Definitive Technology ProMonitor 800
Contents
1. Authorized Dealer However this warranty will automatically terminate prior to the expiration of five 5 years for the drivers and cabinets and three 3 years for the electronic components if the original retail purchaser sells or otherwise transfers the Product to any other party The original retail purchaser shall hereinafter be referred to as you Defective Products must be shipped together with proof of date of purchase prepaid insured to the Authorized Dealer from whom you purchased the Product or to the nearest factory service center Product s must be shipped in the original shipping container or its equivalent in any case the risk of loss or damage in transit is to be borne by you If upon examination at the Factory or a Definitive Technology Authorized Dealer it is determined that the unit was defective in materials or workmanship at any time during this Warranty period Definitive Technology or the Definitive Technology Authorized Dealer will at its option repair or replace this Product at no additional charge except as set forth below All replaced parts and Product s become the property of Definitive Technology Product s replaced or repaired under this Warranty will be returned to you within a reasonable time freight collect This Warranty does not include service or parts to repair damage caused by accident mis use abuse negligence inadequate packing or shipping procedures commercial use voltage in excess of the ra2. Definitive Technology The Leader in High Performance Loudspeakers ProMonitor 800 ProMonitor 1000 Loudspeaker System Owner s Manual Congratulations Congratulations on your purchase of the Definitive Technology ProMonitor Loudspeaker System This revolutionary loudspeaker utilizes state of the art components cast basket homopolymer coned bass midrange drivers moving coil ferrofluid cooled pure aluminum dome high frequency radiators uniphase crossover networks etc a non resonant PolyStone cabinet and low diffraction construction in order to achieve the most lifelike sound possible in your listening room for many years to come Your ProMonitor is a unique speaker which may be used by itself as a full range system or as a satellite with a Definitive ProSub to create a three piece system This three piece system can then be combined with the ProCenter as a four piece home theater system and then with two additional ProMonitors to create a complete Dolby Digital AC 3 ready ProCinema home theater system Please Inspect For Shipping Damage Each loudspeaker leaves our plant in perfect condition Any visible or concealed damage most likely occurred in handling after it left our plant and should be reported at once to your Definitive dealer or the shipping company which deliv ered your loudspeaker Connecting Your Loudspeakers It is critical for proper performance that both speakers left and right be connect
3. bove is to use an RCA to RCA low level cable to connect the LFE sub out on your receiver to the low level LFE sub in the lower RCA input on a ProSub Tell your bass management system that you have Large Left and Right Main Speakers Small Center and Surrounds and Yes Subwoofer You will then be able to raise the LFE 1 channel level being fed to the subwoofer by either using the LFE sub remote level adjustment on your decoder if it has one or the LFE 1 channel level control on your Dolby Digital channel balancing procedure This set up has the advantage of allowing you to set the low frequency level on the a ProSub for smooth balance with music while also allowing you to juice up the bass for movies with the controls on your decoder It should also sound somewhat better Variation on the Optional Hook up One variation on the optional hook up is to hook up and adjust the system as described under Optional Hook Up except select Small Left and Right Main Speakers and Yes Subwoofer on the bass management system along with Small Center and Small Rear Surrounds The advantage of this over the Optional Hook Up will be somewhat greater dynamic range i e you can play the system louder However depending on the specific characteristics of the crossovers designed into your bass management system the transition and blending between the satellites and subwoofer may not be quite as smoot
4. e of 93 68 EEC and carries the CE mark accordingly CTAT012909
5. ed in proper phase Note that one terminal on each speaker the is colored red and the other the is colored black Please make certain that you connect the red terminal on each speaker to the red terminal of its channel on your amplifier or receiver and the black terminal to the black terminal Itis essential that both speakers be connected in the same way to the amplifier in phase If you experience a great lack of bass it is likely that one speaker is out of phase with the other Usually if distortion is heard when the speakers are being driven at loud levels it is caused by driving turning up the amplifier too loud and not driving the speakers with more power than they can handle Remember most amplifiers put out their full rated power well before the volume control is turned all the way up Often turning the dial half way up is actually full power If your speakers distort when you play them loud turn down the amplifier or get a bigger one Using the ProMonitor in Conjunction with a ProSub When a pair of ProMonitors is used in conjunction with a ProSub they may be connected either directly to the left and right channels of your amplifier or receiver or to the left and right speaker level outputs on a ProSub when the ProSub is connected via the high level speaker wire inputs to the left and right channel speaker outputs on your receiver Connecting the ProMonitor to a ProSub which includes a built in hi
6. gh pass crossover for the ProMonitors will result in greater dynamic range the system can be played louder without over driving the satellites and is recommended for most installations especially when the system is being used for home theater Because this is the most common set up the following instructions relate to wiring the ProMonitors to a ProSub Wiring 2 ProMonitors and 1 ProSub for Stereo 2 Channel Use 1 First wire the red terminal of the left channel speaker wire output of your receiver or amplifier to the red terminal of the left channel speaker wire high level input of your ProSub 2 Next wire the black terminal of the left channel speaker wire output of your receiver or amplifier to the black terminal of the left channel speaker wire high level input of the ProSub 3 Repeat Steps 1 and 2 for the right channel 4 Wire the red terminal of the left ProMonitor to the left channel red speaker wire high level out on the back of the ProSub 5 Wire the black terminal of the left ProMonitor to the left channel black speaker wire high level out on the back of the ProSub 6 Repeat steps 4 amp 5 for the right ProMonitor 7 Set the low frequency filter control on the back of the ProSub to the setting described in a ProSub Owner s Manual Please note that the exact frequency will depend on many factors including specific positions of the speakers in the room so you might experimen
7. h and continuous as the Optional Hook Up or with the basic hook up detailed above in Steps 1 9 However if you wish to play the system louder you can experiment with this variation In addition this variation is also one which can be used if your decoder bass management system does not allow a Large Left and Right Main Speakers and Yes Subwoofer setting We encourage you to experiment with the various settings on your subwoofer settings on your decoder and hook up options as described until you find the best combination for you Using ProMonitors with a ProSub for Rear Channel Surround Use Since Dolby Digital is capable of delivering a full range bass signal to the rear channels some more elaborate systems will include an additional ProSub for the rear channels In this case simply wire the ProMonitors to the ProSub as described in 1 thru 8 earlier except wire to the rear surround outputs Set the bass management system for Large Rear Speakers Using ProMonitors with Separate Left and Right Channel ProSubs You may also use a separate ProSub for the Front Left and Front Right channels Simply follow all previous instructions except use only the left channel inputs and outputs on the left ProSub and the right channel inputs and outputs on the right ProSub Speaker Break In Your ProMonitors should sound good right out of the box however an extended break in period of 20 40 hours or more of p
8. ill result in more detail and greater clarity Wall Mounting the ProMonitors The ProMonitors can be wall mounted using the optional ProMount 80 which should be available from your Definitive dealer Your ProMonitor also has a built in keyhole wall mount on the back Use toggle bolts or other similar anchored fasten ers to fasten the ProMount 80to the wall or to hold the keyhole mount Do not use an unanchored screw in the wall Please note that if you wall mount the speaker there is an optional plug included which covers the hole in the bottom of the speaker which you will see after you remove the built in stand Technical Assistance It is our pleasure to offer assistance if you have any questions regarding your ProMonitor or its set up Please contact your nearest Definitive Technology dealer or contact us directly at 410 363 7148 Service and warranty work on your Definitive loudspeakers will normally be per formed by your local Definitive Technology dealer If however you wish to return the speaker to us please contact us first describing the problem and requesting authorization as well as the locations of the nearest factory service center Please note that the address given in this booklet is the address of our offices only Under no circumstances should loudspeakers be shipped to our offices or returned without contacting us first and obtaining return authorization Definitive Technology Offices 11433 Cronridge Dr
9. ive Suite K Owings Mills Maryland 21117 phone 410 363 7148 Visit us at www definitivetech com and learn about all our exciting products Specifications ProMonitor 800 Specifications Dimensions 834 Hx 5 Dx 14h W Weight 4 Ibs each Frequency Response 57 Hz 30 kHz Efficiency 89 db Nominal Impedance 4 8 ohms Driver Complement One 4 42 cast basket bass midrange driver coupled to a 4 2 pressure driven planar low frequency radiator One 1 pure aluminum dome tweeter Rec Assoc Ampl 10 150 watts channel ProMonitor 1000 Specifications Dimensions 107 s W x 6 2 W x 61 4 H Weight 7 lbs each Frequency Response 47 Hz 30 kHz Efficiency 90 db Nominal Impedance 4 8 ohms Driver Complement One 5 cast basket bass midrange driver coupled to a 51 4 pressure driven planar low frequency radiator One 1 pure aluminum dome tweeter Rec Assoc Ampl 10 200 watts channel Specifications subject to change Limited Warranty 5 Years for Drivers and Cabinets 3 Years for Electronic Components Definitive Technology warrants to the original retail purchaser only that this Definitive Technology Loudspeaker Product the Product will be free from defects in materials and workmanship for a period of five 5 years covering the drivers and cabinets and three 3 years for the electronic components from the date of the original purchase from a Definitive Technology
10. iver decoder allows you to choose the crossover frequency of or between your subwoofer and satellites choose the highest possible up to 100 Hz for the ProMonitor 1000 and 120 Hz for the ProMonitor 800 Turn the low pass filter control on the ProSub all the way up in a clockwise direction Adjust the relative levels of all five channels and the subwoofer according to the channel balancing procedure outlined in your receiver or decoder manual THIS IS VERY CRITICAL Optional Hook Up One Hook up the left and right front ProMonitors and ProSub as described in Steps 1 thru 9 earlier Wire your center channel to the center channel out on your receiver or center channel amplifier and your left and right rear surround speak ers to the rear channel outputs on your receiver or rear channel amplifier taking care that all speakers are in phase i e red to red and black to black Set the bass management system of your receiver or decoder for Large Left and Right Main Speakers Small Center and Rear Surround Speakers and No Subwoofer All the bass information including the 1 channel LFE signal will be directed to the main left and right channels and into the subwoofer giving you all the benefits of Dolby Digital AC 3 5 1 Optional Hook Up Two An option on this hook up if your decoder will allow you to select Large Left and Right Main Speakers and Yes Subwoofer in addition to the hook up as described a
11. laying is required to reach full performance capability Break in allows the suspensions to work in and results in fuller bass a more open blossoming midrange and smoother high frequency reproduction Positioning the ProMonitor in Your Room It is important that some simple set up recommendations be followed in order to assure optimum performance in your room Please remember that although these recommendations are usually valid all rooms and listening set ups are somewhat unique so do not be afraid to experiment with the speakers Remember whatever sounds best to you is correct The ProMonitor Loudspeakers may be placed on a stand or shelf or mounted on the wall or ceiling Placement close to the wall will increase the bass output while placement further from the rear wall will decrease the bass output When used as fronts the speakers should usually be placed 6 to 8 feet apart and kept away from the side walls and corners A good rule of thumb is to place the speakers separated by one half the length of the wall they are positioned along and each speaker one quarter the length of the wall behind them away from the side wall When used as rear speakers take care never to locate the speakers forward of the listeners Speakers may be angled in towards the listening position or left parallel with the rear wall according to your personal listening taste Normally angling the speakers in so that they point directly at the listeners w
12. might also want to hook this up using an RCA to RCA low level cable to the LFE subwoofer in low level input the lower RCA input on a ProSub Then use your remote control sub level adjustment to fine tune the low frequency level for different types of program material You might find you want a higher level for some music or for movies For Dolby Digital AC 3 5 1 Systems Please note that Dolby Digital decoders have bass management systems systems which direct the bass to the various channels which vary from unit to unit Simplest Hook Up The simplest way to hook up and use your ProCinema System with Dolby Digital 5 1 Systems is to hook a ProMonitor to each of the front main left front main right rear surround left and rear surround right channels and a ProCenter to the front center channel outputs of your receiver or power amplifier making sure that the red terminal of each speaker is hooked up to the red terminal of its proper channel out put and the black terminal is connected to the black terminal of its proper chan nel output Then connect the LFE RCA output on your receiver or decoder to the LFE input on your Definitive ProSub subwoofer Set the bass management settings of your receiver or decoder see your receiv er or decoder manual for Small left front main right front main center front left rear surround and right rear surround to Small and Subwoofer to Yes If your rece
13. t with a slightly higher or lower setting to achieve ideal blending between the sub and the satellites for your particular set up Listen to a wide variety of music to determine the correct setting for this in your system 8 Set the subwoofer level control to the setting described in a ProSub Owner s Manual Please note that the exact level depends on many factors including your room size position of the speakers etc as well as your personal listening taste so you might experiment with the subwoofer level while listening to a wide variety of music until you achieve the ideal setting for your system 9 If your receiver allows you to choose whether or not the main speakers are to receive a full range signal choose full range or Large Left and Right Main Speakers Using ProMonitors with a ProSub in Home Theater There are many different variations of the basic Dolby ProLogic and Dolby Digital AC 3 formats and features as well as a multiplicity of ways in which the speakers can be hooked up to these systems We will discuss the simplest and most effective hookups and adjustments If you have a particular question regarding your set up please call us For Dolby ProLogic Systems Follow Steps 1 9 provided earlier The subwoofer will receive its low frequency signal through the full range speaker level outputs If however your system has a separate subwoofer RCA low level output which has a remote control level adjustment you
14. ted maximum of the unit cosmetic appearance of cabinetry not directly attributable to defects in materials or workmanship or service or repair or modification of the Product which has not been authorized by Definitive Technology Definitive Technology makes no Warranty with respect to its Products purchased from dealers or outlets other than Definitive Technology Authorized Dealers This Warranty is in lieu of all other expressed Warranties If this Product is defective in material or workmanship as warranted above your sole remedy shall be repair or replacement as provided above In no event will Definitive Technology be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product even if Definitive Technology or a Definitive Technology Authorized Dealer has been advised of the possibility of such damages or for any claim by any other party Some states do not allow the exclusion or limitation of consequential damages so the above limitation may not apply to you All implied warranties on the Product are limited to the duration of this expressed Warranty Some states do not allow limitation on how long an implied Warranty lasts so the above limitations may not apply to you This Warranty gives you specific legal rights and you also may have other rights which vary from state to state CE This product complies with the essential requirements of EMC directives 89 336 EEC and 73 23 EEC inclusiv
Download Pdf Manuals
Related Search