Panduit NM1 rack accessory
Contents
1. E Ap B D Method 2 Method 1 For Instructions in Local Languages E mail and Technical Support cs panduit com www panduit com resources install_maintain asp Fax www panduit com 708 444 6993 Page 1 of 12. NETMANAGER Network Cable Managers Part Numbers NM1 NMF1 NM2 NMF2 NM3 NMF3 NM4 NMF4 INSTRUCTIONS CM334 Panduit Corp 2007 NM2 Shown 19 Rack NMF4 Cover Screws Install the managers to the rack with 12 24x1 screws provided Install the Covers to the manager by positioning it flat against the front rear of the manager and pushing to nae f es g J g The hinged cover opens from the top or Note The recommended assembly torque shall be 9 in lb for 12 24 screws the bottom Pull flanges to open and 14 0 1 N m M6 screws push cover to close The NETMANAGER cable manager is recommended for use with Panduit 24 or 48 port patch panels mounted above and below the manager When routing the cables for the patch panels either of the following two methods are recommended to help maintain cable bend radius METHOD 1 For each row of 24 ports place two cables in each slot on the manager Route half the cables through each of the wire retainers on the ends of the manager METHOD 2 If the cables are coming from one side of the rack place 2 cables in each of the slots on the manager NOTE When using front and back NETMANNAGERS to manage cables on the rear of the rack place 6 cables in each of the 4 slots in the rear of the manager for each row of 24 ports PUA
Download Pdf Manuals
Related Search