Edimax EW-7113UHG
Contents
1. 1 Introduction Thank you for purchasing the 802 11g Hi Gain Wireless LAN USB Adapter This adapter complies with IEEE 802 119 standard which supports up to 54Mbps high speed wireless network connections It can also work with IEEE 802 11b devices When the card connects to 11b devices the link speed will be up to 11Mbps By integrating with 6dBi Directional Hi Gain Antenna this USB Adapter increases the signal strength and the focus of wireless coverage so that the link quality and communication distance are significantly improved For security issues this adapter supports 64 128 bit WEP data encryption that protects your wireless network from eavesdropping It also provides WPA Wi Fi Protected Access feature that combines IEEE 802 1x and TKIP Temporal Key Integrity Protocol technologies With WPA function users are required to authorize before accessing to APs or AP Routers and the data transmitted in the network is encrypted decrypted by a secret key dynamically changed This adapter supports USB 2 0 interface which is forty times than USB 1 1 interface Through the faster data transfer interface this adapter can deliver more data at a time and raise the data transfer rate to 54Mbps USB 2 0 is also backward compatible with USB 1 1 1 0 standards so the adapter can work with PCs or Laptops that only support USB 1 1 1 0 interface This card is cost effective together with the versatile features it is the best solution for you to build y2. Access WPA is a specification of standards based interoperable security enhancements that strongly increase the level of data protection encryption and access control authentication for existing and future wireless LAN systems The technical components of WPA include Temporal Key Integrity Protocol TKIP for dynamic key exchange and 802 1x for authentication WPA function is enabled in the following software system 1 Windows XP Service Pack 1 with Windows XP Support Patch for Wi Fi Protected Access program in addition 2 Configure the card by Wireless built in utility Wireless Zero Configuration Wireless Network Connection The following wireless network s are available To access a wireless network select it from the list and then click Connect Available wireless networks E i OBM DEPT default This wireless network is not secure Because a network A key WEP 12 not uted for authentication or for data encryption data sent over this network might be subject to 1 From here right click the icon to unauthorized access select View Available Wireless 2 Allow me to connect to the selected wireless network Networks even though itis not secure 2 Click Advanced from Wireless Network Connection If you are having difficulty connecting to a network click Advanced M Terere D PS 14 Wireless Network Connection Properties If Wireless network properties General Wireless
3. Hoc mode and channel one If you want to set up to default click this button Profile Configuration General Security Security WEP Use 802 1 Encryption Keps Hex 0 9 4 F C Key C Keyes C Keys 40 64 bits C Kepd A 140 64 bits global key is uted to send broadcast and multicast packets to all clients that are communicating with an access point 4 global key can also be used to send unicast packets to and from the client There must be a minimum of four global keys supported by cancel tse Encryption Parameter Description Security None Disable the WEP Data Encryption WEP Enable the WEP Data Encryption When the item is selected you have to continue setting the WEP Key Length and the encryption keys Use 802 1x This function is not activated yet It will not implement if you enable it 13 Parameter Description Encryption Key Select the default encryption key from Key 1 to Key 4 by selected Key1 Key4 the radio button The WEP keys are used to encrypt data transmitted in the wireless network Fill the text box by following the rules below 64 bit Input 10 digit Hex values in the A F a f and 0 9 range as the encryption keys For example 0123456aef 128 bit Input 26 digit Hex values in the A F a f and 0 9 range as the encryption keys For example 012345678901 23456789abcdef 3 2 2 Enable WPA Wi Fi Protected
4. Networks Advanced Association Authentication Avallable networks Wireless network key To connect to an available network click Configure ETD i OBM DEPT gt Network Authentication A default Data encryption Prefered networks This network requires a key for the following Automatically connect to available networks in the order listed below Add Leam about setting up wireless network C This ig a computer to computer ad hoc network wireless configuration access points are not used 3 Click Configure to configure the WPA function for the current network Parameter Description Network Authentication Open No authentication is needed among the wireless network Shared Only wireless stations using a shared key WEP Key identified are allowed to connecting each other WPA This mode is for enterprise with an authentication server Radius Server WPA enabled access point and a WPA enabled client Once WPA is enabled all clients and access points on the network must be WPA enabled in order to access the network WPA PSK It is a special mode designed for home and small business users who do not have access to network authentication servers In this mode known as Pre Shared Key the user manually enters the starting password in their access point or gateway as well as in each PC on the wireless network WPA takes over automatically from that point keeping unauthorized users tha
5. USB 2 0 Extension Cable 150 cm One Quick Guide One CD Driver Utility User Manual If any of the above items is missing contact your supplier as soon as possible 2 Installation Procedure Before you proceed with the installation please notice following descriptions Note The following installation was operated under Windows XP Procedures are similar for Windows 98SE Me 2000 Note The driver of Windows 2000 can only support Windows 2000 Service Pack 3 above I Install the Driver A Insert the Installation CD into your CD ROM driver B Insert the USB adapter to the USB port of your laptop or desktop PC Found New Hardware Wizard Found New Hardware Wizard Welcome to the Found New Please choose your search and installation options SS Hardware Wizard Y This wizard helps you install software for Search for the best driver in these locations WIND502 USB 2 0 Wirelss Network Controller Use the check boxes below to limit or expand the default search which includes local paths and removable media The best driver found will be installed in Search removable media floppy CD ROM If your hardware came with an installation CD i as SS or floppy disk insert it now Include this location in the search D ADriveri2K_XP What do you want the wizard to do E Don t search will choose the driver to install Choose this option to select the device driver from a list Windows does not guarantee
6. is Wired Equivalent Privacy a data privacy mechanism based on a 40 bit shared key algorithm as described in the IEEE 802 11 standard 9 What is TKIP TKIP is a quick fix method to quickly overcome the inherent weaknesses in WEP security especially the reuse of encryption keys TKIP is involved in the IEEE 802 111 WLAN security standard and the specification might be officially released by early 2003 10 What is AES AES Advanced Encryption Standard a chip based security has been developed to ensure the highest degree of security and authenticity for digital information wherever and however communicated or stored while making more efficient use of hardware and or software than previous encryption standards It is also included in IEEE 802 11i standard Compare with AES TKIP is a temporary protocol for replacing WEP security until manufacturers implement AES at the hardware level 11 Can Wireless products support printer sharing Wireless products perform the same function as LAN products Therefore Wireless products can work with Netware Windows 2000 or other LAN operating systems to support printer or file sharing 12 Would the information be intercepted while transmitting on air WLAN features two fold protection in security On the hardware side as with Direct Sequence Spread Spectrum technology it has the inherent security feature of scrambling On the software side WLAN series offer the encryption function WEP to enha
7. provided that the receiver knows the parameters of the spread spectrum signal being broadcast If a receiver is not tuned to the right frequency a spread spectrum signal looks like background noise There are two main alternatives Direct Sequence Spread Spectrum DSSS and Frequency Hopping Spread Spectrum FHSS 20
8. the screen there are two pages including General and Security Profile Configuration General Security Mame Network Mame SSID Network Mode Infrastructure Ad Hoc Power Save te Channel Frequency Phy Mode Channel f 802 11 beg 1 2412 GHz Auto Select Profile member Defaults cancel avo General Parameter Description Name To name a recognizable profile name for you to identify the different Network Name SSID Network Mode Power Save networks The SSID up to 32 printable ASCII characters is the unique name identified in a WLAN The ID prevents the unintentional merging of two co located WLANs You may specify a SSID for the adapter and then only the device with the same SSID can interconnect to the adapter Infrastructure This operation mode requires the presence of an 802 11 Access Point All communication is done via the Access Point Ad Hoc Select this mode if you want to connect to another wireless stations in the Wireless LAN network without through an Access Point Enable the adapter in the power saving when it is idle 12 Parameter Description Channel Frequency This setting is only available for Ad Hoc mode The channel setting should be the same with the network you are connecting to Auto Select Profile Member If you select the check box this profile will be put in the Auto Selection Profiles list Defaults The default values are Ad
9. 8 13 EEC Telecommunications Terminal Equipment and Satellite Earth Station Equipment As of April 8 2000 Safety This equipment is designed with the utmost care for the safety of those who install and use it However special attention must be paid to the dangers of electric shock and Static electricity when working with electrical equipment All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria Belgium Denmark Finland France Germany Greece Ireland Italy Luxembourg the Netherlands Portugal Spain Sweden and the United Kingdom The ETSI version of this device is also authorized for use in EFTA member states Iceland Liechtenstein Norway and Switzerland EU Countries Not intended for use None CONTENTS Ll INTRODUCTION rro os 1 Pe Ie A tener mrronreret Tertgtcd ernie tert t tertgtcy Terni enema wnat Tere y Ter err neer en MrT r res l HZ Pecos ad dois diia l tS PACK ASS COC AS aie ata aoe A E S 2 2 INSTALLATION PROCEDURE sessescesoesoccoesoecoecoecoecoeccecceccecoecoeeo 3 3 CONFIGURATION UTILILEY siones 7 FA TE eee Re 7 Ded UP PETC REN CS INS AAA 0 A aide eae ecnsts tal notte Sete 9 MRS SUL VEY das 9 22 A An 10 2 COMMOUNS te roller a a 102 A en 14 e O cs A A eialeatcnt 16 RR ER ne 17 4 TROUBLESHOOTING src rai 18
10. 802 11g Hi Gain Wireless LAN USB Adapter User Manual Version 1 0 March 2004 COPYRIGHT Copyright 2004 2005 by this company All rights reserved No part of this publication may be reproduced transmitted transcribed stored in a retrieval system or translated into any language or computer language in any form or by any means electronic mechanical magnetic optical chemical manual or otherwise without the prior written permission of this company This company makes no representations or warranties either expressed or implied with respect to the contents hereof and specifically disclaims any warranties merchantability or fitness for any particular purpose Any software described in this manual is sold or licensed as is Should the programs prove defective following their purchase the buyer and not this company its distributor or its dealer assumes the entire cost of all necessary servicing repair and any incidental or consequential damages resulting from any defect in the software Further this company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes All brand and product names mentioned in this manual are trademarks and or registered trademarks of their respective holders Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the
11. 802 11g and 11Mbps for 11b Display the security setting of the network Disabled mean no security settings of the network This field displays the power save scheme for the adapter that is Max performance Max battery life Auto This field shows the current connection profile This field shows the transmitter s status On or Off This button is used to enable and disable radio transmission The number of link quality indicates the quality of the link The higher the percentage the better the quality This field shows the current received baud rate measured in Kbytes sec This field shows the current sent baud rate measured in Kbytes sec The data rate is changed when the environment is different This field can display the current data rate so that you can adjust the direction of the adapter or distance from other wireless stations If you want to change the unit of link quality or the update interval for transmitted and received data click this button to change the settings Parameter Description View Site Button To view the available network nearby click the View Site button 3 1 1 Preference Setting This preference screen enables you to change the unit of link quality or the update interval for transmitted and received data The default settings is 10 for Statistics Update Interval and Percent for Parameter Display Units If you want to set up as default values click Defa
12. Click Function List Description If a profile is set as an Auto Selection profile it is used to attempt to automatically connect the adapter to the respective profile in the order of the appearance at startup The networks ever been connected by the adapter will display in the profile list If you want to connect to one of the profiles in the list double click the item on the list or right click the network and select Connect You can create additional profiles here as other selections The adapter will not connect to the additional profiles in the list automatically If you want to change the connection to one of the profiles double click the profile or select the profile and click Connect You can click New and Edit to configure the profile list Add Add a new profile in the list Edit Edit the selected profile Duplicate Copy the same profile to the list Delete Delete the selected profile Connect Connect to the profile Add Remove to from Auto Selection Add the profile to the Auto Selection Profiles or remove it from Auto Selection Profiles to Additional Profiles Export Profile Save the profile as a new file Import Profiles Import the profile file to the list Export All Profiles Save all the profiles as a new file 11 3 2 1 Configure the Profile When you click New or Edit the Profile Configuration screen will be popped up In
13. ENV RA WIND 802 119 Regulatory Domain FCC 115 Driver Version 134211 Firmware Version OO02 0165 0049 COCO NM Version 040070 26 MAC Address 00 50 02 23 80 00 Configuration Utility Version 1 5 0 7 15 5ep 2003 Copyright Envara Ine 2003 WIA Enya COM Preferences View Site 17 4 Troubleshooting This chapter provides solutions to problems usually encountered during the installation and operation of the adapter 1 Why can t the USB adapter work or only work in 11b mode while connect to USB 2 0 port If this situation occurs please upgrade the driver of your USB port This problem may be the compatibility issue with the old driver of the USB port 2 What is the IEEE 802 119 standard 802 11g is the new IEEE standard for high speed wireless LAN communications that provides for up to 54 Mbps data rate in the 2 4 GHz band 802 11g is quickly becoming the next mainstream wireless LAN technology for the home office and public networks 802 11g defines the use of the same OFDM modulation technique specified in IEEE 802 11a for the 5 GHz frequency band and applies it in the same 2 4 GHz frequency band as IEEE 802 11b The 802 11g standard requires backward compatibility with 802 11b The standard specifically calls for A A new physical layer for the 802 11 Medium Access Control MAC in the 2 4 GHz frequency band known as the extended rate PHY ERP The ERP adds OFDM as a mandatory new coding scheme fo
14. Utility Go to Start All Programs Envara Configuration Utility and select Envara Configuration Utility You are able to use the utility Envara Configuration Utility Profiles CurentStatistics About Connection Connected to SSID default Network Mode Infrastructure Channel Frequency 10 7 2 457 GHz 802 116 Mas Network Aate 11 Mbps Security Disabled Max Performance Profile 0 Power Save Active Profile Radio Transmitter Link Status Radio Status Hi Link Quality Enable Radio Received Re Sent A Network Rate Preferences View Site 3 Configuration Utility The Configuration Utility is a powerful application that helps you configure the adapter and monitor the link status and the statistics during the communication process However there are some restrictions on the utility Before using the utility you have to know about them 1 Ifyou want to connect to 11g up to 54Mbps network please ensure to install the adapter to PC or laptop with USB 2 0 interface This adapter can only support 11b while you connect it to the USB 1 1 1 0 port of your computer 2 Windows 98SE Me may not support USB 2 0 interface so that this adapter can only work in 11b mode in that kind of OS system 3 This adapter will work in 11b mode when the network type is in Ad Hoc mode It is defines by Wi Fi organization If you want to enable the data rate up to 54Mbps 11g please follow step
15. ick Finish to close the wizard Cancel ac Cancel F The wizard will install the driver automatically Click Finish to complete the installation ll Install the Utility A Execute the Utilityisetup exe program from the installation CD InstallShield Wizard ie Envara Configuration Utility InstallShield Wizard Welcome to the InstallShield Wizard for en Preparing to Install P Envara Configuration Utility y Envara Configuration Utility Setup is preparing the InstallShield Wizard which will guide you through the program setup process Please wait The InstallShield R Wizard will install Envara Configuration Utility on your computer To continue click Next Checking Operating System Version WARNING This program is protected by copyright law and international treaties ie Envara Configuration Utility InstallShield Wizard License Agreement w Customer Information Please read the following license agreement carefully Please enter your information User Name END USER LICENSE AGREEMENT FOR ENYARA CONFIGURATION Guest UTILITY Organization IMPORTANT READ CAREFULLY This End User License Agreement Guest ss EULA is a legal agreement between you either an individual person or a single legal entity who will be referred to in this EULA as You and the Licensor for the ENVARA software technology that displays this EULA including any associated media printed materials and electr
16. limits for a Class B digital device pursuant to Part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio technician for help FCC Caution This device and its antenna must not be co located or operating in conjunction with any other antenna or transmitter This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Any changes or modifications not expressly appro
17. nce security and Access Control Users can set it up depending upon their needs 19 13 What is DSSS What is FHSS And what are their differences Frequency hopping spread spectrum FHSS uses a narrowband carrier that changes frequency in a pattern that is known to both transmitter and receiver Properly synchronized the net effect is to maintain a single logical channel To an unintended receiver FHSS appears to be short duration impulse noise Direct sequence spread spectrum DSSS generates a redundant bit pattern for each bit to be transmitted This bit pattern is called a chip or chipping code The longer the chip is the greater the probability that the original data can be recovered Even if one or more bits in the chip are damaged during transmission statistical techniques embedded in the radio can recover the original data without the need for retransmission To an unintended receiver DSSS appears as low power wideband noise and is rejected ignored by most narrowband receivers 14 What is Spread Spectrum Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in reliable secure mission critical communication systems It is designed to trade off bandwidth efficiency for reliability integrity and security In other words more bandwidth is consumed than in the case of narrowband transmission but the trade off produces a signal that is In effect louder and thus easier to detect
18. omatically You can also right click the network and select Connect Save the selected network to be a profile This profile will be listed in the profiles list table so that you can easy to connect to the network without from Site Survey screen You can also right click the network and select Save as Profile If the connection network has changed the WEP security setting you can click this button to update the setting of the adapter Note that the WEP setting has to be the same with the network You can also right click the connection network and select Edit Connect Click Rescan button to collect the associated information of all the wireless networks nearby This switch button can change the way to display the available networks Network View displays the network information simply You can manage the connection list from profiles list It is very convenience for you to connect to one of the networks quickly 10 Envara Configuration Utility General Profiles CurrentStatistics About Auto Selection Profiles Be Profile 0 default Additional Profiles Edit Duplicate Delete Connect Remove From Auto Selection Profile Name Network Mame SSID Security Export Profile Profile 1 SQ None Import Profiles Export All Profiles Connect New Edit 3 Connected Preferences Mer Site Close Parameter Auto Selection Profiles Additional Profiles Right
19. onic documentation the Software The Install this application For Software also includes any software updates add on components only For me OI do not accept the terms in the license agreement InstallShield InstallShield C Choose the selection I accept the terms in the D Enter your User Name and Organization license agreement and click Next which is only for reference then click Next ie Envara Configuration Utility InstallShield Wizard ie Envara Configuration Utility InstallShield Wizard Destination Folder Installing Envara Configuration Utility Click Next to install to this folder or click Change to install to a different folder Y The program features you selected are being installed A Install Envara Configuration Utility to AU Please wait while the InstallShield Wizard installs Envara Configuration G Program Files EnvaralEnvaraConfig rm oy Utility This may take several minutes Status InstallShield InstallShield E If you want to change the destination folder click Change or click Next to continue ie Envara Configuration Utility InstallShield Wizard InstallShield Wizard Completed The InstallShield Wizard has successfully installed Envara Configuration Utility Click Finish to exit the wizard Cancel F The wizard has installed the driver automatically Click Finish to complete the installation lll Using the
20. our wireless network 1 1 Features e Comply with IEEE 802 119 2 4GHz OFDM and IEEE 802 11b standards e Works with both IEEE 802 11b and IEEE 802 119 products High speed transfer data rate up to 54Mbps e High throughput supports multi media data bandwidth requirement e Supports 64 128 bit WEP and WPA TKIP with IEEE 802 1x with WLAN securities e Automatic data rate fallback increases data security and reliability e Supports the most popular operating system Windows 98SE Me 2000 XP e Supports USB 2 0 1 1 1 0 interface 1 2 Specifications e Standard IEEE 802 11b g e Host Interface USB 2 0 1 1 1 0 e USB Port Mini USB e Frequency Band 2 4000 2 4835GHz Industrial Scientific Medical Band e Modulation OFDM with BPSK QPSK 16QAM 64QAM 11g BPSK QPSK CCK 11b Data Rate 54 48 36 24 1 8 1 2 1 1 9 6 5 5 2 1 Mbps auto fallback Security 64 128 bit WEP Data Encryption WPA TKIP with IEEE 802 1x Antenna 6dBi Directional Hi Gain Antenna Drivers Windows 98SE Me 2000 XP 2000 Service Pack 3 above LEDs Power Link Transmit Power 20dBm Signal Range Indoors Up to 500 ft 150 meters Outdoors Up to 2100 ft 650 meters Dimension 120 H x 75 W x 87 D mm Temperature 32 131 F 0 55 C Humidity Max 95 NonCondensing Certification FCC CE 1 3 Package Contents Before you begin the installation please check the items of your package The package should include the following items One USB Adapter One
21. r 6 12 and 24 Mbps mandatory speeds and 18 36 48 and 54 Mbps optional speeds The ERP includes the modulation schemes found in 802 11b including CCK for 11 and 5 5 Mbps and Barker code modulation for 2 and 1 Mbps B Aprotection mechanism called RTS CTS that governs how 802 11g devices and 802 11b devices interoperate 3 What is the IEEE 802 11b standard The IEEE 802 11b Wireless LAN standard subcommittee which formulates the standard for the industry The objective is to enable wireless LAN hardware from different manufactures to communicate 4 What does IEEE 802 11 feature support The product supports the following IEEE 802 11 functions CSMA CA plus Acknowledge Protocol Multi Channel Roaming Automatic Rate Selection RTS CTS Feature Fragmentation Power Management 5 Whatis Ad hoc An Ad hoc integrated wireless LAN is a group of computers each has a Wireless LAN adapter Connected as an independent wireless LAN Ad hoc wireless LAN is applicable at a departmental scale for a branch or SOHO operation 18 6 What is Infrastructure An integrated wireless and wireless and wired LAN is called an Infrastructure configuration Infrastructure is applicable to enterprise scale for wireless access to central database or wireless application for mobile workers 7 Whatis BSS ID A specific Ad hoc LAN is called a Basic Service Set BSS Computers in a BSS must be configured with the same BSS ID 8 Whatis WEP WEP
22. s listed below A moO W 3 1 Go to Network Connections Right Click the Wireless Network Connection and select Properties From the pop up screen click Configure Enter into Advanced page of the Properties screen Change the setting of IBSS Originator Phy Mode from 802 11b to 802 119 General From the General screen you can view all the information of the network you are connecting to Envara Configuration Utility Saks Connection Connected to 55101 default Network Mode Infrastructure Channel Frequency 10 7 2 457 GHz 802 116 Mas Network Aate 11 Mbps Security Disabled Power Saver Max Performance Active Profile Profile O Radio Transmitter Link Status Radio Status Hwy Laa Recelved NE Sent Ei Network Rate Preferences View Site Parameter Connected to SSID Network Mode Channel Frequency Max Network Rate Security Power Save Active Profile Radio Status Enable Radio Button Link Quality Received Sent Network Rate Preferences Button Description Display the wireless network which the adapter is connecting to There are two sorts of network types Infrastructure and Ad Hoc This field shows the current network type Display the number of the radio channel and the frequency used for the networking This field shows the maximum link rate of the network that Is 54Mbps for
23. t don t have the matching password from joining the network while encrypting the data traveling between authorized devices 15 Parameter Description Data Encryption WEP In WPA or WPA PSK mode WEP is also able to be the encryption method for the transmission data TKIP TKIP Temporal Key Integrity Protocol changes the temporal key every 10 000 packets a packet is a kind of message transmitted over a network This insures much greater security than the standard WEP security Note All devices in the network should use the same encryption method to ensure the communication 3 3 Current Statistics This option enables you to view the sign strength and the statistic information of successful Tx and Rx baud rate You may reset the counters by clicking Reset The SNR indicates the rate of noise and signal in the environment the bigger of the value the better of the signal strength Envara Configuration Utility General Profiles Currenttatistics About Receiwed Signal Activity Signal Strength ggz Receiwing 0 KB sec SHA 23 dB Sending ORB sec Network Rate 11 Mbps Reset Preferences View Site 16 3 4 About By choosing this option you can view basic information such as the Driver Firmware and Utility Version And you can click the hyperlink to connect the website for the information of the wireless chipset vendor Envara Configuration Utility See Device Device Name
24. that the driver you choose will be the best match for pour hardware RT ATI C Choose the selection Install from a list or D Click Browse to search for the driver Choose specific location Advanced and click Next the location to D Driver xxx D is where your CD ROM Driver xxx is the OS system of your computer and click Next Found New Hardware Wizard Hardware Installation Please wait while the wizard searches A The software you are installing for this hardware WIND502 USB 2 0 Wireless Network Adapter has not passed Windows Logo testing to verify its compatibility with Windows lt P Tell me why this testing is important 2 WIND502 USB 2 0 Wirelss Network Controller Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing a gt STOP Installation E A Windows driver warning message appears click Continue Anyway Cancel Found New Hardware Wizard Found New Hardware Wizard Please wait while the wizard installs the software Completing the Found New Hardware Wizard The wizard has finished installing the software for Haj WIND502 USB 2 0 Wireless Network Adapter Hg WIND502 USB 2 0 Wireless Network Adapter Cl
25. ults This preference setting also enables you to change the Country Code When you are in different country you can change the country code from here Preferences Creneral statistics Update Interval 10 SECS Parameter display units C dBm Percent del po 0211W County Code County Code selection FCC MEA Defaults Cancel Apply 3 1 2 Site Survey This screen shows all wireless networks nearby If you want to connect to any network on the list double click the item on the list or click Connect and the adapter will automatically connect to the selected network Available AP s Link Quality Network Name SSID Security Channel Rate MAC como Infrastr None 11 11 Mbps 00 11 68 one 4 11 Mbps 00 50 a Save Protile Rescan 50 Infrastr EEE a F default gt Infrastr None Ms Emir gt Excellent Good Medium Y Poor E Connected Network view Close Parameter Available Networks AP s List Connect Button Save Profile Button Edit Connect Button Rescan Button AP View Network View Button 3 2 Profiles Description In the list you can know the information of wireless networks including Link Quality Network Name Mode Security etc This information will help you to decide which network you want to connect Select one of the networks from the list and click Connect the adapter will connect to the network aut
26. ved by the party responsible for compliance could void the authority to operate equipment Federal Communications Commission FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment In order to avoid the possibility of exceeding the FCC radio frequency exposure limits human proximity to the antenna shall not be less than 2 5cm 1 inch during normal operation Federal Communications Commission FCC RF Exposure Requirements SAR compliance has been established in the laptop computer s configurations with PCMCIA slot on the side near the center as tested in the application for Certification and can be used in laptop computer s with substantially similar physical dimensions construction and electrical and RF characteristics Use in other devices such a PDAs or lappads is not authorized This transmitter is restricted for use with the specific antenna s tested in the application for Certification The antenna s used for this transmitter must not be co located or operating in conjunction with any other antenna or transmitter R amp TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999 5 EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity R amp T TE The R amp TTE Directive repeals and replaces in the directive 9
Download Pdf Manuals
Related Search