Philips CSS7235Y
Contents
1. Pair up with the speakers 1 Turn on the main unit and the surround wireless speakers L gt If the connection to the main unit is lost the red and orange LEDs on the wireless speaker blink alternatively Dock the left and right wireless speakers onto the main unit left and right base speakers L gt Ifthe pairing is successful the orange LED on the wireless speaker lights up for five seconds L gt If the pairing fails the red and orange LEDs on the wireless speaker blink alternatively If the paring fails re dock the wireless speakers onto the main unit Pair up with the subwoofer 1 Turn on the main unit and the subwoofer L Ifthe connection to the main unit is ost the white LED on the subwoofer blinks slowly Press the CONNECT connect button on the subwoofer to enter the pairing mode L gt The white LED on the subwoofer blinks quickly On the remote control press OPTICAL then press and hold AUDIO SYNC for five seconds L gt If the pairing succeeds the white LED on the subwoofer lights up L gt Ifthe pairing fails the white LED on he subwoofer blinks slowly If the pairing fails repeat the steps above Note e After the subwoofer is manually connected to the main unit pair the surround speakers with the main unit again for re connection Place speakers For best sound effect position all the speakers towards the seating position and place2. NFC A device cannot connect with this product via NFC e Make sure that the device is supported by NFC e Make sure that NFC is enabled on the device see the device s user manual for details e For pairing tap the NFC device on the NFC tag of this product EN 17 English ABASMRALA Hazardous Toxic Substance BBE AER E K He fm Cd TONE SRA Si ROAR Name of the Parts Pb Lead Mercury Cadmium Chromium 6 PBB PBDE Housing O O O oO O O Share Subwoofer o o o o o o a4 RAHA E Loudspeakers o O O O O 0 g UES PWBs X O oO O O O HE BRR ZH Accessories x o O o o o Remote control amp cables MHE GEPAS UR ERR Batteries in X O O O O O Remote Contro ZnC Rees O RANA EWE AMET A BAL Pe CES J T11363 2006 PRERE RERA F o O Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ T11363 2006 X RARE EEA LEA I BOL Pe RTS J T11363 2006 PRERE Ay BRE BER X Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ T11363 2006 VD K Environmental Protection Use Period ERWIK TE RE m PEA A SA RARE EKE AE BAN EINER RR HAEA ETAR Ph NS EA E OTE A Pa E AIIM This logo refe
3. turn on HDMI CEC operations For details see the user manual of the device DIGITAL IN COAXIAL IN Connect audio from TV and other devices English Play audio from TV or other devices through he speakers of this product Use the best quality connection available on this product TV and other devices 1 Using a coaxial cable connect the Note COAXIAL connector on the left base e When this product and TV are connected through speaker of this product to the COAXIAL HDMI ARC an audio connection is not required DIGITAL OUT connector on the TV or other device e The digital coaxial connector might be labeled DIGITAL AUDIO OUT Option 1 Connect audio through a digital optical cable Best quality audio DIGITAL IN OPTICAL 1 Using an optical cable connect the OPTICAL connector on the left base speaker of this product to the OPTICAL OUT connector on the TV or other device e The digital optical connector might be labeled SPDIF or SPDIF OUT Option 2 Connect audio through a digital coaxial cable Good quality audio EN 11 4 Use your product This section helps you use this product to play audio from connected devices Before you start e Make the necessary connections described in the quick start guide and the user manual e Switch this product to the correct source for other devices Adjust the volume 1 Press Volume to incr
4. country Before you contact note down the model number and serial number of your product You can find this information on the back or bottom of your product EN 3 2 Your product Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Main unit The main unit of this product is comprised of eft and right base speakers GOOOHO SY A 1 Red white blue LEDs Red LED e Lights up when the main unit is switched to standby ite LED ights up when the main unit is ched on nks once each time you press a ttton on the remote control nks twice when Dolby Digital audio input nks three times when DTS audio is put nks continuously when no audio om the selected HDMI ARC source detected or when an unsupported audio format is detected Blue LED 1s mn o TEETE w5 Da wW x 4 EN e Lights up when you switch to Bluetooth mode and Bluetooth devices are paired e Blinks when you switch to Bluetooth mode and Bluetooth devices are not paired 2 NFC tag Tap the NFC enabled device on the tag for Bluetooth connection 3 Standby On Switch the main unit on or to standby 8 Switch to Bluetooth mode a Toggle through all sources Volume Increase or decrease volume Remote control This section in
5. same or equivalent type Remove batteries if they are exhausted or if the remote control is not to be used for a long time Batteries contain chemical substances they should be disposed of properly of swallowing batteries The product remote contro may contain a coin button type battery which can be swallowed Keep the battery out of reach of children at all times If swallowed the battery can cause serious injury or death Severe internal burns can occur within two hours of ingestion f you suspect that a battery has been swallowed or placed inside any part of the body seek immediate medical attention When you change the batteries always keep all new and used batteries out of reach of children Ensure that the battery compartment is completely secure after you replace the battery If the battery compartment cannot be completely secured discontinue use of the product Keep out of reach of children and contact the manufacturer This is CLASS I apparatus with double insulation and no protective earth provided Care for your product Use only microfiber cloth to clean the product such as removing dust and shedding accumulated on the speaker cloth Do not use any cleaning solvent to clean the wooden panels and speaker cloth e Clean the leather handles with a slightly damp soft cloth which is dipped in a leather cleaning solution then buff the leather with a dry soft cloth e The wooden panel
6. them close to your ear level seated e Surround sound depends on factors such as room shape and size type of wall and ceiling windows and reflective surfaces and speaker acoustics Experiment with the speaker positions to find the optimum setting for you 1 2 3 4 Follow these general guidelines for speakers placement Seating position This is the center of your listening area Place the main unit left and right base speakers in front of the seating position L R surround speakers left right Place the rear surround speakers to the left and right side of your seating position either in line with it or slightly behind it SUBWOOEFER subwoofer EN English Place the subwoofer at least one meter to the left or right of the TV Leave about 10 centimeter clearance from the wall Dock the surround speakers You can also dock your surround speakers onto the main unit to listen to audio for example watching TV shows and news Connect to TV Connect this product to a TV You can listen to audio from TV programs through the speakers of this product Use the best quality connection available on this product and TV Connect to TV through HDMI ARC Best quality audio This product supports HDMI with Audio Return Channel ARC If your TV is HDMI ARC compliant you can hear the TV audio thr
7. Always there to help you Register your product and get support at www philips com welcome ON Question Contact Philips CSS7235Y User manual AP FH PHILIPS Contents 1 Important Safety Care for your product Care of the environment Help and support WWWN N Your product Main unit Remote control Wireless speakers Wireless subwoofer Connectors Non 4s Connect and set up Connect the main unit Charge speakers Pair up with speakers subwoofer Place speakers Connect to TV Connect digital devices through HDMI Connect audio from TV and other devices OOo CO CO CO CO Use your product Adjust the volume Choose your sound MP3 player Play music via Bluetooth Play music via NFC Auto standby Apply factory settings Product specifications Troubleshooting 16 EN English 1 Important Read and understand all instructions before you use your product If damage is caused by failure to follow instructions the warranty does not apply Safety Risk Risk Risk of electric shock or fire ever expose the product and accessories o rain or water Never place liquid containers such as vases near the product f liquids are spilt on or into the product disconnect it from the power outlet immediately Contact Consumer Care to have the product checked before use ever place the product and accessories near naked flames or other heat sources incl
8. all metallic casing that covers the device or other devices nearby that operate in the same frequency e Ifyou want to connect this product with another Bluetooth device press and hold Bluetooth on the remote control to break the current Bluetooth connection Play music via NFC NFC Near Field Communication is a technology that enables short range wireless communication between NFC enabled devices such as mobile phones What you need e A Bluetooth device with NFC function e For pairing tap the NFC device on the NFC tag of this product e The operational range between the main unit left and right speakers and a NFC device is approximately 10 meters 30 feet Enable NFC on the Bluetooth device see the device s user manual for details 2 Tap the NFC device on the NFC tag of this product until you hear a beep sound from this product L gt The blue LED on the left base speaker lights up and the NFC device is connected to this product via Bluetooth Ly If the connection fails the blue LED on the left base speaker blinks continually 3 Select and play audio files or music on your NFC device e To break the connection tap again the NFC device with the NFC tag on this product 14 EN Auto standby If no audio video playback is detected from a connected device for 30 minutes this product automatically switches to standby Apply factory settings You can reset this
9. and then you can listen to the audio files stored on the device through the speakers of this product What you need e A Bluetooth device which supports Bluetooth profile A2DP and with Bluetooth version as 2 1 EDR e The operational range between the main unit left and right speakers and a Bluetooth device is approximately 10 meters 30 feet 1 Press Bluetooth on the remote control to switch this product to Bluetooth mode L gt The blue LED on the left base speaker blinks 2 On the Bluetooth device switch on Bluetooth search for and select Philips CSS7235Y to start connection see the user manual of the Bluetooth device on how to enable Bluetooth L gt During connection the blue LED on he left base speaker blinks 3 Wait until you hear a beep sound from this product L gt The blue LED on the left base speaker ights up Ly If the connection fails the blue LED on he left base speaker blinks continually 4 Select and play audio files or music on your Bluetooth device During play if a call is coming music play is paused Play resumes when the call ends e If music streaming is interrupted place he Bluetooth device closer to this product 5 To exit Bluetooth select other source e When your switch back to Bluetooth mode Bluetooth connection remains active EN 13 English e The music streaming may be interrupted by obstacles between the device and this product such as w
10. cludes an overview of the remote control SURR SOUND I IAUDIO SYNC P ON PHILIPS Fidelio 4 Standby On e Switch the main unit on or to standby e When EasyLink is enabled press and hold for at least three seconds to switch all connected HDMI CEC compliant devices to standby HDMI selection HDMI ARC Switch your source to HDMI ARC connection HDMI 1 Switch your source to the HDMI IN 1 connection HDMI 2 Switch your source to the HDMI IN 2 connection Source buttons 0 Bluetooth Switch to Bluetooth mode Press and hold three seconds to break the current Bluetooth connection OPTICAL Switch your audio source to the optical connection COAX Switch your audio source to the coaxial connection AUDIO IN Switch your audio source to the AUDIO IN connection 3 5mm jack SURR SOUND ON OFF e Turn surround sound on or off when the wireless surround speakers are docked onto the main unit e Ia HDMI IN mode connected via HDMI IN 1 or HDMI IN 2 press and hold SURR SOUND ON to switch audio output between this product s speakers and TV speakers English Volume control Increase or decrease volume amp Mute or restore volume RESET J e Set the bass and treble to the default settings BASS Increase or decrease bass TREBLE Increase or decrease treble AUDIO SYNC Increase or decrea
11. d delay the audio to match the video 1 Press AUDIO SYNC to synchronize the audio with the video e AUDIO SYNC increases the sound delay and AUDIO SYNC decreases the sound delay L gt If the value of sound delay is set to the maximum or minimum the white LED on the main unit lights up for two seconds Night mode For quiet listening decrease the volume of loud sounds when audio is played Night mode is only available for Dolby Digital soundtracks 1 In AUDIO IN mode press and hold AUTO VOL ON for five seconds to turn night mode on or off Ly If night mode is turned on the white LED and the standby LED blink twice Ly If night mode is turned off the white LED and the standby LED blink three imes Note e If auto volume is set to turned on you cannot enable the night mode MP3 player Connect your MP3 player to play your audio files or music What you need e An MP3 player e A 3 5mm stereo audio cable 1 Using the 3 5mm stereo audio cable connect the MP3 player to the AUDIO IN connector on the left base speaker Press AUDIO IN Press the buttons on the MP3 player to select and play audio files or music e Onthe MP3 player it is recommended to set the volume in the range of 80 maximum volume wN Play music via Bluetooth Through Bluetooth connect your product with a Bluetooth device such as an iPad iPhone iPod touch Android phone or laptop
12. ease or decrease a volume level e To mute sound press amp Mute e To restore the sound press amp Mute again or press Volume Choose your sound This section helps you choose the ideal sound for your video or music Surround sound mode Experience an immersive audio experience with surround sound modes 1 Dock the surround speakers onto the main unit 2 Press SURR SOUND ON OFF to turn surround mode on or off On Create a surround listening experience Four channel audio sound Ideal for party music e Off Two channel stereo sound Ideal for listening to music 12 EN Note e Ifthe surround speakers are undocked from the main unit it is fixed to surround mode only Equalizer Change the high frequency treble and low frequency bass settings of this product d Press TREBLE or BASS to change the frequency L gt If the treble or bass is set to the maximum or minimum the white LED on the main unit lights up for two seconds 2 To reset the bass and treble to the default setting press RESET J Auto volume Turn the auto volume on to keep the volume constant when you switch to a different source It also compresses the sound dynamics increasing the volume for quiet scenes and decreasing the volume for loud scenes 1 Press AUTO VOL ON OFF to turn auto volume on or off Synchronize picture and sound If the audio and video are not synchronize
13. fer is switched on e The white LED lights up when the subwoofer is wirelessly connected to the main unit e The white LED blinks if the subwoofer is not wirelessly connected to the main unit e The white LED turns off four minutes after the main unit is switched to standby Connectors This section includes an overview of the connectors available on this product On the left base speaker ai ADMIN e HOMIIN2y HOMI bai SS eae eo 2 e 000 O HDMI IN 1 HDMI IN 2 Connect to the HDMI output on a digital device TO TV HDMI OUT ARC Connect to the HDMI ARC input on the TV AUDIO IN Audio input from for example an MP3 player 3 5mm jack OPTICAL Connect to an optical audio output on the TV or a digital device COAXIAL Connect to a coaxial audio output on the TV or a digital device TO R SPEAKER Connect to the right base speaker eo On the right base speaker AC MAINS e TO L SPEAKER 4 TO L SPEAKER Connect to the left base speaker AC MAINS Connect to the power supply EN English 3 Connect and set up This section helps you connect this product to a TV and other devices and then set it up For information about the basic connections of this product and accessories see the quick start guide N
14. nnect the subwoofer to the main unit see Pair up with the subwoofer on page 9 Distorted sound or echo e If you play audio from the TV through this product make sure that the TV is muted Audio and video are not synchronized e Press AUDIO SYNC to synchronize the audio with the video Bluetooth A device cannot connect with this product e The device does not support the compatible profiles required for this product e You have not enabled the Bluetooth function of the device See the user manual of the device on how to enable the function e The device is not correctly connected Connect the device correctly see Play music via Bluetooth on page 13 e This product is already connected with another Bluetooth device Disconnect the connected device then try again Quality of audio play from a connected Bluetooth device is poor e The Bluetooth reception is poor Move the device closer to this product or remove any obstacle between the device and this product The connected Bluetooth device connects and disconnects constantly e The Bluetooth reception is poor Move the device closer to this product or remove any obstacle between the device and this product e Turn off Wi Fi function on the Bluetooth device to avoid interference e For some Bluetooth the Bluetooth connection can be deactivated automatically to save power This does not indicate any malfunction of this product
15. ote e For identification and supply ratings see the type plate at the back or bottom of the product e Before you make or change any connections make sure that all devices are disconnected from the power outlet Connect the main unit With the supplied DIN cable connect the left base speaker to the right base speaker as main unit See the quick start guide for details Charge speakers If the wireless surround speaker is undocked from the main unit its battery level is indicated by the indicators on the wireless speaker e White LED full battery or more than 30 capacity remaining Red LED low battery level less than 30 remaining e Blinking red LED near empty less than 10 remaining 1 Dock the left and right wireless speakers onto the main unit left and right base speakers to charge the speakers 2 Tum on the main unit L gt During charging the orange LED on the wireless speaker lights up L gt When fully charged the orange LED on the wireless speaker turns off Note e lt may take around 3 hours to fully charge the speakers Pair up with speakers subwoofer The wireless speakers and subwoofer automatically pair up with the main unit left and right base speakers for wireless connection when you turn on the main unit the speakers and the subwoofer If no audio from the wireless speakers and subwoofer can be heard do the following for pairing
16. ough the speakers of this product by using a single HDMI cable HDMI OUT ARC 1 Using a High Speed HDMI cable connect the HDMI OUT ARC connector on 10 EN the left base speaker to the HDMI ARC connector on the TV e The HDMI ARC connector on the TV might be labeled differently For details see the TV user manual 2 On your TV turn on HDMI CEC operations For details see the TV user manual Note e If yourTV is not HDMI ARC compliant connect an audio cable to hear the TV audio through the speakers of this product see Connect audio from TV and other devices on page 11 e If your TV has a DVI connector you can use an HDMI DVI adapter to connect to TV However some of the features may not be available rt Connect digital devices through HDMI Connect a digital device such as a set top box DVD Blu ray player or games console to your product through a single HDMI connection When you connect the devices in this way and play a file or game the e video is automatically displayed on your TV and e audio is automatically played on this product 1 Using a High Speed HDMI cable connect the HDMI OUT connector on your digital device to the HDMI IN 1 2 on the left base speaker of this product 2 Connect this product to TV through HDMI OUT ARC Ifthe TV is not HDMI CEC compliant select the correct video input on your TV 3 On the connected device
17. product to the default settings programmed at the factory 1 In OPTICAL mode press and hold RESET 2 for five seconds L gt When the factory settings restore is complete the product automatically switches off and restarts 5 Product specifications Note e Specifications and design are subject to change without notice Amplifier e Total output power 210W RMS 0 5 dB 30 THD 168W RMS 0 5 dB 10 THD e Frequency response 20 Hz 20 kHz 3 dB Signal to noise ratio gt 65 dB CCIR A weighted e Input sensitivity e AUDIO IN 500 mV Dimensions WxHxD 160 x 300 x 160 mm e Weight 3 8 kg English Surround speakers e Speaker impedance 8 ohm e Speaker drivers 2 x 63 5 mm 2 5 full range e Dimensions WxHxD 160 x 110 x 160 mm e Weight 1 0 kg each Subwoofer e Power supply 110 240 V 50 60 Hz Power consumption 30 WV Standby power consumption lt 0 5 W e Impedance 4 ohm e Speaker drivers 1 x 165 mm 6 5 woofer Dimensions WxHxD 220 x 440 x 220 mm Weight 5 4 kg Audio e S PDIF Digital audio input Coaxial IEC 60958 3 Optical TOSLINK Bluetooth e Bluetooth profiles A2DP e Bluetooth version 2 1 EDR Main unit left and right base speakers e Power supply 110 240 V 50 60 Hz Power consumption 50 WV Standby power consumption lt 0 5 W e Speaker impedance Woofer 8 ohm e t
18. rs to the period 10 years during which the toxic or hazardous substances or elements contained in electronic information products will not leak or mutate so that the use of these substances or elements will not result in any severe environmental pollution any bodily injury or damage to any assets EARR Battery labeling logo Seb CE BEREA ASA KART REE FS EE BEB AS ZS CE ES BR FP Hay th AS oF N Bg Be OMT TEA Vd EA HS PZN H Environmental Protection Use Period This logo refers to the period 5 years during which the toxic or hazardous substances or elements contained in the battery will not leak or mutate so that the use of these substances or elements will not result in any severe environmental pollution any bodily injury or damage to any assets ZH CN 15 PHILIPS Specifications are subject to change without notice 2013 WOOX Innovations Limited All rights reserved Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N V and are used by WOOX Innovations Limited under license from Koninklijke Philips N V ae CSS7235Y_93_UM_V1 0
19. s and leather handles may vary on color and grain pattern due to the use of natural materials Care of the environment Be Your product is designed and manufactured with high quality materials and components which can be recycled and reused ever dispose of your product with other household waste Please inform yourself about he local rules on the separate collection of electrical and electronic products and batteries The correct disposal of these products helps prevent potentially negative consequences on he environment and human health Your product contains batteries which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health Please visit www recycle philips com for additional information on a recycling center in your area Help and support For extensive online support visit English www philips com support to download the user manual and the quick start guide watch video tutorials available only for selected models find answers to frequently answered questions FAQs email us a question chat with our support representative Follow the instructions on the website to select your language and then enter your product model number Alternatively you can contact Consumer Care in your
20. se audio delay AUTO VOL ON OFF Turn auto volume on or off Q Wireless speakers This product comes with a pair of wireless surround speakers EN 5 The illu surround stration above is for either of wireless speakers O Red white orange LEDs Red Wh Orange LED Q o LED Lights up when the battery capacity is less than 30 remaining undocked from the main unit Blinks when the battery capacity is less han 10 remaining undocked from he main unit f the speaker is not wirelessly connected to the main unit the red and orange LEDs on the wireless speaker blink alternatively ite LED Lights up when the battery capacity is full or more than 30 remaining undocked from the main unit Lights up when the speaker is wirelessly connected to the main unit undocked from the main unit Lights up when the surround speaker is being charged f the speaker is not wirelessly connected to the main unit the red and orange LEDs on the wireless speaker blink alternatively Switch the surround speaker on Wireless subwoofer This product comes with a wireless subwoofer Q AC MAINS Connect to the power supply 2 CONNECT connect Press to enter the pairing mode for manual connection with the main unit GB Subwoofer indicator e The white LED lights up when the subwoo
21. uding direct sunlight ever insert objects into the ventilation slots or other openings on the product Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable Disconnect the product from the power outlet before lightning storms When you disconnect the power cord always pull the plug never the cable of short circuit or fire Before you connect the product to the power outlet ensure that the power voltage matches the value printed on the back or bottom of the product Never connect the product to the power outlet if he voltage is different of injury or damage to this product ever place the product or any objects on power cords or on other electrical equipment f the product is transported in emperatures below 5 C unpack the product and wait until its temperature EN Risk Risk Risk matches room temperature before connecting it to the power outlet Parts of this product can be made of glass Handle with care to avoid injury and damage of overheating ever install this product in a confined space Always leave a space of at least four inches around the product for ventilation Ensure curtains or other objects never cover the ventilation slots on the product of contamination Do not mix batteries old and new or carbon and alkaine etc Danger of explosion if batteries are incorrectly replaced Replace only with the
22. weeter 8 ohm e Speaker drivers 2 x 63 5 mm 2 5 woofer 2 x 25 4 mm 1 tweeter Remote control batteries e 2x AAA RO3 1 5 V EN 15 6 Troubleshooting Warning e Risk of electric shock Never remove the casing of the product To keep the warranty valid never try to repair the product yourself If you have problems using this product check the following points before you request service If you still have a problem get support at www philips com support Main unit The buttons on this product do not work Disconnect this product from the power supply for a few minutes then reconnect Sound No sound from the speakers of this product Connect the audio cable from this product to your TV or other devices However you do not need a separate audio connection when e this product and TV are connected through HDMI ARC connection or e a device is connected to the HDMI IN connector on this product e Reset this product to its factory settings see Apply factory settings on page 14 e On the remote control select the correct audio input e Make sure that this product is not muted No sound from the wireless surround speakers e Wirelessly connect the speakers to the main unit see Pair up with the speakers on page 8 Dock the wireless surround speakers into the main unit to charge the battery No sound from the wireless subwoofer 16 EN e Wirelessly co
Download Pdf Manuals
Related Search