Home

Philips DVP3355V

1. e C 2 CAES KCA nii 6 ba L AUDIO 7 Inserta recordable Press INPUT until L1 or L2 is SSeS A SENT ae ia da O O cassette tape displayed on the TV screen Select L1 Ee 3 to activate rear input jacks Select L2 to activate front input jacks INPUT See note on the right POWER ON e SPEED Le move SET y Tape speed To stop recording temporarily pause mode Tin TIS Press H PAUSE z 2Tshours iced cod ln oer Ppa s PAS NEUE uring the recor Ing In pause mode marks appear on tne TV screen Each mark represents 1 minute e Press it again to resume recording e Pause mode will be automatically cancelled after 5 minutes to C 7 OTR 0 30 gt OTR 1 00 prevent damage to the cassette tape and the video heads normal recording Note s e Do not change the External Tuner s Cable Satellite or Converter Set top Box channel while you are recording You CANNOT watch one channel while recording another channel at the same time e Connect your External Tuner Cable Satellite or Converter Set top Box to the L1 rear panel jacks on this Unit Connect camcorders and other such devices to the L2 front panel jacks Refer to page 11 13 4 Press REC until desired recording time is selected OTR 8 00 OTR 7 30 5 Pres
2. The DVD SOURCE light will illuminate Front amp Rear Terminals OPEN CLOSE weut zoom marken 4 anete staren repeat ea VCR button DVD button DVD SOURCE light VCR SOURCE light rear panel 1 DVD AUDIO OUT analog jacks Connect audio cables from here to the audio input jack of your television or audio device 2 DVD VCR AUDIO OUT jacks Connect audio cables from here to the audio input jack of your television or audio device Standard connection for DVD VCR use 3 VCR AUDIO IN jacks Connect a stereo audio cable from the audio output jacks of your camcorder VCR etc to here After making the connection press INPUT on the Remote Control Select L1 to activate the rear AUDIO IN jacks or L2 to activate the front jacks 4 VCR VIDEO IN jack Connect a video cable from the video output jack of your camcorder VCR etc to this Unit After making the connection press INPUT on the Remote Control Select L1 to activate the rear VIDEO IN jack or L2 to activate the front jack 5 DVD VCR VIDEO OUT jack Connect a video cable from here to the VIDEO input jack of your televi sion or audio device Standard connection for DVD VCR use 6 COMPONENT VIDEO OUT jacks Connect a component video cable from here to the component video input jack on your
3. e da title 1 title 2 digital video lt dl chapter 1 chapter 2 chapter 3 chapter 4 chapter 1 chapter 2 DVD RW es 3 inches lt gt rl an gt DVD R 8 cm el 3 4 5 6 7 8 9 10 audio CD COMPACT 3 5 9 DIGITAL AUDIO 5 inches COMPACT diet 1 2 cm DIGITAL AUDIO digital audio or CD RW ReWritable ReWritable 3 inches CD R 8 cm 3 4 5 8 9 COMPACT det DIGITAL AUDIO Recordable Recordable DVD is a trademark of DVD Format Logo Licensing Corporation If you cannot play back a disc which bears one of the marks above check the following 4 This Unit conforms to the NTSC color system Discs recorded in other color systems such as PAL cannot be played back 2 Certain DVD VIDEO does not operate as described in this manual due to the intentions of the disc s producers 3 Scratched or stained discs may not be played back 4 Some discs cannot be played back because of incompatible recording conditions characteristics of the recorder or special proper ties of discs 5 You can play back discs which bear the marks above If you use nonstandardized discs this Unit may not play them back Even if they are played back the sound or video quality will be compromised 6 You may play back the unfinalized DVD RW R recorded in the video format on our brand s DVD recorder However depending on the recording status of a disc the disc may not be played back at all or normally
4. that black bars may appear on Note s the top and bottom of the TV screen PROGRESSIVE SCAN e Select 4 3 PAN amp SCAN You can set PROG SCAN to PROGRESSIVE SCAN for a full height picture with OFF in DISPLAY menu or Default OFF both sides adjusted See note on the left e Select 16 9 WIDE if a press and hold gt PLAY wide screen TV is connected on this Unit on the DVD side TVASPECT 4 3 LETTER BOX 4 3 LETTER BOX to this Unit for more than 5 seconds during STILE MODE 20 STILL MODE playback until the P SCAN ROG SCAN or e Select AUTO usually indicator on this Unit turns off e If you select AUTO it e When PROG SCAN is ON automatically selects the best 4 resolution setting FRAME video signals from the Unit s or FIELD based on the VIDEO OUT and S VIDEO OUT If there is no picture es data characteristics of the jacks will be distorted or not be or you do not press Lar youe TV tas presta pictures default output at all any buttons for 15 NOTE ws es e If you select FIELD the picture in the still mode will Note s So hes n Ce A be stabilized SCAN will switch to eln i E ee e If you select FRAME the In QUICK menu OSD OFF and it will exit picture in the still mode will LANGUAGE TV ASPECT SETUP menu be highly defined PROG SCAN or DOLBY e An individual picture on the
5. Note Any product sold and identified as refurbished or renewed carries a ninety 90 day limited warranty Replacement product can only be sent if all warranty requirements are met Failure to follow all requirements can result in delay WHAT IS NOT COVERED EXCLUSIONS AND LIMITATIONS This Limited Warranty applies only to the new products that can be identified by the trademark trade name or logo affixed to it This Limited Warranty does not apply to any non Philips hardware product or any software even if packaged or sold with the product Non Philips manufacturers suppliers or publishers may provide a separate warranty for their own products packaged with the bundled product The Company is not liable for any damage to or loss of any programs data or other information stored on any media contained within the product or any non Philips product or part not covered by this warranty Recovery or reinstallation of programs data or other information is not covered under this Limited Warranty This warranty does not apply a to damage caused by accident abuse misuse neglect misapplication or non Philips product b to damage caused by service performed by anyone other than an Authorized Service Location c to a product or a part that has been modified without written permission or d if any serial number has been removed or defaced or e product accessories or consumables sold AS IS without warranty of any kind
6. Turning on Unit for the First Time 12 Audio Language 23 Clock SERIO asar oasis 12 Camera Angles coccion 23 Function OverVie Wense 13 Black Level Setting c cccccsssssssssssesssessesssessesssessessesseesee 23 Front Panel Indicator Lights sssssssseeessseeeenen 13 Stereo Sound Mode u cssssssesssesssessesssessesssesesssessessessees 23 Selecting DVD or VCR Operation eeseeeeeees 13 DVD Setting 24 Front amp Rear Terminals cc ccsscesssseceececeseeeeeeees 13 LANGUAGE Setting as 24 A n NE 25 Installing the Batteries for the Remote Control 14 AUDIO Setting 25 PARENTAL SOCLINE istorosicatasisesianenitaccnioiasineaaseo cc 26 MER PONEMOS OTHERS S tting icirasariad aaa 26 Playback 00000000000000000000000000000000000000000000000000000000000000000 15 Reset to the Default Setting Except for When You Playback a Cassette Tape Recorded in PARENTAL Setting csssssssssssssscsssssssssssssesessssesssssssssen 27 Hi Fi Stere sisas isaac 15 Other Oper ations scccccssrcsscescesccssscsccscesccences 15 INFORMATION Index SCAPE y POPE costar nec nsesenucetesiutoscat apeei pce svunecstones 15 Troubleshooting ssesssescsescssscssssesesssessscseesssesssessee 27 i de nn IU NA A a Specifications rs sscccvesssccssesscccssessesssscsecsssscsecesseeeeee 28 R no Pc poe i Language Code List sesssssssssssssssssssssssoeeseseeseevessas 28 AAA Ni 9 Limi Recording amp One touch Timer Recording OTR 16 inety
7. press 4 digit number to enter the code DISC MENU for the desired Language Refer to the FRENCH Language options are not available with Note s DISC MENU 1 e In QUICK menu OSD Default ENGLISH Language Code List on page 28 FRENCH LANGUAGE TV ASPECT ARA he Only the Languages supported by the menu DIGITAL are available QUICK aa AS OSD LANGUAGE 2 menu consists of the setting menu Default ENGLISH FRAN AIS e LANGUAGE setting for AUDIO Sats thel forth ESPA OL and SUBTITLE are not available with accompanied with LUKI ae ae ata alias some discs Then use AUDIO and You can make all settings in SUBTITLE Refer to page 23 CUSTOM menu frequently used and they are Continued on next page EN DISPLAY Setting You can change the display functions Follow steps 1 to 3 in the CUSTOM Menu section on page 24 4 Select the desired item 6 To exit TV ASPECT or TV ASPECT STILL MODE menu Default 4 3 LETTER BOX See note on the right warecT TVASPECT 43 LETTER BOX STILL MODE AUTO 4 3 PAN amp SCAN PROG SCAN OFF 129 WIDE y To complete DISPLAY menu PROG SCAN setting STILL MODE Default AUTO TVASPECT 4 3 LETTER BOX l STILL MODE AUTO See note on the right PROG SCAN OFF EO A N ote s TV ASPECT 4 3 LETTER BOX TV ASPECT al FIELD Select 4 3 LETTER BOX PROG SCAN OFF FRAME elect 4 SO
8. the cassette tape will rewind to the beginning 4 When selected length of time is reached playback will start automatically Continued on next page Auto Repeat When AUTO REPEAT is set to ONS the cassette tape will automatically rewind and start over when it reaches the end This will continue until auto repeat function is turned off CNUHS 1 Press SETUP and choose AUTO REPEAT mene 2 Press P gt to AUTO REPEAT to set ON or SMENU TIMER PROGRAMMING OFF TIMER PROGRAMMING SATELLITE LINK SATELLITE LINK gt AUTO REPEAT OFF gt AUTO REPEAT ON CLOCK SET gt CLOCK SET LANGUAGE SELECT LANGUAGE SELECT Press SETUP to exit e The auto repeat function can also be set ON or OFF by pressing REPEAT on the Remote Control e To cancel auto repeat function follow step 1 above Then press gt so that OFF appears beside AUTO REPEAT Press SETUP to exit e The auto repeat playback will start automatically if you select AUTO REPEAT to ON in the Stop mode Recordin This Unit has no tuner system so it cannot receive TV broadcasts without an External Tuner Cable Satellite or Converter Set top Box or such devices gt ELA Note s TV this Unit External Tuner e You can also set to External Tuner Refer to Satellite Link on page 18 Cable Satellite or Converter Set top Box Recording amp One touch Timer Recording OTR
9. the picture or sound may not be smooth etc In this case you need to finalize the disc with the DVD recorder Refer to the manual accompanying the DVD recorder 7 Only discs recorded in the video format and finalized can be played back Unfinalized discs cannot be played back Depending on the recording status of a disc the disc may not be played back at all the picture or sound may not be smooth etc 8 If the recorded portion of the disc is too small less than 2 3 16 inches 55 mm across it may not play back properly 9 Do not glue paper or put stickers on to the disc These may damage the disc and the Unit may not read it correctly 10 Discs recorded in the VR video recording format cannot be played back Unplayable Discs NEVER play the following discs as a malfunction may result DVD RAM DVD audio CD i photo CD video CD DVD with region codes other than 1 or ALL DTS CD DVD ROM for personal computers CD ROM for personal computers CD RW R with MP3 Windows Media Audio or JPEG files HD DVD Blu ray Disc On the following disc the sound MAY NOT be heard super audio CD Note s e Only the sound recorded on the normal CD disc layers can be delivered The sound recorded on the high density super audio CD disc layers cannot be delivered Any discs without compatibility indications and not mentioned in the Playable Media chart above are not playable Continued on next page EN SETUP
10. 90 day Limited Warranty ccseee0 29 Timer Recording cssscccecscsesessceesscescessceesessceresssees 16 Notes for Timer Recording amp One touch Timer Recording OTR scscsscsscssscsssesscecsssscerssssccesscseees 17 Satellite Liceras laicos 18 Copying a Cassette Tape ooooonccncnicnononicoccnnnnonononnoronanons 18 SS 6 n EN Introduction Welcome This DVD VCR Dual Player combines a Digital Video Disc DVD player and a Hi Fi Video Cassette Recorder VCR into one unit letting you play DVDs Audio Compact Discs Audio CDs and Video Cassettes on one piece of equipment Read this owner s manual carefully to learn how to use the features listed below VCR Features e Automatic Head Cleaner e Searching Time Index Forward and Reverse e English French and Spanish Menus and Displays e Slow Motion e 19 Micron head e Still Picture e Recording One Touch and Timer e Tape Counter e Repeat Playback e Tracking Adjustment e Satellite Link Disc Features e Audio Language choices e Parental Control e Resume On e Camera Angles e Paused Fast Slow Step by Step Playback e Specific Time Title Chapter Track Search e DVD menus in a desired language e Progressive Scan e Program Playback e Markers e Random Playback e Zoom e Subtitles e Repeat A B Repeat If available on the disc Package Contents The following items are provided with your new DVD VCR Dual Player e Remote Control and two
11. AAA 1 5 V batteries e One set of Audio red and white tips and Video yellow tips cables e This User Manual and Quick Start Guide Available Disc Features All features described in this manual are not available on every disc If the feature is not available on the disc you cannot use the DVD VCR Dual Player to make it available An X will appear in the top right corner of the TV screen if you try to access a feature that is not currently available EN Symbols Used in This Manual The following symbols appear in some headings in this manual TE Description refers to video cassette tapes Jee Description refers to DVD VIDEO Description refers to audio CD Q gt Note to CATV system installer e This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DOLBY DIGITAL Connecting to RF Modulator Not Supplied If your TV has antenna in jack only it is still possible to connect this Unit to your TV by using an RF modulator In this case follow the instructions below 1 Disconnect the power cords of the Uni
12. Connections Connection to a TV If your TV does not have AUDIO VIDEO input jack see the section Connecting to RF Modulator Not Supplied on page 8 VCR and Basic DVD Connection Available for DVD only DVD s picture quality analog audio standard picture good picture better picture O HE and or or el RCA audio cable RCA video cable S video cable This Unit in an UBIO S VIDEO fanto VIDEO OUT e AUDIO OUT VIDEO OUT S VIDEO OUT COMPONENT VIDEO OUT lied cables used in this connection are as follows e RCA audio cable L R x 1 e RCA video cable x 1 Please purchase the rest of the necessary cables at your local store Note s e Connect this Unit directly to your TV If RCA audio video cables are connected to a VCR pictures may be distorted due to the copy protection system e DIGITAL AUDIO OUT COAXIAL DVD AUDIO OUT S VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode If your TV is compatible with 525 480 progressive scanning and you want to enjoy that high quality picture for DVD playing You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode To set the mode set PROG SCAN to ON in DISPLAY menu so that the P SCAN indicator on this Unit lights up Refer to pages 24 25 for more details e When PROG SCAN is ON video signals from the Unit s VIDEO OUT and S VIDEO OUT ja
13. DIGITAL are available QUICK TV screen is called a frame menu consists of the setting which consists of two menu frequently used and they A separate images called field di e Some pictures may be blurred are accompanied with e W ely Koue if you select AUTO in the You can make all settings in y CUSTOM still mode due to their data menu characteristics AUDIO Setting Choose the appropriate audio setting for your device It is only affected during the playback of DVD discs Follow steps 1 to 3 in the CUSTOM Menu section on page 24 4 Select the desired item 6 To exit the menu DRC Dynamic Range Control Default ON Set to ON to compress the range between soft and loud sounds ON DOWN SAMPLING ON 7 DOLBY DIGITAL BITSTREAM N ote S DRC e This function is available ei only on the discs which are recorded in the Dolby Digital format DOWN SAMPLING DRC ON e When playing back a 96kHz DOWN SAMPLING_ ON disc with the copyright DOLBY DIGITAL BITSTREAM Dre JON Set to ON when outputting in 48kHz DOWN SAMPLING ON Set to OFF when outputting the original sound DOLBY DIGITAL BITSTREAM protection the sound will be down sampled at 48kHz even if the DOWN SAMPLING is DOLBY DIGITAL a Note s Default BITSTREAM This function ss only In QUICK menu OSD Set to BITSTREAM when the Unit is connecte
14. PROG SCAN OFF P25 Step 5 DOLBY DIGITAL BITSTREAM QUICK CUSTOM INITIALIZE e Refer to the sections LANGUAGE TV ASPECT PROG SCAN or DOLBY DIGITAL section on page 24 or 25 CUSTOM Menu You can change the Settings of the Unit on pages 24 25 indicates DVD setting menus also accessible from QUICK menu 3 Select the desired item a Av y ar y W SETUP menu 1 Press SETUP in the Stop mode 2 Select CUSTOM SETUP CUSTOM LANGUAGE DISPLAY QUICK QUICK AUDIO CUSTOM CUSTOM PARENTAL INITIALIZE INITIALIZE OTHERS LANGUAGE menu DISPLAY menu AUDIO menu PARENTAL menu OTHERS menu SETUP LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS PASSWORD AUDIO ORIGINAL TV ASPECT 4 3 LETTER BOX ON misa ANGLE ICON ON SUBTITLE OFF STILL MODE AUTO DOWN SAMPLING f DISC MENU ENGLISH PROG SCAN OFF DOLBY DIGITAL BITSTREAM OSD LANGUAGE ENGLISH page 25 LANGUAGE Setting Follow steps 1 to 3 in the CUSTOM Menu section above 4 Select the desired item 5 Select the desired Language 6 To exit the menu A or A A A r y LANGUAGE menu AUDIO 1 2 AUDO Default ORIGINAL Note s SETUP Sets the audio Language ENGLISH 4 SUBTITLE OFF SUBTITLE 1 2 some discs DISC MENU ENGLISH SUBTITLE _ i mn 7 5 OSD LANGUAGE ENGLISH Default OFF e If OTHER is selected on AUDIO Sets the subtitle Language BE SUBTITLE or DISC MENU screen
15. Previous P Next or Current Title O gt pe Hi Previous Pj Next If the disc has no chapters Note s e Depending on the disc being played back this function can also be performed by directly entering the desired chapter number with the Number buttons Refer to the manual accompanying the disc EN 1 Press SEARCH repeatedly until the time search display appears Using Time Search _ _ __ TOTAL 1 29 00 gt SEARCH Select a desired disc time by using the Number buttons within 30 seconds OOO EA 1 29 00 SHA BOG BE Note s e When there is no need to enter a number 0 appears automatically For example 0 0_ _ _ appears in the time search display if the total time of the title or track is less than 10 minutes e Press CLEAR to erase the incorrect input at step 2 e For audio CD time search is not available for programmed and random playback Marker Setting O co ES This function allows you to assign a specific point on a disc to be called back later To set a marker 1 Press MARKER gt MARKER 2 Select a marker Y errata iella fe aol ac d 7 gt 3 Press OK lele asis e9 aol ac 1 0 12 01 To return to the marker later 1 Press MARKER MARKER Y RBs sao TT 1 0 12 01 2 Select the marke
16. SELECT MENU 2 Select LANGUAGE SELECT Then press gt to go to next step TIMER PROGRAMMING SATELLITE LINK AUTO REPEAT OFF CLOCK SET gt LANGUAGE SELECT A or v gt gt 3 Select ENGLISH FRANCAIS or ESPANOL Then press CLEAR LANGUAGE SELECT gt gt ENGLISH ON FRANCAIS ESPA OL A Y Sl Note s e If you accidentally select Spanish or French and need English Press SETUP and choose SELEC IDIOMA or SELECTION LANGUE Press gt and select ENGLISH Finally press CLEAR Clock Setting JCS Press SETUP and select CLOCK SET Then press P gt to go to next step MENU TIMER PROGRAMMING SATELLITE LINK AUTO REPEAT OFF gt CLOCK SET LANGUAGE SELECT e If the clock is not set CLOCK SET menu appears when you press SETUP In this case go to step 2 CLOCK SET 2 Select the current month Then press P gt to go to next step v gt gt MONTH DAY YEAR 10 HOUR MINUTE AM PM A or 3 Select the current day CLOCK SET Then press P gt to go to next step MONTH RAX YEAR v gt gt HOUR MINUTE AM PM A or 4 Select the current year CLOCK SET Then press P gt to go to next step v gt gt MONTH DAY YEAR 10 02 TUE2012 HOUR MINUTE AM PM A or CLOCK SET 5 Select the current hour Then press P to go to next step v gt gt MONTH DAY
17. YEAR 10 02 TUE 2012 HOUR MINUTE AM PM D55 A or CLOCK SET 6 Select the current minute Then press P gt to go to next step MONTH DAY YEAR 0 02 TUE 2012 HOUR MINUTE AM PM 05 40 v gt gt A or CLOCK SET Y Select AM or PM MONTH DAY YEAR 10 02 TUE 2012 A or VW HOUR MINUTE _ AM PM 05 40 P EAM gt PM 8 Press SETUP to exit CLOCK SET menu Note s e To go back press lt 4 during steps 2 to 7 e Clock setting will be lost after a power failure or this Unit has been unplugged for more than 30 seconds Continued on next page EN Function Overview Front Panel Indicator Lights Lights up when the progressive scan system is activated Lights up during a recording or one touch timer recording OTR Blinks when a recording is paused Lights up when this Unit is in the DVD mode Lights up when the inserted disc is being played back Blinks when an unplayable disc is inserted Lights up when the Unit is turned on Lights up when this Unit is in the VCR mode Lights up when the timer recording or one touch timer recording OTR has been set Selecting DVD or VCR Operation You must first select either DVD or VCR operation VCR MODE Press VCR on the Remote Control The VCR SOURCE light will illuminate DVD MODE Press DVD on the Remote Control
18. by including refurbished Philips product sold AS IS by some retailers This Limited Warranty does not cover e Shipping charges to return defective product e Labor charges for installation or setup of the product adjustment of customer controls on the product and installation or repair of antenna signal source systems outside of the product Product repair and or part replacement because of improper installation or maintenance connections to improper voltage supply power line surge lightning damage retained images or screen markings resulting from viewing fixed stationary content for extended periods product cosmetic appearance items due to normal wear and tear unauthorized repair or other cause not within the control of the company e Damage or claims for products not being available for use or for lost data or lost software Damage from mishandled shipments or transit accidents when returning product A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications e A product used for commercial or institutional purposes including but not limited to rental purposes e Product lost in shipment and no signature verification receipt can be provided e Failure to operate per Owner s Manual TO OBTAIN ASSISTANCE IN THE U S A CANADA P
19. call a customer service representative please know the model number and serial number of your product before you call This information is displayed on the back of the product Also please take a moment to identify the problem you are having and be prepared to explain this to the representative If you believe the representative will need to help you with operations please stay near the product Our representatives will be happy to assist you For online reference please visit our website at www philips com support Cleaning the Cabinet e Wipe the front panel and other exterior surfaces of the unit with a soft cloth e Never use a solvent thinner benzene or alcohol to clean the unit Do not spray insecticide liquid near the unit Such chemicals may discolor the surface or damage the unit Cleaning Discs e When a disc becomes dirty clean it with a cleaning cloth Wipe the disc from the center to the outside of the disc Do not wipe in a circular motion e Do not use solvents such as benzene thinner commercially available cleaners detergent abrasive cleaning agents or antistatic spray intended for analog records Cleaning the Disc Lens e If the DVD drive in this unit is having problems reading discs please refer to the relevant sections in the Troubleshooting section of this user manual to perform basic troubleshooting If this does not work try a lens cleaning disc At this point if you are still having trouble reading discs please call
20. clear numbers entered e To cancel the point for A B incorrectly repeat e To cancel the point for A B repeat e To call up the disc menu on a disc Sl e To display the current disc e To display the current disc e To display the current time tape mode mode counter and L1 or L2 e To select DVD output mode e To select the DVD output mode OEA activate DVD mode AO activate DVD mode Neur pte select input L1 or L2 play randomly e To select an item on z f the VCR menu Install two AAA batteries supplied E y S To advance to the wo ye ee e To move the cursor and e To move the cursor and matching the polarity indicated inside determine its position determine its position Ao acia the battery compartment of the Remote WS S e ea Control timer programming 1 e To forward backward a tape e To begin slow forward playback in the pause mode E 2 gt a A e To exit the VCR menu e To reset the tape counter Jt al o LY gt gt e o a 3 SPEED MODE PHILIPS Installing the Batteries for the Remote Control e To pause tape playback or recording e To advance playback one frame at a time o e To begin disc playback To begin disc playback To begin disc playback disc playback o begin tape playback o begin tape playback tape playback Keep in mind the following when using the e To skip chapters or titles e To skip
21. during playback picture search Use gt gt or lt lt lt F FWD gt gt or REW lt on this Unit e Press it again and the Unit will search in super high speed in only the SLP mode To freeze the picture on TV screen during playback still mode Press II PAUSE Each time you press the button the picture will be forwarded one frame at a time e If the picture begins to vibrate vertically in the still mode stabilize the picture by using TRACKING A yw e If the picture is distorted or rolling vertically adjust the vertical hold control on your TV if equipped To Reset the Cassette Tape Counter counter reset Press DISPLAY to display the cassette tape counter on the TV Press CLEAR to reset the counter to 0 00 00 Index Search To search by index mark The index mark will be made automatically at the beginning of each recording WAN Zire Os e Insert a cassette tape into this Unit Press SEARCH once INDEX SEARCH SEARCH 2 To select index mark INDEX SEARCH 03 01 20 beginning of current program dof th A or v de Contents content 02 01 01 02 03 3 To rewind lt lt lt To fast forward gt PLAY gt en index mark is reached When ind ki hed playback automatically begins Note s e The time gap between index marks should be more than 1 minute for SP mode 2 minutes for LP mode and 3 minutes for SLP mode To play back in slow moti
22. our customer support center for further troubleshooting Continued on next page EN Caring for Video Cassettes e Use only cassettes with the mark e Remove any light adhesive stick on notes from the video cassette before putting the cassette in the VCR Removable labels can jam the VCR Caring for the VCR s Video Heads e Periodic maintenance is required to maintain your DVD VCR Dual Player s excellent performance The VCR has an Automatic Head Cleaner However the video heads will require replacement eventually Only an authorized service center should perform this service Disc Handling e Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs e Always store the disc in its protective case when it is not used e Note that discs with special shapes heart shaped discs octagonal discs etc cannot be played back on this unit Do not attempt to play such discs as they may damage the unit Testing the Remote Control e If the remote control is not working properly you can use a digital camera including a cellular phone with built in camera to see if it is sending out an infrared signal Please note that some cell phone cameras with IR filters will not work You can verify if your cell phone camera is suitable for this test by using other working remotes in your house and see if they flash How to perform the test o 1 Point the IR transmitter of the remote control towards the lens of the d
23. reported to P amp F USA will be adapted and published on the P amp F USA support website as soon as possible Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Service Centers and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in this manual any adjustments or assembly procedures not recommended or authorized in this manual shall void the warranty Important Registering your model with Philips makes you eligible for all of the valuable benefits listed below so don t miss out Register online at www productrecords com phl to ensure Product Safety Notification By registering your product you receive notification directly from the manufacturer in the rare case of a product recall or safety defect Additional Benefits of Product Ownership Registering your product guarantees that you receive all of the privileges to which you re entitled including special money saving offers For further assistance For further assistance call the customer support service in your country To obtain assistance in the U S A Canada Puerto Rico or the U S Virgin Islands contact Philips Customer Care Center at 1 866 310 0744 about how to recycle the packaging For Product recycling information please visit www recycle philips com Disposal of used batteries The batteries supplied do not conta
24. speed is 1 1 16x 2 1 8x 3 1 2x Note s e To cancel resume press i STOP one more time in the Stop mode e The resume playback information stays on even when the power is turned off as long as the disc stays in the Unit e Set STILL MODE to FIELD in DISPLAY menu if pictures in the slow playback mode are blurred Refer to pages 24 25 Zoom Pause and Step by Step Playback ED DVD Re 1 Press ZOOM during playback Press Il PAUSE cups playback m 2 Press ZOOM repeatedly to select the required zoom factor To continue playback press gt PLAY 2x 4x or off CED CO The disc goes forward by one frame each time H PAUSE is pressed in the pause mode To continue playback press D gt PLAY 3 Press A V 1 lt 4 gt to slide the zoomed picture across the TV screen Note s 4 To exit zoom mode press ZOOM to select OFF e For DVD set STILL MODE to FIELD in DISPLAY menu if pictures in the pause mode are blurred Refer to pages 24 25 e Zoom function does not work while the disc menu is displayed To use PREV H4 4 NEXT PPI 7 on this Unit e 4x zoom is not available on some discs 2 e The picture may be distorted when you press II PAUSE or lt a BAYAD O CO repeatedly in the zoom mode Gov Q S e In the zoom mode it automatically changes x2 x4 to the zoomed Press once to skip chapters tracks or titles to a desi
25. television 7 S VIDEO OUT jack Connect an S video cable from here to the S video input jack on your television 8 DIGITAL AUDIO OUT COAXIAL jack Connect a digital audio coaxial cable from here to the digital audio input jack on your digital audio receiver For enhanced DVD viewing DVD VCR video and audio connections required to view cassette tapes Note s e Audio and video cables are included for both VCR and DVD viewing You can enhance your DVD picture and sound quality with an S video cable a component video cable or a digital audio coaxial cable Please purchase the necessary cables at your local store Refer to pages 10 11 Continued on next page 13 EN Remote Control OPEN CLOSE INPUT ZOOM MARKER 4 A B ANGLE SEARCH REPEAT REPEAT e To select chapter or title directly To select track directly e To search forward backward through a disc e To search forward backward e To begin slow forward reverse through a disc playback in the pause mode e To repeat between your chosen To repeat between your point A and B chosen point and B e To select camera angles on a disc e To select audio languages ona To select STEREO L ch or pS ee del se aia disc R ch mode during playback Hi Fi tapes only e To clear the markers e To clear the markers e To remove status number in e To clear numbers entered program input incorrectly e To
26. the Unit in a horizontal and stable position Do not place anything directly on top or bottom of the Unit Depending on your external devices noise or disturbance of the picture and or sound may be generated if the Unit is placed too close to them In this case please ensure enough space between the external devices and the Unit e Depending on the environment the temperature of this Unit may increase slightly This is not a malfunction e Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the Unit Dew Condensation Warning e Dew condensation may form inside the Unit in the following conditions If so do not use this Unit at least for a few hours until its inside gets dry The Unit is moved from a cold place to a warm place Under conditions of high humidity After heating a cold room Notice for Progressive Scan Use Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture In case of picture problems with 525 480 progressive scan output it is recommended that the user switch the connection to the standard definition output If there are questions regarding your TV set compatibility with this 525p 480p DVD player please contact our customer service center Maintenance Servicing e Please refer to relevant topics on Troubleshooting on page 27 when trouble is found e If you need to
27. LE appears on the TV screen it means audio Language is not available e Some discs will only allow you to change the audio setting from the disc menu Refer to the manual accompanying the discs for details Camera Angles CRB Co Some DVD may contain scenes which have been shot simultaneously from various angles You can change 5 the camera angle if the ANGLE ICON appears on the TV screen If the ANGLE ICON is set to OFF in OTHERS menu it will not appear Refer to pages 24 26 Press ANGLE during playback O gt Each time you press ANGLE camera angle changes Black Level Setting CAB CO Adjust the black level to make the dark areas of the TV picture brighter Press MODE during playback 1 g play gt gt MODE 2 Press OK to adjust I OFF the black level ON makes the dark areas brighter OFF shows the original picture as recorded 3 Press BACK D to exit BACK Stereo Sound Mode la This Unit allows you to select a sound mode Ov 4 during CD playback Press AUDIO during CD playback DI STEREO gt lv Each time you press AUDIO sound mode changes as example below STEREO right and left channels are active L ch left channel is active R ch right channel is active 2 Select the desired item Ar y SETUP SETUP menu Confirm that QUICK is selected aN Ra
28. Press gt PLAY to start programmed playback o 7 Note s e Press CLEAR at step 2 to erase the most recently entered track e To erase all programmed tracks at once select ALL CLEAR and press OK at step 2 e While a program is being played back i STOP works as follows Press W STOP and P gt PLAY next so that the programmed playback restarts CD playback restarts from the current point Press i STOP twice and gt PLAY next so that playback restarts from the first track in the original order However your programmed playback can be restarted when you follow the above steps Your programs are still stored until either the disc tray is open or power is turned off e To repeat the current track in the program press REPEAT repeatedly until C TRACK appears during playback e To repeat the entire program press REPEAT repeatedly until GS ALL appears during playback EN Special Settings Subtitle Language This Unit allows you to select a subtitle Language if available 1 Press SUBTITLE during playback during DVD playback 1 ENG 6 gt a Each time you press SUBTITLE subtitle Language changes as example below y OFF no subtitles y ENG English subtitles y FRE French subtitles To cancel subtitle 1 Press SUBTITLE during playback 1 ENG 6 gt SUB TITLE 2 Press gt gt to set
29. Register your product and get support at DVP3355V www philips com support EN User Manual FR Manuel d Utilisation ES Manual del Usuario For further assistance call the customer support service in your country To obtain assistance in the U S A Canada Puerto Rico or the U S Virgin Islands contact Philips Customer Care Center at 1 866 310 0744 Pour obtenir de laide suppl mentaire communiquez avec le centre de service a la clientele de votre pays e Pour obtenir de l aide aux Etats Unis au Canada a Puerto Rico ou aux les Vierges am ricaines communiquez avec le centre de service a la clientele Philips au 1 866 310 0744 Para obtener m s informaci n llame al servicio de soporte al cliente de su pa s e Para obtener asistencia en los Estados Unidos en Canad Puerto Rico o en las Islas Virgenes de los Estados Unidos comun quese con Centro de atenci n al cliente de Philips al 1 866 310 0744 Lea este manual antes de usar el product EN To obtain a more detailed electronic copy of this manual go to www philips com support FR Pour obtenir une copie lectronique plus d taill e de ce manuel allez sur www philips com support ES Para obtener una copia electronica m s detallada de este manual visite www philips com support PHILIPS Register online at www productrecords com phl today to get the very most from your purchase Registering your model with Philips makes you eligible for all of the valuab
30. The Remote Control might affect another device s operation e Always use video quality shielded cables with RCA type connectors Standard audio cables are not recommended e L2 input jacks are on the front of this Unit e Please purchase the necessary cables at your local store Refer to page 11 EN DVD FUNCTIONS Playback Before Turn on the TV amplifier and any other components which are connected to this Unit Make sure the TV and audio receiver not supplied are set to the correct channel CD OD K 2 Inserta disc with Label Facing Up Lights up when power is on Note s e gt lt may appear at the top right on the TV screen when the operation is prohibited by S lt the disc or this Unit e Some DVD may be played from title 2 or 3 due to specific programs e During the playback of a 2 layered disc pictures may stop for a moment This happens while the 1st layer is being switched to the 2nd layer This is not a malfunction e You can change the on screen language for DVD function in OSD LANGUAGE menu Refer to page 24 Disc Menu Fast Forward Reverse Search CED C gt CD Z C gt Some discs contain menus which allow you to customize DVD Press gt gt or lt 4 repeatedly during playback to playback Use A V 4 gt to select an item then press OK select the required forward or r
31. UERTO RICO OR U S VIRGIN ISLANDS Contact Customer Care Center at 1 866 310 0744 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusions or limitation of incidental or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may have other rights which vary from state province to state province P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 29 EN PHILIPS P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 U S A P amp F Mexicana S A de C V Av La Palma No 6 Col San Fernando La Herradura Huixquilucan Edo de M xico C P 52787 Meet Philips at the Internet http www philips com support Be responsible Respect copyrights Printed in China 2 MN00109 AAA E8E6EUH Philips and Philips Shield are used under O 2VMNOO 10 9 license of Koninklijke Philips N V
32. ades adult general children can be played back e 7 NC 17 no one under 17 admitted If you have set a password e 6 R restricted under 17 requires accompanying parent or adult guardian already enter the current 4 digit e 5 PGR parental guidance recommended password e 4 PG13 unsuitable for children under 13 e 3 PG parental guidance suggested e 2 G general audience PASSWORD _ _ e 1 KID SAFE Enter current password Note s i A Eo an Y e Some DVD video may not respond to PARENTAL setting Make sure this function works with your DVD video e The resume information will be cleared if you change the parental level when the resume information is on To Change the Password for Parental Controls You can change your password for parental controls Follow steps 1 to 3 in the CUSTOM Menu section on page 24 suitable for children 4 Enter current 4 digit password 5 Select PASSWORD 6 Enter your new 7 To exit the menu CHANGE 4 digit password except for 4737 Ar y Note s PARENTAL LEVEL ALL e Record the password in PASSWORD CHANGE case you forget it PARENTAL menu e If you forget the Eur password press 4 7 3 7 at step PARENTAL PASSWORD Please enter a 4 digit password O o Enter current password 4 then enter your new password Password will be cleared and parental levels will be set to ALL E OTHERS Setting You can change the other functions Fo
33. adio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the device and the receiver 3 Connect the device into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help Disconnect the mains plug the AC plug to shut the Unit off when trouble is found or when not in use The mains plug the AC plug shall remain readily available CAN ICES 3 B NMB 3 B CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type WARNING Batteries Battery pack or battery installed shall not be exposed to excessive heat such as sunshine fire or the like LASER SAFETY This apparatus is classified as a CLASS 1 LASER PRODUCT This apparatus employs a laser Only a qualified service person should remove the cover or attempt to service this apparatus due to possible eye injury CAUTION Use of con
34. audio cable L R x 1 e RCA video cable x 1 Please purchase the rest of the necessary cables at your local store Special Note when connected to an External Tuner Cable Satellite or Converter Set top Box e Only the active channel on your External Tuner may be viewed or recorded when connected to this Unit Do not change channels during a recording You cannot record on the active channel while viewing another channel e Always use the LEFT white audio output jack from the External Tuner to ensure that the audio is mixed down correctly to mono for this Unit If you use the RIGHT red jack you will record the right audio only Continued on next page Preparation for Use Turning on Unit for the First Time AN a Please note most instructions in this manu ES ed Y HS al refer to Remote Control use 1 Be sure your TV s input is set to VIDEO Name may vary with TV manufacturer See your TV manual for details LANGUAGE SELECT 2 Select your on screen language Then press gt to continue gt gt ENGLISH ON FRANCAIS ESPA OL O gt a v gt o 3 When CLOCK SET menu appears go to step 2 in Clock Setting on this page CLOCK SET MONTH DAY 10 HOUR MINUTE AM PM v gt gt a A or To Change the Selected On screen Language MENU 1 Press SETUP until the main menu appears gt TIMER PROGRAMMING SATELLITE LINK AUTO REPEAT OFF CLOCK SET LANGUAGE
35. cks will be distorted or not be output at all for DVD playing The picture will be OK for VCR use from the VIDEO OUT jack If your TV is not compatible with progressive scanning Use this Unit in interlace mode and set PROG SCAN to OFF either in DISPLAY menu or by pressing and holding D gt PLAY on the front of the Unit on the DVD side for more than 5 seconds or until the P SCAN indicator on this Unit turns off After connecting to your TV You will need to switch to a VIDEO input on your TV This is usually marked INPUT SOURCE TV VIDEO or AUX Please refer to your TV Owner s manual for details Continued on next page 10 EN Connection to an Audio System Playing 2 Channel Analog Audio stereo system analog audio input jacks AUDIO OUT lied cables used in this connection are as follows e RCA audio cable L R x 1 Please purchase the rest of the necessary cables at your local store Playing Multi Channel Digital Audio Dolby Digital decoder MD deck or DAT deck coxa digital audio RETo digital audio coaxial Th i S U n it DIGITA AUDIO S VIDEO FOMPONENT AUDIO ORT OUT our MiDEO OUT COAXIAL DIGITAL AUDIO OUT Setting SETUP gt QUICK gt Connection DOLBY DIGITAL Connecting to a Dolby Digital decoder for Dolby Digital audio output BITSTREAM Connecting to other device an MD deck or DAT deck etc without Dolby Digital decoder PCM To c
36. d to a Dolby Digital decoder pi E reieee m LANGUAGE TV ASPECT BITSTREAM outputs Dolby Digital signals Pra PROG SCAN or DOLBY e PCM converts the Dolby Digital into PCM 2 channel DIGITAL are available QUICK i l DRC ON menu consists of the setting DONNAIN ON menu frequently used and they BITSTREAM are accompanied with You can make all settings in Continued on next page CUSTOM menu D PARENTAL Setting This function prevents Unit from playing material inappropriate for children Parental Levels Parental level allows you to set the rating levels on your DVD software Playback will stop if the ratings exceed the levels you set Follow steps 1 to 3 in the CUSTOM Menu section on page 24 5 Select PARENTAL Select the desired level To exit the menu LEVEL 4 Enter your desired 4 digit password expect for 4737 o w o C 053 5 Ge Co PARENTAL LEVEL ALL PARENTAL LEVEL PASSWORD CHANGE 8 ADULT 7 NC 17 PARENTAL menu SETUP CONTROL LEVELS e ALL all parental locks are cancelled ee aa e Level 8 DVD software of any grades adult general children can be played back e Levels 7 to 2 only DVD software intended for general use and children can be played back e Level 1 only DVD software intended for children can be played back with those intended for adult and general use prohibited TIPS FOR LEVELS e 8 ADULT DVD software of any gr
37. de A ae v PROGRAM NUMBER 1 DATE 1 0 0 2 FUE TIMER START TIME gt E TIME ASE SET REC SPEED e TIMER REC indicator on this Unit lights up and the Unit goes to A r y gt gt the DVD mode e You can program the Unit to record up to 8 programs for up to a year in advance Note s eT back tep during steps 3 to 9 5 Select the desired starting time hour Opn oa eane stapi press AN Aung ntp o e Select L1 to activate rear input jacks Select L2 to activate front input jacks Then press P gt to go to next step ONE TIME PROGRAM A r wy PROGRAM NUMBER 1 ee eee To check correct or cancel a timer program END TIME 22 gt E D ae 1 Press TIMER SET then VCR on the Remote Control 2 Press SETUP to call up the main menu A r Y gt 3 Select TIMER PROGRAMMING by using A Ww then press gt 6 Select AM or PM ONE TINE PERGAM 4 Select the program number which you want to check by using Then press P gt to go to next step PATE 10 02 TUE a V The details of the program you selected will appear e UA on the TV screen A r y U A e Go to the digit you want to change by using lt 4 Then enter correct numbers by using A V 7 Repeat the procedure in steps 5 and 6 to set the ending time e You may cancel the entire program by pressing lt 4 while the program number blinks gt 5 Press CLEAR to exit 6 Press TIMER SET to re
38. deo heads 4 heads Dimensions W 17 3 16 435 mm Output signal format NTSC color H 3 3 4 94mm Power source 120VAC 10 60Hz 0 5 D 9 3 16 233 mm Power consumption 16W standby 0 5 VV Weight Approx 5 63lbs 2 55 kg 41 F 5 C to 104 F 40 C e Designs and specifications are subject to change without notice e If there is a discrepancy between language translations the default language understanding will be in English Language Code List Operating temperature Language Code Language Code Language Code Language Code French FRE 5264 Macedonian 5957 Siswat 6565 Abkhazian 4748 Frisian 5271 Malagasy 5953 Slovak SLO 6557 Afar 4747 Galician 5358 Malay 5965 Slovenian 6558 Afrikaans 4752 Georgian 5747 Malayalam 5958 Somali 6561 Albanian 6563 German GER 5051 Maltese 5966 Spanish SPA 5165 Amharic 4759 Greek GRE 5158 Maori 5955 Sundanese 6567 Arabic 4764 Greenlandic 5758 Marathi 5964 Swahili 6569 Armenian 5471 Guarani 5360 Moldavian 5961 Swedish SWE 6568 Assamese 4765 Gujarati 5367 Mongolian 5960 T Aymara 4771 Hausa 5447 Nauru 6047 Tagalog 6658 Azerbaijani 4772 Hebrew 5569 Nepali 6051 Tajik 6653 Bashkir 4847 Hindi 5455 Norwegian NOR 6061 Tamil 6647 Basque 5167 Hungarian HUN 5467 O Tatar 6666 Bengali Bangla 4860 l K Occitan 6149 Telugu 6651 Bhutani 5072 Icelandic ICE 5565 Oriya 6164 Thai 6654 Bihari 4854 Indonesian 5560 Oromo Afan 6159 Tibetan 4861 Bislama 4855 Interlingua 5547 Panjabi 6247 T
39. everse speed or gt PLAY To use PREV 44 NEXT gt gt on this Unit Pressing and holding PREV I lt or NEXT gt P on this Unit Calling Up a Menu Screen during Playback will also change forward or reverse playback speed Jee EXD To continue playback press gt PLAY Press DISC MENU to call up the disc menu Note s e Press TITLE to call up the title menu e For DVD fast forward or reverse search speed is different depending on the disc Approximate speed is 1 2x 2 8x 3 20x 4 50x 5 100x e For audio CD approximate speed is 1 2x 2 8x 3 30x Note s e Menu operations may vary depending on the disc Refer to the manual accompanying the disc for details Slow Forward Reverse Search Resume Playback Cs o o Press gt gt or lt lt lt repeatedly in the pause mode to select the required forward or reverse speed Press W STOP during playback To use PREV 4 4 NEXT gt P on this Unit Resume message will appear on the Pressing and holding PREV 4 or NEXT PPI on this Unit in TV screen l oN the pause mode will also change forward or reverse playback speed Press gt PLAY playback will T nanan da Fi To continue playback press gt PLAY resume from the point at which press STOP first and then PLAY playback was stopped e g DVD Note s e Slow forward or reverse speed is different depending on the disc Approximate
40. f the audio component e Correct the audio output settings e Correct the input settings on the audio component No DTS audio is output e This Unit does not support DTS audio This is not a malfunction Distorted picture e Connect this Unit directly to the TV e There are some cases where pictures may be slightly distorted and those are not a sign of a malfunction e Although pictures may stop for a moment this is not a malfunction Refer to page 19 e Check if the progressive mode is set correctly according to your TV Refer to pages 24 25 Audio or subtitle language does e The selected language is not available for audio or subtitles on the DVD not match the setting This is not a malfunction The camera angle cannot be e The DVD does not contain sequences recorded from different camera angles changed This is not a malfunction Audio or subtitle Language e The DVD does not contain audio source or subtitles in the selected Language cannot be changed This is not a malfunction on the TV screen e That operation is prohibited by this Unit or the disc tato an operation This is not a malfunction e Some functions are not available in specific modes but this is not a malfunction Read the description in this manual for details on correct operations e Playback from a desired track and random playback are not available during programmed playback e Some functions are prohibited on some discs EN Specifications Vi
41. he terms set forth below WHO IS COVERED This product is warranted to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase Warranty Period from an Authorized Dealer The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof WHAT IS COVERED This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period At its option the company will either 1 repair the product at no charge using new or refurbished replacement parts or 2 exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory or 3 refund the original purchase price of the product The Company warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety 90 days or for the remaining portion of the original product s warranty whichever provides longer coverage for you When a product or part is exchanged any replacement item becomes your property and the replaced item becomes the company s property When a refund is given your product becomes the company s property
42. icator on this Unit flashes if there are no more timer recordings on standby e The Unit goes to the DVD mode and all the VCR functions will be unavailable All the DVD functions are available during one touch timer recording timer standby mode and timer recording e Press STOP EJECT W 4 on this Unit or TIMER SET on the Remote Control to use the VCR when the Unit is turned off e Press SOURCE on this Unit or VCR on the Remote Control to use the VCR when the Unit is turned on In case timer recording is in standby mode press STOP EJECT W 4 on this Unit or TIMER SET on the Remote Control and then press SOURCE on this Unit or VCR on the Remote Control If you want to use the DVD player during a timer recording or while TIMER REC indicator on this Unit is on or blinking e Press to turn on the Unit Press DVD on the Remote Control to choose DVD mode then continue with the other DVD features as described in this manual Note for timer recording e If there is a power failure or the Unit is unplugged for more than 30 seconds clock time setting and ALL timer programs will be lost When power is restored or Unit is plugged in again the clock and timer programs will need to be set up again Continued on next page EN Satellite Link You can set the Unit to start recording whenever it detects a video signal from the External Tuner Cable Satellite or Converter Set top Box Preparing for the Satellite Link Timer Record
43. igital camera or cell phone camera 2 Turn on the digital camera and look at the IR transmitter of the remote control through the LCD display of the digital camera 3 While looking at the LCD press the buttons on your remote control you want to test a lf your remote control is working properly the IR transmitter of the remote control will create a noticeable flash on the LCD of the digital camera b If it does not flash replace the batteries in your remote with new batteries and try again If it still does not flash your remote control may be damaged or defective Please contact customer service for replacement options Notice Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips N V or their respective owners P amp F USA reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained P amp F USA warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied P amp F USA cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors
44. igrinya 6655 Breton 4864 Interlingue 5551 Pashto Pushto 6265 Tonga 6661 Bulgarian BUL 4853 Inupiak 5557 Persian 5247 Tsonga 6665 Burmese 5971 Irish IRI 5347 Polish POL 6258 Turkish TUR 6664 Byelorussian 4851 Italian ITA 5566 Portuguese POR 6266 Turkmen 6657 Japanese JPN 5647 Quechua 6367 Twi 6669 Cambodian 5759 Javanese 5669 Rhaeto Romance 6459 U Z Catalan 4947 Kannada 5760 Romanian RUM 6461 Ukrainian 6757 Chinese CHI 7254 Kashmiri 5765 Russian RUS 6467 Urdu 6764 Corsican 4961 Kazakh 5757 Uzbek 6772 Croatian 5464 Kinyarwanda 6469 Samoan 6559 Vietnamese 6855 Czech CZE 4965 Kirghiz 5771 Sangho 6553 Volapuk 6861 Danish DAN 5047 Kirundi 6460 Sanskrit 6547 Welsh 4971 Dutch DUT 6058 Korean KOR 5761 Scots Gaelic 5350 Wolof 6961 English ENG 5160 Kurdish 5767 Serbian 6564 Xhosa 7054 Esperanto 5161 L N Serbo Croatian 6554 Yiddish 5655 Estonian 5166 Laothian 5861 Sesotho 6566 Yoruba 7161 Latin 5847 Setswana 6660 Zulu 7267 Faroese 5261 Latvian Lettish 5868 Shona 6560 Fiji 5256 Lingala 5860 Sindhi 6550 Finnish FIN 5255 Lithuanian 5866 Singhalese 6555 If you choose a Language that has a 3 letter language code the code will be displayed every time you change the audio or subtitle language setting on page 23 If you choose any other languages will be displayed instead 3 letter language code is written in bracket EN Ninety 90 day Limited Warranty WARRANTY COVERAGE This warranty obligation is limited to t
45. in the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations Environmental Care LAY The packaging of this product is intended to be recycled Contact your local authorities for information eS EN Contents Safety Informations cccccccccccccccccssscscsccecooees 2 DVD FUNCTIONS Introduction 7 oe ee Playback taras 1 Symbols Used in This Manual oooooioo moooooo o 8 a Displa 20 Connetting to RF Modulator Not E O 8 Po Search FUNCTIONS sxsssccessesssssecasestieneveceadssssensenssensaaets 21 About Cassette Tapes and Discs ccccccccceees 9 Usina Track Search 21 Plenaria Po Proa Using la Chapter Sear ces cacaos 21 A a Using Time S areh ss scccscccsscsssseszansacees szsacoescesasecsneasetsnses 21 SETUP Marker Secta nea 21 c Repeat Random Programmed Playback 22 One chona A 10 Repeat Playback oooocoonoonmononcmoomsmsms 22 Connection to a TV co PE E E E 10 Repeat A B Playback cocos 22 Connection to an Audio System eeeseeeteeeeeeeees 11 Random Playback 22 Conn ion oan Eee Tae Gave satelite ci cm nico a or DTV to analog TV Converter Set top box 11 Pd eer Pla DCI E GE E pecial Setters 23 Preparation for Use csvssessessessessossescesenssesessenees 14 Subtitle Language ccscssscscsscssssssceccsssceessstseesecseseees 23
46. ing Preparation on the tuner e Satellite link accepts only the connection from L1 rear with the External Tuner Cable Satellite or Converter Set top Box The connection from L2 cannot read any signals from the External Tuner e The External Tuner Cable Satellite or Converter Set top Box should be equipped with some kind of timer function Using timer function for the tuner set it to output audio video signals when it comes to the time you want to start recording and to stop an output of audio video signals when it comes to the time you want to finish the recording Refer to the External Tuner s manual on how to set the timer e Make sure to turn off the External Tuner when you finish setting it up 1 Press SPEED to select the desired tape speed Recording playback time Tape speed Type of tape T120 T160 TA Bhours sP SLP mode 2 In Stop mode press SETUP MENU 3 Select SATELLITE LINK Then press gt to go to next step v gt gt TIMER PROGRAMMING gt gt SATELLITE LINK AUTO REPEAT OFF CLOCK SET LANGUAGE SELECT A or 4 Set the desired start hour SATELLITE LINK Then press gt to go to next step A or v gt gt e The hour can be selected from 1 12 with AM or PM e When the External Tuner Cable Satellite or Converter Set top Box signal is stopped recording will be stopped Note s Preparation on this Unit L1 External Tuner Cable Satellite or Co
47. lapped e g In case the timer recording is programmed in the middle e g In case the timer recording is overlapped on the existing on the existing timer recording of the satellite link timer recording satellite link timer recording timer recording timer recording satellite link satellite link recording result recording result Copying a Cassette Tape timer recording satellite link Warning Unauthorized recordings of copyrighted cassette tapes may be an infringement of copyright laws 1 Insert a pre recorded cassette tape into another external device for playback 2 Insert a recordable cassette tape into this Unit for recording 3 Press SPEED on the Remote Control to select recording speed SP or SLP 4 Press INPUT on the Remote Control to select L1 or L2 Choose L1 if device is connected to rear input jacks or L2 if connected to the front input jacks Refer to Front amp Rear Terminals on page 13 for more details 5 Press REC on the Unit 6 Press PLAY button on the external device 7 To stop recording press STOP EJECT W 4 on this Unit then stop playback of the external device output jacks of external device 14 rear of the Unit RCA audio video cables You can use a video disc player Cable Satellite Set top Box or other audio video component with audio video output jacks e For best results during dubbing use buttons on this Unit whenever possible
48. le benefits listed below so don t miss out Register online at www productrecords com phl to ensure Product Safety Notification Additional Benefits By registering your product you ll receive notification Registering your product guarantees that you ll directly from the manufacturer in the rare case of a receive all of the privileges to which you re entitled product recall or safety defect including special money saving offers Know these safety symbols CAUTION The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the RISK ONO presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude CAUTION TO REDUCETHE RISK OF to constitute a risk of electric shock to persons ELECTRIC SHOCK DO NOT REMOVE COVER OR The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON THE APPARATUS CAUTION To prevent electric shock match wide blade of plug to wide
49. le only during playback Press A B REPEAT at your desired starting point A O gt ma REPEAT 2 Press A B REPEAT at your desired ending point B A B 5 A B e Point B should be in the same title or track as point A Note s e To exit the sequence press A B REPEAT until OFF appears e To cancel point A press CLEAR at step 1 e This function is not available in the other repeat modes Random Playback This function shuffles the playing order of tracks instead of playing the tracks back in sequence 1 Press MODE twice O gt E Press PLAY to start random playback play Note s e To repeat the current track in the random mode press REPEAT repeatedly until C TRACK appears during playback To repeat the entire random selections press REPEAT repeatedly until C ALL appears during playback e During random playback you cannot go back to the previous track Programmed Playback You may determine the order in which tracks will play back Press MODE once O gt E a 2222209 8 Al Soasson o 2 Using A V to select desired track Press OK av y XK e Up to 99 tracks can be programmed e If eight or more tracks were in a program use Hi Previous or P Next to see all the tracks e 2668998 8 El Soararn S pasea les 3
50. ll illuminate A Playback picture is partially noisy e Adjust tracking control for a better picture by pressing TRACKING y A Cannot view a picture but the e Head cleaning may be necessary Refer to page 5 audio is OK e Make sure the VCR is not in the VCR Menu mode None or poor playback picture e Adjust tracking control for a better picture by pressing TRACKING y A e Connect the video cable firmly Video or color fades in and out when You cannot copy a copyrighted cassette tape making a copy of a cassette tape e Check if this Unit is in the VCR mode If not press VCR on the Remote Control to switch the mode No picture e Connect the video cable firmly e Insert a correct video disc that can be played back on this Unit e Press DVD on the Remote Control Check if the DVD SOURCE light will illuminate Then try other DVD features e Set PROG SCAN correctly in DISPLAY menu Turn it on only if your TV has progressive scan and you are using the component video connections between the Unit and the TV Disable progressive scan for all other connections Refer to page 10 Disc cannot be played back e Insert the disc e Clean the disc e Place the disc correctly with the label side up e Cancel the parental lock or change the control levels e Handle a disc with special care so that it does not have fingerprints scratches or dusts on its surface No sound e Connect the audio cables firmly e Turn on the power o
51. llow steps 1 to 3 in the CUSTOM Menu section on page 24 6 To exit the menu ANGLE ICON Default ON Set to ON to display es when multiple camera angles are available during DVD playback ANGLE ICON ON OFF OTHERS menu SETUP OTHERS aT il ANGLE ICON ON He 5 be IAAK AA ASS Continued on next page EN Reset to the Default Setting Except for PARENTAL Setting 1 Press SETUP in the 2 Select INITIALIZE 3 Select YES Stop mode gt Ar y Ar y SETUP menu Press SETUP twice 4 To exit the menu Note s e When you do not wish to initialize select NO at step 3 QUICK QUICK CUSTOM CUSTOM INITIALIZE INITIALIZE INFORMATION Troubleshooting If this Unit does not perform properly when operated as instructed in this manual Refer to the following Problem Corrective action No power e Make sure the power plug is connected to an AC outlet e Make sure the power is turned on This Unit does not respond to the Check if the power plug is connected to an AC outlet Remote Control e Check the batteries in the Remote Control e Aim the Remote Control directly at the infrared sensor window If necessary remove all the obstacles between the sensor and the Remote Control e You have to be within 23 feet 7m of this Unit e Check if a cassette tape is in this Unit e Tune your radio to an empty AM station so that you hear a lot of static Turn up the volume then if yo
52. nverter Set top Box gt CE RCA audio video cables Note s e Please purchase the necessary cables at your local store Refer to page 11 5 Set the desired start minutes If you wish to go back to the left press lt d SATELLITE LINK A r y 6 Press gt to set satellite link standby mode TEO gt e TIMER REC indicator on this Unit lights up and the Unit goes to the DVD mode If you do not use DVD function turn off the Unit e Satellite Unit must be turned on for VCR satellite link to start If an External Tuner Cable Satellite or Converter Set top Box is not set to output signals satellite link will remain in standby mode To cancel the satellite link function in standby mode Press TIMER SET on the Remote Control or STOP EJECT W 4 on this Unit To cancel the satellite link function while the satellite link recording is in progress Press STOP EJECT W 4 on this Unit e If you have not set the clock CLOCK SET menu will appear at step 2 Refer to Clock Setting on page 12 e You cannot set the ending time for the satellite link timer recording on this Unit e Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording e When a regular timer recording and the satellite link timer recording are overlapped those recordings are recorded as illustrated below e g In case the satellite link timer recording is over
53. ode TRIPROGRAM or RANDOM will be displayed instead of 2 20 EN Search Functions Search function does not work during programmed or random playback Using Track Search A ES 1 Press SEARCH SEARCH 2 Select track number by using the Number buttons within 30 seconds CG GIG GJ GIG CRIES ED Co 1 e For the disc with less than 10 tracks press the track number directly e For discs with more than 10 but less than 99 tracks to play back single digit track press 0 first then the track number e g for track 3 press 0 3 To play back a double digit track press the track number Using Hd Previous or Bl Next 1 Press M Previous or P Next during playback Current Track O 0 y_ TR Hd Previous P Next Note s e 10 can also bring the track search display except for the disc with less than 10 tracks For such a disc track search can be performed by just pressing the track number e For audio CD track search is not available for programmed and random playback Using Title Chapter Search 1 Press SEARCH once for the chapter search Press SEARCH twice for the title search W SEARCH 2 Select title chapter number by using the Number buttons within 30 seconds Using Hi Previous or Pl Next 1 Press M Previous or P Next during playback Current Chapter CH CH a cH 3 cH 4 Hi
54. omplete these settings refer to pages 24 25 Note s e The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck e By hooking this Unit up to a Dolby Digital decoder you can enjoy high quality Dolby Digital multi channel surround sound as heard in the movie theaters e Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers Connection to an External Tuner Cable Satellite or DTV to analog TV Converter Set top box rear of TV RCA audio cable E m lt lt au i RCA video cable Using the Unit with an External Tuner Cable Satellite or Converter Set top Box 1 Connect RCA audio and video cables to the audio and video output jacks of your External Tuner Cable Satellite or Converter Set top Box and to the audio and video input jacks at the rear of the Unit 2 Press INPUT on your Remote Control until L1 is displayed on your TV Note s e Your Cable Satellite Set top Box can be accessed only by connecting it to L1 rear panel jacks on the Unit L1 Rear panel terminals L2 Front panel terminals Refer to Front amp Rear Terminals on page 13 for more information EN rear of the Unit External Tuner Cable Satellite or Converter Set top Box CE AUDIO OUT e RCA
55. on slow mode Press H PAUSE during playback then press gt gt F FWD PP on this Unit e If you want to change the speed in slow mode press gt gt or lt lt F FWD gt gt or REW lt lt on this Unit slow speed will be faster or slower e If the noise bars appear on the TV screen you can reduce it by using TRACKING A v To rewind the cassette tape automatically auto rewind When a cassette tape reaches its end during playback fast forward or recording except timer recording and one touch timer recording the cassette tape will automatically rewind to the beginning After rewinding finishes the Unit will eject the cassette tape Note s e To prevent damage to the cassette tape still or slow mode will automatically stop after 5 minutes e To return to playback from the picture search still or slow mode press gt PLAY Time Search To search by length of time Zi e Insert a cassette tape into this Unit Press SEARCH twice TIME SEARCH SEARCH 2 Select the desired length of time for fast forwarding or rewinding TIME SEARCH 2 50 Ah o V 0 01 9 59 1 minute 9 hours and 59 minutes 3 To rewind lt To fast forward gt gt PLAY Note for Index Search amp Time Search e These functions are not available during recording e Press W STOP to stop the search e If a cassette tape ends during a search your search will be cancelled and
56. r Y RR sora d o gt TT 1 0 12 01 3 Press OK at the desired marker To exit the marker screen 1 Press BACK 7 BALK Note s e The marker display will disappear in about 30 seconds when there is no output e To clear a marker select the marker to be cleared at step 2 in the section To set a marker or To return to the marker later and then press CLEAR e Opening the disc tray or turning off the power will erase all markers e Selecting AC at step 2 in the section To set a marker or To return to the marker later will also erase all markers Repeat Random Programmed Playback Repeat Playback gt Joga O Repeat function is available only during playback S CHAPTER e g DVD Press REPEAT during playback gt REPEAT Each time you press REPEAT repeat function changes as example below E em repeat off CHAPTER current chapter repeat TITLE current title repeat repeat off current track repeat G y G CG OFF Ld y Y TRACK e Repeat setting except ALL will be cleared when moving to another gt r r entire disc repeat title chapter or track e This function is not available with some discs or during repeat A B playback Repeat A B Playback gt gt O BND O SS Repeat function is availab
57. red point position guide EN On Screen Display You can check the information about the current disc by pressing DISPLAY on the Remote Control CHB Eo DISPLAY appears only in a case multi angle is available on the DVD current playback status CH 11 16 0 00 00 0 03 30 o gt remaining time of the current chapter elapsed time of the current chapter CH Chapter current chapter number total chapters DISPLAY remaining time of the current title elapsed time of the current title TT Title current title number total titles DISPLAY layer numbers appears only when playing a two layered disc SI ILO Layer 0 is playing L1 Layer 1 is playing current repeat setting appears only when the repeat setting is active G C Chapter repeat G T Title repeat AG B A B repeat bit rate the amount of audio and video data currently being read DISPLAY current playback status TR 4 12 0 03 21 0 02 15 GT El remaining time of the current track elapsed time of the current track Sila TR Track Y DISRLAY current track number total tracks ALL current track number total tracks current repeat setting if active GT Track repeat G A All Tracks repeat AG B A B repeat remaining time of the entire disc elapsed time of the entire disc DISPLAY E 1 Note s e When you are playing a disc in program or random m
58. rly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made RADIO TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate r
59. s W STOP to 6 Press OPEN CLOSE 4 to eject stop recording the recorded cassette tape OPEN CLOSE Accidental Erasure Prevention ey To prevent accidental recording remove erasure A EAD You CANNOT dub a DVD to a video cassette tape prevention tab on the cassette tape To record on it later cover the hole with adhesive tape erasure prevention tab Timer Recording e Insert a recordable cassette tape Za Gala e Make sure to turn on the External Tuner Cable Satellite or Converter Set top Box 1 Select an empty program number SAMA ZMENU TIMER PROGRAMMING Then press P gt to go to next step ae TIME __ END TIME gt TIMER PROGRAMMING PROG 12345678 SATELLITE LINK DATE L1 L2 AUTO REPEAT OFF or gt REC SPEED CLOCK SET START TIME A vy gt LANGUAGE SELECT END TIME L1 L2 REC SPEED Available program number flashes Continued on next page Tb EN 3 Select ONCE DAILY Mon Fri or WEEKLY PROGRAM NUMBER 1 9 Select recording speed ONE TIMEPROGRAM Then press gt to go to next step gt ONCE Then press CLEAR o E START TIME 07 30 PM WEEKLY END TIME 08 30 PM L1 L2 L Ao y y REC SPEED SP a v gt El 4 Select the desired date e To set another program after step 9 press P gt Then press gt to go to next step Then continue with step 2 ONE TIME PROGRAM 10 Press TIMER SET to set the timer standby mo
60. slot fully insert ATTENTION Pour eviter les chocs lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond O The symbol for CLASS II Double Insulation The important note and rating are located on the rear or bottom of the cabinet For Customer Use Please write the model and serial number of your unit located on the cabinet in the space below for future reference Model No Serial No PHILIPS Visit our World Wide Web Site at http www philips com support EN IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Se es a oS a Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particula
61. subtitle to OFF Note s e If your Language is not shown after pressing SUBTITLE several times the disc may not have that Language However some discs have the subtitle Language setting on the disc menu Operation varies depending on the discs so refer to the manual along with the disc e When NOT AVAILABLE appears on the TV screen it means no subtitle is recorded on the scene e If you choose a Language that has a 3 letter language code the code will be displayed every time you change the subtitle language setting If you choose any other Languages will be displayed instead Refer to page 28 e Some discs will only allow you to change the subtitle from the disc menu Refer to the manual accompanying the discs for details Audio Language This Unit allows you to select an audio Language if multiple Languages are available during DVD playback Press AUDIO to change audio Language gt Each time you press AUDIO the audio Language changes as example below SY 1 ENG Dolby D 3 2 1ch 48k 3 5 ENG English audio gt SPA Spanish audio FRE French audio Note s e If your Language is not shown after pressing AUDIO several times the disc may not have that Language However some discs allow audio Language setting on the disc menu Operation varies depending on the disc so refer to the manual along with the disc e When NOT AVAILAB
62. t from the AC outlet 2 Make the connection as illustrated below 3 Set your RF modulator s channel 3 4 switch to either 3 or 4 whichever the TV channel is least used in your area If your RF modulator has a modulator antenna switch set it according to the manual supplied with the RF modulator 4 Plug in the power cords of the Unit to the AC outlet 5 Turn on your TV and choose the same channel as you set the RF modulator s channel 3 4 switch to For more details follow the manual supplied with the RF modulator DVD VCR AUDIO OUT rear of this Unit rear of TV VIDEO OUT rear of your RF modulator VHF one antenna cable TV company No Antenna RF Output If your TV only has an Antenna input no A V inputs you will need an RF modulator NOT INCLUDED to connect this Unit to your TV RF modulator Note s e RF modulator is not supplied with this Unit You need to purchase this separately e The picture quality may suffer if this Unit is connected through an RF modulator to an RF only TV EN About Cassette Tapes and Discs Playable Media Type of Recorded De tape width 1 2 inches 12 65 mm cassette tape SP 1 5 16 inch sec 33 40 mm sec SLP 7 16 inch sec 11 12 mm sec DVD VIDEO 1 2 3 5 9 5 inches e g
63. the battery compartment e If you turn off this Unit OPEN CLOSE 4 on the Unit or Remote Control is not available e To put the VCR into standby mode for a timer recording e To select the VCR output mode e To activate VCR mode Do not mix old and new batteries e Always remove batteries from Remote E e To adjust the tracking manually Control if they are dead or if the Remote ie during playback Control is not to be used for an extended VCR FUNCTIONS Playback Before Turn on the TV Note s OPEN CLOSE input zoom ranen a A B ance seanca seven reenn e When a cassette tape ar 1 Insert a cassette tape into this Unit 2 To start playback 3 To stop playback 4 To eject the cassette tape OPEN CLOSE Other Operations without a record tab is inserted the Unit will start playback automatically e Tracking in playback will be automatically adjusted To adjust the tracking manually press TRACKING A v during playback REC TIMERREC 413 12 When You Playback a Cassette Tape Recorded in Hi Fi Stereo Press AUDIO on the Remote Control then select HIFI or MONO e When playing back non Hi Fi tapes AUDIO on the Remote Control is not available Your selection mi Type of recorded tape L channel R channel_ Hi Fi tapes recorded in L L R Hi Fi stereo To cue or review the picture
64. tracks Remote Control ti ding OTR between the Remote Control and the 2o ng e To play back a chapter or title To play back a track or disc e To select the repeat mode on repeatedly repeatedly off The maximum operable infrared signal BACK e To return to the previous e To return to the previous ranges from the Remote Control are as O operation in menu operation in menu follows To search track i i i e To call up the index or time Line of sight approx 23 feet 7m ati Either side of center approx 16 feet 5m within 30 o Above approx 16 feet 5m within 15 e To call up the DVD setup menu To call up the DVD setup menu To call up the VCR menu Below approx 10 feet 3m within 30 e To turn the Unit on or to turn the To turn the Unit on or to turn the To turn the Unit on or to turn the Unit into the standby mode To Unit into the standby mode To Unit into the standby mode To e turn off the Unit you EA turn off the Unit you completely turn off the Unit you power cord g power cord must unplug the AC power cord e To stop playback e To stop playback or recording e To pause disc playback e To advance playback one frame To pause disc playback at a time infrared sensor window on the Unit Note s e Do not mix alkaline and manganese batteries period of time This will prevent battery acid from leaking into
65. trols or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Continued on next page IMPORTANT COPYRIGHT INFORMATION Unauthorized copying broadcasting public performance and lending of discs are prohibited This item incorporates copy protection technology that is protected by U S patents and other intellectual property rights of Rovi Corporation Reverse engineering and disassembly are prohibited Never use a gas duster on this Unit The gas trapped inside of this Unit may cause ignition and explosion Do not place the Unit on the furniture that is capable of being tilted by a child and an adult leaning pulling standing or climbing on it A falling Unit can cause serious injury or even death This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 7 8 inches 20cm or more around this apparatus To Avoid the Hazards of Electrical Shock and Fire e Do not handle the power cord with wet hands e Do not pull on the power cord when disconnecting it from an AC outlet Grasp it by the plug e Do not put your fingers or objects into the Unit Location and Handling e Do not install the Unit in direct sunlight near strong magnetic fields or in a place subject to dust or strong vibration e Avoid a place with drastic temperature changes e Install
66. turn to the timer standby mode 8 Select L1 or L2 ONE TIME PROGRAM PROGRAM NUMBER 1 Then press to go to next step press P tog P D a To cancel a timer recording in progress END TIME 08 30 PM ar O ee Se Press STOP EJECT W 4 on the Unit Notes for Timer Recording amp One touch Timer Recording OTR e If a cassette tape is not in the Unit or does not have the erasure prevention tab TIMER REC indicator on this Unit blinks and timer recording cannot be performed Please insert a recordable cassette tape e When timer recordings are set TIMER REC indicator on this Unit lights up To use the VCR as usual until the time for the recording press TIMER SET so that TIMER REC indicator light turns off After a one touch timer recording or a timer recording has been set this Unit operates as described below e If a cassette tape runs out before a one touch timer recording or a timer recording is finished the Unit ejects the cassette tape Press TIMER SET on the Remote Control or STOP EJECT W 4 on the Unit then press VCR to activate the VCR function again e Once the Unit turns to the timer standby mode no VCR functions are available until TIMER SET is pressed e To cancel the timer standby mode press TIMER SET on the Remote Control or STOP EJECT W 4 on the Unit then press VCR to activate the VCR function again When an one touch timer recording or a timer recording is completed e TIMER REC ind
67. u hear some signal sound from the radio in response to your pressing buttons on the Remote Control the Remote Control is working e Press and hold any button on the Remote Control toward a Digital or Cell Phone Camera The Remote Control is working when a blinking infrared light is on the Display Note some Cell Phone Cameras have an IR filter e Interference signal may be received Change the position and direction of the Unit Cannot record a TV program e This Unit does not have a Tuner to receive TV broadcasting e You must connect this Unit to a TV through a Cable Satellite Set top Box or similar DTV to analog TV converter devices to record TV programs Refer to Recording amp One touch Timer Recording OTR on page 16 and Satellite Link on page 18 YODA GAC Timer recording is not working e Make sure the timer program is set correctly Refer to page 16 e Make sure TIMER REC indicator on this Unit lights up If not press TIMER SET e Make sure the VCR clock is set correctly Refer to page 12 e Make sure the Cable Satellite Set top Box or DTV to Analog TV Converter is turned On and is sending a signal to L1 or L2 input jacks at the time the Timer recording is active Refer to page 16 lt Cannot go into record mode e Make sure the cassette tape has a Record tab If needed cover the hole with adhesive tape O e Activate this Unit in VCR mode Press VCR on the Remote Control so that the VCR SOURCE light wi

Philips DVP3355V

Contents

Download Pdf Manuals

Related Search

Related Contents