Digitus Desktop PS/2 OSD, 8-Port
Contents
1. from the group of A Z O 9 5 7 S f Sero Sr Selection BAR It shows the selection bar Green you can use the t keys on the board to move the selection bar and the situated position indicates the selected target for giving instructions For example if the selection bar points at CH05 and you press Enter then the system will switch to that particular PC or press the Space BAR to start editing the name 4 Instruction Hint Field T Use thet keys to move the selection bar SPACE The Space BAR is used to start editing the name of the PC ESC Use the Esc key to exit the current option or exit OSD F4 Use the F4 key to run Auto Scan and you can set the residing time channel display time and mode of the Auto Scan from System Setting F9 Use the F9 key to enter into the System Setting Menu F5 Use the F5 key to clear the values of all Name fields System Setting Menu CHANNEL DISPLAY TIME AUTO SCAN TIME HOT KEY SWITCHING MOUSE CLICKING BEEPER SOUND AUTO SKIP item Description Default _ Other Selection For Port Switching Auto Channel Scan and OSD Close Number Display Mode the Monitor will show the Full Name Channel information and mode selection It shows the time for displaying channel information Auto Scan lipe reeda time foreach seep 10909 20Sec Time port g 30Sec 60Sec 10Sec Always None Channel Display Time Turn on off the Ctrl hot ke2. Specifications Rear View PC Connectors Oo 8 O Port Selection Hot Key OSD Online 8an S S LEDS Selected 83 Z o KVM SWITCH oo oko oie o 1 Console Monitor Connector 2 CPU Port Comectors Connector Keyboard CPU Port 8x6 pin mini DIN Installation Female PS 2 Before the installation make sure the peripherals of all PCs are grounded properly and Console Port 1x6 pin mini DIN Female PS 2 uredor Connector ere Mouse CPU Port 8x6 pin mini DIN 1 Connect the monitor keyboard and mouse with the Console Port Connectors DS 13112 Female PS 2 2 Use the recommended cable sets to connect the PCs with the CPU Ports of Connector Console Port 1x HD 15 Female Std VGA SVGA KVM Switch Monitor CPU Port 8x HD 15 Male 3 Tunonthe PCs Std VGA SVGA VER Resse 1920x1440 Max DDC DDC2 DDC2B DDC2AB 200MHz Operation 1 The function of LED display LED DISPLAY Housing 1 user manual Green light on amp Red light e 1 DC 9V 600mA power adapter flashing e 2 rack rails 8 screws Note Any thing missed please contact with your vendor Hardwa re Req u i rements E E ce dada aia a eae Requirement specifications Eo The condition will not affect the regular operation of KVM switch One highest resolution VGA SVGA or Multisync monitor Console One PS 2 mouse One PS 2 keyboard PC USER MANUAL V1 0 DS 13112 DESCRIPTION Package Contents e 1 DS 13112 KVM Switch ight off PC
3. ames used in these instructions are trademarks or registered marks of the corresponding companies 6
4. kips over the power off PC Beep sound and multi selection ways on off option for port selection 1U rack design Appearance Front View KVM Switch oo 1 Port Selection Switches Manual type 2 Port LEDs 3 Console Keyboard and Mouse Connector S 2 2 Mouse clicking Operation Function Middle button Left Button Switch to the previous PC Middle button Right Button Switch to the next PC Note 2 Key Mouse is NOT applicable 2 3 Hot Key option Hot Key Navigation allows you to select PC fromthe keyboard directly Options for Hot Key Navigation Select PC by Hot Key OSD node Select PC by Hot Key Press either left or right Ct key twice Hot Key Operation Function L Ctrl L Ctrl Switch to the previous PC R Ctrl R Ctrl Switch to the next PC OSD Mode Press the Num Lock key twice to access the OSD mode Switch Menu ooo amp J This field provides the information of the currently connected PC This field shows the list of the KVM 6 PORT or KVM 8 PORT This field shows the list of connections to the PC and the fields are described below 1 2 3 PWR It shows the status of power supply and indicates a normal power supply for the PC connected to the CPU port CH It shows the channel number the DS 13112 will display 01 08 NAME It shows the name of the equipment and users can name the PC on their own There are a total of 12 characters selected
5. lug the cables back and activate the PCs A1c When under Auto Scan Mode please press Esc key to escape A1d Try another keyboard Q2 The mouse does not respond accurately A2a Re install the mouse Unplug the mouse from the Console Port and plug it back again A2b Re install the KVM Switch Shut down the PCs unplug the cables from the KVM Switch and wait for five seconds Then plug the cables back and activate the PCs A2c Make sure the mouse is set on PS 2 mode A2d Try another mouse 5 Note If you are using a particular mouse we suggest installing the mouse driver from original manufacturer to reveal the functionality of KVM Switch Q3 The mouse is out of control A3 The characteristic of the mouse is inefficient Try another superior mouse and plug it back again Start the operation after hearing the beep sound Q4 There is the video problem A4a The setting of resolution or bandwidth is over high KVM Switch supports the VGA SVGA Multisync and XGA interlaced with the resolution up to 1920 x 1440 Hz The maximum bandwidth is 200 MHZ A4b The cable is unqualified Please use the superior cables of KVM Switch cables series Q5 Why the green light of LED display is on and red light keeps flashing after shutting down the PC Ad The condition is normal and caused from the PC default The condition will not affect the regular operation of KVM switch Trademarks All company brand and product n
6. power off PC power on and connected PC power on connected and selected Features Controls PCs with one PS 2 keyboard PS 2 mouse and monitor respectively e Supports the standard PS 2 mouse Microsoft IntelliMouse PS 2 compatible Optical Explorer 3 0 WheelMouse Optical Trackball Optical 1 0 Explorer 1 0 amp Logitech TrackMan Marble Marble FX Marble Cordless MouseMan Wheel Optical Cordless 2 4 vays for PC selection Push button switch or mouse clicking or hot key or OSD 2 1 Push button switch Manual Type Press the button on front pane to switch the CPU ports The red light of LED indicates which PC is selected One VGA SVGA or Multisync card One 6 pin mini DIN PS 2 mouse port One 6 pin mini DIN PS 2 keyboard port KVM cable set or equivalent TrackMan FX Live mouse Cordless Optical TrackMan MX300 Optical mouse Fully supports the Microsoft IntelliPoint 5 0 mouse driver amp Logitech Mouse Ware driver Supports the Windows 95 98 98SE Me NT4 0 2000 XP Vista DOS Linux Novell Netware FreeBSD Superior video quality Up to 1920 x 1440 Pixel DDC DDC2 DDC2B DDC2AB 200MHz Supports selecting PC by mouse clicking Real mouse identification function 4 ways PC selection Push Button Switch or mouse clicking or Hot Key or OSD Easy to install No software required Hot Pluggable Integral keyboard and mouse emulation for PC booting error free Auto scan function to monitor PCs Auto s
7. ys on the keyboard for ON OFF switching computer functions ae Mouse Clicking the mouse for switching computer functions Beeper Sound Turn on off the beeper sound function to on or off F1 It provides the model name and F W version information F4 You can use the Up Down Left or Right keys to move the OSD position F8 Restore the factory default settings Please note that all name lists will be cleared and the system settings are set to the default settings as shown in the table above Esc Exit the system setting and close the OSD If you have made changes in this option the system will ask whether or not you want to save the setting before the selected option is effective Auto Scan Mode You can start the OSD first and press F4 to enter the Auto Scan Mode If you want to scan the PC you can select the Auto Scan Time in the System Setting for the residing time You can adjust the Channel Display Mode and Channel Display Time from the Channel Display mode By then all keys on the panel keyboard and mouse are not operable You can only use the ESC key to exit the Auto Scan Mode Troubleshooting Making sure the cables are qualified and positioned Q1 The keyboard does not respond accurately Ala Re install the keyboard Unplug the keyboard from the Console Port and plug it back again A1b Re install the KVM Switch Shut down the PCs unplug the cables from the KVM Switch and wait for five seconds Then p
Download Pdf Manuals
Related Search