Infocus Mondopad Touch Display 55" (incl camera, soundbar & feet)
Contents
1. Mondopad shuts down suddenly Check the Sleep Timer setting in the Configuration 2 OSD menu Disable the Sleep Timer if desired Verify that a source is active Mondopad may have overheated Remove any objects blocking the vents Review the Windows power settings of the Mondopad tablet Mondopad is turning on and or off Check both the Date amp Time settings and the Schedule settings in the automatically at the same time of Advanced Option OSD menu to verify accuracy Disable scheduling if day desired No image If attempting to display an external source see No image from external source below Verify that Mondopad is turned on the front LED should be solid green Verify that the Mondopad PC is turned on the PC LED on the back of Mondopad should be solid green Check the Operation mode in the OSD menu To see the Mondopad Col laboration software the Configuration 1 gt Operation Mode must be set to AIO Note Mondopad must be powered off and back on for changes to take effect No image from external source Verify that connections between the source and the tablet have been made correctly Verify that the cables are in good condition Verify the correct input source is selected and that the input signal is compatible with the tablet If the external source is not detected the Video source menu defaults back to PC Mondopad Mondopad is not acting like a simple Change the Operation mode to Monitor in the Configuratio2. RJ45 2 USB B 1 and USB A 6 a OO a a 8 O fl LH BB 7 in Bezel Connector a EL a saat al t Panel rs a A d ide Connector De Panel O m N A AE 00 he amp Bottom Connector Panel Page 14 Bezel Connector Panel Power button Keypad USB A jacks USB B jack Side Connector Panel NF O O Audio Out L R RS232 RJ45 USB A Power LED for Sound Bar Antennas Audio In L R PC Reset Audio In 3 5mm button Bottom Connector Panel Power switch AC Powerin Hpmi Component S video AC Power Out YPbPr Composite VGA Connecting AC Power 1 Connect one end of the AC power cord to the AC In jack on the back of the tablet 2 Connect the other end of the AC power cord to an AC outlet 3 Press the power switch on the Bottom Connector Panel ON The LED on the front of the Mondopad tablet displays red NOTES e Your tablet should only be operated from the power source indicated on the label e Always unplug the AC power cord from the power outlet when you are not using your tablet for an extended period of time INF5520 Hardware Guide Page 15 Turning the INF5520 On Off 1 Verify that the power cord is connected to a power outlet and that the power swi
3. Battery Life 150 working hours continuous operation Operating Distance 10M without signal disturbance and no direction limit Operating Voltage 2 0V 3 2VDC INF5520 Hardware Guide Page 35 Limited Warranty InFocus Limited Warranty For InFocus Branded Hardware Products Only LIMITED WARRANTY InFocus s warranty obligations for the hardware products are limited to the terms set forth herein InFocus war rants the InFocus branded hardware products against defects in materials and workmanship under normal use for a period outlined in the Limited Warranty Periods section below from the date of retail purchase by the original end user purchaser Warranty Period The Warranty Period starts on the date of purchase Your dated sales or delivery receipt showing the date of purchase of the product is your proof ofthe purchase date You may be required to provide proof of purchase and proof that the product was purchased new as a condition of receiving warranty service If a hardware defect arises and a valid claim is received within the Warranty Period at its op tion and to the extent permitted by law InFocus will either 1 repair the hardware defect at no charge using new parts or refurbished parts that are equivalent to new in performance and reliability 2 exchange the product with a product that is new or refurbished that is equivalent to new in performance and reliability and is at least functionally equivalent to the original product or
4. e Disconnect all accessories and cables before moving the tablet e If the tablet is installed against the wall maintain a distance of at least 1 98 5cm between the tablet and the wall to provide adequate ventilation e Refer to this guide for proper startup and shutdown procedures e Follow all warnings and cautions in this manual and on the tablet e Locate the tablet at least 4 1 2m away from heating and cooling vents e Do not block ventilation openings Locate the tablet in a well ventilated area without obstructions to intake or exhaust vents e Do not install or use the tablet or sound bar near any heat sources such as radiators heat registers stoves or other devices in cluding amplifiers that produce heat e Do not place the tablet in direct sunlight humid greasy or dusty places or in places where the tablet may come into contact with rain smoke or steam e The tablet should not be used with the power cord near water for instance near a bathtub washbowl kitchen sink or swimming pool etc e Do not use any components of the tablet including the sound bar near water Warning To reduce the risk of fire or electric shock do not expose this equipment or any component of this equipment to rain or moisture e Do not drop the tablet e Do not spill liquid on the tablet Spilled liquid may damage the tablet e WARNING This apparatus must be securely attached to the floor wall per installation instructions Tipp
5. should perform service on the hardware products TO THE EXTENT PERMITTED BY LAW THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL WRITTEN STATUTORY EXPRESS OR IMPLIED AS PERMITTED BY APPLICABLE LAW INFOCUS SPECIFICALLY DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS IF INFOCUS CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE EXTENT PERMITTED BY LAW ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THE EXPRESS WARRANTY AND TO THE REPAIR OR REPLACEMENT SERVICE AS DETERMINED BY INFOCUS IN ITS SOLE DISCRETION NO INFOCUS RESELLER AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION EXTENSION OR ADDITION TO THIS WARRANTY IF ANY TERM INF5520 Hardware Guide Page 37 IS HELD TO BE ILLEGAL OR UNENFORCEABLE THE LEGALITY OR ENFORCEABILITY OF THE REMAINING TERMS SHALL NOT BE AFFECTED OR IMPAIRED EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY LAW INFOCUS IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UN DER ANY OTHER LEGAL THEORY INCLUDING BUT NOT LIMITED TO LOSS OF USE LOSS OF REVENUE LOSS OF ACTUAL OR ANTICIPATED PROFITS INCLUDING LOSS OF PROFITS ON CONTRA
6. be asked to go online to find the necessary drivers If you 2 Y are warned that the drivers have not been tested for compatibility tap Continue installation to finish 4 Insert two 2 AAA batteries not included into the mouse by aligning the and end of the batteries as indicated and sliding them in place 5 Replace the cover and switch the mouse ON using the slide switch next to the battery bay _ gt ir K r wo Wireless Keyboard w T 1 Turn the keyboard over and open the battery cover 2 Insert two 2 AAA batteries not included into the keyboard by aligning the and ends of the batteries and sliding them in place 3 Replace the cover 4 Press the CONNECT button and hold it for one second to allow the keyboard to bind with the dongle INF5520 Hardware Guide Page 17 Using the Remote The remote uses two 2 AAA batteries not included Install the batteries by removing the cover from the remote s back aligning the and ends of the batteries sliding them in place and replacing the cover To operate point the remote at the tablet sensor at the bottom right hand corner of the tablet The range of optimum operation is about 26 8m and within a horizontal and vertical angle of 30 degrees CAUTION e When disposing of the batteries be sure to do so in an environmentally proper manner e If the remote control gets wet
7. for the travel and labor costs of this service e Parts for which customer self repair is optional These parts are also designed for customer self repair If however you require that InFocus replace them for you this may be done at no additional charge under the type of warranty service designated for your product Based on availability and where geography permits InFocus will attempt to ship CSR parts out the next business day Customer re Page 38 ceipt will vary based upon the actual part customer location and shipping method Next day same day or four hour delivery may be offered at an additional charge where geography permits If assistance is required you can call the InFocus Technical Support Center and a technician will help you over the phone InFocus specifies in the materials shipped with a replacement CSR part whether a defective part must be returned to InFocus In cases where it is required to return the defective part to InFocus you must ship the defective part back to InFocus within a defined period of time normally five 5 business days and clearly display the Return Material Authorization RMA on the outside of the shipping carton or a similar package affording an equal degree of protection The defec tive part must be returned with the associated documentation in the provided shipping material Failure to return the defective part may result in InFocus charging you for the replacement With a Customer Self Repair InFoc
8. help determine whether your product requires service and if it does will inform you how InFocus will provide it You must assist in diagnosing issues with your product and follow InFocus s warranty processes InFocus may restrict service to the country where InFocus or its Authorized Distributors originally sold the hardware product InFocus will provide warranty service either i at an ASP location where service is performed at the loca tion or the ASP may send the product to an InFocus repair service location for service ii by sending you prepaid way bills and if you no longer have the original packaging InFocus may send you packaging material at your cost to enable you to ship the product to an InFocus repair service location or iii by sending you customer installable new or refurbished replacement parts to enable you to conduct Customer Self Repair or iv by exchanging the product for a new or refurbished replacement Customer Self Repair InFocus products are designed with many Customer Self Repair CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement If during the diagnosis period InFocus identifies that the repair can be accomplished by the use of a CSR part InFocus will ship that part directly to you for replacement There are two categories of CSR parts e Parts for which customer self repair is mandatory If you request InFocus to replace these parts you will be charged
9. interference that may cause undesired operation INFORMATION POUR LES DISPOSITIFS DE FR QUENCE RADIO SEULEMENT Cet appareil est conforme l article 15 des r glementations de la FCC CNR 210 Le fonctionnement est subordonn aux deux condi tions suivantes 1 ce appareil ne doit pas provoquer d interf rences nuisibles et 2 ce appareil doit accepter toute interf rence recue y compris des interf rences qui peuvent provoquer un fonctionnemnent non d sir INFORMATION FOR OPTICAL POINTING DEVICES ONLY This product has been tested to comply with International Standard IEC 60825 1 1993 incld Amd 2 2001 This product uses LEDs that are inherently Class 1 INFORMATION POUR LES DISPOSITIFS DE POINTAGE OPTIQUE SEULEMENT Ce produit a t test pour se conformer la norme IEC 60825 1 1993 y comp Amd 2 2001 Ce produit utilize des DEL qui sont par nature de classe 1 Dongle Label Model RG 0918 FEO 1C 8150A RG0918 CMIIT 1D 2009D12362 CFT RCPINRG11 0903 FCC ID E8HRG 0918 RG 0918 IC 8150A RG0918 CMIIT 1D 2009DJ2362 CFT RCPINRG11 0903 FCC ID E8HRG 0918 Waste Electrical and Electronie Equipment WEEE NOTE This product is covered electrical and electronic equipment under the European Union s Waste from Electrical and Electronic Equipment WEEE Directive 2002 96 EC The WEEE Directive requires that covered equipment be collected and managed separately from typical household wa
10. tablet 8 Turn the power switch ON 9 Route the power cord and audio cable through the large bracket and align the bracket against the back side of the tablet and sound bar 10 Fasten the bracket securely to the tablet and sound bar with the four remaining screws B u th EOE E g INF5520 Hardware Guide Page 11 Installing the Feet 1 If you have not already done so carefully place your tablet face down on a clean cushioned surface with the top edge hanging off of the cushioned surface by 4 5 10 13cm Do NOT place the INF5520 on its back 2 Remove the tablet feet slot covers with a Philips screwdriver Discard or save for future use 3 Slide the feet into the slots provided the longer side of the feet point toward the front of the tablet then secure the legs to the tablet with the provided screws Use the included spacers and secure the legs here when attaching the sound bar Front View o Po D o o o 4 Using the handles on the back of the tablet lift the tablet upright Secure the legs here when the sound bar is not being attached The spacers are not used For additional accessory options such as stands carts and wall mounts see the InFocus website www infocus com store or your local de
11. wipe it dry immediately e Avoid excessive heat and humidity e Ensure the batteries polarity is properly aligned e Do not mix new and old batteries or different types of batteries together e Replace the batteries as soon as they run out e Remove batteries from the remote control when storing or not in use for a prolonged period Page 18 The remote has the following buttons HOME INPUT MENU Lola a ON OFF INPUT MENU 8 POSITION RESIZE im PIP ON OFF ol AUDIO lt BRIGHTNESS CONTRAST BACK D k Avok INF5520 Hardware Guide Power Switches the power on or puts the tablet into Standby Home Changes the active source back to the embedded PC Mon dopad Input Toggles the Source menu on and off which allows the user to change sources Options include HDMI1 HDMI2 PC Mondo pad VGA Component S video and Video composite Menu Turns the OSD menu on and off Resize Switches aspect ratios PiP On Off Turns the PiP function on and off and changes the PiP configuration between two active PiP sources Options include corner and side by side configurations 50 resized 25 resized and 50 fullscreen depending on source types PiP Input Switches the PiP window source Options include HDMI1 HDMI2 PC VGA Component S video and Video Note The PiP window is not visible when a secondary source has not been selected PiP Swap Swit
12. 3 refund the purchase price of the product InFocus may request that you replace defective parts with customer installable new or refurbished parts that InFocus provides in fulfillment of its warranty obligation Customer Self Repair A replacement product or part including a Customer Self Repair part that has been installed in accordance with instructions provided by InFocus assumes the remaining war ranty of the original product or ninety 90 days from the date of replacement or repair whichever provides longer coverage When a product or part is exchanged any replacement item becomes your property and the replaced item becomes InFocus s property Parts provided by InFocus in fulfillment of its warranty obligation must be used in products for which warranty service is claimed When a refund is given the product for which the refund is provided must be returned to InFocus and becomes InFocus s property This is your exclusive remedy for defective products Limited Warranty Periods are as follows e LCD Thin Tablet Device including embedded PC Camera Remote and Sound Bar Product Limited Warranty Period one 1 year from date of purchase e Accessory Product Limited Warranty Period ninety 90 days from date of purchase The Accessory Product Limited Warranty covers the accessory items only and excludes normal wear and tear Remanufactured Products and Software Products are exempt from the foregoing Limited Warranty Please refer t
13. CTS LOSS OF THE USE OF MONEY LOSS OF ANTICIPATED SAVINGS LOSS OF BUSI NESS LOSS OF OPPORTUNITY LOSS OF GOODWILL LOSS OF REPUTATION LOSS OF DAMAGE TO COMPROMISE OR CORRUPTION OF DATA OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY ANY COSTS OF RECOVERING PROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH THE INFOCUS PRODUCT AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT THE FOREGOING LIMITATION SHALL NOT APPLY TO DEATH OR PERSONAL INJURY CLAIMS OR ANY STATUTORY LIABILITY FOR INTENTIONAL AND GROSS NEGLIGENT ACTS AND OR OMISSIONS INFOCUS DISCLAIMS ANY REPRESENTATION THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS WARRANTY OR MAKE A PRODUCT EXCHANGE WITHOUT RISK TO OR LOSS OF PROGRAMS OR DATA LIMITATION ON BRINGING ACTION NO ACTION REGARDLESS OF FORM ARISING OUT OF THE AGREEMENT TO PURCHASE THE PRODUCT MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR AFTER THE CAUSE OF ACTION HAS ACCRUED GOVERNING LAW ANY ACTION REGARDLESS OF FORM ARISING OUT OF THE AGREEMENT TO PURCHASE THE PRODUCT IS GOVERNED BY THE LAWS OF THE STATE OF OREGON U S A MANDATORY ARBITRATION ANY ACTION REGARDLESS OF FORM ARISING OUT OF THE AGREEMENT TO PURCHASE THE PRODUCT IS SUBJECT TO MANDATORY ARBITRATION ADDITIONAL RIGHTS FOR CUSTOMERS WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUN TRY OF PURCHASE OR IF DIFFER
14. ENT THEIR COUNTRY OF RESIDENCE THE BENEFITS CONFERRED BY THIS WARRANTY ARE IN AD DITION TO ALL RIGHTS AND REMEDIES PROVIDED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS THIS WARRANTY DOES NOT EXCLUDE LIMIT OR SUSPEND ANY RIGHTS OF CONSUMERS ARISING OUT OF NONCONFORMITY WITH A SALES CON TRACT SOME COUNTRIES STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE QUENTIAL DAMAGES OR ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITION MAY LAST SO THE LIMITA TIONS OR EXCLUSIONS DESCRIBED BELOW MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY COUNTRY STATE OR PROVINCE INFOCUS THE WARRANTOR UNDER THIS LIMITED WARRANTY IS IDENTIFIED AT THE END OF THIS DOCUMENT EXTENDED WARRANTIES InFocus extended product warranties are available for an additional charge For further information on InFocus extended product warranties please contact InFocus or your product reseller OBTAINING WARRANTY SERVICE Please access and review the online help resources located at www infocus com support before seeking warranty service If the product is still not functioning properly after making use of these resources please contact InFocus Technical Support or if applicable an ASP using the information provided below When contacting InFocus via telephone other charges may apply depending on your location When calling InFocus Technical Support or an ASP will
15. INF5520 InFocus 009 1427 00 Bright Ideas Made Brilliant Contents Declaration OF CET 0 010 LATIN EE e 3 Safety Consideras idad a 6 Intormation aboutthis HardWware Guide ucraniana 8 Whats INA SR nE a nat ete di st ne eee ee ne ai tes 9 SOQTUP scene ennemie E anne nannn element ne en nel e nan m ere a a ne ann niet E A de needed s 10 Attaching the Sound Bar RM dt iio ae 10 Instale the EStdt cad aci ao ici 12 Attaching the HD Video Conferencing Camera u ccccccsssccccecsssssnsceceeeceeseaeseeeseceeeeeeaeseeeceseeseeaeeeeeeececseeaeseeeesseesesaeaeeeeseseseueaeeeeess 13 Connecting tO OEMEMIDEVICES idea 14 Connecting AC POWEL arica alt NI dc 15 Tuning the INESS20 00 O fe nr anio 16 Setting up the Wireless Mouse and Keyboard mica didas 17 Wireless MOUSE atacada aa olla andan cto do ed 17 Wireless Keyboard ivi a ai a RA aia bae 17 Usine the REMOt a A A ad 18 Use tk DAC ira oa 20 OSD On Screen Display Memu Syste Mii A A EA ENETEIA ESES 21 Picture MENU soii ai laa oia 22 A O EAE AEA EE EAEE ESEA AEA 23 AUGIONNGAU ori adi s 24 aO A E E E EE E 25 CONSUL o E E E E E E E A E 27 GO A LT eiTe E E E ena A E S rita 28 Advanced OPIO rte E 29 De LD Lo LEE cholo al a r E r a e rere Mere rer E E 30 Specification 33 Limited WMV AS ra 36 Declaration of Conformity Manufacturer InFocus Corporation 13190 SW 68th Parkway Portland Oregon 97223 8368 USA CE We declare under our sole responsibility that this tablet conforms t
16. SAVE D _ INFORMATION OSD PIP RESET 5 LANGUAGE ENGLISH SLEEP TIMER SCREEN SAVING COLOR SYSTEM OPERATION MODE AIO gt MONITOR INFORMATION BLANI Li ON BLANK SCREEN TYPE BLACK CONFIGURATION RESET M FACTORY RESET VVAMA VAY ADVANCED OPTION INPUT RESOLUTION 1 1 BLACK LEVEL EXPANSION GAMMA SELECTION SCAN MODE SCAN CONVERSION j FILM MODE IR CONTROL KEYBOARD CONTROL MIDDLE 2 2 UNDER SCAN PROGRESSIVE AUTO HEAT STATUS DATE AND TIME SCHEDULE MONITOR ID DDC CI ADVANCED OPTION RESET VAV VVVVVAAAAA INF5520 Hardware Guide Page 21 Picture Menu PICTURE BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL NOISE REDUCTION TINT COLOR COLOR TEMPERATURE COLOR CONTROL ADAPTIVE CONTRAST PICTURE MODE PICTURE RESET Brightness changes the intensity of the image Range 0 100 Default 70 Contrast controls the degree of difference between the lightest and darkest parts of the picture and changes the amount of black and white in the image Range 0 100 Default 50 Sharpness changes the clarity of the edges of a video image Range 0 100 Default 50 Black Level changes the level of brightness at the darkest black part of the image Range 0 100 Default 50 Noise Reduction reduces temporal and or spatial noise in the image Options include Off default Low Middle and High Tint adjusts the red green color balance in the image of NTSC video images The tint setting applies to NTSC video sou
17. aler WARNINGS e This tablet is very heavy and should be moved by at least two individuals e Three screw holes have been included in each leg to allow you to adjust the height of the tablet Regardless of the height you must use two of the screw holes in each leg Failure to do so may result in the screw begin sheared off and the leg collapsing e When mounting the tablet to a wall metric 8 12mm screws must be used In addition the mounting interface should comply with the UL1678 standard in North America The mounting means should be strong enough to bear the weight of the monitor approximately 114 2 lbs 51 8 kg without the stand Page 12 Attaching the HD Video Conferencing Camera 1 Remove the plastic film from the camera lens 2 Align the camera bracket with the screw holes on the top edge of the backside of the tablet and then secure the camera to the tablet with the two provided thumb screws 3 Plug the USB cable into an available USB slot on the back of the tablet 4 Manually tilt and pan the camera 40 as desired INF5520 Hardware Guide Page 13 Connecting to Other Devices A full range of digital and analog video inputs and audio source devices can be connected to the connection panels on the back and side of Mondopad if desired Available jacks include HDMI 2 VGA Component RCA S Video Composite RS232 Audio in RCA 1 R L Audio in 3 5mm 1 Audio Out 1 R L
18. ble import and export laws and regulations and be responsible for all custom duties V A T and other associated taxes and charges Where international service is available InFocus may repair or exchange defective products and parts with comparable products and parts that comply with local standards In accordance with applicable law InFocus may require that you furnish proof of purchase details and or comply with registration requirements before receiving warranty service Resources with more details on this and other matters on obtaining warranty service are described below PRIVACY InFocus will maintain and use customer information in accordance with the InFocus Privacy Policy available at www Infocus com privacy and InFocus s applicable legal obligations BACKUP If your product is capable of storing software programs data and other information you should protect its contents against possible operational failures Before you deliver your product for warranty service it is your responsibility to keep a separate backup copy of the contents remove all personal information and data that you want to protect and disable any security passwords THE CONTENTS OF YOUR PRODUCT WILL BE DELETED AND THE STORAGE MEDIA REFORMATTED IN THE COURSE OF WARRANTY SERVICE Your product or a replacement product will be returned to you as your product was configured when originally purchased subject to applicable updates InFocus may install system software updates as part
19. ccessory options such as stands carts and wall mounts see the InFocus website www infocus com store or your local dealer The stylus was added as a standard accessory to INF5520 serial number BJEE14900912 and later INF5520 Hardware Guide Page 9 Setup Attaching the Sound Bar NOTE If you are not attaching the sound bar proceed to the next section Installing the Feet on page 12 1 Carefully place your tablet face down on a clean cushioned surface with the top edge hanging off of the cushioned surface by 4 5 10 13cm Do NOT place the INF5520 on its back 2 Attach the two small rectangular brackets to the sound bar with the provided screws as shown below 3 Remove four screws from the back of Mondopad as shown below Page 10 4 Align the rectangular brackets with the screw holes on the tablet and using the screws from Step 3 secure the sound bar against the bottom edge of the tablet A A y 5 Connect one end of the AC power cord to the AC In jack on the back of the sound bar 6 Connect the other end of the AC power cord to the AC Out jack on the Bottom Connector Panel of the tablet Power Switch 7 Plug the sound bar s audio cable into the Audio Out RCA R L jack on the Side Connector Panel located on the back of the
20. ce menu on allowing the user to change sources Saves chang es selections if the OSD menu is on Power button Switches the power on or puts the tablet into Standby OSD On Screen Display Menu System The OSD provides the user the ability to control the Mondopad display This is different than the Mondopad collaboration software described in the Mondopad Software Guide To access the OSD press the Menu button on the remote or the keypad located on the right hand side of the tablet Use the up and down arrows on the remote or keypad to scroll through the menu options and press OK to enter the highlighted menu Use the up and down arrows and OK button to select the item you would like to adjust Left and right arrow buttons are used to make adjustments When your adjustments are complete press the Back button to go to a different menu or press the Menu button to exit the OSD menu entirely The following pages describe each of the OSD menus in detail PICTURE SCREEN AUDIO BRIGHTNESS 7 HPOSITION BA BALANCE a CONTRAST V POSITION TREBLE 2 gt 4 INTERNAL 4 PC SHARPNESS f CLOCK BASS BLACK LEVEL CLOCK PHASE t SPEAKER NOISE REDUCTION 4 ASPECT RATIO l AUDIO SOURCE TINT E CUSTOM ZOOM i AUDIO RESET COLOR 8 SCREEN RESET COLOR TEMPERATURE 10000K COLOR CONTROL ADAPTIVE CONTRAST OFF PICTURE MODE STANDARD PICTURE RESET PIP CONFIGURATION 4 P CONFIGURATION 2 PIP SIZE AUTO ADJUST OSD TURN OFF PIP AUDIO J POWER
21. ches the position of the main and secondary sources PiP Position Moves the PiP window position from corner to corner upper left upper right lower left lower right PiP Audio Turns the PiP audio mix on and off Brightness Opens the Brightness OSD menu Use the right and left arrow buttons to adjust Contrast Opens the Contrast OSD menu Use the right and left arrow buttons to adjust Back Returns the user to the previous menu Left Right Up Down Arrows and OK Use these buttons to navi gate through and make changes to the Mondopad and Onscreen Menu features Page 19 INFO Info n a Youle Vol up Increases the audio volume Qt Vol down Decreases the audio volume adv MUTE Mute Switches the audio on or off X Using the Keypad The keypad located on the right edge of the tablet has the following buttons Y Page 20 Menu button Turns the OSD menu on and off Left Volume Decrease button Decreases the audio volume when the OSD menu is off Decreases the value of selected OSD items when the OSD menu is on Right Volume Increase button Increases the audio volume when the OSD menu is off Increases the value of selected OSD items when the OSD menu is on Up button Moves the highlight bar up when the OSD or Source menu is on Down button Moves the highlight bar down when the OSD or Source menu is on Mute button Switches the audio on or off OK SOURCE button Turns the Sour
22. e image size to expand slightly and shift the position of pixels in four directions up down left and right Options Off default and a range of 10 900 in increments of 10 Color System Applies to composite and S video signals only When Auto is on the tablet attempts to pick the video standard automatically based on the input signal If Mondopad is unable to detect the standard correctly the colors might appear incor rect or torn If this happens the user can select the proper video standard Options include Auto NTSC PAL SECAM NTSC 4 43 and PAL 60 Operation Mode When Monitor is enabled Mondopad acts like a simple monitor and only displays external source devices The Mondopad collaboration software is unavailable When AIO All in One is enabled both the Mondopad collaboration software and external source devices are displayed Options Monitor and AIO default Blank Enable allows the user to display a blank image when the tablet is in Monitor mode see Operation Mode above and no source is detected Options include On and Off default Blank Screen Type defines the image displayed when the tablet is in Monitor mode see Operation Mode above and no source is detected Options include Black default Blue White and InFocus Logo Configuration Reset resets all Configuration 1 and Configuration 2 menu items to factory default settings Options Yes and No Factory Reset resets all menu items to factory d
23. efault settings Options Yes and No INF5520 Hardware Guide Page 27 Configuration 2 CONFIGURATION 2 OSD TURN OFF INFORMATION OSD SLEEP TIMER OSD H POSITION OSD V POSITION MONITOR INFORMATION OSD Turn Off controls how many seconds the OSD menu remains on the screen Range 5 120 seconds Default 45 Information OSD controls how many seconds the Information OSD remains on the screen Options include Off and a range of 1 10 seconds in increments of 1 Default 10 Sleep Timer adjusts the time when the Mondopad automatically shuts off Options include Off default and range of 1 24 hours in increments of 1 OSD H Position adjusts the horizontal position of the OSD menu Range 0 100 Default 50 OSD V Position adjusts the vertical position of the OSD menu Range 0 100 Default 50 Monitor Information This read only submenu displays the model name serial number firmware version and amount of time the product has been powered on hours minutes Page 28 Advanced Option ADVANCED OPTION INPUT RESOLUTION BLACK LEVEL EXPANSION GAMMA SELECTION SCAN MODE SCAN CONVERSION FILM MODE IR CONTROL KEYBOARD CONTROL MIDDLE 22 UNDER SCAN PROGRESSIVE AUTO TILING HEAT STATUS DATE AND TIME SCHEDULE MONITOR ID D D0707 ADVANCED OPTION RESET VAV VVVVVAAAAA UNA Sel Adjust Enter Back Quit Input Resolution sets the resolution of the VGA input This is only required when the table
24. enerates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communi cations Operation of the equipment in a residential area is likely to cause harmful interference in which case the user will be required to cor rect the interference at his own expense Changes or modifications not expressly approved by InFocus Corporation may void author ity to operate the equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause unde sired operation EN 55022 Warning This is a Class A product In a domestic environment it may cause radio interference in which case the user may be required to take adequate measures The typical use is in a conference room meeting room or auditorium INF5520 Hardware Guide Page 3 Canada This Class A digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe A est conforme la norme NMB 003 du Canada INFORMATION FOR RADIO FREQUENCY DEVICES ONLY This device complies with part 15 of the FCC Rules RSS 210 Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including
25. enu items to factory default settings Options Yes and No The PiP feature allows the user to display two distinct sources simultaneously on the InFocus Mondopad These are the supported combinations and configurations Input Homiz_ cuca Sa HDMI1 HDMI2 PC Mondopad VGA Component S video compose Y 7 INF5520 Hardware Guide Page 25 When the Main picture is PC Mondopad the following configurations are available Corner to Corner When the Main picture is not PC Mondopad the following configurations are available Sarli Bele Corner to Corner Side by Side Picture on Picture Side by Side Stretched Native To change the PiP source Press remote PiP Input button To swap the main and PiP sources Press the remote s PiP Swap button To change the PiP position for Corner to Corner configurations Press the PiP Position button to move from corner to corner or use the arrow keys on the remote or keypad to finely adjust the PiP position To switch PiP configurations when the Main window is not the PC Mondopad Press the PiP On Off button to toggle between the available configuration options To change the audio source between the Main and PiP windows Go to the PiP Audio option in the PiP menu and choose Main or Sub To change the PiP window size Press the Menu button on the remote or keypad and go to the PiP Size option in the PiP menu To reset the PiP feature to factory default setting
26. erly connected to the power outlet and to the Mondopad Verify that the power switch on the back of the unit is turned on Plug another electrical device to the power outlet to verify that the outlet is supplying the proper voltage Off e The tablet is hibernating Press the Power button on the remote or keypad Orange Blinking Green e The tablet is in standby mode Press the Power button on the remote or keypad For Additional Troubleshooting Support please contact InFocus Corporation Technical Support 6am 5pm PST 877 388 8385 www infocus com support Page 32 Specifications To read the latest specifications on the Mondopad collaboration tablet be sure to visit our support website at www infocus com support as specifications are subject to change Full NTSC 480i 480p 720p 1080i 1080p 24 1080p 30 1080p 60 Data input compatibility VGA 640x480 SVGA 800x600 XGA 1024x768 SXGA 1280x1024 SXGA 1400x1050 UXGA 1600x1200 WXGA 1440x900 WSXGA 1680x1050 WXGA 1280x800 WUXGA 1920x1200 Inputs USB 2 0 Type A x 6 HDMI 1 3 x 2 VGA HD15 Component S Video Com posite RS232 DB9 RCA stereo L R audio x 1 3 5 mm stereo mini jack USB B for touch screen controller board RJ45 x 2 RCA audio stereo L R output for sound bar Touch screen e Multi Touch touch screen system with support for 2 touch and Windows 7 gesturing e Glass protection overlay for LCD surface e USB connectio
27. fan settings To change the fan set tings go to the Configuration 1 menu and choose the Screen Saving option Date and Time lists the current date and time information of the Mondopad internal clock and allows the user to make date and time adjustments Options include Year Month Day Hour Minute Daylight Saving Time Schedule Supported in Monitor Mode only enables the user to create up to seven distinct on off schedules for Mondopad For each schedule the user optionally selects the time Mondopad should turn on and off which input source is automatically activated if desired and what day s this occurs Monitor ID set the identification number of the Mondopad tablet via the RS232C connection Each tablet must have a unique iden tification number when multiple tablets are connected Range 1 26 Default 1 DDC CI enables and disables DDC CI communication Options include On default and Off Advanced Option Reset resets all Advanced Option menu items to factory default settings Options Yes and No INF5520 Hardware Guide Page 29 Troubleshooting Symptom Possible Solutions No power Verify the power cord is properly connected to the power outlet and to the Mondopad Verify the Mondopad power switch is ON and that the Power button on the remote or keypad has been turned on the front LED should be green Plug another electrical device to the power outlet to verify that the outlet is supplying the proper voltage
28. he display After 15 minutes e Puts the computer to sleep After 30 minutes To awaken your computer from a display sleep mode press any key on your keyboard If the system has entered a deep sleep mode please press the power button to wake up the system For more information about these settings refer to your Windows Help and Support information system Agency Approvals UL cUL Other specific Country Approvals may apply Please see product certification label This document applies to regulatory model INF5520 Input ratings AC 100 240V 7 5A 50 60Hz InFocus reserves the right to alter product offerings and specifications at any time without notice INF5520 Hardware Guide Page 5 Safety Considerations Please read and follow all safety instructions provided below and on the monitor before connecting the monitor to a power source Failure to comply with safety instructions may result in fire electrical shock or personal injury and may damage or impair protection provided by the equipment Please save all safety instructions e This tablet is very heavy and should be moved and installed by at least two individuals Do not attempt to move or install the tablet yourself otherwise injury and or damage may occur e When moving the tablet always hold the tablet firmly using the side and bottom bezels Do not hold the top bezel e When moving the INF5520 carton do not tilt or invert the carton Always keep it in an upright orientation
29. ing shaking or rocking the machine may cause injury or death e The power outlet used to power this product should be readliy accessible for fast diconnection in case of emergency e No naked flame source such as lighted candles should be placed on the apparatus e Use the power cord provided Connect the power cord to a receptacle with a protective safety earth ground terminal A surge protected power strip is recommended Do not overload wall outlets e It is recommended that the Class 1 tablet be grounded e Do not install the tablet in places subject to mechanical vibration e Do not place the tablet on an unstable surface which could result in serious personal injuries and tablet damage When mount ing the tablet to a stand be sure to following the manufacturer s instructions Use only the mounting hardware recommended by the manufacturer e When disconnecting the power cord hold the plug not the cord e Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the tablet Page 6 e Unplug the tablet if you are not going to use it for an extensive period of time e Unplug the tablet if you need to clean it with the included microfiber cleaning cloth The screen may be wiped with the cleaning cloth when the power is off Never use alcohol solvents or ammonia based liquids on this product e Wash hands after handling the cables supplied with th
30. is product e The tablet remote control mouse and keyboard use batteries Make sure the batteries polarity is aligned correctly Dispose of used batteries in accordance with local disposal laws e Only use properly rated wall and stand mounting hardware that meet this product s specifications and follow the manufacturer installation instructions The warranty does not cover any damage caused by use of improperly rated mounting hardware or from improper installation e Refer all service to qualified service personnel Do not remove the cover or back Servicing your own tablet can be dangerous to you and will void the warranty e Only use replacement parts specified by InFocus Unauthorized substitutions may result in fire electrical shock or injury and may void the warranty e When mounting the tablet to a wall metric 8 12mm screws must be used In addition the mounting interface should comply with the UL1678 standard in North America The mounting means should be strong enough to bear the weight of the monitor approximately 114 2 lbs 51 8 kg without the stand e Follow these instructions to help ensure image quality over the life of the tablet Failure to follow these instructions may affect the warranty e Hg Lamp contains mercury Manage in accordance with local disposal laws See www lamprecycle org e Lithium Battery in PC Box Caution There is a risk of explosion if the battery is replaced by an incorrect type The battery sh
31. le for damage arising from failure to follow instructions relating to the products use INFOCUS IS NOT RESPONSIBLE FOR DAMAGE TO OR LOSS OF ANY PROGRAMS DATA OR REMOVABLE STORAGE MEDIA INFOCUS IS NOT RESPONSIBLE FOR THE RESTORATION OR REINSTALLATION OF ANY PROGRAMS OR DATA OTHER THAN SOFTWARE INSTALLED BY INFOCUS WHEN THE PRODUCT IS MANUFACTURED To enable InFocus to provide the best possible support and service during the Limited Warranty Period you will be required to Page 36 e Maintain a proper and adequate environment and use the InFocus hardware products in accordance with the instructions fur nished e Verify configurations load most recent firmware install software patches run InFocus diagnostics and utilities and implement temporary procedures or workarounds provided by InFocus while InFocus works on permanent solutions e Allow InFocus to keep resident on your systems or sites certain system and network diagnosis and maintenance tools to facilitate the performance of warranty support collectively referred to as Proprietary Service Tools Proprietary Service Tools are and remain the sole and exclusive property of InFocus Additional Limitations e Products external to the system processor CPU box such as external storage subsystems printers and other peripherals are covered by the applicable warranty for those products or options e An effective repair does not necessarily require the replacement of a defec
32. n 1 menu monitor Mondopad must be powered off and back on for changes to take effect Page 30 No sound e f using the Mondopad sound bar verify that the sound bar is connected properly and that the sound bar power switch is turned on e If the sound bar or an external sound system is not being used verify that the Speaker setting in the OSD Audio menu is set to Internal e f using an external source such as S video verify that an audio cable is correctly installed between the device and the tablet e Using the remote verify the volume is turned up enough and not muted e f using the Mondopad collaboration software verify that the volume is not muted in the application Look at the speaker icon in the upper right hand corner of the Mondopad collaboration software e f playing a video verify the playback has not been paused and that the video s audio has not been muted e An HDMI 1 3 or higher source and source device is required to hear audio via the HDMI cable Audio noise e Noise can occur when infrared communication equipment for example infrared cordless headphones is used near the tablet Move the infrared communication equipment away from the tablet to eliminate the noise No touchpad activity with external e Verify that the USB B to USB type A cable is plugged from the laptop into computer Mondopad correctly e Verify that the laptop s operating system is Windows 7 The Mondopad touchpad does not
33. n to PC from touch system panel board VESA standard 400mm x 400mm M6 screws Dimensions H x W x D without 32 4 824mm x 53 1 1350mm x 5 9 151mm stand Weight without stand 114 2 lbs 51 8kg Shipping Weight 141 1 lbs 64kg Intel Core i5 2520m QM67 chipset with support for AMT 7 1 Memory 4GB 8 MB Flash memory DDR3 1333 INF5520 Hardware Guide Page 33 Camera Lens and Field of View F 2 0 3P Lens FOV D 56 8 in HD mode FOV D 50 in VGA mode 1 0x zoom FOV D 30 in VGA mode 1 6x zoom Sound bar Speaker Drivers Two 3 and one Aluminum Neodymium Tweeter per side Left and Right Channels Sound bar Frequency Response 90Hz to 20kHz Sound Pressure Level 98dB SPL max vol 1m pink noise Signal to Noise Ratio SNR 110dB Amplifier Type High efficiency Class D amplifier Power Output Watts Channel 25 watts channel O 1 THD 1KHz 2 channels drive RMS Power Output 50 watts total system Total Watts RMS Power Output 70 watts total system Total Watts Peak Power Input Voltage 90 264 VAC 50 60Hz 1 5 amps Rated Power Consumption 150 watts Keyboard Operation Mode 10mA Sleep Mode lt 60uA Battery Life 800 working hours continuous operation Operating Distance 10M without signal disturbance and no direction limit Page 34 Mouse Dimension 59 2 x 103 6 x 34 8mm Weight 688 excluding batteries Batteries Two 2 AAA alkaline Power Consumption lt 8 5mA 3V
34. nitor screens and incorrect input voltage g to damage caused by service including upgrades and expansions performed by anyone other than a representative of InFocus or an InFocus Authorized Service Provider ASP or your own installation of customer installable parts as instructed by InFocus h to a product or part that has been modified to alter functionality or capability without the written permission of InFocus including use of an unauthorized mount i to defects caused by normal wear and tear or otherwise due to the normal aging of the product j to failure to follow maintenance procedures as outlined in the product user documentation including where a schedule is specified for regular cleaning of certain parts based on usage and environment k to loss or damage in transit or I if the product is not used under normal operating conditions which are defined as use not in excess of 16 hours continuously per day with a minimum 8 hour period of continuous rest in the powered off state or m if any InFocus serial number has been removed or defaced In addition LCD burn in as a result of excessive display of static images on the product is not covered under the terms of this Limited Warranty Important Do not open the hardware products unless otherwise directed by InFocus for the purposes of a Customer Self Repair CSR Opening the hardware products may cause damage that is not covered by this Limited Warranty Only InFocus or an ASP
35. o the appropriate Remanufactured Product Limited Warranty or Software Product Limited Warranty for applicable Warranty information EXCLUSIONS AND LIMITATIONS This Limited Warranty applies only to the hardware products manufactured by or for InFocus and sold by InFocus its worldwide subsidiaries authorized resellers or country distributors that can be identified by the InFocus trademark trade name or logo affixed to it and to required firmware The Limited Warranty does not apply to any non InFocus hardware products or peripherals external to the InFocus branded hardware products including but not limited to external storage subsystems displays printers speakers or other peripherals or to any software applications or programs even if packaged or sold with the InFocus hard ware Manufacturers suppliers or publishers of products software or peripherals other than InFocus may provide their own warran ties to the end user purchaser but InFocus in so far as permitted by law provides their products AS IS without the InFocus Limited Warranty Software distributed by InFocus with or without the InFocus brand name including but not limited to system software is not covered under this Limited Warranty Refer to the licensing agreement accompanying the software for details of your rights with respect to its use InFocus does not warrant that the operation of the products will be uninterrupted or error free InFocus is not responsib
36. o the following directives and norms e EMC Directive 2004 108 EC o EN 55022 o EN 55024 o EN 61000 3 2 o EN 61000 3 3 e Low Voltage Directive 2006 95 EC e Safety IEC 60950 1 2005 e R amp TTE Directive 1999 5 EC Trademarks Apple Mac and Facetime are trademarks or registered trademarks of Apple Inc Microsoft Windows PowerPoint Excel and Word are trademarks or registered trademarks of Microsoft Corporation Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated HDMI logo and High Definition Multimedia Interface are registered trademarks of HDMI Licensing LLC Vidtel is a trademark of Vidtel Inc InFocus In Focus INFOCUS stylized and Mondopad are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries All other trademarks are the property of their respective owners Any other trademarks service marks personal names or product names are assumed to be the property of their respective owners and are used only for reference There is no implied sponsorship affiliation certification approval or endorsement if we use one of these terms FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of C the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment g
37. of warranty service that will prevent the hardware from reverting to an earlier version of the system software Third party applications installed on the hardware may not be compatible or work with the hardware as a result of the system software update You will be responsible for reinstalling all other software pro grams data and passwords Recovery and reinstallation of software programs and user data are not covered under this Limited War ranty RESOURCES Support and service information including Authorized Distributor and Authorized Service Provider locations is available at www infocus com support InFocus Corporation 13190 SW 68th Parkway Suite 200 Portland OR 97223 8368 USA O 2011 2012 InFocus Corp All rights reserved InFocus and the InFocus logo are trademarks of InFocus Corp registered in the U S and other countries INF5520 Hardware Guide Page 39
38. ould only be replaced with an identical or equivalent type of battery as recommended by the manufacturer Dispose of used batteries in accordance with local disposal laws INF5520 Hardware Guide Page 7 Information about this Hardware Guide Although your INF5520 comes pre installed with the Mondopad software you must first assemble the INF5520 This Hardware Guide will assist you in setting up the INF5520 After your INF5520 is fully installed please refer to the Mondopad Software Guide at www infocus com INF5520docs for more infor mation Page 8 What s Included InFocus Le Documentation Cleaning cloth Remote control batteries not included NE 2 USB cable 3M Power cords VGA cable 4M Z 5 Type A to B varies per country Sound bar L Mounting brackets Power cord 2 small and 1 large ON Feet Feet spacers set of two set of two 1920 x 1080 Mondopad collaboration tablet E Em Em Ens Security tool Thumb screws set of four L 2 Camera Stylus These items are shipped in a sepa rate box 488222 Thumb screws set of four These items are shipped in a sepa rate box 888 238 M6 Screws set of six Not included for all countries For setup purposes a keyboard and mouse are recommended For additional a
39. rces only Range 0 100 Default 50 Color adjusts the image from black and white to fully saturated color Range 0 100 Default 50 Color Temperature changes the intensity of the colors Options include Native User 5000K 6500K 7500K 9300K and 10000K default Color Control allows the user to finely adjust individual red green and blue colors Color Temperature must be set to User to access this feature Range 0 255 for each color Adaptive Contrast When set to On this feature helps enhance image contrast when displaying dark scenes Options Off default and On Picture Mode provides different preset picture modes to choose from Options include Standard default HighBright Soft and sRGB for VGA only Picture Reset resets all Picture menu items to factory default settings Options Yes and No Page 22 Screen Menu SCREEN H POSITION V POSITION CLOCK CLOCK PHASE ASPECT RATIO CUSTOM ZOOM SCREEN RESET H Position adjusts the horizontal position of the image Range 0 100 Default 50 V Position adjusts the vertical position of the image Range 0 100 Default 50 Clock adjusts the width of the image For VGA input only Range 0 100 Clock Phase adjusts the focus clarity and stability of the image For VGA input only Range 0 100 Aspect Ratio adjusts the ratio of the image width to image height Options Auto Native 4 3 and Custom Custom Zoom allows the user to adjust zoom ho
40. rizontal zoom vertical zoom horizontal position and vertical position of the image Aspect Ratio must be set to Custom to access this feature Range 0 100 for each item Screen Reset resets all Screen menu items to factory default settings Options Yes and No INF5520 Hardware Guide Page 23 Audio menu AUDIO BALANCE TREBLE BASS SPEAKER INTERNAL AUDIO SOURCE PC AUDIO RESET Balance adjusts the balance between the left and right audio outputs Range 0 100 Default 50 Treble adjusts higher pitched treble audio sounds Range 0 100 Default 50 Bass adjusts lower pitched bass audio sounds Range 0 100 Default 50 Speaker controls whether both the internal and external speakers sound bar etc or just external speakers are used Options in clude Internal both internal and external speakers operate and External only external speakers operate Default Internal Audio Source selects the audio input source Options include PC default Audio1 Audio2 and HDMI Audio Reset resets all Audio menu items to factory default settings Options Yes and No Page 24 PIP menu PIP PIP SIZE PIP AUDIO PIP RESET PIP Size changes the size of the PiP window used in the Corner to Corner configuration Options include Small default Middle and Large PIP Audio switches the audio source from the main source to the PiP source Options include Main default and Sub PIP Reset resets all PIP m
41. s Press the Menu button on the remote or keypad and go to the PiP Reset option in the PiP menu Page 26 Configuration 1 CONFIGURATION 1 AUTO ADJUST POWER SAVE LANGUAGE SCREEN SAVING COLOR SYSTEM OPERATION MODE BLANK ENABLE BLANK SCREEN TYPE ENGLISH AIO ON BLACK CONFIGURATION RESET FACTORY RESET VVAMA VAV UN Sel Adjust Enter Back Quit Auto Adjust automatically adjusts the display of an external VGA source image Press OK on the remote to activate Power Save allows the user to select whether the Mondopad goes into a standby state after no computer or video source has been detected during three consecutive search cycles Options include RGB On Off and Video On Off Default RGB On amp Video On Language switches the OSD menu language Options include English default Italian German French Spanish Polish Turkish Swedish and Simplified Chinese Screen Saving reduces the risk of image persistence Opening this submenu allows the user to select cooling fan brightness and screen shift behavior Cooling Fan When set to Auto the fan automatically adjusts based on the internal temperature of the tablet When set to On the fan remains on regardless of internal temperature Options include Auto default and On Brightness When enabled reduces brightness and disables brightness adjustment in the Picture menu Options include On and Off default ScreenShift selects the time interval for th
42. ste in all EU member states Please follow the guidance of your local MI environmental authority or ask the shop where you purchased the product for collection or recycling options Page 4 Energy Star As an ENERGY STAR Partner InFocus Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency EN ENERGY STAR is a joint program of the U S Environmental Protection Agency and the U S Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices We are proud to offer our customers products with an ENERGY STAR compliant design This product has been designed and tested to conform to the ENERGY STAR program requirement for computers at the time of manufacture By using ENERGY STAR compliant products and taking advantage of the power management features of your computer you reduce the consumption of electricity Reduced electrical consumption contributes to potential financial saving a cleaner environment and the reduction of greenhouse gas emissions For more information about ENERGY STAR go to http www energystar gov We encourage you to make efficient use of energy an integral part of your daily operations To help in this endeavor we have preset the following power management features to take effect when your computer has been inactive for a specified duration ENERGY STAR power management features Microsoft Windows 7 e Turns off t
43. support any other operating systems Touchpad functions are not function Remove all objects placed on the lip of the Mondopad display and or ing consistently within 2 of the touchpad screen e Disable PiP feature The Mondopad touchpad works best when the Mondopad collaboration software is the main image displayed e Power Mondopad off and back on after a few seconds Re booting Mondopad helps the touchpad to re synchronize Remote is not working e Make sure the batteries are installed in the proper orientation and are not dead e Verify the remote is turned on the button is on the bottom of the remote e Verify you are pointing the remote at the table and are within 26 8m and 30 degrees horz vert of the sensor e Verify that the IR Control setting in the Advanced Option OSD menu is set to Normal Keypad and or mouse is not working Make sure the batteries are installed in the proper orientation and are not dead e Press the Connect button on the bottom of the keypad e Verify the USB adapter is installed into the Mondopad s USB port e Verify that the Keyboard Control setting in the Advanced Option OSD menu is set to Unlock Video camera is not in focus e Verify that the plastic protecting the camera lens has been removed INF5520 Hardware Guide Page 31 LED Indicators Front LED PC LED Solution near IR sensor back of the tablet Off Off e The tablet is completely shut down Verify the power cord is prop
44. t is unable to detect the VGA input resolu tion correctly Options include 1024 x 768 1280 x 768 1360 x 768 1366 x 768 640 x 480 720 x 480 852 x 480 800 x 600 1064 x 600 720 x 576 1400 x1050 1680 x 1050 720 x 400 640 x 400 1440 x 900 1600 x 900 and Auto Black Level Expansion reveals additional details in black dark areas of video inputs Options include Low Middle High and Off default Gamma Selection adjusts the gamma value of the image and optimizes image brightness and contrast Options include Native 2 2 default 2 4 and S Gamma Scan Mode removes noise around the edges of a video image Options include Under scan default for VGA sources and Over scan default for video sources Scan Conversion adjusts the conversion of source images Options include Interlace and Progressive recommended Film Mode controls film mode detection and determines whether the original source of the input video was film or video Options include Auto default and Off IR Control disables and enables the IR sensor on the tablet Options include Normal default IR is enabled and Lock IR is disabled Keyboard Control disables and enables the keypad on the right hand side of the tablet Options include Lock keypad is disabled and Unlock default keypad is enabled Tiling This feature only supported in Monitor Mode Heat Status displays the current internal temperature of the Mondopad 5 and the cooling
45. tch on the Bottom Connector Panel is ON 2 Press the Power button located on either a the remote b the right side of the tablet C or the back of the tablet on the PC box The front LED turns green 3 Press the Power button again to put Mondopad into Standby The front LED turns red You can also put your tablet to sleep us ing the keyboard The front LED turns orange NOTES If the tablet becomes locked and does not respond to normal power down procedures the tablet can be powered down by pressing and holding the PC box Power button located on the back of the tablet for 7 8 seconds By default Mondopad will time out at 10 minutes and go into system standby after 20 minutes of inactivity Power settings for the Mondopad can be changed in Windows Control Panel gt Hardware and Sound gt Power Options Page 16 Setting up the Wireless Mouse and Keyboard NOTE The wireless mouse and keyboard is not included as a standard accessory for some countries For initial setup and or con figuration it may be easier to use a mouse and keyboard Any standard wired or wireless mouse or keyboard connected through the Mondopad USB ports is supported by Mondopad Wireless Mouse 1 2 Turn the mouse over and remove the battery cover Remove the USB dongle from its holder in the battery compartment of the mouse 3 Si SN 3 Plug it into a free USB A port on the Bezel Connector Panel of the tab la a let You may
46. tive part For example cleaning the heads of a floppy drive or updating revision levels of ROM BIOS on a PCA board are activities that in many instances deliver an effective repair e BIOS Firmware upgrades are not covered under the Limited Warranty Firmware that is an integral part of the option hardware board is not automatically upgraded when new versions of firmware are released e It is the responsibility of the customer to ensure that their software is compatible with the latest BIOS firmware revision This Limited Warranty does not apply a to consumable or expendable parts such as batteries or protective coatings designed to diminish over time unless failure has occurred due to a defect in materials or workmanship b to cartons carrying cases ship ping cases external cabinets accessories used in connection with the product c to cosmetic damage including but not limited to scratches dents and broken plastic on ports d to damage caused by use with non InFocus products e to damage caused by ac cident abuse misuse improper ventilation smoke exposure contamination improper or inadequate maintenance cleaning or cali bration liquid contact unusual physical or electrical stress and or power surges virus infection fire earthquake disaster lightning or other external causes f to damage caused by operating the product outside the permitted or intended uses or usage parameters described by InFocus including burned mo
47. us will pay all shipping and part return costs and determine the courier carrier to be used InFocus may utilize a doorstep swap process which involves an InFocus delivery person delivering the replacement product or CSR part to the Customer and picking up the defective product or part at the time of delivery for return to InFocus Upon receipt of the replacement product or part the original product or part becomes the property of InFocus and you agree to follow instructions including arranging the return of original product or part to InFocus in a timely manner When providing a product exchange or Customer Self Repair CSR part requiring the return of the original product or part InFocus may require a credit card authorization as security for the retail price of the replacement product or part and applicable shipping costs When returning product to InFocus a Return Material Authorization Number RMA is required and must be clearly displayed on the outside of the shipping carton or a similar package affording an equal degree of protection Service options parts availability and response times may vary according to the country in which service is requested Service options are subject to change at any time You may be responsible for shipping and handling charges if the product cannot be serviced in the country in which service is requested If you seek service in a country that is not the country of original purchase you will comply with all applica
Download Pdf Manuals
Related Search