EverFocus ECZ260 surveillance camera
Contents
1. LENS SHUTTER WHITE BAL gt BACKLIGHT AGC DNR SENS UP SPECIAL lt EXIT c HIGH The gain increases from OdB up to 42dB c MIDDLE The gain increases from OdB up to 30dB c LOW The gain increases from OdB up to 18dB gt OFF BACKLIGHT function does not operate 3 3 5 AGC Auto Gain Control 1 Please direct the arrow to point to on the SETUP menu by turning the mini joystick UP or DOWN 2 Select the mode you would like to operate by turning the mini joystick LEFT 4 or RIGHT gt The more the level of gain increases the brighter the screen and the level of noise increases as well gt HIGH The gain increases from 6dB up to 42dB c MIDDLE The gain increases from 6dB up to 30dB c LOW The gain increases from 6dB up to 18dB c OFF The gain is fixed at 6dB SETUP LENS SHUTTER WHITE BAL BACKLIGHT gt DNR SENS UP AUTO J SPECIAL lt EXIT 3 3 6 DNR Dynamic Noise Reduction Dynamic Noise Reduction in video images has the following effects 1 Images are brighter and sharper 2 When the level of noise is reduced the performance of a camera can apparently be improved 3 When it is recorded digitally reduced noise can reduce image file size 29 CHAPTER 3 OSD MENU AND CONFIGURATION As the level of gain changes the background noise in the low light level automatically decreases 1 Please direct the arrow to point to on the SETUP2. menu by turning the mini joystick UP or DOWN 2 Select the mode you would like to operate by turning the mini joystick LEFT 4 or RIGHT gt SETUP LENS SHUTTER WHITE BAL BACKLIGHT AGC gt DNR SENS UP SPECIAL lt EXIT OFF No reduction in noise level LOW Little reduction in noise level with nearly no ghost image Default value is LOW c MIDDLE Just enough reduction in noise levels without causing much ghost imaging c HIGH Huge reduction in noise level which may cause much ghost imaging NOTE When AGC is turned off DNR will be disabled 3 3 7 SENS UP SENS UP is used to keep a brilliant vivid screen image by automatically detecting changes in the level of light under low light level conditions The value is from x2 x128 1 Please direct the arrow to point to SENS UP on the SETUP menu by turning the mini joystick UP 4 or DOWN Y 2 Select the mode you would like to operate by turning the mini joystick LEFT 4 or RIGHT gt c AUTO Low light level auto mode Default value is AUTO Up to X 10 SETUP LENS SHUTTER WHITE BAL BACKLIGHT AGC DNR SENS UP AUTO J SPECIAL lt EXIT 30 CHAPTER 3 OSD MENU AND CONFIGURATION 3 Press the mini joystick when you finish all the settings NOTE D The maximum storage magnification in low light level movement situations can be adjusted by pressing the mini joystick in AUTO mode Q The screen becomes brighter
3. please switch to OSD otherwise it cannot be controlled remotely 6 Control key For setting Lens amp OSD menu 7 Cable clips Used to fix power cable and RS485 cable In addition you may order the following EverFocus products which are recommended for use with the camera to achieve the best performance e EverFocus control keyboard EKB500 e IR Illuminator and bracket CHAPTER 2 INSTALLATION Chapter Installation This chapter will describe in general terms how to install the EZ550 camera STEPS 1 Wire and mount the camera See 2 1 2 Adjust the camera position See 2 2 3 Adjust Lens See 2 3 4 Connect to Keyboard Optional See 2 4 Warning e prevent electrical shock turn off the electrical power before making electrical connections Do not expose the appliance to water or moisture nor try to operate it in wet areas 1 Wire coaxial cable power cable and RS485 cable through the bracket Note 1 Please use RG59 5C2V coaxial cable without connector 2 Use RS485 cable only if you need to control the camera by a keyboard Coaxial cable Power cable RS485 cable 13 CHAPTER 2 INSTALLATION 2 Fix the bracket to wall by using 4 screws NN Coaxial cable Power cable RS485 cable 3 Open camera s back cover Loose the 2 screws from the back panel cover then open the back cover Screws for back panel 14 CHAPTER 2 INSTALLATION 4 Take off the cap of waterproof co
4. 3 6 DNR Dynamic Noise 29 3 3 SENS UP aa d 30 3 3 8 5 La LR 31 33 9 Il CAMERA IDa co need E AEE EEE ERE E ET 31 33 8 2 COLOR E E tani rrr Rt ade E E O 32 3 3 8 3 S Y NC ee Ue ora ga ed Rue E Fue Fono vom A E ERE VETE ae ee a ee 33 3 3 9 4 MOTION DETECTION i iiri cee Sel Macatee nets Els come rad eren eode ar dua 33 323585 PRIVA GY rp NE 35 3 3 8 6 MIRROR Bic Deep epa vede eate ae Du ear Vae eed EET Tale ies Lace VERE cas 37 3 3 8 7 SHARPNESS iei Sneed cde i e ue seb ep ae Papae 37 323 88 RESET T 38 3 3 8 9 RETUR N mor Ue eor as be EU a Ko Peso epus aga te ee aea eR DE ae eae Fall Fa a TRU nee ee a 38 Mc D T EET 38 Key Feat res with Keyboard eniin erre ose e nena eas nee Grat ir eie exe or vau Vend 40 4 2 OSD Menu Setting by tret etre Ru Uer n Eee er ada E ve FR eda un 40 4 3 Lens Adjustment by Keyboard ssrin ssai nnne nau nn nne ei nhau eene nnn nna nnn 41 CHAPTER 1 PRODUCT OVERVIEW Chapter Product Overview EZ550 camera is a true day night long range IR bullet style color camera With Polestar sens up 128x it offers super sensitivity as 0 002 lux and can capture picture in the darkness Engineered with the advanced new generation 16bit DSP EZ550 has powerfu
5. AREA1 position after change is TOP 10 DOWN 45 LEFT 20 and RIGHT 40 AREA1 ia 3 Increase TOP scale value by 20 AREA1 position after change is TOP 30 DOWN 45 LEFT 20 and RIGHT 40 AREA1 34 CHAPTER 3 OSD MENU AND CONFIGURATION 4 Increase RIGHT scale value by 20 AREA1 position after change is TOP 30 DOWN 45 LEFT 20 and RIGHT 60 AREA1 5 Increase LEFT scale value by 20 AREA1 position after change is TOP 30 DOWN 45 LEFT 40 and RIGHT 60 In order to save the changes and complete the setting press the mini joystick This allows you to return to the previous menu 3 3 8 5 PRIVACY This mode covers the areas you do not want to see on the screen 1 Please direct the arrow to point to PRIVACY by turning the mini joystick UP or DOWN Y 2 Select ON by turning the mini joystick LEFT 4 or RIGHT 5 3 Press the mini joystick SPECIAL PRIVACY CAMERA ID COLOR ADJ lt SYNC MOTIION DET gt AEREA SEL AREA1 AREA STATE OFF AREA TONE 80 gt PRIVACY MIRROR SHARPNESS RESET RETURN lt TOP 10 25 20 4 40 Please select the area you would like to cover from the 4 areas in AREA SEL mode Please select ON mode for the chosen area Please select AREA TONE for cover area color The smaller the number the darker the color Please turn the mini joystick UP 4 or DOWN to m
6. Dimension of whole camera with bracket 275mm 10 8 P 107 5mm 4 3 243 5mm 9 74 357mm 14 CHAPTER 1 PRODUCT OVERVIEW 1 5 Camera Component Description Sun shield Fixing screw for sunshield Powet connector RS485 terminal Video output Control key selection switch Control key EZ550 Component description CHAPTER 1 PRODUCT OVERVIEW 24VAC model for 24VAC 110V 240VAC model for Power Only 110V 240V Power only 1 Video Output Connector Connect the video output of the camera to a color monitor or other video devices through a 75 Ohm type coaxial cable with BNC female connector at backside of the camera 2 Power Input Terminal Connect the appropriate power to each model N L is used to connect to power in PE is a ground pin 3 RS 485 communication and External IR power control pin PIN definition a TXD RS485 for keyboard controlling b RXD RS485 for keyboard controlling 4 Power for IR illuminator Referring to above figure pin 12VDC and GND are defined as below a GND Ground b 12VDC provide power source for IR illuminator IR illuminator is optional CHAPTER 2 INSTALLATION 5 Control key selection switch Switch to OSD to control OSD menu by using the control key or switch to LENS to adjust zooming and focus please see 2 3 1 Lens setting and 3 OSD Menu amp Configuration for details Note when it is connected to RS485 for keyboard control
7. LIGHT AGC DNR SENS UP SPECIAL lt EXIT 3 3 1 LENS 1 When the SETUP menu is displayed on the screen please direct the arrow to point to LENS by turning the mini joystick UP 4 or DOWN Y Press the mini joystick to adjust IRIS level the higher is brighter In most cases you don t need to adjust this since Lens 15 Auto Iris supported SETUP gt LENS SHUTTER WHITE BAL BACKLIGHT LENS LEVEL 25 AGC DNR SENS UP SPECIAL lt EXIT NOTE Since DC lens is a built in lens for EZ550 camera it does not support Manual lens please do not select lens as Manual mode it disables sens up and may cause malfunction of lens 2 Please press the mini joystick for saving setting and return to the previous menu 3 3 2 SHUTTER 1 When the SETUP menu is displayed on the screen please direct the arrow to point to SHUTTER by turning the mini joystick DOWN V 2 Select the shutter mode by turning the mini joystick LEFT 4 or RIGHT gt Three modes ate available FLK ESC and Manual 26 CHAPTER 3 OSD MENU AND CONFIGURATION NOTE Since DC lens is a built in lens for EZ550 camera shutter does not support ESC and Manual functions ESC and Manual are reserved functions please do not select these two options in normal situation gt FLK Please select FLK mode when flickering occurs the screen which is caused by an irregular balance between illumination and frequency NTSC
8. Volume f EverFocus Operation Instruction 1 3 CCD Polestar True Day Night Weatherproof IR Camera with 6 50mm Lens and RS485 Control EZ550 EVERFOCUS ELECTRONICS CORPORATION P N MZ55G00200 Ver B Operation Instruction 2008 EverFocus Electronics Corp Please read this manual first for correct installation and operation This manual should be retained for future reference The information in this manual was current when published The manufacturer reserves the right to revise and improve its products All specifications are therefore subject to change without notice All rights reserved No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the EverFocus Electronics Corporation Precautions 10 11 12 Do not place any object on top of the cover Be careful when handling the camera do not drop it or subject it to strong shock or vibration to prevent any damages to it Do not disassemble it or place it on an unstable base Install the camera away from TV radio transmitter magnet electric motor transformer audio speakers because the magnetic fields generate from above devices will distort the video image Install the camera away from stoves or other heat generating devices as the high temperature could cause deformation discoloration or other damages of the camera Install the camera at where the temperature range will stay be
9. ck left 4 or right amp to adjust the mode or parameter of settings V Switch to Sub menu Screens 21 CHAPTER 3 OSD MENU AND CONFIGURATION When the item with sub menu is selected press the mini joystick to switch to the sub menu for further settings Please refer to the diagram below SETUP gt LENS SHUTTER WHITE BAL BACKLIGHT LENS LEVEL 25 AGC DNR SENS UP SPECIAL lt EXIT NOTE For those selected items with qf sign in the end they have the sub menu for further g y settings VI Return to Previous Page Press the mini joystick to return to previous page VII Close the Host Menu Screen To close the menu screen navigate to the EXIT item and press the mini joystick 22 CHAPTER 3 OSD MENU AND CONFIGURATION Note This section is optional preserved for the people that want to change camera ID and baud rate In most situations we suggest you can just use Camera ID 99 and Baud Rate 9600 Protocol Pelco D on keyboatd then it would work I Please turn the control key selection switch at back panel to OSD 4 II Press the mini joystick for 4 seconds until you see the following menu ABCDEFGHIJKL NOPQRSTUVWXY abcdef ghi j Turn the mini joystick up or down Y to adjust setting press mini joystick to go next selection IV Please wait 3 seconds after setting any item it will automatically switch to next setting item V Camera setti
10. e 4 directional buttons to find the desired position to display the name 6 If you would like to cancel the ID inputted please move the cursor to CLR and all the letters inputted will be deleted 7 Select END and press the mini joystick to complete ID input SPECIAL gt CAMERA ID ON COLOR ADJ lt SYNC INT MOTIION DET OFF PRIVACY OFF MIRROR OFF SHARPNESS JH RESET RETURN lt 3 3 8 2 COLOR ADJ Adjust the Color Gain from 0 15 SPECIAL CAMERA ID OFF COLOR GAIN gt COLOR ADJ lt 4 SYNC INT gt LEVEL 8 MOTIION DET OFF PRIVACY OFF MIRROR OFF SHARPNESS lt RESET RETURN lt 32 CHAPTER 3 OSD MENU AND CONFIGURATION 3 3 8 3 SYNC There are two SYNCHRONIZATION modes INTERNAL and EXTERNAL LINE LOCK In LINE LOCK mode without a synchronous generator it synchronizes the video signal between cameras The Line Lock synchronization is only used in the places of 60Hz NTSC models or 50Hz PAL models INT Internal synchronization LL External line lock synchronization gt f you choose LL you can adjust the phase your wish to set Then press the mini joystick You can adjust the phase you wish to set from 0 to 359 SPECIAL CAMERA ID OFF COLOR ADJ lt 4 gt SYNC LL lt MOTIION DET OFF SYNC PHASE 0 PRIVACY OFF MIRROR OFF SHARPNESS ON J RESET RETURN lt 3 3 8 4 MOTION DETECTION EZ550 enables you to observe m
11. elektronische Ger te am Ende ihrer Nutzungsdauer vom Hausm ll getrennt entsorgt werden sollen Bitte entsorgen Sie dieses Ger t bei Ihrer rtlichen kommunalen Sammelstelle oder im Recycling Centre Helfen Sie uns bitte die Umwelt zu erhalten in der wir leben EverFocus
12. g able to control keyboard make sure Keyboard RS485 camera ID Baud rate match the camera see COM port setting in EKB500 manual EZ550 camera ID default is 99 Baud rate is 9600 Support Protocol EVF 1 EVF 2 and Pelco D 4 1 Key Features with Keyboard 1 OSD can be set up from Keyboard 2 Lens Zoom and Focus can be controlled by keyboard 4 2 OSD Menu Setting by Keyboard a Ptess to enter SETUP menu b Move the joystick UP and DOWN Y This allows you to move between selection items in setup menu c If the item has sub menu setting sign eii press Menu again to display the sub menu SETUP gt LENS DC SHUTTER an WHITE BAL ATW 40 CHAPTER 4 CONTROL FROM KEYBOARD Move the joystick RIGHT gt and LEFT 4 to adjust the mode and parameters of the selected item e Press Menu to leave and goes to previous menu after setting Move to exit and press menu button when you finish all settings f For detail setting and every setup function Please refer to 3 3 OSD Menu Setup 1 Press Zoom in or Zoom out to adjust zoom or Turn Joystick clockwise to zoom out Counterclockwise to zoom in 2 Press Focus N or Focus F to adjust focus 3 Press Iris and Iris to adjust Iris 41 EverFocus Electronics Corp Head Office 12F No 79 Sec 1 Shin Tai Wu Road Hsi Chih Taipei Taiwan TEL 886 2 26982334 FAX 886 2 26982380 www everfocus co
13. he wire when connecting the power supply to the camera b Connect Video Make sure connecter is firmly connected c Connecting RS485 optional Connect RS585 cable to 485 and 485 Please use screw driver to lose and tight the screw on the RS485 terminal pin when you do connection Power cable RS485 cable Coaxial cable Cable Clips Cable Clips CHAPTER 2 INSTALLATION 10 Close the back cover and screw the 2 screws firmly Now you are done with the installation NOTE Before you close the cover please make sure control key is attached firmly and wite doesn t stuck Screws for back panel Adjust camera s angle vertically or horizontally by using hex key included in package Loose this screw to make angle adjustment vertically 18 CHAPTER 2 INSTALLATION Loose this screw to make angle adjustment horizontally 2 3 Adjusting Lens Open camera s base a control key is attached at inner side of the base Detach the control key and use this key for OSD or Lens setting 2 3 1 Lens Setting Please turn the control key selection switch at the back panel to Lens Use the control key to do lens setting 19 CHAPTER 2 INSTALLATION The Cursors amp the mini joystick Turn the mini joystick Up 4 or Down to adjust zoom in zoom out Turn the mini joystick Left 4 or Right to adjust focus f v v k Conr tion INC LUI Ii LIUII Please refer t
14. l processing capability to perform super high resolutions Designed with 3 Axis bracket you can position camera at any view angle you like With built in DNR Dynamic Noise Reduction the EZ550 camera provides crystal clear images in low light conditions and 70 of substantial disk saving storage This bullet style camera supports RS485 remote control and has an external controller for 6 50mm auto Iris lens and OSD setting e 1 3 SONY Super HAD CCD with super high resolution e Sens up 128x e Built in motor controller for 6 50mm auto Iris lens zoom and focus e 3 Axis Bracket True Day Night feature with IR Cut Filter Removable e OSD setting menu and RS485 remote control e IR distance up to 50 meters about 164 ft and Vari Frequency IR control e Utilizes the advanced 16 bit Digital Signal Processor DSP for crystal clear images e Built in DNR Dynamic Noise Reduction for noise reduction and 70 saving of disk storage e Built in heater for applications in low temperature environment e Tamper proof cable wires are placed inside the bracket to prevent intentional destruction e IP66 weatherproof and vandal proof CHAPTER 1 PRODUCT OVERVIEW s Please be careful when you unpack the box due to the electronics devices inside Check and make sure that you have all the items listed below inside the original box Camera Unit x 1 Waterproof conduit x 1 connected to the camera bottom Bracket x 1 Operation Manual x 1 Mounti
15. m tw USA L A Office 1801 Highland Ave Unit A Duarte CA 91010 U S A TEL 1 626 844 8888 FAX 1 626 844 8838 www everfocus com USA N Y Office 415 Oser Avenue Unit S Hauppauge NY 11788 TEL 631 436 5070 FAX 631 436 5027 www everfocus com Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and This symbol means that electrical and electronic equipment at their end of life should be of separately from your household waste Please dispose of this equipment at your 1081 community waste collection recycling European Union there separate collection systems for used electrical and electronic product Please help us to conserve the environment we live in Europe Office Albert Einstein Strasse 1 D 46446 Emmerich Germany TEL 49 2822 9394 0 www everfocus de China Office Room 609 Technology Trade Building Shangdi Information Industry Base Haidian District Beijing China 10085 TEL 86 10 62973336 37 38 39 FAX 86 10 62971423 www everfocus com cn Japan Office 1809 WBG MARIBU East 18F 2 6 Nakase Mihama ku Chiba city 261 7118 Japan TEL 81 43 212 8188 FAX 81 43 297 0081 www everfocus com Ihr EverFocus Produkt wurde entwickelt und hergestellt mit qualitativ hochwertig Materialien und Komponenten die und wieder verwendet werden Dieses Symbol bedeutet dass elektrische und
16. mage becomes cleaner and more distinguishing as the level of SHARPNESS increases If the level goes up extremely it may affect the video image and cause noise ON Enable the SHARPNESS mode 37 CHAPTER 3 OSD MENU AND CONFIGURATION OFF Disable the SHARPNESS mode Please press the mini joystick The available range of level is 0 31 SPECIAL CAMERA ID OFF COLOR ADJ lt 4 SYNC INT MOTIION DET OFF SHARPNESS gt LEVEL tt 4 8 PRIVACY OFF MIRROR OFF gt SHARPNESS lt RESET RETURN lt 3 3 8 8 RESET Press the mini joystick on RESET for 3 seconds until it restarts It will go to factory default value SPECIAL CAMERA ID OFF COLOR ADJ SYNC INT MOTIION DET OFF PRIVACY OFF MIRROR OFF SHARPNESS J gt RESET RETURN lt 3 3 8 9 RETURN Press the mini joystick on RETURN It saves all settings in SPECIAL menu and returns to the Setup menu SPECIAL CAMERA ID OFF COLOR ADJ lt 4 SYNC INT MOTIION DET OFF PRIVACY OFF MIRROR OFF SHARPNESS JH RESET gt RETURN lt 3 3 9 EXIT Press the mini joystick on EXIT after you finish all the settings It will return to live image NOTE If you quit the Menu without pressing EXIT all the settings you previously did will NOT be saved CHAPTER 3 OSD MENU AND CONFIGURATION 39 CHAPTER 4 CONTROL FROM KEYBOARD Chapter Control from Keyboard EKB500 Optional Note Before bein
17. model 1 100 PAL model 1 120 SETUP LENS MANUAL gt SHUTTER FLK WHITE BAL ATW BACKLIGHT OFF AGC MIDDLE DNR LOW SENS UP SPECIAL lt EXIT c ESC Reserved SETUP LENS gt SHUTTER WHITE BAL BACKLIGHT MANUAL BRIGHTNESS ESC J ATW OFF BRIGHTNESS 25 AGC MIDDLE DNR LOW SENS UP AUTO lt SPECIAL lt EXIT c Manual Reserved SETUP SHUTTER LENS MANUAL SHUTTER MANUAL lt gt MANUAL 1 50 WHITE BAL ATW BACKLIGHT OFF AGC MIDDLE DNR LOW SENS UP SPECIAL lt EXIT 3 Press the mini joystick when you finish all the settings NOTE D With DC lens the shutter speed is fixed as 1 60 for NTSC and 1 50 for PAL 27 CHAPTER 3 OSD MENU AND CONFIGURATION 3 3 3 WHITE BALANCE control The screen color can be adjusted by using the WHITE BALANCE function 1 Please direct the atrow to point to WHITE BAL on the SETUP menu by turning the mini joystick UP 4 or DOWN Y 2 Please select the mode you would like to operate by turning the mini joystick LEFT 4 or RIGHT gt Please select one of the 3 modes below c ATW Auto Tracking White Balance This mode can be used within the color temperature range from 2 500 K to 8 300 K eg fluorescent light outdoor sodium vapor lamp or inside tunnels c AWC Auto White Balance Control Press mini joystick while the camera is directed at a piece of white paper to get the optimum state under the prese
18. nduit which is at the camera bottom Power cable 10 3 Coaxial cable RS485 D6mm D5mm Note 1 the holes of waterproof conduit were plugged please remove the plug when you need to use it for connection 5 Take coaxial cable power cable and RS485 cable to pass through waterproof conduit place them into camera housing Note Do not connect BNC connector to coaxial cable until coaxial cable has passed through camera housing otherwise your cable might not pass the housing 15 CHAPTER 2 INSTALLATION OBB BEEBE Coaxial cable Power cable RS485 cable Note 1 Power cable s diameter must be less than 10 mm 2 Only use RG59 5C2V for Video cable 3 RS485 cable must be less then 5 mm 6 Close the waterproof cap and fix waterproof conduit to the base of camera firmly 16 CHAPTER 2 INSTALLATION 7 Fix the camera body to bracket by using the 4 shorter screws 8 Connect RG59 coaxial cable with BNC connectot 9 Unscrew both cable clips wire power cable and RS485 cable through the cable clips Then screw the cable clips to rear panel a Connecting Power 24VAC model connect 24VAC power on N and L 100VAC 240VAC Model Connect PE N and L Warning prevent electrical shock turn off the electrical power before making electrical connections e Do not connect high voltage power to the camera It may damage the camera e Do not short circuit the power leads and expose t
19. ng kit includes Long Screws x 4 for mounting bracket Short Screws x 4 for connecting camera body to bracket Expanding Screws x 4 Hex key x 1 for adjusting bracket Hexagon wrench x 1 for adjusting sunshield Please Note If an item appears to have been damaged in shipment replace it properly in its carton and notify the shipper If any items are missing notify your EverFocus Electronics Corp Sales Representative or Customer Service The shipping carton is the safest container in which the unit may be transported Save it for possible future use CHAPTER 1 PRODUCT OVERVIEW 1 3 Specifications Picture Elements 768 x 494 NTSC 752 x 582 PAL Scanning System NTSC 525 TV lines 60 fields sec PAL 625 TV lines 50 fields sec Video Output BNC 1 0Vp p 75 ohm Sensitivity 0 002 Lux F 1 2 IR Off SENS UP 128x 0 Lux IR On True Day Night Yes Black Light Comp Yes OFF Low Mid Hi Digital Noise Reduction Yes OFF Low Mid Hi Power Consumption 100VAC 240VAC 18W max 24VAC 20W max Operating Temperature 40 C 50 C 40 F 122 F 20 80 Humidity IR Distance 50M 164 feet Certifications FCC CE CHAPTER 1 PRODUCT OVERVIEW 275mm 10 8 45 115mm 4 5 Unit mm inch Drilling Dimension of holes to holes L 80mm 3 2 E Dimension of Bracket 220 5mm 8 68 84mm 3 31 106 5mm 4 19 112 7mm 4 44 199mm 7 83 CHAPTER 2 INSTALLATION
20. ng order a Firmware version VER_xxx shows the current firmware version 23 CHAPTER 3 OSD MENU AND CONFIGURATION ABCDEFGHIJKLM NOPQRSTUVWXYZ k FI RMWARE VER b RS485 ID adjustable 01 99 Default value is 99 Move joystick RIGHT and LEFT to adjust it RS485 ID of EZ550 has to be the same as Keyboard s CAM ID ABCDEFGHIJK NOPQRSTUVWX abcd ghi j k t uv wx 0 34567 BAUD RATE adjustable 9600 4800 2400 and 1200 Default value is 9600 Move joystick RIGHT and LEFT to adjust it Baud rate of EZ550 has to be the same as Keyboard s baud fate 24 CHAPTER 3 OSD MENU AND CONFIGURATION d DATA STORED Confirm with you that the last 3 settings you have made will be saved ABCDEFGHIJK NOPQRSTUVWX abcdefghi j k nopqrst uvwx 01234567 gt CLR POS DATA STORED _ Note For Camera Protocol EZ550 recognizes EVF 1 EVF 2 and Pelco D protocols automatically No setting is required After setting it will show an OSD menu to save setting go to exit menu and press mini joystick Note Camera ID and Baud rate setting can only be performed locally NOT from Keyboard 25 CHAPTER 3 OSD MENU AND CONFIGURATION Please make sure control key selection switch is at OSD position Note Unlike setting Camera ID that requires you to press 3 seconds OSD menu only requires one click less than 1 second and you should see the following menu SETUP gt LENS SHUTTER WHITE BAL BACK
21. ns 3 1 4 DimerstOns uoo eta ovina eee mn vendo xta teo hates rea 4 1 5 Camera Component DESC ri PtlOn Mine van ered need vene kic Du ree ae er RE 6 1 6 Back Panel Layout esee eren ripetere pe a EA eE a n Mu er eu rund 7 TT Related Products mice rere ter meon recte o ror oaa Federn io Morin ua periere nv efter Seven uo ribs ER e UR 8 2 1 Wiring arid io oso textes eene re Fee o ques Sepa dec taney AME KU er RYE EE MER Ur ae 13 2 2 Adjusting Camera Positionh re rore pepe ere err esse torpe rd 18 2i3 Adj sting E 19 2 3 L L ns Settltlg soreang et oe eren oo FR nodes uus oes ede e dva xeu Vrat td d alu Pode un Er UT NEA tere 19 2 4 Keyboard Connection 20 3 T Control Key General Operation Guilde eet erre keep rove Fa ien x uo roto rex orn 21 3 2 B85485 1D amp Baud Rate Setting eec meer ex er ea OC REPRE 23 3 3 0S DM eiu Setups ors toas teris ser otio T Lc D NULLO P S DNI EUER DIT irs 26 Sti ems 26 3 3 2 SHUTTER ante ech Rega RENE Paik Roh Deedee ape nia TT ee Pe 26 3 3 2 WHITE BALANCE Controls on Sinai ep ee ad ee ae 28 T 28 3 3 5 6 Auto Gain Control niio aa 29 3
22. nt illumination If the environment and the light source are changed you need to adjust the white balance again c MANUAL The manual adjustment mode enables a more precise adjustment Please select ATW or AWC first Then change to manual adjustment mode and press mini joystick Set the suitable color temperature and increase or decrease the red and blue color values at the same time while checking the color changes of the object SETUP LENS DC lt WHITE BAL SHUTTER i gt WHITE BAL MANUAL lt 32 BACKLIGHT OFF t 4 39 AGC DNR SENS UP SPECIAL lt EXIT NOTE Under the following conditions the WHITE BALANCE function may not operate well In such cases please select the AWC mode D When the object s surroundings have a high color temperature Q When the object s surroundings are dark If the camera faces a fluorescent light directly or is installed in a place where the illumination changes constantly the WHITE BALANCE function may become unstable 3 3 4 BACKLIGHT Even there 15 a massive backlight behind the object bright images of the background and the object can still be obtained by using the BACKLIGHT function 1 Please direct the arrow to point to BACKLIGHT on the SETUP menu by turning the mini joystick UP 4 or DOWN Y 28 CHAPTER 3 OSD MENU AND CONFIGURATION 2 Select the mode you would like to operate by turning the mini joystick LEFT 4 or RIGHT gt SETUP
23. o Chapter 4 for more details of Keyboard control 1 Connect the cable from keyboard s RS485 port to camera s RS485 port Keyboard is an optional accessory RS485 connecting accessories are included in Everfocus Keyboard package 2 Connect the cable from video output jack of the camera to monitor s input jack 20 CHAPTER 2 INSTALLATION 3 EZ550 recognizes EVF 1 EVF 2 and Pelco D protocols automatically No setting is required 4 The camera default RS485 ID is 99 BAUD RATE is 9600 Make sure the key board camera ID and Baud rate match For optional changing camera ID and baud rate on camera please refer to 3 2 5 For keyboard setting and operation please see chapter 4 21 CHAPTER 3 OSD MENU AND CONFIGURATION Chapter OSD Menu amp Configuration This chapter introduces how to configure the camera OSD menu N N Please turn the control key selection switch at the back panel to OSD Use the control key to do OSD menu setting VIDEO Mini Joystick The Cursors amp the mini joystick I Bring Up the General OSD Menu Simply press the mini joystick to bring up the general OSD menu II Bring up the RS485 Setting Menu Press the mini joystick and hold for 5 seconds to bring up the RS485 setting menu III Navigate among the OSD Menu Items Turn the mini joystick up or down to move the cursor up or down IV Change Modes or Setting Parameters Turn the mini joysti
24. ove between TOP DOWN LEFT and RIGHT for adjusting the size of the area to be covered 35 CHAPTER 3 OSD MENU AND CONFIGURATION Please turn the mini joystick LEFT 4 or RIGHT P to adjust the value for size X Additionally it is possible to change the position of the area to be covered Please refer to the following example for detailed steps on moving AREA1 to center 1 The original position of AREA1 was TOP 10 DOWN 25 LEFT 20 and RIGHT 40 AREA1 2 Increase DOWN scale value by 20 AREA position after change is TOP 10 DOWN 45 LEFT 20 and RIGHT 40 AREA1 B 3 Increase TOP scale value by 20 AREA1 position after change is TOP 30 DOWN 45 LEFT 20 and RIGHT 40 AREA1 36 CHAPTER 3 OSD MENU AND CONFIGURATION 4 Increase RIGHT scale value by 20 AREA position after change is TOP 30 DOWN 45 LEFT 20 and RIGHT 60 AREA1 5 Increase LEFT scale value by 20 1 position after change 1s TOP 30 DOWN 45 LEFT 40 and RIGHT 60 AREA1 In order to save the changes and complete the setting press the mini joystick This allows you to return to the previous menu 3 3 8 6 MIRROR ON Sets a horizontal image 180 angel inversion OFF Disable the inversion SPECIAL CAMERA ID OFF COLOR ADJ lt 4 SYNC INT MOTIION DET OFF PRIVACY OFF gt MIRROR OFF SHARPNESS lt RESET RETURN lt 3 3 8 7 SHARPNESS The contour of the video i
25. ovements of objects in 4 different places on the screen the message MOTION DETECTED appears on the screen when movement is detected therefore this helps to improve supervision efficiency The camera detects an object s movement by sensing discrepancy of outline 1 Please direct the arrow to point to MOTION DET by turning the mini joystick UP or DOWN 2 Select ON by turning the mini joystick LEFT 4 or RIGHT 3 Press the mini joystick SPECIAL MOTION DETECTION CAMERA ID OFF COLOR ADJ lt 4 SYNC gt MOTIION DET gt AEREA SEL AREA1 AREA STATE ON TOP 10 PRIVACY MIRROR SHARPNESS JH RESET RETURN lt DOWN 25 LEFT 20 RIGHT 40 Press SET to return Please select the area you would like to detect from the 4 areas in AREA SEL mode Please select ON mode for the chosen area Please turn mini joystick UP 4 or DOWN to move between TOP DOWN LEFT and RIGHT for adjusting the size of the area Please turn mini joystick LEFT 4 or RIGHT to adjust the value for size of the area 33 CHAPTER 3 OSD MENU AND CONFIGURATION Additionally it is possible to change the position of the area Please refer to the following example for detailed steps on moving AREAT to center 1 The original position of AREA1 was TOP 10 DOWN 25 LEFT 20 and RIGHT 40 AREA1 2 Increase DOWN scale value by 20
26. tween 40 C to 50 40 F to 122 Never aim the camera at the sun or other extremely bright objects whether it is in use or not Do not touch the surface of CCD sensor by hand directly Use a soft cloth to remove the dirt from the camera body Use lens tissue or a cotton tipped applicator and ethanol to clean the CCD sensor and the camera lens When the camera is not in use put the cover cap on the lens mount All warnings on the products and in the operating instructions should be adhered to Do not use attachments not recommended by the appliance manufacturer as they may cause hazards Do not allow anything to rest on the power cord Do not locate this appliance where the cotd will be abused by persons walking on it Do not ovetload wall outlets and extension cords as this can result in fire electric shock Never push objects of any kind into his appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in fire or electric shock Refer all work related to the installation of this product to qualified service personnel or system installers Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates
27. uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to tty to correct the interference by one of the following measutes Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected E Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Table of Contents DET C trie ete death reek mates po S 1 Te2 AGCESS ORY Parts bici M 2 1 3 Specifications epi ue re bep clare e e oa eser ear
28. when the magnification increases yet the after image increases as well Please be noted that spots and noise may appear if storage magnification increases when SENS UP is operating This is a normal phenomenon 3 3 8 SPECIAL 1 Please direct the arrow to point to SPECIAL on the SETUP menu by turning the mini joystick UP 4 or DOWN Y SETUP LENS SHUTTER WHITE BAL BACKLIGHT AGC DNR SENS UP gt SPECIAL lt EXIT 2 Select the mode you would like to operate by turning the mini joystick LEFT 4 or RIGHT gt SPECIAL gt CAMERA ID OFF COLOR ADJ lt 4 SYNC INT MOTIION DET OFF PRIVACY OFF MIRROR OFF SHARPNESS ON lt RESET RETURN lt 3 3 8 1 CAMERA ID Input the camera ID and it will be appeared on the monitor 1 Please direct the arrow to point to CAMERA by turning the mini joystick UP 4 or DOWN v 2 Select ON by turning the mini joystick LEFT 4 or RIGHT gt 31 CHAPTER 3 OSD MENU AND CONFIGURATION 3 Press the mini joystick 4 Maximum 15 letters can be used for the ID gt Turning the mini joystick UP DOWN LEFT 4 or RIGHT P to select the letters gt Press the mini joystick to lock in the letters 5 Once a name has been selected please choose a position where you would like to display the name gt Move the cursor onto POS and press the mini joystick gt The name will appear at the top left hand corner gt Please use th
Download Pdf Manuals
Related Search