Home

Philips 32PFL3508 32" HD-ready Black

1. For PC Input signal Normal e This unit can gt Full Unscaled also be connected to your PC that has a DVI terminal Use an HDMI DVI conversion cable for this Video connection and it requires Stereo mini 3 5mm plug Audio cable for Analog Audio signal as well e Refer to 16 9 video signal on this page if PC has HDMI Output Normal Proportionately stretched picture Sidebars appear on both edges of the screen Full Stretched out of proportion to fill the screen Unscaled Original size English TV screen information You can display the currently selected channel or other information such as the aspect ratio on the TV screen In the Digital mode the detailed broadcasting information for the current off the air channel such as program title and program guides are displayed 1 Press INFO Gi Digital TV operation A Day of Memories 1 1 1 Rating information 2 US TV TV MA US Movie X English 1 2 AUS TV TV 14 US Movie NC 17 USTV TVPC US Movie R US TV TV G US Movie PG 13 O Program title O Broadcast station O Channel number Switching channels gt p 18 O Audio language DTV audio mode Analog TV Switching audio mode gt p 19 O Program s image aspect ratio Changing picture format gt p 20 6 CC not available if Closed Caption is set to Off Caption settings gt p 26 T Child lock rating Child and ratings lock g
2. Adjusts backlight for the best picture quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room when Active Control is set to On Please ensure the room lighting is stable and the light sensor is not blocked 1 50PFL3708 46PFL3708 40PFL4708 only 2 40PFL1708 39PFL2708 only 23 English e You can set a particular Picture Quality using Advanced settings Picture Color alignment Noise reduction ctive Control Black stretch Dynamic contrast Gamma Gamma 2 to set the picture color temperature to ersonal Cool Normal or Warm eee ate F Cool N lor Wi UN When you adjust the following settings Personal picture will be set automatically Cursor lt Cursor Red gain o decrease contrast o increase contrast 8 with red with red Green gain o decrease contrast o increase contrast a g with green with green alignment Blue gain o decrease contrast o increase contrast 8 with blue with blue o decrease brightness to increase brightness Red offset A f with red with red o decrease brightness to increase brightness Green offset A with green with green o decrease brightness to increase brightness Blue offset with blue with blue Noise Off o set noise reduction to Off reduction On o reduce noise in an image Off o set Active Control to Off o adjust backlight for the best picture quality
3. This unit Turns on automatically when you Turn On your connected EasyLink device You can operate some functions such as disc playback or call up the menu of the connected devices by using this unit s remote control Device control Off Disables the device control PLAY STOP W FWD gt REV lt lt OPTIONS A Y 4 OK On BACK the NUMBER buttons can be used to control your connected EasyLink devices by this unit s remote control 30 English Device list This function lets you see the product model number or name of connected devices Use A Y to select the desired EasyLink devices listed on the TV screen then press OK Your connected EasyLink device will be Turned On if the device is in Stand by mode HDMI1 DVD recorder HDMI2 Features HDMI3 N INFO BACK ex Input Change Refresh Back Setting your location to home You can set the Location of your TV to Home or Retail Choosing Home gives you full flexibility to change predefined settings for picture and sound 1 Use A Y to select Location then press OK Caption settings Child lock PC settings Features EasyLink Location Software upgrade 2 Use A Y to select Home or Retail then press OK The unit will be set up with predefined settings for retail displays In this setting the power consumption may Retail possibly exceed the limit requirement of the ENERGY STAR qualificat
4. Video Motion JPEG 6 Upgrade your TV software Checking your current software version Upgrading the software 7 Useful tips FAQ Troubleshooting 8 Information Glossary Maintenance 9 Specifications 10 Warranty 2 22 22 23 24 24 24 25 25 25 26 26 27 27 28 29 29 29 30 30 31 31 31 32 32 32 33 33 33 36 36 36 37 38 English 3 English Register online at www productrecords com phl today to get the very most from your purchase Registering your model with Philips makes you eligible for all of the valuable benefits listed below so don t miss out Register online at www productrecords com phl to ensure Product Safety Notification Additional Benefits By registering your product you ll receive notification Registering your product guarantees that you ll receive directly from the manufacturer in the rare case of a all of the privileges to which you re entitled including product recall or safety defect special money saving offers Know these safety symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of CAUTION A uninsulated dangerous voltage within the apparatus s enclosure that may be of sufficient magnitude to constitute a risk of RISK Aire ee electric shock to persons CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT The exclamation point within an equilateral triangle is i
5. You can choose English Spanish or French as your Onscreen Language p 32 You can view Picture JPEG and Video Motion JPEG files stored on a USB Memory Stick 3 When the Setting is completed press or BACK to exit Picture Before you begin You must Set Home in Location gt p 31 Otherwise personalized Picture and Sound settings will not be Memorized after the unit goes into Standby mode 1 Press RA and use A Y to select Picture then press OK Picture Settings assistant Auto picture Personal Backlight Contrast Brightness Calor Tint Sharpness Advanced settings 2 Use A Y 4 to select the item you want to adjust then press OK Settings assistant to guide you through the best picture setting to select the desired setting then press OK Personal Standard Vivid Sports Movie Game and Auto picture Eco When you adjust the following settings Personal picture will be set automatically Cursor lt Cursor gt Bucle lore poner o e etc Contrast o decrease contrast o increase contrast Brightness o decrease brightness o increase brightness Color o decrease color intensity to increase color intensity Tint o add red o add green Sharpness o soften o sharpen o select the desired setting then press OK Color alignment Noise reduction Active Control Ambient light sensor Black stretch Dynamic contrast and Gamma Advanced settings
6. L R Video cable IN Note With this unit yellow cable must be connected to Y green jack of Component Video Input jacks Whenever you connect to the Composite Video Input jack Y VIDEO you must disconnect the Component Video Input jacks Pb and Pr If you leave those jacks connected it may cause of an unstable picture Only the left loudspeaker reproduces sound for mono equipment Use a mono to stereo adapter not supplied for sound reproduction via all internal loudspeakers 15 English PC connection The following video signals can be displayed Format Resolution Refresh rate HDMI connection This unit can be connected to your PC that has a HDMI terminal Use an YES eee HDMI cable for this Digital connection SVGA 800 x 600 XGA 024 x 768 60Hz 280 x 768 WXGA 360 x 768 FHD 1 920 x 1 080 Other formats or non standard signals will not be displayed correctly IN OUT SOPFL3708 46PFL3708 40PFL4708 40PFL1708 39PFL2708 l LAN only Ss p y HDMI cable al PC a Kiste Please purchase the VGA cable or HDMI DVI conversion cable that has a ferrite core The following operations may reduce noise Attach a ferrite core to the AC power cord of your PC Unplug the AC power cord and use the built in battery of your PC Use an HDMI cable with the HDMI logo a certified HDMI cable High Speed HDMI
7. This Limited Warranty applies only to the new products manu factured by or for Philips that can be identified by the trademark trade name or logo affixed to it This Limited Warranty does not apply to any non Philips hardware product or any software even if packaged or sold with the product Non Philips manufacturers suppliers or publishers may provide a separate warranty for their own products packaged with the bundled product Philips is not liable for any damage to or loss of any programs data or other information stored on any media contained within the product or any non Philips product or part not covered by this warranty Recovery or reinstallation of programs data or other information is not covered under this Limited Warranty This warranty does not apply a to damage caused by accident abuse misuse neglect misapplication or non Philips product b to damage caused by service performed by anyone other than Philips or Philips Authorized Service Location c to a product or a part that has been modified without the written permission of YEAR Philips or d if any Philips serial number has been removed or defaced or e product accessories or consumables sold AS IS without warranty of any kind by including refurbished Philips product sold AS IS by some retailers This Limited Warranty does not cover e Shipping charges to return defective product to Philips e Labor charges for installation or setup
8. 0 00 O Cina DIGITAL pue OUT COAXIALI gt numo n Digital Audio Output jack Digital Audio S PDIF Output to home theaters and other Digital Audio systems Component Y Pb Pr Composite Video VIDEO Input jacks for VIDEO Composite Video Input VIDEO jack is a shared jack with Component Video Input Y jack Analog Audio L R Input jacks Connect Analog Audio signals from HDMI DVI Analog Audio L R jacks signal Component Video Analog Audio L R jacks signal Composite Video Analog Audio L R jacks signal PC Connection Analog Audio L R jacks signal with Stereo mini 3 5mm plug Audio cable on PC HDMI Input jack s Digital audio and video Input from high definition Digital devices such as DVD Blu ray disc players cable satellite set top boxes PC s PC Input jack VGA cable connection for PC USB terminal Data Input from USB Memory Stick only Do not connect any device to this terminal such as Digital camera keyboard mouse etc 75 ohm Cable Antenna connection Signal Input from an antenna or cable satellite set top boxes Headphone Audio Output jack Headphone 3 5mm stereo jack for personal listening Connecting the antenna or the cable Be sure your antenna or other device is connected properly before plugging in the AC power cord If you connect to an antenna through RF cable Any DTV programs that are broadcasted in your area
9. ENERGY STAR qualification r e Select Home the unit is set to maximize the energy efficiency for home setting and it can be adjusted through a choice of picture and sound quality according to your preference Use this setting to remove the E sticker if visible from the display gt p 31 e When the initial setup is completed the lowest memorized channel with the confirmation message of the location setting will be displayed on the TV screen 5 When you select Home press OK to begin Settings assistant Settings assistant Settings assistant helps you customize picture settings You will see a series of test pictures where the right side and left side differ Select the side that is most pleasing to you with the Left Right keys The energy consumption in the Standard setting is Energy Star qualified BACK MENU Next Q Back Exit 6 Press dor P 3 times to select the side of the pictures that is the most pleasing to you then press OK Right side 1 3 Select the picture setting that you prefer N BACK x Next Q Back 7 Press OK to finish Settings assistant Settings assistant You have set up your viewing preferences gt BACK MENU a ok Store O Back C Exit e When the initial setup is completed the lowest memorized channel with the confirmation message of the location setting will be displayed on the TV screen You must set Home in step 4 Otherwise Picture and
10. Input mode of this unit is in PC mode Tap any key on the keyboard to wake up your computer ake sure that the sound is not muted Press 1 so that the volume bar d current volume level will appear on the TV screen ake sure that the volume is NOT set to 0 or adx If so use VOL to adjust to the desired volume w Adjusted Picture or Sound settings are not effective every time the unit is Turned On e You must set Home in Location gt p 31 Otherwise the settings you adjusted will not be memorized after the unit goes into Standby mode You see a distorted picture or hear an unusual sound You may be getting interference from electrical appliances automobiles motorcycles or fluorescent lights Try moving the unit to another location to see if this is the cause of the problem Ghosts lines or streaks in picture Analog TV NTSC signal e Electrical interference from nearby appliances may affect picture quality e View other TV channels The problem might be limited to the broadcasting station or weak signal strength Sound No sound distorted sound or incorrect Audio Sound is heard when using the HDMI DVI connections e Make sure that the Analog Audio signals from the HDMI DVI device are connected to the Analog Audio L R Input jacks e When using Component Analog Video Composite Analog Video or PC VGA Video make sure that the Analog Audio L R connectors are mounted into the Audio L R Inpu
11. audio channels e g When all audio are available NEO gt MONS gt DN STEREO SAP MONO Outputs stereo audio Outputs second audio program Outputs mono audio 11 SAP STEREO EasyLink options If you have our brand products such as Blu ray disc player or DVD recorder that are compatible with EasyLink functions connect them to this unit via an HDMI cable so you can simply operate various items from this unit s remote control Before you begin You must set On in Device control and EasyLink control gt p 30 Otherwise LINK does not work even if you connected our brand devices to this unit 1 Press OPTIONS to display EasyLink options menu EasyLink options Device menu Device contents Device favorite Device menu Controls the menu of your connected EasyLink device Device contents Controls the top menu of your DVD or Blu ray discs Device favorite Controls the pop up menu of your Blu ray discs 2 Use A Wor OK on this units remote control to operate the desired functions for your devices Some of EasyLink functions may not be available depending on your EasyLink devices or discs You must connect this unit to our brand EasyLink devices and be sure its EasyLink HDMI CEC setting is also set to On We do not guarantee 100 interoperability with other brands of HDMI link compliant devices Changing picture format Display modes can be selected when
12. by Active Ambient On dynamically adjusting the backlight intensity in Control accordance with lighting condition in the room o adjust backlight for best picture quality Ambient Off based on the incoming video signal Off o set ambient light sensor to Off Ambient o alter the brightness of the TV screen light sensor On automatically by detecting your room lighting evel Black Off o set black stretch to Off stretch On o enhance black color Dynamic Off o set dynamic contrast to Off LE On o enhance contrast in an image automatically Gamma 1 Gamma Gamma 2 to change the gamma setting Gamma 3 This part differs depending on the product you have 32PFL3508 PTOS 40PFL1708 32PFL4508 ps 39PFL2708 29PFL4508 24PFL4508 Active Control Ambient light sensor Before you begin You must set Home in Location gt p 31 Otherwise personalized Picture and Sound settings will not be memorized after the unit goes into Standby mode 1 Press f and use A Y to select Sound then press OK Auto sound Standard Equalizer SRS TruSurround XT Auto volume leveling TV speakers Digrtal output format Multichannel Audio setting Stereo 2 Use A Y 4D to select the item you want to adjust then press OK to select the desired setting then press OK Personal Standard Vivid Sports Movie Music and News When you adjust the following settings Eq
13. cable is recommended for the better compatibility The unit accepts 480i 480p 720p 1080i and 1080p video signals e HDMI DVI connection requires separate audio connections as well and the audio HDMI DVI connection signals are output as Analog L R Audio This unit can be connected to your PC that has a DVI terminal Use an DVI does not display 480i image which is not in compliance with EIA CEA 861 861B HDMI DVI conversion cable for this Video Digital connection and it requires Stereo mini 3 5mm plug Audio cable for Analog Audio signal as well USB Memory Stick This unit offers easy playback of picture JPEG and video Motion JPEG files Insert the USB Memory Stick into the USB terminal shown below USB gt p 32 f IN OUT D S f l HDMI DVI PC So conversion cable IN OUT Stereo mini 3 5 mm plug Audio cable VGA connection This unit is equipped with a PC Input jack If you connect this unit to your PC you can use this unit as a PC monitor Use a VGA cable for this Video connection and it requires a Stereo mini 3 5mm plug Audio cable for Analog Audio signal as well bie The unit recognizes only a USB Memory Stick Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit Not supported A USB Memory Stick is always inserted to this unit directly A USB Memory Stick is not supplie
14. cables bo Blu ray disc DVD recorder Note Ifyou have any question about the DTV s antenna visit www antennaweb org for urther information Depending on your antenna system you may need different types of combiners mixers or separators splitters for HDTV signal The minimum RF bandpass on these devices is 2 000MHz or 2GHz For your safety and to avoid damage to this unit please unplug the RF coaxial cable rom the antenna Input jack before moving the unit Ifyou did use an antenna to receive Analog TV it should also work for DTV reception Outdoor or attic antennas will be more effective than a set top box or inside antenna To Turn On your reception source easily between antenna and cable install an antenna selector Ifyou are not receiving a signal from your cable service contact the Cable provider Only the left loudspeaker reproduces sound for mono equipment Use a mono to stereo adapter not supplied for sound reproduction via all internal loudspeakers Plugging in the AC power cord ake sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made MA Caution Do not connect the AC power cord to a power supply outside the indicated voltage of this unit AC 120V Connecting the AC power cord to a power supply outside of this range may result in fire smoke unit failure or electrical shock Note Each time you plug in the AC power cord
15. has a safety certification by an new and old must be supported on proper stands or installed independent laboratory such as UL CSA ETL according to the manufacturer s recommendations Televisions e ALWAYS follow all instructions supplied by the television and that are inappropriately situated on dressers bookcases mount manufacturers shelves desks speakers chests carts etc may fall over e ALWAYS make sure that the wall or ceiling where you are resulting in injury mounting the television is appropriate Some mounts are not TUNE IN TO SAFETY designed to be mounted to walls and ceilings with steel studs e ALWAYS follow the manufacturer s recommendations for the or cinder block construction If you are unsure contact a safe installation of your television professional installer T i e ALWAYS read and follow all instructions for proper use of Televisions can be heavy A minimum of two people is your television required for a wall or ceiling mount installation e NEVER allow children to climb on or play on the television or MOVING AN OLDER TELEVISION TO A NEW the furniture on which the television is placed PLACE IN YOUR HOME e NEVER place the television on furniture that can easily be used e Many new television buyers move their older CRT televisions as steps such as a chest of drawers into a secondary room after the purchase of a flat panel e ALWAYS install the television where it cannot be pushed television Special care should be made i
16. no operations will be performed for a few seconds This is not a malfunction No supplied cables are used with these connections e Please purchase the necessary cables at your local store Before you connect AC power cord Be sure other devices are connected properly before plugging in the AC power cord Selecting your connection quality HDMI Highest quality Supports high definition Digital signals and gives highest picture and sound quality Video and audio signals are combined in one cable You must use HDMI for full high definition video and to enable EasyLink HDMI CEC Philips HDMI supports HDCP High bandwidth Digital Contents Protection HDCP is a form of Digital Rights Management that protects high definition content in Blu ray discs or DVDs Component Y Pb Pr High quality x Supports high definition Analog signals but gives lower picture quality than HDMI Component Y Pb Pr Video cables combine red green blue video cables with red white audio L R cables Match the cable colors when you connect to the TV Composite Basic quality R For analog connections Composite Video Audio Analog cable usually combine a yellow video cable with red white audio L R cables With this unit yellow cable must be connected to Y green jack of Component Video Input jacks 13 English Connecting your devices HDMI Digital connection DMI connection offers the high
17. noise Weak signal reception Multiplex signal reception ghosts or screen flutter Data dropout and Pixelation for DTV only The unit retains the Closed Caption setting if the power fails When the unit receives special effects playback signal e g Search Slow and Still from a VCR s video Output channel ch3 or ch4 the unit may not display the correct caption or text The EUT setting that satisfies 79 102 e is as follows Font Mono font Character size Large Child and ratings lock You can prevent your children from watching certain programs or certain channels by locking the TV controls and by using ratings 1 Use A Y to select Child lock then press OK Caption settings Child lock PC settings EasyLink Location Features Software upgrade 2 Use the NUMBER buttons to enter the 4 digit numbers for your PIN code e When you have not set up your PIN code enter 0 0 0 0 e When the PIN code is correct Child lock menu is displayed automatically The lower ratings will be available for viewing When you set the highest rating to O all ratings turn to To block any inappropriate programs set your automatically imits in US movie ratings lock US TV ratings lock and Region ratings lock The child lock setting will be retained after a power failure or after the power is removed for longer than 10 seconds except the PIN code reverts to 00
18. remote control signal of this unit Move the infrared equipped device away from this unit change the angle of the infrared sensor or Turn Off the infrared communication function How come the Initial setup appears every time Turn On this unit Why can not watch some RF signal TV programs Connect the RF coaxial cable to the unit directly and run the initial setup Make sure to complete the initial setup before the unit goes into Standby mode Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously unavailable channels are broadcast Make sure Autoprogram has been completed gt p 24 The selected channel may not be broadcasting When Autoprogram is interrupted and not completed some channels will not be received Make sure to complete the Autoprogram gt p 24 The selected channel cannot be viewed by the Child and ratings lock setting gt p 27 The unit requires some kind of antenna Input An indoor antenna Digital or VHF UHF an external antenna Digital or VHF UHF or an RF coaxial cable from your wall Cable Satellite set top box needs to be plugged into the unit How come there is no image from the connected external devices Check if the correct Input mode is selected by pressing 2 SOURCE or using CH Refer to Watching channels from an external device gt p 19 Check the antenna cable or other Input connection to the unit
19. this menu to change the settings for Digital caption service Selects one of these before changing any CS 1 to other item in Caption settings menu CS 6 Choose CS 1 under normal circumstances Digital caption service Picture display Font Font style Font size Font color and Font opacity Edge Edge color and Edge type Background Background color and Background opacity e Review your setting choice made below by looking in the upper right corner of the displayed setting box not all selections show the differences selected Continued on next page 27 English Note Digital caption service that you can switch differs depending on the broadcast description Caption style will not effect if the User setting is set to Off Closed Captioning service may not be controlled by this unit s menu options if you are watching television through an external cable or satellite set top box In which case you will need to use the menu options on the external set top box to control Closed Captioning The captions do not always use correct spelling and grammar Not all TV programs and product commercials include Closed Caption information Refer to your area TV program listings for the TV channels and times of Closed Caption shows The captioned programs are usually noted in the TV listings with service marks such as CC Not all captioning services are used by a TV chan
20. 00 Child and ratings lock p 27 Region ratings lock and Clear region ratings lock will be available when the unit receives a Digital broadcast using the new rating system For the United States the unit may download the Region Ratings Lock Table if required The Canadian rating systems on this unit are based on CEA 766 A and CRTC policy Channel lock Particular channels or external Input modes can be invisible in this function 3 4 Features Use A Y to select Channel lock then press OK Use A Y to select the particular channels or external Input then press OK repeatedly to switch between view and block amp indicates that the channel or Input Source is locked indicates that the channel or Input Source is not locked DMK O HDMI J HDMI L Video Lire 0 401 02 28 English aa lie ALLS To set the sub ratings Setting US movie and TV ratings As for TV Y7 TV PG TV 14 or TV MA you can further set the sub US movie ratings lock is the rating system created by MPAA ratings to block specific elements of programming To set the sub ratings US TV ratings lock has controlled access to individual programs based follow the step below on their age ratings and content rating Use A Y 4 to select the desired rating then press OK repeatedly to 3 Use A Y to select US movie ratings lock or US TV ratings lock MESE ES Diang then press OK 4 Use A Y to select the desired rating then
21. 08 39PFL2708 pA AU g A 50PFL3708 46PFL3708 A x 4 40PFL4708 39PFL2708 M4 x 0 787 20mm 8 32PFL4508 29PFL4508 24PFL4508 1 Note Make sure to use a table which can support the weight of this unit and is larger than this unit e Make sure the table is in a stable location When attaching the base ensure that FRONT with arrow written on the bottom of the base is downward If it s not downward the 2 hooks don t fit into the base When attaching the base ensure that all screws are tightly fastened If the base is not properly attached it could cause the unit to fall resulting in injuries as well as damage to the unit To remove the base from this unit unscrew the Phillips head screws in step 2 Be careful not to drop the base when you remove it English Managing cables Route your antenna cable and all other cables through the cable management tie at the back of the TV The holder helps keep your cables tidy and easily manageable d Attach the cable management tie as illustrated below The cable management tie is not supplied with your TV If you would like this part please call our toll free customer support line found on the cover of this User Manual and it will be sent to you for free of charge Installing the remote control batteries 1 Slide the battery cover off the back of the remote control 2 Insert the
22. 10mm 39PFL2708 4 M4 x 0 787 20mm 40PFL1708 3 M4 x 0 787 20mm 32PFL3508 32PFL4508 Sra 7 3 M4 x 0 984 25mm 24PFL4508 Note Ifyou lose the screws please purchase the above mentioned Phillips head screws at your local store Ifyou need to replace these accessories please refer to the part name or No with the illustrations and call our toll free customer support line found on the cover of this User Manual When using a universal remote control to operate this unit Make sure the component code on your universal remote control is set to our brand Refer to the instruction book accompanying your remote control for more details e We do not guarantee 100 interoperability with all universal remote controls Symbols used in this User Manual The following is the description for the symbols used in this User Manual Description refers to Digital TV operation e If neither symbol appears the operation is applicable to both Stand assembly 50PFL3708 46PFL3708 40PFL4708 39PFL2708 A x 4 50PFL3708 46PFL3708 x 3 40PFL4708 39PFL2708 M4 x 0 393 10mm 32PFL4508 29PFL4508 24PFL4508 Attaching the base You must attach the base to the unit to have it as a table top unit Be sure the front and rear of the base match the proper direction For large screen TVs at least 2 people are required for these steps 50PFL3708 46PFL3708 40PFL47
23. 2 supplied batteries AAA 1 5V Be sure the and ends of the batteries line up with the markings inside the case 3 Slide the cover back into position Note Remove the batteries if not using the remote control for an extended period of time 9 English Remote control PREV CH PHILIPS e S 9 O 10 English POWER Turns the TV On from Standby or Off to Standby EasyLink HDMI CEC buttons gt Begins or Restarts the Disc playback H Pauses the Disc playback a Stops the Disc playback lt lt PP Searches Backward or Forward through the disc Note You must set On in the Master EasyLink gt p 30 to operate the above functions SAP Selects Audio mode MONO STEREO SAP Audio language A MENU Displays the main menu INFO GJ Displays Information about the current program A Y lt gt NAVIGATION buttons OK oves the cursor Selects the On screen Menu items OPTIONS Opens EasyLink options menu You must set On in the Master EasyLink gt p 30 to operate the above functions SOURCE Selects Connected devices CH Selects a Channel COLOR buttons Use these Buttons according to the directions On screen O 9 NUMBER buttons Used to enter a Channel Program number e DOT Use with 0 9 to select digital channels For example to enter 2 1 press 0 m a 09 PREV CH Returns to th
24. 66 x 768 pixels 60Hz Pee screen size 49 5169 46 0 16 9 40 0 16 9 38 6 16 9 31 5 16 9 28 5 169 23 6 16 9 spect ratio Viewing angles 176 V by 178 V by 176 V by 178 V by 176 V by a 7 F F Built in Digital Analog tuner ATSC Digital NTSC Analog Sound Mono Stereo Mono Stereo SRS TruSurround XTE for 40PFL4708 39PFL2708 32PFL4508 32PFL3508 29PFL4508 24PFL4508 Mono Stereo Incredible Surround for 50PFL3708 46PFL3708 40PFL1708 Photo Slide show Power Output RMS watts 10 W x 2 8W x2 SW x 2 Equalizer 5 band Ease of use SD 4 3 Source ormal 16 9 Movie expand Zoom Wide D 16 9 Source ormal 4 3 Movie expand Zoom Wide Bi cei tomat DMI AV 4 3 Source ormal 16 9 Movie expand Zoom Wide Full DMI AV 16 9 Source ormal 4 3 Movie expand Zoom Wide Full PC Source ormal Full Unscaled Refer to HDMI AV 16 9 Source above if PC has HDMI Output JPEG files only Video playback Channel Channel coverage Only Motion JPEG 320 x 240 30fps with file extension avi will playback Terrestrial DTV ATSC VHF 2 13 UHF 14 69 each channel has e g 2 1 2 9 3 1 3 9 etc Terrestrial Analog NTSC VHF 2 13 UHF 14 69 CATV Analog NTSC 2 13 A W W 1 W 94 analog W 1 W 84 A 5 A 1 5A Tuning system
25. Channel frequency synthesized tuning system Channel access Direct access number keyboard Programmable scan and Channel up down Connectivity Component Video Input Y Pb Pr Composite Video Input shared Y green terminal with Component Video 1 supporting video signals 480i p 720p 10801 60Hz 1 HDMI Input 3 supporting video signals supporting video signals 480i p 720p 1080 60Hz 1080p 24 30 60Hz 480i p 720p 10801 60Hz 1080p 24 30 60Hz PC Input signal up to FHD 1920 x 1080 PC Input signal up to WXGA 1360 x 768 Audio L R Input 1 PC Input via VGA HDMI and HDMI DVI Analog Audio L R USB 1 Digital Audio Output 1 supporting Dolby Digi y Headphone Output 1 1 8 inch 3 5mm Power Power requirements 120V AC 10 60Hz 0 5 Temperature Operating temperature 41 F 5 C to 104 F 40 C e Specifications are subject to change without prior notice English 10 Warranty PHILIPS LIMITED WARRANTY ONE WARRANTY COVERAGE PHILIPS warranty obligation is limited to the terms set forth below WHO IS COVERED Philips warrants the product to the original purchaser or the per son receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase Warranty Period from an Authorized Dealer The original sales receipt sh
26. DVI does not display 480i image which is not in compliance with EIA CEA 861 861B 14 English Component Analog Video Connection Digital Audio Output Connection Component Analog Video connection offers better picture quality for If you connect this unit to an external Digital Audio device you can video devices connected to the unit enjoy multi channel audio like 5 1ch Digital broadcasting sound If you connect to the units Component Video Y Pb Pr Input jacks Use a Digital Audio coaxial cable to connect the unit to external Digital connect Analog Audio cables to the Analog Audio L R Input jacks Audio devices Ol 9 g 000 IN aj kid set topbox 4 Digital Audio coaxial cable O mua a OUT Audio L R cables or Digital home theater amplifier STE E IN So ON Component Y Pb Pr Video cables Blu ray disc DVD recorder Note The unit accepts 480i 480p 720p and 1080i of video signals for this connection Composite Analog Video Connection Composite Analog Video connection offers standard picture quality for video devices connected to the unit If you connect to the unit s Composite Video Y VIDEO Input jack connect audio cables to the Audio L R Input jacks When the Audio is monaural then only connect to the Audio L Input jack OUT ES ON DVD player oo ul Audio
27. ES SOURCE QO T x looooooooooo a 1 2 ES 4 5 n 7 8 0 0 0 0 0 0 0 0 0 0 l PREV CH a 0 wo Losososososoo scocococonococooo To select Channels by using CH V A or CH e Press CH Y Down A Up 1 raised dot on the Rear panel or Front panel or press CH on the Remote control To select Channels by using the NUMBER buttons e For Digital channels press a number followed by a dot and the corresponding sub channel number When selecting Digital channel 11 1 Be sure to press before entering the subchannel number a ea D E When selecting cable or Analog channel 11 D DD Press PREV CH to return to the previously viewed channel To select the non memorized channels use the NUMBER buttons No Signal will appear on the TV screen after the subchannel broadcast is over Audio only program message will appear on the TV screen when you receive only sound signal On the 46 amp 50 TV s All CONTROL Keys are located on the Rear lower right side of the unit as viewed from the Front Watching channels from an external device Switching Each Input Mode can easily switch with the remote control between TV DTV or Analog TV and external devices when they are connected to the unit 1 TumOna set top box or the connected device e The picture from your set top box or the connected device might appear automatically on the T
28. Features then press OK 2 Use A Y to select Software upgrade then press OK Current software info Upgrade Features 3 Use A Y to select Current software info then press OK e The version and a description of the current software is displayed Release Version XXXXXXX_XX_XX_XXXX_XX Features Upgrading the software You can upgrade the software by using USB Memory Stick Preparing for the software upgrade You require the following equipment e APC with web browsing capability e An archive utility that supports the ZIP format e g WinZip for Windows or Stuffit for Mac OS e An empty clean formatted USB Memory Stick Only FAT DOS formatted portable memory is supported Use only software upgrades that can be found on the Philips web site 33 English Downloading the software Find information and software related to your TV and download the latest software upgrade file to your PC 1 on your PC open a web browser and go to www philips com support Enter the model number in the Type the Model Number field 2 3 Click the desired software to be downloaded e Decompress the ZIP file 4 Copy the upgrade file to the root directory of the USB Memory Stick Starting the software upgrade Warning e When the software upgrade is running don t press any buttons Do not remove the USB Memory Stick during the software upgrade e fan error occurs during the upgrade retry
29. L NOT BE LIABLE FOR ANY INCIDEN TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD UCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusions or limitation of inciden tal or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may have other rights which vary from state province to state province P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 38 English PHILIPS P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 P amp F Mexicana S A de C V Av La Palma No 6 Col San Fernando La Herradura Huixquilucan Edo de M xico C P 52787 Philips and Philips Shield are used under license of A3AU2UH A3AQ2UH A31P2UH A3APAUH A31T2UH A3AF2UT A31F2UT A31M2UT A31L2UT Koninklijke Philips N V tk kk
30. None Dissolve Wipe right Wipe left Wipe up Wipe down Box in and Box out Press 3 then use A Y to change the display time choosing Slide time __ from Short Medium and Long Press 4 or OK to stop the Slide show While the Slide show is Off the following 2 settings will be Stop show displayed Every press on 2 will turn the picture clockwise by 90 Rotate degrees El Press 3 then use A Y to select the zoom factor 1x 2x Zoom or 4x Press OK to set the zoom factor Video Motion JPEG 1 Use A Y to select the desired file then press OK Your USB Video Video Video MOVIE1 avi Title MOVIE1 avi MOVIE1 avi Director Date 2009 04 02 Duration 00 06 37 LE OY Supported format motion jpeg 320 x 240 30FPS e To stop playback and return to the file list press BACK OK or CH e Press CH to play back from the beginning Item Detail Press 1 to display file details below M Detail Title Director Date and Duration ore Detal Press 1 again to remove file details 6 Upgrade your TV software Philips continuously tries to improve its products and we strongly recommend that you upgrade the TV software when upgrades are available New software can be downloaded from our website at www philips com support using the model number of your TV to find information Checking your current software version 1 Press ff and use A Y to select
31. Register your product and get support at www philips com support PHILIPS PHILIPS EN User Manual ES Manual del Usuario FR Manuel d Utilisation 50PFL3708 46PFL3708 40PFL4708 40PFL1708 39PFL2708 32PFL3508 32PFL4508 29PFL4508 24PFL4508 For further assistance call the customer support service in your country To obtain assistance contact Philips Customer Care Center In the U S A Canada Puerto Rico or the U S Virgin Islands 1 866 309 5962 M xico D F and rea Metropolitana 58 87 97 36 Interior de la Republica 01 800 839 19 89 Para obtener m s informaci n llame al servicio de soporte al cliente de su pa s Para obtener asistencia comun quese con Centro de atenci n al cliente de Philips En los Estados Unidos en Canad Puerto Rico o en las Islas V rgenes de los Estados Unidos 1 866 309 5962 M xico D F y rea Metropolitana 58 87 97 36 Interior de la Republica 01 800 839 19 89 Pour obtenir de l aide suppl mentaire communiquez avec le centre de service a la clientele de votre pays Pour obtenir de l aide communiquez avec le centre de service a la client le Philips au Dans le Etats Unis au Canada Puerto Rico ou aux les Vierges am ricaines 1 866 309 5962 M xico D F et Area Metropolitana 58 87 97 36 Interior de la Republica 01 800 839 19 89 PHILIPS Contents 1 Notice 2 Important Positioning the TV Regulatory notices Environmental care 3 Get started F
32. Sound settings you adjusted will not be memorized after the unit goes into Standby mode Continued on next page 17 English Note Ifyou are not receiving a signal from your cable service contact the Cable provider Ifyou press 0 or R during autoprogram this setup of TV channels will be cancelled The initial autoprogram function can be executed for either Antenna or Cable only once When you change the connection Antenna Cable select Autoprogram again gt p 24 If there is no signal Input from the antenna terminal and no operation for several seconds after you Turn On the unit helpful hints appears Follow the instructions listed on the TV screen Initial setup No channel is registered Retry Try Autoprogram again Verify that you have a cable connected to the ANTENNA IN jack on the back of the TV the channel installation process searches this connection If you are using a cable or satellite box please confirm the input which you have connected to the box and press SOURCE key on the remote control to select the appropriate source input W Select ex OK Skip After an initial setup is completed If you want to scan the channels automatically again Autoprogram gt p 24 e You can add the desired cable and Analog channels unmemorized by autoprogram Add channels gt p 25 e If you want to change to another language Language gt p 31 f you w
33. V screen If the picture does not appear Press SOURCE repeatedly to select the set top box or the connected device and wait a few seconds till the picture appears e g SE gt MEE gt EEN DTV Analog TV channel 4 y Video eee ra e Pressing A reverses the direction of the Input modes 2 Use the remote control of the set top box or the connected device to select channels Sleep timer Sleep Timer can set the unit to go into Standby mode after an incremental period of time 12222929 CC 9 steep 0 sap Press SLEEP repeatedly to change the amount of time increases the time by 30 minutes up to 120 minutes Press SLEEP once to call up the display for checking the remaining time e To cancel sleep timer press SLEEP repeatedly until Off is displayed O Sleep 120min Switching audio mode 12222929 CE SLEEP 0 sap 0 O00000 1 Press SAP to display the currently selected language Digital TV operation and the number of available languages 2 Press SAP repeatedly to cycle through the available audio languages Available languages differ depending on the broadcast Other is displayed when the audio language cannot be acquired or the acquired languages are other than English French or Spanish 19 English 11 1 English 1 3 1 Press SAP to display the currently selected audio mode 2 While receiving an MTS broadcast press repeatedly to cycle through the available
34. When using the Component Video connection check that the Green Y Blue Pb Cb and Red Pr Cr connectors are connected to their corresponding colored jacks on the unit When enter a channel number it changes automatically Many Digital channels have alternate channel numbers The unit changes the numbers automatically to the ones signifying the broadcasting station channel number These basic numbers used for previous Analog broadcasts e g Input ch 30 automatically changes to ch 6 1 Why are captions not displayed entirely Or captions are delayed behind the dialog Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts Most captioning production companies can display a dialog to maximum of 220 words per minute If a dialog exceeds that rate selective editing is used to insure that the captions remain up to date with the current TV screen dialog How can set the clock cannot change the Child lock setting because my PIN code no longer works There is no clock function on this unit If a Power failure occurs for longer than 10 seconds the child lock setting is retained but the PIN code is reset to the default code 0000 Refer to Child and ratings lock gt p 27 Troubleshooting 35 English If the unit does not perform properly when operated as instructed in this User Manual check the following Troubleshooting tips and all connections once before ca
35. ant to change the location setting Location gt p 31 e If you want to restore the picture setting Settings assistant gt p 23 4 Use your TV Switching on your TV and putting it in Standby mode 40PFL4708 32PFL4508 40PFL1708 50PFL3708 29PFL4508 39PFL2708 46PFL3708 24PFL4508 32PFL3508 Key on Rear To Turn the TV On from Standby or Off to Standby e Press 3 raised dots on the Rear panel or Front panel or the Remote control Energy consumption contributes to air and water pollution When the AC power cord is plugged in your TV consumes energy Your TV has very low standby power consumption Adjusting volume 40PFL4708 32PFL4508 40PFL1708 50PFL3708 29PFL4508 39PFL2708 46PFL3708 24PFL4508 32PFL3508 Key on Rear 020025 1 H d ssoooooooos To decrease or increase volume e Press VOL gt 1 raised dot on the Rear panel or Front panel or press VOL on the Remote control VOL Volume Down VOL gt Volume Up To mute or unmute sound e Press 1 on the remote control to mute the sound e Press a again or VOL to recover the original sound 18 English Switching channels 40PFL4708 32PFL4508 40PFL1708 5OPFL3708 29PFL4508 39PFL2708 46PFL3708 24PFL4508 32PFL3508 a Key on Rear EZ
36. bass and clear dialog from only two speakers 36 English Maintenance Cabinet Cleaning e Wipe the front panel and other exterior surfaces of the unit with a soft cloth Never use a solvent or alcohol Do not spray insecticide liquid near the unit Such chemicals may cause damage and discoloration to the exposed surfaces Panel Cleaning Wipe the panel of the unit with a soft cloth Before cleaning the panel disconnect the AC power cord Should your unit become inoperative do not try to correct the problem yourself There are no user serviceable parts inside Call our toll free customer support line found on the cover of this User Manual to locate an authorized service center IR Signal Check If the Remote Control is not working properly you can use a Digital or Cell Phone Camera to see to see if it is sending out an infrared signal e g With a Digital camera Point the Digital Camera towards the Remote Control infrared diode at the front of the Remote Control Press any key on the Remote Control and ook at the Camera Display If an infrared pulsating ight appears on the Display the Remote Control is sending out an IR signal Note Some Cameras have an IR Filter and will not Display the IR signal 37 9 Specifications Model 50PFL3708 46PFL3708 40PFL4708 40PFL1708 39PFL2708 32PFL3508 32PFL4508 29PFL4508 24PFL4508 Picture Type FHD 1920 x 1080 pixels 60Hz WXGA 13
37. can be received for free through an antenna connection cable P a antenna IN If you connect a set top box through RF cable If the TV is connected to a cable satellite set top box via a coaxial connection set the TV to channel 3 4 or the channel specified by the service provider IN antenna aut IN RF cable set top box Co If you connect a set top box through HDMI If the TV is connected to a cable satellite set top box via HDMI make sure you select the correct Source by using E SOURCE HDMI cable set top box If you connect a set top box through Component Video Input If the TV is connected to a cable satellite set top box via Component Video Input make sure you select the correct Component Video Source by using E SOURCE RF cable Audio L R cables aad Cont IN ee C c OUT set top box Component Y Pb Pr video cables 12 English Connecting a set top box Blu ray disc DVD recorder via composite connectors and Analog Audio Do not place your recorder too close to the screen because some recorders can be susceptible to signals OUT cable RF cable IN set top box E EE 000 RF cable OUT 5 UT Audio L R T cco Video cables y gok OUT IN mae ZN Tp IN Audio L R Video
38. cycled and reused At the end of its life specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of Please ensure you dispose of your old TV according to local regulations Disposal of used batteries The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations 3 Get started Features DTV Analog TV CATV You can use your remote control to select channels which are broadcast in Digital format and conventional Analog format Also cable subscribers can access their cable TV channels e Information display You can display the title contents DTV only and other information of the current program on the TV screen e Autoprogram This unit automatically scans and memorizes channels available in your area eliminating difficult setup procedures e Child lock This feature allows you to block children s access to inappropriate programs e Closed Caption decoder Built in Closed Caption decoder displays text for Closed Caption supported programs e MTS SAP tuner Audio can be selected from the remote control e Auto Standby If there is no Input signal and no operation for 15 minutes the unit will go into Standby mode automatically e Sleep timer You can set
39. d with this unit We do not guarantee that all USB Memory Sticks can be supported by this unit Be sure to keep a backup copy of the original files on your device before you play them back on this unit We have no responsibilities for damage or loss of your stored VGA cable data IN icc To protect your USB Memory Stick files from being erased place the write protect m sliding tab in the protect position pe When you are ready to remove a USB Memory Stick set the unit to go into Standby Op mode to avoid any damage to your data and the unit IN OUT A USB Memory Stick that requires its own driver or the device with a special system such as fingerprint recognition are not supported This unit is not allowed to use the USB Memory Stick which requires an external power supply 500mA or more Stereo mini 3 5 mm plug Audio cable These operations are accessible by remote control Some may also be accessible by control panel on the main unit Initial setup This section will guide you through the unit s initial setting which includes selecting a language for your on screen menu and autoprogram which automatically scans and memorizes viewable channels Before you begin Make sure the unit is connected to antenna or cable 1 After making all the necessary connections press to Turn On the unit lt may take a few moments to Turn On the unit for the f
40. e occurs Ifyou forget the PIN code unplug the AC power cord then wait for 10 seconds to plug the AC power cord in again The unit will restore the PIN code to 0000 as the factory default EasyLink HDMI CEC This function allows you to operate the linked functions between our brand devices with a EasyLink feature and this unit connecting through an HDMI cable You must connect this unit to our brand EasyLink devices and be sure its EasyLink setting is also set to On 1 Use A Y to select EasyLink then press OK Master EasyLink Auto device off Auto TV on Features Device control Device list 2 Use A Y 4 to select the item you want to adjust then press OK Set the EasyLink control On or Off The following additional settings will be grayed out when you set to Off Off Disables all EasyLink Master EasyLink Selects if you have connected an On external device that is compatible with the EasyLink function You can set your device to Turn Off by interlocking from this unit s power Off Your connected EasyLink device stays on even if the unit goes into Standby mode Auto device off Your connected EasyLink device Turns On Off automatically when the unit goes into Standby mode This unit will Turn On when the Power On signal is sent from your connected EasyLink device Auto TV on Off On This unit stays in Standby mode even if you Turn On your connected EasyLink device
41. e previously viewed Channel 1 amp MUTE Turns the Sound On and Off VOL Adjusts the Volume BACK Returns to the previous Menu operation FORMAT Adjusts the Picture size on the TV screen SLEEP Sets Sleep Timer cc Displays the audio portion of programming as text superimposed over the video Control panel 50PFL3708 46PFL3708 Keys on Rear Control Keys are located on the Rear side of the TV OOOO O E 4 vol V cH A MENU SOURCE o 40PFL4708 only 40PFL1708 39PFL2708 32PFL3508 4 vo gt Y CH A MENU SOURCE O 6 646 40PFL1708 39PFL2708 only A VOL lt gt Adjusts the Volume In the Menu screen moves the Cursor Left lt 4 Right gt VOL 4 Volume Down VOL gt Volume Up CH A V Selects a Channel In the Menu screen moves the Cursor Up A Down Y MENU Opens the Main On screen Menu SOURCE Selects Connected devices db POWER Turns the TV On and Off Remote Control Sensor Receives IR signal from Remote control So 2 eo Power On Standby Indicator On lights in white Standby no light Ambient Light Sensor Alters the brightness of the TV screen automatically by detecting your room lighting level Do not block this Light Sensor window to allow proper operation 11 English Terminals o OCS
42. eatures Supplied accessories Symbols used in this User Manual Stand assembly Attaching the base Managing cables Installing the remote control batteries Remote control Control panel Terminals Connecting the antenna or the cable Connecting a set top box Blu ray disc DVD recorder via composite connectors and Analog Audio Plugging in the AC power cord Selecting your connection quality Highest quality Component Y Pb Pr High quality Composite Basic quality Connecting your devices DMI Digital connection DMI DVI connection Component Analog Video Connection Composite Analog Video Connection Digital Audio Output Connection PC connection USB Memory Stick Initial setup 4 Use your TV Switching on your TV and putting it in Standby mode Adjusting volume Switching channels Watching channels from an external device Sleep timer Switching audio mode EasyLink options Changing picture format TV screen information O O amp O OW Oo 18 18 18 18 19 19 19 20 20 21 5 Use more of your TV Displaying the Main Menu Picture Sound Setup Autoprogram Channel list Add channels Antenna confirmation Features Caption settings Child and ratings lock Channel lock Setting US movie and TV ratings Canadian English or Canadian French ratings Change Pl PC settings EasyLink HDMI CEC Device list Setting your location to home E sticker Language USB Picture JPEG
43. ent signal lines This allows the viewers to experience picture colors as original as it is There are several signal formats including Y Pb Pr and Y Cb Cr Dolby Digital The system developed by Dolby Laboratories to compress Digital sound It offers stereo sound 2ch or multi channel audio DTV ATSC nitialism that stands for Advanced Television Systems Committee and he name of the Digital broadcasting standards E sticker E sticker is showing set features technical information etc on this TV set hat is displayed on the TV screen mainly used by TV retailers Previously he information was on a printed sticker that was put on the display HDMI High Definition Multimedia Interface nterface that supports all uncompressed Digital Audio Video formats including set top box Blu ray DVD recorder or Digital television over a single cable HDTV High Definition TV Ultimate Digital format that produces high resolution and high picture quality PIN code A stored 4 digit number that allows access to parental control features SAP Secondary Audio Program Second audio channel delivered separately from main audio channel This audio channel is used as an alternate in bilingual broadcasting SDTV Standard Definition TV Standard Digital format that is similar to the Analog TV picture quality SRS TruSurround XT Creates a truly immersive surround sound experience with rich
44. er than two years of age 2 Important Positioning the TV e Large screen TVs are heavy 2 people are required to carry and handle a large screen TV ake sure to hold the upper and bottom frames of the unit firmly as illustrated e Install the unit in a horizontal and stable position Do not install the unit in direct sunlight or in a place subject to dust or strong vibration A e Depending on the environment the temperature of this unit may increase slightly This is not a malfunction e Avoida place with drastic temperature changes Do not place anything directly on top or bottom of the unit e Depending on your external devices noise or disturbance of the picture and or sound may be generated if the unit is placed too close to them In this case please ensure enough space between he external devices and the unit Do not insert the AC power cord into the power socket outlet before all the connections are made e Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power e Before you move the TV disconnect attached cables to prevent damage to connectors Be sure to unplug the AC power cord from the AC outlet before moving or carrying the unit Regulatory notices Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning pulling standing or climbing on it A falling unit can cause serio
45. est picture quality DMI High Definition Multimedia Interface transports high definition Digital video and multi channel Digital Audio through a single cable EE set top box or AE IN OUT Blu ray disc player 4 WD 0 f HDMI cable HD game console HDMI DVI connection This unit can be connected to your device that has a DVI terminal Use an HDMI DVI conversion cable for this connection and it requires audio cable for Analog Audio signal as well cable receiver or satellite box with the DVI Output jack f IN OUT D 000 IN f l HDMI DVI Enum conversion cable OUT Audio L R cables Note Use an HDMI cable with the HDMI logo a certified HDMI cable High Speed HDMI cable is recommended for the better compatibility For HDMI connection The unit accepts 480i 480p 720p 1080i 1080p 24 30 60Hz of video signals 32kHz 44 1kHz and 48kHz of audio signals e This unit accepts 5 1 channel audio signal Dolby Digital and 2 channel audio signal LPCM This unit accepts only signals in compliance with ElA861 For HDMI DVI connection The unit accepts 480i 480p 720p 1080i and 1080p video signals HDMI DVI connection requires separate audio connections as well and the audio signals are output as Analog L R Audio
46. f your TV 2 Press ff and use A Y to select USB then press OK e The highlighted text will move to the name of your USB Memory Stick then press OK again Your USB This menu allows you to enjoy your pictures and videos via your USB device 3 Use A Y to select the Picture or Video then press OK e The files recorded under the following specifications are required Picture JPEG Upper limit 24Mpixe Size 320 x 240 QVGA Video Frame rate 30fps Motion JPEG Sampling frequency Audio type LPCM 32 kHz 44 1 kHz or 48 kHz Quantization bit rate 16 bit Note Up to 2GB FAT16 or 8GB FAT32 capacity can be supported Up to 10 000 files or 1 000 folders with 19 hierarchies can be recognized Up to 255 English characters can be recognized This unit does not support MTP Media Transfer Protocol This unit supports FAT16 and FAT32 file systems If the file is not supported an error message appears When the USB Memory Stick is not recognized try reconnecting it again We cannot be held responsible if your USB Memory Stick is not supported nor will we accept any liability for damage or loss of stored data To protect your USB Memory Stick files from being erased place the write protect sliding tab in the protect position Be sure to keep a backup copy of the original files on your device before you play them back on this unit This unit does not recognize USB Memory Stick that require
47. he receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for help Declaration of Conformity Trade Name PHILIPS Responsible Party P amp F USA Inc Model 50PFL3708 46PFL3708 40PFL4708 40PFL1708 39PFL2708 32PFL3508 32PFL4508 29PFL4508 24PFL4508 PO Box 2248 Alpharetta GA 30023 2248 USA Telephone Number 1 866 309 5962 Address 5 Modifications This apparatus may generate or use radio frequency energy Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the User Manual The user could lose the authority to operate this apparatus if an unauthorized change or modification is made Cables Connections to this device must be made with shielded cables with metallic RFI EMI connector hoods to maintain compliance with FCC Rules and Regulations Canadian notice CAN ICES 3 B NMB 3 B Standard Television Receiving Apparatus Canada BETS 7 NTMR 7 Copyright All other registered and unregistered trademarks are the property of their respective owners The terms HDMI and HDMI High Definition Hom ultimedia Interface and the HDMI Logo are DEFINEN MUG MEDIA NTEREAEE rademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries anufactured under license from Do
48. ical position The V Chip can block non rated programs as per CEA 608 E sec L 3 If the option down to block NR None or E programs is used in US movie ratings lock US TV ratings Clock lock Canadian English rating or Canadian French rating accordingly unusual results oc tod tti tod tti may occur and the unit may not receive emergency bulletins or other types of Phase O Cecreas e SETS Value tO Increase setting valle programming Emergency Bulletins Such as EAS messages weather warnings and others Locally originated programming News Political Public Service Announcements Religious Sports Weather Note You may not obtain an appropriate screen with Auto adjustment for some signals In this case adjust the settings manually Change PIN Adjust Phase setting after Clock setting has been properly adjusted Although the default PIN code 0000 is supplied with the unit you can set your own PIN code 3 Use A Y to select Change PIN then press OK 4 Press the NUMBER buttons to enter the new 4 digit PIN code Enter PIN code again in Confirm PIN entry field Enter PIN A Features Confirm PIN L BACK H PINCode Back Make sure new PIN code and confirm PIN code must be exactly the same If they are different the space is cleared for reentering Your PIN code will be erased and returns to the default PIN code 0000 when a power failur
49. ings gt p 23 Electrical interference from nearby appliances may affect picture quality Adjust Contrast and Brightness in Picture settings gt p 23 View other TV channels The problem might be limited to the broadcasting station or weak signal strength For the best picture quality watch High Definition wide screen programs If he HD content is not available watch Standard Definition programs instead When the capabilities of the unit exceed the capabilities of the Digital broadcasting the signal will be increased to match the capabilities of the display of the unit This may cause noise or trash Press the power button first If it does not solve the problem then press the buttons on the remote control in the order shown below SLEEP gt FORMAT gt gt gt A gt V gt O Picture amp Sound No picture or sound Check if the Power is on Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu ray DVD recorder View other TV channels The problem might be limited to the broadcasting station or weak signal strength Unplug the AC power cord and wait for about 1 minute then plug the AC power cord and Turn On the unit again Check whether the connection of the Antenna or Cable Satellite set top box is connected correctly ake sure that the selected Input mode is connected to the working Input jack Check if your computer is NOT in sleep mode when the
50. ion This setting is ENERGY STAR qualified Home The unit is set to maximize the energy efficiency for Home setting and it can be adjusted through a choice of Picture and Sound quality selections according to your preference Note You must set Home Otherwise personalized picture and sound settings will not be memorized after the unit goes into Standby mode E sticker When you set Location to Retail store E sticker Electronic Sticker is displayed E sticker can be Turned Off using procedure below 1 Use A Y to select E sticker then press OK 2 Use A Y to select Off then press OK Off You can Turn Off E sticker Top E sticker is displayed on top of the TV screen Bottom E sticker is displayed on bottom of the TV screen Note Ifyou select Home E sticker will not be displayed 31 English 1 Press ft and use A Y to select Language then press OK Select your menu language English Seleccione el idioma para el menu Language S lectionnez la langue du menu Ifyou need the English menu instead of the Spanish or French menu s press A Use A Y to select Idioma or Langue then press OK Use A Y to select English then press OK Press RA to exit the main menu USB Your TV is fitted with a USB connection that enables you to view photos or watch Motion JPEG files stored on a USB Memory Stick 1 Connect the USB Memory Stick to the USB terminal on the side o
51. irst time e Initial setup menu appears automatically after the unit is Turned On Use A Y to select the on screen language from the choices N English Espa ol Fran ais on the right side of the TV screen then press OK Use A Y to select Antenna for TV channels or Cable for CATV channels then press OK 199 Initial setup Make sure the antenna is connected to ANTENNA IN jack Antenna Select your signal source Antenna O Cable a La ANTENNA IN N BACK MENU 0 0 Select cx 14 O Back O Skip When Antenna is selected the TV detects antenna signals It searches for DTV and Analog TV channels available in your area When Cable is selected the TV detects signals supplied by cable It searches for DTV Analog TV and Cable channels available in your area e Autoprogram will begin Initial setup Please wait while the system is scanning for channels Auto programming may take more than 20 minutes to complete Digital channels Analog channels 4 Use A Y to select the desired location setting then press OK Home is the ENERGY STAR qualified setting 16 English Initial setup Location Home is recommended for normal home use and is ENERGY STAR qualified In the Retail Store mode all settings are fixed e Select Retail the unit will be set up with predefined setting fo retail displays In this setting the power consumption may possibly exceed the limited requirement limit of the
52. lby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DOLBY DIGITAL SIS is a trademark of SRS Labs Inc TruSurround XT technology is incorporated S S under license from SRS Labs Inc TruSurround XT SRS TruSurround XT creates a truly immersive surround sound experience with rich bass and clear dialog from only two speakers SRS TruSurround XT technology is supported in 40PFL4708 39PFL2708 32PFL3508 32PFL4508 29PFL4508 24PFL4508 only ENERGY STAR is a joint program of the U S Environmental Protection Agency and the U S Department of Energy helping us all save money and protect the environment through energy efficient products and practices E ENERGY STAR Consumer Notice This TV has been set to maximize energy efficiency while delivering the best possible picture using the factory installed home mode settings Changing or enabling other features in this TV e g brightened backlighting will possibly increase energy consumption beyond the original ENERGY STAR qualified limits LED backlighting technology uses less energy when compared with a standard CCFL ecotv backlighting LCD television of the same a screen size Actual energy savings will vary depending on the screen size Portions of this software are copyright O The FreeType Project www freetype org The American Academy of Pediatrics discourages television viewing for children young
53. lked on or pinched particularly at plugs convenience receptacles and the point where hey exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Wall Mount Bracket Kit Brand Model Screw dimension 50PFL3708 46PFL3708 SQM6485 40PFL4708 39PFL2708 SQM6435 17 40PFL1708 SAN25BB 32PFL3508 32PFL4508 29PFL4508 SAN18B 24PFL4508 MST15 The recommended Wall Mount Bracket Kit sold separately allows the mounting ofthe TV on the wall For detailed information on installing the wall mount refer to the Wall Mount Instruction Book P amp F USA is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV Wall Mount Bracket or mount the TV onto the Bracket on your own The Wall Mount Bracket must be installed by experts 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fa
54. llen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Example of Antenna Grounding as per NEC National Electric Code GROVNDECLAME ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H ELECTRIC SERVICE EQUIPMENT P amp F USA is not liable for these types of accidents or injury noted below nstall the Wall Mount Bracket on a sturdy vertical wall f installed onto a ceiling or slanted wall the TV and Wall Mount Bracket may fall which could result in a severe injury ength If screws too long are used this may cause mechanical or electrical damage inside the TV set If screws too short are used his may cause the TV set to fall Do not fasten the screws by excessive force This may damage he product or cause the product to fall leading to an injury For safety reasons use 2 people to mount the TV onto a Wall ounting Bracket Do not mount the TV onto the Wall Mou
55. lling for service Power No power Remote ake sure the AC power cord is plugged in ake sure that the AC outlet supplies the proper voltage plug another electrical appliance into the AC outlet to ensure that the AC outlet operates normally f a power failure occurs unplug the AC power cord for 1 minute to allow he unit to reset itself Control buttons do not work Press only one button at a time Do NOT press more than one button at he same time Ensure that no buttons on the remote control are depressed and move freely Universal remote control does not work properly Refer to the user manual of the universal remote control for the Philips code Picture Power is ON but no screen image No color Picture poor sound OK You see noise or trash on the screen Unusual picture appears and the TV does not operate Check whether the connection of the Antenna or Cable Satellite set top box is connected correctly Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu ray disc DVD recorder Make sure that the selected Input mode is connected to the working Input jack Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode Tap any key on the keyboard to wake up your computer View other TV channels The problem might be limited to the broadcasting station or weak signal strength Adjust Color in Picture sett
56. n the placement of pulled over or knocked down older CRT televisions e ALWAYS route cords and cables connected to the television e ALWAYS place your older CRT television on furniture that is so that they cannot be tripped over pulled or grabbed sturdy and appropriate for its size and weight e NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb over the edge of your furniture A C E o rg safety JE e ALWAYS make sure your older CRT television does not hang Consumer Electronics Association 4 Important Safety Instructions Non auna 10 11 12 Read these instructions eep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding ype plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being wa
57. nel during the transmission of a Closed Caption program Closed Caption will NOT be displayed when you are using an HDMI connection To show the Closed Caption on your TV screen broadcast signal must contain the Closed Caption data Not all TV programs and commercials have the Closed Caption or all types of the Closed Caption Note Captions and texts may not exactly match the TV voice EN Changing channels may delay the Closed Caption for a few seconds e When you select a rating and set it to X or O the higher ratings will be blocked Channel lock US movie ratings lock US TV ratings lock Canadian English rating Features Canadian French rating Region ratings lock Change PIN Adjusting or muting the volume may delay the Closed Caption for a few seconds Abbreviations symbols and other grammatical shortcuts may be used in order to keep pace with the on screen action This is not a malfunction The caption or text characters wi not be displayed while the main menu or functions display is shown Ifa black box appears on the TV screen this means that the Closed Caption is set to the text mode To clear the box select CC 1 CC 2 CC 30r CC 4 Ifthe unit receives poor quality television signals the captions may contain errors or there might be no captions at all Some possible causes of poor quality signals are Automobile ignition noise Electric motor
58. ntended to REMOVE COVER OR BACK NO USER SERVICEABLE PARTS alert the user to the presence of important operating and INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL maintenance servicing instructions in the literature accompanying the apparatus The caution marking is located on the rear or bottom of the cabinet WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert ATTENTION Pour viter les choc lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond PHILIPS Visit our World Wide Web Site at www philips com support CHILD SAFETY PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY WALL OR CEILING MOUNT YOUR TELEVISION CARES e ALWAYS contact your retailer about professional installation if e Manufacturers retailers and the rest of the consumer you have any doubts about your ability to safely mount your electronics industry are committed to making home television entertainment safe and enjoyable e ALWAYS use a mount that has been recommended by the e As you enjoy your television please note that all televisions television manufacturer and
59. nting Bracket while your TV is plugged in or Turned On It may result in an electrical shock injury When installing the unit on the wall allow this much space Top 11 8 inches 30cm 5 9 inches 15cm 3 9 inches 10cm Left and right side Bottom Do not use screws that are longer or shorter than their specified English 1 Notice Trademarks are the property of Koninklijke Philips N V or their respective owners P amp F USA reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of he system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of heir validity and suitability must be obtained P amp F USA warrants that he material itself does not infringe any United States patents No further warranty is expressed or implied P amp F USA cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to P amp F USA will be adapted and published on the P amp F USA support website as soon as possible Pixel characteristics This LCD product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear cons
60. of the product adjust ment of customer controls on the product and installation or repair of antenna signal source systems outside of the product e Product repair and or part replacement because of improper installation or maintenance connections to improper voltage supply power line surge lightning damage retained images or screen markings resulting from viewing fixed stationary con tent for extended periods product cosmetic appearance items due to normal wear and tear unauthorized repair or other cause not within the control of Philips Damage or claims for products not being available for use or for lost data or lost software e Damage from mishandled shipments or transit accidents when returning product to Philips A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications A product used for commercial or institutional purposes including but not limited to rental purposes e Product lost in shipment and no signature verification receipt can be provided e Failure to operate per Owner s Manual TO OBTAIN ASSISTANCE IN THE U S A CANADA PUERTO RICO OR U S VIRGIN ISLANDS Contact Philips Customer Care Center at 1 866 309 5962 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON SUMER PHILIPS SHAL
61. owing the product name and the purchase date from an authorized retailer is considered such proof WHAT IS COVERED The Philips warranty covers new products if a defect in material or workmanship occurs and a valid claim is received by Philips within the Warranty Period At its option Philips will either 1 repair the product at no charge using new or refurbished replacement parts or 2 exchange the product with a product that is new or which has been manufactured from new or ser viceable used parts and is at least functionally equivalent or most comparable to the original product in Philips current inventory or 3 refund the original purchase price of the product Philips warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety 90 days or for the remaining portion of the original product s warranty whichever provides longer coverage for you When a product or part is exchanged any replacement item becomes your property and the replaced item becomes Philips property When a refund is given your product becomes Philips property Note Any product sold and identified as refurbished or renewed carries a ninety 90 day limited warranty Replacement product can only be sent if all warranty requirements are met Failure to follow all requirements can result in delay WHAT IS NOT COVERED EXCLUSIONS AND LIMITATIONS
62. pletes successfully Added to the channel list is displayed If external Input is used it is not possible to register the channel and Unavailable will be displayed on the TV screen Some channels cannot be selected by CH Use the NUMBER buttons to select the memorized channels Antenna confirmation This function lets you check the Digital signal strength of each channel 1 Use A Y to select Antenna then press OK 2 Use the NUMBER buttons or CH to select the channel for which you want to check the Digital signal strength cu EE Ch Change Ifthe channel is set to Analog channel or external Input you cannot confirm the antenna condition 26 English Features 1 Press RM and use A Y to select Features then press OK a same language as the program s dialog a up to 4 lines of script on the TV screen The primary caption and text services The captioning or text is displayed in the Caption settings Child lock PC settings EasyLink Location Serve as the preferred data channels ee The captioning or text is often a 7 secondary language Caption service CC 2 Rarely available and broadcasters use CC 4 T2 them only in special conditions such as d T4 when CC 1 and CC 3 or T 1 and T 3 HS are not available Features Software upgrade e There are 3 display modes according to programs Displays input characters on the TV screen Paint on immediately m Once cha
63. press OK repeatedly to switch between view and block e For US TV ratings you can further set the sub ratings to block specific elements of programming Features X or A indicates that the rating is locked FV Fantasy Violence TV Y7 e J indicates that the rating is not locked US movie ratings lock O O O Y O O a O US TV ratings Sub Rating a FV Fantasy Violence Features are 4 TV PG D Dialog L Language TV 14 S SEx V Violence L Language TV MA S Sex V Violence Note US TV ratings lock Blocked sub rating will appear beside the main rating category in US TV ratings lock menu You cannot block a sub rating if the main rating is set to O Changing the category to X or O automatically changes all its sub ratings to the same X or O Features ES O Ty ratings Description ratings All All ratings locked including no rating NR None No rating TV Y Appropriate for all children TV Y7 Appropriate for all children 7 and older G TV G General audience PG TV PG Parental guidance suggested PG 13 Unsuitable for children under 13 TV 14 Unsuitable for children under 14 R la NC 17 o one under 17 admitted X TV MA ature audience only 29 English Canadian English or Canadian French rating
64. racters are stored in memory they are ao Pop on displayed all at once 2 Adjust the following ttems l Roll up Displays the characters continuously by scrolling max 4 lines You can choose the size font color background and other Caption settings characteristics of the caption text Closed Captioning displays the audio portion of programming as text Font style superimposed over the video Fontsize Closed Captioning Use A Y to select Caption settings then press OK Font ont style size color Font color and transparency can be changed Font opacity Closed Caption i i Background Caption service Caption style lor sj color A Digital caption service Background and transparency o 2 Background he displayed caption Features Caption style opacity c n be switched Edge color Edge color and type Edge of the displayed 8 Edge type caption can be switched 2 Use A Y 4 to select the item you want to adjust then press OK You can choose the closed caption display Off Closed caption is not displayed On Closed caption is always displayed CC wi Closed caption is displayed when the mute sound is off Note You can cycle through the Closed Caption settings by pressing CC Closed Caption Digital TV operation n addition to the basic Closed Caption DTV has its own Closed Caption called Digital caption service Use
65. s PC settings You can select the rating for Canadian English or Canadian French This function lets you adjust the PC screen position clock and phase broadcasting during PC Input 3 Use A Y to select Canadian English rating or Canadian French Use lt P to adjust Clock setting to stabilize the PC screen and Phase rating then press OK setting to improve the clarity of the PC screen 4 Use A Y to select the desired rating then press OK repeatedly to 1 Use A Y to select PC settings then press OK switch between view and block X indicates that the rating is locked e indicates that the rating is not locked Canadian Canadian ek ares Ste reall Geechee Description Horizontal position All locked all ratings Features Vertical position Clock E Exempt program f Phase C For all children C8 For children over 8 G General audience 8ans Unsuitable for ages under 8 PG Parental guidance suggested 2 Use A Y to select the item you want to adjust then press OK e The horizontal vertical position clock and phase of the PC screen are automatically adjusted 13ans Unsuitable for ages under 13 14 Unsuitable for ages under 14 Auto adjustment Select if you want to adjust automatically Unsuitable fi der 16 16ans nsuitable for ages under EN ENE 18 18ans Adult audience only Horizontal position to move PC screen left to move PC screen right Note A to move PC screen to move PC screen up Vert
66. s a special driver This unit is not allowed to use the USB Memory Stick which requires an external power supply 500mA or more A file name exceeding 128 characters or contains a dot character is not supported on this TV Progressive JPEG files are not supported Only a Motion JPEG file with an avi extension is supported An extension mov is not supported During Motion JPEG playback Pause Forward and Reverse do not work on this unit 32 English Picture JPEG 1 Use A Y to select the desired file then press OK Your USB Picture Picture Picture Image1 jpg Image1 jpg BERET Image jpg 1200 900 2009 04 02 17 42 06 Thumbnails B Press OK key to play pause To toggle between List and Thumbnails press the NUMBER 2 button each time e The unit goes to the Slide show automatically To pause play the Slide show press OK Use the NUMBER buttons 1 through 4 to see the file detail EB or change the following settings A EJ See the description in table below Item Detail 1 Press 1 to display file details below a E Name Album Date Size and Next More Detail Press 1 again to remove file details Press 4 or OK to start the Slide show While the Slide show is on the following 2 settings will be displayed Start show Press 2 then use A Y to select the transition mode choosing from Transitions
67. speakers P P off not to output sound from the unit s speakers TV speakers to control Audio Output from your Speakers connected EasyLink Compliant Devices EasyLink with VOL by using this unit s remote control You can select audio output through a digital audio output connector to output multichannel signals MER P When the audio of the content is PCM Digital output Multichannel it will be output in PCM even if format Multichannel is selected PCM to output PCM signals 24 English You can set the output mode as a default for the sound mode Analog TV only This setting is not interlocked when you change the output mode by pressing SAP Refer to Switching audio mode gt p 19 Stereo to output stereo audio Audio setting Mono to output mono audio SAP to output second audio program Before you begin Make sure the unit is connected to antenna or cable 1 Press Rand use A Y to select Setup then press OK Autoprogram Channel list Add channels Antenna 2 Adjust the following items Autoprogram Be sure the RF cable is correctly connected to this unit and you are registered with your cable TV provider when you install Cable channels 1 Use A Y to select Autoprogram then press OK e If you run Autoprogram when you have locked channels a message appears asking to enter your PIN Enter your PIN in order to complete the ins
68. t p 27 Press INFO Gi to hide the information Note When the program guide consists of more than 4 lines use A W to scroll to the next previous lines No description provided is displayed when the program guide is not provided While the program guide is displayed the Closed Caption function is interrupted In external Input mode the following screen is displayed e g When an external device is connected to Video Input jack Video ssoi so 43 AI cc The information display will automatically disappear in 5 seconds 21 English 22 English 5 Use more of you r TV 2 Use A Y to select the desired Menu and an item then press OK or use A Y gt to determine the setting This section describes the overview of the Main Menu displayed when you press i i ma The Main Menu consists of the function setting items below Picture p 23 Adjusting the Picture Mode or customize the Picture quality as your preference Displaying the Main Menu 1 Press A to display the Main Menu Sound gt D 24 Adjusting the Sound Mode Equalizer and some other Sound functions Picture Settings assistant Setup mmp p 24 Auto picture Personal Backlight Scanning the Channels available in your area and see what the Antenna Signal levels are Contrast Brightness Color mA p26 Sharpness Adjusting the Closed Caption Parental Guide and some Advanced settings other useful functions p3
69. t jacks Sound poor Picture OK e View other TV channels The problem might be limited to the broadcasting station or weak signal strength e Check if the audio cable is connected into the unit correctly You switch to a different Input and the volume changes e This unit will memorize the volume level from the last time you adjusted it e Ifthe volume of the sound from another device is higher or lower then the loudness will change e Make sure Auto volume leveling is set to On gt p 24 Screen You switch to a different Input and the screen size changes e This unit will memorize the viewing mode from the last time you used the particular Input modes The display image does not cover the entire screen e If you are using the unit as a PC monitor make sure that Horizontal position and Vertical position in PC settings are set correctly e Ifyou are watching TV or using the Composite Video Component Video or HDMI with 480i Input press FORMAT repeatedly to switch various screen modes Different color marks on the TV screen e View other TV channels The problem might be limited to the broadcasting station missing data or pixelation Captions Captions are displayed as a white box No caption is displayed in the Closed aptior supported program Interference from buildings or weather conditions may cause captioning to be incomplete if watching Analog TV signals e Broadcasting station may shorten the program to insert adver
70. tallation You need to set the channel lock again after the installation 2 Use A Y to select an appropriate option then press OK When Antenna is selected the TV detects any off the air antenna signals It searches for ATSC Digital and NTSC Analog channels available in your area When Cable is selected the TV detects signals supplied by cable It searches for DTV Analog TV and Cable channels available in your area Autoprogram will rescan all channels Back Auto programming may take more than 20 minutes to complete Select your signal source Language Antenna T Cable Orns L ANTENNA IN Continued on next page e When the scanning and memorizing channels are completed the lowest memorized channel will be displayed Autoprogram Please wait while the system is scanning for channels Auto programming may take more than 20 minutes to complete ss as ll Digital channels Analog channels Note After setting Autoprogram using CH skips unavailable programs automatically Ifyou are not receiving a signal from your cable service contact the Cable provider Ifyou press 0 or RA during autoprogram the setup of TV channels will be cancelled Even if Autoprogram is completed the channel setting will be lost if the AC power cord is unplugged before the unit goes into Standby mode by pressing The PIN Code will be required once you set a PIN code in the Child and ra
71. tantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Service Centers and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in this manual any adjustments or assembly procedures not recommended or authorized in this manual shall void the warranty Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B Digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and t
72. the procedure or for further assistance please contact Call Center 1 Connect your USB Memory Stick with the upgrade file to the USB terminal on the side of your TV P Press and use A Y to select Features then press OK Use A Y to select Software upgrade then press OK Use A Y to select Upgrade then press OK UAWN Read the on screen instructions and confirm that you want to continue with the installation Start now Would you like to upgrade the software Features 6 When the software upgrade is completed press to set the unit into Standby mode then remove the USB Memory Stick and then press again to Turn the unit On e The TV starts up with the new software For further assistance please contact Call Center 7 Useful tips FAQ Question 34 English Answer My remote control does not work What should do Check the antenna or cable connection to the main unit Check the batteries of the remote control Check if there is an obstacle between the infrared sensor window and the remote control Test the signal Output use IR Signal Check gt p 36 If okay then possible infrared sensor trouble Aim the remote control directly at the infrared sensor window on the front of the unit Reduce the distance to the unit Re insert the batteries with their polarities as indicated When there is an infrared equipped device such as PC near this unit it may interrupt the
73. the unit to go into Standby mode after a specific amount of time e Choices for on screen language Select your on screen language English Spanish or French Stereo sound function e PLL frequency synthesized tuning Provides free and easy channel selection and lets you tune directly to any channel using the number and decimal point buttons on the remote control e Various adjustment for picture and sound Customizes image quality suitable for your room and sets your sound preference EasyLink via HDMI link EasyLink allows your other HDMI link devices to be controlled by the HDMI cable connected to your TV HDMI Input HDMI DVI Input If your video device has DVI Output jack use an HDMI DVI conversion cable to connect the unit e Component Video Input PC Input AV Input USB terminal The picture JPEG and video Motion JPEG files stored on a USB Memory Stick can be played back on this unit e Digital Audio Output e Headphone Audio Output 7 English Supplied accessories User Manual Quick Start guide Remote Control and TV base and screws batteries 50PFL3708 46PFL3708 40PFL4708 39PFL2708 AAA 1 5V x 2 ODO 40PFL1708 32PFL3508 E e 32PFL4508 29PFL4508 24PFL4508 E a Screws packed with this unit 1 vvv lw Model Quantity Size 50PFL3708 AGPFL3708 8 M4 x 0 472 12mm 4OPFL4708 3 M4 x 0 393
74. tings lock p 27 lf Pi want to change your PIN code follow the instruction of Change PIN gt p 29 Channel list The channels selected here can be skipped when selecting the channels using CH Those channels can still be selected with the NUMBER buttons 1 Use A Y to select Channel list then press OK 2 Use A Y to select the channel you want to remove then press OK Highlight channels for Ch Up Down key selection 0 4 Ch Select ex Watch Skip Back e The channel display for the removed channel darkens You will not be able to select the channel again using CH e To reactivate a removed channel use A Y and press OK The registered channels are highlighted e When you remove a main channel its subchannels are removed as well Note The channel with DTV indicated on the display is ATSC Otherwise the channel is Analog TV NTSC 25 English Add channels This function lets you add the off the air Analog TV or Analog Cable channels that were not added by the autoprogram due to reception conditions during the initial setting 1 Use A Y to select Add channels then press OK 2 Use the NUMBER buttons to enter the number of the channel you want to add then press OK Add channels For analog channels select a channel to be added using number keys For digital channels you must perform Autoprogram function BACK H Ch Change Back If setup com
75. tisements e The Closed Caption decoder cannot read the information of the shortened program Black box is displayed on the TV screen e The text mode is Selected For caption select CC 1 CC 2 CC 3 or CC 4 Note The LCD screen is manufactured to provide many years of useful life Occasionally a few non active pixels may appear as a fixed point of blue green or red This is not to be considered a defect in the LCD screen Some functions are not available in specific modes but this is not a malfunction Read the description in this User Manual for more details on correct operations 8 Information Glossary Analog TV NTSC Acronym that stands for National Television Systems Committee and the name of Analog broadcasting standards Off the air Analog TV signals are no longer being sent by major broadcasting stations in the USA Aspect ratio The width of a TV screen relative to its height Conventional TVs are 4 3 in other words the TV screen is almost square widescreen models are 16 9 the TV screen is almost twice as wide as its height CEC Consumer Electronics Control This allows you to operate the linked functions between our brand devices with CEC feature and this unit We do not guarantee 100 interoperability with other brands of CEC compliant devices Component Video This is a video signal format that conveys each of 3 principal colors of light red blue and green through differ
76. ualizer SRS TruSurround XT Incredible Surround and Auto volume leveling Personal sound will be set automatically Auto sound Adjust the tonal quality for each frequency Cursor Cursor gt Equalizer to adjust each level of tonal quality Press BACK to go back to the previous menu This selects sound modes for more spatial or surround sound reproduction SRS Off to set SRS TruSurround XT to Off TruSurround XT On to set SRS TruSurround XT to On ncredible Surround gives you the stereophonic virtual space through your existing 2 channel stereo system Incredible Off Natural effect Surround On Emphasized effect This part differs depending on the product you have SRS TruSurround XT for 40PFL4708 39PFL2708 32PFL3508 32PFL4508 29PFL4508 24PFL4508 Incredible Surround for 50PFL3708 46PFL3708 40PFL1708 This function keeps a constant loudness differential between the TV commercials and the programs Off to remove the auto volume leveling Auto volume leveling On to reduce volume differences between the TV commercials and the programs You can select the Audio Output from the units speakers or not If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit some sound operations such as volume up can be changed by using this unit s remote control On to output sound from the unit s
77. us injury or even death This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 4 inches 10cm or more around this apparatus Press to turn the unit on and go into standby mode To completely turn Off the unit you must unplug the AC power cord Disconnect the AC plug to shut the unit off when trouble is found or not in use The AC plug shall remain readily available Never use a gas duster on this TV The gas trapped inside of this unit may cause ignition and explosion 6 English CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type WARNING Batteries battery pack or battery installed shall not be exposed to excessive heat such as sunshine fire or the ike WARNING To prevent injury this apparatus must be securely attached to the furniture wall in accordance with the instructions Tipping shaking or rocking the unit may cause injury death Environmental care The packaging of this product is intended to be recycled Contact your local authorities for information about how to recycle the packaging For product recycling information please visit www recycle philips com End of life directives Philips pays a lot of attention to produce environment friendly products in green focal areas Your new TV contains materials which can be re
78. your TV receives a 16 9 or 4 3 video signal Three types of display modes can be selected for a PC Input signal Press FORMAT repeatedly to switch the TV aspect ratio For 16 9 video Normal Full can also be selected after Wide if an HDMI device is selected This picture format similarly displays like Normal signal gt 1 et 43 Movie expand y Full HDMI device only Wide Zoom Normal Original size 43 Shortened horizontally Sidebars appear on both edges of the screen Movie expand Vertically stretched to fill the screen This only crops out the top of the picture Zoom Maximum size without changing its horizontal and vertical ratio Wide Horizontally stretched picture This crops out the left and right sides of the picture For 4 3 video signal Normal Full can also be select after Wide if an HDMI Movie expand device is selected This picture format similarly displays like 16 9 Full HDMI device only Wide Normal Original size Sidebars appear on both edges of the screen 16 9 Stretched horizontally to fill the screen Movie expand Stretched more vertically at the top of the screen This crops out the top of the picture Maximum size that is more vertically stretched to fill the Zoom screen This crops out the top and bottom of the picture Wide Original size and the edges stretched horizontally to fill the screen

Philips 32PFL3508 32" HD-ready Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 32PFL3508 32&quot; HD-ready Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 32PFL3508 32" HD-ready Black