ViewZ VZ-AM01 flat panel wall mount
Contents
1. INSTALLATION MANUAL Full Motion LED LCD TV Wall Mount CAUTION DO NOT EXCEED RATED LISTED WEIGHT CAPACITY SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR ISSUED MAY 2013 NOTE Read the entire instruction manual before you start installation and assembly AN WARNING e Do not begin the installation until you have read and understood the instructions and warnings contained in this installation sheet If you have any question regarding any of the instructions or warnings please contact your local distributor e This mounting bracket was designed to be installed and utilised ONLY as specified in this manual Improper installation of this product may cause damage or serious injury e This product should only be installed by someone with good mechanical ability who has basic building experience and fully understands this manual e Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components e If mounting to wood wall studs make sure that mounting screws are anchored into the center of the studs The use of a stud finder is highly recommended e Always use an assistant or mechanical lifting equipment to safely lift and position the equipment e Tighten screws firmly but do not over tighten Over tightening can cause damage to the items This greatly reduces their holding power e This product is intended for indoor use only Using this produ2. ct outdoors could lead to product failure and personal injury 1 Component Checklist IMPORTANT Ensure that you have received all parts according to the component checklist prior to installation If any parts are missing or faulty telephone your local distributor for a replacement wall mount x1 A Package M mm mmm M4x14 x4 M5x14 x4 M A M B Package W IODD SM5 9x907 x2 W A J Allen key x1 B D5 washer x4 M C concrete anchor x2 W B b 2 1a Wood Stud Wall Mounting 1b Solid Brick and Concrete Mounting ated l TAZA TI 4mm e 5 32 RN LI Find and mark the exact location of mounting holes Mark the exact location of mounting holes Drill pilot holes Drill pilot holes se Screw the wall mount onto the Screw the wall wall mount onto the wall N WARNING e Make sure that mounting screws are anchored into the center of the studs The use of a stud finder is highly recommended N WARNING e Installers are responsible to provide hardware for other types of mounting situations Installers must verify that the supporting surface will safely support the combined weight of the e Installers must verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components equipment and all attached hardwa
3. re and components 3 444 4 2 Attach the Display to the VESA Plate 544 p lay and match the holes on your display with the holes on the mount Secure your display to Lift the dis By ightening screws the mount N Tishten all screws but do not over tighten 3 Adjustment E Tighten the adjustment screw by using an Allen Key provided to fix the tilting angle Adjust to the desired location or tilt Maintenance e Check that the bracket is secure and safe to use at regular intervals at least every three months e Please contact your dealer if you have any questions Tension is pre set at the factory If too tight or too loose you may adjust the tension by loosening or tightening the head and arm adjustment bolts TA 70 id 6
Download Pdf Manuals
Related Search