruct the signal BPSK 6 9 Mbps When used with other wireless devices that emit the same frecuency QPSK 12 18 Mbps When used in the vicinity of microwave ovens and other devices that emit a magnetic 16 QAMQ24 36 Mbps field electrostatic charge or electromagnetic interference 64 QAM 48 54 Mbps When there is significant interference in the 2 4 GHz frequency such as from other wireless LAN devices Bluetooth devices 2 4 GHz cordless telephones and Specifications Bluetooth microwave ovens it is recommended that you use a wireless LAN access point that N supports IEEE802 11a n 5 GHz and set the access point to transmit at 5 GHz For Ver name Bluetooth uad setup details see the operation manual of your access point x Before transferring to a third party or disposal be sure to initialize the wireless LAN Profile name A2DP SNK SRC HID settings e Wireless LAN supports WEP64 WEP128 TKIP and A
111. mat for viewing News weather and sports information stock exchange prices and programme previews are among the many services available Turning teletext on off 1 Select a TV channel or external source providing a teletext programme 2 Press to display the teletext e Many stations use the TOP operating system while some use FLOF e g CNN Your TV supports both these systems The pages are divided into topic groups and topics After switching on the teletext up to 2 000 pages are stored for fast access f you select a programme with no teletext signal Teletext available displays e he same message displays during other modes if no teletext signal is available TELETEXT e Each time you press E the screen switches as shown above Press again to display the teletext on the right screen and the normal image on the left screen NOTE Teletext will not work if the selected signal type is RGB Page 46 Teletext will not work in 3D mode Buttons for teletext operations Buttons Description PA V Increase or decrease the page number Numeric Directly select any page from 100 to buttons 0 9 899 by using the 0 9 numeric buttons Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding colour R G Y B on the remote control unit Reveal hidden teletext Freeze Stop updating teletext pages Reveal or
112. ng HDMI devices using AQUOS LINK What is AQUOS LINK Using the HDMI CEC protocol with AQUOS LINK you can interactively operate compatible system devices AV amplifier DVD player recorder Blu ray player recorder using a single remote control unit NOTE e AQUOS LINK compatible AQUOS AUDIO speaker system and AQUOS recorder are scheduled to be on sale after the release of this TV AQUOS LINK does not work while using USB recording functions What you can do with AQUOS LINK One touch recording DTV SAT only You do not have to search for the remote control unit of your recording device Press the REC or REC STOP lll buttons to start stop recording what you see on the recorder One touch play When the TV is in standby mode it will automatically turn on and play back the image from the HDMI source Single remote control operation AQUOS LINK automatically recognises connected HDMI devices and you can control the TV and the devices as if using a universal remote control unit Operating title list of external devices In addition to displaying the TV s own timer list Page 22 you can also call up the external player s top menu or AQUOS BD player s AQUOS recorder s title list provided that the devices support AQUOS LINK Multiple control of HDMI devices You can select which HDMI device to operate using the Link operation menu NOTE e When you use AQUOS LINK make sure to use a c
113. ning at high volume levels Do not display a still picture for a long time as this could cause an afterimage to remain e here is power consumption always if main plug is connected e Servicing Do not attempt to service the product yourself Removing covers can expose you to high voltage and other dangerous conditions Request a qualified person to perform servicing The LCD panel is a very high technology product giving you fine picture details Due to the very large number of pixels occasionally a few non active pixels may appear on the screen as a fixed point of blue green red or yellow This is within product specifications and does not constitute a fault Precautions when transporting the TV When transporting the TV never carry it by putting pressure onto the display Be sure to always carry the TV by two or more people 80 inch three or more people holding it with two hands one hand on each side of the TV Caring for the cabinet Use a soft cloth cotton flannel etc and gently wipe the surface of the cabinet e Using a chemical cloth wet dry sheet type cloth etc may deform the components of the main unit cabinet or cause cracking Wiping with a hard cloth or using strong force may scratch the surface of the cabinet e f the cabinet is very dirty wipe with a soft cloth cotton flannel etc soaked in neutral detergent diluted with water and thoroughly wrung out and then wipe with a soft dry
114. nt to connect Keyboard device When pairing operation between keyboard and TV is completed enter the PIN code by using the keyboard device Mouse device When pairing operation between mouse and TV is completed the name will be displayed then press OK Audio input device 1 Change input source to Bluetooth by pressing gt 2 n Bluetooth device smartphone tablet enable Bluetooth function The device starts to search Bluetooth standby TV 3 V name will be shown in Bluetooth device then select it NOTE e See also the instruction manual supplied with the Bluetooth device You can register up to 6 devices to the TV but only one keyboard mouse and audio input device can be used at a time If a device for which Selected is displayed does not operate properly try searching and selecting the device again e The keyboard or mouse may not operate properly depending on the application being used e he Bluetooth device may not operate properly depending on the device being used Useful viewing functions MIRACAST By Miracast technology you can enjoy the contents of Miracast compatible smartphone or tablet to this TV Using the Miracast device When you connect a device such as a Miracast compatible smartphone or tablet to this TV you can enjoy video and audio from the device on the TV s large screen and speakers 1 Switch the TV input to Miracast 2 Enable the Miracas
115. o perform settings for the TV The OSD for the settings is called Menu The Menu enables various settings and adjustments Display the Menu screen Q Go to TV Menu e You can also display the Menu screen via the HOME menu screen Page 12 Selecting in the Menu Press 4 to select the desired menu and then press OK Press to return to the previous menu category Press lt P gt to select the desired sub menu and then press OK Press A F to select the item you want to Char Set Selecting options Press A V or lt gt to configure the control for improving TV viewing and then press OK EXAMPLE 3 _ 4 select adjust and then press acklig 5 Cursor Left T Mihi Back 1 Char Set 6 E Picture Changes character set into the alphabet numbers symbols etc 7 2 Caps 2 OPC Changes characters to capital lower case Qs 3 Done 8 3 16 dA Refer to the guide display below the menu bar to see 4 Cancel when to press the OK button Abort input and close 9 About the guide display the software keyboard The guide display below the menu bar shows 5 2 Colour uttons operations for the OSD he bar above is an operational guide for the remote control unit The bar will change in accordance with each menu setting screen NOTE e Menu options differ according to the
116. o start downloading from a TV NOTE Individual setting gt Standby search gt station will be displayed Download information e Terminals which can be tested Download setup may be displayed together with the confirmation HDMI component composite SCART DVI D sub Searchinpforupdates message e External speakers cannot be tested This function is 2 Follow the screen prompts available for the TV speakers only Perform a test for picture display When external equipment is connected but the picture is not displayed the test will be performed All countries except UK Sweden Finland and Italy are set to No for this function mE Starts downloading immediately The TV automatically determines whether a new It takes approximately one hour to software version is available when the TV is in update You cannot carry out other standby mode operations while downloading e Cancels the download by pressing OK on the remote control unit when Discontinue is displayed on the screen during the update Automatically searches for new Yes software updates available when the TV is in standby mode Perform a test for audio playback When external equipment is connected but the audio does playback the test will be performed Does not perform downloading The download will start at the date and time for the S scheduled download Turn on the power of the TV Message list Does not
117. ones Overwhelming sound may damage your hearing NOTE f you select Audio out when a cable is inserted in the HDMI 2 PC AUDIO L R terminal the TV speakers are muted e When you select Audio out you can adjust the TV sound volume with the 1 buttons Headphone out setting You can select the headphone speaker audio output when using the headphones Go to TV Menu gt Setup gt Option gt Terminal setting gt Headphone out setting Headphone Audio output from headphones only Headphone Audio out Audio output from headphones and speakers NOTE e This function does not work when Change audio output device Page 33 is set to By AQUOS audio SP or Headphone Audio out select is set to Audio out e Regarding the volume adjustment when Dual is set Adjust the speaker volume with the buttons on the remote control unit Adjust the headphone volume with the buttons on the TV The headphone volume is not muted even by pressing Mute button on the remote control unit e When not using the headphones Audio outputs from the speakers regardless of the settings Colour system You can change the colour system to one that is compatible with the image on the screen Go to TV Menu gt Setup gt Option gt Colour system NOTE e The factory preset value is Auto e f
118. or be selectable depending on the country setting or cable provider selection 5 Setting the PIN CD Press lt p gt to select Yes and then press OK e When No is selected the PIN code setting is skipped 2 Enter a four digit number as a PIN using the 0 9 buttons 3 Enter the same four digit number as step 2 to confirm 4 Press OK NOTE When France or Italy is selected in the country setting the PIN code setting cannot be skipped e 0000 cannot be set as the PIN code e When the PIN code setting is skipped the default PIN code 1234 will automatically be set e To change the PIN setting refer to Individual setting PIN Page 43 To reset the PIN setting PIN input will no longer be needed refer to Reset the PIN Page 78 6 Starting channel search Digital search Analogue search Satellite search Press to select Digital search Analogue search or Satellite search and then press OK e After performing Digital search or Analogue search the screen switches to the Satellite search setting You should then execute Yes if you want to search for satellite channels To watch both digital broadcasts and analogue broadcasts you should perform Digital search or Analogue search from Auto installation under the Setup menu Page 40 When you select Satellite search only satellite broadcasts will be searched If you want to sear
119. or the first time after purchase the initial auto installation wizard appears Follow the menus and make the necessary settings one after another Confirm the following before turning on the power Is the antenna cable connected Is the cord plugged in 1 Press b on the TV e The initial auto installation wizard appears 2 Setting the OSD language Press A W lt p to select the desired language and then press OK 3 Selecting the location of the TV Press lt p to select where you will use this TV and then press OK e he confirmation screen pops up only when selecting STORE Press lt p gt to select Yes or HOME STANDARD will be the default value for the AV mode setting STORE DYNAMIC Fixed will be the default value for the AV mode setting If the AV mode is changed the TV will automatically switch back to DYNAMIC Fixed when there is no operation using the TV or remote control unit for 30 minutes STORE A demonstration image will be displayed after initial auto installation is completed If you have chosen STORE by mistake go to TV Menu gt Setup gt View setting gt Reset gt select HOME again 4 Setting the country Press lt p to select your country or area and then press OK e This setting screen only appears during the initial auto installation NOTE e Some functions may not display
120. ore pressing the EPG button GB 20 Operator profile In case your CI Plus CAM supports Operator Profile your CAM will inform you and guide you through the Operator Profile installation When operator s profile is added by the CAM it will be displayed in the CH list menu Each profile will be stored as an independent list in the TV You can delete operator profile you added Go to TV Menu gt gt View setting gt Channel settings gt Programme setup gt Operator profile management NOTE e he TV supports 2 operator profiles e Operator profile can have mixed services such as T C 51 52 53 54 but will only be displayed based on the network and media type you select Watching TV EPG EPG is a programme list that is displayed on the Genre icon setup screen With the EPG you can check the schedule You can grey out or place a mark on desired genres for DIV SAT RADIO DATA view detailed information and smoothly search for programmes you frequently about them and tune to an event currently on air watch Useful settings for using EPG 1 Goto TV Menu gt Setup gt Option gt EPG setup gt Genre icon setup 2 Press A V to select the desired genre and then press OK Genre icon list If you want to use the EPG for digital stations captured while the TV is in standby mode After setting to Yes it may take some time to turn off the power
121. ower is still consumed even when the TV is turned off Once the connection is made press gt to display the INPUT screen and then press gt A V to switch over to the appropriate external source with Watching digital broadcasts Watching analogue broadcasts DTV SAT RADIO DTV SAT RADIO OK Watching satellite broadcasts DTV SAT RADIO NOTE NOTE e You can also select an external video source from HOME gt Input change e Only HDMI inputs which are not set for Input skip Page 46 and properly connected inputs can be selected e f multiple satellite services are set each time you press the SAT button the channel switches as follows SATA A SATS With With 0 9 3 V Watching TV DTV SAT mode If multi sound modes are received each time you press 271 the mode switches as follows Audio ENG STEREO UR EX R LR Audio ENG CHB Audio ENG Press lt gt to select L or R sound when the STEREO or DUAL MONO screen is displayed Audio ENG STEREO L R L R LR NOTE e The sound mode screen disappears in six seconds e Selectable items vary depending on the received broadcasts e When the Audio description setting menu is set to On the audio description sound is selected depending on the main audio ATV mode Each time you press 151 the mo
122. peaker system function may not be available Press A V to select AQUOS SP and then press OK If your recorder has multiple storage media select the media type here You can manually change the AQUOS AUDIO 1 Press to select Media change and then speaker system s sound mode press OK 1 Press A F to select Sound mode change 2 Select the desired medium such as DVD 2 sound mode changes every time you press recorder or HDD The media type changes every OK time you press OK e Refer to the operation manual of the AQUOS AUDIO speaker system for details AQUOS LINK Using a Smartphone with the TV This function enables you to connect the TV to a smartphone that supports Mobile High Definition Link MHL using an MHL compatible cable To connect the TV to your MHL compatible smartphone be sure to use an MHL compatible cable commercially available e You can view pictures and video on a large screen e You can play back music files MHL compatible cable NOTE An MHL compatible portable device is required to use this function Connect the device to the HDMI 4 terminal e his product incorporates MHL 1 4 Homi DC 5V 900mA HDMI 4 terminal Rear side GB 34 TVO feJ em P INFO Cc ccc DTV SAT RADIO AVMODE APP Cc II II Co Co ux C g amp
123. r high definition picture quality Adjusts effect to reduce judder from film contents You can select desired level of judder reduction from O to 10 Plays back images with equal display time for each frame reproducing movie theatre experience oft 7 Normal viewing mode Automatically adjusts the contrast of an image according to the scene Advanced Standard e Active contrast is not available case of 4K input Standard DNR produces a clearer image Auto High Middle Low his function may not be available depending on the input signal type The brightness level range of the OPC sensor s automatic adjustments can be set according to your preferences The adjustment range of the OPC sensor be set to a maximum of 16 and a minimum of 16 NOTE This function is available only when the setting is set to or On Display e The maximum setting cannot be set to a smaller number than the minimum setting e he minimum setting cannot be set to a bigger number than the maximum setting e he maximum and minimum settings cannot be set to the same number Depending on the brightness of the surrounding light the OPC sensor might not operate if the adjustment range is small Basic adjustment Audio settings Go to TV Menu gt Setup gt Audio va
124. r the PIN code displayed on the TV When the connection is made device screen will be displayed in the TV If connection is not established the next message will appear Connection failed Please repeat procedure Connection Mode Setting Configures Wireless Channel settings NOTE e Depending on the connected device different channels may be assigned Other useful features USB recording You can enjoy DTV SAT recording or playback by connecting a commercially available USB HDD to the TV e USB recording does not work for ATV external inputs data broadcasts radio broadcasts or network applications Connecting a USB HDD Connect a commercially available USB HDD to the USB port of the TV e USB storage device USB HDD e Be sure to read the operation manual for the USB HDD e At least USB HDDs with memory between 100GB and 2TB and under are required for USB recording to register e he USB 2 HDD port is compatible with portable USB HDD which can operate with the power supply from the USB port bus powered drive Refer to Disconnect the USB HDD when removing the USB HDD do not remove the USB HDD during USB recording operation bt De NOTE e USB recording may take a few moments to start after the TV is turned on e his function may not work properly for some USB HDDs e Do not connect and disconn
125. rd or Advanced Energy save status icons appear in the Picture menu and channel information windows 6 No signal off When set to Enable the TV will automatically enter standby mode if there is no signal input for 15 minutes NOTE e Even if a TV programme finishes this function may not operate because of interference from other TV stations or other signals GB 39 w No operation off The TV will automatically enter standby mode if no operations are performed in three hours if Enable is selected NOTE e Five minutes before the TV enters standby mode the remaining time displays every minute w Sleep timer Allows you to set a time when the TV automatically enters standby mode You can set the time span for entering standby mode after selecting Change NOTE Select Off to cancel the sleep timer When the time has been set countdown automatically starts e Five minutes before the preset of time expires the remaining time displays each minute Basic adjustment View settings Go to TV Menu gt Setup gt View setting 3 ISIN Back gu 7 E he iy Wy gt View setting Auto installation Channel settings Network setup Select recording device O Auto installation The TV automatically detects and stores all available services in your area This function also allows you
126. rd screw specifications with the product We recommend you to contact qualified service peronnel when Do not use screws that are longer than the standard length Screws that are too long installing it SHARP is not responsible for any damage to the product or injury to 22 4 2 aie yourse or otners N you Choose TO Install ine Wall MOUNTON your Wn the product to fall leading to personal injury SHARP is not liable for these kinds of CAUTION accidents nstall your wall mount on a solid wall perpendicular to the floor When you want SHARP is not liable for product damage or personal injury when a non VESA or non to attach the wall mount to surfaces other than plaster board please contact your specified wall mount is used or the consumer fails to follow the product installation nearest retailer adviser for additional information If you install the TV on a ceiling instructions or slanted wall it may fall and result in severe personal injury Always have three or more people to mount the TV on a wall Do not install the wall mount kit while your TV is turned on It may Wall mount kit specifications result in personal injury due to electric shock Standard dimensions for wall mount kits are shown below Fi WALL SEN NUM R M5 WALL MOUNT KIT WALL MOUNT KIT Wall mount audio setup When you mount the TV on a wall you can adjust the sound to a more suitable one by setting this function to Yes
127. ree space around the device for best performance e Make sure the firewalls in your network allows access to the TV wireless connection e Operations cannot be guaranteed when used with access points that do not have Wi Fi certification e A wireless LAN access point is required to connect the TV to the Internet using a wireless LAN See the operation manual of your access point for setup 1 2 owitch on your router before starting the network installation Go to Network setup Auto setup and then press OK NOTE e Follow the on screen instructions when setting manually Go to Network setup Manual setup Press A V to select Wireless and then press OK Confirm the WPS location and then press OK to go to the next step Perform Connection test after the connection is completed Press 4 gt to select Yes and then press OK The connection test result will be displayed on the screen Follow the on screen instructions for the settings after this step 68 65 NOTE When not using Push button perform the settings from Network setup gt Manual setup gt Connection type To connect your TV to the internet you must have a broadband internet connection If you do not have a broadband internet connection consult the store where you purchased your TV or ask your internet service provider or telephone company There is no need to enter the security key for subsequent connec
128. reen is running END ATV DTV SAT Exit the Menu screen AQUOS Return to the start page CONTROL Pages 52 54 and 57 Display a panel to operate some functions on the screen Display information Page 19 Display the station information channel number signal etc on the screen P INFO Display programme information transmitted through digital video broadcasting DTV SAT only gt INPUT Page 18 Select an input source Standard Advanced Off Page 39 Select Energy save setting 18 19 20 21 22 23 24 25 Teletext Page 24 ATV Display analogue teletext DTV SAT Select MHEG 5 or teletext for DTV SAT PA V ATV DTV SAT Select the TV channel AQUOS Scrolls pages up down MENU Menu screen on off Page 13 EPG Pages 21 23 DTV SAT Display the EPG screen Return ATV DTV SAT Return to the previous screen AQUOS Return to the previous page This may not function for some services Buttons for useful operations Subtitle Pages 24 and 44 Switch subtitle languages on off Reveal hidden teletext Page 24 Subpage Page 24 Freeze Hold Page 24 Freeze a moving image on the screen Teletext Stop updating teletext pages automatically or release the hold mode R G Y B Colour buttons The coloured buttons are correspondingly used to select the coloured items on the screen e g EPG 5 t
129. rksat Additional search Use this menu to add new services automatically after auto installation has been completed Follow steps 1 to 2 in the right column on page 16 Manual search Normal Add new services within a specified frequency band After setting the items on the following screen select Yes from Search start menu Special Use this option only when no channels can found by Normal Vert Low Frequency Vert Low Vert High Symbol rate Search start Horiz Low Horiz High Manual adjust This function is the same as in Digital setting Refer to Manual adjust in Digital setting Basic adjustment Analogue setting You can reconfigure the analogue TV channels settings automatically or manually Additional search Use this menu to add new services automatically after Analogue search in the Auto installation menu has been completed e Start searching channels after selecting the colour system and sound system Manual adjust Use this menu to set up analogue TV channels manually After selecting Yes on the screen press 4 to select the channel you want to set and then press OK Fine You can adjust the frequency to the desired position NOTE e Adjust while checking the background picture as a reference e You can set by directly entering the frequency number of the channel with 0 9 numeric buttons EXAMPLE e 179 25 MHz
130. round 15 W or more of power power consumption is required during e When in the wallpaper function do not perform any standby OAD operations or EPG searches The TV enters wallpaper mode when in timer set for recording or watching a programme will On Wallpaper standby condition take priority 2 minutes before the programme starts or standby set to On GB 48 Useful viewing functions o Game play time This function allows you to display the elapsed time on the screen when mode is set to GAME Go to TV Menu gt Setup gt Option gt Game play time Under connecting a game console to the TV the elapsed time is displayed in 30 minute increments after you start playing a game Off J Hides the time NOTE e his menu can be selected in the case of the following input sources 1 3 HDMI1 4 Key lock This function allows you to lock the buttons on the TV or remote control unit in order to prohibit children from changing the channel or volume Go to TV Menu gt Setup gt Option gt Key lock Unlocks the buttons RC control lock Locks all buttons on the remote control unit Button control Locks the buttons on the TV except lock the power switch NOTE You cannot set both RC control lock and Button control lock at the same time Cancelling the lock Press MENU on the TV and
131. rt frequency 47 0 2 Press or Network ID None 0 9 to select or input the appropriate item value and then press OK Symbol rate 1 6875 6900 QAM modulation 1 64 Symbol rate 2 QAM modulation 2 256 Reset Search start 3 Press to select Search start and then press OK 4 Press lt p gt to select Yes to start searching cable broadcasts and then press OK 5 The searches for sorts and stores all the receivable TV stations according to their settings and the connected antenna abort the initial auto installation in progress press After searching for cable channels the screen switches to the Satellite search setting Page 16 Selectable items Description Scrambled stations opecifies if you need to add pay Yes No TV services Specifies how Channel you cede for channels Search method Specifies the Symbol rate 1 the value received for 1 Symbol rate 2 CATV 4 QAM 16 32 64 128 modulation 1 256 QAM None 16 32 64 modulation 2 128 256 1000 9000 1 Set up Symbol rate 2 if the cable provider uses several symbol rates 2 Details about the Search method items are as follows Channel Extracts all information from a channel quick but needs corresponding TV stations Frequency Checks every frequency in range slow Quick All services are searched by one frequency Thi
132. s contact the contracted service provider Recording CAM PIN setting When a CAM PIN code is required for recording a programme it is necessary to enter the CAM PIN code in advance 1 Goto TV Menu gt Setup gt Option gt Cl setting gt Recording CAM PIN setting 2 Enter the CAM PIN code NOTE e f a PIN code is not entered or is entered incorrectly the programme will not be able to be recorded played back GB 11 plus 1 3 Standard CI Plus is an advanced development of the DVB Common Interface Standard 1 Regarding security There are some regulations in recording functions The playback of encrypted programmes is strongly dependent on which CA module is used The playback of encrypted recordings may sometimes not be possible or only during limited time Programme providers who use the Cl Plus standard can assign different rights for their broadcast programmes Exercise caution when using USB recording to record broadcast programmes Pages 51 54 2 Operator service list management Operator profile Under the 1 3 specification the CAM may provide the channel listing parameters channel number frequency etc and these can be updated while in use Refer to Operator profile on page 20 Quick guide Using the HOME screen You can easily launch this HOME screen to enjoy Internet connection and Tips Home network functions and to perform setting
133. s for the TV ips HOME menu contents Main information 10 08 19 Nov 2012 display zone Featured and 1 Display the HOME screen recommended function zone Press HOME and the screen will be displayed 2 Select an item Other function icons 1 Press 4 4 9 to select the desired service or menu and then press Main information display zone See the right column for details on the operations in the HOME screen Various information including the time currently displayed programming and current setting status are shown Switching between the current setting status can be done using the coloured buttons 3 Exit the HOME screen Featured and recommended function zone Availabl functi h The operation will exit the HOME screen if you press f HOME before it is completed Other function icons Other function icons are shown In this manual the following expression is often used in order to simplify instructions e Go to TV Menu gt Setup gt This indicates how to navigate through the Menu screen using the lt gt and OK buttons screens This product is embedded with LC Font technology which was developed Regarding the instructions in the manual LCFONT by SHARP Corporation for clearly displaying easy to read characters on LCD Quick guide Using the Menu screen You need to call up the OSD t
134. s menu works only when your cable provider provides the frequency and the network ID e g Homing channel When Quick is selected Scrambled stations is automatically set to Yes and None for the Network ID menu cannot be selected 3 Set this to register only the specified network ID without registering any special services 4 The symbol rates are specified by the cable provider The TV searches for sorts and stores all the receivable TV stations according to their settings and the connected antenna To abort the initial auto installation in progress press gt After searching for analogue channels the screen switches to the Satellite search setting Page 16 Initial auto installation Searching for satellite broadcasts Single satellite setting Press A V to select Satellite search and then press OK Digital search Analogue search Satellite search e The antenna connection setting screen is displayed Single satellite 2 satellites on toneburst switchbox Max 4 satellites on DiSEqC multiswitch Communal satellite system NOTE e You can select the antenna connection method from the four types Consult your dealers before using a method other than Single satellite Press to select Single satellite and then press OK 2 Press A VW 4 9 to select your favorite satellite and then press OK ami 1 E
135. schedule Make changes in accordance with the on screen instructions e t is not possible to newly schedule a recording that overlaps with a timer setting that is currently running recording When urgent setting of a schedule is desired stop recording before scheduling A combined total of 16 timer settings Watch and Record can be set A CAM CI Plus v1 3 PIN code may be necessary to record broadcasts scrambled due to parental rate settings When a CAM PIN code is required for recording a programme it is necessary to enter the CAM PIN code in advance Page 11 If a CAM PIN code is not entered or is entered incorrectly the programme will not be able to be recorded played back You can select the programme you want to record and set the timer setting with EPG Pages 22 and 23 Manual timer setting enables you to set date recording start stop time and channel Press EPG Press B to display the timer list Press B again to display the Manual timer setting screen Set date recording start stop time and channel Press lt p gt to select Record and then press OK e A confirmation screen will be displayed for the timer setting Press lt p to select Yes and then press ah WN o When the TV cannot receive the time via digital broadcast perform Manual timer setting after setting the clock Go to TV Menu gt View setting gt Individual setting
136. search for update information Now 2 S ONEONE before the scheduled time for downloading or keep it in l l HE standby mode When new software is detected you can confirm the update information and download the software from NOTE li t e Updating the software may take some time bd Go to TV Menu Setup Information Message list NOTE e When the TV succeeds at downloading new software the message is updated in the Message list of the Information menu e he software update will not be carried out if there is no new software available at the specified download time GB 79 Receiver report Display reports regarding failures and changes for timer settings Go to TV Menu gt Setup gt Information gt Receiver report Identification You can check the TV ID on the screen for reporting to customer service Go to TV Menu gt Setup gt Information gt Identification Information on the software licence for this product Software licence You can read the software licences in this menu Go to TV Menu gt Setup gt Information gt Software licence Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties Deactivating Netflix function When you deactivate Netflix re
137. select their preferred network The service sorting will be changed in accordance with the preferred network If a conflict occurs between multiple networks this function allows you to select your preferred network 1 Press A V to select the desired network 2 Press OK to set the network selected You can reconfigure the following settings when you select Cable in the initial auto installation or the Auto installation menu Additional search Use this menu to add new services automatically after Digital search in the Auto installation menu has been completed Follow steps 1 to 5 in Searching for cable broadcasts on page 15 Manual search Normal Add new services within a specified frequency band After setting the items on the following screen the TV starts searching Special Use this option only when no channels can be found by Normal e Refer to the table about menu items in the centre column on page 15 Frequency 47 0 Symbol rate 6900 QAM modulation 64 Search start Manual adjust This function is the same as in Terrestrial Refer to Manual adjust in Terrestrial NOTE e Some functions may not display or be selectable depending on the country setting or cable provider selection 2 GB 41 Before selecting the type of search in Satellite setting you need to select the satellite broadcast SAT1 ASTRA 1 5 2 Hot Bird 13E SAT4 Tu
138. selected input modes but the operating procedures are the same e Items with Q cannot be selected for various reasons e Some items cannot be selected depending on signal types optional settings or connected devices Selects the coloured items on the screen hl m 4 Select indicated above GB 13 Using Software keyboard 123 Input cursor Press 4 to move the cursor when highlighted Input field The text you enter is displayed as you type it in Character Input characters by using these buttons 4 Put a line break Use the software keyboard when you need to input text RN ERN ER ER ER ER o Lk JL pm jin al r B ps Jit fie fiw mu EE i IM 11 Cursor Right 10 Clear 11 Erases the character string When the cursor is somewhere in a line The character string to the right of the cursor will be erased When the cursor is at the right end of a line The entire line will be erased Delete If the cursor is at the right end of a line this erases text one character at a time e You can also delete text by pressing on the remote control unit e Depending on the application there may be a different software keyboard than the one Initial auto installation Initial auto installation When the TV is powered on f
139. set to Off to cancel the RC control lock Press MENU on the remote control unit and set to Off to cancel the Button control lock e Refer to page 19 for menu operation using MENU on the TV o Bluetooth oet this function when using the Bluetooth devices with your TV It is possible to connect 3D glasses a keyboard mouse tablet and smartphone NOTE e When you use the Bluetooth device with your TV for the first time you must make pairing between the device and the TV Once the pairing is correctly carried out the Bluetooth device will be registered on the TV Bluetooth devices You can add delete or select Bluetooth devices If you connect a tablet or smartphone to the TV by Bluetooth you can listen its sound through the TV Addition of a Bluetooth Device Go to TV Menu gt Setup gt View Setting gt Bluetooth gt Pairing new device You can connect 3 kinds of Bluetooth devices listed below Keyboard device Mouse device Audio input device 1 Press to select the device you want to connect 2 Press 4 to select Search and then press OK 6B 49 3 Model names of the detected devices will be displayed 4 Select the device with the message NEW and then press OK 5 Wait the message indicating The pairing is completed and then press Before connecting the devices press the connect button on the Bluetooth device you wa
140. sets the appropriate selection from the AV mode menu depending on the lighting conditions and the type of programme watched For a highly defined image in a normally bright room For viewing a movie in a darkened room Adjust the picture to room illumination or ambient brightness For playing of video games Allows you to customise settings as desired You can set the mode for each input source x v Colour 2 Produce realistic colour on the TV u screen unlike any other signal For a clear cut image emphasising high contrast for sports viewing For a clear cut image emphasising high contrast for sports viewing the Picture and Audio settings cannot be adjusted DE Refer to page 74 for details 1 is available only when selecting HDMI 1 HDMI 2 HDMI 3 HDMI 4 or PC from the INPUT menu 2 x v Colour is available only when accepting an x v Colour signal through an HDMI terminal NOTE f you select AUTO some selections in the AV mode menu may not be automatically set e Game type mode can be set Refer to Game type on page 37 STANDARD MOVIE MOVIE THX GAME Standard High motion DYNAMIC Fixed GB 35 Quattron Pro Drive Configures Quattron Pro Drive Mode settings Enhance the picture brightness 2 Enhance the sense of definition Off sy Expand the view angle NOTE e
141. side The image is split into a left and right 25 y image and then the images are stretched and 9 displayed sequentially to create a 3D image Creates 3D images from 3D images displayed on the top and bottom The image is split into a Top and Bottom top and bottom image and then the images are stretched and displayed sequentially to create a 3D image Creates 2D images from 3D images displayed Side by Side 2D side by side Only the left image is stretched and displayed The image does not appear in 3D 2D mode without using the 3D glasses Creates 2D images from 3D images displayed on the top and bottom Only the top image is stretched and displayed The image does not appear in 3D Top and Bottom 2D GB 72 Enjoying 3D image viewing Viewing 3D images NOTE Hefer to the operation manual of the 3D glasses for details regarding usage e he TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode The image signal may contain a 3D identification signal You can enable the TV to automatically detect the 3D image type Page 72 1 Goto TV Menu gt Setup gt Option gt 3D setup gt 3 auto change When 3D auto change is set to Yes e The 3D display format is detected automatically and the appropriate 3D image is displayed 5 3D When 3D auto change is set to
142. sition and then press OK Repeat steps 2 and 3 until all desired channels are sorted Erase programme Channels can be erased individually 1 2 Press lt p to select Yes and then press Press A W 4 9 to select the channel you want to erase and then press OK e A message window pops up Press lt gt to select Yes and then press OK to erase the selected channel All the subsequent channels move up Hepeat steps 2 and 3 until all desired channels are erased Basic adjustment Individual setting PIN Allows you to use a PIN to protect certain settings from being accidentally changed Go to TV Menu gt Setup gt View setting gt Individual setting gt PIN NOTE e PIN input is required when executing PIN The default PIN is 1234 To reset the PIN setting PIN input will no longer be needed refer to Reset the PIN Page 78 When selecting Yes Register a four digit number to use the PIN function 1 Press lt p to select Yes and then press OK 2 Enter the four digit number as a PIN using 0 9 numeric buttons Enter the same four digit number as in step 2 to confirm e The system PIN has been changed successfully displays 4 Press OK NOTE e As a precautionary measure make a note of your PIN and keep it in a safe place that children cannot reach e 0000 cannot be set as the PIN code e To view
143. stem and Low White with reddish tone NOTE CMS satratin j adjusts each colour White with bluish tone Intermediate tone between High and Middle e When set to On the TV senses the surrounding light 10 point setting Dobson T1610 bonis and automatically adjusts the backlight brightness This function increases or decreases the saturation Make sure object obstructs the sensor which of a selected colour using a six colour adjustment R G B Gain LO Adjusts the white balance by could affect its ability to sense surrounding light system R G B Gain HI changing the value of each item does MOI iod 9D Dhidhihess 10 point setting is available only when selecting 3D from the mode menu This function adjusts the brightness of a selected Picture adjustments colour using a six colour adjustment system Adjusts the picture to your preference with the _ Colour gamut range Active motion 800 200 technologies provide following picture settings superior solutions for digital display picture quality Adjusts the range of a subset of colour to display o Adjustment items removing motion blur Select Motion enhancement the image Expanded colour gamut means more setting Active motion 800 Active motion 200 colourfulness images become more vivid Gp d 4 Cursor
144. such as streaming media Wired connection overview Q PC Router commercially available ETHERNET cable commercially available Network How to connect Router ETHERNET terminal Ex 29 aa ETHERNET cable commercially available 1 Switch on the router commercially available Hefer to the router s operation manual for switching on 2 Connect the ETHERNET terminal on the TV to the router commercially available with an ETHERNET cable commercially available 3 Go to Network setup gt Auto setup and then press OK GB 64 4 Press A F to select Wired and then press OK 5 Confirm the message on the screen and then press OK to go to the next step 6 Perform Connection test after the connection is completed Press lt p gt to select Yes and then press OK 7 connection test result will be displayed the screen Follow the on screen instructions for the settings after this step e f you want to change the IP settings manually go to Network setup Manual setup IP setup and follow the on screen instructions and the operation manual of the router Network setup This TV is equipped with a wireless LAN function O Wireless connection overview fr PC Wireless LAN router access point Wireless LAN LCD TV Network NOTE e When using the SHARP wireless LCD TV try to provide as much f
145. sults in accident or injury e You can ask qualified service personnel about using an optional bracket to mount the TV to a wall e When you mount the TV on a wall you should attach the supporting post NOTE e Detach the cable tie on the rear of the TV when using the optional mount bracket e Due to the terminal configuration on this TV when you wall mount this model make sure there is enough space between the wall and the TV for the cables e To use this TV mounted on a wall remove the AC cord holder and the covers at the 4 locations on the rear of the TV and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV Wall mount audio setup When you mount the TV on a wall you can adjust the sound to a more suitable one by setting this function to Yes Go to TV Menu gt Setup gt View setting gt Wall mount audio setup GB 85 Do not mount the TV at an angle Due to the terminal configuration on this TV when you wall mount this model make sure there is enough space between the wall and the TV for the cables The wall mount kit sold separately allows you to mount the TV on the wall For e lo use this TV mounted on a wall remove the cable tie as needed detailed information on installing the wall mount see the instructions provided Do not use screws that do not comply with the VESA standa
146. t function on the Miracast device and connect to the TV The TV changes according to the behavior of the device NOTE e When the TV is turned off or the connection is ended on the device you must connect the device again e When connecting using a PIN code first select the corresponding menu on the Miracast menu and then perform the operations from step 1 If you want to specify the preferred band to use with this function select the corresponding menu on the Miracast menu For details about the operation of the Miracast compatible device check the manual for that device Miracast function has two connection modes PUSH Button Mode and PIN code Mode User can select connection method in TV menu When the connection is made device screen will be displayed in the TV PUSH Button mode 1 Change input source to Miracast by pressing gt 2 n Miracast device smartphone tablet enable Miracast function The device starts to search for the TV with Miracast in standby mode 3 TV name will be shown then select it When the connection is made device screen will be displayed in the TV PIN Code mode 1 Change input source to Miracast by pressing gt 2 Miracast device smartphone tablet enable Miracast function The device starts to search for the TV with Miracast in standby mode TV name and PIN code will be shown PIN code is created randomly Ente
147. the power shuts off and then comes back on The screen will have returned to its original settings NOTE e PIN input is required when executing Reset The default PIN is 1234 To change the PIN setting refer to Individual setting PIN Page 43 To reset the PIN setting PIN input will no longer be needed refer to Reset the PIN shown above e Reset is greyed out in 3D mode To select the Reset menu you need to switch to 2D mode GB 78 Updating your TV via DVB T T2 77 Getting update information C S S2 You can select the method of update Ensure that your TV software version is always upto 1 Ifthe software is updated the confirmation ma Picture Audio test message New download information has been date From time to time SHARP will make updated TV base software and DVB software available detected appears When external equipment is connected with the NING Pv receives Ene Update service While In TV powered on and there is no audio video output standby mode a confirmation message displays the TV may determine which equipment could Dow fter t th ownload setup P cause problem between the TV and the external When the download is available only at a later time 4 mu a confirmation message regarding the scheduled equipment Go to TV Menu gt Setup gt View setting gt date and time t
148. timer setting or USB recording When the AC cord is unplugged The USB recording timer setting is cancelled USB recording may be automatically stopped when signal reception is poor Only this TV can playback the programme recorded on the USB HDD connected to this TV The programmes cannot playback on other TV or PC When a CAM PIN code is required for recording a programme it is necessary to enter the CAM PIN code in advance Page 11 SHARP corporation bears no responsibility regarding compensation for content when recording cannot does not take place loss of recorded data or other direct or indirect damages related to these matters Please be forewarned O Buttons for USB recording operation Control panel Remote control unit CONTROL EXT MEDIA E Displays the list of the programmes recorded by USB recording Start recording the programme you watching e You cannot playback the recorded programme until several seconds after pressing REC to start recording REC STOP Stop recording gt Playback the recorded programme Stop the programme in playback and go back to the real time broadcast live Pause the programme in playback USB recording continues e This function is released in 15 minutes Reverse each time you press this button i reverse speed changes in three levels Fast forward each time you press this button the forward speed changes in three le
149. ting no radio broadcasting is transmitted by DVB the radio broadcasting will be skipped EXT MEDIA buttons EXT MEDIA buttons are used for AQUOS LINK functions and USB recording functions etc e AQUOS LINK Pages 30 33 Interactively operate compatible system devices using a single remote control unit e USB recording Pages 51 54 Record a programme you are watching Numeric buttons 0 9 Set the channel Enter desired numbers Set the page in teletext mode e When the five Nordic countries Sweden Norway Finland Denmark or Iceland are selected in the country setting from initial auto installation Page 14 DTV services are four digits When another country is selected DTV services are three digits C5 Flashback Return to the previously selected channel or external input AV MODE Page 35 Select audio video settings 8 Wide mode Pages 45 58 and 59 Select a wide mode 7 8 9 10 11 12 13 14 15 16 17 Sound mode Page 19 Select a sound multiplex mode Volume Increase decrease TV volume iX Mute TV sound on off HOME Display the screen for enjoying Internet connection and Home network functions as well as performing settings for the TV 3D Pages 67 76 Select between 3D and 2D image viewing 4 Cursor Select a desired item OK Execute a command ATV DTV SAT Display CH list when no other Menu sc
150. tions to the wireless network If your access point is set to a stealth mode that prevents detection by other devices you may not be able to establish a connection In this case disable the stealth mode on the access point If you want to change the IP settings manually go to Network setup Manual setup IP setup and follow the on screen instructions and the operation manual of the router Net TV What is Net TV Net TV offers internet service and websites tailored for your TV Use the TV remote control unit to browse the Net TV internet pages Net TV allows you to play movies view pictures listen to music play games and much more Net TV provides variety of services for each country You can browse other countries service as well If a service is unsuitable for children you can lock it as needed NOTE e Because Net TV is an online system it can be modified over time to better serve its purpose e Some Net TV services may be added changed or discontinued after some time e Some open internet websites may not be tailored for a TV screen and may not be displayed correctly e You cannot download and save files nor install plug ins DISCLAIMERS e SHARP corporation bears no responsibility regarding the content and quality of the content provided by the content serve provider NETFLIX Display the start page Go to gt NETFLIX f you have a remote control with NETFLI
151. to perform the channel setting for digital satellite and analogue individually and reconfigure the settings after the initial auto installation has been completed 1 Goto TV Menu gt Setup gt View setting gt Auto installation 2 Press lt p to select Yes and then press Press A W 4 9 to select the desired language and then press OK NOTE PIN input is required when executing Auto installation The default PIN is 1234 To change the PIN setting refer to Individual setting PIN Page 43 To reset the PIN setting PIN input will no longer be needed refer to Reset the PIN Page 78 You cannot set the Home Store setting and the country setting in Auto installation in the Setup menu If you want to reconfigure those settings automatically execute initial auto installation after executing Reset from the Setup menu e he current country setting is displayed on the screen 4 Press to select the broadcast standard you want to search and then press OK Digital search After selecting the service you want to search either Terrestrial or Cable refer to Digital broadcast setting on page 15 Analogue search The TV searches for sorts and stores all the receivable TV stations Refer to Analogue broadcast setting on page 15 Satellite search After selecting Satellite search the current DVB S S2 setting screen is displayed Refer to the S
152. tter on the TV and the receiver on the 3D glasses Is the power of the 3D glasses turned on Press the power button for at least 2 seconds to turn on the 3D glasses e Images displayed in 3D mode appear doubled while you are wearing the 3D glasses Are the 3D glasses set to 2D mode Press the power button while viewing 2D images the LED light blinks in green and the 2D images switch to 3D images Images displayed 3D mode appear 2D while you are wearing the 3D glasses e For further details refer to the operation manual of the 3D glasses GB 76 Appendix Troubleshooting Problem Possible solution e No sound Is the volume too low e No power e s the AC cord disconnected If you do not clearly hear the sound for the visually impaired Check if you pressed 1 on the TV go to TV Menu Setup Audio Audio description e The TV cannot be e External influences such as lightning static electricity etc setting gt Mix level and select the upper level to turn up the volume operated may cause improper operation In this case operate the TV Make sure that headphones are not connected after first turning off the power or unplugging the AC cord Check if you pressed aX on the remote control unit and re plugging it in after one or two minutes Is the proper item selected in the Audio select menu Remote control unit e Are batteries inserted with polarity aligned w
153. unted here Enjoying 3D image viewing Using the 3D glasses Before using the 3D glasses for the first time remove the insulating sheet attached to them To view 3D images it is necessary to pair the 3D glasses and TV To confirm pairing of the 3D glasses and TV make sure that 3D images are displayed on the TV screen e When the power button is pressed for 2 or more seconds with the power off pairing with the TV starts When pairing is completed successfully the LED blinks in green for 3 seconds To switch between 2D and 3D modes briefly press the power button 50 cm 2m NOTE e When paired make sure that the 3D glasses are at a distance of 50 cm 2 m from the TV If too close pairing cannot be performed e Pairing cannot be performed when other wireless devices are being used nearby In such case turn off other devices and try pairing again GB 69 When viewing 3D images you can press the power button to switch between 2D and 3D modes This is useful when several people are viewing 3D images on the same TV with some people wanting to watch in 3D and some people wanting to watch in 2D O Viewing 2D images When you press and hold for less than 2 seconds while viewing 3D images the LED light blinks in red and the 3D images switch to 2D images O Viewing 3D images When you press and hold for less than 2 seconds while viewing 2D images the LED light blinks in green
154. utton e When the power button is pressed for 2 or more seconds with the power off pairing with the TV starts When the power button is pressed for 2 or more seconds with the power on the power turns off When paired the power will turn off if the power button is pressed for 2 or more seconds When the power button is pressed for less than 2 seconds with the power off the 3D glasses will turn to standby When the 3D glasses are in 3D mode with the power on pressing the power button for less than 2 seconds will turn the 3D glasses to 2D mode When the 3D glasses are in 2D mode with the power on pressing the power button for less than two seconds will turn the 3D glasses to 3D mode When paired the 3D glasses will be non reactive if the power button is pressed for less than 2 seconds LED light e When paired with the TV the LED light blinks in red and green e When pairing is completed successfully the LED blinks in green for 3 seconds e When the power is turned on the LED lights up in green for 3 seconds e When 3D mode the LED blinks in green in 3 second intervals e When in 2D mode the LED blinks in red in 3 second intervals e When the power is turned off the LED blinks in green 3 times NOTE e When in low voltage mode When 3D mode the LED blinks in green in 3 second intervals When in 2D mode the LED blinks in red in 3 second intervals Nose pad mount e The dedicated nose pad can be mo
155. vels 4 m backward to the previous 4 point Jump forward to the next chapter point Playback will resume after jumping backward by the time interval you set in Jump time setting Page 54 Playback will resume after jumping forward by the time interval you set in Jump time setting Page 54 Chapter points are fixed at 10 minute increments GB 52 NOTE Refer to Regarding Select recording device Page 30 when the buttons for USB recording do not work Instead of pressing buttons on the remote control unit most of the operations shown to the left are also available on the screen with the control panel You can call up this control panel by pressing CONTROL on the remote control unit or select Control USB from TV Menu gt Setup gt Option gt Option for view The Audio description setting menu does not work during USB recording playback USB recording stops if no operation detected for three hours When recording operations are not stopped manually recording will automatically stop after six hours To release USB recording press REC STOP Bi change the DTV SAT channel or change INPUT Some functions do not work during USB recording USB recording does not start automatically but starts only when REC is pressed or when a USB recording timer setting is started The PIN is required when you use the buttons such as lt q gt gt
156. vert effect is available only when selecting 2D 3D refer to Watching 2D images 3D shown to the left B button 3D setup Page 75 Y button 6B 74 Configuring the TV settings to enhance 3D image viewing You can make various settings to enhance 3D image viewing c3 C c C Alg 14 MENU C E Ga Basic operation Go to Menu gt Setup gt Picture gt select adjust the item you want to set NOTE e Which items can be selected adjusted differs depending on whether the TV is in 2D mode or in 3D mode The audio and video settings can be changed to suit the programme or input content being watched 3D Lowers image brightness for easier viewing NOTE You can select AV mode by pressing MODE on the remote control unit Enjoying 3D image viewing You can adjust the backlight of the TV for 3D image viewing The screen brightens NOTE e When High or Low is selected Backlight and Range of are not available e The 3D brightness boost is not available for 2D mode e The 3D brightness boost items can be saved for every 3D AV mode item STANDARD 3D MOVIE 3D GAME 30 EN 3D setup se rm Basic operation Go to TV Menu gt Setup gt Option
157. with the control panel You can display this control panel by pressing CONTROL on the remote control unit or select Control USB media or Control Home network from TV Menu gt Setup gt Option gt Option for view e he buttons in the EXT MEDIA on the remote control unit perform the same operations as those on the control panel When you disconnect the USB device be sure to the following steps 1 Press B on the remote control unit e Display USB media menu 2 Press A V to select USB device removal and then press OK 3 Press lt p to select Yes and then press You can view photos in 3D mode 1 Press B to display the USB media menu screen 2 Press to select 3D display and then press OK e See pages 67 76 for details on the 3D function NOTE e In 3D mode you cannot rotate the photos e You can select 3D display from USB media menu only when the thumbnails screen for the photo mode in USB media mode is displayed on the screen Other useful features Video file format J Dixo setup orae a Home network server compatibility This is the function to confirm your registration code You need to register the code at www divx com Go to Menu gt Setup gt View setting gt DivX setup DivXG VOD registration You can find your registration code on this menu You need to register the TV at www divx com before playing the
158. y before using this product Contents nligorolt eii o pe 1 Dear SHARP 1 Contents seta p 1 Important safety 2 Supplied accessories 4 Optional accessories 4 Preparation 5 Attaching the stand unit 5 Using the remote control unit 6 Part names and functions 7 7 TV rear VIEW 7 Remote control eorura 8 guide ER NE 9 Operation 9 Inserting the CA card into the Cl module 11 Recording CAM PIN setting 11 CI plus 1 3 STANO e 11 Using the HOME screen 12 Using the Menu 13 Using Software keyboard 13 Initial AUTO installallon eieioo eio iron eoru 14 In

Sharp LC-80UQ10E 80" Full HD 3D compatibility Wi-Fi Grey LED TV

Contents

Download Pdf Manuals

Related Search

Related Contents

Sharp LC-80UQ10E 80&quot; Full HD 3D compatibility Wi-Fi Grey LED TV

Contents

Download Pdf Manuals

Related Search

Related Contents

Sharp LC-80UQ10E 80" Full HD 3D compatibility Wi-Fi Grey LED TV