SYBA SY-ADA40011
Contents
1. Introduction This Bridge Board is a converter solution for the Parallel Ultra ATA Device It has a standard 40 pin ATA port which can interface to IDE device hard disk CDROM DVD CD RW etc It accepts Serial ATA commands through the SATA interface from the host decodes the commands and converts them to parallel ATA commands to the device Response from the device through the parallel ATA bus are deciphered processed and converted to SATA protocol and send to the host The SATA TO IDE Converter supports the Serial ATA Generation 1 transfer rate of 1 5GB s 150MB s on the Serial ATA side and is compatible with Ultra ATA 133 on the parallel ATA side Features Convert the Parallel ATA devices to SATA port Compliant with Parallel ATA specification Support ATA 100 133 devices ATA ATAPI Ultra DMA of transfer rate 16 7 25 33 48 66 100 and133MB s Application IDE Port to connect with Parallel ATA devices Note1 IDE device must be seton Master Mode Serial ATA Port to connect with Host Note2 Please make sure that your PC is shut down uring your hardware installation This SATA TO Package content DE device is not hot sv 1 x SATA to IDE Adapter 1 x power connection 1x SATAcable 1 x User Manual Note Contents may vary depending on country market Hardware Installation 1 Connect the SATA TO IDE Converter to your IDE device please remind the direction of IDE port 2 Plug the 4 PIN power cable to SATA TO IDE Convert2. er 3 Connect the 4 PIN power cable to your IDE device be 4 Connect a SATA cable to SATA TO IDE Converter and remember to plug the other connector of the cable to your computer
Download Pdf Manuals
Related Search