Viewsonic PJD2121 data projector
Contents
1. 3 Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic 4 For additional information or the name of the nearest ViewSonic service center contact ViewSonic Limitation of implied warranties There are no warranties express or implied which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose Exclusion of damages ViewSonic s liability is limited to the cost of repair or replacement of the product ViewSonic shall not be liable for 1 Damage to other property caused by any defects in the product damages based upon inconvenience loss of use of the product loss of time loss of profits loss of business opportunity loss of goodwill interference with business relationships or other commercial loss even if advised of the possibility of such damages 2 Any other damages whether incidental consequential or otherwise 3 Any claim against the customer by any other party Effect of state law This warranty gives you specific legal rights and you may also have other rights which vary from state to state Some states do not allow limitations on implied warranties and or do not allow the exclusion of incidental or consequential damages so the above limitations and exclusions may not apply to you Sales outside the U S A and Canada For warranty information and service on ViewSonic pr2. North and South America Three 3 years warranty for all parts excluding the lamp three 3 years for labor and one 1 year for the original lamp from the date of the first consumer purchase Europe except Poland Three 3 years warranty for all parts excluding the lamp three 3 years for labor and ninety 90 days for the original lamp from the date of the first consumer purchase Poland Two 2 years warranty for all parts excluding the lamp two 2 years for labor and ninety 90 days for the original lamp from the date of the first consumer purchase Limited One 1 year Heavy Usage Warranty Under heavy usage settings where a projector s use includes more than four 4 hours average daily usage North and South America One 1 year warranty for all parts excluding the lamp one 1 year for labor and ninety 90 days for the original lamp from the date of the first consumer purchase Europe One 1 year warranty for all parts excluding the lamp one 1 year for labor and ninety 90 days for the original lamp from the date of the first consumer purchase Other regions or countries Please check with your local dealer or local ViewSonic office for the warranty information Lamp warranty subject to terms and conditions verification and approval Applies to manufacturer s installed lamp only All accessory lamps purchased separately are warranted for 90 days Who the warranty protects This warranty is valid only for the firs
3. no signal detected limited menu items are accessible Main menu 1 DISPLAY 2 PICTURE 3 Resync VGA Input only 4 Language 5 Advance 6 About Sub menu Options ViewSonic PJD2121 Description of each menu Default Blank Screen ews you to select which logo screen will display during projector start up Vertical Keystone function by using DDP2230 of TP one El ica ES one Hnc ion by using 30 430 chip to provide vertical keystone correction Aspect Ratio allows the user to set the aspect ratio of the image displayed on the projector This is helpful when the input resolution is not at the native resolution of the conn or if the user wishes to fill the projector N A N A Fill 1 Fill 2 Native 3 4 3 4 16 9 l Magnify To zoom in the details one the projected screen User can choose different mode Such as User VGA Video and ViewMatch N A N A Component Video Aspect Ratio PC VGA Mode When Picture mode is selected on User mode this function can be active Adjusts the brightness of the image The higher the setting the brighter the image And the lower the setting the darker the image Brightness 100 100 When Picture mode is selected on User mode this function can be active Adjusts the degree of difference between the dark and 50 light in the image The higher the value the greater the contrast Contrast When
4. of this document may be copied reproduced or transmitted by any means for any purpose without prior written permission from ViewSonic Corporation Product Registration To meet your future needs and to receive any additional product information as it becomes available please register your product on the Internet at www viewsonic com The ViewSonic Wizard CD ROM also provides an opportunity for you to print the registration form which you may mail or fax to ViewSonic For Your Records Product Name PJD2121 ViewSonic SVGA DLP Projector Model Number VS12617 Document Number PJD2121 UG ENG Rev 1A 06 12 09 Serial Number Purchase Date The lamp in this product contains mercury Please dispose of in accordance with local state or federal laws ViewSonic PJD2121 Table of contents Projector features Description of each menu Shipping contents Maintenance 18 Projector exterior view Care of the projector Controls and functions Lamp information Positioning your projector 7 Indicators Choosing a location Troubleshooting Projection dimensions Specifications 22 Connection Projector specifications Connecting a computer or monitor Dimensions Connecting Video source devices Timing chart Operation scans 1O A DDOHGEX i nasie exse epist ere aera 25 Starting up the projector IR control table Using the menus Switching input signal Adjusting the projected image Adjus
5. on the projector The final connection path should be like that shown in the following diagram CT Many notebooks do not turn on their external video ports when connected to a projector Refer to your notebook s documentation to switch between monitor and projector ViewSonic PJD2121 Connecting a Component Video source device The projector provides one Component input socket that allows you to connect Component Video output from DVD player or other equipment e Make sure you have Component cable this cable is not a standard part in shipping content The final connection path should be like that shown in the following diagram ViewSonic PJD2121 Operation Starting up the projector 1 Plug the power cord into the projector and into a wall socket and power adaptor Plug DC jack to projector Check that the POWER indicator light on the projector flashes blue after power has been applied 2 Remove the lens cap If it is closed it could become deformed due to the heat produced by the projection lamp 3 Press POWER on the projector or remote control to start the projector The POWER indicator light stays blue when the projector is on The start up procedure takes about 20 seconds In the later stage of start up a startup logo is projected If necessary Rotate the focus ring to adjust the image clearness If the frequency resolution of the input signal exceeds the projector s operating range you will see th
6. required to provide a the original dated sales slip b your name c your address d a description of the problem and e the serial number of the product 2 Take or ship the product in the original container packaging to an authorized ViewSonic service center 3 Round trip transportation costs for in warranty products will be paid by ViewSonic Limitation of implied warranties There are no warranties express or implied which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose Exclusion of damages ViewSonic s liability 1s limited to the cost of repair or replacement of the product ViewSonic shall not be liable for 1 Damage to other property caused by any defects in the product damages based upon inconvenience loss of use of the product loss of time loss of profits loss of business opportunity loss of goodwill interference with business relationships or other commercial loss even if advised of the possibility of such damages 2 Any other damages whether incidental consequential or otherwise 3 Any claim against the customer by any other party 4 Repair or attempted repair by anyone not authorized by ViewSonic ViewSonic PJD2121 Contact Information for Sales amp Authorized Service Centro Autorizado de Servicio within Mexico Name address of manufacturer and importers M xico Av de la Palma 8 Piso 2 Despacho 203 Corporat
7. 97000 Merida Yucatan Tel 01 999 925 19 16 Other places please refer to http www viewsonic com la soporte index htm Mexico Latin America Peru www viewsonic com la T 0800 53458 soporte viewsonic com Macau www hk viewsonic com T 853 700 303 service hk viewsonic com T 1 800 688 6688 English E service us viewsonic com Puerto Rico amp Virgin Islands www viewsonic com T 1 866 379 1304 Spanish soporte viewsonic com F 1 909 468 1202 Singapore Malaysia Thailand www ap viewsonic com T 65 6461 6044 service sg viewsonic com South Africa www viewsoniceurope com www viewsoniceurope com uk Support Calldesk htm United Kingdom www viewsoniceurope com uk www viewsoniceurope com uk Support Calldesk htm T Toll Free 1 800 688 6688 United States www viewsonic com T Toll 1 424 233 2530 service us viewsonic com F 1 909 468 1202 ViewSonic PJD2121 Limited Warranty VIEWSONIC PROJECTOR What the warranty covers ViewSonic warrants its products to be free from defects 1n material and workmanship under normal use during the warranty period If a product proves to be defective in material or workmanship during the warranty period ViewSonic will at its sole option repair or replace the product with a like product Replacement product or parts may include remanufactured or refurbished parts or components Limited Three 3 year General Warranty Subject to the more limited one 1 year warranty set out below
8. Picture mode is selected on User mode this function can be active Adjusts the image to make it look sharper At higher values will switch to Detail Enhancement User can set different Color Space such as Auto RGB l N A color Space ycbCr and YPbPr Noise Reduce signal noise But depends on the input signal Reduction Lamp Reset To reset the lamp hours after replaced the lamp Factory Reset Return to the factory pre set value Refer to Page 16 Fine tuning the image quality in user HSG E modes Sharpness N A Automatic FF NA Z z o Shows the input source 1 VGA 2 Component Resolution Shows the current input resolution Lamp Hours Shows the current lamp using hours Z gt Z gt Z Z Z gt gt gt Z Z Z Z z z O Active Source Z Z gt gt Z gt The following setup value will be changed after calibration Phase Adjusts the clock phase to reduce image distortion Tracking Adjusts the image size to fit the screen Position Vertical Adjusts the Vertical width of the image Position 17 ViewSonic PJD2121 Maintenance Care of the projector Your projector needs little maintenance The only thing you need to do on a regular basis is to keep the lens clean Never remove any parts of the projector except the lamp Contact your dealer if other parts need replacing Cleaning the lens Clean the lens whenever you notice dirt or dust on the surface Use a ca
9. RGB PC signal input socket 7 Component video YPbPr YCbCr signal input socket 8 Power DC inlet 9 Kensington anti theft lock slot 10 Rear IR remote sensor 11 Lamp cover PJD2121 Controls and functions Projector and remote control ViewSonic 1 Focus ring Adjusts the focus of the projected image See Fine tuning the image size and clarity on page 15 for details 2 Keystone Manually corrects distorted images resulting from an angled projection 3 Keystone Manually corrects distorted images resulting from an angled projection 4 SOURCE Displays the source selection bar See Switching input signal on page 15 for details 5 Power button To turn on off power 6 Temperature Power indicator light Lights up red if the projector s temperature becomes too high See Indicators on page 22 for details 1 POWER To turn on off power 2 Arrow keys Left Right Up Down Selects the desired menu items and makes adjustments 3 Enter Selects an available OSD function setup mode 4 MENU EXIT Turns on the On Screen Display OSD menu Goes back to previous OSD menu exits and saves menu settings See Using the menus on page 14 for details 5 Source Displays the source selection bar See Switching input signal on page 15 for details 6 ViewMatch Switch in between high brightness performance or Accuracy color performance 7 BLANK Hides the screen picture See Hidin
10. ViewSonic PJ D21 21 User Guide SVGA DLP Projector Guide de utilisateur Bedienungsanleitung Gu a del usuario PYKOBOACTBO NOonb30BaTeNnA 2 Ait B E HFA 811 IMPORTANT Please read this User Guide to obtain important information on installing and using your product in a safe manner as well as registering your product for future service Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation which is also found on our web site at http www viewsonic com in English or in specific languages using the Regional selection box in the upper right corner of our website Antes de operar su equipo lea cuidadosamente las instrucciones en este manual P JT ViewSonic Model No VS12617 Compliance Information FCC Statement This device complies with part 15 of FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in a
11. W to select a sub menu item to be changed and adjust the value with P gt This function is only available when User mode is selected up in the Picture Mode sub menu item Fine tuning the image quality in user modes Adjusting color 1 Go to the ADVANCE gt HSG menu 2 Press P to select color you want to adjust There are 7 color can be adjusted 3 PressY to select a sub menu item to be changed and adjust the value with P Please be noticed this is one of the colors Hiding the image In order to draw the audience s full attention to the presenter you can use BLANK on the remote control to hide the screen Press again to restore 14 ViewSonic PJD2121 Shutting down the projector Press POWER and a confirmation message displays prompting you If you don t respond in a few seconds the message will disappear Press POWER a second time The POWER indicator light flashes RED the projection lamp shuts down and the fans will continue to run for approximately 60 seconds to cool down the projector Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time 15 ViewSonic PJD2121 Menu operation Menu system Please note that the on screen display OSD menus vary according to the signal type selected The menu items are available when the projector detects at least one valid signal If there is no equipment connected to the projector or
12. by the manufacturer or sold with the unit When a cart is used use caution when moving the cart unit combination to amp avoid injury from tipping over 13 Unplug this unit when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the unit has been damaged in any way such as if the power supply cord or plug is damaged if liquid 1s spilled onto or objects fall into the unit if the unit is exposed to rain or moisture or if the unit does not operate normally or has been dropped ViewSonic PJD2121 Declaration of ROHS Compliance This product has been designed and manufactured in compliance with Directive 2002 95 EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment RoHS Directive and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee TAC as shown below Proposed Maximum Substance Actual Concentration Concentration Mercury Hg 0 1 lt 0 1 ry Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below Examples of exempted components are 1 Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive 2 Lead in glass of cathode ray tubes electronic components fluor
13. ccordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user 1s encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Warning You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment For Canada This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada Following information is only for EU member states The mark 1s in compliance with the Waste Electrical and Electronic Equipment Directive 2002 96 EC WEEE The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste but use the return and collection systems E available symbol Hg Cd or Pb then it means that the batte
14. duct on which the serial number has been defaced modified or removed 2 Damage deterioration or malfunction resulting from a Accident misuse neglect fire water lightning or other acts of nature unauthorized product modification unauthorized attempted repair or failure to follow instructions supplied with the product b Any damage of the product due to shipment c Causes external to the product such as electrical power fluctuations or failure d Use of supplies or parts not meeting ViewSonic s specifications e Normal wear and tear f Any other cause which does not relate to a product defect 3 Any product exhibiting a condition commonly known as image burn in which results when a static image 1s displayed on the product for an extended period of time 4 Removal installation insurance and set up service charges How to get service For information about receiving service under warranty contact ViewSonic Customer Support Please refer to the attached Customer Support page You will need to provide your product s serial number so please record the product information in the space provided below on your purchase for your future use Please retain your receipt of proof of purchase to support your warranty claim For Your Records Product Name Model Number Document Number Serial Number Purchase Date Extended Warranty Purchase Y N If so what date does warranty expire 1 To obtain warranty service you will be
15. e message Signal out of range please set the computer output to 800X600 Use the Menu The projector is equipped with On Screen Display OSD menus for making various adjustments and settings Below 1s the overview of the OSD menu Important Use gt to highlight function and press Enter to select Main menu icon 10 ViewSonic PJD2121 To use the OSD menus please set them to your familiar language first 1 Press MENU on the remote control to turn on the OSD 3 Press V to select the language you need and press Press Enter to select Enter 4 Press MENU on the remote control to leave and save the settings Switching input signal The projector can be connected to multiple devices at the same time However it can only display one full screen at a time Be sure the Auto Source Select function in the Advance menu is On which is the default of this projector if you want the projector to automatically search for the signals You can also manually cycle through the available input signals Press SOURCE on the projector or remote control Adjusting the projected image Adjusting the projection angle The projector is equipped with 1 adjuster foot This adjuster changes the image height and projection angle To adjust the projector Screw the front adjuster foot to adjust the height 11 ViewSonic PJD2121 If the projector is not placed on a flat surface or the screen and the projector are not perpendic
16. eplacing the lamp When the lamp s total working time accumulates to over 2000 hours the On Screen Display OSD will deliver a message recommending that you replace the lamp Please contact a service center to replace the lamp as soon as possible The following lamp warning displays will remind you to change the lamp The lamp has been in operation for 2000 hours Install a new lamp for optimal performance You may continue to operate the projector Replacing the lamp Type number RLC 052 To reduce the risk of injuries to fingers and damage to internal components use caution when removing lamp glass that has shattered into sharp pieces Before replacing the lamp clean the lamp compartment and dispose of cleaning materials Be careful of sharp edges in the lamp compartment Wash hands after lamp replacement Only ViewSonic certified lamps are tested with this projector Use of other lamps may cause electrical shock and fire Turn the power off and disconnect the projector from the wall socket before replace the lamp Follow with below instruction Contact your dealer for details Resetting the lamp timer l Press MENU to open the On Screen Display OSD menu La Go to the Advance menu and press Enter 3 Press to select Lamp Reset and press Enter 19 ViewSonic PJD2121 Indicators Light Flashing blue 1 sec interval Stand by mode Flashing blue 10 sec interval This projector will go into hot ignite by 4 ti
17. escent tubes and electronic ceramic parts e g piezoelectronic devices 3 Lead in high temperature type solders 1 e lead based alloys containing 85 by weight or more lead 4 Lead as an allotting element in steel containing up to 0 35 lead by weight aluminium containing up to 0 4 lead by weight and as a cooper alloy containing up to 4 lead by weight ViewSonic PJD2121 Copyright Information Copyright ViewSonic Corporation 2009 All rights reserved Macintosh and Power Macintosh are registered trademarks of Apple Inc Microsoft Windows Windows NT and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries ViewSonic the three birds logo OnView ViewMatch and ViewMeter are registered trademarks of ViewSonic Corporation VESA is a registered trademark of the Video Electronics Standards Association DPMS and DDC are trademarks of VESA PS 2 VGA and XGA are registered trademarks of International Business Machines Corporation Disclaimer ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein nor for incidental or consequential damages resulting from furnishing this material or the performance or use of this product In the interest of continuing product improvement ViewSonic Corporation reserves the right to change product specifications without notice Information in this document may change without notice No part
18. g the image on page 18 for details PJD2121 Remote control effective range Infra Red IR remote control sensor is located on the Back of the projector The remote control must be held at an angle within 30 degrees perpendicular to the projector s IR remote control sensor to function correctly The distance between the remote control and the sensor should not exceed 8 meters 26 feet Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra red Replacing the Battery Pull out the battery Please follow the illustrated instructions Push and hold the locking arm while pulling out the battery holder 2 Insert the new battery in the holder Note the positive polarity should face outward ViewSonic PJD2121 Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select Take into consideration the size and position of your screen the location of a suitable power outlet as well as the location and distance between the projector and the rest of your equipment Your projector is designed to be installed in the following installation locations 1 Front Table Select this location with the projector placed near the floor in front of the screen This is the most common way to position the projector for quick setup and portabili
19. ivo Interpalmas Col San Fernando Huixquilucan Estado de M xico Tel 55 3605 1099 http www viewsonic com la soporte index htm NUMERO GRATIS DE ASISTENCIA TECNICA PARA TODO MEXICO 001 866 823 2004 Hermosillo Distribuciones y Servicios Computacionales SA de CV Calle Juarez 284 local 2 Col Bugambilias C P 83140 Tel 01 66 22 14 9005 E Mail disc2 hmo megared net mx Puebla Pue Matriz RENTA Y DATOS S A DE C V Domicilio 29 SUR 721 COL LA PAZ 72160 PUEBLA PUE Tel 01 52 222 891 55 77 CON 10 LINEAS E Mail datos puebla megared net mx Chihuahua Soluciones Globales en Computaci n C Magisterio 3321 Col Magisterial Chihuahua Chih Tel 4136954 E Mail Cefeo soluglobales com Distrito Federal QPLUS S A de C V Av Coyoac n 931 Col Del Valle 03100 M xico D F Tel 01 52 55 50 00 27 35 E Mail gacosta qplus com mx Guerrero Acapulco GS Computaci n Grupo Sesicomp Progreso 6 A Colo Centro 39300 Acapulco Guerrero Tel 744 48 32627 Av Reforma No 403Gx39 y 41 M rida Yucat n M xico CP97000 Tel 52 999 925 1916 E Mail rrrb sureste com Av Ferrocarril Sonora 3780 L C Col 20 de Noviembre Tijuana Mexico 4 3 ViewSonic Mexico Limited Warranty ViewSonic Villahermosa Compumantenimietnos Garantizados S A de C V AV GREGORIO MENDEZ 71504 COL FLORIDA C P 86040 Tel 01 993 3 52 00 47 3522074 3 52 20 09 E Mail compumantenimientos prodigy ne
20. mes Purple The projector needs 60 seconds to cool down Or Flashing red 1 sec interval Please contact your dealer for assistance 20 ViewSonic PJD2121 Troubleshooting gt The projector does not turn on There is no power from the power Plug the power cord into the AC inlet on the projector and plug the power cord into the power outlet cord Attempting to turn the projector on Wait until the cooling down process has completed again during the cooling process gt No picture The video source is not turned on or Turn the video source on and check that the signal connected correctly cable is connected correctly The projector is not correctly Check the connection connected to the input signal device The input signal has not been Select the correct input signal with the SOURCE key correctly selected on the projector or remote control The lens cover is still closed Open the lens cover gt Blurred image The projection lens is not correctly Adjust the focus of the lens using the focus ring focused The projector and the screen are not Adjust the projection angle and direction as well as aligned properly the height of the projector if necessary The lens cover is still closed Open the lens cover gt Remote control does not work Cause Remedy The battery is out of power Replace the battery with a new one There is an obstacle between the Remove the obstacle remote contr
21. nister of compressed air to remove dust If there is dirt or smears use lens cleaning paper or moisten a soft cloth with lens cleaner and gently wipe the lens surface Cleaning the projector case Before you clean the case turn the projector off using the proper shutdown procedure as described in Shutting down the projector on page 8 and unplug the power cord To remove dirt or dust wipe the case with a soft lint free cloth To remove stubborn dirt or stains moisten a soft cloth with water and a neutral pH detergent Then wipe the case Storing the projector If you need to store the projector for an extended time please follow the instructions below Make sure the temperature and humidity of the storage area are within the recommended range for the projector Please refer to Specifications on page 25 or consult your dealer about the range Retract the adjuster feet Remove the battery from the remote control Pack the projector in its original packing or equivalent Transporting the projector It is recommended that you ship the projector with its original packing or equivalent Lamp information Getting to know the lamp hour When the projector is in operation the duration in hours of lamp usage is automatically calculated by the built in timer To obtain the lamp hour information Press MENU and then press until the About menu is highlighted You will see the lamp hours 18 ViewSonic PJD2121 Timing of r
22. oducts sold outside of the U S A and Canada contact ViewSonic or your local ViewSonic dealer The warranty period for this product in mainland China Hong Kong Macao and Taiwan Excluded is subject to the terms and conditions of the Maintenance Guarantee Card For users in Europe and Russia full details of warranty provided can be found in www viewsoniceurope com under Support Warranty Information 4 3 Projector Warranty PRJ LWO1 Rev 1h 06 25 07 ViewSonic PJD2121 Mexico Limited Warranty VIEWSONIC PROJECTOR What the warranty covers ViewSonic warrants its products to be free from defects in material and workmanship under normal use during the warranty period If a product proves to be defective in material or workmanship during the warranty period ViewSonic will at its sole option repair or replace the product with a like product Replacement product or parts may include remanufactured or refurbished parts or components amp accessories How long the warranty is effective 3 years for all parts excluding the lamp 3 years for labor 1 year for the original lamp from the date of the first consumer purchase Lamp warranty subject to terms and conditions verification and approval Applies to manufacturer s installed lamp only All accessory lamps purchased separately are warranted for 90 days Who the warranty protects This warranty is valid only for the first consumer purchaser What the warranty does not cover 1 Any pro
23. ol and the projector You are too far away from the Stand within 6 meters of the projector projector 21 ViewSonic PJD2121 Specifications Projector specifications Call specifications are subject to be changed without notice General Product name Digital Projector Model name PJD2121 Optical Resolution 800 x 600 SVGA Display system 1 CHIP DMD Lens F Number F 2 6 Lamp 50W lamp Electrical Power supply AC Adaptor 100 240V Input 19V 4 74A Power consumption 90 W Max Mechanical Dimensions 205 mm W x 65 mm H x 121 mm D Weight 2 2 lbs 1 0 Kg Input terminal Computer input RGB input D Sub 15 pin female x 1 Video signal input VIDEO RCA jack x 1 Environmental Requirements Operating temperature 0 C 40 C at sea level Operating relative humidity 10 90 without condensation Operating altitude e 0 1499 m at 0 C 35 C 1500 3000 m at 0 C 30 C ViewSonic 22 PJD2121 Dimensions 205 mm W x 65 mm H x 121 mm D Timing chart wm x Ewa s x 23 ViewSonic PJD2121 es 8 e ewe 8 9 UXGA 1600x1200 muc o9 o0 ew o p e 1152x870 68 68 20x80 CN T Others 1440x900 60 55 9 moo aa PC Full scan Compatible Supportive Modes Note the Projector may need minor adjustment in the OSD
24. ry has a heavy metal content of more than 0 0005 If the batteries accumulators and button cells included with this equipment display the chemical Y Mercury or more than 0 002 Cadmium or more than 0 004 Lead ViewSonic PJD2121 Important Safety Instructions 1 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this unit near water Clean with a soft dry cloth Do not block any ventilation openings Install the unit in accordance with the manufacturer s instructions P ep xe SE e m e Do not install near any heat sources such as radiators heat registers stoves or other devices including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade and the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs Convenience receptacles and the point where they exit from the unit Be sure that the power outlet 1s located near the unit so that it 1s easily accessible 11 Only use attachments accessories specified by the manufacturer I Use only with the cart stand tripod bracket or table specified
25. t consumer purchaser What the warranty does not cover 1 Any product on which the serial number has been defaced modified or removed 2 Damage deterioration failure or malfunction resulting from a Accident abuse misuse neglect fire water lightning or other acts of nature improper maintenance unauthorized product modification or failure to follow instructions supplied with the product Operation outside of product specifications Operation of the product for other than the normal intended use or not under normal conditions Repair or attempted repair by anyone not authorized by ViewSonic Any damage of the product due to shipment Removal or installation of the product Causes external to the product such as electric power fluctuations or failure 709 moan Gc Use of supplies or parts not meeting ViewSonic s specifications Normal wear and tear jm o j Any other cause which does not relate to a product defect 3 Removal installation and set up service charges ViewSonic PJD2121 How to get service 1 For information about receiving service under warranty contact ViewSonic Customer Support please refer to Customer Support page You will need to provide your product s serial number 2 To obtain warranted service you will be required to provide a the original dated sales slip b your name c your address d a description of the problem and e the serial number of the product
26. t mx Veracruz Ver CONEXION Y DESARROLLO S A DE C V Av Americas 419 ENTRE PINZ N Y ALVARADO Fracc Reforma C P 91919 Tel 01 22 91 00 31 67 E Mail gacosta g qplus com mx Cuernavaca Compusupport de Cuernavaca SA de CV Francisco Leyva 178 Col Miguel Hidalgo C P 62040 Cuernavaca Morelos Tel 01 777 3180579 01 777 3124014 E Mail aquevedo g compusupportcva com Guadalajara Jal SERVICRECE S A de C V Av Nifios H roes 2281 Col Arcos Sur Sector Juarez 44170 Guadalajara Jalisco Tel 01 52 33 36 15 15 43 E Mail mmiranda servicrece com Monterrey Global Product Services Mar Caribe 1987 Esquina con Golfo P rsico Fracc Bernardo Reyes CP 64280 Monterrey N L M xico Tel 8129 5103 E Mail aydeem gps1 com mx Oaxaca Oax CENTRO DE DISTRIBUCION Y SERVICIO S A de C V Murgu a 708 P A Col Centro 68000 Oaxaca Tel 01 52 95 15 15 22 22 Fax 01 52 95 15 13 67 00 E Mail gpotai2001 hotmail com FOR USA SUPPORT ViewSonic Corporation 381 Brea Canyon Road Walnut CA 91789 USA Tel 800 688 6688 English 866 323 8056 Spanish Fax 1 800 685 7276 E Mail http www viewsonic com PRJ LWO03 Rev 1A 06 25 07 PJD2121 Viewsonic
27. ting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type To select an operation mode that suits your need you can follow one of the following steps Press MENU on the remote control or projector repeatedly until your desired mode is selected Go to the PICTURE gt Image menu press ENTER and Y P gt to select a desired mode 13 ViewSonic PJD2121 Picture modes for different types of signals The picture modes available for different types of signals are listed below l VGA Default Maximizes the brightness of the projected image This mode is suitable for presentation 2 ViewMatch mode Switch in between high brightness performance or Accuracy color performance 3 Video Is appropriate for playing colorful movies video clips from digital cameras or DVs through the PC input for best viewing in a blackened little light environment 4 User Allows user to adjust perfer picture modes See Setting the User mode on the following for details Setting the User mode There is one user definable mode if the current available picture modes are not suitable for your need You can use one of the picture modes except the User as a starting point and customize the settings 1 Press MENU to open the On Screen Display OSD menu 2 Goto the PICTURE gt Image menu and press Enter 3 Press P to select User 4 Press
28. ting the projection angle Correcting keystone Selecting the aspect ratio Magnifying and searching for details Pan and Scan Optimizing the image Fine tuning the image quality in user modes 14 Hiding the image Shutting down the projector ViewSonic PJD2121 Introduction Projector features The projector integrates high performance optical engine projection and a user friendly design to deliver high reliability and ease of use The projector offers the following features Quick auto search speeding up the signal detecting process Digital keystone correction to correct distorted images Ability to display 16 7 million colors Multi language On Screen Display OSD menus e Component HDTV compatibility YPbPr ViewMatch for Accurate Color Correction e Short throw projection lens Easy to use Compact size ViewSonic PJD2121 Shipping contents Carefully unpack and verify that you have all of the items shown below If any of these items are missing please contact your place of purchase Standard accessories The supplied accessories will be suitable for your region and may differ from those illustrated Optional accessories Replacement lamp ViewSonic PJD2121 ViewSonic Projector exterior view 1 Focus ring 2 Projection lens 3 Lens cover 4 LED indicator 5 Adjuster foot 6
29. tions are active areas OSD menus can be displayed on those unused black areas l Fill Scales an image to fill the projection size no matter the aspect ratio is 4 3 or 16 9 2 Native Scales an image proportionally to fit the projector s native resolution in its horizontal width 4 3 Scales an image so that it is displayed in the center of the 12 ViewSonic PJD2121 screen with a 4 3 aspect ratio This is most suitable for 4 3 images like computer monitors standard definition TV and 4 3 aspect DVD movies as it displays them without aspect alteration 4 16 9 Scales an image so that it is displayed in the center of the screen with a 16 9 aspect ratio This is most suitable for images which are already in a 16 9 aspect like high definition TV as it displays them without aspect alteration Magnifying and searching for details If you need to zoom in the details on the projected picture magnify the picture Use the direction arrow keys for navigating the picture 1 Press MENU until the DISPLAY menu is highlighted and press Enter 2 Press V to highlight Magnify and press P to select a desired value Pan and Scan When you zoom in the detail on the projected picture you may use Pan and Scan to see the details 1 Press MENU until the DISPLAY menu is highlighted 2 Press V to highlight Pan and Scan and press Enter 3 Press 4 P to select a desired value Optimizing the image Selec
30. to get optimized performance Um a 5 o em 09 ViewSonic 24 PJD2121 Appendix IR control table 25 ViewSonic PJD2121 Customer Support For technical support or product service see the table below or contact your reseller Note You will need the product serial number T Telephone F Fax AUS 1800 880 818 NZ 0800 008 822 T Toll Free 1 866 463 4775 Canada www viewsonic com T Toll 1 424 233 2533 service ca viewsonic com F 1 909 468 1202 Europe Middle East Baltic countries North Africa Hong Kong www hk viewsonic com T 852 3102 2900 service hk viewsonic com www in viewsonic com T 1800 11 9999 service in viewsonic com www kr viewsonic com T 080 333 2131 service kr viewsonic com Country Region service au viewsonic com www viewsonic com au Australia New Zealand www viewsoniceurope com Contact your reseller Latin America Argentina www viewsonic com la T 0800 666 0194 soporte viewsonic com Latin America Brazil www viewsonic com la T 0800 891 6984 soporte viewsonic com Latin America Chile www viewsonic com la T 800 440 303 soporte viewsonic com Latin America Columbia www viewsonic com la T 01 800 915 6588 soporte viewsonic com Latin America Mexico www viewsonic com la T 001 800 514 6518 soporte viewsonic com Renta y Datos 29 SUR 721 COL LA PAZ 72160 PUEBLA PUE Tel 01 222 891 55 77 CON 10 LINEAS Electroser Av Reforma No 403Gx39 y 41
31. ty Projection dimensions 4 3 image on a 4 3 screen 16 9 image on a 4 3 screen e Screen f Center of lens b Projection c image d Vertical b Projection c image d Vertical a Image Diagonal Distance height offset Distance height offset inch m m inch cm inch cm inch m inch cm inch cm inch There is 2 tolerance among these numbers due to optical component variations This will help you determine the exact mounting position so that it best suits your installation location ViewSonic PJD2121 Connection When connecting a signal source to the projector be sure to 1 Turn all equipment off before making any connections 2 Use the correct signal cables for each source 3 Ensure the cables are firmly inserted cy In the connections shown below some cables may not be included with the projector see Shipping contents on page 5 They are commercially available from electronics stores Connecting a computer or monitor Connecting a computer The projector provides one VGA input socket that allow you to connect them to both IBM compatibles and Macintosh computers A Mac adapter is needed if you are connecting legacy version Macintosh computers To connect the projector to a notebook or desktop computer 1 Take the supplied VGA cable and connect one end to the D Sub output socket of the computer 2 Connect the other end of the VGA cable to the VGA signal input socket
32. ular to each other the projected image becomes trapezoidal Do not look into the lens while the lamp is on The strong light from the lamp may cause damage to your eyes Be careful when you press the adjuster button as it is close to the exhaust vent where hot air comes from Fine tuning the image size and clarity E Sharpen the image by rotating the focus ring y Correcting keystone Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom It occurs when the projector is not perpendicular to the screen To correct this press on the projector Selecting the aspect ratio The aspect ratio is the ratio of the image width to the image height Most analog TV and computers are in 4 3 ratio which is the default for this projector and digital TV and DVDs are usually in 16 9 ratio With the advent of digital signal processing digital display devices like this projector can dynamically stretch and scale the image output to a different aspect than that of the image input signal To change the projected image ratio no matter what aspect the source is Press MENU and then press 4 gt until the DISPLAY menu is highlighted and press Enter Press V to highlight Aspect Ratio Select an aspect ratio to suit the format of the video signal and your display requirements About the aspect ratio Cy In the pictures below the black portions are inactive areas and the white por
Download Pdf Manuals
Related Search