Premier Mounts RFM flat panel wall mount
Contents
1. Qty 8 Mo x 20 6 x 45 M8 x 25 Qty 8 M8 x 30 M8 35 Ms x 45 Ms x 70 REM Qty 8 Installation Instructions A Note The nylon spacers may be stacked to achieve proper spacing 1 4 Nylon spacers 9 16 Nylon spacers large Qty 8 Qty 8 1 2 Nylon spacers large Nylon sleeves Qty 12 Qty 8 5 16 Flat washers metal Qty 8 1 Nylon Spacers Qty 8 1 O3 1 4 Nylon spacers small Oty 8 Installation Instructions Page 5 b 4 2 Thread Depth Indicator 1 Insert the thread depth indicator supplied through the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it Figure 1 2 Locate the correct diameter screw for the thread insert Compare your marking to the screws supplied 3 If your selected screw is longer than the marking on the thread depth indicator DO NOT USE this screw 4 The screw length must not bypass the marking Select another screw size Figure 2 and 3 until you find one that comes closest to your mark without going past e zu SEU Inverted Flat Panel Display Marking the J Depth 7 Thread Insert2. PREMIER Cag MOUNTS The original holding company INSTALLATION INSTRUCTIONS Rotary Flat Mount Model RFM AUSTRALIA NEW ZEALAND OCEANIA NORTH AMERICA EUROPE DISTRIBUTOR 3130 East Miraloma Avenue Swallow House P O Box 295 USA Shilton Industrial Estate Mordialloc Victoria 3195 e 0 Shilton Coventry England CV79JY Australia Phone 800 368 9700 Fax 800 832 4888 Phone 44 0 2476 614700 Phone 039586 6330 Fax 44 0 2476 614710 WWW premiermounts com au Other Locations Phone 001 714 632 7100 Fax 001 714 632 1044 Premier Mounts 2008 9531 009 041 03 Contact Premier VOUS 2 LIB EHE IIIS 0 ete 0 0 E N E E 3 PoE VO O O XO YX Y 4 4 7 8 9 Universal Mounting Bracket 9 11 Technical 11 12 Warning Statements PRIOR TO THE INSTALLATION OF THIS PRODUCT THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS AN
3. must be rotated to the portrait position vertical position 8 Tighten the two 2 Phillips head screws located on the side of the mounting block once the final position is attained Installation Instructions Page 9 4 58 Display Orientation The RFM will allow the user to adjust the display a full 360 BEFORE ROTATING THE RFM MAKE SURE THAT THE M6 KNURL KNOB IS SECURELY FASTENED WARNING TO THE RFM ALSO PLEASE MAKE SURE YOU ALLOW ENOUGH CABLE AND WIRE CLEARANCE FOR FULL ROTATION M6 Knurl Knob 1 To adjust the RFM rotate the display either clockwise or counter clockwise 2 Tighten the Phillips head locking screws see Step 8 Page 10 Technical Specifications All measurements are in inches mm 944 88 18 00 457 2 16 00 94 74 406 4 12 00 304 8 ey fe dE s 25170 533 4 Er Page 10 Installation Instructions 4 PA Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product The limited warranty is valid only for the original purchaser of the product What Premier Mounts Will Do At the sole option of Premier Mounts Premier Mounts will repair or replace any product or product part that is defective If Premier Mounts cho
4. Thread Depth Indicator 221777277717777777117220 B screw Marking Thread Depth Thread Depth Indicator Indicator Page 6 Installation Instructions 4 21 Mount Installation Step 1 Step 2 Step 3 Determine where the lo Once the stud has been located use a pencil Using a 1 4 drill bit drill the upper mount cation will be Use a stud finder to mark the spot ing hole where the mark was made to locate the nearest wall stud For ease of installation it is recommended that two people perform the installation One person should hold the A Note mount while the other person installs the lag bolt and washer Making sure that the mount is level the person not holding the mount must mark and drill the second mounting hole and secure the second lag bolt and washer Step 4 Step 5 Step 6 After the holes have been pre drilled Insert two 2 5 16 x 3 lag bolts Place a level supplied on the top line up the mounting slot openings and washers into the mounting holes rail and make sure that the mount is with the pre drilled holes and tighten see WARNING below level Once the mount is level Drill pilot holes in the lower mounting slots and install two 2 5 16 x 3 lag bolts and washers into the mount ing holes and tighten A WARNING Do NOT over tighten lag bolts when attaching the mount to the wall Improper installation may result in personal injury or damage to property If the studs
5. surface This product is intended for indoor use only Use of this product outdoors could lead to product failure and personal injury Do not install near sources of high heat Do not install on a structure that is prone to vibration movement or chance of impact Contact Premier Mounts with any questions 800 368 9700 techsupport 2 mounts com 6 09 Installation Instructions 4 I RFM 24 Parts List This mount is shipped with all installation hardware and components Make sure that none of these parts are Note missing and or damaged before beginning installation If there are parts missing and or damaged please stop and contact Premier Mounts 800 368 9700 A niversal Mounting Brackets Qty 2 Rotating Universal Bracket Bar Qty 1 lt P KY KD KD 5 16 x 3 Lag Bolts wooden studs 5 16 Flat Washers M6 Knurl Knob Griplate Qty 8 only Qty 6 Qty 6 Qty 1 Installation Tools Phillips Head Screw Driver Soft Material Blanket 1 2 Socket and Wrench Pencil Tape Measure Drill Gun Level Supplied 5 Allen Wrench Supplied 5 32 Allen Wrench Supplied 1 4 Drill Bit Pilot Holes Thread Depth Indicator Supplied Masonry Drill Bit Concrete Applications Commercially Available Installation Instructions Page 3 MA x 16 MAX 25 M5 x 12 M5 x 16 M5 x 20 5 25 5 50 M6 x 16 Page 4
6. D IS NOT RESPONSIBLE FOR ANY DAMAGES CLAIMS DEMANDS SUITS ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM ARISING OUT OF OR IN ANY MANNER RELATING TO ANY SUCH USE ATTACHMENTS OR MODIFICATIONS THE SURFACE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF THE DISPLAY IF NOT THE SURFACE STRUCTURE MUST BE REINFORCED THE MAXIMUM WEIGHT THAT CAN BE USED WITH THIS PRODUCT IS 160LBS PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN AS OUTLINED IN THE INSTALLATION INSTRUCTIONS MUST BE ADHERED TO FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY OR EVEN DEATH SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT USE PROPER SAFETY GEAR AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY At least two qualified people should perform the assembly procedure Injury and or damage can result from dropping or mishandling the display If mounting to studs make sure that the mounting screws are anchored into the center of the studs Use of an edge to edge stud finder is recommended Be aware of the mounting environment If drilling and or cutting into the mounting surface always make sure that there are no elec trical wires in wall Cutting drilling into an electrical line may cause serious injury Make sure there are no water lines inside the wall where the mount is to be located Cutting drilling into a water line may cause severe water damage to the mounting
7. are 12 304 8mm apart use three 3 3 76 2mm lag bolts for the top rail and three 3 3 76 2mm A Note lag bolts for the lower rail If the studs are 16 406 4mm 18 457 2mm 24 609 6mm apart use two 2 3 lag bolts for the top rail and two 2 3 lag bolts for the lower rail Installation Instructions Page 7 b 4 Oe EL Concrete Mounting Note Concrete anchors must be used for concrete installation They can be purchased at your local hardware store The mounting surface must be a minimum 6 thick Begin by placing the mount into position against the wall keeping it level Mark off four holes to be used for securing the mount Next drill holes using a masonry bit for your anchors recommended masonry bit Insert a commercially available concrete anchor into each hole recommended 3 8 wedge anchors If necessary a hammer can be used to lightly tap each anchor into place so that they are flush with the wall Once all of the anchors are in place move the wall bracket into position Attach the nut onto the threaded shaft that is protruding from the wall Do not tighten until all nuts are in place Se ee Universal Mounting Bracket Assembly l Place the universal bracket bar and the universal brackets on a flat surface 2 Slide the universal brackets onto the universal bracket bar as shown below with the set screws facing up At this time do not tighten the set screws that are locate
8. d on the universal bracket 3i Place the display on a soft flat surface face down Next place the universal bracket assembly on the back of the display with the universal brackets resting directly over the display mounting points 4 Once the desired position has been determined place the Griplate washers over each mounting point and secure them using the appropriate hardware see Page 5 Note For the two upper mounting points the Griplate flat side must be facing up For the two lower mounting points the Griplate flat side must be facing down 5 At this time center the universal bracket bar and tighten the set screws that are located on the universal brackets Universal Mounting Brackets Set Screw Griplate Universal Bracket Bar Griplate A WARNING IT WILL TAKE TWO PEOPLE TO COMPLETE THE NEXT INSTALLATION STEP Page 8 Installation Instructions 4 6 Lower the universal bracket bar with attached display into the cradle as shown to the left Nylon Sleeve After loosening the tension bolts be sure that the Not nose piece is held together tightly before rotating Knurl Knob Mounting Point M6 x 12mm Security Head and M6 Lock Washer Mounting Point 7 Insert an M6 Knurl Knob M6 x 12mm Security Head and M6 Lock Washer into the knurl knob security screw mounting point and tighten To access the knurl knob security screw A Note location while the display is attached the
9. l not be accepted over the phone or by fax Premier Mounts Attn Warranty Claim 3130 E Miraloma Avenue Anaheim CA 92806 How State Law Applies THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE Installation Instructions Page 11
10. oses to replace a defective product or part a replacement product or part will be shipped to you at no charge but you must pay any labor costs What is Not Covered Limitations PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS ADAPTERS DISPLAYS PROJECTORS OTHER PROPERTY OR PERSONAL INJURY RESULTING IN WHOLE OR IN PART FROM IMPROPER INSTALLATION MODIFICATION USE OR MISUSE OF ITS PRODUCTS PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED IN CLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR POSE PREMIER MOUNTS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO INABILITY TO USE ITS PRODUCTS OR LA BOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS OR PARTS SOME STATES DO ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE QUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU What Customers Must Do for Limited Warranty Service If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within thirty 30 days Proof of purchase an original sales receipt from the original con sumer purchaser must accompany all warranty claims Warranty claims must also include a description of the problem the purchaser s name address and telephone number General inquiries can be addressed to Premier Mounts Customer Service at 1 800 368 9700 Warranty claims wil
Download Pdf Manuals
Related Search