Home

Philips 46PFL4908H/12 46" Full HD 3D compatibility Smart TV Wi-Fi Black LED TV

1. EN 5 Legal Notice 2013 TP Vision Netherlands B V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners TP Vision Netherlands B V reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained TP Vision Netherlands B V warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied TP Vision Netherlands B V cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Terms of warranty e Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself e Usethe TV and accessories only as intended by the manufacturer e he caution sign printed on the back of he TV indicates risk of electric shock ever remove the TV cover Always contact Philips Customer Care for service or repair
2. More sound settings You can change the settings in the Sound menu 1 Press ff 2 Select Setup gt TV settings gt Sound then press OK 3 Select a setting to change then press OK e Sound style Access predefined sound settings e Restore style Restore the last selected predefined sound setting e Bass Adjust the bass level of the speaker and headphones e Treble Adjust the treble level of the speaker and headphones e Surround mode Select a surround sound mode to enhance your audio experience e Auto incredible surround 3D Select a surround sound mode to enhance your audio experience in 3D mode For certain models e Headphone volume Adjust headphone volume e Advanced Access advanced settings to enhance your audio experience Auto volume levelling Enable the reduction of sudden volume changes for example when switching channels TV speakers Select the preferred speakers to stream audio from the TV See Connect your TV gt Set up EasyLink devices gt Select speaker output Page 60 Clear Sound Enhance sound quality Audio Out format Select the type of audio output through the digital audio output connector Choose between Multichannel and Stereo EN 38 Audio Out levelling Set the output level for stereo audio Select Less for a certain amount of loss in intensity or signal strength Select More for no loss in intensity or signal str
3. Play files from computer What you need e A wired or wireless home network connected with a Universal Plug and Play uPnP router e Optional An LAN cable that connects your TV to your home network e Amedia server running on your computer e Appropriate settings on your computer firewall to allow you to run the media server Set up the network 1 Connect your TV and the computer to the same home network See Connect your TV gt Connect to a network and the Internet Page 61 2 Switch on your computer and the router Note If the apparatus does not retum to DLNA mode due to external electrical disturbances e g electrostatic discharge user intervention is required Set up media sharing 1 Install a media server on your computer to share media files These are some media servers e For PC Windows Media Player 11 or higher or TVersity e For Mac Twonky 2 Switch on media sharing on your computer using the media server For more information on how to set up the media server refer to the media server s website EN 19 English Play files 1 Press amp SOURCE 2 Select Browse network then press OK 3 Select a file from the content browser then press OK to start play 4 Press the Play buttons to control play 5 Optional To select a different media server select Media server Tips e Select the top bar to filter your files by type e Select Sort to arrange the fil
4. 4 3D start 18 3D switch off 18 A amplifier select output 60 analogue channels fine tune 40 analogue channels install 39 analogue channels subtitles 43 audio language 43 auto subtitle shift 60 Auto switch off devices 59 C cables 47 CAM 64 CAM enable 64 CAM insert 64 channel list 14 channel list copy 40 channels 14 channels favourites 14 channels fine tune analogue 40 channels hide or unhide 14 channels install analogue 39 channels install automatic 39 channels install digital 39 channels install satellite 41 channels logo 14 channels reinstall 46 channels rename 14 channels sort 14 channels switch 14 channels update 40 child lock 36 CI 64 dock 35 codecs supported 70 Common Interface 64 computer play files 19 Conditional Access Module 64 connect computer 56 connect digital camcorder 54 connect digital camera 53 connect disc player 48 connect external hard disk 55 connect game console 51 connect home network 61 connect home theatre 52 connect Internet 61 connect keyboard 57 connect mouse 57 connect recorder 50 connect TV receiver 49 connect USB device 55 connect video call camera 56 connected device rename 58 connectivity 72 connectivity guide 10 connectors 47 contact Philips 10 contr
5. 4 Follow the onscreen instructions EN 22 Smart TV high quality DivX Video On Demand videos What you can do With Internet Applications apps which are specially adapted Internet websites for your TV you can enjoy these features and more e Read newspaper headlines e Watch and rent videos e Check weather forecasts e Catch up with TV programmes that you missed Find out more about Smart TV services from the Smart TV forum website www supportforum philips com Note e Smart TV services and apps vary from country to country e Avallability of catch up TV apps and heir TV programmes is subject to your TV s country setting To find out which TV programmes are available access he programme guide within the app e Smart TV displays one page at a time in full screen view e Certain websites may not display completely Functions that require plug ins may be unavailable e P Vision Netherlands B V bears no responsibility regarding the content and he quality of the content provided by he content service providers What you need 1 On your home network connect the TV to the Internet 2 On your TV configure Smart TV 3 Optional On your PC register with Philips to enjoy exclusive benefits and receive updates on product information You can register at any time li Connect the TV to the Internet 1 On your home network connect a router with a high speed
6. 47 PHILIPS All registered and unregistered trademarks are the property of their respective owners Specifications are subject to change without notice Philips and the Philips shield emblem are r stered trademarks of Koninklijke Philips Electronics N V and are used under license from Koninklijke Philips Electronics N V 2013 TP Vision Netherlands B V All rights reserved www philips com
7. Do not use a USB hard drive Download the latest software 1 Connect the USB flash drive to your computer 2 On your computer launch a browser such as Internet Explorer or Safari and see www philips com support 3 Find your TV and locate the software and drivers available for your TV set The software upgrade is available as a compressed file zip 4 If the software version is higher than the version on your TV click the software upgrade link 5 Accept the licence agreement and download the ZIP file to the USB flash drive Note Some Internet browsers such as Mozilla amp Firefox or Google amp Chrome may download the ZIP file directly to your computer If this happens copy the file to your USB flash drive 6 For Internet Explorer Using a file archiver extract autorun upg from the downloaded ZIP file Do not copy or place the extracted file into a folder 6 For Safari When the download is complete autorun upg is automatically extracted from the ZIP file to your computer Copy the file to the USB flash drive Do not copy or place the file into a folder 7 Eject and disconnect the USB flash drive from the computer EN 45 English Upgrade the TV software Caution e Do not switch off the TV or remove he USB flash drive during the software upgrade e Ifa power failure occurs during the upgrade do not remove the USB flash drive from the TV The TV continues h
8. If you are viewing the programme guide for the first time follow the onscreen instructions to update the guide Customise Internet programme guide You can use the programme guide to e Schedule recordings of programmes See Use more of your TV gt Record TV shows gt Schedule recordings Page 28 e Identify channels e Select day of display e Reload and zoom into the programme guide information e View security information Note Options may vary according to the programme information available from the broadcaster 1 In the programme guide press Ht OPTIONS 2 Select an option then press OK e Record Set a scheduled recording e Identify channel Manually update channel information e Select day Select the day to display e Manual record Set a scheduled recording e Reload Page Refresh the page display e Zoom Change zoom level of page display e Security info Display programme security information e Picture and sound Your TV comes with predefined picture and sound settings To apply these settings or to customise them see Using your TV gt Watching TV gt Using picture and sound presets Page 15 e Screen off If you only want to listen to audio from the TV you can switch off the TV display Other functions continue to operate normally EN 17 English Watch 3D What you need Your TV is a 3D TV Before you watch 3D read the health warning info
9. O online forum 10 online video rent 24 P parental rating 36 pause TV 26 pause TV USB hard drive 26 PC di Philips video camera 56 splay resolutions 69 picture format 16 picture settings 37 picture settings reset 39 Pixel Plus link 60 placement stand or wall 5 placement tips 5 play computer files 19 play USB files 20 power specifications 69 presets picture and sound 15 product support 10 programme guide 16 programme guide broadcaster 16 programme guide Internet 17 R rear controls 11 record TV one touch 28 record TV USB hard drive 27 record TV programmes 27 recorder connect 50 recordings delete 29 recordings schedule 28 recordings watch 29 recycle 9 reinstall 46 remote control 11 rename channels 14 rename connected device 58 rent online video 24 5 safety 3 satellite add or remove 42 satellite install channels 41 satellite settings 41 SCART 47 schedule recordings 28 screen care 5 sensors 11 settings assistant 37 settings audio format 38 settings game 34 settings network 63 settings picture 37 settings sound 38 shop mode 45 kype 30 kype block contact 31 kype contacts 31 kype receive call 31 kype settings 33 kype setup 30 kype sign in 30 ky
10. PCM Pulse Code Modulation Refer to the documentation accompanying your device for instructions There is a picture but the sound quality is poor Make sure that the sound settings are correctly set Connection issues There are problems with HDMI devices ote that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from an HDMI device e fthe TV does not recognise the HDMI device and no picture is displayed switch the source from one device to another and back again e fthere are intermittent sound disruptions make sure that output settings from the HDMI device are correct e fyou use an HDMI to DVI adapter or HD o DVI cable make sure that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack only You cannot use EasyLink features Make sure that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible If an HDMI CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is muted increased or decreased When a HDMI CEC audio device is connected this behaviour is normal USB device content is not displayed ake sure that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation ake sure that the USB storage de
11. Statement Once complete select Accept and press OK 3 When prompted add information about your name Skype name password and email address 4 Once complete select Create an account and press OK Your new account is accepted and you are signed in If prompted follow the onscreen instructions to make changes to the entries Sign out from Skype In the Skype menu select Sign Out then press OK Manage contacts You can add and view contacts that are online or offline You can also block or unblock a selected contact Add a contact 1 In the Skype menu select Contacts then press OK 2 Press tt OPTIONS then select Add Skype contact or Add SkypeOut Contact 3 Press OK to display the onscreen keyboard 4 Follow the on screen instructions to enter the details A list of profiles is displayed 5 Select a contact then press OK An invitation request is sent to the contact The contact name appears offline until the contact accepts the request Accept a contact request Other Skype users can invite you to be on their contact list You will be notified of their request which you can accept or decline Rename a contact 1 In the Skype menu select Contacts then press OK 2 Select a contact then press ttt OPTIONS 3 Select Rename then press OK 4 Follow the onscreen instructions to edit the information Block a contact 1 In the Skype menu select Contacts then pr
12. You can watch a demo to find out more about the features on this TV 1 While you watch TV press fft 2 Select Setup gt Watch demos then press OK 3 Select a demo then press OK Home mode Some TV settings may not be available in Shop mode To make sure that the correct TV settings are applied set the TV to Home mode 1 While you watch TV press fft 2 Select Setup then press OK 3 Select TV settings gt General settings gt Location 4 Select Home or Shop then press OK 5 Restart the TV Update software Check version 1 Press ff 2 Select Setup gt Software settings gt Current software inf then press OK The current software version is displayed Caution Do not install a lower version of software than the current version installed on your product TP Vision cannot be held liable or be made responsible for problems caused by a software downgrade Update the software through one of these methods e update with USB storage device e update from digital broadcast e update from the Internet Update with USB What you need e AUSB storage device that has at least 256 megabytes of storage space is FAT or DOS formatted and has its write protection disabled e Access to a computer with a USB connector and Internet access e A file archiver program that supports the ZIP file format for example WinZip for Microsoft Windows or Stufflt for Macintosh Note
13. failure to follow the instructions the warranty does not apply Risk of electric shock or fire ever expose the TV to rain or water ever place liquid containers such as vases near the TV If liquids are spilled on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have he TV checked before use e ever place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times ever insert objects into the ventilation slots or other openings on the TV ever expose the remote control or batteries to rain water or excessive heat e To disconnect the TV from the mains power the power plug of the TV must be disconnected When disconnecting the power always pull the power plug never the cord Ensure that you have full access to the power plug power cord and outlet socket at all times Risk of damage to the TV e wo people are required to lift and carry a TV that weighs more than 25kg or 55lbs e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand e When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall m
14. scrambled Display all channels in the channels list e Scrambled channels Display only scrambled channels e Free channels Display only free channels Note The filtering options may vary according to your broadcaster Switch between antenna and cable channels You can switch between antenna and cable channels while you are watching TV 1 While you watch TV press fft 2 Select Setup gt Channel settings gt Channel installation gt Antenna connection 3 Select Antenna DVB T to watch antenna channels or Cable DVB C to watch cable channels then press OK Rename channels When you select a channel its name appears You can change this channel name 1 While you watch TV press LIST The channel list is displayed 2 Select the channel to rename then select ttt OPTIONS 3 Select Rename then press OK The onscreen keyboard is displayed 4 Press the Navigation buttons to select each character then press OK 5 Once complete select Done then press OK to confirm Reorder channels After the channels have been installed you can reorder the channel list 1 While you watch TV press LIST The channel list is displayed 2 Press tf OPTIONS 3 Select Reorder then press OK 4 Select the channel to reorder then press OK 5 Press the Navigation buttons to move the highlighted channel to another location then press OK 6 Once complete press ttf OPTION
15. the second TV to match the country setting of the first TV See Change your TV settings gt Reset all Page 46 8 Connect the USB storage device to the second TV 9 Press ff 10 Select Setup gt Channel settings or Satellite settings 11 Select Channel installation gt Copy channel list gt Copy to TV then press OK The channel list is copied to the second TV 12 Disconnect the USB storage device Satellite settings What you can do This TV can receive signals from 4 different low noise block down converters LNBs An LNB is mounted at the end pole of the dish antenna and captures signals from a satellite Note e Satellite reception is available for certain models only Search for satellite is only available if the TV supports DVB S e To receive satellite channels connect a satellite receiver to the SAT connector on your TV Install satellite channels Reinstall satellites 1 While you watch TV press fft 2 Select Setup gt Search for satellite gt Reinstall satellites 3 Follow the onscreen instructions to complete the installation 4 Once complete select Finish then press OK Select connection type When you install satellite channels you need to set the connection type The number of LNBs on your dish antenna determines the number of satellite channels you can install 1 While you reinstall satellites select Settings then press OK 2 S
16. then press OK 2 Select Change Password then press P 3 Follow the onscreen instructions to enter your current and new passwords 4 Once complete select Apply then press OK What you need e Connect your game console to this TV See Connect your TV gt Connect devices gt Game console Page 51 e Atwo player kit PTA508 or PTA518 sold separately for two player full screen gaming The kit comes with two pairs of gaming glasses See the user manual of the glasses for information on how to charge them and switch them on Start gaming 1 Press SOURCE 2 Select the game console then press OK 3 If needed load a game disc on the game console then select a game to play 4 Follow the onscreen instructions to start gaming Start two player full screen gaming Some games offer multi player and split screen gaming The 3D technology of this TV can display the split screens as two full screen views With the two player gaming glasses each player can experience different views on the same TV 1 Press amp SOURCE 2 Select the game console then press OK 3 If needed load a game disc on the game console 4 On the game console select a multi player or two player game then select split screen viewing EN 33 English 5 Press ttf OPTIONS on the TV remote control 6 Select Picture and sound gt Two player gaming 7 Select Top bottom or Side by side then
17. your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health Energy label The European Energy Label informs you on the energy efficiency class of the product The greener the energy efficiency class of this product is the lower the energy it consumes On the label you can find the energy efficiency class the average power consumption of the product in use and the average energy consumption for 1 year You can also find the power consumption values for the product on the Philips website for your country at www philips com TV EN 9 English Help and support Use Help To access the onscreen Help menu press the Blue button To exit from the Help menu press fft Visit the Philips website If you can t find what you need in the onscreen Help visit the Philips support website at www philips com support On the Philips support website you can also e Find answers to Frequently Asked Questions FAQ e Download a printable PDF version of his user manual e Email us a specifi
18. Automatic Manual or Country dependent then press OK Change the time zone In countries with clock transmission data you can change the time zone if Auto clock mode gt Automatic or Country dependent is selected 1 In the Clock menu select Time zone 2 Select your time zone then press OK Set daylight saving time In countries with clock transmission data you can enable or disable daylight saving time if Auto clock mode gt Automatic or Country dependent is selected 1 In the Clock menu select Daylight saving 2 Select Standard time or Daylight saving time then press OK EN 35 English Set the clock manually You can set the date and time manually Before you start set the clock mode to Manual 1 In the Clock menu select Date or Time then press OK 2 Set the time or date with the Navigation buttons 3 Select Done then press OK Sleep timer You can switch the TV to standby after a specified time During the countdown to the specified time you can switch off your TV earlier or reset the sleep timer 1 Press ff 2 Select Setup gt TV settings gt General settings gt Sleep timer 3 Select the sleep timer duration The sleep timer can be set up for to 180 minutes To switch off the sleep timer set it to zero minutes 4 Press OK to activate the sleeptimer After the specified time the TV switches to standby Lock or unlock
19. TV audio to a connected DMI CEC audio device e EasyLink autostart When a DMI CEC audio device is connected automatically switch off TV speakers and stream TV audio to the device Change TV audio streaming You can switch audio between TV speakers and a connected amplifier at any time 1 Press tff OPTIONS 2 Select Picture and sound gt Speakers 3 Select one of the following then press OK EN 60 e TV On by default Stream TV audio through TV and the connected HDMI CEC audio device until the connected device switches to system audio control TV audio is then streamed through the connected device e Amplifier Stream audio through the connected HDMI CEC device If system audio mode is not enabled on the device audio continues to stream from the TV speakers If EasyLink autostart was selected the TV prompts the connected device to switch to system audio mode Retain picture quality If your TV picture quality is affected by the picture processing features of other devices you can switch on Pixel Plus Link Switch on Pixel Plus Link 1 Press ff 2 Select Setup gt TV settings gt General settings gt EasyLink 3 Select Pixel Plus Link gt On then press OK Maximise video display Some subtitles create a separate subtitle bar under the video that limits the video display area To maximise the video display area you can switch on auto sub
20. USB hard drive to the TV and format it If the TV does not recognise the USB hard drive use a PC to format it to NTFS or FAT32 system then try again Caution e P Vision is not responsible if the USB hard drive is not supported nor is it responsible for damage to or loss of data in the device e Formatting removes all data from the connected USB hard drive EN 26 e he USB hard drive is formatted exclusively for this TV Keep it permanently connected to the TV You cannot access the contents of the USB hard drive from another TV or PC e Do not overload the USB port If you connect a USB hard drive device that consumes more than 500mA power make sure that it is connected to its own extemal power supply Note Make sure that the TV and the USB hard drive are switched off e While you are formatting the USB hard drive do not connect other USB devices to the TV LA i 1 Connect the USB hard drive directly to the TV or if you intend to connect other USB devices in future connect the USB hard drive through a USB hub 2 Switch on the TV and the USB hard drive if it has an external power source 3 Switch to a digital TV channel 4 Press Il to start formatting the USB hard drive 5 Follow the onscreen instructions to complete the formatting process Warning The formatting process may take some time Do not switch off the TV or disconnect the USB hard drive until this process is c
21. You can also update the TV software directly from the Internet by connecting the TV to the Internet See Connect your TV gt Connect to a Network and the Internet Page 61 1 Press ft 2 Select Setup gt Update software gt TV with Internet then press OK 3 Follow the onscreen instructions to start the update When the update is complete the TV switches to standby and on again automatically Wait for the TV to switch back on Do not switch the TV on yourself Note e If the TV is connected to the Internet the TV displays the availability of new software at startup e Philips may occasionally push a software upgrade to your TV over the Internet Follow the on screen instructions to upgrade the TV software Reset all You can reset all picture and sound settings and reinstall all TV channels on your TV 1 Press ft 2 Select Setup gt TV settings gt General settings gt Reinstall TV then press OK 3 Follow the onscreen instructions 5 Connect your TV About cables Cable quality Before you connect devices to the TV check the available connectors on the device Connect the device to the TV with the highest quality connection available Good quality connectors transfer picture and sound better The connections shown in this user manual are recommendations only Other solutions are possible For more examples visit http www connectivityguide philips com Tip If y
22. connection to the Internet 2 Switch on the router 3 Install the network See Connect the TV gt Connect to a network and the Internet Page 61 Start Smart TV 1 Press SMART TV The terms and conditions of use are displayed 2 Follow the onscreen instructions to complete registration Note The first time you start Smart TV a prompt asks if you want to enable parental control to lock adult apps If you lock an adult app advertisements and web pages that are not adapted for Smart TV will remain accessible Access Smart TV apps You can access apps through the Smart TV home page The icons on this page represent the apps installed on your TV To access an app select the app then press OK to confirm Add apps 1 Select App Gallery then press OK 2 Select an app then press OK to add it to your home screen 3 Follow the onscreen instructions to add the app Tips e You can search for apps available in other countries e To return to the Smart TV home page press LIST Note Smart TV services are updated automatically To view the latest updates in App Gallery select All then change to New Access websites 1 Select an Internet app then press OK 2 Select the web address field then press OK A keyboard appears on the screen 3 For each character of the web address select the character then press OK Tip You can also use the Numeric buttons on the TV remote c
23. e Mute Mute the microphone e Hold Put the call on hold e End call End the call e Dial pad Access the dial pad e Start My Video Start video camera Make a video call With video calls you can talk face to face with live video from your TV for free 1 From the Skype menu select Contacts then press OK 2 Select the contact then press OK 3 Select Video call then press OK EN 31 English Full screen view If your contact has a camera connected and accepts the call you can see the person on your TV in full screen To check what your contact can see view the display in the small screen on your TV 1 During the call press ttf OPTIONS 2 Select Full view then press OK Zoom and pan your video 1 In Full view select Zoom to zoom in or zoom out A zoom and pan icon appears above the video display 2 Use the Navigation buttons on the remote control to pan or tilt the camera Video call options During a video call press ttf OPTIONS to access these options e Full view See your contact in full screen view e Dial pad Access dial pad e Hold Put the call on hold Full view will be stopped e Mute Mute the microphone e Stop My Video Stop the video feed to your contact s screen Call a phone With Skype you can call land line phones and mobile phones Note No emergency calls with Skype Skype is not a replacement for your telephone and cannot
24. equipment in the home network e When playing video over your wireless home network we recommend that you use an IEEE 802 11 N router The connection speed may differ according to the operating environment of your wireless home network Start wireless setup 1 Switch on your wireless network router 2 Press ft on the TV remote control 3 Select Setup gt Connect to network then press OK 4 Follow the onscreen instructions EN 62 WPS Wi Fi Protected Setup 1 If your router supports Wi Fi Protected Setup WPS press the WPS button on the router 2 After 2 minutes select WPS on the TV then press OK The TV connects to your network This takes about 2 minutes Most new wireless routers have the WPS system and carry the WPS logo The WPS system uses WPS security encryption and cannot be combined with devices on your network that use the WEP Wired Equivalent Privacy security encryption If you still need the WEP devices in your network install with Scan gt Custom Scan for routers If you have several routers in your network you can select the network you need 1 To select a specific network router press Scan on the first page of the installation The routers with WPS and the strongest signal are shown first in the list on screen 2 Select the router you need then press OK e If you are connecting to a WPS router select WPS on the TV e fyou want to set the PI
25. output of the device The picture from broadcasts is scrambled You may need a Conditional Access Module to access content Check with your service operator An e sticker banner displaying information appears on the TV display The TV is in Shop mode To remove the e sticker set the TV to Home mode then restart the TV See Change your TV settings gt Other settings gt Home mode Page 45 The computer display on the TV is not stable e Make sure that your PC uses the supported resolution and refresh rate See Specifications gt Display resolutions Page 69 e Change the TV picture format to Unscaled Sound issues There is a picture but sound quality is poor If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction ake sure that all cables are properly connected ake sure that the volume is not muted or set to zero ake sure that the TV speaker setting is selected Press ttf OPTIONS select Picture and sound gt Speakers then select TV ake sure that the TV audio output is connected to the audio input on the HDMI CEC enabled or EasyLink compliant home theatre device Sound should be heard from the home theatre speakers e Some devices may require you to manually enable HDMI audio output If HDMI audio is already enabled but you still do not hear audio try changing the digital audio format of the device to
26. to insert a smart card into the Conditional Access Module 1 Switch off the TV 2 Follow the directions printed on the CAM to insert the CAM into the Common Interface slot at the side of the TV Push the CAM in as far as it will go 3 Switch on the TV then wait for the CAM to be activated This takes a few minutes To maintain access to encrypted digital TV channels leave the CAM in the slot EN 64 Access CAM services 1 After you insert and activate the CAM press ttf OPTIONS 2 Select Common interface then press OK 3 Select the CAM provider then press OK 6 Troubleshooting General issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Make sure that the power cable is securely connected When you are turning the TV on off or to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up This does not affect performance The TV does not respond to remote control or TV controls when switched on The TV requires some time to start up During this time the TV does not respond to the remote control or TV controls This is normal behaviour If the TV continues to be unresponsive to the remote control view the remote control sensor through a digital camera if you press any b
27. with SOURCE 1 Press amp SOURCE 2 Select a device then press OK Select a device from Home menu 1 Press fft 2 Select Source then press OK 3 Select a device then press OK Reset device settings You can reset the type and name of the device to default settings 1 In the Source menu select the device and press Ht OPTIONS 2 Select Original name and icon then press OK Set up EasyLink devices Update the source list If you add or remove a device update the source list 1 Press amp SOURCE 2 Press tf OPTIONS 3 Select Scan connections then press OK 4 Follow the onscreen instructions Change device settings Change the device type You can change the device type to easily access it from the Source menu 1 Press amp SOURCE 2 Select the device then press Device type 3 Select a suitable device type then press OK Rename a device You can rename a device after it is connected to the TV 1 Press SOURCE 2 Select the connector then press Rename 3 Use the on screen keypad to enter a new name 4 When complete select Done then press OK EN 58 What you can do You can get the most out of your DMI CEC compliant devices with Philips asyLink enhanced control features Connect our HDMI CEC compliant devices through DMI to your TV and control them at the same time with your TV remote control Note Other brands describe HDMI CEC functi
28. 1088 1920x1080i field rate 50 60Hz 1920x1080p 4 frame rate 25 30Hz 1280x720p frame rate 50 60Hz WMV9IVC1 1920x1088 30p 60i AACIHE AAC v1 amp v2 Doby Digtal Dobby Digital Plus WMA WMA PRO Supported audio video formats File Extensions MPEG 4 ASP 1920x1088 25p 30p 50i 60i Container H264 Video codec 1920x1088 Maximum resolution Max Frame Rate ps MPEG 1 L1 amp L2 MPEG 1225 Li AACIHEAAC 18 Doby Digital Doby Digital Plus WMA WMA PRO YouTube MPEG 2 1920x1088 25p 30p 50i 60i MPEG 4 ASP 1920x1088 25p 30p 50i 60i WMVINCI 1920x1088 30p 60i MPEG 1 L182 MPEG 1225 13 AACIHE AAC V1 v2 Dobby Digital Plus Dobby Digital WMA WMA PRO MPEG 4 ASP 1920x1088 25p 30p 50i 60i Divx 3 11 1920x1088 30p 60i MPEG 1 L112 MPEG MPEG 1 LI amp L2 MPEG 1 2 25 L3 AACIHE AAC 1892 Doby Digital Plus Doby Digital WMA WMA PRO VPS 1920x1088 Ogg Vorbis Contains FLY Supported audio video formats MPEG 4 ASP 1920x1088 25p 30p 501 601 Divx 3 11 1920x1088 30p 60i MPEG 1 L182 MPEG 1 2 25 L3 AACIHE AAC V18v2 Dobby Digital Plus Dobby Digital WMA WMA PRO z 7 3 Maximum Max Frame Rate Max Bit Rate i Media CE File Extensions Container Vi
29. N code in your router software to connect select WPS pin and note down the code e To enter the encryption key manually select Standard and enter the key when prompted Set secured connection with WPS encryption 1 To set the secured connection with a PIN code select the WPS pin and press OK 2 Write down the 8 digit PIN code shown on TV and enter it in the router software on your PC See the router manual for where to enter the PIN code Set secured connection with WPA encryption If your router has Wi Fi Protected Access WPA security enter the pass phrase with the remote control 1 To enter the encryption key manually select Standard and press OK 2 To access the onscreen keyboard select the text entry field then press OK Set secured connection with WEP encryption If your router has WEP security the TV asks for the WEP encryption key in hexadecimal numbers 1 Locate the hexadecimal key in the router software on your PC and make a note of of the first key in the WEP keys list 2 Enter the security key on the TV with the remote control to connect to the router 3 If prompted agree to the End User Licence Agreement Network settings TV network name If you have more than one TV in your home network you can rename this TV to give it a unique name 1 Press fft 2 Select Setup gt Network settings gt TV network name then press OK 3 Use the onscreen keyboard or the re
30. OK 3 Select a level EN 13 English Switch TV channels ae i CH CH a ei a e Press CH on the remote control or TV e Press the Numeric buttons on the remote control to enter a channel number Manage favourite channels You can view all channels or only a list of your favourite channels Create a list of your favourite channels 1 Press LIST The channel list is displayed 2 Select the channel to mark as favourite then press Ht OPTIONS 3 Select Add remove favourites then press OK The selected channel is marked with an asterisk To remove a channel from the favourites list select Add remove favourites then press OK Display your list of favourite channels 1 Press LIST then press ttt OPTIONS 2 Select List gt Favourites to display channels in the favourite list 3 Press OK to confirm EN 14 Manage channel lists After the channels are installed you can Filter channels e Switch between antenna and cable channels Rename channels Reorder channels Lock a channel e listen to digital radio Filter channels 1 While you watch TV press LIST 2 Press tff OPTIONS then select Filter 3 Select an option then press OK e Digital Analogue Display all channels in the channels list e Digital TV channels Display only digital channels e Analogue Channels Display only analogue channels e Free
31. Press ff 2 Select Recordings then press OK A list of recordings is displayed 3 Press Ht OPTIONS 4 Select an option to sort by name date expiry date or type then press OK Note e If a broadcaster limits the number of days that a recording can be viewed after the programme has been broadcast the list of recordings shows he number of days before the recording expires e l farecording has expired or if a broadcaster restricts playback the recording cannot be played e l fascheduled recording is prevented by he broadcaster or if the recording does not occur as per schedule it is marked as Failed in the recordings list Delete recordings You can view a list of all recordings and the remaining USB hard disk space To free up disk space delete recordings 1 Press ff 2 Select Recordings then press OK A list of recordings is displayed 3 Select the recording then select Remove EN 29 English Use Skype What you can do e Talk to anyone else on Skype anywhere in the world for free e Make low cost calls to phones and mobiles A Skype subscription is required Visit www skype com e Participate in conference calls e Sendand receive voicemails e Forward a call e Manage your online status mood message and profile information o a Note e No emergency calls with Skype Skype is not a replacement for your telephone and cannot be used for emergency calls
32. Register your product and get support at www philips com welcome 46PFL4908 46PFL4908 46PFL4908 46PFL4908T 55PFL4908 55PFL4908 55PFL4908T EN User Manual PHILIPS Contents EN 1 Important 3 Safety 3 Care 5 Legal 6 Sustainability 8 Help and support 10 2 Use your TV 11 TV controls 11 Watch TV 13 View programme guide 16 Watch 3D 18 Play multimedia files 19 Smart TV 22 nteractive TV 24 3 Use more of your TV 26 Pause TV 26 Record TV shows 27 Use Skype 30 Play games 33 View Text 34 Set locks and timers 35 4 Change your TV settings 37 Picture and sound 37 Channels 39 Satellite settings 41 Language settings 43 Universal access settings 44 Other settings 45 Update software 45 Reset all 46 5 Connect your TV 47 About cables 47 Connect antenna 48 Connect devices 48 Connect more devices 55 Watch connected devices 58 Set up EasyLink devices 58 Connect to a network and the Intemet 61 Connect a CAM Conditional Access Module 64 Troubleshooting 65 General issues 65 Channel issues 66 Picture issues 66 Sound issues 67 Connection issues 67 etwork issues 68 Contact Philips 68 Specifications 69 Power and reception 69 Display and sound 69 Display resolutions 69 ultimedia 70 Connectivity 72 Help version 72 Index 73 1 Important Safety Precautions Read and understand all instructions before you use your TV If damage is caused by
33. S 7 Select Exit reorder then press OK Note The reordering options may vary according to your broadcaster Lock a channel You can prevent unauthorised access to channels by locking them 1 While you watch TV press LIST The channel list is displayed 2 Select the channel to lock then press tt OPTIONS 3 Select Lock channel then press OK 4 If prompted enter the PIN code The channel is marked with a lock icon in the channel list Tip To watch a locked channel enter the PIN code when prompted Listen to digital radio If digital radio channels are available you can listen to them They are installed automatically when you install the TV channels 1 While you watch TV press LIST The channel list is displayed 2 Press Ht OPTIONS 3 Select Filter gt Radio then press OK 4 Select a radio channel then press OK Watch connected devices Before you can watch a device connect the device to the TV See Connect your TV gt Connect devices Page 48 Select a device with SOURCE 1 Press SOURCE 2 Select a device then press OK Select a device from the Home menu 1 Press ff 2 Select Source then press OK 3 Select the device then press OK To add or manage your connected devices see Connect your TV gt Watch connected devices gt Change device settings Page 58 Use picture and sound presets Your TV comes with predefined picture and sound set
34. TV switches to 2D Select 3D input format The TV detects when 3D is available and prompts you to put on your 3D glasses to start watching If the TV cannot detect the 3D signal due to a missing 3D signal tag it displays images that overlap To switch the overlapping images to 3D change the 3D format 1 Press Ht OPTIONS 2 Select Picture and sound gt 3D settings 3 Select a setting then press OK e 3D Side by side Select if the TV displays pictures that overlap vertically e 3D Top bottom Select if the TV displays pictures that overlap horizontally e 3D top bottom inverted or 3D side by side inverted Select if the TV displays distorted images such as the background appearing nearer to you Convert 2D to 3D You can convert any 2D programme to watch it in 3D 1 Press tff OPTIONS 2 Select Picture and sound gt 3D settings 7 2D to 3D conversion To adjust the 3D depth 1 Press tff OPTIONS 2 Select Picture and sound gt 3D effect 3 Select an option then press OK To switch off 2D to 3D conversion 1 Press tff OPTIONS 2 Select Picture and sound gt 3D settings gt 2D then press OK Note If you switch to another activity the conversion stops Play multimedia files What you can do You can play videos photos and music on your TV from e Your computer connected through the home network e A USB device connected to the TV
35. V placement wall possible mount or stand mount e Avoid stationary images as much as 1 Press f possible Stationary images are images 2 Select Setup then press OK hat remain onscreen for extended 3 Select TV settings gt General settings periods of time Stationary images or TV placement include onscreen menus black bars 4 Select On a TV stand or Wall ime displays etc If you must use mounted then press OK stationary images reduce screen English contrast and brightness to avoid screen Lock the TV damage Your TV is equipped with a Kensington 3D glasses security slot at the base of the TV To secure the TV purchase a Kensington anti theft lock For sets with 3D glasses supplied sold separately Follow these instructions to take care of your glasses e Use a clean soft cloth microfibre or cotton flannel to clean the lenses to avoid scratching them Never spray cleaner directly on the 3D glasses You can use pre moistened cleaning cloths from most well known lens manufacturers of sunglasses e Do not expose the 3D glasses to direct sunlight heat fire or water This may result in a product malfunction or fire e Do not drop bend cr apply force to he lenses of the 3D glasses e Do not use cleaning chemicals containing alcohol solvent surfactant or wax benzene thinner mosquito repellent or lubricant Using these chemicals can cause discolouration or cracks
36. Visually impaired 3 Select a setting then press OK e Speakers Hear visually impaired audio from speakers only e Headphones Hear visually impaired audio from headphones only e Speakers headphones Hear visually impaired audio from speakers as well as headphones e Off Switch off visually impaired audio Note If the EasyLink remote control is switched on you cannot select the Green button To switch off EasyLink see Connect your TV gt Set up EasyLink devices gt What you need Page 59 Change volume for visually impaired audio 1 While you watch TV press ttf OPTIONS 2 Select Universal access gt Mixed volume 3 Press the Navigation buttons to change the volume then press OK Audio effects 1 Press ft 2 Select Setup gt Channel settings or Satellite settings 3 Select Languages gt Visually impaired or Audio effects 4 Select a setting then press OK e On Enable audio effects in the visually impaired audio e Off Disable audio effects in the visually impaired audio Type of speech 1 Press ff 2 Select Setup gt Channel settings or Satellite settings 3 Select Languages gt Visually impaired or Speech 4 Select a setting then press OK e Descriptive Hear descriptive speech in the visually impaired audio e Subtitles Hear subtitles in the visually impaired audio Other settings TV demo
37. al camera to the TV with a USB cable 53 English Digital camcorder Connect the digital camcorder to the TV with an HDMI cable E Connect the digital camcorder to the TV with a component video cable Y Pb Pr and an audio L R cable EN 54 Connect more devices USB storage device N Connect the USB hard drive to the TV with a USB cable US Connect the USB flash drive with a USB cable to the TV EN 55 English Computer Connect the computer to the TV with an HDMI cable E Connect the computer to the TV with a DVI HDMI cable and an audio cable 1 m DVI VGA Video call camera Connect the Philips TV video camera PTA317 sold separately with a USB cable to the TV EN 56 Keyboard and mouse USB keyboard You can connect a USB keyboard to enter text such as device names on the TV or text for Smart TV apps USB mouse You can connect a USB mouse to navigate pages on the Internet and click on links Note e If you need extra USB connectors use a USB hub e You can also connect the USB mouse to a connected USB keyboard Connect the keyboard and mouse to the TV with a USB cable When the TV detects the keyboard you can e Tab Go to the next field select the keyboard layout and test your e Tab and Shift Go to the previous field selection If you have selected a Cyrillic or e Home Scroll to the top of the page Greek keyboard layout first you
38. annel update message If a channel update is performed a message is displayed at startup You can switch off this message 1 Press ff 2 Select Setup gt Channel settings or Satellite settings 3 Select Channel installation gt Channel update message 4 Select Off then press OK EN 40 Copy channels ATTENTION This feature is intended for dealers and service personnel You can copy channel lists from one Philips TV to another through a USB storage device You do not need to search for channels or install them again on the second TV The channel list file is small enough to fit on any USB storage device What you need Two Philips TVs that have these properties e The same country setting e The same year range e The same DVB type as indicated by the suffix H K T D 00 in the model name e The same settings for satellite channels including the number of LNB satellites e The same hardware type as indicated by the sticker on the back of the TV For example TPM10 1E LA e Compatible software versions Note If you are prompted to enter a code enter 8888 Step 1 Check the country setting 1 Switch on the first TV with the channels that you want to copy to the second TV 2 Press ff 3 Select Setup gt Search for channels gt Reinstall channels then press OK The country menu is displayed 4 Make a note of the current setting 5 Press D 6 Press Cancel t
39. ard 10 seconds press gt or 4 e o search forward or backwards press gt gt or dd Press the button repeatedly to toggle between different speeds e To stop the video press IM Video options While you play video press tff OPTIONS then press OK to select an option e Subtitles Select the available subtitle settings e Subtitle language Select the language for subtitles if available e Character set Select the correct character set for the subtitles e Audio language Select an audio language e Repeat Select Repeat to play the video file repeatedly or Play once to play the video file once e Media server When you play content from a media server you can select another media server e Shuffle on Shuffle off Enable or disable random play of video files e DivX amp VOD Display the DivX registration and deregistration codes for this TV Note To view information about a video for example played position duration title or date select the video then press G INFO To hide the information press i INFO again Listen to music 1 Select JI in the top bar 2 Select a track then press OK 3 Optional To play all the tracks in a folder select a track then select Play all e To skip to the next or previous track press CH or CH e o pause the track press OK Press OK again to resume playback e o skip forward or backward 10 seconds
40. atellite or digital TV receiver to the TV with an HDMI cable geom g Vs Connect the digital TV receiver to the TV with a component video cable Y Pb Pr and an audio UR cable p unm un nmn Ui nmn Ui Uy E EN 49 English Connect the digital TV receiver to the TV with a SCART cable Video recorder Connect the recorder to the TV with an antenna cable ia ar TV ANTENNA Connect the recorder to the TV with an HDMI cable os i t Er EN 50 Connect the recorder to the TV with a component video cable Y Pb Pr and an audio L R cable L d Connect the recorder to the TV with a SCART cable ug sar Game console Connect the game console to the TV with an HDMI cable English Connect the game console to the TV with a component video cable Y Pb Pr and an audio L R V cable E m p TE Home theatre Connect an HDMI ARC compliant home theatre to the TV with an HDMI cable f m j Connect the home theatre to the TV with an HDMI cable and a coaxial audio cable HL sA lial OBS uci JA 4 B t udio Out 1 N umm EMEN SEN EN 52 Connect the home theatre to the TV with a component video cable Y Pb Pr and an audio L R cable nd uE b uE nu Connect the home theatre to the TV with a SCART cable Digital camera Connect the digit
41. be used for emergency calls 90 Before you can make a call you will need to purchase Skype Credits or buy a Skype subscription on your computer For more information see Use more of your TV Use Skype gt Skype settings Page 33 EN 32 1 In the Skype menu select Call phones then press OK 2 Select Dial pad to access the on screen dial pad or enter the telephone number with the Numeric buttons 3 Once complete select Call then press OK to start the call 4 Optional To mute your microphone during your call press tff OPTIONS then select Mute 5 To end the voice call select End call then press OK Answer a call If you are signed in to Skype you are notified of incoming calls while watching TV 1 A message appears onscreen with the caller s name Select Answer then press OK To enable video select Answer with video then press OK 2 To decline select Decline then press OK Note If you accept a call while pausing or recording a TV programme or while watching rental films Skype will interrupt the activity going on e A paused TV programme is stopped and the programme storage is lost e Recording of a TV programme is stopped You will need to resume recording again after you finish the call e Playback of rental films is stopped To resume watching the rented film you need to go back to the video store or broadcast service Some video stores and services do not allo
42. c question e Chat online with Philips Consumer Care available in certain countries only Use the Philips connectivity guide An easy to use connectivity guide gives you guidance on how to connect your TV to other devices Visit http www connectivityguide philips com Search the TV forum Your question may have already been answered by the Philips TV community of users Visit www supportforum philips com Contact Philips You can contact Philips Consumer Care in your country for support The number is available in the leaflet accompanying this product or online at www philips com support Before you contact Philips write down the model and serial number of your TV You can find this information on the back of your TV or on the TV packaging EN 10 1 Standby indicator LED and remote 2 Use you r TV control sensor The standby LED indicates when your TV is in standby Point the remote control at the TV controls sensor Make sure that the line of sight between the remote control and the TV is not blocked Rear controls English Remote control Cr 2 T E 1 Standby Switch the TV on or to standby 2 Play buttons Control playback of multimedia files 3 amp SOURCE Watch a connected device 4 GUIDE View programme guide 1 Standby Switch the TV on or off 5 EXIT Exit from menus or TV functions 2 CH Switch to the next or previou
43. can also e End Scroll to the bottom of the page select a secondary Latin keyboard layout e Page Up Go to the previous page 1 Press fft Page Down Go to the next page 2 Select Setup gt TV settings gt General e Zoom in or out settings gt USB keyboard settings e Fit to the width of the page 3 Change the keyboard settings When the TV detects the mouse you can set the tracking speed 1 Press ft 2 Select Setup gt TV settings gt General settings gt Pointer mouse settings TV keys on your keyboard To make a text entry use the following keys e Enter Confirm an entry Backspace amp Delete a character before the cursor e Navigation keys Navigate within a text 3 Change the mouse settings field Use the USB mouse with your TV e Alt Shift Switch between keyboard e OK Left mouse button left click layouts if multiple keyboard layouts are e gt Back Right mouse button set right click e Scroll wheel to scroll up and down an Smart TV keys on your keyboard Internet page e Enter Confirm an entry Backspace Go to the previous page e Navigation keys Navigate between fields Note The USB mouse cannot navigate in the TV menus EN 57 English Watch connected devices Select a device Before you can watch a device connect the device to the TV See Connect your TV gt Connect devices Page 48 Select a device
44. channels 1 In the child lock menu select Channel lock 2 Enter the child lock code with the Numeric buttons 3 Select the channels to lock or unlock Restart the TV to activate the lock Note If you access the channels from the channel list you are prompted to enter your lock code Child lock To protect children from unsuitable TV programmes you can lock the TV or block age rated programmes Set or change the child lock code 1 Press ffr 2 Select Setup gt Channel settings or Satellite settings Child lock 3 Select Set code or Change code 4 Enter the code with the Numeric buttons Tip If you access the channels from the channel list you are prompted to enter your lock code If you forget your code enter 8888 to override any existing codes EN 36 Parental rating You can set your TV to display only programmes with age ratings lower than your child s age This restriction only applies to digital channels from broadcasters that rate their programmes according to age 1 Press ff 2 Select Setup gt Channel settings or Satellite settings 3 Select Child lock gt Parental rating You are prompted to enter the child lock code 4 Enter the child lock code with the Numeric buttons 5 Select an age rating then press OK All programmes above the selected age rating are blocked For information on child lock codes see Use more of your TV gt Set locks a
45. ct an HDMI CEC compliant device to the TV You can connect more than one HDMI CEC device See Connect your TV gt Connect devices Page 48 e Configure each HDMI CEC compliant device properly e Switch on EasyLink Switch on EasyLink 1 Press ff 2 Select Setup gt TV settings gt General settings gt EasyLink 3 Select EasyLink gt On then press OK Control devices If you connect multiple HDMI CEC devices that support this setting you can control all such devices through the TV remote control Note This is an advanced setting Devices that do not support this setting cannot respond to the TV remote control 1 Press ft 2 Select Setup gt TV settings gt General settings gt EasyLink gt EasyLink remote control 3 Select On or Off then press OK Tips e o switch back to TV control press fft then select Watch TV e To control another device press fft then select the device from the Home menu EasyLink buttons You can control HDMI CEC complian devices with the following buttons on the TV remote control e Ox Switch the TV and the connected device on or to standby e Play buttons Control video or music play e Numeric buttons Select a title chapter or track e OK Start pause or resume play on the connected device activate a selection or access the device menu e ft Display the TV Home menu Switch off connecting devices Y
46. d or not found e Make sure that the wireless network is not disturbed by microwave ovens DECT phones or other neighbouring Wi Fi devices e If the wireless network is not working try a wired network connection e Make sure that the firewalls in your network allow access to the TV wireless connection EN 68 Contact Philips Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty If are not able to resolve your problem refer to the frequently asked questions FAQs for this TV at www philips com support You can also consult and contribute to the Philips TV community at www supportforum philips com If you wish to speak to or email a Philips representative contact the Philips Consumer Care in your country You can find the contact details in the leaflet accompanying this TV or at www philips com support Note your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging 7 Specifications Power and reception Product specifications are subject to change without notice Power e Mains power AC 220 240 V 50 60 Hz e Standby power consumption lt 0 3 W e Ambient temperature 5 to 40 degree Celsius e For power consumption see the product specifications at www philips com support The power rating stated on the product typeplate is th
47. de to unlock the channel blocking feature child lock Enter 8888 You want to upgrade your TV software Visit www philips com support and download the latest software package for your TV Software installation instructions and release notes indicating what s been updated are also available at the site Full instructions on how to upgrade your TV software are also available at Change your TV settings gt Update software Page 45 EN 65 English Channel issues You want to install TV channels See Change your TV settings gt Automatic installation Page 39 for instructions on installing analogue or digital channels If you want to install satellite TV channels see Change your TV settings gt Satellite settings Page 41 No digital channels were found during the installation e See the technical specifications to make sure that your TV supports DVB T DVB C or DVB S in your country e Make sure that all cables are properly connected and that the correct network is selected Previously installed channels do not appear in the channel list Make sure that the correct channel list is selected You want to rearrange or reorder the channel list After channels have been installed they appear in the channel list For information about managing channel lists including rearranging channels see Watch TV gt Manage channel lists Page 14 Picture issues The TV is on but there is no picture or
48. deo codec ERAT 5 Mbps Audio codec Usa eve umen HTMLS YouTube MPEG 4ASP 1920x1088 25p 30p 501 601 30 Yes Yes No No No 3 25p 30p 50p 60p AACIHE AAC vi amp v2 B 3GP H264 1920x1088 ps 30 ney Yes Yes No No No H263 1920 x 1088 30p 30 Yes Yes No No No m QuickTime 30 Yes Yes No No No qt Supported audio formats i i Maximum Max Bit Rate i Media CE Fle Extensions Container Video codec Panem Frequency kH MEDS Audio codec Usa Meda SE HTL Youtube mp MP3 A 48 384 MPEG 1 2 2 5 L3 Yes Yes Yes Yes No WMA Mu E 48 192 WMA Yes Yes Yes Yes No v3 wma WMA Pro 96 768 WMA WMA Pro Yes Yes Yes Yes No Mm wen 192 768 LPCM No Yes No No No wav PC LPCM z 192 768 LPCM Yes Yes No No No aif mac LPCM 2 7 192 768 LPCM Yes Yes No No No aiff mac aac mp AAC 48 1024 AAC HE AAC v18v2 Yes Yes Yes Yes No ma Pls Playlists 4 i r Yes Yes No No No amu My ma Maa E 48 1024 AAC HE AAC v18v2 Yes Yes Yes Yes No EN 71 English Supported audio formats File Extensions Container Video codec Frequency kHz Max Bit Rate Audio codec YouTube AMR NB Smart TV only Supported subtitle formats Substation alpha V4 Advanced substation alpha V4 sub E ssa as DVB SAMI smi sami XSUB XSUB avi div
49. e his TV comes with Skype pre installed on it and ready to use You do not need to install or download any files for using Skype Simply connect a Philips TV video camera to use Skype What you need e A Philips TV video camera PTA317 00 sold separately with built in microphone See Connect your TV gt Connect more devices gt Video call camera Page 56 e An Internet connection e A wired or wireless home network For network connection see Connect your TV gt Connect to a network and the Internet Page 61 e A Skype account You can create a Skype account on this TV or from your computer Tip If you have connected a USB keyboard to this TV you can enter text from your keyboard For keyboard connections see Connect your TV gt Connect more devices gt Keyboard and mouse Page 56 EN 30 Start Skype Sign in to your account 1 Press fft then select Skype 2 Enter your Skype Name and Password To enter text select each field and press OK to access the onscreen keyboard 3 Select Sign in then press OK The Skype menu is displayed Tip If you have forgotten your password start Skype on your computer Visit www skype com to retrieve your password Create an account If you do not have a Skype name and password you can create an account from your TV 1 Select Don t have a Skype Name then press OK 2 Read the Skype End User License Agreement Terms of Service and Privacy
50. e dangers of climbing on furniture to reach the TV Risk of swallowing batteries 3D health warning For 3D TVs only e Ifyou or your family have a history of epilepsy or photosensitive seizures consult a medical professional before exposing yourself to flashing light sources rapid image sequences or 3D viewing e lo avoid discomfort such as dizziness headache or disorientation we recommend not watching 3D for extended periods of time If you experience any discomfort stop watching 3D and do not immediately engage in any potentially hazardous activity for example driving a car until e he product remote control may your symptoms have di sappeared If Risk of overheating contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure that curtains or other objects never cover the ventilation slots on the TV Risk of injury fire or power cord damage Never place the TV or any objects on the power cord Disconnect the TV from the socket and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable Risk of hearing damage Low temperatures EN Avoid using earphones or headphones at high volumes or for prolonged periods of time If the TV i
51. e power consumption for this product during normal household use IEC 62087 Ed 2 The maximum power rating stated between brackets is used for electrical safety IEC 60065 Ed 7 2 Reception e Antenna input 75 ohm coaxial IEC75 e V system DVB COFDM 2K 8 K e Video playback NTSC PAL SECAM e Digital TV MPEG 4 DVB T Terrestrial DVB T2 DVB C Cable DVB S S2 Satellite e Tuner bands VHF UHF S Channel yperband Available on certain models only Display and sound Picture Display e Display type LED backlight Full HD e Diagonal size 117 cm 46 inches 140 cm 55 inches e Aspect ratio 16 9 widescreen e Panel resolution 1920x1080p e Picture enhancement Pixel Plus e Perfect Motion Rate PMR 200 Hz e 3D 3D Easy Sound e Output power RMS 10 THD 20 W e Clear Sound e Incredible Surround e Mono Stereo Secondary audio programming Display resolutions Computer formats HDMI Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1280 X 720 60 Hz 1280 X 768 60 Hz 1280 x 1024 60 Hz 1360 x 768 60 Hz 1680 x 1050 60 Hz 1920 x 1080 60 Hz Computer formats VGA Resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1280 x 1024 60 Hz 1360 x 768 60 Hz 1600 x 1200 60 Hz 1920 x 1080 60 Video for
52. e upgrade as soon as power is restored e If an error occurs during the upgrade retry the upgrade from the beginning If he error reoccurs contact Philips Consumer Care 1 Remove all USB devices such as a Wi Fi adapter from the TV then switch on the TV 2 Connect the USB flash drive to the TV The software upgrade starts automatically The upgrade is complete when a notification message appears on screen 3 Before you restart the TV disconnect the USB flash drive from the TV 4 Press on the remote control do not press more than once The TV switches off then back on again The upgrade is complete 5 To prevent accidental updates to the TV software reconnect the USB flash drive to your computer and delete autorun upg Update from digital broadcast When available the TV can receive software updates through digital broadcasts When a software update is received you are prompted to update the software We strongly recommend that you update the software when prompted Follow the onscreen instructions If you do not update the TV software when the update is received you are prompted to save the update file To update the software later 1 Press ff 2 Select Setup gt Software settings gt Local updates 3 Select the file that you downloaded and follow the onscreen instructions to complete the update EN 46 Update from the Internet
53. eception of an analogue TV channel is poor you can fine tune the TV channel 1 Press ff 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual installation gt Fine tune then press OK 4 Press amp or W to fine tune the channel 5 When you have selected the correct channel frequency select Done then press OK 6 Select an option then press OK e Store current channel Store the channel under the current channel number e Store as new channel Store the channel under a new channel number Switch off automatic updates In the Channel installation menu select Automatic channel update gt Off Update channels manually 1 Press ff 2 Select Setup gt Search for channels gt Update channels then press OK 3 Follow the onscreen instructions to update the channels Update channel list When the TV was switched on for the first time a full installation of channels was performed By default when there are changes to these channel lists the TV updates them automatically You can also switch off the automatic update or manually update the channels Note If you are prompted to enter a code enter 8888 Automatic update To add or remove digital channels automatically leave the TV in standby mode The TV updates channels and stores new channels everyday Empty channels are removed from the channel list Switch off the ch
54. ection see Connect your TV gt Connect to a network and the Internet Page 61 Access interactive TV You can identify channels that offer interactive services by a message that invites you to press the Red button or OK to access an interactive programme 1 Switch to a digital channel with interactive services Whi sym has ZAP the bol is d loaded interac le the application is loading a blinking isplayed When the application an icon is displayed ress the Red button or OK to launch ive application 3 Follow the onscreen instructions and use you r remo inte ractive e control to navigate the pages EN 25 English 3 Use more of your TV Pause TV What you can do While you watch a digital channel you can pause a programme to answer a phone call or to have a break The broadcast is stored on a USB hard drive that is connected to the TV You can resume playback of the programme at any time Note e You can pause a programme for a maximum of 90 minutes What you need e Tune your TV to receive digital channels See Change your TV settings gt Channels gt Automatic installation Page 39 e Connect a USB 2 0 compatible hard drive with a minimum capacity of 4 GB and a minimum transfer speed of 30 megabits per second For optimal performance use a hard drive with 32 GB of disk space Install USB hard drive To pause TV you must connect a
55. elect Connection type 3 Select a setting then press OK e 1 satellite Single LNB Select if you have only one LNB e 2satellites DiSEqC Mini Select if you have 2 LNBs EN 41 English e 3 or 4 satellites DiSEqC 1 0 Select for 3 or 4 LNBs e Unicable for 1 satellite Select if you have a Unicable setup with 1 satellite e Unicable for 2 satellites Select if you have a Unicable setup with 2 satellite Manual installation If a transponder is skipped during installation you can test the signal strength of a transponder or add a new transponder 1 While you watch TV press fft 2 Select Setup gt Search for satellite gt Manual installation then press OK 3 Select the LNB 4 If you know the frequency of the transponder which can include several channels select Frequency and set the frequency 5 Select Search then press OK 6 If a new frequency is found press Store to add the new transponder with its channels Update satellite channels 1 While you watch TV press fft 2 Select Setup gt Search for satellite gt Update channels 3 Follow the onscreen instructions to complete the installation 4 Once complete select Finish and then press OK EN 42 Add and remove satellites You can add or remove satellites at any time and install channels from new satellites Note Before you add satellites make sure that the connection type is correc
56. elect Reset then press OK All TV settings except for channel settings are reset to the default factory settings Channels Automatic installation When the TV was switched on for the first time a full installation of channels was performed To change your language country and reinstall all available TV channels you can run this full installation again Start installation Note If you are prompted to enter a code enter 8888 1 Press ff 2 Select Setup gt Search for channels gt Reinstall channels then press OK 3 Select your country then press OK 4 Select your network then press OK e Antenna DVB T Access free to air antenna transmissions e Cable DVB C Access cable transmissions 5 Follow the onscreen instructions to select other options if any The start menu for channel search is displayed 6 Select Start then press OK 7 Once the channel search is complete select Finish then press OK Tip Press LIST to see the channel list Note When digital TV channels are found the list of installed channels may display empty channel numbers You can rename or reorder these channels Install analogue channels You can search and store analogue TV channels one by one Step 1 Select your system Note Skip this step if your system settings are correct 1 While you watch TV press fft 2 Select Setup gt Channel settings gt Channel installatio
57. ength HDMI 1 ARC Enable audio output from the ARC compliant device connected to the HDMI 1 connector Audio out delay Automatically sync the image on the TV to the audio from a connected home theatre You do not need to use this setting when connecting the TV to a Philips home theatre Audio out offset Adjust the setting for audio output delay Available if Audio out delay is switched on Audio format Digital channels If a digital TV channel broadcaster streams audio in multiple formats you can select an audio format 1 Press ft 2 Select Setup gt Channel settings or Satellite settings gt Languages gt Preferred audio format 3 Select an option then press OK e Standard Receive standard audio format MPEG e Advanced Receive advanced audio formats if available AAC Dolby Digital or Dolby Digital Plus Analogue channels If an analogue TV channel broadcaster streams stereo audio in multiple formats you can select an audio format 1 Press ft 2 Select Setup gt Channel settings or Satellite settings gt Mono Stereo 3 Select a setting then press OK Reset picture and sound You can restore the default picture and sound settings while the channel installation settings remain the same 1 While you watch TV press fft 2 Select Setup gt TV settings gt General settings gt Factory settings then press OK 3 S
58. es by album name artist or other fields e Toclear the list of offline media servers press tlf OPTIONS then select Clear offline servers and press OK Play files from USB device If you have photos videos or music files on a USB storage device you can play the files on TV Caution e P Vision is not responsible if the USB hard drive is not supported nor is it responsible for damage to or loss of data in the device e Do not overload the USB port If you connect a USB storage device that consumes more than 500mA power make sure that it is connected to its own extemal power supply Browse USB device 1 Connect the USB device to the USB connector on the TV 2 Press amp SOURCE select USB then press OK 3 Select a file from the content browser then press OK to start play 4 Press the Play buttons to control play 5 Optional To select a different USB device select USB device at the bottom of the TV screen Tips e Select the top bar to filter your files by type e Select Sort to arrange the files by name date or other fields EN 20 Play options Watch video 1 Select EB in the top bar 2 Select a video then press OK 3 Optional To play all the videos in a folder select a video then select Play all e o skip to the next or previous video press CH or CH e o pause the video press OK Press OK again to resume playback e o skip forward or backw
59. ess OK 2 Select the contact then press ttt OPTIONS 3 Select Block then press OK When prompted select Yes then press OK Unblock a contact 1 In the Skype menu select Settings gt Blocked Contacts 2 Select the blocked contact then press OK 3 Follow the on screen instructions to unblock the contact Contact info To view the details of a contact select a contact The contact details are displayed on the right of the TV screen Contact history To view the calls which you have had with a contact select History To open previous conversations select a conversation and press OK Note When you sign in with another Skype account on this TV the history of your previous account is cleared Online status To see if a contact is online check the online status icon next to the contact Your online status is also shown on your contacts page To change your online status 1 In the Skype menu select your Skype name then press OK 2 Select Online Status then press OK 3 Select a status then press OK Make voice and video calls Make a voice call You can make a Skype call without video Note Make sure that a video camera is connected for voice calls too 1 In the Skype main menu select Contacts then press OK 2 Select the contact then press OK 3 Select Call then press OK Voice call options During a call press ttf OPTIONS to access these options
60. h a wired or wireless connection e For a wired connection see Connect your TV gt Connect to a network and the Internet gt Wired connection Page 61 u a e For a wireless connection see Connect your TV gt Connect to a network and the Internet gt Wi Fi integrated Page 62 Wired connection 1 Switch on the router and switch on its DHCP setting 2 Connect the router to the TV with an Ethernet cable 3 Press fft then select Setup 4 Select Connect to network then press OK 5 Follow the onscreen instructions to install the network 6 Wait for the TV to find the network connection 7 If you are prompted agree to the End User Licence Agreement EN 61 English WiFi integrated This section is only applicable for WiFi integrated TVs You can connect your TV to your home network wirelessly Note e The wireless network operates in the same 2 4 GHz frequency spectrum as common household devices such as Dect phones microwave ovens or Bluetooth devices which can cause WiFi interference Move these devices away from the TV e For optimum WiFi performance place he TV at a distance of less than 10 m from the wireless router Avoid obstructions such as concrete walls between the router and the TV e Reception quality depends on the ocation of the wireless router and your ocal Internet service provider e To reduce network traffic switch off unused network
61. h on the sensor press he Green button while you watch TV and select Light sensor e Low standby power The advanced power circuitry reduces the power consumption of the TV to an extremely ow level without losing the constant standby functionality e Auto switch off To conserve energy set the TV to switch off automatically after a period of inactivity While you watch TV press the Green button and select Auto switch off Then select the period after which the TV switches off e Switch off inactive devices Switch off connected EasyLink HDMI CEC Consumer Electronic Control compliant devices that are inactive While you watch TV press the Green button and select Inactive devices off e Power management An advanced power management helps save the energy consumed by this TV To view how your personalised TV settings affect the TV s relative power consumption press fit then select Setup gt Watch demos gt Active Control demo Recycling Your product is designed and manufactured with high quality materials and components which can be recycled and reused es When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products E Please act according to your local rules and do not dispose of your old products with
62. hange your TV settings gt Channels gt Automatic installation Page 39 e Connect a USB 2 0 compatible hard drive with a minimum capacity of 32 GB and a minimum transfer speed of 30 megabits per second For optimal performance use a hard drive with 250 GB of disk space You can use the same USB hard drive to record and pause TV shows Install USB hard drive To record TV shows you must connect a USB hard drive to the TV and format it If the TV does not recognise the USB hard drive use a PC to format it to NTFS or FAT32 system then try again Caution e P Vision is not responsible if the USB hard drive is not supported nor is it responsible for damage to or loss of data in the device e Formatting removes all data from the connected USB hard drive e he USB hard drive is formatted exclusively for this TV Keep it permanently connected to the TV You cannot access the contents of the USB hard drive from another TV or PC EN 27 English e Do not overload the USB port If you connect a USB hard dri consumes more than 5 ve device that O0mA power make sure that it is connected to its own extemal power supply Note e Make sure that the TV and the USB hard drive are switched off e While you are formatti ng the USB hard drive do not connect other USB devices to the TV Start recording Ce e One touch recording You can record the programme you are currently watching wi
63. he United States and other countries K Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world dina CERTIFIED DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living etwork Alliance DIVX DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under licence DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Corporation This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration ex Skype is a trademark of Skype Limited or its related companies EN 7 English PlayReady Final Products Content owners use Microsoft PlayReady con con con shou con you con ent access technology to protect thei
64. imum Max Frame Rate Max Bit Rate resolution fps Mbps Audio codec YouTube File Extensions Container Video codec MPEG 2 1920x1088 25p 30p 50i 60i 30 MPEG 4ASP 1920x1088 25p 30p 50i 60i 30 H264 1920x1088 25P 30p 50m 60p 30 i 1920x1080i MPEG 1 L1 amp L2 MPEG field rate 50 pue Dobby Digital Plus 1920x1080p Dolby Pulse frame rate m 24 25 30Hz 4280x720p frame rate 50 60Hz 1920x1088 25p 30p 501 60i MPEG 1 L1 amp L2 MPEG 4920x1088 25p 30p 501 601 1225 L AACIHE AAC 4 Dob Di 25p 30p 50p 604 digital Plus 1920x1088 pu Sop Ses Dobby Pulse Supported audio video formats File Extensions Container Video codec Primam Audio codec YouTube resolution fps 1920x1080i field rate 50 60Hz 1920x1080p MPEG 1 L1 amp L2 MPEG 1 2 25 L3 AACIHE AAC 7182 Doby Digital Dobby Digital Plus 1280x720p frame rate 50 Doby Puse 60Hz PRA 25p30p E 60p 1920x1088 5P30P 0P 60p 192010801 field rate 50 ism Manifest 60Hz BACE AE A20 mpd 1920x1080p Dolby Digital Plus frame rate m 24 PRO pact WMA WMA PRO 1280x720p frame rate 50 60Hz EN 70 Supported audio video formats File Extensions Container Video codec Maximum resolution Max Frame Rate fps MPEG 4 ASP 1920x1088 25p 30p 50i 601 H264 1920x
65. ition from one photo to the next e Media server When you play content from a media server you can select another media server EN 21 English Play DivX VOD Video On Demand This TV is DivX Certified R and plays To play DivX VOD videos from a video store or from your computer you must first activate DivX VOD on the TV The DivX VOD activation of your TV is free of charge Register the TV If the TV is not yet activated when you start the playback of a rental DivX video the TV displays the DivX registration code to activate this TV To register follow these steps 1 When the TV displays the 8 or 10 digit registration code write down the code and go to http vod divx com 2 Download the DivX player software on your computer and install the software 3 Start the DivX player software and create a DivX Account Click VOD gt Create a DivX Account 4 In the DivX player register the TV with the registration code of the TV Click VOD 7 Register a DivX Certified Device 5 When prompted download and save the registration video to a USB flash drive or your connected media server 6 Go to your TV and play the registration video on your TV This completes the registration and activates DivX on your TV Consult the DivX website for detailed support To de register this TV 1 Press amp SOURCE 2 Select Browse USB then press OK 3 Press Ht OPTIONS select DivX amp VOD then press OK
66. mats Resolution refresh rate 480i 60 Hz 480p 60 Hz 576i 50 Hz 576p 50 Hz 720p 50Hz 60 Hz 1080i 50Hz 60 Hz 1080p 24Hz 25Hz 30Hz 50Hz 60 Hz EN 69 English Supported image files Multimedia a e fies Aa e GIF 87a 89a gif e PNG png e BMP bmp dib e JPS jps e PNS pns e BMS bms Note Multimedia file names must not exceed 128 characters Supported multimedia connections e USB Connect only those USB devices that consume 500 mA of power or less NTFS FAT 16 Read only FAT 32 e Ethemet LAN RJ 5 Supported audio video formats Maximum Max Frame Rate Max Bit Rate File Extensions Container Videocodec Moon ps Mbps YouTube MPEG 1 1920x1088 25p 30p 50i 60i 30 No MPEG 2 1920x1088 25p 30p 50i 60i 30 MPEG 1 L1 amp L2 MPEG 1 2 2 5 L3 MPEG 4ASP 1920x1088 25p 30p 501 601 30 AACIHE AAC v1 amp v2 DVD PCM Doby Digital H264 1920x1088 25P 30p 50p 60p 30 MPEG 2 1920x1088 25p 30p 50i 60i 30 MPEG 4ASP 1920x1088 25p 30p 50i 60i 30 H264 1920x1088 25P 30P 50 60 a 1920x10801 MPEG 1 L1 amp L2 MPEG field rate 50 1 2 25 L3 AACIHE AAC 60Hz 182 Doby Digital Doby Digital Plus 1920x1080p Dolby Pulse frame rate 24 25 30Hz 1280x720p frame rate 50 60Hz Supported audio video formats Max
67. mote control keypad to enter the name Switch on Miracast This TV is a Miracast certified TV To seamlessly display content from a Wi Fi device on your TV switch on Miracast Note Miracast only works with certain mobile devices 1 Press ft 2 Select Setup gt Network settings gt Wi Fi Miracast 3 Select On then press OK to enable Miracast Tip To clear the history of all Wi Fi Miracast devices select Setup gt Network settings gt Clear Wi Fi Miracast devices Switch on remote recording This TV supports remote recording scheduled from a Wi Fi device Note If you switch on remote recording the TV consumes more power in standby 1 Press ft 2 Select Setup gt Network settings gt MyRemote Recording 3 Select On then press OK EN 63 English Connect a CAM Conditional Access Module What you can do You can watch scrambled digital TV channels with a Conditional Access Module CAM Once you have inserted the CAM and paid the subscription fees you can watch the programmes This TV supports Cl Common Interface as well as CI CI supports premium HD digital programmes with a high level of copy protection Note The applications functions content and onscreen messages depend on the CAM service provider What you need Caution To protect the CAM from damage insert the CAM as instructed Note Refer to the documentation from your service operator on how
68. n 3 Select Analogue Manual installation gt System then press OK 4 Select the system for your country or region then press OK Step 2 Search and store new TV channels 1 While you watch TV press fft 2 Select Setup gt Channel settings gt Channel installation 3 Select Analogue Manual installation gt Search channel then press OK 4 Find the channel e fyou know the channel frequency enter it with the Navigation buttons or Numeric buttons e l fyou do not know the channel frequency search for the next frequency that has a strong signal Select Search then press OK 5 After you have found the correct channel select Done then press OK 6 Select Store as new channel then press OK to store the new TV channel Note If the reception is poor reposition your antenna and repeat the procedure Install digital channels If you know the channel frequency of the channels you want to install you can search and store digital channels one by one For best results contact the service provider 1 Press ft 2 Select Setup gt Channel settings gt Channel installation 3 Select Digital Reception test gt Search channel then press OK 4 Press the Numeric buttons to enter the channel frequency 5 Select Search then press OK 6 When the channel is found select Store then press OK EN 39 English Fine tune analogue channels If the r
69. n buttons to skip to the word or number to search 3 Press OK to begin the search 4 To exit the search press A until no word or number is highlighted Digital text If a digital TV channel s broadcaster offers dedicated digital text or interactive services you can view digital text Channels such as BBC1 may have digital text with more interactive features Note Digital text services are blocked when subtitles are broadcast and switched on See Change your TV settings gt Language settings gt Subtitles on digital channels Page 43 When in digital text e Press the Navigation buttons to select or highlight items e Press the Colour buttons to select an option then press OK to confirm or activate Clock You can display a clock on the TV The clock displays the time that is broadcast by your TV service operator Display the TV clock 1 While you watch TV press tt OPTIONS 2 Select Clock then press OK The clock is displayed on the top right hand corner of the TV screen Change the clock mode You can change the clock mode to automatic or manual By default it is set to automatic mode which automatically synchronises it to Coordinated Universal Time UTC If your TV cannot receive UTC transmissions change the clock mode to Manual 1 While you watch TV press fft 2 Select Setup gt TV settings gt General settings 3 Select Clock gt Auto clock mode 4 Select
70. nd subtitle features for people who are hearing or visually impaired You can switch these features on or off 1 Press ff 2 Select Setup gt TV settings gt General settings 3 Select Universal access gt On or Off then press OK Set audio feedback When you press a button on the remote control or TV you can set the TV to play a beep 1 While you watch TV press tff OPTIONS 2 Select Universal access gt Key beep gt On then press OK Hearing impaired access To make sure that a hearing impaired audio language is available press tff OPTIONS then select Audio language Languages that support hearing impaired audio are indicated with an ear shaped icon Switch on hearing impaired audio and subtitles 1 While you watch TV press tff OPTIONS 2 Select Universal access gt Hearing impaired 3 Select a setting then press OK e Off Switch off hearing impaired features e On Switch on hearing impaired audio and subtitles Visually impaired access To make sure that a hearing impaired audio language is available press tf OPTIONS then select Audio language Languages that support visually impaired audio are indicated with an eye shaped icon EN 44 Select speakers or headphones You can choose to hear the visually impaired audio through the TV speakers headphones or both 1 While you watch TV press tff OPTIONS 2 Select Universal access gt
71. nd timers gt Child lock Page 36 4 Change your TV settings Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant which demonstrates the effect of your chosen setting immediately 1 While you watch TV press fft 2 Select Setup gt Quick picture and sound settings then press OK 3 Select Continue then press OK 4 Follow the onscreen instructions to choose your preferred settings More picture settings You can change the settings in the Picture menu 1 Press ff 2 Select Setup gt TV settings gt Picture then press OK 3 Select a setting to change then press OK e Picture style Select a predefined picture setting e Restore style Restore the last selected predefined picture setting e 3D backlight contrast Backlight contrast Adjust the brightness of the display backlight e Colour Adjust the colour saturation of the picture e Sharpness Adjust the sharpness of the picture e Noise reduction Select the amount of noise reduction for the picture e MPEG artifact reduction Smoothen transitions and haziness in the digital picture Pixel Plus HD Pixel Precise HD Fine tune each pixel to match surrounding pixels and produce a brilliant high definition image Advanced sharpness Enable superior sharpness especially on lines and contours in the picture Dynamic contras
72. o exit Step 2 Copy channel list to USB 1 Connect a USB storage device to the first TV with the channels installed on it 2 Press fft 3 Select Setup gt Channel settings or Satellite settings 4 Select Channel installation gt Copy channel list gt Copy to USB then press OK The channel list is copied to the USB storage device 5 Disconnect the USB storage device Step 3 Copy channels to a TV with no channels installed 1 Switch on the second TV on which you want to copy the channel list Initial installation starts 2 Follow the onscreen instructions and select the same country as the T V whose channel list you want to copy 3 Skip the search for channels 4 Connect the USB storage device 5 Press fft 6 Select Setup gt Channel settings or Satellite settings 7 Select Channel installation gt Copy channel list gt Copy to TV then press OK The channel list is copied to the TV storage device 8 Disconnect the USB storage device Step 3 Copy channels to a TV with pre installed channels 1 Switch on the second TV on which you want to copy the channel list 2 Press fft 3 Select Setup gt Search for channels gt Reinstall channels then press OK The country menu is displayed 4 Make sure that the country setting is the same as for the first TV 5 Press D 6 Press Cancel to exit 7 If the country setting is different reinstall
73. ols 11 EN 73 English D demo 45 devices watch 58 digital camcorder 54 digital camera 53 digital channels install 39 digital channels subtitles 43 digital radio 14 disc player connect 48 display resolutions 69 display specifications 69 DivX VOD 22 DLNA 19 DTVi 24 E EasyLink 58 EasyLink controls 59 EasyLink enable 59 EasyLink features 58 EasyLink onscreen control 12 EasyLink remote control 59 EasyLink TV speakers 60 Energy label 9 energy efficient settings 8 EPG 16 EPG broadcaster 16 EPG Internet 17 external hard disk 55 F favourite channels list 14 G game console connect 51 game settings 34 games two player 33 EN 74 H bbTV 24 DMI 47 DMI ARC 47 hearing impaired access 44 help onscreen 10 Help version 72 home mode 45 home network 61 home theatre connect 52 install channels automatic 39 Interactive TV 24 Internet connect 61 Internet Smart TV 22 K Kensington lock 5 key beep 44 L language menu 43 language subtitles 43 lock TV 5 M media server program 19 mode home or shop 45 Multimedia Home Platform MHP 24 multimedia play files 19 multimedia play options 20 multimedia supported formats 70 N network settings 63 network connect 61 network TV name 63
74. omplete Pause a live TV broadcast 07 24 T 0831 On a digital channel press Il to pause a TV programme 2 Press PB to continue watching The status bar shows the following time indicators A When the programme was paused for the first time B Where the paused programme is currently playing C Where the live programme is currently broadcast e o watch the stored broadcast press 4 or PP to search backward or forward e To change playback speed press or PP repeatedly e o watch the live TV broadcast press E Note If a recording is in progress you cannot pause the TV broadcast The stored broadcast on the USB hard drive is deleted if you e Disconnect the USB hard drive e Start recording a TV programme e Access Smart TV e Switch the TV to standby e Switch to another channel e Switch source to watch from a connected device such as a Blu ray disc player or digital receiver Record TV shows What you can do If your TV can receive programme guides you can record TV programmes onto a USB hard drive You can record both current TV programmes as well as future TV programmes Note e Recording is only supported in countries with programme guides e In Nordic countries the TV provides limited support for subtitles while recording TV programmes What you need e Tune your TV to receive digital TV channels such as DVB broadcasts See C
75. onality differently Some examples are Anynet Samsung Aquos Link Sharp or BRAVIA Sync Sony Not all brands are fully compatible with Philips EasyLink K After you have switched on Philips EasyLink he following features are available One touch play When you play an HDMI CEC compliant device the TV switches on from standby and switches to the correct source One touch standby When you press on the TV remote control the TV and all HDMI CEC compliant devices switch to standby mode Auto switch off inactive devices If a HDMI CEC compliant device has been inactive for some time it switches to standby mode EasyLink remote control You can control multiple HDMI CEC compliant devices with your TV remote control System audio control If you connect an HDMI CEC compliant device that includes speakers through the HDMI ARC connector you can choose to hear the TV audio from those speakers instead of the TV speakers Retain picture quality If your TV picture quality is affected by the picture processing features of other devices you can switch on Pixel Plus Link to retain picture quality Maximise display for subtitled video Some video subtitles can create a separate subtitle bar under the video which limits the video display area To maximise the video display area you can switch on auto subtitle shift and display the subtitles on the video image What you need e Conne
76. ontrol to enter a web address Zoom page To zoom in and out on an Internet page do the following 1 Press Ht OPTIONS then select Zoom 2 Use the slider bar to set the enlargement 3 Use the Navigation buttons to jump between highlighted items and scroll through an Internet page Scroll pages Press the Navigation buttons A and W to scroll up and down on a web page Reload page f a page does not load correctly press ttt OPTIONS then select Reload Page EN 23 English View security info To view security information about a page press ttf OPTIONS then select Security info Interactive TV Smart TV options Clear Smart TV memory You can clear the Smart TV memory completely including your favourites parental control code passwords cookies and history Warning This option resets the Smart TV memory completely It also deletes the settings of other interactive applications such as DTVi Digital TV interactive 1 Press ff 2 Select Setup gt Network settings 3 Select Clear Internet memory then press OK Rent online videos What you need Make sure that your TV is connected to the Internet through a high speed broadband connection See Connect your TV gt Connect to a network and the Internet Page 61 Access a video store 1 Press SMART TV 2 Access the App Gallery to search for available video store apps in your country 3 Select a store then pres
77. ou can also set the TV to switch off the connecting HDMI CEC compliant devices if they are not the active source The TV switches the connecting device to standby after 10 minutes of inactivity 1 Press fft 2 Select Setup gt TV settings gt General settings gt EasyLink 3 Select Auto switch off devices gt On then press OK EN 59 English Select speaker output If a connected device is HDMI Audio Return Channel HDMI ARC compliant you can output TV audio through an HDMI cable Additional audio cables are not required Make sure you connect the device to the HDMI ARC connector on the TV See Connect your TV gt About cables gt HDMI Page 47 Switch on HDMI ARC 1 Press ff 2 Select Setup gt TV settings gt Sound gt Advanced gt HDMI 1 ARC 3 Select one of the following then press OK e On Hear the TV audio through the connected HDMI ARC compliant device e Off Hear the TV audio through the TV speakers or through a device connected through the digital audio out connector Note Make sure that all HDMI CEC settings are properly set up on the connected device Set up TV speakers 1 Press ff 2 Select Setup gt TV settings gt Sound gt Advanced gt TV speakers 3 Select an option then press OK e Off Switch off TV speakers e On Switch on TV speakers e EasyLink Switch off TV speakers and stream
78. ount to a wall that can support the combined weight of the TV and wall mount TP Vision Netherlands B V bears no responsibility for improper wall mounting that result in accident injury or damage e f you need to store the TV disassemble the stand from the TV ever lay the TV on its back with the stand installed e Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on he back of the TV Never connect the TV to the power outlet if the voltage is different e Parts of this product may be made of glass Handle with care to avoid injury and damage e Avoid force coming onto powe Ensure that the power plug is fu inserted into the power socket r plugs lly Loose power plugs can cause arcing or fire e When the TV is swivelled ensu no strain is exerted on the pow re that er cord Strain on the power cord can loosen connections and cause arcing EN 3 English Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children ever place the TV on a surface covered by a cloth or other material hat can be pulled away e Ensure that no part of the TV hangs over the edge of the surface e ever place the TV on tall furniture such as a bookcase without anchoring both the fumiture and TV to the wall or a suitable support e Educate children about th
79. our device has only composite or RCA connectors use a composite CVBS cable to connect the device to the CVBS Y connector on the TV Y Pb Pr Component video Y Pb Pr only transmits video For sound also connect to Audio Left Right e he Y Pb Pr connection can handle high definition HD TV signals e Match the Y Pb Pr connector colours to the cable plugs kek HDMI An HDMI connection has the best picture and sound quality e An HDMI cable combines video and audio signals Connect HDMI for high definition HD TV signals and to switch on EasyLink e An HDMI Audio Return Channel ARC connector allows output of TV audio to an HDMI ARC compliant device e Connect HDMI cables shorter than 5 meters 16 4 feet SCART A SCART connection combines video and audio signals SCART connectors can handle RGB video signals but cannot handle high definition HD TV signals kkk EN 47 English EN Connect antenna Connect the antenna to the TV 750 TV ANTENNA Yo Connect devices Blu ray or DVD disc player Connect the disc player to the TV with an HDMI cable E a aem yi Connect the disc player to the TV with a component video cable Y Pb Pr and an audio L R cable 48 TV receiver Connect the satellite or digital TV receiver to the TV with an antenna cable For certain models only Pss i poo amp Bc Connect the s
80. pe video call 31 kype voice call 31 ce tO CO cO CO cO CO CO CO CO kype voicemails 33 sleep timer 36 Smart TV 22 Smart TV apps 23 Smart TV browse 22 Smart TV network 61 Smart TV start 23 smartphone control 12 EN 75 English software check version 45 software digital update 46 software Internet update 46 software USB update 45 sound settings 38 sound settings reset 39 sound specifications 69 source select 15 source update 58 standby 13 standby LED 11 subtitles analog 43 subtitles digital 43 subtitles language 43 sustainability 8 switch TV on off 13 T eletext search 35 ext 2 5 34 ext digital text 35 ext dual screen 34 ext enlarge 34 ext language 35 ext subpages 35 ext Table Of Pages 34 rademarks and copyrights 7 TV controls 11 TV guide 16 TV guide broadcaster 16 TV guide Internet 17 TV receiver connect 49 TV speakers mute 13 EN 76 U universal access enable 44 universal access hearing impaired 44 universal access visually impaired 44 update source list 58 USB keyboard 57 USB mouse 57 USB play files 20 V video call camera 56 video store 24 visually impaired access 44 volume 13 W Wi Fi integrated setup 62 Y YouTube 22 YPbPr component video
81. press gt or 4 e lo search forward or backwards press PP or dd Press repeatedly to toggle between different speeds e To stop the music press BM Music options While you play music press Ht OPTIONS then press OK to select an option e Repeat Select Repeat to play a track or an album repeatedly or select Play once to play a track once e Media server When you play content from a media server you can select another media server e Shuffle on Shuffle off Enable or disable random play of tracks Note To view information about a song for example title artist or duration select the song then press G INFO To hide the information press i INFO again View photos 1 Select in the top bar 2 Select a photo thumbnail then pressOK Start a slideshow If there are multiple photos in a folder select a photo then select Slideshow e To skip to the next or previous video press CH or CH e To stop the slideshow or close the photo press LIST or IM Slideshow options While you play a slideshow press ttt OPTIONS then press OK to select an option e Shuffle off Shuffle on Enable or disable random display of pictures in the slideshow e Repeat Select Repeat to watch a slideshow repeatedly or Play once to watch once e Slideshow time Select the display time for each photo in the slideshow e Slideshow transitions Select the trans
82. press OK 8 Switch on the two player glasses press the player selection switch and then put them on See the user manual for the two player gaming glasses Tips To view game menus or scores press OK to switch viewing mode Game settings Picture setting for games You can optimise the TV display for gaming without picture lag 1 Press ff 2 Select Setup gt TV settings gt Picture then press OK 3 Select Game or computer gt Game Sound preset for games You can optimise sound effects for gaming 1 Press Ht OPTIONS 2 Select Picture and sound gt Sound style gt Game then press OK The TV is ready for gaming Note When your gaming session ends switch back to your usual sound setting EN 34 View Text Select a page While you watch channels that broadcast text you can view the text 1 Select a channel that broadcasts text then press TEXT 2 Select a page in one of the following ways e Enter the page number with the Numeric buttons e Press CH CH to view the next or previous page e Press the Colour buttons to select a colour coded item Text options 1 While you view text press Ht OPTIONS 2 Select an option e Freeze page Unfreeze page Freeze or unfreeze the current page e Dual screen Full screen Enable or disable dual screen text Dual screen displays both the current channel and he text broadcast on two halves of the TV sc
83. r intellectual property including copyrighted ent This device uses PlayReady echnology to access PlayReady protected ent and or WMDRM protected content f the device fails to properly enforce restrictions on content usage content owners may require Microsoft to revoke the device s ability to consume PlayReady protected content Revocation Id not affect unprotected content or ent protected by other content access echnologies Content owners may require o upgrade PlayReady to access their ent If you decline an upgrade you will not be able to access content that requires the upgrade All other registered and unregistered trademarks are the property of their respective owners EN Sustainability Energy efficiency This TV is designed with energy efficient features To access these features press the Green button on the remote control e Energy saving picture settings You can apply a combination of energy saving picture settings While you watch TV press the Green button and select Energy saving Then select the Energy saving picture setting e Screen off If you only want to listen to audio from the TV you can switch off the TV display Other functions continue to operate normally While you watch TV press the Green button and select Screen off e Light sensor When the surrounding ight darkens the built in ambient light sensor lowers the brightness of the TV screen To switc
84. re is a short delay before the TV responds Tip If you cannot find your remote control and want to switch on the TV from standby press any button the TV Switch TV to standby Press on the remote control The standby LED on the TV switches to red Switch off the TV Press on the TV The standby LED switches to off Note Though your TV consumes very little energy when it is in standby or switched off it does use some energy If you are not going to use the TV for an extended period of time disconnect the TV from the mains plug Automatic switch off You can save energy with this TV s energy efficiency settings which are enabled by default If there is no user interaction such as pressing a remote control button or a control on the TV for four hours the TV will automatically switch to standby To disable automatic switch off 1 While you watch TV press the Green button on the remote control 2 Select Auto switch off then press OK 3 Use the Navigation buttons to make a selection then press OK Adjust TV volume L c Increase or decrease the TV volume Press on the remote control Press lt on the TV Mute or restore the TV volume e Press 6x on the remote control to mute the volume e Press amp again to restore the volume Adjust headphone volume 1 Press fft 2 Select Setup gt TV settings gt Sound gt Headphone volume then press
85. reen e T O P overview Table Of Pages T O P text broadcasts allow you to jump from one subject to another without entering page numbers e Enlarge Normal view Zoom in on he page Press the Navigation buttons o move around the enlarged view e Reveal Hide or reveal hidden information on a page such as solutions o riddles or puzzles e Cycle subpages If subpages are available each is shown automatically e Language Switch to a different language group to correctly display different character sets e Text 2 5 View text with more colours and better graphics than normal text If Text 2 5 is broadcast by a channel it is switched on by default Text language For digital TV channels where the broadcasters provide different text languages you can select your preferred primary and secondary languages 1 Press ff 2 Select Setup gt Channel settings or Satellite settings 3 Select Languages gt Primary Text or Secondary Text 4 Select a language then press OK Set locks and timers Subpages If the text page contains several subpages you can view each subpage in succession These subpages are shown on a bar next to the main page number Press 4 or P to select them Search You can search for a word or number that exists on the current text page 1 While you are viewing text press OK to highlight the first word or number 2 Press the Navigatio
86. ressOK Access broadcaster programme guide 1 Press ff 2 Select TV guide then press OK 3 If you are viewing the programme guide for the first time follow the onscreen instructions to update the guide Customise broadcaster programme guide You can customise the displayed information to e Remind you when programmes start e Display only preferred channels e Change day of display e Schedule recordings of programmes See Use more of your TV Record TV shows gt Schedule recordings Page 28 Note Options may vary according to the programme information available from the broadcaster 1 In the programme guide press tt OPTIONS 2 Select an option then press OK e Acquire EPG data Update programme guide information e Change day Select the day to display programme guide e Search by genre Search programmes by genre e All reminders Display a list of all programme reminders From the Internet ake sure that your TV is connected to the nternet through a high speed broadband connection See Connect your TV gt Connect to a network and the Internet Page 61 Select Internet programme guide Before you use the programme guide check he following settings 1 Press fft 2 Select Setup gt TV settings gt General settings gt TV guide 3 Select From the Internet then press OK Access Internet programme guide 1 Press ffr 2 Select TV guide then press OK Note
87. rmation in Important gt Safety gt 3D health warning Page 4 To watch 3D on this TV use the Philips Easy 3D passive glasses supplied with your TV Note e If you need additional glasses purchase the Philips Easy 3D glasses PTA417 3D glasses from other brands may reduce or lose the 3D effect e Some 3D formats are not supported To experience the best 3D effect while you watch 3D programmes e Sitat a distance that is at least three times the width w of the TV screen Do not sit more than 6 m away EN 18 Start 3D Automatically enable 3D The TV detects when 3D is available and prompts you to put on your 3D glasses to start watching To set the TV response when a 3D signal is detected 1 Press ff 2 Select Setup gt TV settings gt 3D gt Switch to 3D 3 Select a setting then press OK e Automatic TV switches to 3D automatically e Notification only TV displays notification first e Never No notification Select a source with 3D For 3D discs 1 Play the disc on a 3D Blu ray disc player that is connected to the TV HDMI connector 2 Press amp SOURCE then select the 3D Blu ray disc player For 3D TV programmes 1 Select Watch TV then switch toa TV channel that broadcasts 3D content Note e o switch back to 2D press ttt OPTIONS Select Picture and sound gt 3D settings gt 2D e If you switch to another channel or a connected device the
88. rol You can also control connected HDMI CEC enabled devices through other buttons that are available through the on screen remote control Make sure that Easylink is switched on after connection Read more about Easylink in Connect your TV gt Set up Easylink devices gt Control devices Page 59 To access the on screen remote control 1 While you watch a connected device press ttf OPTIONS 2 Select Show remote control then press OK 3 Select an on screen button then press OK Smartphone control With the smartphone application Philips MyRemote you can use your smartphone as a secondary remote and even as a keyboard You can also watch a slideshow of the images in your smartphone on the TV Note Make sure that your TV and smartphone are connected to the same local network For more information see Connect your TV gt Connect to a network and the Internet Page 61 Follow these instructions to download the application Philips MyRemote 1 Visit the Apple App store or Google Play to download the application Philips MyRemote on your smartphone 2 Follow the instructions provided at the applications store Watch TV Switch TV on or off Sam O CU Switch the TV on e Connect the TV to the mains outlet and switch on the main power e f the TV is not switched on the standby LED remains off Press on he TV e fthe standby LED is lit press on the remote control Note The
89. s e Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty EN 6 Pixel characteristics This LCD LED product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction CE compliance This product is in compliance with the essential requirements and other relevant provisions of Directives 2006 95 EC Low Voltage 2004 108 EC EMC and 2011 65 EU ROHS Compliance with EMF TP Vision Netherlands B V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field EMF standards applicable at the time of producing he products Philips is committed to develop produce and market products that cause no adverse health effects TP Vision confirms that as ong as its products are handled properly for heir intended use they are safe to use according to scien
90. s channel 3 amp SOURCE Watch a connected device 4 lt Volume Increase or decrease volume Sensors and indicators 6 ft Home Access the Home menu 7 OK Confirm an entry or selection 8 SMART TV Access Smart TV 9 AW4 b Navigation buttons Navigate through menus and select items n 11 E z tt iz 13 10 LIST Access the TV channel list 11 amp 3 FORMAT Change the picture format to suit the video source 12 G INFO Display information about current activity 13 tlf OPTIONS Access currently available options picture and sound menus EN 15 ss 17 14 Back Return to the previous menu page or exit from a TV function 15 CH Switch channels 16 Volume Adjust volume 17 Mute Mute or restore audio 18 Colour buttons Select tasks or options The buttons function according to the services offered by the service provider 19 SUBTITLE Switch on or off subtitles 20 0 9 Numeric buttons Select TV channels or enter text 21 TEXT Enable or disable text EN 12 EasyLink controls If you connect your TV to HDMI CEC enabled devices such as a Blu ray player or home theatre you can control them at the same time with one remote control Simply switch on EasyLink after connection Read more about Easylink in Connect your TV gt Set up Easylink devices gt Control devices Page 59 On screen remote cont
91. s OK to confirm The icon of the video store is added to the home page 4 To access a store select its icon and press OK Rent a video Follow the onscreen instructions to rent and watch the video 1 Open a video store app You may need to register or enter your log in information 2 Select a video 3 Make the online payment 4 Start watching the video EN 24 What you can do With interactive TV you can view additional information or entertainment pages provided by digital TV broadcasters You can experience true interactivity by responding directly to the digital content Note You cannot download files to your TV with this feature Broadcasters use various interactive T V systems such as e HbbTV Hybrid Broadcast Broadband TV e i V Interactive TV MHEG HP Multimedia Home Platform e DIVi Digital TV interactive Visit the broadcaster s website for more information to see which interactive system is available in your country Here are some examples of interactive activities you can enjoy e View information about TV programmes e lake part in a quiz or competition e Play games e Shop online e Pay for a video on demand VOD programme e Vote e Chat What you need To enjoy this service you need e Digital channels with interactive services e A wired or wireless home network connected through a Universal Plug and Play router uPnP For network conn
92. s transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet symptoms persi watching 3D wi medical profess st do not resume ithout consulting a ional first Parents should monitor their children during 3D viewi not experience ng and ensure they do any discomfort as mentioned above Watching 3D is not recommended for children under six years of age as fully developed Do not use the heir visual system is not yet 3D glasses for any purpose other than watching this 3D TV Care Placement tips e Position the TV where light does not shine directly on the screen Screen e he ideal viewing distance of this TV is e Risk of damage to the TV screen hree times its diagonal screen size For Never touch push rub or strike the example if the diagonal screen size of screen with any object he TV is 81 cm 32 the ideal viewing e Unplug the TV before cleaning distance is 2 5 m 92 from the e Clean the TV and frame with a soft front of the screen damp cloth and wipe gently Never use e While seated your eyes should be level substances such as alcohol chemicals or with the centre of the screen household cleaners on the TV TV placement e To avoid deformations and colour You can apply the best sound settings for fading wipe off water drops as soon as your TV by selecting the T
93. st the picture to fill the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC e Auto zoom Enlarge the picture to fill the screen Recommended for minimal screen distortion but not for HD or PC e Super zoom Remove the black bars on the sides of 4 3 broadcasts Not recommended for HD or PC e Movie expand 16 9 Scale 4 3 format o 16 9 Not recommended for HD or PC e Wide screen Shows widescreen format content unstretched Not recommended for HD or PC e Unscaled Provide maximum detail for PC Only available when PC mode is selected in the Picture menu e 4 3 Display the classic 4 3 format EN 16 What you can do You can view channel schedules and programme synopses for digital TV channels using programme guides provided by the broadcasters The availability of programme guides is dependent on your broadcaster You can view programme guides through one of two methods e From the broadcaster e From the Internet You cannot view a channel s programme guide information if he age rating of the channel is equal or higher than the age rating set on your TV he channel is locked From the broadcaster Select broadcaster programme guide Before you use the programme guide check the following settings 1 Press ff 2 Select Setup gt TV settings gt General settings gt TV guide 3 Select From the broadcaster then p
94. t Dynamically enhance the details in the dark medium and light areas of the picture Dynamic backlight Select a backlight level to optimise dynamic power consumption and picture contrast Colour enhancement Dynamically enhance the vividness and details of colours Advanced Access advanced settings such as gamma tint settings and video contrast settings Light sensor Adjust the brightness of the TV screen automatically according to the lighting conditions of the room Gamma Adjust the non linear setting for picture luminance and contrast Tint Change the colour balance Custom tint Customise colour balance setting Only available if Tint gt Custom is selected 3D video contrast Video contrast Adjust video contrast Brightness Adjust screen brightness Hue Compensate colour variations in NTSC transmissions Game or computer When viewing content from a connected game console select Game to apply game settings When a computer is connected through HDMI select Computer Make sure that Format and edges gt Picture format gt Unscaled is selected to view maximum detail EN 37 English e Format and edges Access advanced settings to control the display format of the picture Picture format Change the picture format Screen edges Change the picture size Picture shift If available move the position of the picture
95. t See Change your TV settings Satellite Settings gt Install satellite channels Page 41 1 Press ff 2 Select Setup gt Search for satellite then press OK 3 Select Add satellite then press OK The TV searches for a satellite on the first free LNB This can take several minutes 4 If no satellite is found check the antenna connections and the position of the dish antenna then select Search again 5 If you are satisfied with the added satellite select Next to install all channels from the satellite The installation can take several minutes Remove a satellite 1 Press fft 2 Select Setup gt Search for satellite gt Remove satellite then press OK 3 Select the satellites you want to remove then select Remove and press OK Language settings Menu language 1 While you watch TV press fft 2 Select Setup gt TV settings gt General settings gt Menu language 3 Select a menu language from the list then press OK Subtitles on digital channels 1 While you watch a digital TV channel press ttf OPTIONS 2 Select Subtitles then press OK 3 Select Subtitles off Subtitles on or Automatic then press OK Audio language If the TV channel broadcasts multiple or dual audio languages you can select your preferred audio language 1 While you watch TV press tff OPTIONS 2 For digital channels select Audio language For analog
96. th a single button 1 While you watch TV press Recording starts immediately A pop up window is displayed indicating the end time of the programme 2 Optional Use mark the end tim he Navigation buttons to e of the recording 1 Connect the U the TV or if you USB devices in fu drive through a U I SB hard drive directly to intend to connect other ure connect the USB hard SB hub 2 Switch on the TV and the USB hard drive if tt has an external power source 3 Switch to a digi ital TV channel 4 Press Hl to sta drive rt formatting the USB hard 5 Follow the onscreen instructions to complete the formatting process Warning The formatting process may take some time Do not switch off the TV or disconnect the USB hard drive until this process is complete EN 28 3 Select Confirm then press OK 4 To stop recording press Bl Note e While recording you cannot switch TV channels or pause a TV broadcast e If TV guide information is not available a default time of 30 minutes is set for recording You can change this if needed Schedule recordings View programme information Depending on the status of a programme you can start watching it or schedule to record the programme 1 Press ff 2 Select TV guide 3 Select a channel and programme then press OK The programme information is displayed Note If you schedule recordings while you are awa
97. the picture is distorted e Make sure that the antenna is properly connected to the TV e Make sure that the correct device is selected as the display source e Make sure that the external device or source is properly connected There is sound but no picture Make sure that the picture settings are set correctly There is poor TV reception from an antenna connection e Make sure that the antenna is properly connected to the TV EN 66 e Loud speakers unearthed audio devices neon lights high buildings and other arge objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e f reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices ake sure that the devices are connected properly ake sure that the picture settings are set correctly The TV did not save your picture settings Make sure that the TV location is set to Home You can change and save settings in this mode The picture does not fit the screen it is too big or too small Change to a different picture format The picture format keeps changing with different channels Instead of the picture format Auto zoom select a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal
98. tific evidence available oday Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Open source This product contains software licensed under an open source licence For acknowledgments and licence texts please refer to the electronic in product user manual TP Vision Netherlands B V hereby offers to deliver upon request a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licences This offer is valid up to three years after product purchase to anyone in receipt of this information To obtain source code please send your request in English with product number to Intellectual Property Department TP Vision Netherlands B V P O Box 80077 5600 KA Eindhoven The Netherlands Trademarks and copyrights Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries DOLBY DIGITAL PLUS Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in t
99. tings You can apply these settings or customise them Select your preferred picture settings 1 While you watch TV press tt OPTIONS 2 Select Picture and sound gt Picture style then press OK 3 Select an option then press OK e Personal Apply your personalised picture settings e Vivid Rich and dynamic settings ideal for daytime viewing e Natural Natural picture settings Standard Default settings that suit most environments and types of video Movie Ideal settings for movies e Photo Ideal settings for photos e Energy saving Settings that conserve the most energy EN 15 English Select your preferred sound settings 1 While you watch TV press tff OPTIONS 2 Select Picture and sound gt Sound style then press OK 3 Select an option then press OK e Personal Apply your personalised sound settings e Original Settings that suit most environments and types of audio e Movie Ideal settings for movies e Music Ideal settings for listening to music e Game Ideal settings for games e News Ideal settings for spoken audio such as the news View programme guide Change picture format You can change the picture format to suit the video source 1 Press amp 3J FORMAT 2 Select a picture format then press OK The available picture formats depend on the video source e Auto fill Adju
100. title shift The subtitles are then displayed over the video image Switch on auto subtitle shift 1 Press ft 2 Select Setup gt TV settings gt General settings gt EasyLink 3 Select Auto subtitle shift gt On then press OK Connect to a network and the Internet What you can do View Media If you connect the TV to a home network you can play photos music and videos from your computer See Use your TV gt Play multimedia files Page 19 Smart TV If you connect the TV to a home network with an Internet connection you can browse Smart TV Smart TV offers Internet services and websites tailored to your TV Play music and videos consult infotainment rent movies and much more See Use your TV gt Smart TV Page 22 What you need Warning This TV complies with the EMC directive only when you use a shielded Cat5 Ethernet cable e A computer network that includes a A universal plug and play UPnP router and b A computer with one of the following operating systems Microsoft Windows XP Microsoft Windows Vista Mac OS X or Linux e To connect your TV to computers you need to install and configure a media server on your computer See Use your TV gt Play multimedia files Page 19 e To connect your TV to the Internet you also need a high speed connection to the Internet Connect EE Lu A rT You can connect this TV to your home network throug
101. ue channels select Dual I II Press OK to confirm your selection 3 Select from the available languages then press OK You can set your preferred primary and secondary audio languages to hear when available 1 While you watch TV press fft 2 Select Setup gt Channel settings or Satellite settings gt Languages 3 Select Primary audio language or Secondary audio language and select from the available languages 4 Press OK to confirm Subtitles on analogue channels 1 While you watch an analogue TV channel press TEXT 2 Enter the three digit page number of the subtitles page which is usually 888 If available subtitles are switched on Subtitle language When available you can change the subtitle language for digital channels 1 While you watch TV press tff OPTIONS 2 Select Subtitle language then select from the available languages and press OK The subtitle language is changed for the specific channel You can set your preferred primary and secondary subtitle languages to display when available 1 While you watch TV press fft 2 Select Setup gt Channel settings or Satellite settings Languages 3 Select Primary subtitle language or Secondary subtitle language and select from the available languages 4 Press OK to confirm EN 43 English Universal access settings Switch on Some digital TV broadcasters provide special audio a
102. utton on the remote control and notice red flickering at the sensor the remote control is working but the TV may need to be checked by Philips Consumer Care This troubleshooting procedure is not applicable to remote controls that are paired wirelessly with the TV When the TV is in standby a start up splash screen is displayed then the TV returns to standby mode This is normal behaviour When the TV is disconnected and reconnected to the power supply the startup screen is displayed at the next startup To switch on the TV from standby press on the remote control or press any key on the TV The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before you reconnect the power cable If the blinking reoccurs contact Philips Consumer Care The TV audio is in the wrong language f you select audio language via lit OPTIONS the TV resets to the default anguage when you change channels or switch off the TV To retain the selected anguage change your audio language by pressing fft then selecting Setup gt Channel settings or Satellite settings gt Languages gt Primary audio language or Secondary audio language The TV or Smart TV menu is in the wrong language Change the menu to your preferred language For more information see Change your TV settings gt Language settings gt Menu language Page 43 You forgot the 4 digit co
103. vice is compatible with the TV ake sure that the audio and picture file formats are supported by the TV Audio and picture files on your USB storage device do not play or display smoothly The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback EN 67 English Network issues You want to establish a wireless connection between your TV and home network Refer to Connect your TV gt Connect to a network and the Internet gt Wi Fi integrated Page 62 for instructions on how to connect your TV to your home network wirelessly Smart TV does not work Check that the router is properly connected to the TV and that your router has open access to the Internet If your router has a firewall or security settings make sure that it allows Smart TV data to pass through check your router documentation for details Internet access via Smart TV is slow e Try to improve the signal quality between the router and TV if you are accessing the Internet wirelessly Refer to the router s documentation for details e Always use a fast broadband connection wherever possible e Update your TV with the latest software to ensure browsing speed is optimal Your network is slow If you are accessing your PC wirelessly refer to the router s documentation to improve the signal quality between the router and TV Wireless network is distorte
104. w you to restart he film Manage voicemails f someone calls you on Skype and you are offline they can leave a voice message in your Skype voicemail Before you can receive voicemail you need o activate voicemail in your Skype account his can only be done on your computer Play voicemail 1 In the Skype menu select History and press OK 2 Select Voicemails then press OK 3 Select the voicemail then press OK to play it Delete voicemails 1 Select the voicemail from the list and press ttf OPTIONS 2 Select Delete voicemail then press OK Play games What you can do On this TV you can play single or two player games in full screen with optimised picture settings for games Skype settings Skype Credit With Skype Credit you can call land lines or mobile phones on your TV To purchase Skype Credit you need to log in to your Skype account on your computer The amount of Skype Credit you purchase will appear when you log in to your Skype account on your TV Automatic sign in 1 In the Skype menu select Settings then press OK 2 Select General settings gt Sign me in when Skype starts then press OK Change your profile picture 1 In the Skype menu select your Skype name then press OK 2 Select Profile picture then press P 3 Choose a picture select Apply then press OK Change your Skype password 1 In the Skype menu select Settings
105. x TTML Character encoding teml e Windows 1250 CP 1250 Central Europe and Eastern Europe Latin Czech Hungarian Polish Slovak Slovenian Croatian Romanian Serbian e Windows 1251 CP 1251 Cyrillic e Windows 1252 CP 1252 Western Europe Latin e Windows 1253 CP 1253 Greek e Windows 1254 CP 1254 Turkish e UIF 8 Multi byte character encoding for Unicode Supported DLNA compliant media server software e Windows Media Player Microsoft Windows e wonky Media Microsoft Windows Mac OS X e Sony Vaio Media Server Microsoft Windows e T Versity Microsoft Windows e Nero MediaHome e DIXiM Microsoft Windows XP e Macrovision Network Media Server Microsoft Windows e Fuppes Linux e uShare Linux EN 72 Connectivity Rear e HDMI 1 ARC HDMI Audio Return Channel e HDMI2 e AUDIO IN DVI Stereo 3 5 mm mini jack e NETWORK Ethernet LAN RJ 45 e SERV U Service port e CVBS Y Pb Pr Audio L R Composite video and audio e DIGITAL AUDIO OUT Coaxial e TV ANTENNA 75 ohm coaxial IEC e SCART RGB CVBS SCART adaptor e SAT F pin satellite for certain models only Side e Cl Common Interface e HDMI e USB1 2 e Headphones Stereo 3 5 mm mini jack Help version UMv 490812132101 8 Index 3D 18 3D glasses care 5 3D 2D to 3D 19 3D change format 18 3D health warning
106. y make sure that you leave the TV in standby and keep the USB hard drive switched on Schedule a TV programme recording You can schedule a recording of an upcoming programme that will be broadcast today or in up to eight days time You can also schedule a timed recording that is not linked to any programme if programme guide information is not available 1 Press fft then select TV guide 2 Select the channel and programme to record 3 Optional To record a programme that will be broadcast on another day press ttt OPTIONS select Change day then select another day 4 Select Record A pop up window is displayed 5 Select and change the recording details with the Numeric buttons and Navigation buttons 6 Select Confirm then press OK Change a scheduled recording 1 Press ff 2 Select Recordings then press OK A list of scheduled recordings is displayed 3 Select the recording then select Adjust time 4 Change the recording time as needed then select Confirm Cancel a scheduled recording 1 Press ff 2 Select Recordings then press OK A list of recordings is displayed 3 Select the recording then select Remove The schedule recording is cancelled Watch recordings 1 Press ff 2 Select Recordings then press OK A list of recordings is displayed 3 Select a recording from the list then press OK The recording starts to play Sort recordings 1

Philips 46PFL4908H/12 46" Full HD 3D compatibility Smart TV Wi-Fi Black LED TV

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 46PFL4908H/12 46&quot; Full HD 3D compatibility Smart TV Wi-Fi Black LED TV

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 46PFL4908H/12 46" Full HD 3D compatibility Smart TV Wi-Fi Black LED TV