Home

Samsung UE55H6400AW 55" Full HD 3D compatibility Smart TV Wi-Fi Black

1. e Wall mounted LAN Outlet Connecting to a Wired Internet Network Automatically Network gt Network Settings Automatically connect to an available network 1 Set the Network Type to Wired and then select Connect 2 The TV attempts to connect to an available network Once successful you will see a confirmation message Select OK If the attempt fails try again or connect manually Connecting to a Wired Internet Network Manually Network gt Network Settings With networks that require a static IP address you will need to enter the IP address subnet mask gateway and DNS values manually to connect to the network To get these values contact your Internet Service Provider ISP Refer to the Dynamic versus Static IP Addresses section for more information on dynamic IP and static IP addresses 1 Set the Network Type to Wired and then select Connect Select your network type 2 Select Stop when the TV attempts to connect to the network Once the network connection has been interrupted select IP Settings Connection verification cancelled Oo Wired network connection test stopped 3 Inthe IP Settings screen set the IP setting to Enter manually enter the IP Address Subnet Mask Gateway and DNS Server values and then select OK e Use one of the following methods to enter the numerical values Set the numbers using the a and w buttons Using Samsung Smart Control Press KEYPAD butt
2. 3D Precautions A Warning e When viewing a 3D video under a fluorescent lamp 50 Hz 60 Hz or 3 wavelength lamp you may notice a small amount of screen flickering G If this occurs dim or turn off the light e Switching the input mode while watching a 3D movie may disable the 3D function on the TV A As a result the 3D glasses may not function and the movie may not be displayed properly e Ensure you are within the working distance of the glasses when you view a 3D video A The images may not be viewable in 3D if you move outside of the working distance for 3 seconds x If the 3D glasses are moved outside of their working distance the signal from the TV will disconnect and the glasses 3D function will turn off after several seconds When this happens the red LED will turn on for 3 seconds e f you lie on your side while watching TV with 3D active glasses the picture may appear dark or may not be visible The actual 3D effect may be experienced differently depending on the viewer The 3D effect may not be visible if the visual ability of your left eye differs greatly from the visual ability of your right eye e f apart of the 3D glasses or lenses is defective or damaged it cannot be repaired and the glasses should be replaced If the glasses stop working within the warranty period the glasses can be repaired or replaced for free If the glasses have been damaged due to the fault of the customer or the warranty period
3. MANUAL Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model Serial No Contents Quick Guide Using the Smart TV Using Voice Control Using Motion Control Using the Samsung Smart Control Using the Football Mode Using the Multi Link Screen Editing channels Connecting Antenna and External devices Connecting Aerial Video Device Connection 15 Connecting HDMI 16 Connecting Component 17 Connecting External Input 18 Connecting SCART TV Audio through the External Speakers 19 Connecting HDMI ARC 20 Connecting Digital Audio Optical 21 Connecting Headphone 22 Connecting Audio Output Connecting to a Computer 24 Connecting HDMI Port 25 Connecting HDMI DVI Port 26 Connecting Samsung Link 26 Connecting Home Network DLNA Connecting with a Mobile Device 28 Mobile Device Screen on TV Screen Mirroring 29 Connecting Mobile Devices without a Wireless Router Wi Fi Direct 29 Connecting Samsung Link 30 Connecting Home Network DLNA 30 Connecting via Smart View 2 0 31 Name of TV on Network Input Signal Selection Using Remote and Peripheral Devices Inserting Batteries into Samsung Smart Control 32 When you see this alarm icon on the screen Pairing Samsung Smart Control 33 Reconnecting Samsung Smart Control Using Samsung Smart Control 34 Button Functions
4. Picture gt Picture Size gt Picture Size Most TV programmes and videos are displayed in full screen but some programmes and videos are larger or smaller Change the screen size for such programmes and videos so that the picture fits the screen better Supported screen sizes vary depending on the input signal Refer to the Picture Sizes and Input Signals section for more information about supported screen sizes e Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratios e 16 9 Set the picture to the 16 9 wide screen format e Wide Zoom Magnifies the picture size more than 4 3 A magnified picture can be moved up and down e Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size A magnified picture can be moved up and down A Zoom is not available when Picture Size set to Wide Zoom e 4 3 Sets the picture to basic 4 3 mode A Do not leave the TV in 4 3 mode for an extended period The dark borders displayed on the left and right top and bottom of the screen may cause image retention This phenomenon can appear on LED and PDP TVs Screen burn this phenomenon can appear on PDP TVs This is not covered by the warranty e Screen Fit Displays the full image without any cutoff e Smart View 1 Reduces a 16 9 picture by 50 e Smart View 2 Reduces a 16 9 picture by 25 Adjusting the Screen Position Picture gt Picture Size gt Zoom Position or Position Adjusts the screen positi
5. The Problem The TV is hot The picture won t display in full screen The Mode Not Supported message appears The Subtitle item in the TV menu is grayed out The TV smells of plastic The Signal Information option under Self Diagnosis isn t activated The TV is tilted to the side The Broadcasting option has been deactivated The settings are lost after 5 minutes or every time the TV is turned off There is an intermittent loss of audio or video There are small particles on the TV s bezel The PIP menu is not available Try this Watching TV for an extended period of time causes the panel to generate heat The heat from the panel is dissipated through internal vents running along the top of the TV The bottom however may feel hot to the touch after extended use Children watching TV need constant adult supervision to prevent them from touching the TV This heat however is not a defect and does not affect the TV s functionality HD channels will have black bars on either side of the screen when displaying upscaled SD 4 3 content Black bars will appear at the top and bottom of the screen when you watch movies that have aspect ratios different from your TV Adjust the picture size options on your external device or set the TV to full screen The output resolution of the attached device is not supported by the TV Check the supported resolutions of the TV and adjust the external device s ou
6. 1280x800 60Hz 49 702 59 810 83 500 1280x1024 60Hz 63 981 60 020 108 000 1280x1024 75Hz 79 976 75 025 135 000 t t 1366x768 60Hz 47 112 59 790 85 500 tr 1440x900 60Hz 55 935 59 887 106 500 1600x900RB 60Hz 60 000 60 000 108 000 1680x1050 60Hz 65 290 59 954 146 250 oes 1920x1080 60Hz 67 500 60 000 148 500 LED 4500 series After connecting a computer to the TV set the screen resolution for the TV on the computer The optimal resolution is 1366 x 768 60 Hz If it is set to any other than in the table below the TV may display nothing Set the resolution properly referring to the user guide of the computer or its graphic card IBM 720x400 MAC 640x480 67Hz 35 000 66 667 30 240 832x624 49 726 74 551 57 284 VESA DMT Supported Video Resolutions 720 1440 x480i 60Hz 15 734 59 940 27 000 Licence DIVX HD DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that has passed rigorous testing to verify that it plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration cod
7. Adding Realism to Sports 133 Enabling Football Mode 133 Extracting Highlights Automatically 134 Functions Available in Football Mode 135 Viewing a Sports Event Recorded in Football Mode TV Viewing Support Features 136 Showing Subtitles 136 Subtitle Options 137 Changing Teletext Language 137 Digital Text 138 PIP Broadcast Viewing 139 Scanning for Available Channels 140 Selecting the Broadcast Audio Options 140 Audio Description 140 Genre Selection 140 Adult genre enabling Using the Channel Settings 141 Country Area 141 Manual Tuning 142 Fine Tuning the Screen 143 Transfer Channel List 143 Delete CAM Operator Profile 143 Satellite System 145 Common Interface Picture and Sound Settings Changing the Picture Mode and Adjusting the Picture Quality 146 Choosing the Right Picture Mode for the Viewing Environment 147 Adjusting the Picture Quality for Each Picture Mode 148 Fine Tuning Each Picture Mode Advanced Settings 150 Adjusting the Picture for Easier Viewing Picture Options Viewing in 3D 152 Starting 3D 153 Changing the 3D Mode 154 Adjusting the 3D Effect Picture Support Functions 155 PIP Broadcast Viewing 156 Changing the Picture Size and Position 157 Listening to Audio Only with the Screen Turned Off Picture Off 157 Resetting the Picture Mode Settings Changing the Sound Mode and Using Sound Effects 158 Choosing the Right Sound Mode for the Environment 159 Using Sound Effects So
8. Make a large counterclockwise circle with your hand to return to the previous menu A A small circle may not be recognised by the TV e Moving to the Smart Hub panel Move your hand from left to right or from right to left as you would turn a book page You can directly move from Smart Hub to another panel screen Example SAMSUNG APPS panel On TV panel e Displaying Smart Hub s context menu On the Smart Hub screen fold your index finger for more than 1 second and spread it out This displays the selected item s context menu A The screen s option menu differs depending on the selected lists Showing and Hiding Animated Motion Guide Navigate to System gt Motion Control and select Animated Motion Guide from the menu Now you can display an animated guide when Motion Control is activated Adjusting Pointer Speed Navigate to System gt Motion Control gt Pointer Speed and select a pointer speed Motion Control Screen Layout Motion Control Layout on the TV Screen Activating Motion Control while watching the TV displays the following icons on the screen A Icons appearing on the screen may vary depending on the model Adjusts the volume Mutes or unmutes the TV Changes the channel Launches Smart Hub You can split the TV screen and use variable functions such as watching the TV surfing the web and watching the video and so on A Availability depends on the model Press this button to search for
9. e The app supports motion control e Y The app supports voice control e The app is installed on a USB device e O The app supports a pointer that can move by the Samsung Smart Control Default Apps e Manual The embedded e Manual contains information Using Web Browser Web Browser is an Internet browsing app Using Web Browser you can surf the Internet on the TV in the same manner as you would using a PC even while watching a TV programme on PIP ey F Y Use a keyboard and mouse for a more convenient web browsing experience A The browsing screen may differ from that on a PC Browsing Methods Web Browser provides two browsing methods Pointer Browsing and lt gt Link Browsing Pointer Browsing enables you to move the pointer for selection while Link Browsing allows using the direction arrows to move the focus The default browsing method of Web Browser is Pointer Browsing To enable Link Browsing select the Link Browsing icon Command and Status Bar at a Glance Open the Web Browser to display the command and status bar at the top of the screen The following items are available Back Move to the previous page Forward Move to the next page Bookmarks amp History Move to the Bookmarks amp History screen On this screen add the current page to Bookmarks or move edit or delete a bookmarked page Easily access visited pages by navigating the History screen EJ Home Page Move to the
10. Picture Sizes and Input Signals Picture Size Auto Wide 16 9 Wide Zoom Zoom 4 3 Smart View 1 Smart View 2 Screen Fit Input Signal ATV EXT AV DTV 576i p 720p DTV 1080i 1080p ATV EXT AV DTV 576i p 720p 1080i 1080p Component 480i p 576i p 720p 1080i 1080p HDMI 480i p 576i p 720p 1080i 1080p ATV EXT AV DTV 576i p 720p 1080i 1080p Component 480i p 576i p 720p 1080i 1080p HDMI 480i p 576i p 720p 1080i 1080p ATV EXT AV DTV 576i p 720p 1080i 1080p Component 480i p 576i p 720p 1080i 1080p HDMI 480i p 576i p 720p 1080i 1080p HDMI 480i p 576i p 720p 1080i 1080p DTV 576i p 720p 1080i 1080p HDMI 480i p 576i p 720p 1080i 1080p DTV 1080i 1080p Component 1080i 1080p HDMI 720p 1080i 1080p The Picture Size setting is applied to the current source The applied Picture Size will remain in effect whenever you select that source unless you change it Installing an Anti Theft Kensington Lock A Kensington Lock is a physical device that can be used to protect the TV against theft Look for the Kensington slot on the back of the TV The slot has a fm icon next to it To use the lock wrap the lock cable around an object that is too heavy to carry and then thread it through the TV s Kensington slot The lock is sold separately The method of using a Kensington Lock may differ for each TV model Refer to the Kensington Lock manual
11. check the signal strength or refer to the external device s user manual The Problem Flickering and Dimming Component Connections Screen Colour Screen Brightness Motion Plus Blur Unwanted Powering Off Problems Powering On Unable to find a Channel Try this If your Samsung Television is flickering or dimming sporadically you may need to disable some of the energy efficiency features Disable Energy Saving System gt Eco Solution gt Energy Saving or Eco Sensor System gt Eco Solution gt Eco Sensor If the colour on your Samsung television screen is not correct or the black and white colours are off run Picture Test Support gt Self Diagnosis gt Picture Test If the test results indicate that the problem is not caused by the TV do the following e Confirm that the TV s video input connectors are connected to the correct external device video output connectors e Check the other connections as well If the TV is connected to an external device via a component cable confirm that the Pb Pr and Y jacks are plugged into their proper connectors If the colours on your Samsung TV are correct but just a little too dark or bright try adjusting the following settings first e Go to the Picture menu and adjust the Contrast Brightness Sharpness Colour and Tint G R settings If you notice ghosting or blurring on the screen use the Motion Plus option Picture gt Picture Options gt Motion Plus
12. gt buttons to scan through the video in 10 seconds intervals or enter a specific time value to jump to that point in the video Control the subtitle of the video Language Turn the subtitles on or off Sync When the video and the subtitles are not synchronised you can adjust the synchronisation Reset Sync Reset the subtitle synchronisation adjustment to 0 Size Choose the font size for the subtitles Encoding If the subtitles are broken you can change the encoding language Set the repeat mode Repeat One repeats the current programme only Repeat All repeats all programmes contained in the folder Rotate the video Change the picture size However the supported picture size is determined by the video content Change the Picture Mode setting Change the Sound Mode setting Choose a speaker to play the audio Choose a desired audio language This option works only when the video supports multi track sound View detailed information about the video Buttons and Functions Available while Playing Music Press enter to access the following buttons Pressing RETURN hides the playback buttons Pause Play Pause or resume the music Rewind Fast Forward Rewind or fast forward the music To restore normal playback speed select gt Previous Next Select i lt lt twice to play the previous music file Selecting 44 once reloads the current music file from the beginning To play the next music file select t
13. or Face Recognition Requirements for Using Voice Recognition The voice recognition rate varies depending on the volume tone pronunciation and ambient sound environment TV sound and ambient noise Requirements for Using Motion Recognition Before using motion recognition make sure the TV s camera has been turned on You should be located between 1 5m and 3 5m from the camera The actual recognition range may vary depending on the camera angle and other factors Motion Control relies on the TV camera and therefore will not function if the camera is pointed up or down Adjust the camera s angle using the wheel on the back of the camera Do not point the camera directly at the sun or any other light source or obstruct its view For the camera to recognise movement you have to stand out from the background The appropriate ambient brightness is 50 to 500 lux 100 Lux Bathroom 400 Lux Living Room Avoid direct sunlight when using Motion Control Run the Motion Control Environment Test to assess the camera s recognition range before using Motion Control Requirements for using Face Recognition You should be located between 1 5m and 4 0m from the camera The actual recognition range may vary depending on the camera angle and other factors The appropriate ambient brightness is 50 to 500 lux 100 Lux Bathroom 400 Lux Living Room Face Recognition can recognise up to 5 different users at a time The TV may have difficulty reco
14. 177 Setting Up a Password 178 Programme Rating Lock 178 Enabling Game Mode 178 Enjoying Rich Colours and Superior Picture Quality BD Wise 179 Enabling Disabling Sound Feedback 179 Locking Unlocking the Panel Keys 179 Showing Hiding the Samsung Logo while Booting 179 Enabling the TV to Boot Faster 180 Registering the TV as a DivX Certified Device Watching Paid DivX Movies 181 Restoring the TV to the Factory Settings 181 Turning the TV into a Display Model for retail stores Data Service 182 Auto Run Data Service 182 Using Data Service HbbTV Connecting to a TV Viewing Card slot 184 To connect the CI CARD follow these steps 185 To connect the Cl CARD Adapter follow these steps Teletext Feature Troubleshooting Getting Support 189 Support through Remote Management 191 Finding the Information You Need for Service There is a problem with the screen 191 Testing the Picture can t hear the sound clearly 194 Testing the Sound can t see 3D images clearly 195 Testing 3D Picture Quality There is a problem with the broadcast The computer won t connect can t connect to the Internet Data Service The Schedule Recording Timeshift function isn t working Anynet HDMI CEC isn t working am having trouble launching using apps My file won t play want to reset the TV Other Issues Notes and Precautions Before Using the Recording and Timeshift Functions 203 Before Using
15. 37 Using the TV by Moving the Samsung Smart Control 38 Using the TV with the Touchpad 40 Displaying the Remote Control on the Screen virtual remote control Controlling External Devices with the TV Remote Universal Remote Setup 42 Setting Up the Universal Remote Control 43 Controlling External Devices with the TV Remote Controlling the TV with a Keyboard 45 Connecting a Keyboard 46 Using the Keyboard Controlling the TV with a Mouse 47 Connecting a Mouse 48 Using the Mouse Entering Text Using QWERTY 49 Using Additional Functions Internet Connection Establishing a Wired Internet Connection 50 Connecting a LAN Cable 51 Connecting to a Wired Internet Network Automatically 51 Connecting to a Wired Internet Network Manually Establishing a Wireless Internet Connection 53 Connecting to a Wireless Internet Network Automatically 54 Connecting to a Wireless Internet Network Manually 55 Connecting to a Wireless Internet Network with WPS Troubleshooting Internet Connectivity Issues 56 Troubleshooting Wired Internet Connectivity Issues 57 Troubleshooting Wireless Internet Connectivity Issues Mobile Network 58 Supported Telecom and Model Name Checking the Internet Connection Status Smart Features Multiple Functions on a Single Screen 60 Launching Multi Link Screen 60 Using Multi Link Screen 60 Selecting a Feature 60 Changing the Channel Volume Smart Hub 61 Testing Smart Hub connections 62 Opening the Hom
16. CEC and only when those devices are either in standby mode or turned on Anynet HDMI CEC can control up to 12 compatible external devices up to 3 of the same type With home theatre systems however the number of systems that can be controlled is limited to one To listen to 5 1 channel audio from an external device connect the device to the TV via an HDMI cable and the device s digital audio output connector directly to the home theatre system A home theatre system that has been connected to the TV using an HDMI cable and an optical cable supports 2 channel audio only 5 1 channel audio is however available for digital broadcasts with 5 1 channel audio Setting Up Anynet HDMI CEC System gt Anynet HDMI CEC Anynet HDMI CEC Enables disables Anynet HDMI CEC Set to Off to disable all Anynet related features Set to On to enable all Anynet HDMI CEC related features Auto Turn Off When set to Yes turns off Anynet HDMI CEC compatible external devices when the TV is turned off A Some Anynet HDMI CEC compatible devices do not support this feature Search for Devices AND Search for Anynet HDMI CEC compatible devices Using Anynet HDMI CEC Selecting an External Device 1 2 3 Select TOOLS The Tools list appears Select Anynet HDMI CEC from the list The Select Device screen appears Select a device and wait for the switch to take place This process may take up to 2 minutes to
17. Connect the correct aerial cable according to your viewing environment to the TV s aerial connector as shown tn the diagram It is best to connect the both connectors using a Multi Switch or Diseqc Switch etc and to set Aerial Connection Type to Dual A Availability depends on the specific model and area Video Device Connection Availability depends on the specific model and area Your TV has a variety of connectors for video input from external devices such as cable boxes satellite receivers Blu ray players DVD players camcorders and gaming consoles Below is a list of featured connectors shown in descending order of picture quality e HDMI e Component e External Input Connect a video device to the TV via an HDMI connector for the best picture quality If the device does not have an HDMI connector try a component connector to get the next best picture quality G The number of connectors and their names and locations may vary depending on the model G Refer to the external device s operating manual when connecting it to the TV The number of external device connectors and their names and locations may vary depending on the manufacturer Connecting HDMI Before connecting any external device or cable to the TV first verify the TV s model number A sticker containing the model number is attached to the back of the TV The connection method varies depending on the model The following types of HDMI cables are recomm
18. Sensor has adjusted the screen s brightness level you can manually adjust the screen s minimum brightness level by adjusting the Min Backlight Changing the Picture menu s Backlight setting while Eco Sensor is running automatically disables Eco Sensor e No Signal Power Off Select a time from the list If no signal is received for the specified duration the TV automatically cuts off the power to reduce power consumption e Auto Power Off If the TV remains turned on for four hours without any user input the TV will automatically turn off to prevent overheating Using Anynet HDMI CEC Use Anynett HDMI CEC to control all external devices that support HDMI CEC using just the TV s remote control Note that Anynet HDMI CEC only works with the TV s remote control and not with the panel keys You can configure the TV s universal remote function to control third party cable boxes Blu ray players and home theatres that do not support HDMI CEC using the TV s remote control Anynet Requirements Anynet cannot be used to control external devices that do not support HDMI CEC Anynet devices must be connected to the TV using an HDMI cable Some HDMI cables may not support Anynet HDMI CEC In this case you will need to replace the HDMI cable The TV remote control may not function under certain circumstances If this occurs select the Anynet device again Anynet HDMI CEC only works with external devices that support HDMI
19. States and other countries m rovi guide Trademark Rovi and Rovi Guide are trademarks of Rovi Corporation and or its subsidiaries Licence The Rovi Guide system is manufactured under licence from Rovi Corporation and or its subsidiaries Patent The Rovi Guide system is protected by patents and patent applications filed in the US Europe and other countries including one or more of the United States patents 6 396 546 5 940 073 6 239 794 issued to Rovi Corporation and or its subsidiaries Disclaimer Rovi Corporation and or its subsidiaries and related affiliates are not in any way liable for the accuracy or availability of the programme schedule information or other data in the Rovi Guide system and cannot guarantee service availability in your area In no event shall Rovi Corporation and or its related affiliates be liable for any damages in connection with the accuracy or availability of the programme schedule information or other data in the Rovi Guide system Open Source Licence Notice Open Source used in this product can be found on the following webpage http opensource samsung com Open Source Licence Notice is written only English Designed with TECHNOLOGY Glossary 480i 480p 720p 1080i 1080p Generally refers to the number of effective scanning lines that determines the screen s resolution There are two scanning methods interlaced and progressive Scanning Sequential projection of pixels to form images
20. TV The connection method varies depending on the model Connecting an AV receiver to the TV via a digital audio optical connector lets you listen to digital audio Connecting a device using an optical cable does not automatically turn off the TV speakers To turn off the TV s speakers set TV Sound Output Sound gt Speaker Settings gt TV Sound Output to something other than TV Speaker Adjust the audio device s volume using its remote control A An unusual noise coming from the audio device while you are using it may indicate a problem with the audio device itself If this occurs ask for assistance from the audio device manufacturer A Digital audio is only available with 5 1 channel broadcasts Refer to the diagram and connect the optical cable to the TV s digital audio output connector and the device s digital audio input connector DIGITAL AUDIO IN OPTICAL DIGITAL AUDIO OUT OPTICAL Connecting Headphone A Availability depends on the specific model and area Before connecting any external device or cable to the TV first verify the TV s model number A sticker containing the model number is attached to the back of the TV The connection method varies depending on the model Refer to the diagram and connect the headphones to the headphone output connector Only use headphones with a 3 conductor TRS type jack The headphone volume and the TV volume are adjusted independently of each other While the headphone
21. The higher the number of pixels the clearer and more vivid the images Progressive A sequential scanning method that scans every line one after another Interlaced A staggered scanning method that scans every other line until the end of the screen and then fills in the remaining lines Example If the number of horizontal scan lines is 480i Scans 240 lines from start to finish and then scans the remaining 240 lines for a total of 480 lines General differences between 480i and 480p are as follows 480i 480p Horizontal Frequency 15 75Khz 31 5Khz FPS 30 60 Lines on Screen 480 480 ARC Audio Return Channel Generally a separate RCA or optical cable needs to be connected in order for the TV audio to be heard through an AV receiver With receivers that support ARC however digital audio can be transmitted via the HDMI cable only DVI Digital Visual Interface Connecting the TV s DVI connector to a computer s DVI connector via an HDMI to DVI cable lets you use the TV as a computer monitor However HDMI to DVI cables deliver video signals only You must connect a set of speakers to the computer using a separate cable to hear the computer s audio HDMI High Definition Multimedia Interface HDMI is a method of transmitting both video and audio signals via a single cable Dynamic versus Static IP Addresses If the network requires a dynamic IP address use an ADSL modem or router that supports the Dynamic Host Conf
22. Web Browser Rearranging Apps on the SAMSUNG APPS Screen 1 2 3 4 On the SAMSUNG APPS screen move to the app you wish to change the order Press and hold the Enter button A pop up menu appears On the pop up menu select Move Move an app to a desired location and select the app again Removing an App from the TV Note that if an app is removed the data related to the app is also deleted Removing an App 1 2 3 On the SAMSUNG APPS screen move to the app you wish to remove Press and hold the Enter button A pop up menu appears On the pop up menu on the screen select Delete A removal confirmation window appears Select Yes The selected app is removed Removing Multiple Apps 1 Z On the SAMSUNG APPS screen move to the app you wish to remove Press and hold the Enter button A pop up menu appears On the pop up menu on the screen select Delete Multiple A check box appears on the app icons Select all the apps you wish to remove and then select Delete A removal confirmation window appears Select Yes Selected apps are removed Rating Reviewing an App On the detailed app information screen you can rate the app or send a review to the app developer To rate or review an app you must log into your Samsung Account You can only rate or review with a TV purchasing apps and games Updating an App 1 On the SAMSUNG APPS screen move to the app you wish to update 2 Press and hol
23. aerial according to a certain satellite when the signal of that satellite is needed the satellite aerial can be moved to pre populated position Satellite Selects the satellite to set the position for Transponder Selects a transponder from the list for signal reception Moving Mode Selects the movement mode between discrete and continuous movement Step Size Adjusts the step size degrees for the aerial rotation Step Size is available when Moving Mode is set to Step Go To Stored Position Rotates the aerial to the stored satellite position Aerial Position Adjusts and stores the aerial position for the selected satellite Store Current Position Stores current position as the selected positioner limit Installer Mode Sets limits to the scope of movement of satellite aerial or reset the position Generally installation guide uses this function Limit Position Selects the direction of the positioner Limit Aerial Position Adjusts and stores the aerial position for the selected satellite Store Current Position Stores the current position as the selected positioner Limit Go to zero Moves the aerial to the reference position Reset positioner limit Allows the aerial to rotate over the full arc Reset all settings All satellite settings will be reset to the initial values Common Interface Availability depends on the specific model and area Broadcasting gt Common Interfa
24. and password information saved on the TV is deleted and the account information of any linked apps are also deleted amp i k Y To delete your account information you must be signed in with your Samsung Account Using the Games Panel W 4 gt A I a NIQRLO I Del aak aai F A i AZ es race All Games Actual menu screen may differ depending on the TV model This service or some of functions of it may be not available in some countries or region Navigate to Smart Hub gt Games to confirm the optimising game apps for Smart TV and detailed information on Smart hub This makes it easier to download and play games In addition you can manage games that you have downloaded or purchased with your Samsung Account Before you use the Games panel check if the TV is connected to the Internet The TV must be connected to the Internet in order to use the Games panel To use the Games panel you must log into your Samsung Account Using Pop Up Menu Functions In the Games panel move the focus to a desired game and press and hold the Enter button The following functions are available e Downloading Deleting a Game Downloads or deletes the game from the TV e Viewing Detail Information of the Game Displays detailed information of the selected game Installing and Running a Game When the TV s internal memory is insufficient you can install a game on a USB device You can play a game inst
25. broadcasts can be viewed using the Recorded TV option at the bottom of the On TV screen or the USB Drive option at the bottom of the MULTIMEDIA screen Run the Smart Hub and then choose Recorded TV from the bottom of the On TV screen or USB Drive from the bottom of the MULTIMEDIA screen Select a USB recording device A list of recordings appears Select a recording file from the list or select gt to play the selected file Available Buttons and Features while Playing Recordings Press enter Playback controls will appear To hide the controls press Return Oo Buttons that appear are different depending on the file being played Zoom You can pause the current file recorded programme and zoom in on one of 9 different sections of the screen A You can only use this function for programmes recorded in Football Mode Stop Stop the playing files recorded programme and then move the storage files recorded programme Pause Play Pause the file recorded broadcast or resume if already paused When the video is paused you can use the following functions However audio will not be heard while the video is paused Step Press 11 to scan the paused video one frame at a time Slow Motion The button plays the video back at 1 4 the normal speed Rewind Fast Forward Rewind or Fast Forward the recording file recorded programme Repeatedly select the button to make the rewind fast forward speed faster b
26. complete and cannot be cancelled once started Accessing the External Device s Menu Once the TV has switched over to the selected device you can access the device s menu using the TV s remote control Select TOOLS The following list appears though it may differ based on the external device Anynet HDMI CEC Displays a list of HDMI CEC compliant devices connected to the TV Select View TV to exit Anynet HDMI CEC and start watching TV To switch to the screen of an external device simply select that respective device Connected Device Menu Display the menu of the connected device If the target device is a DVD player the DVD menu is shown Connected Device Tools Displays a list of frequently used functions available for the device If the target device is a DVD player the DVD playback menu is shown A Some external devices may not support this option Connected Device Title Menu Display the connected device s title menu If the target device is a DVD player the DVD title menu is shown ay z i z Y Some external devices may not support this option Using the e Manual Launching the e Manual Support gt e Manual The embedded e Manual contains information You can also download a copy of the e Manual from Samsung s website and read it on your computer or print it out Yellow words indicate a menu item white bold words indicate remote control buttons Arrows are used to indicate the menu
27. computer of a mobile device may not play depending on the encoding type and file format of the content In addition some functions may not be available The multimedia content may not smoothly play depending on the network status If this is the case use a USB storage device Navigate to Smart Hub gt Samsung Account menu and select Log In to sign in with your the Samsung Account Select Network Device in the MULTIMEDIA panel Devices connected to the TV are listed Select a device connected via Samsung Link Folders and files shared by the selected device will be listed Select a media content you wish to play from the list This plays the selected content G Alternatively move to the media content and press gt to play Playing Media Content from a Storage Service Storage Services store user content such as photo video and music files on a server so that they can be viewed played on the TV over the Internet It s also possible to view your media content saved on Storage Services such as Dropbox and SkyDrive from the TV To play content from a Storage Service you must log into your Samsung Account and link it to the Storage Service account 1 Navigate to Smart Hub gt Samsung Account menu and select Log In to sign into your Samsung Account 2 Select Storage Service in the MULTIMEDIA panel Storage Services linked to your Samsung Account appears 3 Select a Storage Service Folders and files found in the selected St
28. for more information Read Before Setting Up a Wireless Internet Connection Wireless Internet Precautions e This TV supports the IEEE 802 11a b g n communication protocols Samsung recommends using IEEE 802 11n Video files stored on a device connected to the TV via DLNA may not play back smoothly e To use wireless Internet the TV must be connected to a wireless router or modem If the wireless router supports DHCP the TV can use a DHCP or static IP address to connect to the wireless network e Select a channel that is not currently in use for the wireless router If the channel set for the wireless router is currently being used by another device the result is usually interference and or a communications failure e Most wireless networks have an optional security system To enable a wireless network s security system you need to create a security key using characters and numbers This security key is then needed to connect to a security enabled AP Wireless Security Protocols The TV only supports the following wireless network security protocols and is unable to connect to non certified wireless routers e Authentication Modes WEP WPAPSK WPA2PSK e Encryption Types WEP TKIP AES In compliance with the newest Wi Fi certification specifications Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802 11n mode If the wireless router supports WPS Wi Fi Protected Setup you can connect the TV
29. has expired a new pair of glasses will have to be purchased e The 3D glasses may not work properly due to interference from other 3D products or electronic devices that operate on the 2 4GHz frequency such as a microwave oven or Internet AP If the 3D function malfunctions due to interference please move all other electronic or wireless communication devices as far away from the glasses and the TV as possible e The 3D glasses may not work properly due to interference from other 3D products or electronic devices that operate on the 2 4GHz frequency such as a microwave oven or Internet AP If the 3D function malfunctions due to interference please move all other electronic or wireless communication devices as far away from the glasses and the TV as possible e The vividness of the image may appear degraded if you view 3D video in a place that is exposed to direct sunlight or illumination e The 3D glasses may malfunction if there is an electric field or metallic object such as a steel plate nearby Keep the glasses as far away as possible from electric fields and metallic objects e With SSG 3570 model glasses the glasses may power off if you remain stationary while viewing 3D video for an extended period of time e With SSG 3570 model glasses if the 3D glasses do not function immediately after you put them on when the TV is in 3D mode take them off and then put them back on Z Caution IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D IM
30. information through the search window in various services The virtual remote control appears Changes the source Turns the TV off Motion Control Layout on the Smart Hub Screen Activating Motion Control while using Smart Hub displays the following icons on the screen Adjusts the volume However this is only available for On TV Mutes or unmutes the TV However this is only available for On TV Changes the channel However this is only available for On TV Returns to the previous menu Press this button to search for information through the search window in various services The virtual remote control appears Changes the source Turns the TV off Displaying Hidden Icons When Using Smart Hub When using Motion Control with Smart Hub the icons will disappear automatically after 2 seconds of inactivity To display the hidden icons move the pointer to one of the three edges shown below marked in blue and then hold it there for 1 second The icons will reappear on the screen Signing in with Face Recognition A Availability depends on the specific model and area Users can register their faces using the TV camera and sign in with their Samsung accounts through Face Recognition One face may be registered per account Depending on the ambient illumination level and or shadows over the face the TV may have difficulty recognising the user s face A Please read through the instructions befor
31. main screen Address Bar Check the address of the current page or enter a web page address to move to the page 9 Refresh 3 Stop Reload the current page or stop reloading the current page EJ Add to Bookmark Add the current page to Bookmarks Search Make a keyword search using the user specified search engine To change the search engine select the fy icon and then select a search engine in the Set Search Engine menu Zoom Zoom in or out of the current web page Ex PIP Use Web Browser while watching a TV programme on the same screen a Link Browsing Pointer Browsing Select one from two browsing methods supported by Web Browser eq Settings Configure the Web Browser settings Close Exit Web Browser New Tab Open a new tab Browsing Preferences Select the key item on the screen Configure the browsing settings to your needs or convenience X Some items may not be available depending on the web page Unavailable items are grayed out Approved Sites To prevent children from accessing inappropriate web pages limit access to pre registered web pages A You will be asked to enter a password when selecting Approved Sites Enter the password The default password is 0000 Approved Sites feature Enable disable the Approved Sites feature Reset password for Approved Sites Change the password Add current site Add the current web page to Approved Sites Manage Approved Sites Enter the a
32. must obtain a Cl or Cl CARD from a local cable service provider When removing the Cl or Cl CARD carefully pull it out with your hands since dropping the Cl or Cl CARD may cause damage to it Insert the Cl or Cl CARD in the direction marked on the card The location of the COMMON INTERFACE slot may be different depending on the model Cl or Cl CARD is not supported in some countries and regions check with your authorised dealer If you have any problems please contact a service provider Insert the Cl or CI CARD that supports the current aerial settings The screen will be distorted or will not be seen To connect the CI CARD Adapter follow these steps x We recommend attaching the adapter before installing the wall mount or inserting the Cl or Cl CARD A Turn the TV off to connect or disconnect a CI card adapter lt TV Rear 6000000006000000000000000 0000000 0000000000 9000000000000000000 0000 1 Insert the CI CARD Adapter into the two holes on the product 1 A Please find two holes on the rear of the TV Two holes are beside the COMMON INTERFACE port 2 Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2 Insert the Cl or Cl CARD A We recommend that you insert the Cl card before you mount the TV on a wall It may be difficult to insert after the mounting Insert the card after attaching the Cl Module on TV It is difficult to attach
33. off Changes the channel Moves the pointer or focus Place a finger on the touch pad and move the Samsung Smart Control The pointer on the screen moves in the direction and as much as the Samsung Smart Control is moved Press the touchpad to run the focused item Controls for when viewing playing a video photo or music file or watching a recorded programme You can also use the buttons to control content from an external device Use these colour buttons to access additional options specific to the feature in use Returns to the previous menu Additionally when you press this button while watching TV you can return to the previous channel Launches the Home Screen From the Home Screen you can search through favourite apps channels or sources and quickly access previously run or frequently used functions Also when you move to the panel screen you can use various service provided each service panel Displays the digital channel broadcasting schedule Shows the information about the current digital broadcast programme or content Enable Football Mode for an optimal sports viewing experience Displays a menu on the screen Y Availability depends on the specific Samsung Smart Control You can split the TV screen and use various functions such as watching TV surfing the web watching video and so on Y Availability depends on the specific Samsung Smart Control Additional Functions Press and hold the following buttons for 1
34. only available if the Clock has been set e Setup Specify the dates and the duration Use Manual to specify the days of the week e Time Set the time that the TV turns on automatically e Volume Specify the volume when the TV turns on e Source Select the signal source from the list Specify the channel or source to be displayed when the TV turns on To specify a USB device a USB device must first be connected to the TV To play media from an HDMI or Component source such as a DVD player or Blu ray player the device must already be turned on and playing the media when the TV is turned on e Aerial Set the Source to TV to select a broadcast signal e Channel set the Source to TV to select a channel e Music Photo Set the Source to USB to choose a USB folder that contains music or photo files Selecting both music and image files plays the music files and displays the images at the same time Restrictions e This feature will not function properly if the selected USB device does not contain media files or a folder has not been specified e The slideshow will not start if there is only one image file on the USB device e Folders with long names cannot be selected e Always use different folder names for multiple USB devices e Use a USB memory stick or multi card reader The On Timer may not work with certain battery powered USB devices MP3 players or PMPs because the TV may take too long to recognise the device Turning Off
35. output setting on your PC If you are using a DVI to HDMI cable a separate audio cable is required can t connect to the Internet The Problem The wireless network connection failed The software update over the Internet has failed Try this Make sure the TV is connected to a wireless IP router Check the network connection status If the TV is not connected to a network connect to a network The upgrade stops if you already have the latest software version Data Service The Problem Try this If Auto Run Data Service is set to On messages will automatically appear on Why am getting on the screen when you watch a broadcast that supports the Data Service If the screen messages when broadcast doesn t support the Data Service no messages will appear on the haven t selected the screen Data Service option If you do not wish to receive Data Service messages disable Auto Run Data Service How do hide Data Press EXIT button to hide the messages If you do not wish to receive Data Service Service messages messages disable Auto Run Data Service Enabling the Auto Run Data Service option automatically displays messages on the How do use the Data screen whenever you watch a broadcast that supports the Data Service You can Service press the corresponding buttons shown on the screen to access additional features and functions offered by that broadcast Interactive services include viewer surveys quizzes ticke
36. path Example Picture gt Picture Mode Select e Manual The e Manual loads Select a category from the side of the screen Once a selection has been made the contents of the selected category appear Select an item from the list This opens the e Manual on the corresponding page If a description doesn t fit on a single screen You can scroll pages in one of the following ways Position the focus on the page to display onthe screen Press A V button Additional e Manual Features Loading Pages using Keywords Select Search from the side of the screen to bring up the search screen Enter a search term and then select Done Select an item from the search results to load the corresponding page Loading Pages from the Index Page Select Index from the side of the screen to bring up the index screen Select a keyword from the list to navigate to the relevant page Using History to Load Previously Read Pages Select Recent pages from the side of the screen A list of previously read pages is shown Select a page The e Manual Jumps to the selected page Accessing the Menu from the e Manual Try Now Select Try Now on a feature description to directly move to the corresponding menu and try out the feature If you want to read an e Manual entry on a specific screen menu feature Using Samsung Smart Control press the KEYPAD button and select e Manual Using the remote control Press the E IMANUAL button A C
37. problem persists contact your Internet Service Provider Network setup is complete but unable to connect to the Internet If the problem persists contact your Internet Service Provider Mobile Network Availability depends on the specific model and area While connecting to the mobile network some functions might be unavailable Refer to the diagram and insert the Mobile Dongle sold separately into the USB port The Mobile Dongle must be connected to the TV in order to connect to the mobile network However the Mobile Dongle is sold separately and is not available from Samsung If you have any problems using online services please contact your Internet service provider Auto Ticker is not available when you set up mobile network Supported Telecom and Model Name e Vodacom Model No K4605 e MTN Model No E3131S E3251 e Safaricom Model No E303 Checking the Internet Connection Status Network gt Network Status Network werwork Status Network Settings Wi Fi Direct Multimedia Device Settings Screen Mirroring Device Name TV Samsung LE A Actual menu screen may differ depending on the TV model View the current network and Internet status Multiple Functions on a Single Screen A Availability depends on the specific model and area This allows you to search the Web use apps and much more while watching TV A Before using Multi Link Screen make sure the TV is connected to the Inte
38. schedule by 24 hours You can only view the future programme schedule It is available for moving the page using the A V button Moving to the Schedule Manager You can move to the Schedule Manager screen Adding Favourites Click Edit Favourite Channels to add the selected programme to the Favourites Viewing Detailed Information View detailed information about the selected programme The programme information may vary depending on the type of incoming signal and may not be available at all for certain programmes Select a current programme on another channel and select View Details to Watch or Record the programme Select an upcoming programme and select View Details for Schedule Viewing or Schedule Recording Checking the Current Programme Info While watching TV select INFO to view information about the current programme A In order to view the programme info you must first set the TV s clock Set the Clock System gt Time gt Clock A The programme information may vary depending on the type of incoming signal and may not be available at all for certain programmes In addition select right button to view information about the next programme and press enter to set up a Schedule Viewing or Schedule Recording for the upcoming programme Change the Broadcast Signal Broadcasting gt Aerial Choose your preferred method of receiving digital broadcasts Digital Signal Info and Strength Support gt Self Dia
39. sound output optimised for different viewing and listening circumstances The sound modes cannot be used when you are listening to audio through external speakers Standard This is the normal sound mode Music This mode emphasises normal music instead of voice Movie This mode is calibrated to provide the best sound for movies Clear Voice This mode emphasises voice Amplify This mode increases the overall intensity of high frequency sounds for a better listening experience It is designed for hearing impaired listeners Stadium Setting Football Mode System gt Football Mode to On automatically configures Sound Mode to Stadium for a more realistic viewing experience A Stadium cannot be selected by the user Using Sound Effects Sound gt Sound Effect Use sound effects to alter how the TV projects sound Restrictions e Sound effects can only be used with the Sound Mode set to Standard e Sound effects cannot be used when you are listening to audio through external speakers Choose a Sound Effect and then adjust the settings e DTS TruSurround HD Produces sound that will make you feel like you are sitting in a movie theatre or concert hall e DTS TruDialog Increases voice intensity to make dialog clearer e Equaliser AN Lets you adjust the speaker balance and make bandwidth adjustments Select Reset to reset the settings Sound Support Functions Selecting Speakers Sound gt Speaker Setting
40. the Push Notification setting of apps you wish to receive push notifications from to On Push notification function of the selected apps is activated A The Push Notification app list only shows installed apps that support Push Notification Settings Using an App while Watching TV If an app linked to a channel is installed on the TV you can view programme information and use related services offered by the app while watching TV Navigate to Smart Hub gt Apps Settings and set Channel Bound Apps to On A This feature is only available with apps supporting Channel Bound Apps installed on the TV Using On TV Panel Timeline View Trending Recorded TV Actual menu screen may differ depending on the TV model This service or some of functions of it may be not available in some countries or region Availability of recommended content depends on the specific model and area Smart Hub s On TV panel lets you view programme lists for recommended channels while watching TV You can then switch to a programme in the recommendation list or set up Schedule Viewing Schedule Recording for an upcoming programme Before you use On TV check if the TV is connected to the Internet The TV must be connected to the Internet in order to use On TV The channels or programmes recommended by On TV may differ from the actual ones depending on the broadcast information provider Select a desired programme from the recommendation list You can watch the se
41. the Recording and Schedule Recording Functions 204 Before the Using Timeshift Function S Recommendation Disclaimer 205 S Recommendation with Voice Interaction 205 S Recommendation Read Before Using 3D Viewing Mode 206 3D Precautions 209 Supported Resolutions for each 3D Mode Read Before Using Voice Motion or Face Recognition 211 Precautions for Voice Motion and Face Recognition 213 Requirements for Using Voice Motion or Face Recognition Read Before Using SAMSUNG APPS Web Browser Restrictions Photo Video and Music File Limitations 218 Storage Device File Transfers 219 Supported External Subtitles 219 Supported Internal Subtitles 220 Supported Image Formats and Resolutions 220 Supported Music Formats and Codecs 221 Supported Video Codecs Restrictions 223 Restrictions to PIP Picture in Picture Read After Installing the TV 224 Picture Sizes and Input Signals 224 Installing an Anti Theft Kensington Lock 225 Read Before Setting Up a Wireless Internet Connection Computer Connection Precautions 226 IBM 226 MAC 227 VESA DMT 228 LED 4500 series 228 IBM 228 MAC 228 VESA DMT Supported Video Resolutions Licence Glossary Availability depends on the specific model and area Samsung Smart TV Smart TV can download applications and explore the internet Connect to the internet to make full use of the TV m a 2 Connecting the TV to the internet 1 Connect the TV to the internet via wi
42. the TV Using Off Timer System gt Time gt Off Timer GYD Set the Off Timer to turn the TV off automatically at a specific time Select System gt Time gt Off Timer The timer configuration window appears Configure the following settings The Off Timer is only available if the Clock has been set e Setup Specify the dates and the duration Use Manual to specify the days of the week e Time Set the time that the TV turns off automatically Using the Screen Burn Protection and Energy Saving Features Preventing Screen Burn System gt Auto Protection Time Still images can leave burned in after images on the screen if left for a long time Use Screen Burn Protection to protect the screen Select System gt Auto Protection Time and then choose a time setting from the list If a still image is shown on the screen for longer than the time you selected the TV will automatically activate Screen Burn Protection to prevent burned in after images that may damage the screen Using Energy Saving Features System gt Eco Solution Eco Solution adjusts the TV s brightness level and prevents overheating to reduce overall power consumption e Energy Saving Select a brightness setting from the list to reduce the TV s power consumption e Eco Sensor A Availability depends on the specific model and area Automatically adjusts the TV s brightness level based on the ambient light level to reduce the TV s power consumption If the Eco
43. the bottom of the screen to access the following options However the available options may vary depending on the broadcast signal e Select All Selects all channels displayed in the Edit Channel screen e Sorting Digital channels only Change the list ordered by Channel Name or Number e Aerial Choose between Terrestrial Cable or Satellite A Availability depends on the specific model and area e Category If you select a Category its channels appear in the list among the TV s channels e Edit Favourites Organise favourites lists to find favourite channels and switch between channels more easily e Rename channel Rename Analogue Channels The new name can be up to 5 characters long e Channel Info Check the information of the channel e Information View detailed information about the current programme Enabling Disabling Password Protection on Channels Broadcasting gt Edit Channel You can lock channels you don t want your children to view A To enable password protection set Channel Lock to On First navigate to Broadcasting gt Channel Lock and set it to On Locking Unlocking Channels Select channels from the Edit Channel screen and then select Lock or Unlock at the bottom of the screen When the password entry window appears enter the password This locks or unlocks the selected channels Edit Channel Number A Availability depends on the specific model and area Broadcasting gt Edit Channel N
44. the website or play an app while viewing the TV If you press the M SCREEN button you can select a function that is supported on Multi Link Screen For more information refer to Multiple Functions on a Single Screen Vas Availability depends on the specific model and area Running Editing Channel Run Edit Channel and go to Broadcasting gt Edit Channel 2 Changing the channel number or name Select Change Number and then change the channel s order in the list To remove channels from the list select the channels using the Samsung Smart Control s touchpad or directional buttons and then delete them Pa faf a fa Ea faf n Ta oeno ua vN a Change Number e gt pn p Change Number Of 3 Sorting the channel list 1 Select a digital channel in the list and then select Options gt Sorting 2 Select a desired method for sorting the list og Oo 0 sf ua fe e a l u om OM he vN O Options Connecting Aerial A Availability depends on the specific model and area Before connecting any external devices and cables to the TV first verify the model number A sticker containing the model number is attached to the back of the TV The connection method varies depending on the model An aerial must be connected to the TV in order to receive broadcast signals ey 3 3 Y An aerial connection is not necessary when a cable box or satellite receiver is used
45. to the Internet 7 Make sure that the Internet LAN cable is connected to the router s external LAN port 2 Check the DNS values in the IP Settings 3 If the problem persists contact your Internet Service Provider Network setup is complete but unable to connect to the Internet If the problem persists contact your Internet Service Provider Troubleshooting Wireless Internet Connectivity Issues Wireless network connection failed Selected wireless router not found Go to Network Settings and select the correct router Unable to connect to a wireless router Check the following 7 Check if the router is turned on If it is turn it off and on again 2 Enter the correct security key if required IP auto setting failed Do the following or configure the IP Settings manually 1 Make sure that the DHCP server is enabled on the router Then unplug the router and plug it back in 2 Enter the correct security key if required 3 If this does not work contact your Internet Service Provider for more information Unable to connect to the network Do the following 1 Check all IP Settings 2 Enter the correct security key if required 3 If this does not work contact your Internet Service Provider for more information Connected to a local network but not to the Internet 1 Make sure that the Internet LAN cable is connected to the router s external LAN port 2 Check the DNS values in the IP Settings 3 If the
46. to your network using PBC Push Button Configuration or a PIN Personal Identification Number WPS automatically configures the SSID and WPA key settings Computer Connection Precautions When you connect your TV to a computer set the computer s video card to one of the standard resolutions listed in the tables below or on the next page The TV will automatically adjust to the resolution you choose Note that the optimal and recommended resolution is 1920 x1080 Choosing a resolution not included in the tables can result in a blank screen or just the power indicator turning on Refer to the user manual of your graphics card for compatible resolutions IBM 720x400 70Hz 31 469 70 087 28 322 a MAC 640x480 1152x870 68 681 75 062 100 000 VESA DMT Heaolu A es ae Clock Frequency reat DotsxLines KHz Hz MHz Vertical 640x480 60Hz 31 469 59 940 25 175 Ea 640x480 72Hz 37 861 72 809 31 500 zg 640x480 75Hz 37 500 75 000 31 500 800x600 60Hz 37 879 60 317 40 000 800x600 72Hz 48 077 72 188 50 000 800x600 75Hz 46 875 75 000 49 500 a 1024x768 60Hz 48 363 60 004 65 000 1024x768 70Hz 56 476 70 069 75 000 1024x768 75Hz 60 023 75 029 78 750 1152x864 75Hz 67 500 75 000 108 000 1280x720 60Hz 45 000 60 000 74 250
47. will overide these settings continue to record and turn off after the recording has ended Before the Using Timeshift Function A USB hard drive with a speed of 5 400rom or above is recommended However RAID type USB hard drives are not supported USB memory sticks or flash drives are not supported The total recording capacity may vary depending on the amount of available hard drive space and the recording quality level If the available storage space falls below 500MB while both the Schedule Recording and Timeshift functions are in progress only the recording will stop The maximum amount of time available for the Timeshift function is 90 minutes The Timeshift function is not available for locked channels A time shifted video is played according to the TV settings Before the Timeshift function can be used the Device Performance Test must be performed on the USB storage device connected to the TV To perform the Device Performance Test select Recorded TV in the On TV panel or USB Drive in the MULTIMEDIA panel and then select the recording device The Timeshift function may be terminated automatically once it reaches its maximum capacity The Timeshift function requires at least 1 5GB of free space available on the USB storage device Launching an app switching to an Analogue channel or changing the TV to a mode that does not support the Timeshift function automatically terminates the Timeshift function The Timeshift operation
48. will resume if the TV is changed back to a digital channel again S Recommendation Disclaimer Availability depends on the specific model and area S Recommendation with Voice Interaction Recommendation given to common speech commands Voice Interaction limited to the official language of the country of purchase Performance may vary based on content availability clarity and volume of your voice and ambient noise levels Strong regional accents may not be recognised Certain Samsung Smart TV features may not be available without express consent to the collection and use of personal information Certain features within S Recommendation require internet access and may not be available based on service provider language dialect and region Visit www samsung com for more information about service operator compatibility Actual remote control may differ from image shown S Recommendation Content recommendations to fit your TV viewing preferences Certain Samsung Smart TV features may not be available without express consent to the collection and use of personal information Certain features within S Recommendation require internet access and may not be available based on service provider language dialect and region Visit www samsung com for more information about service operator compatibility Actual remote control may differ from image shown Read Before Using 3D Viewing Mode Availability depends on the specific model
49. wish to connect to the TV You can only play media files from devices that have been allowed to connect to the TV A i Y f a computer or mobile device requests the multimedia content play the connection allowance confirmation window appears on the TV so that you can easily connect the computer or mobile device When Connected through Home Network DLNA YY SS Y To connect a computer through home network DLNA To connect a mobile device through home network DLNA You may experience compatibility issues when attempting to play media files via a third party DLNA server However the content shared by a computer of a mobile device may not play depending on the encoding type and file format of the content In addition some functions may not be available The multimedia content may not smoothly play depending on the network status If this is the case use a USB storage device Select Network Device in the MULTIMEDIA panel Devices connected to the TV are listed Select a device connected via the home network DLNA Folders and files shared by the selected device will be listed Select a media content you wish to play from the list This plays the selected content D Y Alternatively move to the media content and press gt to play When Connected through Samsung Link YS Re w Y To connect a computer through Samsung Link To connect a mobile device through Samsung Link However the content shared by a
50. with an HDMI cable Some HDMI cables may not support Anynett If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected please scan for the device again Connect an optical cable to the TV and the receiver ARC enables digital sound to be outputted via the HDMI ARC port However ARC is only available when the TV is connected to an audio receiver that supports ARC am having trouble launching using apps launched an app but it s in English Languages supported by the app may be different from the user interface language How can change the The ability to change the language depends on the service provider language My application is not Check with the service provider working Refer to the help section on the application service provider s website My file won t play Some files can t be This problem may occur with high bitrate files Most files can be played back but played you might experience problems with high bitrate files want to reset the TV Reset Picture Sound Channel Smart Hub and all other Support gt Self Diagnosis Reset Settings S Reset settings except for the network settings to their factory default settings Reset all saved information relating to Samsung accounts Resetting Smart Smart Hub gt Reset 3 H Hub Smart Hub and linked service accounts as well as Smart Hub service agreements and applications Other Issues
51. 0 and type 1 midi midi Seek not supported Available only on USB storage devices Supported Video Codecs Certain files depending on how they were encoded may not play on the TV File Format avi mkv ast WMV mp4 MOV 3gp VrO Mpg Mpeg tS tp trp MOV flv vob svi m2ts mts divx webm Container AVI MKV ASF MP4 3GP MOV FLV VRO VOB PS TS SVAF WebM Video Codecs Motion JPEG HEVC H 265 H 264 BP MP HP DivX 3 11 4 5 6 MPEG4 SP ASP Window Media Video v9 VC1 MVC MPEG2 MPEG1 Microsoft MPEG 4 v1 v2 v3 H 263 Sorrenson Window Media Video v7 WMV1 v8 WMV2 VP6 VP8 Frame Rate Bitrate Resolution fps Mbps 1280x720 30 FHD MAX 30 1920x1080 30 HD MAX 60 1280x720 MAX 30 1920x1080 6 30 20 Audio Codec Dolby Digital LPCM ADPCM IMA MS AAC HE AAC WMA Dolby Digital Plus MPEG MP3 DTS Core LBR G 711 A Law u Law Vorbis Other Restrictions e Codecs may not function properly if there is a problem with the content data e Video content does not play or does not play correctly if there is an error in the content or container e Sound or video may not work if they have standard bit rates frame rates above the TV s compatibility ratings e If the Index Table is wrong the Seek Jump function does not work e When playing video over a network connection the video may not pl
52. 1 minute increments or enter a specific time value to jump to that point in the video Subtitle Turn the subtitles On or Off Subtitle Language Used to change the language This changes the repeat mode Choose Repeat One to repeat playing the current file and Repeat All to repeat playing all files contained in the same folder Used to change the size of the screen The supported picture sizes vary depending on the video Change the Picture Mode setting Used to change the Sound Mode Choose a speaker to play the audio Choose a desired audio language This option works only when the video supports multi track sound Displays detailed information about the current file Managing Recorded Files Availability depends on the specific model and area t gt On TV gt Recorded TV or amp gt MULTIMEDIA gt USB Drive Select Recorded TV at the bottom of the On TV screen or USB Drive at the bottom of the MULTIMEDIA screen to lock unlock rename delete and generally manage the recording files 7 Run the Smart Hub and then choose Recorded TV from the On TV screen or USB Drive from the bottom of the MULTIMEDIA screen 2 Select a USB recording device A list of recordings appears Saved File List Features e Sorting the Saved File List Sorting with Sort by Select Sort by at the top of the screen and then select a viewing mode The list is sorted based on the selected viewing mode Sorting with Filter Select Filter at the top
53. 98 24 25 29 97 30 50 59 94 60 Digital Channel 1280 x 720p 50 59 94 60 1920 x 1080i 50 59 94 60 Videos Photos Refer to the Photo Video and Music File Limitations section Computer via HDMI Cable The optimal resolution for computers connected to the TV via an HDMI cable is 1920 x 1080 If you select another resolution the TV may not display 3D images correctly and may not be able to display the computer video in full screen Read Before Using Voice Motion or Face Recognition Availability depends on the specific model and area Precautions for Voice Motion and Face Recognition Face Recognition e This product saves thumbnail images of users faces for use during the Face Login e Logging into the Smart Hub via Face Recognition may be less secure than logging in using an ID and password Using the TV Camera e Under some circumstances and under certain legal conditions the use misuse of the TV camera may result in illegal actions There may be obligations under local privacy laws regarding the protection of individuals concerning personal data and on the free movement of such data and possibly other laws including criminal laws regulating camera surveillance both in the workplace and elsewhere e By using the TV camera users agree that it will not be used i in locations where cameras are generally prohibited such as bathrooms locker rooms or changing rooms ii in any manner that will
54. AGES READ THE FOLLOWING CAUTIONS BEFORE YOU OR YOUR CHILD USE THE 3D FUNCTION Adults should frequently check on children who are using the 3D function If there are any complaints of tired eyes headaches dizziness or nausea stop the child from viewing the 3D TV and ensure that they rest Do not use the 3D glasses for other purposes such as general wear sunglasses protective goggles etc Some viewers may experience discomfort such as dizziness nausea and headaches while viewing 3D TV If you experience any of these symptoms stop viewing the 3D TV remove the 3D glasses and rest for awhile Watching 3D pictures for an extended period of time may cause eye strain If you experience any eye strain stop viewing the 3D TV remove the 3D glasses and rest for a while Do not use the 3D function or 3D glasses while walking or moving around Using the 3D function or 3D Active Glasses while moving around may result in injury from running into objects tripping and or falling Do not sleep with the 3D glasses on You can damage or break the temples The temples on your 3D glasses are not foldable Forcing the temples to fold will damage the 3D glasses With SSG 3570 model glasses do not shake your 3D glasses repeatedly Shaking the glasses will power them on and can cause the battery to discharge faster than it would normally With SSG 5100GB model glasses there is a danger of explosion if the battery is incorrectly replaced Wi
55. G APPS screen select Most Popular What s New or Categories A The Most Popular and What s New show the most popular and newest Samsung Apps To view the entire app list select Categories You can view all Samsung Apps classified by genre Move the focus to an app and press and hold the Enter button A pop up menu appears On the pop up menu on the screen select Download A While an app is being installed the progress bar appears at the bottom of the app icon so that you can easily figure out the installation progress The selected app is installed on the TV A You can view installed apps on the SAMSUNG APPS screen Installing an App from the Detailed App Information Screen 1 On the SAMSUNG APPS screen select Most Popular What s New or Categories A The Most Popular and What s New show the most popular and the newest Samsung apps To view the entire app list select Categories You can view all Samsung Apps by category Select an app from the list Detailed information about your selection appears on the screen Select Download on the detailed information screen to install the selected app on the TV A When an app is being installed a progress bar appears underneath the app icon When the installation is complete the Download button turns to Open A You can view installed apps on the SAMSUNG APPS screen Launching an App Select an app on the SAMSUNG APPS screen to launch it The icons indicate the following
56. Internet This functionality is not available with wireless routers that do not support WPS Check to see if your wireless router supports WPS Setting the Network Type to Wireless automatically displays a list of available wireless networks 2 Select WPS PBC and then press the WPS or PBC button located on the wireless router within two minutes 3 The TV exchanges the network name SSID and security key automatically and then attempts to connect to the Internet A confirmation message appears once a connection is established Select OK Troubleshooting Internet Connectivity Issues If you are not able to connect the TV to the Internet read the information below Troubleshooting Wired Internet Connectivity Issues No network cable found Make sure the network cable is plugged in If it is connected make sure the router is turned on If it is on try turning it off and on again IP auto setting failed Do the following or configure the IP Settings manually 7 Ensure that the DHCP server is enabled on the router and reset the router 2 If this does not work contact your Internet Service Provider for more information Unable to connect to the network Do the following 1 Check all IP Settings 2 Ensure that the DHCP server is enabled on the router Then unplug the router and plug it back in 3 If this does not work contact your Internet Service Provider for more information Connected to a local network but not
57. Multiroom Link Surround Set numbers of Samsung Multiroom Link compatible speaker s in a space and enjoy surround system Multiroom Configure the Samsung Multiroom Link compatible speaker so that all play the same combined audio Channels are ignored SoundBar Surround If you have connected a Sound Bar set SoundBar Surround to rear speakers The Sound Bar already includes the Center and Front Left and Right channels Volume Level Adjust the volume of each speaker individually or all speakers at once Speaker Test Send a test sound to each speaker to make sure your system is working properly Edit Name You can give each speaker a name Enabling the Sound Additional Settings Sound gt Additional Settings Configure additional settings for optimum audio output e DTV Audio Level Digital channels only The TV cannot freely control the volume of the digital audio that it sends to the AV receiver Use this to set the digital audio volume at a comfortable level A According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and 0dB A To increase or decrease the volume adjust between the range 0 and 10 respectively e Audio Format Audio Delay This Smart TV is SPDIF enabled The Sony Philips Digital Interface SPDIF provides digital audio output to speakers and various digital devices including A V Receivers and home theatres Audio Format Selects the Digital Audio output SPDIF form
58. Page Down Scroll web browser pages up down Holding down the Enter key On the Smart Hub screen navigate to an item and hold down the Enter key to display the Options menu A The Options menu depends on the context Changing Keyboards A Availability depends on the specific model and area Select System gt Device Manager gt Keyboard Settings gt Select Keyboard Designate which keyboard to use A Only one keyboard can be used at a time Input Languages Keyboard Type and Switch Language Key Select System gt Device Manager gt Keyboard Settings gt Keyboard Options The following options are available Keyboard Language If the keyboard supports multiple languages choose which language you want to use from the list Keyboard type Specify the type of language selected under Keyboard Language A The Keyboard type list varies depending on which language was selected under Keyboard Language Switch Input Language If the keyboard supports multiple languages choose from the list which key to use to switch between languages Controlling the TV with a Mouse System gt Device Manager gt Mouse Settings This TV can be operated with ease using a mouse instead of a remote control G Certain models do not support USB HID class mice Connecting a Mouse Connecting a USB Mouse Plug the mouse cable into the TV s USB port A connection message appears on the screen Connecting a Bluetooth Mouse A Availabili
59. Select an upcoming programme from the Guide to set up a Schedule Viewing for it e The Programme Info Screen Select INFO to display information about the current programme From the programme information screen select right button to view information about the next programme and press enter to set up a Schedule Viewing or Schedule Recording for the upcoming programme Analogue Channel Schedule Viewing Broadcasting gt Schedule Manager The Schedule Viewing function for programmes on analogue channels can be set up by specifying the time and date 1 Select Broadcasting gt Schedule Manager 2 Select Schedule from the Schedule Manager to bring up a pop up menu Select Schedule Viewing 3 Specify the Aerial Channel Repeat and Start Time options for the programme you want to watch and then select OK to finish Managing the Schedule Viewing List Broadcasting gt Schedule Manager You can change the settings of Schedule Viewing sessions or cancel scheduled sessions altogether Deleting Schedule Viewing Sessions You can delete Schedule Viewing sessions 1 Select Broadcasting gt Schedule Manager 2 Select a session from the Schedule Manager A pop up window appears 3 Select Delete This cancels the selected viewing session Editing Schedule Viewing Sessions 1 You can change the settings of Schedule Viewing sessions Select Broadcasting gt Schedule Manager Select a session from the Schedule Manager A pop u
60. TV may malfunction temporarily depending on the circumstances of the broadcast station or application provider e An application is only available for use on HbbTV when the TV network is connected to an external network The application may malfunction depending on the network conditions e If the current channel is compatible with both the HbbTV and non HbbTV text input modes activate TTX by select TTX key twice Using HbbTV e When the screen indicates with the EY etc that HbbTV is being accessed e Select TTX using the remote once to enter the HbbTV text input mode e Select TTX using the remote twice to enter the non HbbTV text inoput mode Connecting to a TV Viewing Card slot To connect the CI CARD follow these steps Using the Cl or Cl CARD Ss x oc uu m Z 2 Q V To watch paid channels the Cl or Cl CARD must be inserted Turn the TV off to connect or disconnect a CI card If you don t insert the Cl or CI CARD some channels will display the message Scrambled Signal The pairing information containing a telephone number the Cl or CI CARD ID the Host ID and other information will be displayed in about 2 3 minutes If an error message appears please contact your service provider When the configuration of channel information has finished the message Updating Completed is displayed indicating the channel list is updated Requirements You
61. V attempts to connect right away 4 Select Stop when the TV attempts to connect to the network Once the network connection has been interrupted select IP Settings Network Settings Connection verification cancelled Fe len aL Wireless network connection test stopped 5 In the IP Settings screen set the IP setting to Enter manually enter the IP Address Subnet Mask Gateway and DNS Server values and then select OK e Use one of the following methods to enter the numerical values Set the numbers using the a and w buttons Using Samsung Smart Control Press KEYPAD button and enter the numbers directly Using the remote control Enter the numbers directly using numerical button IP Settings JP setting Enter manualy IP Address 0 0 0 0 Subnet Mask 0 0 0 0 Gateway 0 0 0 0 DANE iae Enter manually DNS Server 0 0 0 0 OK 6 The TV attempts to connect to the network again using the specified settings A confirmation message appears once a connection is established Select OK A The network connection speed may differ depending on the DNS server settings A For details on the DNS server settings contact the Internet service provider ISP Connecting to a Wireless Internet Network with WPS Network gt Network Settings With wireless routers that support WPS Wi Fi Protected Setup or PBC Push Button Configuration it s possible to press a button on the router to connect the TV to the
62. a software upgrade Updating Software using a USB connection Support gt Software Update gt Update now 7 Visit Samsung s website on a computer and download the update package to a USB device A Save the update package in the USB device s top level folder Otherwise the TV will not be able to locate the update package Connect the USB device with the update package to the TV 3 Select Support gt Software Update gt Update now The software is updated using the update package on the USB device A DO NOT turn off the TV s power until the upgrade is complete The TV will turn off and on automatically after completing the software upgrade All video and audio settings return to the default settings after a software upgrade Enabling Automatic Software Updates Support gt Software Update gt Auto update If the TV is connected to the Internet the Auto update option upgrades the TV s software while it is in Standby Mode In Standby Mode the TV appears to be turned off but still has access to the Internet This allows the TV to upgrade itself automatically while it is not in use Y This option requires an Internet connection Because the TV s internal processes are operating the screen may emit a faint glow and this may continue for more than 1 hour until the software download is complete If you agree to the Smart Hub terms and conditions Auto update will be set to On If you don t want the TV s software updated automa
63. age at the bottom of the screen A On the My Page screen select the button to view the game controller guide A On the My Page screen select the B button and select a desired sorting criterion This rearranges the list accordingly Updating a Game Select Update Games at top of the My Page screen to update games installed on the TV The Update Games appears only when there is a game that needs to be updated To update games automatically select the button at top of the My Page and set the Auto Update games to On Games will then be updated automatically when an update becomes available Removing a Game 1 Press the 3 button at top of the My Page screen and select Delete 2 Select all of the games you wish to remove To select all games select Select All 3 When the selection is complete select Delete A Navigate the game you wish to remove and press and hold the Enter button Then you can easily remove the game Rating Sharing Reviewing a Game You can rate or share the game through a social network service or send a review to the developer on the detailed information screen A You can rate share review a game only when the game has installed on the TV Using SAMSUNG APPS Panel e Manual Most Popular What s New Categories Actual menu screen may differ depending on the TV model This service or some of functions of it may be not available in some countries or region Smart Hub offers a variety of free
64. alled on a USB device only when the USB device is connected to the TV If the USB device is disconnected during a game playing the game is terminated The game installed on the USB device cannot be played on a different TV or a PC Quickly Installing Games Select All Games from the Games panel navigate to a game from the list and press and hold the Enter button On the All Games screen select the button to view the guide about the game controller A On the All Games screen select the button and select a desired sorting criterion Then the items in the list are accordingly rearranged In the pop up menu select Download The selected game is installed on the TV Installing an App in the Detailed Game Information Screen 1 On the Games panel screen select a game you wish to install If you cannot find a desired game select All Games at the bottom of the screen On the All Games screen select the button to view the guide about the game controller A On the All Games screen select the button and select a sorting criteria The games are sorted according to the criteria On the detailed information page of the selected game select Download When installation is complete the installation complete window appears Launching a Game To run an installed game select Play on the detailed game information screen Managing Downloaded or Purchased Games In Smart Hub move to the Games panel and select My P
65. an instantly record a programme that is being broadcast on a different channel Viewing Detailed Information You can move to the detail information screen about the selected programme Reserving You can set up a Schedule Viewing or Schedule Recording for the programme Viewing Detailed Programme Information 1 Move the focus to a desired programme and press and hold the Enter button The Options menu appears From the Options menu on the screen select Detailed Information The detailed information about the selected programme screen appears You can find more information about the selected programme in the detailed information screen and you can easily use the following functions Moving to a Channel Jump to the selected programme s channel Record You can record the programme This function is only available for programmes that is being broadcasted Reserving Set up a Schedule Viewing or Schedule Recording for the programme A This function is only available for programmes that is being broadcasted e Viewing Related Content View a list of content related to the programme If you select an item from the list the detailed screen of the selected item appears e Rate You can rate the programme e Sharing You can share detailed information about the programme on social networking services Configuring On TV Settings A Availability depends on the specific model and area Smart Hub gt On TV Settings You ca
66. any time while you are viewing Teletext Reveal Displays the hidden text answers to quiz games for example To display the normal screen press it again Cancel Shrinks the Teletext display to overlap with the current broadcast Typical Teletext page Part Contents Selected page number Broadcasting channel identity Current page number or search indications Date and time Text Status information FASTEXT information Getting Support The TV has several built in systems designed for user and TV system support Support through Remote Management Support gt Remote Management If you need assistance with your TV you can use this feature to let Samsung Electronics diagnose your TV remotely You will need to read and agree to the service agreement before using this feature A Samsung Electronics technician will then diagnose repair and update your TV remotely This option requires an Internet connection What Does Remote Service Do Samsung Remote Support service offers you one on one support with a Samsung Technician who can remotely e Diagnose your TV e Adjust the TV settings for you e Perform a factory reset your TV e Install recommended firmware updates How Does it Work Having a Samsung Tech remotely service your TV is easy A Call the Samsung Contact Centre and ask for remote support Open the menu on your TV and go to the Support section Select Remote Management and then rea
67. at The available Digital Audio output SPDIF formats may vary depending on the input source Audio Delay This setting helps correct timing mismatches between the audio and video tracks when you are watching TV and listening to audio through a digital audio device Enabling the feature displays a slide bar that you can use to adjust the delay by up to 250ms e Dolby Digital Comp QAND Some digital TV programmes provide 5 1 channel Dolby audio This TV converts Dolby audio to stereo audio so that it can play the sound through the TV s speakers There are two methods to choose from RF is for better sound at lower volumes and Line is for higher volumes e Auto Volume When you change channels video sources or content Auto Volume automatically adjusts the TV s volume level so that the volume level remains the same for all sources For example if you switch from a streaming video application to a Blu ray player or a favourite TV channel Auto Volume can modify the volume up to 12db to equalise the sound The Auto Volume function has two settings Normal and Night Normal applies a normal level of volume adjustment Night applies a slightly lower volume level and is ideal for late night TV viewing If you want to use the volume control of a connected source device to control the sound deactivate the Auto Volume function When you use the Auto Volume function with a source device the device s volume control may not function properly List
68. ation about the connected devices Anynet HDMI CEC Displays a list of Anynet HDMI CEC compliant devices that are connected to the TV This option is only available with Anynet HDMI CEC set to On Device Format Formats USB recording devices connected to the TV This option is only available when a USB device has been selected Disconnect USB Device Used to safely remove a USB device connected to the TV This option is only available when a USB device has been selected e Universal remote setup Select Universal remote setup on the screen to configure the universal remote function By configuring a universal remote control you can control cable boxes Blu ray players home theatres and other external devices using a single remote control A Availability depends on the specific model and area Inserting Batteries into Samsung Smart Control Availability depends on the specific model and area To use Samsung Smart Control first refer to the figure below and insert batteries into the unit 1 Gently pull on the battery cover s notch and then remove the cover completely once it comes loose Insert 2 AA alkaline batteries making sure to align the positive and negative polarities correctly 3 Place the battery cover on the remote control and insert the top part of the cover into the remote control 4 Press the catches on both sides of the battery cover in the order shown so that the cover is completely a
69. aving has been enabled Try resetting the picture Picture gt Reset Picture If the Picture Size has been set to Screen Fit change the setting to 16 9 Change the cable satellite box resolution If you are using AV composite input connect the video cable yellow to the TV s green component jack If you are using a Component connection make sure that the Component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen If the TV is connected to a cable box try to reset the box Disconnect and then reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes Set the output resolution of the cable box to 1080i or 720p can t hear the sound clearly Testing the Sound Support gt Self Diagnosis gt Sound Test Before you review the list of problems and solutions below make sure that the Speaker Select menu item is set to TV Speaker and then listen to the speakers again If the TV still does not play audio run the Sound Test The Sound Test uses a built in melody to check for sound problems If the TV does not play sound during the Sound Test or the sound is distorted there may be a problem with the TV Contact Samsung s Call Centre for assistance If the TV plays the Sound Test melody without distortion there may be a problem with an external device Please check the connections If the problem persists refer to the external devi
70. ay smoothly because of data transmission speeds e Some USB digital camera devices may not be compatible with the player e HEVC codec is only available in MKV MP4 TS containers Video Decoders e Supports up to H 264 Level 4 1 does not support FMO ASO RS e VC1 AP L4 is not supported e All video codecs excluding WMV v7 v8 MSMPEG4 v3 MVC and VP6 Below 1280x720 60 frame max Above 1280x720 30 frame max e GMC 2 or above is not supported e SVAF supports Top Bottom Side by side and Left Right view sequence types 2 ES e This can only support the BD MVC specifications Audio Decoders e WMA is supported up to 10 Pro 5 1 channels Supports up to the M2 profile e This does not support WMA 10Pro M3 e WMA lossless audio is not supported e OCELP and AMR NB WB are not supported e Vorbis is supported for up to 2 channels e Dolby Digital Plus is supported for up to 5 1 channels e The DTS LBR codec is only available for MKV MP4 TS containers Restrictions Restrictions to PIP Picture in Picture PIP cannot be used while Smart Hub or 3D is active Turning off the TV automatically disables PIP Playing a game or using the karaoke feature on the main screen can result in lower PIP picture quality To watch TV as a picture in picture the main screen s source must be set to Component or HDMI The PIP window supports TV signals only A Availability depends on the specific model and area Read After Installing the TV
71. b Creating a Samsung Account using a Facebook Account A Facebook user can easily obtain necessary information from Facebook and create a Samsung Account 7 Navigate to Smart Hub gt Samsung Account and select Log In Select 4 and select the Create with Facebook 2 3 Enter your Facebook ID and password and select Sign In 4 Agree to use a Samsung Account and select Next 5 Create a Samsung Account according to the instructions on the Create Account screen Once a Samsung Account is created you will be automatically signed in A If you create a Samsung Account using your Facebook account they are automatically linked Signing into Samsung Account Smart Hub gt Samsung Account gt Log In Logging into and Saving a Samsung Account If you haven t logged into your Samsung Account on the TV you must save your Samsung Account on the TV 1 Navigate to Smart Hub gt Samsung Account and select Log In 2 Select and select Sign In 3 Enter your ID and password and then select Sign In A Check the Sign me in automatically option if you wish to log into Smart Hub automatically v i Y if you forgot your password select Reset password to receive password reset instructions via email 4 Select an image to be used as the profile picture The Samsung Account has been saved on the TV 5 Select Done to log into your Samsung Account Easily Logging Into Your Samsung Account Saved on the TV 1 Navigate to Smart H
72. by selecting Clear All in the Smart Hub gt Home Screen Settings menu Moving to the Panel Screen Press the button to open the Home Screen and select the Panel icon On the Panel screen for each service panel the following are available Usability depends on the specific model and local region e A Games Navigate to Smart Hub gt Games to confirm the optimising game apps for Smart TV and detailed information on Smart hub This makes it easier to download and play games In addition you can manage games that you have downloaded or purchased with your Samsung Account SAMSUNG APPS You can enjoy variety of free and paid news sports weather and gaming apps on the TV as you would on a smart phone or tablet e OnTV You can view the current programmes on TV at a glance and view the Programme Recommendations by Channel and Programme Recommendations by Time from the programmes that will be broadcasted In addition you can watch recorded videos e FILMS AND TV SHOWS You can directly purchase and view a movie or TV programme through the app provided by Smart Hub without connecting an external video source such as a DVD or Blu ray player e MULTIMEDIA You can play back photo video and music files from an external storage device or watch recorded videos Using the Smart Hub Tutorial Support gt Smart Hub Tutorial From the Support menu select Smart Hub Tutorial This will familiarise yourself with the basics o
73. ce Cl Menu Enables the user to select from the CAM provided menu Select the Cl menu based on the menu PC Card CAM video transcoding You can configure the setting to transcode the video codec from the CAM automatically Turn it Off if you do not want to use it A You must use a CAM that supports video codec transcoding Application Info View information about the CAM inserted into the CI slot and about the Cl or Cl CARD inserted into the CAM You can install the CAM any time with or without the TV turned on Purchase a CI CAM module at your nearest dealer or by phone Firmly insert the Cl or Cl CARD into the CAM in the direction of the arrow Insert the CAM with the CI or Cl CARD into the common interface slot in the direction of the arrow so that it aligns parallel with the slot Check if you can see a picture on a scrambled signal channel CICAM PIN Manager Manage CICAM Common Interface Common Access Module PIN Save PIN or change stored PIN and then set other PIN options Changing the Picture Mode and Adjusting the Picture Quality Choosing the Right Picture Mode for the Viewing Environment Picture gt Picture Mode The following picture modes utilise different contrast and brightness settings to provide the best viewing experience for the environment 4 When connected to a PC via an HDMI to DVI cable only the Standard and Entertain modes can be chosen Dynamic If the ambient lighti
74. ce s user manual If you can t hear the melody or there is a problem make sure Sound gt Speaker Settings gt TV Sound Output is set to TV Speaker and then try again If the problem persists there may be a problem with the TV Contact Samsung s Call Centre for assistance If the melody is played there may be a problem with the external device Please check the connections If the problem persists refer to the external device s user manual The Problem There is no sound or the sound is too low at maximum volume The picture is good but there is no sound The speakers are making an odd sound Try this Check the volume control of the device cable satellite box DVD Blu ray etc connected to your TV Set Sound gt Speaker Settings gt TV Sound Output to TV Speaker If you are using an external device check the device s audio output option For example you may need to change your cable box s audio option to HDMI if the box connected to your TV is using an HDMI cable To listen to the computer sound connect the external speaker to the computer s audio output connector If your TV has a headphone jack make sure there is nothing plugged into it Reboot the connected device by disconnecting and then reconnecting the device s power cable Make sure that the audio cable is connected to the correct audio output connector on the external device For antenna or cable connections check the signal informatio
75. ce This will bring up the Format Device screen and allow you to format the device for TV recordings 3 Once formatting is complete the USB device is tested to see if it has been properly formatted You will be able to start using the device after the test is completed If the device fails the test it means that this device cannot be used to record TV Managing USB Recording Devices You can use the following to manage USB recording devices 1 Run the Smart Hub and then choose Recorded TV from the bottom of the On TV screen or USB Drive from the bottom of the MULTIMEDIA screen A list of connected devices appears A list of connected devices appears Select a USB recording device from the list The list of recordings contained on the device appears Select Options from the top of the screen and then Manage Devices The Manage Devices screen appears The following options are available from the Manage Devices screen Format Device Formats the USB device for TV recordings Check Device Check the malfunctions of USB device If the USB have a problem try to recover Device Performance Test Tests the performance of the USB device This test tells you whether the USB device can be used for TV recordings Default Recording Device If there are multiple USB recording devices connected to the TV use this option to specify the default device Recording Programmes You can record current and upcoming programmes Instant Recordin
76. ce using the SOURCE button Connecting External Input Before connecting any external device or cable to the TV first verify the TV s model number A sticker containing the model number is attached to the back of the TV The connection method varies depending on the model Refer to the diagram and connect the AV cable to the TV s AV input connectors and the device s AV output connectors If you are using the TV s AV input connectors connect the video cable to the Y connector Some models feature a video connector as well In this case connect the cable to the video connector Once the connection has been made you will be able to select the connected external device using the SOURCE button Connecting SCART A Availability depends on the specific model and area Before connecting any external devices and cables to the TV first verify the model number of the TV you purchased A sticker containing the model number is attached to the back of the TV The connection method varies depending on the model Connect the TV s SCART input connector to the device s SCART output connector using a SCART cable An extra audio connection is not needed because SCART also carries audio G SCART can only carry standard definition video TV Audio through the External Speakers Your TV has a variety of connectors for audio input from devices such as Blu ray players and DVD players and for audio output to such devices as amplifiers Th
77. ch as 12 hours Select System gt Time gt Clock gt Time Offset and offset the clock to the correct time A Time Offset adjusts the time through network connections and is only available if the Clock Mode is set to Auto and the TV is connected to the Internet though a local area network A Time Offset will adjust the time if the TV fails to receive time information through normal digital broadcast signals Setting the Clock Manually Manually enter the time Set Clock Mode to Manual and then select Clock Set to enter the current time and date Clock Set Set the current Date and Time Time Zone Select your time zone This function is only available when the Clock Mode is set to Auto DST Switches the DST Daylight Saving Time function on or off This function is only available when the Clock Mode is set to Auto GMT Selects your time zone When Country is set to others you can use this function Using the Timers Using the Sleep Timer System gt Time gt Sleep Timer QAN This automatically shuts off the TV after a preconfigured period of time Select System gt Time gt Sleep Timer You can set the timer up to 180 minutes in 30 minute increments Turning On the TV using On Timer System gt Time gt On Timer Set the On Timer so that the TV turns on automatically at a chosen time Select System gt Time gt On Timer The timer configuration window appears Configure the following settings The On Timer is
78. ching a recorded programme You can also use the buttons to control the content on an external device Use frequently used functions while watching TV In addition you can use additional functions that may vary depending on the currently running function INFO Shows the information about the current digital broadcast programme or content MENU Displays the menu on the screen Select the speakers which you want to use to listen to the TV s sound To set this option external speakers must be connected to the TV Speaker Settings Display the video from an external device or computer on the main screen and the TV as a picture in picture Button DUAL Web Browser e Manual Sign In ai Ls Description When you press the Dual II button the first time the current dual mode is displayed on the screen Press the Dual II button again to change the dual mode Launch the Web Browser Launch the e Manual Log in or out of Oyour Samsung account Move to the right Move to the left You can move the virtual remote control on the screen Large size Standard size You can resize the virtual remote control on the screen A Alternatively navigate to the System gt Smart Control Settings menu and select and set the Onscreen Remote Size option Touch Sensitivity You can change the touchpad sensitivity G Alternatively navigate to the System gt Smart Control Settings menu and select and set the Touch Sensitivity opt
79. connection Navigate to Network gt Screen Mirroring gt Device Manager to activate Device Manager This displays a list of required mobile devices connection You can allow access or deny connections with mobile devices Connecting Mobile Devices without a Wireless Router Wi Fi Direct Network gt Wi Fi Direct Wi Fi Direct lets you connect mobile devices directly to your TV using wireless technology After connecting a device to the TV using Wi Fi Direct it will be possible to view play video photo and music files from the device on the TV Y The mobile device must support Wi Fi Direct Make sure the mobile device you intend to use supports WI FI Direct 1 Enable Wi Fi Direct on the mobile device and then launch Wi Fi Direct The TV automatically scans for and displays a list of available devices The TV s name also appears on the mobile device 2 Select the device from the list to initiate a connection If a connection request is made by the TV a permission message appears on the mobile device and vice versa 3 Allow the connection This completes the connection process Connecting Samsung Link Samsung Link enables you to view play photo video and music files from a Samsung Link enabled mobile device with ease Also use Samsung Link to play and view the content of a mobile device that has been registered to Samsung Link under your Samsung account even if the mobile device and the TV are not connected to the same rou
80. contained in the specified folder on the TV screen A For more information on using Samsung Link desktop software refer to the software s Help section Connecting Home Network DLNA Quickly access and view play photo video and music files from a computer on the TV screen 1 Connect the TV and the computer to the same router or AP A home network will be configured once the two connections are established A Home Network DLNA enables content sharing between the TV computers and mobile devices connected to the same wired or wireless router 2 From the computer select Control Panel gt Network and Internet gt Network and Sharing Centre gt Change advanced sharing settings and select Choose media streaming options to activate media streaming 3 From the list set TV to Allowed 4 Launch Windows Media Player from the computer select Settings gt Library Management and then add the location where the photo video and music files are saved to view play the files on the TV screen A It will be possible to view play on the screen files moved to Windows Media Player s default folder A As long as File Sharing is activated unauthorised access may be allowed Disable File Sharing if data access is not required Connecting with a Mobile Device Connect mobile device such as a smartphone or tablet to the TV directly or indirectly over a shared network and display the mobile device screen or content on the TV scree
81. d and agree to the service agreements When the PIN screen appears provide the PIN number to the agent The agent accesses your TV Finding the Information You Need for Service Support gt Contact Samsung Use this option to find the support service website s address and contact number your TV s model number your TV s software version the Smart Hub info and other information you need to receive the service support gt Y Press EN to view the open source licence There is a problem with the screen Testing the Picture Support gt Self Diagnosis gt Picture Test Before you review the list of problems and solutions below run the Picture Test to determine if the problem is caused by the TV The Picture Test displays a high definition picture you can examine for flaws or faults If the test picture does not appear or there is noise or distortion the TV may have a problem Contact Samsung s Call Centre for assistance If the test picture is displayed properly there may be a problem with an external device Please check the connections If the problem persists check the signal strength or refer to the external device s user manual A If the test picture does not appear or there is noise or distortion the TV may have a problem Contact Samsung s Call Centre for assistance A If the test picture is displayed properly there may be a problem with the external device Please check the connections If the problem persists
82. d network is not security enabled the TV attempts to connect right away 4 A network connection will be attempted Once a connection is established the TV displays a confirmation message Select OK If the attempt fails try again or connect manually fr a a7 L 1A A A i A BARBnAATFTIRA AN PFR P rh rn nam LEAR Eai EV A n my Ord C i Qn 1 fr pa VAT Ir el cra ayi SA l J p BY COMMCCUMG LO ad WITCICss Vianually Network gt Network Settings With networks that require a static IP address you will need to enter the IP address subnet mask gateway and DNS values manually to connect to the network To get the IP address subnet mask gateway and DNS values contact your Internet Service Provider ISP Refer to the Dynamic versus Static IP Addresses section for more information on dynamic IP and static IP addresses 1 Setting the Network Type to Wireless automatically displays a list of available wireless networks Network Settings Select your network type Leo Wireless network PAN a0 01010 You can connect your TV to the AP0001 internet Please select which Add Network wireless network to use R WPS PBC efresh 2 Select the network SSID you want to connect to If the wireless router doesn t appear in the list select Add Network and enter the network s SSID manually 3 Enter the security key and select OK If the selected network is not security enabled the T
83. d other 3D settings for a custom viewing experience e Adjusting the 3D perspective Select Picture gt 3D gt 3D Perspective Use the adjustment bar shown on the screen to adjust the perspective e Adjusting the 3D Depth Select Picture gt 3D gt Depth Use the adjustment bar shown on the screen to adjust the depth This option cannot be used if 3D mode is set to aa L R or r T B e Reversing the Left Right 3D Images Select Picture gt 3D gt L R Change This option is used to reverse the left and right images e Displaying 3D Content in 2D Select Picture gt 3D gt 3D 2D This option is used to enable 2D viewing of 3D content A This function is not available if 3D mode is set to R Normal or Off Picture Support Functions PIP Broadcast Viewing Picture gt PIP Use the PIP Picture In Picture function to watch TV in a small window while also watching content from a DVD player Blu ray player computer or a different external device in the background Select Picture gt PIP to display the PIP settings window This settings window contains the following options e PIP Activates deactivates PIP e Aerial Select the PIP sub picture broadcast signal e Channel Select the PIP sub picture channel e Size Select the PIP sub picture size e Position Select the PIP sub picture position e Sound Select Select the audio source Changing the Picture Size and Position Choosing the Right Screen Size
84. d the Enter button A pop up menu appears 3 On the pop up menu on the screen select Update apps A pop up window appears 4 Select all the apps you wish to update and then select Update All the selected apps are updated to the latest versions Setting Auto App Update Smart Hub gt Apps Settings To update apps automatically navigate to Smart Hub gt Apps Settings and set Auto update to On The apps installed on the TV are automatically updated as updates become available SAMSUNG APPS Features Smart Hub gt Apps Settings You can configure the features related to the apps installed on your TV Enabling Automatic Tickers You can configure selected tickers to display automatically when the TV is turned on Ticker Service enables you to use other services while watching TV You can receive news stock and weather information and more in real time while watching TV A To use this feature make sure that an app supporting the Auto Ticker function is installed on the TV 1 Navigate to Smart Hub gt Apps Settings and select Auto Ticker A list of installed apps that support Ticker Autorun appears 2 From the list select apps you wish to run automatically when the TV is turned on Setting Push Notification Push notification function enables apps installed on the TV to send alerts and messages to the user 1 Navigate to Smart Hub gt Apps Settings gt Push Notification Settings and set the Push Notification to On 2 Set
85. d to position numbers from PO to P99 You can select a channel by entering the position number in this mode C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel Fine Tuning the Screen Broadcasting gt Channel Settings gt Fine Tune av Available for analogue broadcasts only Analogue pictures can become shaky and full of noise If this happens you can fine tune the signal and or reduce noise to clear up the picture 1 2 Select Channel Settings gt Fine Tune An adjustment bar appears on the screen Make adjustments using the Samsung Smart Control until the picture clears up and then select Save or Close Select Reset to reset the Fine Tune operation Transfer Channel List Broadcasting gt Channel Settings gt Transfer Channel List Imports or exports the channel map When the PIN input screen appears enter the PIN You should connect a USB storage device to use this function e Import from USB Import channel list from USB e Export to USB Export channel list to USB This function is available when USB is connected Delete CAM Operator Profile Availability depends on the specific model and area Broadcasting gt Channel Settings gt Delete CAM Operator Profile Select the CAM operator to delete Satellite System amp y Oo A Availability depends on the specific model a
86. ddress of the web page that you want to add to Approved Sites or select one from the list and delete it A Enabling the Approved Sites feature with no web page listed will restrict access to any web page Private browsing on Private browsing off Enable disable the Private Browsing feature Enabling Private Browsing will not save the browsing history When enabling Private Browsing the icon appears at the start of the address bar PIP Settings Configure the PIP settings This is available only if watching TV in PIP mode Position Select the position of the sub picture Set Search Engine Set the default search engine from the list Web Browser Settings Configure the Web Browser Settings such as browsing behaviors or security Set as homepage Select a web page and set it as the homepage Pop up Block Block or unblock pop up windows Page Block Block or unblock pages such as commercial pages Manage a list of pages to block by entering the address of a web page General Delete browsing history or Internet usage information or reset Web Browser Set Security Mode to On to restrict access by malicious codes or phishing sites Encoding Set the Auto select to On or select an encoding method from the list Pointer Adjust the pointer speed in Pointer Browsing mode or change the link access method Browser Information Check the current version of Web Browser Help This will familiarise yourself with the basics of
87. ded to the TV and position it within 10 cm of the external device s remote control receiver A The colour and design of the IR extender cable may vary depending on the model When you connect the cable you have to match the cable s colour and socket s colour Connect the IR extender cable to the TV s IR output connector as shown in the diagram and place the transmitter end within 10 cm of the external device s receiver pointing in the direction of the remote receiver However there must be no obstacles between the IR extender cable and the external device The presence of obstacles interferes with the transmission of the remote control signal A When you use an external device registered with the Universal Remote Control on the Samsung Smart Control you can use the external device without connecting an IR extender cable However if you want to use an external device using Motion Control or Voice Control be sure to connect an IR extender cable SAMSUNG Controlling External Devices with the TV Remote External Device Registration 1 Turn on the external device to set up the universal remote function for and bring up the Source screen 2 Select E Universal remote setup from the top of the screen This initiates the universal remote setup process 3 Follow the on screen instructions and register the external device Using the TV Remote Registering an external device to the TV remote also registers the connector throug
88. dia Content List Screen TV Control using your Voice 100 Enabling Voice Control 102 Using the Voice Interaction function Interactively TV Control using Motions 103 Testing Ambient Illumination Using the TV Camera 104 Activating Motion Control 107 Motion Control Screen Layout Signing in with Face Recognition 110 Registering Your Face to Your Samsung Account 111 Changing Login Method to Face Recognition 111 Signing into Samsung Account with Your Face TV Viewing and Recording Features Digital Broadcast Information at a Glance 112 Using the Guide 113 Checking the Current Programme Info 113 Change the Broadcast Signal 113 Digital Signal Info and Strength Recording Programmes 114 Creating a USB Recording Device 116 Recording Programmes 117 Buttons and Functions Available While Recording a Programme 118 Managing the Schedule Recording List 119 Viewing Recorded Programmes 122 Managing Recorded Files Setting Up a Schedule Viewing 123 Setting Up Schedule Viewing 124 Managing the Schedule Viewing List Using Timeshift Using the Channel List Registering Removing and Editing Channels 127 Registering and Removing Channels 127 Editing Registered Channels 128 Enabling Disabling Password Protection on Channels 128 Locking Unlocking Channels 128 Edit Channel Number Creating a Personal Favourites List 129 Registering a Channel as Favourites 130 Viewing Favourites List Channels Only 130 Editing a Favourites List
89. e device_name divx file from the computer onto a USB device and then plug the USB device into the TV Play the device_name divx file on the TV to register the TV as a DivX certified device Restoring the TV to the Factory Settings Support gt Self Diagnosis gt Reset This option restores all TV settings excluding the Internet to the factory defaults 1 Select Support gt Self Diagnosis gt Reset The Security PIN entry window appears on the screen 2 Enter the Security PIN and then select Yes All settings are then reset The TV turns off and on again automatically and then displays the Setup screen A For more information on Setup refer to the user manual that came with the TV Turning the TV into a Display Model for retail stores Support gt Use Mode Select Support gt Use Mode gt Store Demo This turns the TV into a display model for use in a retail environment amp Y For all other uses select Home Use A Store Demo should be used in retail environments only With Store Demo certain functions are disabled and the TV automatically resets itself after a certain amount of time Data Service This function may not be available depending on the country Allows the user to use information text still images graphics documents software etc transmitted via broadcast media Auto Run Data Service Broadcasting gt Channel Settings gt Auto Run Data Service Sets whether or not to automatically r
90. e locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under licence Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 dts Premium Sound 5 1 Manufactured under a license from U S Patent No s 5 956 674 5 974 380 5 978 762 6 487 535 6 226 616 7 212 872 7 003 467 7 272 567 7 668 723 7 392 195 7 930 184 7 333 929 and 7 548 853 DTS the Symbol and DTS and the Symbol together are registered trademarks amp DTS Premium Sound 5 1 is a trademark of DTS Inc 2012 DTS Inc All Rights Reserved Studio Sound Manufactured under a license from U S Patent No s 6 285 767 8 027 477 5 319 713 5 333 201 5 638 452 5 771 295 5 970 152 5 912 976 7 200 236 7 492 907 8 050 434 7 720 240 7 031 474 7 907 736 and 7 164 802 DTS the Symbol and DTS and the Symbol together are registered trademarks amp DTS Studio Sound is a trademark of DTS Inc 2012 DTS Inc All Rights Reserved DOLBY DIGITAL PLUS Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories HOM The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
91. e Screen 63 Moving to the Panel Screen 63 Using the Smart Hub Tutorial 63 Resetting Smart Hub Using Smart Hub with Samsung Account 64 Creating a Samsung Account 66 Signing into Samsung Account 67 Linking My Samsung and App Accounts 68 Changing and Adding Information to Samsung Account 68 Deleting All Samsung Accounts from the TV Using the Games Panel 69 Using Pop Up Menu Functions 69 Installing and Running a Game 71 Managing Downloaded or Purchased Games Using SAMSUNG APPS Panel 73 Using Pop Up Menu Functions 74 Installing an App 75 Default Apps 75 Using Web Browser 78 Rearranging Apps on the SAMSUNG APPS Screen 79 Removing an App from the TV 79 Rating Reviewing an App 80 Updating an App 80 SAMSUNG APPS Features Using On TV Panel 84 Using Pop Up Menu Functions 84 Viewing Detailed Programme Information 85 Configuring On TV Settings Using FILMS AND TV SHOWS Panel 87 Using Pop Up Menu Functions 88 Watching a Movie TV Programme 88 Restricting Purchased Content Viewing 89 Rating and Sharing a Purchased Content Playing Photos Videos and Music MULTIMEDIA 91 Playing Media Content from a USB Device 92 Playing Multimedia Content Saved in a Computer Mobile Device 94 Playing Media Content from a Storage Service 95 Buttons and Functions Available while Viewing Photos 96 Buttons and Functions Available while Watching Video 98 Buttons and Functions Available while Playing Music 99 Functions on the Me
92. e USB storage device Recording will stop if the available storage space falls below 50MB while recording is in progress If the available storage space falls below 500MB while both the Schedule Recording and Timeshift functions are in progress only the recording will stop The maximum recording time is 360 minutes A video is played according to the TV settings If the input signal is changed while recording is in progress the screen will go blank until the change is made In this case recording will resume but will not be available Device Performance Test must be performed on the USB storage device connected to the TV before a recording can be made To perform the Device Performance Test select Recorded TV in the On TV panel or USB Drive in the MULTIMEDIA panel and then select the recording device When you make a recording on the Guide or Programme Info screen if the USB storage device has failed in the Device Performance Test the Format Device and Device Performance Test are performed again When using the Record or Schedule Recording function the actual recording may start a second or two later than the specified time If the Schedule Recording function is operating while a recording is being made on an HDMI CEC external device the priority is given to the Schedule Recording Connecting a recording device to the TV automatically deletes abnormally saved recording files If the Off Timer or Auto Power Off has been set the TV
93. e connectors are listed below e ARC Audio Return Channel e Digital Audio Optical There are several issues to bear in mind when using audio input e For better audio quality it is a good idea to use an AV receiver e The number of connectors and their names and locations may vary depending on the model e Refer to the external device s operating manual when connecting it to the TV The number of external device connectors and their names and locations may vary depending on the manufacturer Connecting HDMI ARC Some models may not support ARC Before connecting any external devices and cables to the TV first verify the model number of the TV you purchased A sticker showing the model number is attached to the back of the TV The connection method varies depending on the model ARC Audio Return Channel enables digital sound output using just an HDMI cable However ARC is only available through the HDMI ARC port and only when the TV is connected to an ARC enabled AV receiver The number of connectors and their names and locations may vary depending on the model Connect an HDMI cable to the TV s HDMI ARC connector and the device s HDMI output connector HDMI OUT Connecting Digital Audio Optical A Availability depends on the specific model and area Before connecting any external device or cable to the TV first verify the TV s model number A sticker showing the model number is attached to the back of the
94. e using Face Recognition For more information refer to Read Before Using Voice Motion or Face Recognition To enable Face Recognition first connect the optional TV camera to the TV A The optional TV camera must be connected to the dedicated USB port at the back of the TV No other USB port is available for this purpose Registering Your Face to Your Samsung Account Register your face to your Samsung Account to allow the TV to recognise you by your face Create a new account if you do not already have one First you must sign in with your Samsung Account 1 Navigate to Edit profile Smart Hub gt Samsung Account gt Edit profile and select Register face in the account information screen A To register your face using the Virtual Remote panel press KEYPAD to select your active Samsung Account and then select Edit profile A To register your face using the Games panel of Smart Hub select the currently signed in Samsung Account on the screen and then select Edit profile 2 Read the information displayed in the pop up window select OK and then enter the account password 3 On the face registration screen select Take picture and then align your face with the dotted red line displayed on the screen The dotted line will turn green once your face is recognised A Your entire face must be visible to the camera Make sure the face is brightly lit Shadows prevent the camera from recognising your face accurately A Keep y
95. ed on a computer by connecting the TV and the computer to the same router or AP Connecting HDMI Port Before connecting any external device or cable to the TV first verify the TV s model number A sticker showing the model number is attached to the back of the TV The connection method varies depending on the model For HDMI connection one of the following HDMI cable types is recommended x YY S High Speed HDMI Cable High Speed HDMI Cable with Ethernet Use an HDMI cable with a thickness of 14 mm or less Using a non certified HDMI cable may result in a blank screen or a connection error Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications This TV does not support HDMI Ethernet Channel Ethernet is a LAN Local Area Network built on coaxial cables standardised by the IEEE Some computers do not support HDMI interface depending on its graphics adapter specifications In this case use a DVI to HDMI cable to connect the computer to the TV Refer to the diagram and connect the HDMI cable to the external video device s HDMI output connector and the TV s HDMI input connector HDMI OUT HDMI IN d Once the connection has been made you will be able to select the connected external device using the SOURCE button Connecting HDMI DVI Port If the graphics adapter of your computer does not support HDMI interface connect the computer to the TV w
96. ended e High Speed HDMI Cable e High Speed HDMI Cable with Ethernet HDMI cables have certain requirements Use an HDMI cable with a thickness of 14 mm or less Using a non certified HDMI cable may result in a blank screen or a connection error Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications This TV does not support HDMI Ethernet Channel Ethernet is a LAN Local Area Network built with coaxial cables standardised by the IEEE Refer to the diagram and connect the HDMI cable to the video device s HDMI output connector and the TV s HDMI input connector A The number of connectors and their names and locations may vary depending on the model HDMI OUT HDMI IN y o Once the connection has been made you will be able to select the connected external device using the SOURCE button Connecting Component Before connecting any external devices and cables to the TV first verify the model number of the TV you purchased A sticker containing the model number is attached to the back of the TV The connection method varies depending on the model Refer to the diagram and connect the Component cable to the TV s component input connectors and the device s component output connectors Make sure the cable colours match the connector colours Qao O vwro ee A A Once the connection has been made you will be able to select the connected external devi
97. ening to 3D Audio in 3D Mode Availability depends on the specific model and area Sound gt 3D Audio 3D audio technology provides immersive sound that matches the pop up effect of 3D video by using perspective in the audio depth control Only available in 3D mode Resetting All Sound Settings Sound gt Reset Sound Use to reset all sound settings to the factory defaults Setting the Time and Using the Timer setting the Current Time System gt Time gt Clock Set the clock manually or automatically Once the clock has been set you can select the INFO button to check the current time A The clock must be reset every time the power is disconnected Setting the Clock using Digital Broadcast Info System gt Time gt Clock gt Clock Mode Set Clock Mode to Auto The TV automatically downloads the correct time from a digital channel To enable this option the TV s Antenna jack must be connected to either an antenna or a cable output and must be receiving digital broadcasts The accuracy of the time information received may vary depending on the channel and signal If your TV is connected to a set top box or satellite box using HDMI or Component connections you must set the time manually A Availability depends on the specific model and area if the Clock is Wrong in Auto Mode System gt Time gt Clock gt Time Offset If the time set automatically is incorrect you can offset the clock in 1 hour increments by as mu
98. eo signal 60Hz This frequency is not the same as the frequency of the picture the TV is displaying when Motion Plus is on e LED Clear Motion A Availability depends on the specific model and area Removes drag from fast scenes with a lot of movement to provide a clear picture If LED Clear Motion is On at 60Hz video signal the screen may flicker e Cinema Black In Movie mode this feature dims the top and bottom areas of the video image to provide a more immersive viewing experience A Availability depends on the specific model and area Viewing in 3D Availability depends on the specific model and area Picture gt 3D The 3D option lets you view 3D media content and broadcasts You will need to wear Samsung 3D Active Glasses to play 3D content IR tyoe Samsung 3D Active Glasses and third party 3D glasses are not supported Carefully read the health and safety information concerning 3D viewing before viewing 3D content Refer to the 3D Precautions section for more information Whether 3D video is displayed in true HD is usually determined by the quality of the content Starting 3D 1 Play 3D content or turn on a channel that s showing a 3D broadcast 2 Put the Samsung 3D glasses on and then select 3D 3D viewing is enabled The ideal viewing distance is three times the height of the screen or more 3D images may not appear if you do not adhere to the recommended viewing angle or distance The 3D feature may not
99. eously x To use the Screen Mirroring function the mobile device must support a mirroring function such as AllShare Cast or Screen Mirroring To check whether your mobile device supports the mirroring function please visit the mobile device manufacturer s website The video or audio may intermittently stop depending on network conditions Connecting via a mobile device On the mobile device run Screen Mirroring The mobile device searches for available devices to connect to From the search result list select TV The TV displays a pop up window In the pop up window select Allow to connect the mobile device A All previously allowed mobile devices will automatically connect without needing approval A If you select Deny the device won t appear and can t be activated in this way Navigate to Network gt Screen Mirroring gt Device Manager to allow the previously denied mobile device Not searching for the TV on mobile devices 1 Navigate to Network gt Screen Mirroring to run Screen Mirroring Also you can select Screen Mirroring on a list by pressing SOURCE Run mirroring on the mobile device Display a list while automatically searching for mobile devices Select the TV and it connects automatically A When the mobile devices cannot connect try turning the TV off and on Allow Reject the connection via mobile devices 1 This is only available for watching when mobile devices allow the
100. ertain menu options cannot be used Loading Reference Pages Select w Link from the side of a feature description page to access the corresponding reference page Updating the e Manual to the Latest Version You can update the e Manual in the same way as updating apps 1 Select the e Manual item in the SAMSUNG APPS screen 2 Press and hold the Enter button The Options menu appears 3 From the Options menu on the screen select Update apps A pop up window appears A Update apps is shown on the screen only when an update is required 4 Select e Manual in the pop up window and then select Update You can update the e Manual to the latest version Updating the Software Support gt Software Update Check your TV s software version and upgrade it if necessary If the TV is connected to the Internet TV is set to update software automatically If you don t want to update it automatically set Auto update Software Update gt Auto update to Off Updating Software over the Internet Support gt Software Update gt Update now Select Support gt Software Update gt Update now An online upgrade downloads and installs the upgrade software directly from the Internet This option requires an Internet connection A DO NOT turn off the TV s power until the upgrade is complete The TV will turn off and on automatically after completing the software upgrade All video and audio settings return to the default settings after
101. et recommended text data Delete both the recommended words and the memorised words to clear the list Predict Next Letter Enable disable the Text Prediction feature Enabling the Text Prediction feature eliminates the need to find and select individual character keys To enter the word Internet for example select I A predicted word will then appear next to the key Simply select the predicted word to enter Internet A This feature is limited to words that have previously been added to the dictionary Accented Character Preview Enable disable the Show Accented Letters feature An accented letter is a letter such as or V with a diacritical mark above it Enable the Show Accented Letters feature to enter these kinds of letters Y This is available only with a language that uses diacritical letters Establishing a Wired Internet Connection Connecting the TV to the Internet gives you access to online services and SMART features and lets you update the TV s software quickly and easily through the Internet Connecting a LAN Cable Use a LAN cable A The TV will not be able to connect to the Internet if the network speed is below 10Mbps Use Cat 7 LAN cables to link your TV to the Internet Access Points There are three ways to connect the TV to the Internet Refer to the diagrams and connect the LAN cable to the LAN connector on the back of the TV e External Modem e 1 IP Router External Modem a lt An
102. evice connected to the TV via an HDMI connector e Film Mode Optimises the picture quality for movies Select this mode for watching movies A This feature is only available when watching TV or when the input signal is AV Component 480i 10801 or HDMI 1080i e Motion Plus A Availability depends on the specific model and area Removes blurring and judder from scenes with rapid movement If you select Custom you can configure Blur Reduction and Judder Reduction manually and set LED Clear Motion on for a sharper LED image A The Info screen on your TV displays the resolution and frequency of the incoming signal 60Hz but not the frequency the TV is generating for the image it is displaying by using Motion Plus function A If noise occurs on the screen please set up the Motion Plus to Off If Motion Plus is Custom you can set up the Blur Reduction Judder Reduction LED Clear Motion and Reset manually A If LED Clear Motion is On at 60Hz video signal the screen may flicker Blur Reduction Adjusts the blur reduction level from video sources Judder Reduction Adjusts the judder reduction level from video sources when playing films LED Clear Motion Removes drag from fast scenes with a lot of movement to provide a clear picture Reset Reset the custom settings to the factory defaults A If you have Motion Plus on and then bring up the INFO screen the INFO screen displays the resolution and frequency of the incoming vid
103. f Smart Hub and panels Resetting Smart Hub Smart Hub gt Reset Smart Hub Reset all saved information relating to Samsung accounts and linked service accounts as well as Smart Hub service agreements and applications Using Smart Hub with Samsung Account Samsung Account E Create Account A Actual menu screen may differ depending on the TV model Creating a Samsung Account Smart Hub gt Samsung Account Some Smart Hub services are paid services To purchase such a service the service provider account or Samsung Apps TV account Samsung account is required You can create a Samsung Account using your email address A To create a Samsung Account you must agree to the Samsung Account end user agreement and privacy policy Otherwise you cannot create a Samsung Account You can view the entire content of the agreement by navigating to Smart Hub gt Samsung Account gt Terms and Conditions Privacy Policy A Alternatively you can create a Samsung Account at http content samsung com You can use one ID for both the TV and the website Creating a Samsung Account using Sign Up Samsung Account Menu 7 Navigate to Smart Hub gt Samsung Account gt Create Account and select Create a Samsung account 2 Agree to use a Samsung Account and select Next Create a Samsung Account according to the instructions on the Create Account screen Once a Samsung Account is created you will be automatically logged in to Smart Hu
104. f paired Samsung audio devices Select a device to display its menu options You can activate deactivate the audio device or remove it from the list Add New Device Enables disables SoundShare The connection signals from new devices are ignored if Add New Device is set to Off G When listening to TV audio through a Samsung audio device certain types of content may produce video to audio synching issues Listening to TV Sound through Samsung Multiroom Link compatible Speakers Sound gt Speaker Settings gt TV Speaker gt Multiroom Link Configure this product for connection to a Samsung Multiroom Link compatible speaker and enjoy rich sound A To use this feature at least one Samsung Multiroom Link compatible speaker must be connected A Sound quality may be affected by the condition of the wireless network A Network connection status can be negatively influenced and even can be lost if the network environment getting worse by time A Activating Screen Mirroring disables Multiroom Link A For further details refer to the Multiroom Link manual from the web site www samsung com gt SUPPORT gt Firmware Manuals amp Downloads The audio from each device may lag behind the video and audio of the device which is playing the source contents A While playing the Multi Link Screen you can hear the selected audio Settings Set the configuration of Samsung Multiroom Link compatible speaker s you connected to the TV
105. file systems e After sorting files in the Folder view mode the TV can display up to 1000 files per folder If the USB device contains more than 8 000 files and folders however some files and folders might not be accessible e The PTP pier to pier connection mode is available only for digital cameras If you connect a smartphone or tablet to the TV using PTP mode the TV will not recognise it Storage Device File Transfers Storage device containing media content Target device DLNA Device SugarSync Dropbox SkyDrive Mobile USB Device Device Camera DLNA Device DLNA Device USB Device SugarSync Dropbox SkyDrive USB Device Mobile Device USB Device Supported External Subtitles A Certain files depending on how they were encoded may not play on the TV MPEG 4 Timed ne tet tt feat am sseomensoe me C E Supported Internal Subtitles A Certain files depending on how they were encoded may not play on the TV C anmenn wena tm awene am Supported Image Formats and Resolutions A Certain files depending on how they were encoded may not play on the TV 15360x8640 Supported Music Formats and Codecs A Certain files depending on how they were encoded may not play on the TV mp3 MPEG MPEG1 Audio Layer 3 _ we FLAC FLAC Supports up to 2 channels Supports up to 10 Pro 5 1 channels wma WMA WMA WMA lossless audio is not supported Supports up to the M2 profile Sway wey way Supports type
106. g Press the REC button to begin recording the current programme right away The Instant and Schedule Recording options from the Guide Select a current programme from the Guide and then select INFO You can instantly start recording the programme Alternatively select a programme that will air in the future The Instant and Schedule Recording options from the Programme Info Select INFO to display information about the current programme In the information screen select a programme that is currently airing to start recording it right away Alternatively press lt gt button and select a programme that will air in the future to record it The Schedule Recording option on a Specified Date and Time 1 Select Broadcasting gt Schedule Manager 2 Select Schedule from the Schedule Manager to bring up a pop up menu Select Schedule Recording 3 Specify the Aerial Channel Repeat Start Time and End Time options for the programme you want to record and then select OK to finish Buttons and Functions Available While Recording a Programme Press enter while recording a programme The following buttons will appear as well as the recording progress bar Information This displays detailed information about the programme being recorded Y The programme information may differ depending on the broadcasting signal and may not be available at all for certain programmes Recording Time You can select the recording time Stop Reco
107. ge of the screen The picture is black and white The colour is wrong or missing When changing channels the picture freezes or is distorted or delayed Try this Store displays are all tuned to digital HD high definition channels If you have an analogue cable set top box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality Many HD channels are upscaled from SD Standard Definition content Look for a channel that is broadcasting true HD content e Cable Satellite Subscribers Try HD channels from the channel lineup e fTerrestrial Cable Aerial Connection Try HD channels after running the Auto Tuning function Adjust the cable satellite box s video output resolution to 1080i or 720p The compression of video content may cause picture distortions especially in fast moving pictures from sports programmes and action movies A weak or bad quality signal can cause picture distortions This is not an issue with the TV Mobile phones used close to the TV within 1 m may cause noise in analogue and digital channels If you re using a Component connection make sure that the Component cables are connected to the correct jacks Incorrect or loose connections may cause colour problems or a blank screen Go to the Picture menu and then adjust the Picture Mode Brightness Sharpness and Colour settings See if Energy Saving System gt Eco Sensor gt Energy S
108. gnising twins and people with similar faces as two different individuals Note the following when using Face Recognition Do not cover your face with a hat a pair of sunglasses or your hair Your entire face must be visible to the camera Avoid shadows over your face Shadows prevent the camera from recognising your face accurately Keep your expression as neutral as possible In addition keep your mouth closed and as neutral as possible When you log into your Samsung account your facial expression must be the same as the facial expression you had when you registered Facial expression you had during the registration process Read Before Using SAMSUNG APPS e Due to the product characteristics featured on the Samsung Smart Hub as well as limitations in available content certain features applications and services may not be available on all devices or in all territories Some Smart Hub features may also require additional peripheral devices or membership fees Visit http www samsung com for more information on specific device information and content availability Services and content availability are subject to change without prior notice e Samsung Electronics takes no legal responsibility whatsoever for any interruption of app services caused by the service provider for any reason e Application services may be provided in English only and available content may vary depending on the area e For more informat
109. gnosis gt Signal Information Select Support gt Self Diagnosis gt Signal Information Displays the digital channel s signal information and strength A If your TV is attached to a separate over the air antenna you can use the signal strength information to adjust the antenna for increased signal strength and improved HD channel reception A This is only available for digital channels Recording Programmes g Availability depends on the specific model and area You can record current and upcoming programmes using a USB device instead of a video recorder However this is only available for digital channels The icon appears next to programmes and channels for which a Schedule Recording has been set G We recommend a USB hard disk drive with a minimum speed of 5 400rom for TV recording USB memory sticks are not supported g Read all precautions before using recording Creating a USB Recording Device gt On TV gt Recorded TV or t gt MULTIMEDIA gt USB Drive In order to record programmes on a USB device connected to the TV the device must first be formatted for the TV Use the Format Device option to prepare the USB device Formatting a USB device erases all data contained on the device Back up the data before proceeding Samsung will not be held responsible for damaged or lost files Run the Smart Hub and then choose Recorded TV from the bottom of the On TV screen 2 Select Format and then select Format Devi
110. h which the device is connected Accordingly simply selecting the external device using the SOURCE button makes it possible to control the device using the TV s remote Universal Remote Features 1 2 Press SOURCE to bring up the Source screen Select Universal remote setup from the top of the screen This initiates the universal remote setup process Select an external registered device on the Universal remote setup screen The following options are available Use External Speakers Listen to the audio from the external device through the connected home theater This is available only on the set top box or Blu ray player Link Set top Box Listen to the audio from the set top box through the home theater that is connected to the TV This is available only on the home theater system Link Blu ray Player Listen to the audio from the Blu ray player through the home theater that is connected to the TV This is available only on the home theater system Source Setup Change the TV s input source to your selected external device Sync with TV power Configure the set top box to turn off when the TV is turned off This is available only on the set top box Rename Rename the registered external device up to 15 characters long Delete Remove the registered external device Controlling the TV with a Keyboard System gt Device Manager gt Keyboard Settings You can use a keyboard to control the TV A Certa
111. hange the Voice Guide option s tempo e Pitch Adjust the pitch of the Voice Guide e Description Level Adjust the Voice Guide option to better suit the user s description Level Enabling the High Contrast System gt Accessibility gt High Contrast Navigate to System gt Accessibility and set the High Contrast option to On This option changes major service screens to white text on black background or change the transparent TV menus to opaque so that text can be more easily read A Press and hold the button on the Samsung Smart Control to turn on or off High Contrast Adjusting the Menu Transparency System gt Accessibility gt Menu Transparency Navigate to System gt Accessibility and adjust the opacity level Adjust the menu s transparency G When the High Contrast System gt Accessibility gt High Contrast setting is set to On menu display is automatically set to opaque and you cannot change the Menu Transparency settings Expanding the Smart Hub s Focus Area System gt Accessibility gt Enlarge Navigate to System gt Accessibility and set Enlarge to On This zooms in the focused item when you use Smart Hub A Press and hold the button on the Samsung Smart Control to turn on or off Enlarge Changing the Menu Language System gt Menu Language Select System gt Menu Language and then choose a language from the list Use this option to change the menu language Checking Notifications System gt No
112. he gt button Repeat Set the repeat mode Repeat One repeats the current music file only Repeat All repeats all music files contained in the folder Shuffle Play the music files in order or randomly Select Speakers Choose a speaker to play the audio sound Mode Change the Sound Mode setting Functions on the Media Content List Screen The media content screen for the selected storage device includes the following functions e Filter Use this option to filter the list to see only the photo video or music files contained in the storage device e Sort by Sort the list by content type A This function is not available when Filter is set to All e Options A This function is not available when Filter is set to All Function Description Start the slide show Slide Show This option is available for photo files This option is not available with Sort by set to Folder Play Selected Play only the selected content This function is the same as the Copy function of a computer Use this function to send the media content to another storage device For information on storage devices supported by this feature refer to Storage Device File Transfers Send If the media content s title is being displayed incorrectly you can change the encoding Encoding method G This function is available only for music files Rename Plavlist Rename your playlist G This function is available only when the media conte
113. he browsing history is saved from latest to oldest with the oldest entries being overwritten first Depending on the types of video audio codecs supported it might not be possible to play certain video and audio files while playing Flash content Video sources from PC optimised streaming service providers may not play properly on our proprietary web browser Using the on screen QWERTY keyboard automatically disables PIP Except when entering a URL Photo Video and Music File Limitations e The TV supports MSC Mass Storage Class USB devices only MSC is a class designation for mass USB Drives Types of MSC devices include external hard drives flash card readers and digital cameras USB hubs are not supported These kinds of devices must be connected directly to the TV s USB port The TV may not be able to recognise the USB device or read the files on the device if it is connected to the TV via a USB extension cable Do not disconnect the USB device while transferring files e When connecting an external hard drive use the USB HDD port We recommend that you use an external hard drive with its own power adapter e Certain digital cameras and audio devices may not be compatible with the TV e If there are multiple USB devices connected to the TV the TV might not be able to recognise some or all the devices USB devices that use high power input should be connect the USB 5V 1A port e The TV supports the FAT exFAT and NTFS
114. he channel up down buttons x GS N gt A Favourites list can only be selected if it contains at least one favourites channel Run Channel List Broadcasting gt Channel List Press gt button to select Favourites 1 through Favourites 5 Choose a channel from the selected Favourites list This changes the channels and Channel List changes to the selected Favourites channel Editing a Favourites List Broadcasting gt Edit Favourites You can rename and edit Favourites lists Edit Favourites Features Select Options from the bottom of the Edit Favourites screen to access the following options Copy to Favourites Copy channels from one favourites channels list to another This can only be used when the focus has selected a channel registered to a Favourites list Rename Favourites Rename an existing favourites channels list A This can only be used when the focus has selected a channel registered to a Favourites list Sorting Change the list ordered by Channel Name or Number This function is not available on analogue channel Aerial Choose between Terrestrial Cable or Satellite Availability depends on the specific model and area Edit Channel You can manage the channels saved on the TV Information View detailed information about the current programme Removing Registered Channels from a Favourites List Remove channels from a favourites channels list 1 Select Change Fav at the bottom of the
115. ice Control For more information refer to Read Before Using Voice Motion or Face Recognition A If you use the Voice Control function interactively at least once the TV will change the on screen menu name from Voice Control to Voice Interaction Enabling Voice Control 1 Press the VOICE button on the Samsung Smart Control The microphone icon appears on the screen when Voice Control is enabled 2 Say a command You can use Voice Control to operate the TV when you are watching the TV or other videos A Say the command from 10cm to 15cm away from the microphone on the Samsung Smart Control Voice commands may not be recognised properly if you speak too softly or loudly The optimal volume for voice commands is between 75 dB and 80dqdB Using the Voice Recognition Tutorial Support gt Voice Recognition Tutorial This lets you familiarise yourself with the basics of using Voice Control Run Voice Recognition Tutorial from the Support menu or run Voice Control and say Tutorial Learning Voice Control Basics Y Moving the focus Say Focus left Focus right Focus up or Focus down to move the focus However these commands can only be used in situations when the focus can be moved Selecting an item Say Select to confirm the selection All Voice Commands Say Help to display the complete list of voice commands organised by category Deactivating Voice Control Press VOICE button This terminates Voice Con
116. iguration Protocol DHCP Modems and routers that support DHCP automatically provide the IP address subnet mask gateway and DNS values the TV needs to access the Internet so they do not have to be entered manually Most home networks use a dynamic IP address If the network requires a static IP address enter the IP address subnet mask gateway and DNS values manually when setting up the network connection To get the IP address subnet mask gateway and DNS values contact your Internet Service Provider ISP If the network requires a static IP address use an ADSL modem that supports DHCP ADSL modems that support DHCP also allow static IP addresses Ethernet Ethernet is a LAN Local Area Network that uses coaxial cables standardised by the IEEE Component Connection Component connections are mostly used for game consoles and transmit the video signal by splitting it into a luminance signal Y and two colour signals Pb and Pr The connector is marked as Component IN _ Pr Pb Y on the back of the TV On some devices it is sometimes marked as Cr Cb Y Cb and Cr are the digital conversions of the Pb and Pr signals The connectors are normally colour coded red R blue B and green G and offer the best picture quality possible for an analogue connection
117. iles of the USB device Alternatively if you select a USB device on the Source screen a pop up window appears on the screen so that you can easily navigate the folders and files of the USB device Safely Removing a USB Device 1 Z Press the SOURCE button The Source screen appears Navigate the USB device you wish to remove and press and hold the Enter button An options window appears Select Disconnect USB Device from the list Playing Multimedia Content Saved in a Computer Mobile Device To view a guide about the PC connection select Connecting to PC under Network Device Toviewa guide about a Smartphone or tablet connection select Connect to a Phone under Network Device Allowing Connection with a Computer Mobile Device To play multimedia content in a computer or mobile device on the TV you need to allow the connection with the computer on the TV A You can connect to a computer or mobile device on any DLNA DMC device DLNA DMC function enables users to connect a mobile device to the TV search for multimedia content and control play operations on the TV Select Network Device in the MULTIMEDIA panel Devices connected to the TV are listed 2 Select Options and then Multimedia device settings Devices connected to the TV are listed A Alternatively select Multimedia Device Settings from the Network menu to see the list of the devices connected to the TV URANO 3 Allow connection with the desired device you
118. in models do not support USB HID class keyboards Connecting a Keyboard Connecting a USB Keyboard Plug the keyboard cable into the TV s USB port A connection message appears on the screen Connecting a Bluetooth Keyboard Availability depends on the specific model and area Place the Bluetooth keyboard into the standby status Refer to the keyboard manual for information on putting the keyboard into the standby status Select System gt Device Manager gt Keyboard Settings gt Add Bluetooth Keyboard The Add Bluetooth Keyboard screen will appear and automatically scan for available keyboards if your keyboard was not detected position the keyboard close to the TV and then select Refresh This initiates a scan for available keyboards again Select the Bluetooth keyboard from the scan list and then select Pair and connect A number appears on the screen Enter the number on the Bluetooth keyboard A Select Yes to change the keyboard s options or No to leave them as they are Using the Keyboard Use the following remote features with the USB or Bluetooth keyboard connected to the TV Arrow Keys moving the focus Windows Key MENU Button Menu List Key TOOLS Button Enter Key Select run item ESC RETURN Button Number Keys Number Buttons F1 6 F2 E F3 f F4 m F5 g F6 SOURCE Button F7 CH LIST Button F8 MUTE Button F9 F10 Volume Buttons F11 F12 Channel Buttons Page Up
119. indow that appears on the screen select the Favourites lists you want to copy the selected channels to This copies the selected channels to the selected Favourites lists Copy to Favourites is only available when there are channels in the Favourites list Adding Realism to Sports A Availability depends on the specific model and area System gt Football Mode Football Mode enables optimal picture and sound settings for sports events making them appear and sound as if you were actually there In addition it will be possible to use video recording and time shift functions at the same time while watching a sports event and manually or automatically designated highlight scenes if a recording device is connected to the TV when you are using Football Mode 2 n Y For more information about recording a programme and using a recording device refer to the Recording Programmes section A For more information about the Time Shift feature refer to the Using Timeshift section A Whether Football Mode or Soccer Mode is displayed depends on the area G Using the colour buttons may be restricted in Soccer Mode while using the Data Service Enabling Football Mode System gt Football Mode gt Football Mode Select System gt Football Mode and then set Football Mode to On Picture and sound settings of the TV are automatically optimised for sports events A Enabling Football Mode changes the Picture Mode to Stadium and the S
120. ing the Samsung Logo while Booting System gt General gt Boot Logo Use to enable or disable the Samsung logo display that appears when the TV starts up Enabling the TV to Boot Faster System gt General gt Samsung Instant On A Availability depends on the specific model and area Enable or disable the functionality that enables your TV to turn on quickly Registering the TV as a DivX Certified Device Watching Paid DivX Movies System gt DivX Video On Demand Viewing DivX DRM protected DivX movies on the TV first requires registration of the TV as a DivX certified device D a A amp DRM Digital rights management Digital Rights Management is a digital security measure designed to protect copyright You can watch personally created and free DivX content without registering the TV Visit the DivX website http www divx com and log into your user account before registering the TV as a DivX certified device If you do not have an account please create one Select System gt DivX Video On Demand A window with a registration code appears on the screen Visit the DivX website on a computer and click Register Your Device under Support from the top menu Enter the registration code shown on the TV s screen in the Enter your registration code field Enter the TV s name in the Name your device field and then select NEXT Click DOWNLOAD and save the device_name divx file Transfer th
121. ion Motion Sensitivity Put a finger on the touchpad and move it to adjust the speed of the pointer on the screen Navigate to System gt Smart Control Settings and select Motion Sensitivity to enable this option Universal Remote Setup Moves to the Universal Remote Setup screen Cancel Close the pop up menu Controlling External Devices with the TV Remote Universal Remote Setup System gt Universal Remote Setup A Availability depends on the specific model and area The universal remote control feature lets you control cable boxes Blu ray players home theatres and other external devices connected to the TV using the TV s remote control In order to use the TV s remote control as a universal remote you must first connect the IR extender cable included A You can also use the Anynet HDMI CEC function to operate some external Samsung devices with your TV s remote control without any additional setup Refer to the Using Anynet HDMI CEC section for more information v Certain external devices connected to the TV may not support the universal remote feature Setting Up the Universal Remote Control Before connecting any external devices and cables to the TV first verify the model number of the purchased TV A sticker containing the model number is attached to the back of the TV The connection method varies depending on the model To use the TV remote as a universal remote connect the IR extender cable inclu
122. ion about applications visit the applicable service provider s website e An unstable Internet connection may cause delays or interruptions In addition applications may terminate automatically depending on the network environment If this occurs check your Internet connection and try again e Application services and updates may become unavailable e Application content is subject to change by the service provider without prior notice e Specific services may vary depending on the version of the application installed on the TV e An application s functionality may change in future versions of the application If this occurs run the application s tutorial or visit the service provider s website e Depending on the service provider s policies certain applications may not support multitasking Web Browser Restrictions e Select Web Browser The browsing screen may differ from the one on your computer e The web browser is not compatible with Java applications e You cannot download files If you attempt to download a file you will receive an error message instead e The web browser may not be able to access certain websites e Playing Flash videos may be restricted e E commerce for online purchases is not supported e With websites that have scrollable windows scrolling a window can result in corrupted characters e ActiveX is not supported e Certain options are not accessible in Link Browsing mode Switch to Pointer Browsing
123. is connected the TV speakers are muted and certain Sound options are deactivated g The connectors may not be supported depending on the model Connecting Audio Output A Availability depends on the specific model and area Before connecting any external device or cable to the TV first verify the TV s model number A sticker containing the model number is attached to the back of the TV The connection method varies depending on the model A The connectors names and locations may vary depending on the model Refer to the diagram and connect the audio cable to the TV s audio output connector and the device s audio input connector Connecting to a Computer You can directly connect a computer to the TV or to the network to view the computer screen or content on the TV Connect the computer to the TV as follows Connecting via HDMI Port You can connect the computer to the TV using the HDMI cable to display the computer screen on the TV Connecting with the HDMI DVI Port You can connect a computer to the TV by connecting the computer s DVI port to the TV s HDMI port with the DVI to HDMI cable to display the computer screen on the TV Connecting via Samsung Link Quickly access the photo video and music files saved on a computer on which Samsung Link software is installed even if you do not connect the TV directly to the computer Connecting via Home Network DLNA Quickly access the photo video and music files sav
124. is required to watch a blocked programme The Programme Rating Lock is not available in HDMI or Component mode Enabling Game Mode System gt General gt Game Mode Game Mode optimises the TV s settings for playing video games on a gaming console such as PlayStation or Xbox Requirements e Game Mode cannot be used for normal TV viewing e Connect the gaming console before enabling Game Mode Otherwise the picture quality may suffer e The screen may shake a little e Enabling Game Mode automatically sets the Picture Mode to Standard and the Sound Mode to Movie e louse a different external device first disconnect the game console and disable Game Mode Enjoying Rich Colours and Superior Picture Quality BD Wise vailability depends on the specific model and area System gt General gt BD Wise GAND Connecting a Samsung DVD player Blu ray player or home theatre system that supports BD Wise enables the richest colours and best possible picture quality Enabling BD Wise automatically optimises the TV s resolution Y This feature is only available when the external device is connected via an HDMI cable Enabling Disabling Sound Feedback System gt General gt Sound Feedback Sound Feedback provides audio cues as you navigate through menus and select menu options Locking Unlocking the Panel Keys System gt General gt Panel Lock Use to lock and unlock the TV s front panel buttons Showing Hid
125. ith the DVI Digital Visual Interactive to HDMI cable However DVI to HDMI connection is supported by the HDMI port for DVI only and does not support audio signal transmission To listen to the computer sound connect the external speaker to the computer s audio output connector A For information on resolutions supported by the TV refer to Computer Connection Precautions Refer to the diagram and connect the DVI to HDMI cable to the TV s HDMI DVI port and the computer s DVI output port Once the connection has been made you will be able to select the connected external device using the SOURCE button Connecting Samsung Link Quickly access photo video and music files saved on a computer with Samsung Link software installed Also use Samsung Link to play and view the content of a computer that has been registered to Samsung Link under your Samsung account even if the computer and the TV are not connected to the same router or AP 1 Visit the Samsung content and service portal http link samsung com on a computer and sign into your Samsung account A To install Samsung Link desktop software you will need to first sign into your Samsung account If you don t have a Samsung account create one first 2 Install Samsung Link desktop software When the installation is complete the computer will be registered to Samsung Link 3 Specify the folder you wish to link to the TV You can view and play photo video and music files
126. l System gt Motion Control gt Motion Control To enable Motion Control face the TV camera and raise your hand from a comfortable position with the index finger spreading upwards and move it left or right slowly When your hand is successfully recognised by the TV camera Motion Control is activated and a pointer appears on the screen A If Motion Control is activated a pop up window appears and guides you through basic use of Motion Control A Moving your hand out of the range of the TV camera deactivates Motion Control To reactivate Motion Control simply raise your hand towards the TV camera within 3 seconds The recognition may be terminated if the index finger does not fully spread out or is moved too fast Using Motion Control Tutorial Support gt Motion Control Tutorial This lets you familiarise yourself with the basics of using Motion Control From the Support menu run Motion Control Tutorial G If Motion Control is activated a pop up window appears and guides you through basic use of Motion Control Learning Motion Control Basics The following basic motion control commands are available e Moving the pointer Moving your hand moves the pointer accordingly e Selecting an item Fold and then spread your index finger as if clicking on a mouse You can select a TV menu or run a function Keeping your index finger folded is like holding down the remote control button e Returning to the previous menu
127. lected content is free you can instantly watch the content If the content is a paid content you must first purchase the content in the app In App Purchase A The purchasing procedures on the app may differ depending on the app You may need to log into the app or enter payment information Restricting Purchased Content Viewing Smart Hub gt VOD Rating Lock You can lock content rated as adult content so that children cannot access the content Navigate to Smart Hub and set VOD Rating Lock to On A To turn on or off the VOD Rating Lock the password is required Rating and Sharing a Purchased Content Rating Content 1 Select content in FILMS AND TV SHOWS Detailed information about your selection appears on the screen Select J button on the detailed information screen A pop up window appears You can rate the item using the lt and gt buttons in the pop up window Sharing With SNS 1 Select content in the FILMS AND TV SHOWS Detailed information about your selection appears on the screen Select either EJ or M button in the detailed information screen The login page of the selected SNS appears A If you have linked your Samsung Account to the SNS account you were automatically logged into the SNS account when you logged into your Samsung Account On the SNS login screen enter your SNS ID and password to log into the SNS A If you have linked your Samsung Account to the SNS account you can skip this ste
128. lected programme immediately if it is currently on air or move to the detailed programme information screen if it hasn t aired yet Select KJ from the screen to change the recommended content list For a programme being broadcasted a progress bar appears For an upcoming programme the remaining time to broadcast appears Move to the navigation bar at the bottom of the screen to access the following options Viewing the Programme Schedule of Digital Channels Select Guide at the bottom of the screen to view the programme schedule of each digital channel at a glance You can check the programme schedule and even set up a Schedule Viewing or Schedule Recording A The Guide provides information only about digital channels Analogue channels are not supported Programme Recommendations by Time Select Timeline View at the bottom of the screen to view programme recommendations for different times of the day Popular Videos Select Trending at the bottom of the screen to view the most trendy or popular content in Twitter and set up a Schedule Viewing or Schedule Recording Watching a Recorded Programme Select Recorded TV at the bottom of the screen to watch a recorded programme Using Pop Up Menu Functions Move the focus to a desired programme and press and hold the Enter button The following options are available 4 A y Available functions may differ depending on the selected programme Recording the Current Programme You c
129. lity depends on the specific model and area Samsung Smart Control makes it even easier and more convenient to use the TV Pressing the KEYPAD button displays a virtual remote control that allows you to easily enter digits control content and activate functions on the screen We recommend using Samsung Smart Control at a distance of less than 6m A usable distance may differ depending on the wireless environmental conditions Button Functions Refer to the detailed information about the provided remote control Samsung Smart Controls may vary depending on the specific model Colours and shape may vary depending on the model Th 4l EEYPAD SOURCE VOICE SMART HUE MEMU REC Button TV SEARCH KEYPAD SOURCE a VOICE CZ Mute AD NPV N V lt Touchpad u gt HI gt EN E A D RETURN EXIT SMART HUB GUIDE CH LIST INFO MENU M SCREEN Description Turns the TV on off Press this button to use the search window With the virtual remote control on the screen you can easily enter digits control content and use functions Changes the source Changes the volume Starts voice recognition When the microphone icon appears on the screen say a voice command into the microphone Say Help to learn about basic usage and voice commands Say a voice command 10cm to 15cm from the microphone and at an appropriate volume Turns the sound on
130. lt services will not be available Using the Channel Settings Broadcasting gt Channel Settings Country Area Broadcasting gt Channel Settings gt Country Area GAND Select your country so that the TV can correctly auto tune the broadcasting channels This depends on the country or region When the PIN input screen appears enter your 4 digit PIN number e Digital Channel Change the country for digital channels e Analogue Channel Change the country for analogue channels Manual Tuning Broadcasting gt Channel Settings gt Manual Tuning Scans for a channel manually and stores in the TV If a channel is locked using the Channel Lock function the PIN input window appears This function depends on the country and region When Aerial Source is set to Terrestrial or Cable Digital Channel Tuning Scans for a digital channel Select the New A When selecting Aerial Terrestrial Channel Frequency Bandwidth A When selecting Aerial Cable Frequency Modulation Symbol Rate Select the Search When scanning has finished a channel is updated in the channel list Analogue Channel Tuning Scans for an analogue channel Select the New Set the Programme Colour System Sound System Channel and Search Select the Store When scanning has finished a channel is updated in the channel list Channel mode P programme mode When tuning is complete the broadcasting stations in your area have been assigne
131. m supports Anynet devices only Check if the power cord of the Anynet device is properly connected Check the cable connections of the Anynet device Go to System and see if Anynet HDMI CEC has been set to On Check whether the TV remote control is in TV mode Check whether the remote control is Anynet compatible Anynet may not function when certain functions are operational Channel Search Smart Hub set up etc If you have disconnected and then reconnected the HDMI cable scan for devices again or turn your TV off and on Check if the Anynet device is properly connected to the TV and then navigate to the System menu to see if Anynet HDMI CEC is set to On Once verified select TOOLS button A list appears Select Anynet HDMI CEC from the list and then a device Select View TV from the Anynet menu Select a non Anynet device from the Source list You cannot use the remote control when you are configuring Anynet or switching to a viewing mode Use the remote control after the TV has completed the Anynet configuration or has switched to a viewing mode You cannot use the play function when Setup is in progress Check whether the device supports Anynett Check whether the HDMI cable is properly connected Go to System and see if Anynet HDMI CEC has been set to On Scan for Anynet devices again Anynet devices must be connected to the TV using an HDMI cable Make sure the device is connected to your TV
132. n A low signal level may cause sound distortions Run Sound Test Support gt Self Diagnosis gt Sound Test can t see 3D images clearly Testing 3D Picture Quality A Availability depends on the specific model and area Support gt Self Diagnosis gt 3D Picture Test if you have not paired your 3D glasses with the TV pair them first To test 3D picture quality the TV and the 3D glasses must have been paired Put on the 3D glasses navigate to Support gt Self Diagnosis and select 3D Picture Test The 3D Picture Test displays a high definition picture to examine the 3D screen for flaws or faults If the test fails to identify a problem there may be a problem with an external device or the signal strength A If the test picture does not appear or there is noise or distortion the TV may have a problem Contact Samsung s Call Centre for assistance A If the test picture is displayed properly there may be a problem with the external device Please check the connections If the problem persists check the signal strength or refer to the external device s user manual The Problem The 3D glasses are not working correctly can t see 3D images clearly The batteries in the 3D glasses are flat Try this Make sure the glasses are powered on The 3D feature may not work properly if there is another 3D product or an electronic device running nearby If there is a problem keep other electronic devices as far awa
133. n Connect the mobile device to the TV as follows Mobile Device Screen on TV Screen Mirroring Wirelessly connect the TV to the mobile device with the mirroring function to view the mobile device s screen on the TV A This option is available only with mobile devices that support mirroring Connecting Mobile Devices without a Wireless Router Wi Fi Direct Wi Fi Direct enables you to connect the TV to a mobile device without a router or AP Quickly access and play photo video and music files from a connected mobile device on the TV screen A This option is available only with mobile devices that support Wi Fi Direct Connecting via Samsung Link Samsung Link enables you to play photo video and music files from a Samsung Link enabled mobile device without having to manually connect the device to the TV Connecting via Home Network DLNA View play on the TV photo video and music files from a mobile device connected to the same router or AP as the TV Connecting via Smart View 2 0 Install and run the Smart View 2 0 app on your mobile device and connect it to the TV in the same network Mobile Device Screen on TV Screen Mirroring Network gt Screen Mirroring Wirelessly connect a mirroring enabled mobile device to the TV and play the video and audio files stored on the device on the TV Mirroring refers to the function that plays the video and audio files located on a mobile device on a TV and on the mobile device simultan
134. n Picture function to watch TV in a small window while also watching images from an external source such as a DVD player a Blu ray player or a computer in the background Select Picture gt PIP to display the PIP settings window This settings window contains the following options e PIP Activates deactivates PIP e Aerial Select the PIP sub picture broadcast signal e Channel Select the PIP sub picture channel e Size Select the PIP sub picture size e Position Select the PIP sub picture position e Sound Select Select the audio source Scanning for Available Channels A Availability depends on the specific model and area Broadcasting gt Auto Tuning Automatically scans and indexes all channels received through the TV s antenna input connector If there are saved channels this feature deletes the existing list and then saves the newly scanned channels If the TV is connected to a cable box or satellite receiver you do not need to do this Select Broadcasting gt Auto Tuning 2 Select Start when prompted This initiates the Auto Programme function The process can take up to 30 minutes to complete e Auto Tuning Scans for channels automatically and stores them in the TV s memory e Cable Search Option when the aerial was set to Cable A Availability depends on the specific model and area Sets additional search options such as the frequency and symbol rate for a cable network search e Standby Auto Tuni
135. n screen instructions Moving the Focus Pointer Press the directional buttons up down left and right to move the pointer or focus in the direction Menu Access amp Item Selection Press the touchpad This lets you access a TV menu or select an item Displaying the Context sensitive Menu on Smart Hub Press and hold on the touch pad from the Smart Hub screen The Options menu available to the selected item appears A The Options menu depends on the context Moving to the Smart Hub panel On the Smart Hub screen drag left or right on the touchpad This will move the Smart hub panels left or right Scrolling on the Web Browser lt Scrolling up down gt lt Scrolling left right gt Drag up down or left right on the touchpad in the web browser screen This scrolls through the web screen Displaying the Remote Control on the Screen virtual remote control Press the KEYPAD button to display the virtual remote control on the screen You can easily enter digits control content and use TV buttons with the virtual remote control A The virtual remote control buttons may vary depending on the TV s current status Gi NS C e You can directly enter the channel number to switch to that channel Select Pre CH to return to the previous channel e TTX MIX Alternately selects Teletext ON Double Mix or OFF aN A a C 8 Controls the item when you are playing a video photo or music file or wat
136. n set up the signal reception method cable company and other broadcast viewing environment settings for On TV Navigate to Smart Hub gt On TV Settings select Set Up Service Provider settings and set up the broadcast viewing environment settings according to the onscreen instructions Receiving Automatic Notifications You can configure the TV to display a notification when a frequently watched programme is broadcast Navigate to Smart Hub gt On TV Settings and set Automatic Notifications to On Changing Recommendation Type You can choose between personally preferred programmes and programmes preferred by the general public as the type of recommendations you wish to receive Navigate to Smart Hub gt On TV Settings select Recommendation Type and set it to a desired type Removing Adult Content from the Recommended List You can configure this setting so that recommended programmes that are rated for adults are blocked automatically Navigate to Smart Hub gt On TV Settings and set Block Adult Content to On Using FILMS AND TV SHOWS Panel Featured Movies TV Shows Trending Actual menu screen may differ depending on the TV model This service or some of functions of it may be not available in some countries or region Use this feature to purchase and view movies and TV programmes recommended by FILMS AND TV SHOWS without having to use an external device such as a DVD player or a Blu ray player FILMS AND TV SHOWS provide
137. nd area Broadcasting gt Channel Settings gt Satellite System A set of satellite dish settings must be configured for each wanted satellite before performing a channel scan Satellite System is available when Aerial is set to Satellite When the PIN input screen appears enter the PIN e Satellite Selection You can choose the satellites for this TV e LNB Power Enables or disables the power supply for the LNB e LNB Settings Configures the outdoor equipment Satellite Selects the satellite for receiving digital broadcasts Transponder Selects a transponder from the list or adds a new transponder DiSEqC Mode Selects DiSEqC mode for the selected LNB Lower LNB Oscillators Sets the LNB oscillators to a lower frequency Upper LNB Oscillators Sets the LNB oscillators to a higher frequency Tone 22 kHz Selects the Tone 22 kHz depending on the LNB type For a universal LNB it should be Auto Positioner Settings Configures the aerial positioner Positioner Enables or disables the positioned control Positioner Type Sets the positioned type between DiSEqC 1 2 and USALS Universal Satellite Automatic Location System My Longitude Sets the longitude for my location My Latitude Sets the latitude for my location Satellite Longitude Settings Sets the longitude of user defined satellites User Mode Sets the position of satellite aerial according to each satellite If you store the current position of satellite
138. nd set Voice Guide to On A Press and hold the 5 button on the Samsung Smart Control to turn on or off the Voice Guide A The Voice Guide is only provided in the language set in the Menu Language System gt Menu Language However some of the languages are not supported by Voice Guide even though they are listed in the Voice Guide screen If this is the case choose a different language A To change the speaker s gender for the Voice Guide option navigate to System gt Voice Control gt Use TV Voice and change the Voice Gender option A If the Voice Guide is set to On the Samsung Smart Control s motion sensor gyro sensor does not work To use the Samsung Smart Control s motion sensor set the Voice Guide to Off The Voice Guide will give information for the following functions on the TV A Some sub functions or function menus may not provide Voice Guide In this case the TV will tell you that Voice Guide is not provided e Change Channels e Changing TV Volume e Programme Info Window Information e Channel List e Source e Guide e OnTV e Voice Control e TV menu Changing the volume speed pitch and Description Level of the Voice Guide Navigate to System gt Accessibility and then select Voice Guide This changes the volume speed pitch and description level of the Voice Guide e Volume Change the Voice Guide option s volume level The Voice Guide volume may vary depending on the TV volume setting e Speed C
139. news sports weather and gaming content you can install directly on your TV the same way as you would on a smartphone or tablet Before you use SAMSUNG APPS make sure the TV is connected to the Internet Your TV must be connected to the Internet in order to use SAMSUNG APPS Launching Smart Hub for the first time installs the default apps automatically The default apps may differ depending on the region Using Pop Up Menu Functions Move the focus to an app and press and hold the Enter button You can use the following functions e Move Relocates the selected app e Delete Removes the selected app e Delete Multiple Removes multiple apps at once e View Details Move to the detailed information of the selected app e Change view You can change view mode sort by Custom view or Most Played e Lock Unlock You can lock or unlock a selected app from the screen e Update Apps You can update the selected app Installing an App Y x When the TV s internal memory is insufficient you can install an app on a USB device Only when the USB device is connected are the app icons installed on the USB viewable on the SAMSUNG APPS screen You can use an app installed on a USB device only when the USB device is connected to the TV If the USB device is disconnected while the app is running the app is terminated The app installed on the USB device is not available on a different TV or a PC Quick Installation On the SAMSUN
140. ng A Availability depends on the specific model and area Auto tune channels while your TV is in standby mode e Wake up Timer A Availability depends on the specific model and area Schedule timer to turn the TV on and scan channels automatically selecting the Broadcast Audio Options Broadcasting gt Audio Options e Audio Language Digital channels only Change the default value for audio languages Primary Audio Set the primary audio language Secondary Audio Set the secondary audio language The available language may differ depending on the broadcast e Audio Format Digital channels only Change a desired audio format The supported audio format may vary depending on the broadcast programme Audio Description System gt Accessibility gt Audio Description Not available in all locations Digital channels only This function handles the Audio Stream for the AD Audio Description which is sent along with the Main audio from the broadcaster A Audio Description Turn the audio description function on or off A Volume Adjust the audio description volume Genre Selection Broadcasting gt Genre Selection A Availability depends on the specific model and area Turn the channel genre selection feature on or off when using the guide Adult genre enabling Broadcasting gt Adult genre enabling A Availability depends on the specific model and area Enables or disables all adult services When disables adu
141. ng navigate to Support gt Self Diagnosis gt Smart Hub Connection Test Diagnose the problem by checking the internet connection your ISP the Samsung server and the Samsung Apps panels A After completing the test if Smart Hub continues to have problems contact your Internet Service Provider or a Samsung Contact Centre Opening the Home Screen Press while watching TV to open the Home Screen On the Home Screen search through favourites apps channels or sources and access previously run or frequently used functions You can configure the TV to automatically open the Home Screen when it turns on Navigate to Smart Hub gt Home Screen Settings and set Auto Start to On Setting your favourite item 1 Press while watching TV to open the Home Screen and move to a desired item 2 Press and hold the touchpad The Options menu appears 3 In the Options menu select Add to Favourites to add the selected item to the favourite list which will move top of the list A To delete a favourite item select it and tap and hold the touchpad to display the context menu Then select Remove from Favourites Deleting browsing history 1 Press while watching TV to open the Home Screen and select Clear All You will be asked to confirm your selection 2 Select OK on the screen Your browsing history is deleted completely However the Favorites list items will not be deleted A You can also delete your browsing history
142. ng is too bright and makes the screen blurry use this mode to make the picture clearer Standard This is the default mode suitable for most environments Natural This mode is useful for reducing eye strain A Availability depends on the specific model and area Movie Appropriate for darkened rooms for watching movies and when experiencing eye fatigue Darkens the screen and reduces glare Entertain Sharpens images for a more dynamic viewing experience A This mode is only available when connected to a computer via an HDMI to DVI cable Adjusting the Picture Quality for Each Picture Mode Picture gt Backlight Contrast Brightness Sharpness Colour or Tint G R Select one of the settings to display its slide bar Change the adjustment value using lt gt Change the item using A V Adjusted values are applied to the current source and picture mode A The Colour and Tint G R settings cannot be adjusted when the TV is connected to a computer via an HDMI to DVI cable Choose a Picture Mode and then adjust the settings e Backlight Adjusts the brightness of individual pixels Decreasing the brightness reduces power consumption e Contrast Adjusts the screen contrast e Brightness Adjusts the overall brightness e Sharpness Sharpens or dulls the edges of objects Colour GED Adjusts the overall colour saturation Tint G R Adjusts the ratio of green to red Increase the green value to satu
143. ngs Universal Remote Setup Using the Samsung Smart Control Use the buttons to perform actions Move the Samsung Smart Control while touching the touchpad to move the focus 4 Entering option menu using Samsung Smart Control Samsung Smart Controls may vary depending on the specific model After Pressing and holding the MENU button Menu appears automatically After pressing and holding the D button Info appears automatically After Pressing and holding the button Menu appears automatically After Pressing and holding the D button Menu appears automatically For more information refer to Using Samsung Smart Control Availability depends on the specific model and area 1 Activating Football Mode Football Mode enables optimal settings for picture and audio performance making you feel as if you were on the ground of sporting events To record the sports game connect the USB HDD to the TV and go to System gt Football Mode Set Football Mode to On Using Football Mode Press enter while watching a sports game and then press the desired button on the screen Record use social media zoom and save and view highlights For more information refer to Adding Realism to Sports Availability depends on the specific model and area Running Multi Link Screen Press the M SCREEN button 2 Using the Multi Link Screen After selecting the desired screen using Samsung Smart Control search
144. nt is music Delete a playlist that you have created Delete Playlist N es es Y This function is available only for music files Add a file to an existing playlist or create a new playlist Add to Playlist N o Y This function is available only for music files If the content list is too long to navigate efficiently select a letter to quickly skip to Index that section of the list A This is not available when Sort by is set to Folder TV Control using your Voice A Availability depends on the specific model and area System gt Voice Control You can access and select certain menu options and functions using voice commands For more effective voice recognition speak slowly and clearly in the language specified in the System gt Voice Control gt Language option oice Control is classified into two interactive voice control that enables conversational instructions and imperative voice control where only pre defined instructions are used Smart Hub setup and time settings as well as the user s agreement on the use terms Trying the interactive voice control without completing any of these requirements will display a notification pop up Follow the onscreen instructions and complete the necessary settings The imperative voice control is available regardless of the interactive voice control settings Use only pre defined commands in the imperative voice control mode A Please read through the instructions before using Vo
145. nt menu you can manage your Samsung Account To change the account information you must be logged into your Samsung Account 1 Navigate to Smart Hub gt Samsung Account and select Edit profile 2 Enter the password and then select Done The edit profile screen appears The profile editing screen provides the following features e Changing Profile Image If you select Edit Profile Picture on the login screen you can change the profile image e Registering Your Face to Samsung Account If you select Register face on the login screen you can register your face to your Samsung Account The registered face is used by the Sign in Method A This is available only if the optional TV camera is connected to the TV e Choosing a Samsung Account Login Method for TV Select Sign in Method on the login screen and choose a login method You can determine how to log into the TV with the saved Samsung Account e Setting Auto Login Check the Sign me in automatically option if you wish to log into Smart Hub automatically e Entering Basic User Information You can enter your given name surname and date of birth e Receiving e mail about Samsung services You can determine whether to receive e mail about Samsung services Containing the latest information Deleting All Samsung Accounts from the TV Smart Hub gt Samsung Account gt Remove Accounts from TV Navigate to Smart Hub gt Samsung Account and select Remove Accounts from TV The account
146. o load the TV screen on a mobile device share multimedia contents between two devices and control the TV remotely For more information refer to the Smart View 2 0 manual Name of TV on Network Network gt Device Name Choose or enter a TV name to be displayed on the network 1 Select Device Name from the Network menu A list will appear 2 Choose a name from the list Alternatively select User Input to enter a name manually You can view the specified TV name on the network Input Signal Selection You can select a connected external device using the SOURCE button For example to switch to a gaming console connected to the second HDMI connector press SOURCE From the Source list select HDMI2 to change the input signal to HDMI mode Connector names may vary depending on the model The following options are available in the Source screen e TOOLS Button Select a port connected to an external device and press and hold the Enter button The following functions are available A Available options for each connector may vary Edit Name Rename devices connected to the TV for easier identification of external sources For example you can designate a computer connected to the TV via an HDMI DVI cable as DVI PC Alternatively simply designate a computer connected to the TV via an HDMI cable as PC You can also designate an AV device connected to the TV via an HDMI DVI cable as DVI Devices Information View detailed inform
147. o on screen movements to reduce power consumption A This feature is only available when the Picture Mode is set to Standard and is not available in 3D mode A Adjusting the Contrast Brightness and other picture quality settings deactivates the feature Adjusting the Picture for Easier Viewing Picture Options Picture gt Picture Options Select Picture gt Picture Options to make additional adjustments for an easier viewing experience G When the TV is connected to a computer via an HDMI DVI cable only Colour Tone can be adjusted Choose a Picture Mode and then adjust the settings e Colour Tone Adjusts the colour tone The setting is applied on an individual Picture Mode basis When a Picture Mode is changed the corresponding setting will be applied automatically A If the Picture Mode is set to Dynamic you will only be able to choose Cool or Standard e Digital Clean View Reduces static and ghosting caused by a weak signal Selecting Auto Visualisation displays the signal strength at the bottom the screen Green indicates the best possible signal Available for analogue channels only e MPEG Noise Filter Reduces MPEG noise and improves video quality e HDMI Black Level Some external devices connected to the TV via an HDMI cable can have issues such as low black level low contrast and dull colours Use HDMI Black Level to adjust the black level to compensate A This is only available when using an external d
148. o watch Title Set up a timer to record Title Record Title e When you want to know various daily information What s the weather in place name What is the company stock price e When you want programme recommendations Recommend something to me Are there any popular drama genre out e When you want to operate the TV Volume level Channel Number channel name e When you play an app for the camera such as skype or for fitness Camera Fitness Skype e When you log in or out of the Samsung Account Sign In User name Sign Out User name Enabling Disabling TV Voice Enable disable the TV s voice responses to your Voice Control commands Navigate to System gt Voice Control menu and select Use TV Voice Enabling TV Voice in Selected Voice Gender Navigate to System gt Voice Control gt Voice Gender and select a voice gender Enjoy the TV voice in the selected voice gender TV Control using Motions Availability depends on the specific model and area System gt Motion Control Its possible to use motion commands to change channels adjust the volume and control the pointer while searching the web using Smart Hub A TV camera sold separately needs to be connected in order to use Motion Control A The optional TV camera must be connected to the dedicated USB port at the back of the TV No other USB port is available for thi
149. of the screen and then select a filter The list is refreshed to only show files that match the selected filter e Options Function Play Selected Lock Unlock Delete Rename Index Manage Devices Description Select files from the file list and then select Play You can create a playlist To prevent to delete the files recorded program you can lock the files recorded program This locks all the selected files Use this option to unlock any locked files Select the files and then select Unlock This unlocks all selected files Deletes recording files Select the files and then select Delete This deletes all selected files Renames the file Enter the new name using the keypad and then select Done to finish The new name can be up to 29 characters long When navigating a large number of media items select a character Media items starting with that character appear Used to manage USB recording devices connected to the TV Setting Up a Schedule Viewing Configure the TV to show a specific channel or programme at a specific time and date The VE icon appears next to programmes that have been configured for a Schedule Viewing Toset up a Schedule Viewing you must first set the TV s clock Go to Clock System gt Time gt Clock Setting Up Schedule Viewing Digital Channel Schedule Viewing You can set up Schedule Viewing for programmes on digital channels on the following screens e The Guide Screen
150. olls the TV menu or screen up down Exiting the TV Menu or Feature Click on the X button This closes the menu A The X button appears when a mouse is being used Left clicking once while using a feature displays the X button Changing Mice Select System gt Device Manager gt Mouse Settings gt Select Mouse Designate which mouse to use 4 Only one mouse may be used at a time Changing Mouse Buttons and Pointer Speed Select System gt Device Manager gt Mouse Settings gt Mouse Options The following options are available Primary Button Choose which left or right button to use to select and run items Pointer Speed Adjust the movement speed of the pointer that appears on the screen Entering Text Using QWERTY A QWERTY keypad appears when you need to enter text entering the network password logging into your Samsung account etc allowing you to enter text using your remote control Using Additional Functions Select i on the QWERTY keyboard screen The following options are available Recommend text Enable disable the Recommended Text feature Enabling the Recommend text feature allows you to quickly enter text starting with the characters you typed in by displaying recommended words To enter the word Internet for example all you have to do is enter In and select the word Internet from the list of recommended words The word is memorised so that you can enter the same text again more easily Res
151. ome pages may not be displayed You can change Teletext pages by select numeric using your remote control a Teletext on mix off Activates the Teletext mode for the current channel Press twice to overlap the Teletext mode with the current broadcasting screen Press it one more time to exit teletext Store Stores the Teletext pages Size Displays the teletext on the upper half of the screen in double size To move the text to the lower half of the screen press it again For normal display press it once again Hold Holds the display at the current page in the case that there are several secondary pages that follow automatically To undo press it again Colour buttons red green yellow blue If the FASTEXT system is used by the broadcasting company the different topics on a Teletext page are colour coded and can be selected by coloured buttons Press the colour corresponding to the topic of your choice A new colour coded page appears Items can be selected in the same way To display the previous or next page select corresponding coloured button Mode Selects the Teletext mode LIST FLOF If pressed during LIST mode switches the mode to List save mode In List save mode you can save a Teletext page into a list using the store button Sub page Displays the available sub page Page up Displays the next Teletext page Page down Displays the previous Teletext page Index Displays the index contents page at
152. on This option is only available with Picture Size set to Wide Zoom Zoom or Screen Fit When the TV is tuned to a digital channel the screen position cannot be adjusted if the Picture Size is set to Screen Fit 1 To adjust the screen s position select Picture gt Picture Size gt Zoom Position or Position A pop up window appears Select Zoom or Position again from the pop up window 3 Adjust the screen Once done select Zoom or Position and then Close Select Reset to reset the screen position Adjusting the 4 3 Screen Size Picture gt Picture Size gt 4 3 Screen Size Available only when picture size is set to Auto Wide You can determine the desired picture size at the 4 3 WSS Wide Screen Service size or the original size Each European country requires different picture size A Not available in Component or HDMI mode Listening to Audio Only with the Screen Turned Off Picture Off Picture gt Picture Off Turns off the screen and plays audio through the speakers only To turn the screen back on press any button other than the TV and VOLUME buttons Resetting the Picture Mode Settings Picture gt Reset Picture Use this option to reset the current Picture Mode to its factory settings This does not affect the settings of other Picture Modes Changing the Sound Mode and Using Sound Effects Choosing the Right Sound Mode for the Environment Sound gt Sound Mode Sound modes apply preset adjustments to the
153. on and enter the numbers directly Using the remote control Enter the numbers directly using numerical button IP Address 0 0 0 0 Subnet Mask 0 0 0 0 Gateway 0 0 0 0 DARE ae Enter manually DNS Server 0 0 0 0 0 lt 4 Cancel 4 The TV attempts to connect to the network again using the specified settings A confirmation message appears once a connection is established Select OK A The network connection speed may differ depending on the DNS server settings A For details on the DNS server settings contact your Internet service provider ISP Establishing a Wireless Internet Connection Connecting the TV to the Internet gives you access to online services and SMART features and lets you update the TV s software quickly and easily through the Internet Va Connecting to a Wireless Internet Network Automatically Network gt Network Settings Connect the TV to the Internet via a wireless router Make sure you have the wireless router s SSID name and security key settings before attempting to connect The security key can be found on the wireless router s configuration screen 1 On the Network Settings screen set Network Type to Wireless The TV automatically displays a list of available wireless networks 2 Select a network SSID If the network you want doesn t appear in the list select Add Network and enter the network s SSID manually 3 Enter the security key and select Done If the selecte
154. only However Genre can only Beare be used channels contain the genre information r Check the network and make sure the TV is connected to the Internet Your TV needs to be connected to the Internet in order to receive the channel s genre information Edit Favourites Designate favourites channels e Changing to Favourites Press gt button to select Favourites 1 through Favourites 5 This shows the selected list s channels However a Favourites list can only be selected if it contains at least one favourites channel If you haven t created a Favourites list yet you need to create one first Registering Removing and Editing Channels Broadcasting gt Edit Channel Remove channels from the index of channel restore removed channels and rename analogue channels The Edit Channel screen icons indicate the following e A _ An analogue channel e A favourites channel e A locked channel Registering and Removing Channels Broadcasting gt Edit Channel Removing Registered Channels Remove registered channels from the index 1 Select the channels you want to remove Unselect channels by choosing them again To select all the channels select Options from the bottom of the screen and then select Select All from the list 2 Once you have made your selection select Delete from the bottom of the screen to remove the selected channels Editing Registered Channels Broadcasting gt Edit Channel Select Options at
155. or popular Using Pop Up Menu Functions Move the focus to a desired movie or TV programme and press and hold the Enter button The following options are available Available options may differ depending on the selected programme e Instant Content Playing Select an app for the selected content to play it right away If the selected app is not installed a pop up window will appear From the pop up window move to the detailed app information page or install the app Watching a Movie TV Programme 4 If you are using FILMS AND TV SHOWS for the first time or have not logged into your Samsung Account new and popular movies and TV shows will be shown in the FILMS AND TV SHOWS list To view a customised recommendation list in FILMS AND TV SHOWS first log into your Samsung Account You can view a list of frequently played content on FILMS AND TV SHOWS screen in addition to the default recommended content list On FILMS AND TV SHOWS screen select a movie or TV programme you wish to watch Detailed information about your selection appears on the screen On the detailed information screen select an app to play the content This launches the selected app and displays detailed information about the content A If the selected app is not installed a pop up window will appear From the pop up window move to the detailed app information page or install the app You can play the content in the detailed information of the content A If the se
156. orage Service are listed 4 Select the media content you wish to play from the list This plays the selected content A Alternatively move to the media content and press gt to play Buttons and Functions Available while Viewing Photos Press enter to access the following buttons Pressing RETURN hides the playback buttons e Pause Play Start or stop the slide show The slide show feature displays all the photos contained in the selected folder one photo at a time e Previous Next View the previous next photo in the queue e Settings Function Description Speed Set the slide show speed Slideshow Settings o 7 Effects Apply transition effects to the slide show Rotate Rotate the photo Zoom Zoom in by up to a factor of 4 Picture Mode Change Picture Mode Listen to background music while viewing photos A The music file must be located on the same device as the photo files Background Music i n k Amini player appears on the screen when background music is played Use the mini player to pause the music or play a different music file Change Sound Mode Sound Mode oy Oa i A This option is supported only when background music is playing Select Speakers Choose speakers for the background music This function is the same as the Copy function of a computer Use this function to Send send the current photo to another storage device For information on storage devices supported by this feature
157. orted while the video is paused Step 1 Scans the paused video one frame at a time Slow Playback Select to play the video back at 1 4 the normal speed Rewind Fast Forward Slows down or speeds up playback by a factor of up to 5 To restore the normal playback speed press Fast Forward cannot be used while watching the Current Programme Channel List Displays the channel list Tools You can launch the Tools menu Open the Tools menu to access the context menus available in Timeshift mode Using the Channel List Broadcasting gt Channel List Launch the Channel List while watching TV to change channels or to see what s on other channels Select a channel from the Channel List to jump to it right away To quickly scroll through the list use the channel up down buttons This moves the focus one page at a time The Channel List screen contains the following icons A An analogue channel A favourites channel A locked channel Using Options Press lt button to select Options The following options are available Function Description Choose between Terrestrial Cable and Satellite Aerial sis ae las Y Availability depends on the specific model and area Category If you select a Category its channels appear in the list among the TV s channels Sorting Sort the list by Channel Number or by Name Digital channels only Sort the list to include channels of the selected genre
158. ound Mode to Stadium and disables some Picture and Sound menus Press while watching TV to activate deactivate Football Mode If is not available then use TOOLS to activate deactivate Football Mode Extracting Highlights Automatically System gt Football Mode gt Auto Highlights Select System gt Football Mode and set the Auto Highlights to On You can set the TV to automatically save highlights without user intervention However Auto Highlights is not available with these TV operations e Recording two channels simultaneously e When Audio Description is set to On e Switching the input signal using the SOURCE button e When 3D mode is active x The Auto Highlights performance depends on the signal characteristics x It is advisable to use Auto Highlights only while watching a soccer game Using this for other sporting events may display irrelevant picture frames Functions Available in Football Mode Press enter The following buttons will appear Zoom You can pause the current video and zoom in on one of 9 different sections of the screen Pan the zoomed in image using A V lt gt buttons A You cannot use this function when watching a 3D channel or when PIP or MULTIMEDIA is active A When the Data Service is running the Zoom is not available Manual Highlight Pressing this button saves 10 seconds of video leading up to that point and 10 seconds of video that follows as a highlight A This func
159. our expression as neutral as possible In addition keep your mouth closed but at the same time as neutral as possible A Check the box to add password entry to the sign in process using Facial Recognition for additional security Select Try Again to try again 4 On the Samsung Account information screen select Save This completes the face registration process Changing Login Method to Face Recognition To sign in with your Samsung Account using face recognition navigate to Edit profile Smart Hub gt Samsung Account gt Edit profile and change the login method First you must sign in with your Samsung Account 1 Navigate to Smart Hub gt Samsung Account and select Edit profile To register your face using the Virtual Remote panel press KEYPAD to select your active Samsung Account and then select Edit profile To register your face using the Games panel of Smart Hub select the currently signed in Samsung Account on the screen and then select Edit profile 2 Enter the password in the password input box and then select Done The edit profile screen appears Select Sign in Method and change the login method to Face Recognition Select Done Signing into Samsung Account with Your Face 1 Navigate to Smart Hub gt Samsung Account and select Log In Press KEYPAD on Samsung Smart Control and select Sign In to access the Sign In screen From the Games panel of Smart Hub select Sign In Choo
160. p In the pop up window type the article you wish to post to the SNS and select Post The article is posted to the SNS Playing Photos Videos and Music MULTIMEDIA Uw ms 1 Connect a USB Connect a Connect to your Connect a PC GE storage device hi Smartphone Y Bo cloud storage USB Drive Network Device Storage Service Actual menu screen may differ depending on the TV model This service or some of functions of it may be not available in some countries or region You can play media content saved on a USB device smartphone camera computer or Storage Service on the TV You cannot play media content if the content or the storage device are not supported by the TV For more information refer to Photo Video and Music File Limitations Backup important files before connecting a USB device Samsung shall not be held responsible for damaged or lost files Playing Media Content from a USB Device 1 2 Y Y Select USB Drive in the MULTIMEDIA panel USB devices connected to the TV are listed Select the device you wish to access Folders and files of the selected USB device are listed Select the media content you wish to play This plays the selected content A Alternatively move to the media content to play and press the gt button to play the content If you connect a USB device to the TV while watching the TV a pop up window appears on the screen so that you can easily navigate the folders and f
161. p window appears 3 Select Edit and change the settings of the selected session 4 Once finished select OK This applies the changes you made to the selected viewing session Using Timeshift Availability depends on the specific model and area Timeshift lets you pause and rewind live TV as you would a DVD Timeshift is only available for digital channels and activating Timeshift disables the Broadcasting option Timeshift requirements A USB recording device must be connected to the TV in order to use Timeshift We recommend a USB hard disk drive with a minimum speed of 5 400rom for use with the TV s Timeshift feature USB memory sticks are not supported Read all precautions before using the Timeshift function Press gt while watching TV to activate the Timeshift function This activates Timeshift and displays a progress bar and the following buttons at the top of the screen Information Displays detailed information about the current programme A The programme information may vary depending on the type of incoming signal and may not be available at all for certain programmes A This button is only available while watching a live programme Go to Live TV Stop Timeshift Watches the live TV or Exits the Timeshift You can watch the current programme by selecting this button while watching a recorded programme Pause Pauses the screen The following features are available while paused However audio is not supp
162. player s remote control Subtitle Options System gt Accessibility gt Subtitle Select a subtitle mode The list of modes may vary depending on the broadcast e Primary Subtitle Set the primary subtitle language e Secondary Subtitle Set the secondary subtitle language Changing Teletext Language Broadcasting gt Channel Settings gt Teletext Language Availability depends on the specific model and area Use this to set the teletext language e Primary Teletext Set the primary teletext language e Secondary Teletext Set the secondary teletext language Digital Text This function is only available in UK Broadcasting gt Channel Settings gt Digital Text A Availability depends on the specific model and area If the programme broadcasts with digital text this feature is enabled MHEG Multimedia and Hypermedia Information Coding Experts Group An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includes data linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce tele education teleconferencing digital libraries and network games PIP Broadcast Viewing Picture gt PIP Use the PIP Picture I
163. rate the greens and the red value to saturate the reds A Adjusted values are saved by the TV for the current source and picture mode and remain in effect each time the source and picture mode are selected Consequently the TV can have different picture settings for each external source Applying the Current Picture Settings to Other Input Sources Picture gt Apply Picture Mode You can apply the picture quality setting that you configured for the TV to all external devices connected to the TV or to the current source only To apply the setting to all external devices connected to the TV select All Sources To apply the setting to the current input only select Current Source Fine Tuning Each Picture Mode Advanced Settings Picture gt Advanced Settings Select Picture gt Advanced Settings to fine tune how images are displayed on the TV screen for each Picture Mode A Advanced Settings is only available when the Picture Mode is set to Standard or Movie When the TV is connected to a computer via an HDMI DVI cable only White Balance and Gamma can be adjusted Choose a Picture Mode and then adjust the settings Dynamic Contrast Automatically adjusts the screen contrast Use this option to achieve the optimal contrast setting Black Tone Adjusts the black colour depth Flesh Tone Darkens or lightens skin tones RGB Only Mode Adjusts the red green and blue levels individually Colour Space Adju
164. rding Go to Live TV You can stop recording You can watch the live TV while watching a recorded programme Rewind Fast Forward Pressing these buttons decreases or increases playback by up to max 5 steps To restore normal playback speed select Play Pause Play Pause resume video Channel List You can view the channel list Tools You can launch the Tools menu The Tools menu provides functions that you can use while watching a recorded programme Managing the Schedule Recording List Broadcasting gt Schedule Manager You can change the settings of scheduled recording sessions or cancel scheduled sessions altogether Deleting Schedule Recording Sessions You can delete scheduled recording sessions 1 Select Broadcasting gt Schedule Manager 2 Select a session from the Schedule Manager A pop up window appears 3 Select Delete This cancels the selected recording session Editing Schedule Recording Sessions You can change the settings of scheduled recording sessions 1 Select Broadcasting gt Schedule Manager 2 Select a session from the Schedule Manager A pop up window appears 3 Select Edit and change the settings of the selected session 4 Once finished select OK This applies the changes you made to the selected recording session Viewing Recorded Programmes VA Availability depends on the specific model and area t gt On TV gt Recorded TV or t gt MULTIMEDIA gt USB Drive Recorded
165. red or wireless connection 2 Set up Network Settings via Network gt Network Settings je Ie 3 Setting up Smart Hub Smart TV services are available on the 5 Smart Hub panels Before using the Smart Hub set up the area and service provider You can enjoy various services that Samsung has got to offer by following the directions on the screen 4 Using Smart Hub Smart Hub is the heart of this Samsung Smart TV It is divided into 5 panels which are shown at the top of the Smart Hub screen You can access On TV FILMS AND TV SHOWS Games MULTIMEDIA and SAMSUNG APPS Go to Smart Hub gt Apps and download applications from the Samsung Smart TV SAMSUNG APPS nns O Ks TED N w gt ri Vv gt RAEO For more information refer to Smart Hub gt Downloading applications Move the focus to an app and press and hold the touchpad When a pop up menu appears select Download so that you can enjoy the application Availability depends on the specific model and area Setting up Voice Control Some of the functions on this TV can be controlled using your voice Activate Voice Control via System gt Voice Control 2 Using Voice Control Press the VOICE button on the Samsung Smart Control and say Help to display the complete list of voice commands For more information refer to TV Control using your Voice Availability depends on the specific model and area Setting up Motion Con
166. refer to Storage Device File Transfers Information View detailed information about the current photo Buttons and Functions Available while Watching Video Press enter to access the following buttons Pressing RETURN hides the playback buttons Pause Play Pause or play the video When the video is paused you can use the following functions However audio will not be heard while the video is paused Step Press 1 to scan the paused video one frame at a time Slow Motion Select the button to play the video at reduced speed 1 8 1 4 1 2 Rewind Fast Forward Rewind or Fast Forward the video Repeatedly select the button to make the rewind fast forward speed faster by up to 3 times To restore normal playback speed select gt Previous Next Select i44 twice to play the previous video Selecting i44 once reloads the current video from the beginning To play the next video select the button e Settings Function Select Scene Subtitles Repeat Rotate Picture Size Picture Mode Sound Mode Select Speakers Audio Language Information Description Thumbnails Select a scene and play the video from the scene Thumbnails is not available when 1 the thumbnail of the video is not extracted yet 2 the video contains audio only or 3 the video play time is shorter than 60 seconds Chapter Titles Select and play another video in the same folder Time Bar You can use the lt
167. result in an invasion of a person s privacy or iii in violation of any applicable laws regulations or statutes Motion Control Motion Control uses the camera For Motion Control to work you must be within the camera s recognition range The camera s recognition range varies depending on the ambient light level and other factors Run the Motion Control Environment Test before using Motion Control to determine the camera s recognition range You may experience physical fatigue when using Motion Control for extended periods Voice Control Voice Control does not support signs such as the minus symbol and special characters neither a word nor sentence that contains numbers or signs It may be not available for certain languages or dialects or in some areas It also differs in performance depending on the selected language pronunciation voice sound level and ambient noise Voice Text Input requires that you agree to any third party app s voice privacy policy and that you provide Samsung with the your MAC address and other private information Voice Text Input lets you enter text using voice commands instead of a mouse keyboard or remote control This feature is particularly useful for searching browsing the web and using applications You must agree to the following privacy notices before using Interactive Voice Control Voice Recognition Privacy Notice and Nuance Privacy Notice Requirements for Using Voice Motion
168. rnet Using Multi Link Screen requires an Internet connection A Before using Smart Hub with Multi Link Screen go to the On TV Settings Smart Hub gt On TV Settings gt Set Up Service Provider and finish configuring Smart Hub If the Multi Link Screen launches while the TV did not configure the Smart Hub a pop up window appears To use the Multi Link Screen you need to configure the Smart Hub first On the pop up window select the Set Up Smart Hub to finish configuring the Smart Hub Launching Multi Link Screen Picture gt Open Multi Link Screen From the Picture menu select Open Multi Link Screen A Press M SCREEN on the Samsung Smart Control to launch Multi Link Screen Using Multi Link Screen A UHD and FHD contents and channels cannot be viewed simultaneously A Launching Smart Hub while using Multi Link Screen automatically terminates Multi Link Screen A Certain TV features and apps may not be supported by Multi Link Screen If this is the case exit from Multi Link Screen and then use the feature Selecting a Feature 1 Press the Samsung Smart Control s M SCREEN button while Multi Link Screen is running The Options menu appears 2 Select a feature from the Options menu This initialises the selected feature A Features supported by Multi Link Screen vary depending on the country Changing the Channel Volume 7 Place the pointer or focus over the screen for which you want to change the channel or adjust the
169. ry this Change the Use Mode Support gt Use Mode to Home Use The expansion and contraction of the TV s outer casing may cause a popping noise This does not indicate a product malfunction The TV is safe to use Your TV utilises high speed switching circuits and high levels of electrical current Depending on the TV s brightness level the TV may seem slightly noisier than a conventional TV Your TV has undergone strict quality control procedures that meet our demanding performance and reliability requirements Some noise coming from the TV is considered normal and is not an acceptable cause for an exchange or refund Before Using the Recording and Timeshift Functions Availability depends on the specific model and area Before Using the Recording and Schedule Recording Functions To set up a Schedule Recording you must first set the TV s clock Set the Clock System gt Time gt Clock Recordings are DRM protected and therefore cannot be played back on a computer or on a different TV In addition these files cannot be played back on your TV if its video circuit has been replaced A USB hard drive with a speed of 5 400rom or above is recommended However RAID type USB hard drives are not supported USB memory sticks are not supported The total recording capacity may vary depending on the amount of available hard drive space and the recording quality level Schedule Recording requires at least 100MB of free space on th
170. s gt TV Sound Output This lets you choose which speakers the TV uses for audio output To listen to the audio through the speakers of a connected receiver or home theatre only select Receiver or Audio Out To listen to audio through the TV s speakers and the speakers of a connected AV receiver or home theatre simultaneously select TV Speaker If this causes an echo effect choose any speaker option other than TV Speaker to mute the TV speakers or turn off the receiver or home theatre A Using external speakers alone disables the volume button and the mute function In addition certain Sound options will also be disabled Designating the TV s Installation Type Sound gt Speaker Settings gt TV Speaker gt TV Installation Type Specify the TV s installation type Choose between Wall Mount and Stand to optimise the TV s sound automatically Listening to TV Sound through Samsung Bluetooth or Wi Fi Audio Sound gt Speaker Settings gt TV Speaker gt SoundShare Settings Connect the TV to a Samsung audio device for a richer clearer sound This option is only available for Samsung audio devices that support SoundShare You can t use Bluetooth headphones SoundShare Settings and Surround features simultaneously Pair the Samsung audio device using the TV s Bluetooth function Refer to the Samsung audio device s operating manual for more information on pairing e SoundShare Settings Samsung Audio Device List Displays a list o
171. s an easy access to a collection of movies and TV programmes available in Smart Hub Not all the FILMS AND TV SHOWS options may be available depending on the content you are trying to access or your region Before you use FILMS AND TV SHOWS make sure the TV is connected to the Internet The TV must be connected to the Internet in order to use FILMS AND TV SHOWS Select from the screen to change the recommended content list Move to the navigation bar at the bottom of the screen to access the following options Y Tosort the content items in each menu select the button at top of the screen and choose a sorting criteria However depending on the selected menu the B button may not appear Press in each menu s contents list screen to display only movies or TV programmes in the list The button may not be shown depending on the selected menu e Enjoying Featured Movies and TV Programmes Select Featured to view movies or TV programmes selected according to various themes such as movies featuring an actor who went to Hollywood completed TV series and so on e Viewing a Movie Select Movies to view a movie from among the movies listed by new arrival popularity and genre e Viewing a TV Programme Select TV Shows to view a TV show from among the TV shows listed by new arrival popularity and genre e Viewing Hot Movies and TV Shows at a Glance in Real time Select Trending to view movies and TV programmes that are the most trendy
172. s easily crack Because the product can be easily scratched with foreign substances make sure to dust off the cloth before using Do not disassemble or attempt to repair or modify your 3D active glasses by yourself Be careful not to let the temple ends of the 3D active glasses harm your eye Do not sleep with the 3D glasses on You can break the arms Use your hands to put on or remove the 3D glasses Use only the specified standard batteries When replacing the battery insert the battery so that its polarity is correct Failing to do so may damage the battery or result in fire personal injury or environmental damage caused by liquid leaking from the battery applicable to the SSG 5100 only Keep the used battery out of the reach of children so that they do not accidently swallow the battery If your child has swallowed the battery consult your doctor immediately applicable to the SSG 5100 only Swallowing the cylindrical button type battery can cause serious damage to your internal organs If this happens contact a doctor immediately Supported Resolutions for each 3D Mode These specifications apply to the 16 9 display ratio only HDMI e 3D Mode 9 L R FA T B 1280 x 720p 50 59 94 60 1920 x 1080i 50 59 94 60 1920 x 1080p 23 98 24 25 29 97 30 50 59 94 60 Component 1280 x 720p 50 59 94 60 1920 x 1080i 50 59 94 60 1920 x 1080p 23
173. s purpose Y Please note that not all apps support Motion Control Y Please read through the instructions before using Motion Control For more information refer to Read Before Using Voice Motion or Face Recognition Motion Control is not available while Voice Control is activated You can view supported TV camera model at http www samsung com Testing Ambient Illumination Using the TV Camera System gt Motion Control gt Motion Control Environment Test Run this test before using Motion Control to ensure proper functionality 1 Initiate the Motion Control Environment Test and select Start 1 5m to 3 5m away from the TV If the light is reflected onto the TV s screen or there are moving objects in the background the motion may not be properly recognised by the TV 2 Face the TV camera and follow the onscreen instructions to raise your hand from a comfortable position with the index finger spreading upwards and move it left or right slowly A pointer appears on the screen when the TV recognises the action If the recognition fails change the hand position and try again Checking Illumination Motion Control Environment Check Support gt Self Diagnosis gt Motion Control Environment Check Navigate to Support gt Self Diagnosis menu and select Motion Control Environment Check This measures the illumination level around the TV to check if it is suitable for voice and motion control use Activating Motion Contro
174. screen and then change the Favourites list to the Favourites list you want to use 2 Select the channels you want to remove from the selected Favourites list Select Delete Rearranging a Favourites List Rearrange the order of the channels in a Favourites Channels List 1 Select Change Fav at the bottom of the screen and then change the Favourites list to the Favourites list you want to use 2 From the selected Favourites list select the channels you want to rearrange Select Change order from the bottom of the screen and then rearrange the selected channels Press enter to finish Renaming a Favourites List Rename an existing favourites channels list 1 Select Change Fav at the bottom of the screen and then change the Favourites list to the Favourites list you want to use Select Options A list appears Select Rename Favourites from the list A pop up window appears Rename the list in the pop up window The new name can be up to 20 characters long Copying a Favourites List to a Different Favourites List Copy channels from one favourites channels list to another 1 Select Change Fav and then change the Favourites list on the side of the screen to the Favourites list you want to use From the Favourites list displayed on the side of the screen select all the channels you want to COPY Select Options A list appears Select Copy to Favourites from the list A pop up window appears From the pop up w
175. se your Samsung Account 3 Face towards the TV camera If you have set the login method to face recognition the TV will automatically match your face with your Samsung Account If recognition fails try again x x Password entry is required when logging into accounts that have been configured to require password entry during face registration The user s entire face must be visible to the camera Make sure the face is brightly lit Shadows prevent the camera from recognising your face accurately Keep your expression as neutral as possible In addition keep your mouth closed but at the same time as neutral as possible Even if more than one registered face matches your face the TV signs you in with the matching face s account Digital Broadcast Information at a Glance Broadcasting gt Guide The Guide provides an overview of each digital channel s programme lineup You can check the programme schedules and set up a Schedule Viewing or Schedule Recording Press GUIDE to launch the guide The information in the Guide is for digital channels only Analogue channels are not supported Using the Guide Move to the programme schedule and then press and hold the Enter button The following options are available Changing the Channel List If you select Channel Filter you can change the channels displayed in the channel lists Navigating the Programme Schedule Press to the button to navigate the programme
176. second to use additional functions Button Description GUIDE CH LIST Press and hold to launch the CH LIST RETURN EXIT Press and hold this button to exit all currently running applications Press and hold this button to bring up the Accessibility Shortcuts panel Select tz AD the options to turn them on or off B Displays a menu on the screen A Availability depends on the specific Samsung Smart Control Press and hold to record the broadcast G Availability depends on the specific model and area D Press and hold to view information about the current digital channel or media file Using the TV by Moving the Samsung Smart Control The Samsung Smart Control has a motion sensor gyro sensor that allows you to easily control the TV by holding and moving the Samsung Smart Control After placing a finger on the touchpad a pointer appears on the screen Hold and move the Samsung Smart Control The pointer moves the same way the Samsung Smart Control is moved It s also possible to scroll up and down on scrollable screens A If you remove the finger from touchpad the screen pointer disappears A If the Voice Guide is set to On the Samsung Smart Control s motion sensor gyro sensor does not work To use the Samsung Smart Control s motion sensor set the Voice Guide to Off Using the TV with the Touchpad A Navigate to the Support menu and select the Smart Control Tutorial option to learn how to use the touchpad following the o
177. sts the range of colours that can be displayed on screen Auto automatically adjusts the colour space depending on the input signal Native applies a range that is wider than the input signal Custom allows you to adjust the colour space manually The availability of Custom depends on the specific model and area e White Balance QAND Adjusts the colour temperature of the picture to make white objects look white and the overall picture appear natural A Availability depends on the specific model and area 2 Point Adjust each of the 3 colour s luminosity with the offset menu and the brightness with the gain menu To restore the default values select Reset 10 Point Adjust the white balance by adjusting the brightness of each of the 10 sections of red green and blue colours of the input signal To choose a section select a desired section in Level field A You can use the 10 Point function only when the Picture Mode is set to Movie Some external devices may not support this Adjust each colour s luminosity with the offset menu and the brightness with the gain menu To restore the default values select Reset A Availability depends on the specific model and area R Offset G Offset B Offset Adjust each colour s red green blue darkness R Gain G Gain B Gain Adjust each colour s red green blue brightness e Gamma Ge Adjusts the primary colour intensity e Motion Lighting Adjusts the brightness in response t
178. t requests product purchases and other interactions between the viewer and the TV station Generally you will need to set up an account with the broadcaster and log in to the account What is an interactive in order to enjoy the interactive services they offer Note that interactive services are service and how does only available when your TV is connected to the Internet In addition T Commerce it work requires that you have a certificate Copy your certificate from the computer to a USB device and connect that device to the TV Interactive services are not being offered yet The actual service launch date varies depending on the broadcaster A message displays Receiving but no change happens This indicates an error has occurred while receiving data An execution error message will also appear on the screen If this happens try again Nothing appears on the screen after The Data Service may be initialising or the signal may have been severed by the the Data Service is broadcaster launched The Schedule Recording Timeshift function isn t working The Problem The TV cannot recognise the USB device or the Format Device Check Device and Device Performance Test functions fail There is a message saying need to format the USB Drive Schedule Recording cannot be used get a performance test failure message and then Schedule Recording and the Timeshift operation stops working Try this Refer to
179. ter or AP 1 Run the Samsung Link app on the mobile device and then sign in with your Samsung account A To use Samsung Link you have to sign in with a Samsung account If you don t have a Samsung account create one first 2 Quickly access and play photo video and music files from the mobile device running Samsung Link app under your Samsung account A For more information on using the Samsung Link app refer to the Help section of the manual Connecting Home Network DLNA View play photo video and music files from a mobile device on the TV 1 Connect both the TV and the mobile device to the same router or AP A home network will be configured once the connections are established A Home Network DLNA enables content sharing between the TV computers and mobile devices connected to the same wired or wireless router 2 Enable File Sharing on the mobile device The mobile device s shared content can be viewed played on the TV A As long as File Sharing is activated unauthorised access may be allowed Disable File Sharing if data access is not required Connecting via Smart View 2 0 By installing and running the Smart View 2 0 app on the mobile device you can view the device screen on the TV or play the device s multimedia content videos photos and music on the TV Goto Google Play and search for and install Smart View 2 0 on your mobile device Smart View 2 0 is a cross platform multi screen app that enables you t
180. th SSG 5100GB model glasses make sure to replace the battery with the same type A Safety Precautions The following safety instructions are to ensure your personal safety and prevent property damage Please read the following to ensure the proper use of the product Do not place the product in a location exposed to direct sunlight heat fire or water Exposure may result in a product malfunction or fire Do not apply force to the lenses of the 3D glasses Do not drop or bend the product Applying force dropping or bending may result in a 3D glasses malfunction Keep the components of the 3D glasses out of reach of children Especially ensure children do not swallow any of the components If your child swallows a component consult your doctor immediately When cleaning the product do not spray water or cleaner directly onto the surface of the product Spraying water or cleaner directly onto the glasses may result in fire or electric shock damage to the product s surface or cause the indicator labels on the product s surface to come loose Do not apply chemicals containing alcohol solvent or surfactant such as wax benzene thinner pesticide air freshener lubricant or cleaner to the product These chemicals may cause the product s exterior to be discolored or cracked or labels or instructions to be removed Use only a soft cloth such as superfine fibers or cotton flannels for cleaning the product as the surface or the lense
181. the USB device s manual and see if data can be stored on it Check if the USB device is in a locked state Check if the USB device was formatted when it was connected to a computer Formatting a USB device after connecting it to the TV may result in a formatting failure If Device Performance Test or Format Device has failed there may be a problem with the USB device or its specifications Try using a different USB device Check if the USB device is in a locked state Use the USB recovery function to recover the USB device Check if there is a USB device connected to the TV Check if the channel is a digital channel that can be recorded Recording will automatically stop if the signal becomes too weak The Timeshift function will not work if there isn t enough storage space on the USB device This problem can occur when using a low performance USB Drive that does not support recording A USB hard drive with a speed of 5 400rpm or above is recommended A USB memory stick is not supported Anynet HDMI CEC isn t working The Problem Anynet does not work want to start Anynett want to exit Anynett The message Connecting to Anynet device or Disconnecting from Anynet device appears on the screen The Anynet device won t play The connected device is not displayed The TV audio is not being played through the receiver Try this Confirm that the device is an Anynet device The Anynet syste
182. the module if you insert the card before attaching Using the CI or Cl CARD o0000 0 o0o00000000000000000000000000000000000000000 oo0o000000000000000000000000000000000000000000000 3OVIYSLNI NONWOD To watch paid channels the Cl or Cl CARD must be inserted If you don t insert the Cl or Cl CARD some channels will display the message Scrambled Signal The pairing information containing a telephone number the Cl or CI CARD ID the Host ID and other information will be displayed in about 2 3 minutes If an error message appears please contact your service provider When the configuration of channel information has finished the message Updating Completed is displayed indicating the channel list is updated Requirements You must obtain a Cl or Cl CARD from a local cable service provider When removing the Cl or Cl CARD carefully pull it out with your hands since dropping the Cl or Cl CARD may cause damage to it Insert the Cl or Cl CARD in the direction marked on the card The location of the COMMON INTERFACE slot may be different depending on the model Teletext Feature Availability depends on the specific model and area The index page of the Teletext service gives you information on how to use the Service For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or s
183. tically set Auto update Support gt Software Update gt Auto update to Off 1 Select Support gt Software Update gt Auto update 2 Specify when you want the upgrade to take place The TV will connect to the server at the specified time download the update package and upgrade its own software Software update via satellite channel Availability depends on the specific model and area Support gt Software Update gt Manage Satellite Channels When the Aerial was set to Satellite Manage software downloads via a satellite channel Protecting the TV from Hacking and malicious code System gt Smart Security QAND When the TV is connected to the Internet it is vulnerable to hacks and malicious code Smart Security protects the TV and storage media connected to the TV from such threats Navigate to System gt Smart Security and set Smart Security to On Checking the TV and Connected Storage Media System gt Smart Security gt Scan Navigate to System gt Smart Security and select Scan This scans the TV and connected media for the presence of malicious code If no malicious code is detected a notification window appears on the screen If malicious code is detected If malicious code was found the results of the scan will appear on the screen This result window displays all malicious code found and provides options to either quarantine the code or allow them to continue 1 Select all malicious code to q
184. tifications Select Notifications from the System menu to view the list of event messages generated by the TV Notifications appear on the screen when events such as an update release for an app or Samsung Account login logout occurs A Select Delete All to delete all notifications A Select Service Notice to check the SMART TV service notifications in a web browser Setting Up a Password System gt Change PIN Set a PIN Personal Identification Number to lock channels reset the TV and change the TV settings 1 Select System gt Change PIN The PIN input window appears 2 Enter a PIN The default PIN is 0000 For France Italy 1 1 1 1 3 Enter a new PIN and then enter it again to confirm it The PIN change is complete if you forget your PIN you can reset it using the Samsung Smart Control With the TV turned on press the following buttons on the remote to reset the PIN to 0000 RETURN RETURN gt RETURN is the Volume Up button is the Volume Down button The amp button is on the left side of the remote Programme Rating Lock Broadcasting gt Programme Rating Lock A Availability depends on the specific model and area The Programme Rating Lock blocks programmes with ratings higher than those desired This is useful for controlling what children watch on TV This will not function for programmes originating from external sources such as DVD players or USB files This PIN
185. tion can also be accessed using the El button A Available only while recording is in progress A Also possible to configure the TV to automatically save highlights without user intervention Select System gt Football Mode and then set Auto Highlights to On Stop Recording Go to Live TV Use this button while watching a live programme to stop recording it Use while watching a recorded programme to watch a live programme Available only when recording is in progress Record Start recording the sports event being watched Available only with the recording function supported Rewind Rewind the current video Select repeatedly to increase the rewind speed by up to max 5 steps A Available only when recording is in progress e Pause Play Pause resume video A Available only when recording is in progress e Fast Forward Fast forward the current video Select repeatedly to increase the fast forward speed by up to max 5 steps A Available only when recording is in progress e Highlights Player Use Highlights Player to view manually or automatically saved highlight segments of the recording However Highlights Player is not available with these TV operations e Recording two channels simultaneously e When Audio Description is set to On e Switching the input signal using the SOURCE button e When 3D mode is active A Available only when recording is in progress e Watch Live TV at the same time Select
186. to activate those options e Only a limited number of fonts are supported Certain symbols and characters may not be displayed properly e The response to remote commands and the resulting on screen display may be delayed while a webpage is loading e Loading a webpage may be delayed or suspended completely with certain operating systems e The copy and paste operations are not supported e When composing an email or a simple message certain functions such as the font size and colour selection may not be available e There is a limit to the number of bookmarks and the size of the log file that can be saved e The number of windows that can be opened concurrently varies depending on the search conditions and the TV model The web browsing speed will vary depending on the network environment Playing embedded video automatically disables PIP Video playback may not commence after PIP is disabled In this case you will have to reload the page The web browser supports mp3 audio files only The web browser supports a specific file format for importing and exporting bookmarks Compatible Format Netscape bookmark file 1 The folder tree information is not included when importing and exporting bookmarks Exporting bookmarks to a USB device connected to the TV saves the bookmarks under a folder named Samsung SmartTV Bookmark If the Clock System gt Time gt Clock has not been set the browsing history will not be saved T
187. to resolve the issue If your Samsung TV appears to turn off by itself try disabling some of the TV s energy efficiency features See if Sleep Timer System gt Time gt Sleep Timer has been enabled The Sleep Timer automatically turns the TV off after a specified period of time If the Sleep Timer has not been enabled see if No Signal Power Off System gt Eco Solution gt No Signal Power Off or Auto Power Off System gt Eco Solution gt Auto Power Off has been enabled and disable them When the TV is turned on the remote control receiver flashes 5 times before the screen turns on If you are having problems powering on your Samsung television there are a number of things to check before calling the service department Confirm that the TV s power cord is connected correctly at both ends and that the remote control is operating normally Make sure that the antenna cable or cable TV cable is firmly connected If you have a cable satellite box confirm that it is plugged in and turned on Launch Setup System gt Setup or Auto Tuning Broadcasting gt Auto Tuning If your TV is not connected to a cable box or satellite box run Setup System gt Setup or Auto Tuning Broadcasting gt Auto Tuning The Problem The TV image does not look as good as it did in the store The picture is distorted The colour is wrong or missing The colour is poor or the picture is not bright enough There is a dotted line on the ed
188. tput resolution accordingly You cannot select the Subtitle menu if you have selected a source connected to the TV via HDMI or Component connections To view subtitle turn on the external device s subtitle function This smell is normal and will dissipate over time Verify that the current channel is a digital channel The Signal Information is only available for digital channels Remove the base stand from the TV and reassemble it Broadcasting is only available when the Source is set to TV The Broadcasting menu cannot be accessed while watching TV using a cable box or satellite receiver Certain Broadcasting menus cannot be accessed while recording or while the TimeShift operation is in progress If the Use Mode is set to Store Demo the TV s audio and video settings are automatically reset every 5 minutes Change the Use Mode Support gt Use Mode to Home Use Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If you are mounting the TV to a wall we recommend using cables with 90 degree connectors This is part of the product s design and is not a defect PIP functionality is only available when you are using an HDMI or Component source The Problem A POP TV s internal banner ad appears on the screen The TV is making a popping noise The TV is making a humming noise T
189. trol The TV recognises predefined voice commands only and the voice commands may differ from the manual depending on the version Changing Voice Control Language System gt Voice Control gt Language Navigate to System gt Voice Control gt Language and select a preferred language from the list Now you can use Voice Control in the specified language Interactive Voice Control is not available in some languages If this is the case choose a different language Using the Voice Interaction function Interactively Availability depends on the specific model and area Voice Control allows you to set up Schedule Recording Schedule Viewing access VODs search and launch applications and execute various other commands using voice commands and without having to remember specific commands or keywords Saying Turn off the TV in 30 minutes for example instructs the TV to turn off after 30 minutes Sleep Timer If you use the Voice Control function interactively at least once the TV will change the on screen menu name from Voice Control to Voice Interaction Activate Voice Interaction and say a command See the examples below e When you don t know which channel a specific programme is on Watch Title Play Title Run Title e When you want to find a specific programme or content item xxx Title Find Title e When you want to reserve and record a programme Remind me t
190. trol Some of the functions on this TV can be controlled using hand or finger motions Activate Motion Control via System gt Motion Control Using Motion Control Raise a hand with the index finger pointing upwards until an arrow cursor appears on the screen Move the hand to control the pointer on the screen and perform a mouse click gesture to click a button A TV camera sold separately needs to be connected in order to use Motion Control For more information refer to TV Control using Motions s i pee gC ann i g s To u a o ua Si ain gm ean gt tee ina oe ra g nay a Se SLY Wo Cm af _ a a a rr yy 7 a i Fr Ei w a Sag A amp DR _ W y D e 4 J DE F a z6 B Sees y ia j A E Tr J A d N y g sso J es J E A uJ U4 i W h a i b W 7 Ea p i eee Cay Vad a Sa me 2 oa Sw ww k Availability depends on the specific model and area Samsung Smart Control Use the Samsung Smart Control to access various functions via the SEARCH KEYPAD SOURCE and VOICE buttons In addition you can move the pointer by pressing and holding the touchpad lightly 2 Setting the Samsung Smart Control Set up the Samsung Smart Control based on your preferences Setting include the touch sensitivity and onscreen remote size Set the Smart Control Settings via System gt Smart Control Settings Smart Control Setti
191. ttached to the remote control When you see this alarm icon on the screen Following alarm icon indicates Samsung Smart Control s batteries are low If the alarm icon pops up replace the batteries Samsung recommends using alkaline batteries for a longer operating life TTT TTT lt lt Low Battery Alarm Icon gt Pairing Samsung Smart Control Availability depends on the specific model and area To control the TV with Samsung Smart Control you need to pair Samsung Smart Control to the TV via Bluetooth Pair Samsung Smart Control to the TV Samsung Smart Control can only be paired to a single TV Point Samsung Smart Control at the remote control sensor of the TV and press the TV button to turn the TV on Remote control receiver s location may vary depending on the model Reconnecting Samsung Smart Control If the Samsung Smart Control stops operating or works abnormally replace the batteries as this may be due to insufficient battery power If the problem persists the Samsung Smart Control restore pairing with the TV 1 Press both the RETURN button and the Guide button simultaneously for more than 3 seconds A You must place the Samsung Smart Control approximately 30cm 40cm away from the TV and ensure it is pointing towards the remote control receiver 2 Connection image is appeared on the screen And then Samsung Smart Control is connecting to TV automatically Using Samsung Smart Control Availabi
192. ty depends on the specific model and area 1 Place the Bluetooth mouse in standby status A Refer to the mouse manual for information on putting the mouse in standby status 2 Select System gt Device Manager gt Mouse Settings gt Add Bluetooth Mouse The Add Bluetooth Mouse screen will appear and automatically scan for available mice 3 Select the Bluetooth mouse from the scanned list and then select Pair and connect This pairs the Bluetooth mouse with the TV Using the Mouse Once a USB or Bluetooth mouse is connected to the TV a pointer will appear on the TV s screen You can use this pointer to control the TV as you would a computer Selecting and Running an Item Left click on the mouse Displaying the Volume Mute and Channel Buttons Select the volume channel icon on the screen while watching TV Use the onscreen buttons to adjust the volume or switch the channel A Select the volume channel icon again to hide the buttons Showing Tools Buttons Right clicking shows the Tools buttons on the screen so that you can easily use the TV functions A The Tools buttons may vary depending on the function Displaying the Context sensitive Menu on Smart Hub On the Smart Hub screen navigate to an item and hold down the left mouse button for 1 second The Options menu available to the selected item appears The Options menu depends on the context Scrolling the TV Menu or Screen Move the mouse wheel up or down This scr
193. uarantine or allow 2 Select Block or Allow This moves the selected malicious code to the Isolated List or Allowed List A The Isolated List displays all blocked malicious code You can also relocate codes from this list to the Allowed List A The Allowed List displays all allowed malicious code You can also relocate codes from this list to the Isolated List Automatically Scanning when the TV is Powered On System gt Smart Security gt Settings gt Auto Scan Navigate to System gt Smart Security gt Settings and then set Auto Scan to On This automatically scans the TV and connected storage media when the TV is powered on Automatically Adding malicious code to the Blocked List System gt Smart Security gt Settings gt Move to Isolated List automatically Navigate to System gt Smart Security gt Settings and set Move to Isolated List automatically to On Malicious code found during the scanning process is automatically added to the Blocked List Using Other Functions Enabling Voice Guide for the Visually Impaired A Availability depends on the specific model area and language System gt Accessibility gt Voice Guide Voice Guide provides guiding information in voice to aid the visually impaired to use the TV more conveniently Enabling this option provides voice guide regarding focus change channel change volume change and various other TV statues Navigate to System gt Accessibility gt Voice Guide a
194. ub gt Samsung Account and select Log In 2 Choose your Samsung Account and select Sign In 3 Using the login method configured for the selected Samsung Account log into your Samsung Account Linking My Samsung and App Accounts Smart Hub gt Samsung Account gt Link Service Accounts Linking your Samsung Account to accounts of apps installed on the TV lets you automatically log into your linked app accounts when you log into your Samsung Account For example you can download the Facebook app and link your Facebook account to your Samsung Account In this case logging into your Samsung Account then automatically logs you into your Facebook account as well A To use Link Service Accounts you must first log into your Samsung Account Linking an App Account 1 Navigate to Smart Hub gt Samsung Account and select Link Service Accounts A list of apps that can be linked to your Samsung Account is shown 2 Select an app from the list The Link to other accounts window appears on the screen Enter the current ID and password of the app to log in When the login is complete the app account is linked to the Samsung Account Disconnecting a Linked Account 1 Navigate to Smart Hub gt Samsung Account select Link Service Accounts Select an app to unlink 2 A confirmation dialog box appears Select Yes to unlink the app Changing and Adding Information to Samsung Account Smart Hub gt Samsung Account Using the Samsung Accou
195. umber Use this to change channel number When channel number is changed channel information is not updated automatically Creating a Personal Favourites List Broadcasting gt Edit Favourites You can designate frequently watched channels as favourites Favourites channels are highlighted in the Edit Channel and Channel List screens with the symbol You can create up to 5 favourites channel lists Registering a Channel as Favourites Broadcasting gt Edit Favourites Registering the Current Channel as a Favourites Add the current channel to a Favourites list 1 Select TOOLS while watching TV to display a list of options Select Edit Favourites from the list 2 From the pop up window select all the Favourites lists you want to add the current channel to and then select OK 3 This adds the current channel to the selected Favourites list s Select OK Registering Multiple Channels as Favourites It s possible to register multiple channels as favourites at the same time 1 Select Broadcasting gt Edit Favourites 2 Select Category from the bottom of the screen to change the channel list to the one containing that channels you want to register Select the channels from the list in the middle of the screen Select Change Fav and then change the Favourites 1 to the Favourites 5 you want to use 5 Select Add Viewing Favourites List Channels Only It s possible to flip through Favourites list channels using only t
196. un data service Auto Run Data Service automatically runs data service without user intervention A If any other secondary function is under way Auto Run Data Service may not work Using Data Service If the channel you are currently watching provides data service you can enjoy a variety of data services by selecting EN A Provided Data Service information may vary depending on broadcast While using data services changing the channel using numeric keys may not be possible depending on the service 1 Select EY and then select a desired service A If Auto Run Data Service is On the data service will automatically run with loading banner In this case the EN function does not work Select EY to display the data service screen 3 Move to a desired option on the data service screen and then select OK The selected service starts 4 If you select EXIT data service closes HbbTV This function may not be available depending on the country Access services from entertainment providers online providers and CE manufactures through HbbTV In some countries HbbTV is a data service This service may be supported in other countries Some broadcasting may not support the HbbTV HbbTV is turned off by default To use HbbTV go to System gt Data Service and set it Enable Depending on the country e HbbTV is not available when Timeshift is running or when a recorded video is being played back e An application on Hbb
197. und Support Functions 160 Selecting Speakers 160 Designating the TV s Installation Type 160 Listening to TV Sound through Samsung Bluetooth or Wi Fi Audio 161 Listening to TV Sound through Samsung Multiroom Link compatible Speakers 162 Enabling the Sound Additional Settings 163 Listening to 3D Audio in 3D Mode 163 Resetting All Sound Settings General Setting the Time and Using the Timer 164 Setting the Current Time 165 Using the Timers Using the Screen Burn Protection and Energy Saving Features 167 Preventing Screen Burn 167 Using Energy Saving Features Using Anynet HDMI CEC 168 Setting Up Anynet HDMI CEC 169 Using Anynet HDMI CEC Using the e Manual 170 Launching the e Manual 170 Additional e Manual Features 171 Updating the e Manual to the Latest Version Updating the Software 172 Updating Software over the Internet 172 Updating Software using a USB connection 173 Enabling Automatic Software Updates 173 Software update via satellite channel Protecting the TV from Hacking and malicious code 174 Checking the TV and Connected Storage Media 174 Automatically Scanning when the TV is Powered On 174 Automatically Adding malicious code to the Blocked List Using Other Functions 175 Enabling Voice Guide for the Visually Impaired 176 Enabling the High Contrast 176 Adjusting the Menu Transparency 177 Expanding the Smart Hub s Focus Area 177 Changing the Menu Language 177 Checking Notifications
198. volume 2 Use the channel buttons to change the channel or the volume buttons to adjust the volume This changes the selected screen s channel volume Smart Hub Smart Hub gt Open Smart Hub With Smart Hub you can surf the web download apps and stay in touch with family and friends through social networking services In addition you can use photo video and music files stored on external storage devices v B i 2 Y Some Smart Hub services are paid services To purchase such a service the service provider account or Samsung Apps TV account Samsung account is required A Make sure the TV is connected to the Internet The TV must be connected to the Internet in order to use Smart Hub A Some features of Smart Hub require an Internet connection and may not be available depending on the service provider language or region A To use Smart Hub you must agree to the end user agreement and privacy policy Otherwise you will not be able to access the features and services related to them You can view the entire content of the Terms amp Policy by navigating to Smart Hub gt Terms amp Policy If you don t wish to use Smart Hub anymore you can withdraw the agreement A Smart Hub service outages can be caused by disruptions in your Internet service Testing Smart Hub connections Support gt Self Diagnosis gt Smart Hub Connection Test A Availability depends on the specific model and area If Smart Hub is not functioni
199. while viewing a recorded programme to watch live TV on a PIP window Press once more to exit PIP mode However Watch Live TV at the same time is not available with these TV operations e Recording two channels simultaneously e When Audio Description is set to On e Switching the input signal using the SOURCE button e When 3D mode is active Available only when recording is in progress A Available only while watching a recorded programme e Information Displays detailed information about the current programme A Available only when recording is in progress e Go to Social TV SOCIAL TV Used to launch an SNS app Viewing a Sports Event Recorded in Football Mode View recorded sports events using the Recorded TV option in the On TV screen or the USB Drive option in the MULTIMEDIA screen TV Viewing Support Features Showing Subtitles System gt Accessibility gt Subtitle Show subtitles Subtitles will be displayed when watching a broadcast that supports subtitles Switches subtitles On or Off Press and hold the button on the Samsung Smart Control to turn on or off Subtitle DVD subtitles are only available if the DVD player is connected to an external input connector e Subtitle Mode Set the subtitle mode e Subtitle Language Set the subtitle language A The TV cannot control or modify DVD or Blu ray subtitles To control DVD or Blu ray subtitles use the subtitle feature of the DVD or Blu ray player and the
200. work properly if there is another 3D product or an electronic device running nearby If there is a problem keep other electronic devices as far away as possible from the 3D Active Glasses The left and right 3D images may initially overlap when the TV is turned on It takes a moment for the display to optimise for the overlapping to go away There are several restrictions when using 3D TV e Launching Smart Hub automatically disables 3D mode e PIP cannot be used e Certain Picture options are disabled Changing the 3D Mode Picture gt 3D gt 3D Mode 1 2 Launch 3D and then select 3D Mode under Picture gt 3D Choose from the 3D modes that appear on the screen Supported 3D Mode may vary depending on the 3D content A 3D Mode is automatically configured for most 3D content The following 3D Mode is available However mode availability may vary depending on the 3D content s format The supported resolutions vary for each mode Refer to the Supported Resolutions for each 3D Mode section for more information Off Deactivates 3D viewing LE Normal Converts normal images to 3D images A Some formats do not support this mode BE L R Splits a single image into left and right overlapping images to create the 3D effect H T B Splits a single image into top and bottom overlapping images to create the 3D effect Adjusting the 3D Effect Picture gt 3D Configure the viewpoint depth an
201. y as possible from the 3D Active Glasses The ideal viewing distance is three times or more the height of the screen We also recommend watching 3D content with your eyes level with the screen Turn off the 3D glasses when they are not in use If you leave the 3D glasses on the battery lifespan is shortened There is a problem with the broadcast The Problem The TV is not receiving all channels There are no captions with digital channels The picture is distorted Try this If your TV is not connected to a cable box or satellite box e Confirm that the coaxial cable is securely connected to the TV e f you are using an antenna verify it is positioned correctly and the all the connections are secure e Run Setup System gt Setup or Auto Tuning Broadcasting gt Auto Tuning Go to Subtitle System gt Accessibility gt Subtitle and change the Subtitle Mode Some channels may not have caption data The compression of the video content may cause picture distortions This is especially true with fast moving pictures from sports programmes and action movies A weak signal can cause picture distortions This is not a problem with the TV The computer won t connect The Problem The Mode Not Supported message appears The video is OK but there is no audio Try this Set your PC s output resolution so it matches a resolution supported by the TV If you are using an HDMI connection check the audio
202. y up to max 5 steps To restore normal playback speed press the gt button Previous Next To play the previous file recorded programme press lt lt twice Selecting 44 once reloads the current video from the beginning To play the next file recorded programme press gt i A This function is not available when the Programme is recorded in Football Mode Highlights Player Select Highlights Player to view highlights from the current recording This feature is only available for programmes that were recorded in Football Mode and along with highlight data have been saved Live TV This function enables the PIP feature so that you can watch a live programme through PIP A Channels cannot be changed A You can only use this function for programmes recorded in Football Mode e fools Function Search Subtitle Settings Repeat Mode Picture Size Picture Mode Sound Mode Select Speakers Audio Language Information Description Search Scene This will take you to a scene in the video Search Scene cannot be used if 1 the extraction of the thumbnails from the file Recorded broadcast being played back is not finished 2 playing back a file with audio only recorded broadcast or 3 the duration of the recorded file recorded broadcast is less than 60 seconds Search Titles Select and play a different file located in the same folder Search Time Bar Press lt gt button to scan through the file in

Samsung UE55H6400AW 55" Full HD 3D compatibility Smart TV Wi-Fi Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung UE55H6400AW 55&quot; Full HD 3D compatibility Smart TV Wi-Fi Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung UE55H6400AW 55" Full HD 3D compatibility Smart TV Wi-Fi Black