ProCurve Switch 2610 Series
Contents
1. 149 F 65 C non condensing Storage relative humidity Alitude up to 10000 ft 3 km Acoustic Power 46 dB Pressure 38 4 dB DIN 45635T 19 per ISO 7779 Electrical characteristics Maximum heat dissipation 181 BTU hr 190 96 kJ hr Switch only BTU hr 181 combined switch maxPoE devices at 15 4 W 827 BTU hr Voltage 100 127 200 240 VAC Current S07 17 A Power consumption 62 W Frequency 50 60 Hz NOTE Power Consumption 62 W without PoE 189 W with PoE Safety CSA 22 2 No 60950 UL 60950 IEC 60950 EN 60950 Emissions FCC Class A VCCI Class A EN 55022 CISPR 22 Class A Immunity EN EN 55024 CISPR 24 ESD IEC 61000 4 2 4 kV CD 8 kV AD DA 13032 Worldwide Version 1 March 10 2008 Page 11 invent QuickSpecs ProCurve Switch 2610 Series Technical Specifications Management Standards and protocols DA 13032 invent Radiated IEC 61000 4 3 3V m EFT Burst IEC 61000 4 4 1 0 kV power line 0 5kV signal line Surge IEC 61000 4 5 1 kV 2 kV AC Conducted IEC 61000 4 6 3V Power frequency IEC 61000 4 8 1A m 50 or 60 Hz magnetic field Voltage dips and IEC 61000 4 11 gt 95 reduction 0 5 period interruptions 30 reduction 25 periods Harmonics EN 61000 3 2 IEC 61000 3 2 Flicker EN 61000 3 3 IEC 61000 3 3 ProCurve Manager Plus ProCurve Manager included command line intertace Web browser contiguration menu out of band management serial RS 232C Device Mana2. PCM 2 3 100 device license gives the customer an additional 100 device license for companies with growing managed device counts invent System requirements Minimum system hardware Recommended system ardware Recommended software For networks having 50 to 250 managed devices ProCurve recommends the following 2 0 GHz Intel Pentium 4 or equivalent processor 2 GB RAM memory 10 GB storage 1000 MB NIC for PCM as a standalone application assuming a dedicated server 3 0 GHz Intel Pentium 4 or equivalent processor 3 GB RAM memory 40 GB storage 1000 MB NIC tor PCM assuming a dedicated server and including ProCurve Identity Driven Manager Mobility Manager and Network Immunity Manager on the same server Microsoft Windows 2003 Server Windows XP SP2 Windows XP Professional SP2 For networks having 250 to 2 000 managed devices ProCurve recommends the following Minimum system hardware Recommended system hardware Recommended software Browsers Supported platforms Additional requirements 3 0 GHz Intel Pentium 4 or equivalent processor 3 GB RAM memory 40 GB storage 1000 MB NIC tor PCM as a standalone application assuming a dedicated server Intel Xeon or equivalent processor 4 GB RAM memory 80 GB storage 1000 MB NIC tor PCM assuming a dedicated server and including ProCurve Identity Driven Manager Mobility Manager and Network Immunity Manager on the same server Microsoft Wi
3. A VCCI Class A EN 55022 CISPR 22 Class A Immunity EN EN 55024 CISPR 24 ESD IEC 61000 4 2 4 kV CD 8 kV AD Radiated IEC 61000 4 3 3V m EFT Burst IEC 61000 4 4 1 0 kV power line 0 5kV signal line Surge IEC 61000 4 5 1 kV 2 kV AC Conducted IEC 61000 4 6 3V Power frequency IEC 61000 4 8 1A m 50 or 60 Hz magnetic field Voltage dips and IEC 61000 4 11 gt 95 reduction 0 5 period interruptions 30 reduction 25 periods Harmonics EN 61000 3 2 IEC 61000 3 2 Flicker EN 61000 3 3 IEC 61000 3 3 Management ProCurve Manager Plus ProCurve Manager included command line Standards and protocols DA 13032 invent Worldwide Version 1 March 10 2008 intertace Web browser contiguration menu out of band management serial RS 232C Device Management HTML and telnet management General Protocols IEEE 802 1D MAC Bridges IEEE 802 1p Priority IEEE 802 1Q VLANs IEEE 802 1v VLAN classitication by Protocol and Port IEEE 802 1w Rapid Reconfiguration of Spanning Tree IEEE 802 3ad Link Aggregation Control Protocol LACP IEEE 802 3at Power over Ethernet IEEE 802 3x Flow Control RFC 768 UDP RFC 783 TFTP Protocol revision 2 RFC 792 ICMP RFC 7973 TCP RFC 826 ARP RFC 854 TELNET RFC 951 BOOTP RFC 1542 BOOTP Extensions RFC 2030 Simple Network Time Protocol SNTP v4 RFC 2131 DACP RFC 3046 DHCP Relay Agent Information Option IP Multicast RFC 3376 IGMPv3 MIBs RFC 1213 MIB II RFC 1493 Bridge MIB
4. LLDP automated device discovery protocol tor easy mapping by network management applicationsLLDP MED Media Endpoint Discovery a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones IP multicast snooping and data driven IGMP automatically prevents flooding of IP multicast traffic O invent DA 13032 Worldwide Version 1 March 10 2008 Page 2 Qu ickS pecs ProCurve Switch 2610 Series Overview Quality of Service QoS Class of Service CoS sets the IEEE 802 1 priority tag based on IP address IP Type of Service ToS L3 protocol TCP UDP port number source port and DiffServ Layer 4 prioritization enables prioritization based on TCP UDP port numbers Traffic prioritization IEEE 802 1 allows real time traffic classification into 8 priority levels mapped to 4 queues Manageability invent RMON XRMON and sFlow provide advanced monitoring and reporting capabilities for statistics history alarms and events Friendly port names allow assignment of descriptive names to ports Uni Directional Link Detection UDLD monitors a link between two switches and blocks the ports on both ends of the link it the link goes down at any point between the two devices Stacking capability single IP address management for a virtual stack of up to 16 switches including the ProCurve 2500 series 2510 series 2600 series 2610 series 281
5. Manager Plus ProCurve Manager included command line intertace Web browser contiguration menu out of band management serial RS 232C Device Management HTML and telnet management Worldwide Version 1 March 10 2008 Page 9 Qu ickSpecs ProCurve Switch 2610 Series Technical Specifications General Protocols IEEE 802 1D MAC Bridges IEEE 802 1p Priority IEEE 802 1Q VLANs IEEE 802 1v VLAN classitication by Protocol and Port IEEE 802 1w Rapid Reconfiguration of Spanning Tree IEEE 802 3ad Link Aggregation Control Protocol LACP IEEE 802 3af Power over Ethernet IEEE 802 3x Flow Control RFC 768 UDP RFC 783 TFTP Protocol revision 2 RFC 792 ICMP RFC 793 TCP RFC 826 ARP RFC 854 TELNET RFC 951 BOOTP RFC 1542 BOOTP Extensions RFC 2030 Simple Network Time Protocol SNTP v4 RFC 2131 DHCP RFC 3046 DHCP Relay Agent Information Option IP Multicast RFC 3376 IGMPv3 MIBs RFC 1213 MIB II RFC 1493 Bridge MIB RFC 2021 RMONv2 MIB RFC 2096 IP Forwarding Table MIB RFC 2613 SMON MIB RFC 2618 RADIUS Client MIB RFC 2665 Ethernet Like MIB RFC 2668 802 3 MAU MIB RFC 2674 802 1p and IEEE 802 1Q Bridge MIB RFC 2737 Entity MIB Version 2 RFC 2863 The Interfaces Group MIB Network Management IEEE 802 1AB Link Layer Discovery Protocol LLDP RFC 3164 BSD syslog Protocol RFC 3176 sFlow ANSI TIA 1057 LLDP Media Endpoint Discovery LLDP MED SNMPv1 v2c v3 Security IEEE 802 1X Port Based Network Acce
6. RFC 2021 RMON v2 MIB RFC 2096 IP Forwarding Table MIB RFC 2613 SMON MIB RFC 2618 RADIUS Client MIB RFC 2665 Ethernet Like MIB Page 5 Qu ickS pecs ProCurve Switch 2610 Series Technical Specifications RFC 2668 802 3 MAU MIB RFC 2674 802 1p and IEEE 802 1Q Bridge MIB RFC 2737 Entity MIB Version 2 RFC 2863 The Interfaces Group MIB Network Management IEEE 802 1AB Link Layer Discovery Protocol LLDP RFC 3164 BSD syslog Protocol RFC 3176 sFlow ANSI TIA 1057 LLDP Media Endpoint Discovery LLDP MED SNMPv1 v2c v3 Security IEEE 802 1X Port Based Network Access Control RFC 1492 TACACS Secure Sockets Layer SSL SSHv1 SSHv2 Secure Shell ProCurve Switch 2610 48 Ports 48 auto sensing 10 100 ports J9088A IEEE 802 3 Type 10Base T IEEE 802 3u Type 100Base TX Media Type Auto MDIX Duplex half or full 1 RJ 45 serial console port 2 auto sensing 10 100 1000 ports IEEE 802 3 Type 10Base T IEEE 802 3u Type 100Base TX IEEE 802 3ab Type 1000Base T Duplex 1OBase T 1 00Base TX half or full 1000Base T full only 2 open mini GBIC SFP slots Physical characteristics Dimensions 9 3 d x 17 4 w x 1 73 h in D x W x A 23 62 x 44 2 x 4 39 cm 1U height Weight fully loaded 10 75 lb 4 88 kg Memory and processor Processor type and speed MIPS 300 MHz Flash capacity 16 MB SDRAM 128 MB SDRAM Packet buffer size 2 MB Mounting Mounts in an ElA standard 19 in telco rack or equipment cabinet hardware inclu
7. TELNET RFC 951 BOOTP RFC 1542 BOOTP Extensions RFC 2030 Simple Network Time Protocol SNTP v4 REG 2134 DACP RFC 3046 DHCP Relay Agent Information Option IP Multicast RFC 3376 IGMPv3 Page 14 QuickSpecs ProCurve Switch 2610 Series Technical Specifications invent DA 13032 MIBs RFC 1213 MIB II RFC 1493 Bridge MIB RFC 2021 RMONv2 MIB RFC 2096 IP Forwarding Table MIB RFC 2613 SMON MIB RFC 2618 RADIUS Client MIB RFC 2665 Ethernet Like MIB RFC 2668 802 3 MAU MIB RFC 2674 802 1p and IEEE 802 1Q Bridge MIB RFC 2737 Entity MIB Version 2 RFC 2863 The Interfaces Group MIB Network Management IEEE 802 1AB Link Layer Discovery Protocol LLDP RFC 3164 BSD syslog Protocol RFC 3176 sFlow ANSI TIA 1057 LLDP Media Endpoint Discovery LLDP MED SNMPv1 v2c v3 Security IEEE 802 1X Port Based Network Access Control RFC 1492 TACACS Secure Sockets Layer SSL SSHv1 SSHv2 Secure Shell Worldwide Version 1 March 10 2008 Page 15 QuickSpecs ProCurve Switch 2610 Series Accessories ProCurve Gigabit SX LC Ports Mini GBIC J4858C Physical characteristics A small torm tactor pluggable SFP gigabit SX transceiver that provides a full duplex gigabit solution up to 550 meters on multimode fiber Cabling ProCurve Gigabit LX LC Ports Mini GBIC J4859C Physical characteristics A small torm tactor pluggable SFP gigabit LX transceiver that provides a full duplex gigabit s
8. e User system Auto discovery of e RADIUS servers e Realms e Users ProCurve Network ProCurve Network Immunity Manager is a plug in module for ProCurve Manager Plus 2 2 that provides Immunity Manager 1 0 a rich toolset to manage internal network threat detection and response in a wired and wireless network 50 device license environment J9060A ProCurve Network ProCurve Network Immunity Manager is a plug in module for ProCurve Manager Plus 2 2 that provides Immunity Manager 1 0 a rich toolset to manage internal network threat detection and response in a wired and wireless network 100 device license environment J9061A ProCurve Network ProCurve Network Immunity Manager is a plug in module for ProCurve Manager Plus 2 2 that provides Immunity Manager 1 0 a rich toolset to manage internal network threat detection and response in a wired and wireless network unlimited device license environment J9062A DA 13032 invent Worldwide Version 1 March 10 2008 Page 22 QuickSpecs ProCurve Switch 2610 Series Accessories ProCurve Manager Plus 2 3 upgrade trom PCM 1 6 or newer J9056A ProCurve Manager Plus 2 3 50 device upgrade adds new PCM 2 2 functionality to previously purchased PCM 1 6 or PCM 1 5 releases invent System requirements Minimum system hardware Recommended system hardware Recommended software For networks having 50 to 250 managed devices ProCurve recommends the fo
9. 0 series 2900 series 3400cl series 35001 series 4200vl series 6108 6200yl 24G mGBIC and 6400cl series Find Fix and Intorm finds and fixes common network problems automatically then informs administrator Troubleshooting ingress egress port monitoring enables network problem solving Multiple configuration files allow multiple contig tiles to be stored to flash image Dual tlash images provides independent primary and secondary OS tiles for backup while upgrading Software updates tree downloads from the Web Monitor and diagnostics Port mirroring enables traffic on a port to be simultaneously sent to a network analyzer tor monitoring Industry leading warranty Lifetime warranty for as long as you own the product with next business day advance replacement available in most countries DA 13032 Worldwide Version 1 March 10 2008 Page 3 QuickSpecs ProCurve Switch 2610 Series Technical Specitications ProCurve Switch 2610 Ports 48 PWR JI9089A Physical characteristics Memory and processor Mounting Performance Environment Electrical characteristics Safety DA 13032 invent 48 auto sensing 10 100 ports IEEE 802 3 Type 10Base T IEEE 802 3u Type 100Base TX Media Type Auto MDIX Duplex half or full 1 RJ 45 serial console port 2 auto sensing 10 100 1000 ports IEEE 802 3 Type 10Base T IEEE 802 3u Type 100Base TX IEEE 802 3ab Type 1000Base T Duplex 10Base T 100Base IX half or ful
10. 054B 100 FX SFP LC Transceiver on the ProCurve Mini GBICs and SFPs Manuals Web page for supported platforms and minimum software requirements to support this product Ports Physical characteristics Mounting DA 13032 6 redundant power supply ports Restrictions Each port can provide redundant 12 V power to a connected switch only one port can provide power at a given time 2 external power supply ports Restrictions Provides 50 VDC external PoE to up to two switch devices provides max of 408 W full power to one device and half power 204 W each if connected to two devices Dimensions 12 83 d x 17 44 w x 1 73 h in 82 59 x 44 3 x 4 39 cm 1U height Weight 11 78 lb 5 34 kg Fully loaded 1U rack mountable and wall mountable enclosure using standard mounting hardware Worldwide Version 1 March 10 2008 Page 17 QuickSpecs ProCurve Switch 2610 Series Accessories ProCurve 610 External Power Supply O invent Environment Electrical characteristics Safety Emissions Immunity Management NOTE Operating temperature Operating relative humidity Non operating Storage temperature Non operating Storage relative humidity Altitude Acoustic Description Voltage Current Power consumption RPS power PoE power Frequency CSA 22 2 No 60950 EN 60950 IEC 60950 UL 60950 FCC Class A VCCI Class A 32 F to 131 F 0 C to 55 C 15 to 95
11. 104 F 40 C non condensing 40 F to 158 F 40 C to 70 C 15 to 95 149 F 65 C non condensing up to 15000 ft 4 6 km Noise emission LwA 59 2 dB at virtual workspace according to DIN 45635 T 19 The unit automatically adjusts to any voltage between 100 240 V and either 50 or 60 Hz 100 240 VAC 93A 800 W 180 W 408 W 50 60 Hz EN 55022 CISPR 22 Class A EN ESD Radiated EFT Burst Surge Conducted EN 55024 CISPR 24 IEC 61000 4 2 4 kV CD 8 kV AD IEC 61000 4 3 3 V m IEC 61000 4 4 1 0 kV power line 0 05 kV signal line IEC 61000 4 5 1 kV 2 kV AC IEC 61000 4 6 3 V Power frequency magnetic IEC 61000 4 8 1 A m 50 or 60 Hz field Voltage dips and interruptions Harmonics Flicker IEC 61000 4 11 gt 95 reduction 0 5 period 30 reduction 25 periods EN 61000 3 2 IEC 61000 3 2 EN 61000 3 3 IEC 61000 3 3 Provides information via port interfaces of attached devices Supported devices ProCurve Switch 2600 PWR series ProCurve Switch 2610 series ProCurve Switch 2610 PWR series ProCurve Switch 2800 series ProCurve Switch 2810 series ProCurve Switch 5300xl series ProCurve Switch 3400cl series ProCurve Switch 6400cl series ProCurve Secure Router 7000dl series Ports 4 external power supply ports Restrictions Provides 50 VDC external PoE power to up to four switch devices each pair of EPS ports provides max of DA 13032 Worldwide Version 1 March 10
12. 2008 Page 18 QuickSpecs Accessories ProCurve Switch 2610 Series J8169A The ProCurve 610 External Physical Power Supply EPS has 4 EPS ports and provides power to connected Switch Mounting x 10 100 TX PoE modules characteristics Environment Electrical characteristics Satety Emissions Immunity Management DA 13032 invent 408 W tull power to one device and halt power 204 W each it connected to two devices total 816 W of power Dimensions 19 02 d x 17 3 w x 1 73 h in 48 31 x 43 94 x 4 39 cm 1U height Weight 16 44 lb 7 46 kg Fully loaded 1U rack mountable and wall mountable enclosure using standard mounting hardware Operating temperature Operating relative humidity Non operating Storage temperature Non operating Storage relative humidity Altitude Acoustic 32 F to 122 F 0 C 16 50 15 to 95 104 F 40 C non condensing 40 F to 158 F 40 C to 70 C 15 to 95 149 F 65 C non condensing up to 15000 ft 4 6 km Noise emission LwA 58 dB at virtual workspace according to DIN 45635 T 19 Description The unit automatically adjusts to any voltage between 110 240 V and either 50 or 60 Hz Voltage 110 240 VAC Current 11 6A Power consumption 1000 W PoE power 816 W Frequency 50 60 Hz NOTE For Japan the unit only operates at 200 V 50 Hz and 6A CSA 22 2 No 60950 EN 60950 IEC 60950 UL 60950 FCC Class A VC
13. B storage 1000 MB NIC tor PCM assuming a dedicated server and including ProCurve Identity Driven Manager Mobility Manager and Network Immunity Manager on the same server Microsoft Windows 2003 Server Windows XP SP2 Windows XP Professional SP2 For networks having 250 to 2 000 managed devices ProCurve recommends the following Minimum system hardware Recommended system hardware Recommended software Browsers Supported platforms Additional requirements 3 0 GHz Intel Pentium 4 or equivalent processor 3 GB RAM memory 40 GB storage 1000 MB NIC for PCM as a standalone application assuming a dedicated server Intel Xeon or equivalent processor 4 GB RAM memory 80 GB storage 1000 MB NIC tor PCM assuming a dedicated server and including ProCurve Identity Driven Manager Mobility Manager and Network Immunity Manager on the same server Microsoft Windows 2003 Server Windows XP SP2 Windows XP Professional SP2 Microsoft Internet Explorer version 5 0 or later HP OpenView Network Node Manager version 6 41 or 7 01 or 7 5 NOTE ProCurve Network Immunity Manager when loaded on PCM 2 3 can sample up to 500 managed ports using sFlow or XRMON NOTE Additional processing power may be necessary for extensive traffic monitoring NOTE Unlimited license means that ProCurve does not impose a limit on the number of devices attached to the network as a condition of the license NOTE Some degradation in performance may be expecte
14. CI Class A EN 55022 CISPR 22 Class A EN ESD Radiated EFT Burst Surge Conducted EN 55024 CISPR 24 IEC 61000 4 2 4 kV CD 8 kV AD IEC 61000 4 3 3 V m IEC 61000 4 4 1 0 kV power line 0 5 kV signal line IEC 61000 4 5 1 kV 2 kV AC IEC 61000 4 6 3 V Power frequency magnetic IEC 61000 4 8 1 A m 50 or 60 Hz field Voltage dips and interruptions Harmonics Flicker IEC 61000 4 11 gt 95 reduction 0 5 period 30 reduction 25 periods EN 61000 3 2 IEC 61000 3 2 EN 61000 3 3 IEC 61000 3 3 Unmanaged power supply provides information via LEDs or through port interfaces of attached devices NOTE Supported devices ProCurve Switch 2600 PWR series ProCurve Switch 2610 PWR series ProCurve Switch 5300xl series Worldwide Version 1 March 10 2008 Page 19 QuickSpecs ProCurve Switch 2610 Series Accessories ProCurve Manager 2 3 System requirements Windows Server based network management for ProCurve LAN products invent Minimum system hardware Recommended system hardware Recommended software For networks having 50 to 250 managed devices ProCurve recommends the following 2 0 GHz Intel Pentium 4 or equivalent processor 2 GB RAM memory 10 GB storage 1000 MB NIC for PCM as a standalone application assuming a dedicated server 3 0 GHz Intel Pentium 4 or equivalent processor 3 GB RAM memory 40 GB storage 1000 MB NIC tor PCM assuming a dedicate
15. Curve recommends the following Minimum system hardware Recommended system hardware Recommended software Browsers Supported platforms Additional requirements 3 0 GHz Intel Pentium 4 or equivalent processor 3 GB RAM memory 40 GB storage 1000 MB NIC for PCM as a standalone application assuming a dedicated server Intel Xeon or equivalent processor 4 GB RAM memory 80 GB storage 1000 MB NIC tor PCM assuming a dedicated server and including ProCurve Identity Driven Manager Mobility Manager and Network Immunity Manager on the same server Microsoft Windows 2003 Server Windows XP SP2 Windows XP Professional SP2 Microsoft Internet Explorer version 5 0 or later HP OpenView Network Node Manager version 6 41 or 7 01 or 7 5 NOTE ProCurve Network Immunity Manager when loaded on PCM 2 3 can sample up to 500 managed ports using sFlow or XRMON NOTE Additional processing power may be necessary for extensive traffic monitoring NOTE Unlimited license means that ProCurve does not impose a limit on the number of devices attached to the network as a condition of the license NOTE Some degradation in performance may be expected the greater the number of devices attached to the network NOTE Specifications subject to change DA 13032 Worldwide Version 1 March 10 2008 Page 24 QuickSpecs ProCurve Switch 2610 Series Accessories ProCurve Manager Plus 2 3 upgrade 100 device license J9058A
16. Qu ickSpecs ProCurve Switch 2610 Series Overview Models ProCurve Switch 2610 48 PWR J9089A ProCurve Switch 2610 48 J9088A ProCurve Switch 2610 24 PWR J9087A ProCurve Switch 2610 24 12PWR J9086A ProCurve Switch 2610 24 J9085A Introduction The ProCurve Switch 2610 Series consists of five switches the 2610 24 and 2610 48 provide 24 and 48 ports of 10 100 connectivity The 2610 24 is fanless ensuring quiet operation and making it ideal for deployment in open spaces The 2610 24 12PWR 2610 24 PWR and 2610 48 PWR are IEEE 802 3af compliant for Power over Ethernet PoE and provide up to 15 4 W for 12 24 and 48 ports The 2610 24 12PWR has 24 10 100 ports and provides 12 ports of PoE All switches include two 10 100 1000Base T ports and two mini GBIC slots for Gigabit uplink connectivity An optional redundant external power supply is also available to provide redundancy in the event of a power supply failure With static routing robust security and management features free lifetime warranty and free software updates the 2610 series is a cost effective solution for customers who are building converged enterprise edge networks Features and Benefits Connectivity e IEEE 802 3af Power over Ethernet provides up to 15 4 W per port to IEEE 802 3af compliant PoE powered devices such as IP phones wireless access points and security cameras e Pre standard PoE support detects and provides power to pre standard PoE devices see list of s
17. be necessary for extensive traffic monitoring NOTE Unlimited license means that ProCurve does not impose a limit on the number of devices attached to the network as a condition of the license NOTE Some degradation in performance may be expected the greater the number of devices attached to the network NOTE Specifications subject to change DA 13032 Worldwide Version 1 March 10 2008 Page 23 QuickSpecs ProCurve Switch 2610 Series Accessories ProCurve Manager Plus 2 3 50 device license J9057A ProCurve Manager Plus provides a starter license for advanced device management of up to 50 ProCurve devices including integration with the HP OpenView Network Node Manager product invent System requirements Minimum system hardware Recommended system hardware Recommended software For networks having 50 to 250 managed devices ProCurve recommends the following 2 0 GHz Intel Pentium 4 or equivalent processor 2 GB RAM memory 10 GB storage 1000 MB NIC for PCM as a standalone application assuming a dedicated server 3 0 GHz Intel Pentium 4 or equivalent processor 3 GB RAM memory 40 GB storage 1000 MB NIC tor PCM assuming a dedicated server and including ProCurve Identity Driven Manager Mobility Manager and Network Immunity Manager on the same server Microsoft Windows 2003 Server Windows XP SP2 Windows XP Professional SP2 For networks having 250 to 2 000 managed devices Pro
18. characteristics Maximum heat dissipation 142 BTU hr 149 81 kJ hr Voltage 100 127 200 240 VAC Current 0 8 0 4A Power consumption 41 W Frequency 50 60 Hz Safety CSA 22 2 No 60950 UL 60950 IEC 60950 EN 60950 Emissions FCC Class A VCCI Class A EN 55022 CISPR 22 Class A Immunity EN EN 55024 CISPR 24 ESD IEC 61000 4 2 4 kV CD 8 kV AD Radiated IEC 61000 4 3 3V m EFT Burst IEC 61000 4 4 1 0 kV power line 0 5kV signal line Surge IEC 61000 4 5 1 kV 2 kV AC Conducted IEC 61000 4 6 3V Power frequency IEC 61000 4 8 1A m 50 or 60 Hz magnetic field Voltage dips and IEC 61000 4 11 gt 95 reduction 0 5 period interruptions 30 reduction 25 periods Harmonics EN 61000 3 2 IEC 61000 3 2 Flicker EN 61000 3 3 IEC 61000 3 3 Management ProCurve Manager Plus ProCurve Manager included command line Standards and protocols DA 13032 invent Worldwide Version 1 March 10 2008 intertace Web browser contiguration menu out of band management serial RS 232C Device Management HTML and telnet management General Protocols IEEE 802 1D MAC Bridges IEEE 802 1p Priority IEEE 802 1Q VLANs IEEE 802 1v VLAN classitication by Protocol and Port IEEE 802 1w Rapid Reconfiguration of Spanning Tree IEEE 802 3ad Link Aggregation Control Protocol LACP IEEE 802 3at Power over Ethernet IEEE 802 3x Flow Control RFC 768 UDP RFC 783 TFTP Protocol revision 2 RFC 792 ICMP RFG 793 TCP RFC 826 ARP RFC 854
19. d server and including ProCurve Identity Driven Manager Mobility Manager and Network Immunity Manager on the same server Microsoft Windows 2003 Server Windows XP SP2 Windows XP Professional SP2 For networks having 250 to 2 000 managed devices ProCurve recommends the following Minimum system hardware Recommended system hardware Recommended software Browsers Supported platforms Additional requirements 3 0 GHz Intel Pentium 4 or equivalent processor 3 GB RAM memory 40 GB storage 1000 MB NIC for PCM as a standalone application assuming a dedicated server Intel Xeon or equivalent processor 4 GB RAM memory 80 GB storage 1000 MB NIC tor PCM assuming a dedicated server and including ProCurve Identity Driven Manager Mobility Manager and Network Immunity Manager on the same server Microsott Windows 2003 Server Windows XP SP2 Windows XP Professional SP2 Microsoft Internet Explorer version 5 0 or later HP OpenView Network Node Manager version 6 41 or 7 01 or 7 5 optional NOTE ProCurve Network Immunity Manager when loaded on PCM 2 3 can sample up to 500 managed ports using sFlow or XRMON NOTE Unlimited license means that ProCurve does not impose a limit on the number of devices attached to the network as a condition of the license Some degradation in performance may be expected the greater the number of devices attached to the network NOTE Specifications subject to change DA 13032 Worldwi
20. d the greater the number of devices attached to the network NOTE Specifications subject to change DA 13032 Worldwide Version 1 March 10 2008 Page 26 Qu ickS pecs ProCurve Switch 2610 Series Accessories 2008 Hewlett Packard Development Company L P The information contained herein is subject to change without notice The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and Services Nothing herein should be construed as constituting an additional warranty HP shall not be liable tor technical or editorial errors or omissions contained herein To learn more visit www procurve com Information is subject to change without notice T DA 13032 Worldwide Version 1 March 10 2008 Page 27
21. de Version 1 March 10 2008 Page 20 Qu ickSpecs ProCurve Switch 2610 Series Accessories ProCurve Identity Driven Manager 2 2 base product 500 user license J9012A ProCurve Identity Driven Manager is a plug in to ProCurve Manager Plus that dynamically applies security and performance settings based on user device location time and client system state 500 user license ProCurve Identity Driven Manager 2 2 base product upgrade from 1 0 J901 3A Identity Driven Manager 2 2 500 user upgrade from 1 0 allows existing 1 0 customers to get the features of 2 0 with a 500 user limitation O invent System requirements Please see ProCurve Manager Plus for system requirements RADIUS server support Free RADIUS Funk Steelbelted RADIUS Server Microsott IAS Features Intuitive Explorer style intertace OpenView NNM integration Application of policies by user identity e Auto VLAN assignment e Auto set quality of service by user e Auto set bandwidth assignment by user Rule based access rights deployment Dynamic rights assignment based on e lime Location e User system Auto discovery of RADIUS servers e Realms e Users NOTE The base product for Identity Driven Manager allows for managing up to 500 users Customers may add users in quantities of 2 000 by purchasing J9014A System requirements Please see ProCurve Manager Plus tor system requirements RADIUS server support Fre
22. ded 100 O differential 4 pair unshielded twisted pair UTP or shielded twisted pair STP balanced complying with IEEE 802 3ab 1000Base T Maximum distance 100 m NOTE When used in the ProCurve Switch gl 20 Port 10 100 1000 Module J4908A the J8177B mini GBIC can be installed in either the upper or lower mini GBIC port but will block access to the other port NOTE See the document titled Support for the J8177B 1000Base T Mini GBIC on the ProCurve Mini GBICs and SFPs Manuals Web page for supported platforms and minimum software requirements to support this product NOTE The J8177B gigabit copper mini GBIC is not supported on dual personality ports Ports Physical Characteristics Environment Cabling 1 LC 100Base FX port IEEE 802 3u Type 100Base FX Duplex half or full Dimensions 2 7 d x 0 54 w x 0 48 h in 6 86 x 1 38 x 1 22 cm Weight 0 06 Ib 0 03 kg Operating temperature 32 F to 158 F 0 C to 70 C Operating relative 5 to 95 humidity Non operating Storage 40 F to 185 F 40 C to 85 C temperature Non operating Storage 5 to 85 relative humidity Altitude up to 10 000 tt 3 km Type 62 5 125 um or 50 125 um core cladding diameter graded index low metal content multimode fiber optic complying with ITU T G 651 and ISO IEC 793 2 Type Alb or Ala respectively Maximum distance 2 km full duplex or 412 m half duplex NOTE See the document titled Support for the J9
23. ded horizontal surface mounting only Performance 100 Mb Latency lt 6 2 us LIFO 1000 Mb Latency lt 4 4 us LIFO Throughput up to 13 0 million pps Routing Switching 17 6 Gbps capacity Routing table size 8 000 entries Environment Operating temperature 32 F to 122 F 0 C to 50 C Operating relative 15 to 95 104 F 40 C non condensing humidity Non operating 40 F to 158 F 40 C to 70 C Storage temperature Non operating 15 to 90 149 F 65 C non condensing Storage relative humidity DA 13032 Worldwide Version 1 March 10 2008 Page 6 invent QuickSpecs ProCurve Switch 2610 Series Technical Specitications Alitude Acoustic up to 10000 ft 3 km Power 45 dB Pressure 36 2 dB DIN 45635T 19 per ISO 7779 Electrical characteristics Maximum heat dissipation 285 BTU hr 300 67 kJ hr Voltage 100 127 200 240 VAC Current 1 3 0 8A Power consumption 66 W Frequency 50 60 Hz Satety CSA 22 2 No 60950 UL 60950 IEC 60950 EN 60950 Emissions FCC Class A VCCI Class A EN 55022 CISPR 22 Class A Immunity EN EN 55024 CISPR 24 ESD IEC 61000 4 2 4 kV CD 8 kV AD Radiated IEC 61000 4 3 3V m EFT Burst IEC 61000 4 4 1 0 kV power line 0 5kV signal line Surge IEC 61000 4 5 1 kV 2 kV AC Conducted IEC 61000 4 6 3V Power frequency IEC 61000 4 8 1A m 50 or 60 Hz magnetic field Voltage dips and IEC 61000 4 11 gt 95 reduction 0 5 period interruptions 30 reduction 25 period
24. e 10Base T IEEE J9085A 802 3u Type 100Base TX Media Type Auto MDIX Duplex half or full 1 RJ 45 serial console port 2 auto sensing 10 100 1000 ports IEEE 802 3 Type 10Base T IEEE 802 3u Type 100Base TX IEEE 802 3ab Type 1000Base T Duplex 10Base T 100Base IX halt or full 1000Base T full only 2 open mini GBIC SFP slots Physical characteristics Dimensions 9 3x 17 4 x 1 78 in D x W x A 23 62 x 44 2 x 4 39 cm 1U height Weight fully loaded 10 2 lb 4 63 kg Memory and processor Processor type and speed MIPS 300 MHz Flash capacity 16 MB SDRAM 128 MB SDRAM Packet buffer size 1 MB Mounting Mounts in an ElA standard 19 in telco rack or equipment cabinet hardware included horizontal surface mounting only Performance 100 Mb Latency lt 4 1 us LIFO 1000 Mb Latency lt 2 9 us LIFO Throughput up to 9 5 million pps Routing Switching 12 8 Gbps capacity Routing table size 8 000 entries Environment Operating temperature 32 F to 122 F 0 C to 50 C Operating relative 15 to 95 104 F 40 C non condensing humidity Non operating 40 F to 158 F 40 C to 70 C Storage temperature Non operating 15 to 90 149 F 65 C non condensing Storage relative humidity Alitude up to 10000 ft 3 km Acoustic Power 62 dB Pressure O dB No Fan DA 13032 Worldwide Version 1 March 10 2008 Page 13 invent QuickSpecs ProCurve Switch 2610 Series Technical Specifications Electrical
25. e MIB RFC 2737 Entity MIB Version 2 RFC 2863 The Interfaces Group MIB Network Management IEEE 802 1AB Link Layer Discovery Protocol LLDP RFC 3164 BSD syslog Protocol RFC 3176 sFlow ANSI TIA 1057 LLDP Media Endpoint Discovery LLDP MED SNMPv1 v2c v3 Security IEEE 802 1X Port Based Network Access Control RFC 1492 TACACS Secure Sockets Layer SSL SSHv1 SSHv2 Secure Shell 24 auto sensing 10 100 ports IEEE 802 3 Type 10Base T IEEE 802 3u Type 100Base TX Media Type Auto MDIX Duplex half or full 1 RJ 45 serial console port 2 auto sensing 10 100 1000 ports IEEE 802 3 Type 10Base T IEEE 802 3u Type 100Base TX IEEE 802 3ab Type 1000Base T Duplex 10Base T 100Base IX half or full 1000Base T full only 2 open mini GBIC SFP slots Dimensions 12 5 d x 17 4 w x 1 73 h in D x W x A 31 75 x 44 2 x 4 39 cm 1U height Weight fully loaded 15 05 lb 6 83 kg Fully loaded Processor type and speed MIPS 300 MHz Flash capacity 16 MB SDRAM 128 MB SDRAM Packet buffer size 1 MB Mounts in an ElA standard 19 in telco rack or equipment cabinet hardware included horizontal surface mounting only 100 Mb Latency lt 4 1 us LIFO 1000 Mb Latency lt 2 9 us LIFO Worldwide Version 1 March 10 2008 Page 8 QuickSpecs ProCurve Switch 2610 Series Technical Specitications invent Environment Electrical characteristics Safety Emissions Immunity Management Standards and pro
26. eRADIUS on Red Hat ES3 or ES4 or SuSe Linux 9 Funk Steelbelted RADIUS Server Microsoft IAS Features Intuitive Explorer style intertace OpenView NNM integration Application of policies by user identity e Auto VLAN assignment e Auto set quality of service by user e Auto set bandwidth assignment by user Rule based access rights deployment Dynamic rights assignment based on e lime e Location e User system Auto discovery of RADIUS servers Realms e Users NOTE This upgrade provides Identity Driven Manager 2 0 which allows for managing up to 500 users Customers may add users in quantities of 2 000 by purchasing J9014A DA 13032 Worldwide Version 1 March 10 2008 Page 21 QuickSpecs ProCurve Switch 2610 Series Accessories ProCurve Identity Driven System requirements Manager 2 2 add 2 000 users license RADIUS server support J901 4A Adds support for 2 000 Features additional users to the base Identity Driven Manager 2 2 product This license adds support for an additional 2 000 users to the IDM base products of J9O12A or J9OI3A Free RADIUS Funk Steelbelted RADIUS Server Microsoft IAS Intuitive Explorer style interface OpenView NNM integration Application of policies by user identity e Auto VLAN assignment e Auto set quality of service by user e Auto set bandwidth assignment by user Rule based access rights deployment Dynamic rights assignment based on e lime e Location
27. er that provides a full duplex gigabit solution up to 70 km on singlemode fiber Cabling O invent DA 13032 Worldwide Version 1 March 10 2008 1 LC 1000Base LH port no IEEE standard exists for 1550 nm optics Duplex full only Dimensions 2 17 d x 0 60 w x 0 46 h in 5 5 x 1 53 x 1 18 cm Weight 0 04 Ib 0 02 kg Type Low metal content single mode fiber optic complying with ITU T G 652 and ISO IEC 793 2 Type B1 Maximum distance e 70 km Page 16 QuickSpecs ProCurve Switch 2610 Series Accessories ProCurve Gigabit 1000Base T Mini BIC J8177B A small form factor pluggable SFP gigabit copper transceiver that provides a tull duplex gigabit solution up to 100 meters on Category 5 or better cable ProCurve 100 FX SFP LC Transceiver J9054B A small form factor pluggable SFP 100 FX transceiver that provides 100 Mbps full duplex connectivity up to 2 km on multimode fiber ProCurve 600 Redundant External Power Supply J8168A The ProCurve 600 Redundant and External Power Supply RPS EPS has 6 RPS ports and 2 EPS ports and supplies backup and Power over Ethernet power O invent Ports Physical characteristics Cabling 1 RJ 45 1000Base T port IEEE 802 3ab Type 1000Base T Duplex full only Dimensions 2 7 1 d x 0 54 w x 0 55 h in 6 88 x 1 37 x 1 4 cm Weight 0 06 Ib 0 03 kg Type 1000Base T Category 5 5E or better recommen
28. gement HTML and telnet management General Protocols IEEE 802 1D MAC Bridges IEEE 802 1 Priority IEEE 802 1Q VLANs IEEE 802 1v VLAN classitication by Protocol and Port IEEE 802 1w Rapid Reconfiguration of Spanning Tree IEEE 802 3ad Link Aggregation Control Protocol LACP IEEE 802 3at Power over Ethernet IEEE 802 3x Flow Control RFC 768 UDP RFC 783 TFTP Protocol revision 2 RFC 792 ICMP RFC 793 TCP RFC 826 ARP RFC 854 TELNET RFC 951 BOOTP RFC 1542 BOOTP Extensions RFC 2030 Simple Network Time Protocol SNTP v4 RFC 2131 DHCP RFC 3046 DHCP Relay Agent Information Option IP Multicast RFC 3376 IGMPv3 MIBs RFC 1213 MIB II RFC 1493 Bridge MIB RFC 2021 RMON v2 MIB RFC 2096 IP Forwarding Table MIB RFC 2613 SMON MIB RFC 2618 RADIUS Client MIB RFC 2665 Ethernet Like MIB RFC 2668 802 3 MAU MIB RFC 2674 802 1p and IEEE 802 1Q Bridge MIB RFC 2737 Entity MIB Version 2 RFC 2863 The Interfaces Group MIB Worldwide Version 1 March 10 2008 Page 12 Qu ickS pecs ProCurve Switch 2610 Series Technical Specitications Network Management IEEE 802 1AB Link Layer Discovery Protocol LLDP RFC 3164 BSD syslog Protocol RFC 3176 sFlow ANSI TIA 1057 LLDP Media Endpoint Discovery LLDP MED SNMPv1 v2c v3 Security IEEE 802 1X Port Based Network Access Control RFC 1492 TACACS Secure Sockets Layer SSL SSHv1 SSHv2 Secure Shell ProCurve Switch 2610 24 Ports 24 auto sensing 10 100 ports IEEE 802 3 Typ
29. inistration by using a password authentication server Secure Shell SSHv2 encrypts all transmitted data tor secure remote command line interface CLI access over IP networks Port monitoring for network threats Provides sampled port traffic using sFlow technology to the ProCurve Network Immunity Manager application for Network Behavior Anomaly Detection NBAD analysis to detect threats and mitigate threats at the port where the threat originated Secure Sockets Layer SSL encrypts all HTTP trattic allowing secure access to the browser based management GUI in the switch Secure FTP allows secure file transfer to from the switch protects against unwanted tile downloads or unauthorized copying of switch configuration file Switch management logon security can require either RADIUS or TACACS authentication for secure switch CLI logon Dynamic IP lockdown works with DHCP protection to block traffic from unauthorized host preventing IP source address spooting Dynamic ARP protection blocks ARP broadcasts from unauthorized hosts preventing eavesdropping or theft of network data DHCP protection blocks DHCP packets from unauthorized DHCP servers preventing denial of service attacks BPDU port protection blocks Bridge Protocol Data Units BPDU on ports that do not require BPDUs preventing torged BPDU attacks STP Root Guard protects root bridge from malicious attack or configuration mistakes Convergence IEEE 802 1AB Link Layer Discovery Protocol
30. l 1000Base T full only 2 open mini GBIC SFP slots Dimensions 13 5 x 17 4 x 1 73 in 34 29 x 44 2 x 4 39 cm D x W x H 1U height Weight fully loaded 16 7 Ib 7 58 kg Processor type and speed MIPS 300 MHz Flash capacity 16 MB SDRAM 128 MB SDRAM Packet buffer size 2 MB Mounts in an ElA standard 19 in telco rack or equipment cabinet hardware included horizontal surface mounting only 100 Mb Latency lt 6 2 us LIFO 1000 Mb Latency lt 4 4 us LIFO Throughput up to 13 0 million pps Routing Switching 17 6 Gbps capacity Routing table size 8 000 entries Operating temperature 32 F to 122 F 0 C to 50 C Operating relative 15 to 95 104 F 40 C non condensing humidity Non operating 40 F to 158 F 40 C to 70 C Storage temperature Non operating 15 to 90 149 F 65 C non condensing Storage relative humidity Alitude up to 10000 ft 3 km Acoustic Power 59 dB Pressure 53 2 dB DIN 45635T 19 per ISO 7779 Maximum heat dissipation 410 BTU hr 432 55 kJ hr Switch only BTU hr 410 combined switch maxPoE devices at 15 4 W 2281 BTU hr Voltage 100 127 200 240 VAC Current 7 0 3 5A Power consumption 96 W Frequency 50 60 Hz NOTE Power Consumption 96 W without PoE 590 W with PoE CSA 22 2 No 60950 UL 60950 IEC 60950 EN 60950 Worldwide Version 1 March 10 2008 Page 4 QuickSpecs ProCurve Switch 2610 Series Technical Specitications Emissions FCC Class
31. llowing 2 0 GHz Intel Pentium 4 or equivalent processor 2 GB RAM memory 10 GB storage 1000 MB NIC for PCM as a standalone application assuming a dedicated server 3 0 GHz Intel Pentium 4 or equivalent processor 3 GB RAM memory 40 GB storage 1000 MB NIC tor PCM assuming a dedicated server and including ProCurve Identity Driven Manager Mobility Manager and Network Immunity Manager on the same server Microsoft Windows 2003 Server Windows XP SP2 Windows XP Professional SP2 For networks having 250 to 2 000 managed devices ProCurve recommends the following Minimum system hardware Recommended system hardware Recommended software Browsers Supported platforms Additional requirements 3 0 GHz Intel Pentium 4 or equivalent processor 3 GB RAM memory 40 GB storage 1000 MB NIC for PCM as a standalone application assuming a dedicated server Intel Xeon or equivalent processor 4 GB RAM memory 80 GB storage 1000 MB NIC tor PCM assuming a dedicated server and including ProCurve Identity Driven Manager Mobility Manager and Network Immunity Manager on the same server Microsoft Windows 2003 Server Windows XP SP2 Windows XP Professional SP2 Microsoft Internet Explorer version 5 0 or later HP OpenView Network Node Manager version 6 41 or 7 01 or 7 5 NOTE ProCurve Network Immunity Manager when loaded on PCM 2 3 can sample up to 500 managed ports using sFlow or XRMON NOTE Additional processing power may
32. ndows 2003 Server Windows XP SP2 Windows XP Professional SP2 Microsoft Internet Explorer version 5 0 or later HP OpenView Network Node Manager version 6 41 or 7 01 or 7 5 NOTE ProCurve Network Immunity Manager when loaded on PCM 2 3 can sample up to 500 managed ports using sFlow or XRMON NOTE Additional processing power may be necessary for extensive traffic monitoring NOTE Unlimited license means that ProCurve does not impose a limit on the number of devices attached to the network as a condition of the license NOTE Some degradation in performance may be expected the greater the number of devices attached to the network NOTE Specifications subject to change DA 13032 Worldwide Version 1 March 10 2008 Page 25 QuickSpecs ProCurve Switch 2610 Series Accessories ProCurve Manager Plus 2 3 unlimited device license J9059A PCM 2 3 unlimited license provides a PCM license that does not limit the number of devices managed it does NOT require the 50 device license invent System requirements Minimum system hardware Recommended system hardware Recommended software For networks having 50 to 250 managed devices ProCurve recommends the following 2 0 GHz Intel Pentium 4 or equivalent processor 2 GB RAM memory 10 GB storage 1000 MB NIC for PCM as a standalone application assuming a dedicated server 3 0 GHz Intel Pentium 4 or equivalent processor 3 GB RAM memory 40 G
33. olution up to 10 km singlemode or 550 m multimode Cabling 1 LC 1000Base SX port IEEE 802 3z Type 1 000Base Sx Duplex full only Dimensions 2 24 d x 0 54 w x 0 486 h in 5 69 x 1 37 x 1 23 cm Weight 0 04 Ib 0 02 kg Type e 62 5 125 um or 50 125 um core cladding diameter graded index low metal content multimode fiber optic complying with ITU T G 651 and ISO IEC 793 2 Type Alb or Ala respectively Maximum distance 220 m 2 5 m 500 m 550 m 62 5 um core diameter 160 MHz km bandwidth 62 5 um core diameter 200 MHz km bandwidth 50 um core diameter 400 MHz km bandwidth 50 um core diameter 500 MHz km bandwidth A aA aAA 1 LC 1000Base LX port IEEE 802 3z Type 1000Base LX Duplex full only Dimensions 2 24 d x 0 54 w x 0 486 h in 5 69 x 1 37 x 1 23 cm Weight 0 04 Ib 0 02 kg Type Either single mode or multimode e 62 5 125 um or 50 125 um core cladding diameter graded index low metal content multimode fiber optic complying with ITU T G 651 and ISO IEC 793 2 Type Alb or Ala respectively Low metal content single mode fiber optic complying with ITU T G 652 and ISO IEC 793 2 Type B1 Maximum distance e 10 km single mode or 550 m multimode NOTE A mode conditioning patch cord may be needed in some multimode fiber installations ProCurve Gigabit LH LC Ports Mini GBIC J4860C Physical characteristics A small torm tactor pluggable SFP gigabit LH transceiv
34. s Harmonics EN 61000 3 2 IEC 61000 3 2 Flicker EN 61000 3 3 IEC 61000 3 3 Management ProCurve Manager Plus ProCurve Manager included command line Standards and protocols DA 13032 invent Worldwide Version 1 March 10 2008 intertace Web browser contiguration menu out of band management serial RS 232C Device Management HTML and telnet management General Protocols IEEE 802 1D MAC Bridges IEEE 802 1p Priority IEEE 802 1Q VLANs IEEE 802 1v VLAN classitication by Protocol and Port IEEE 802 1w Rapid Reconfiguration of Spanning Tree IEEE 802 3ad Link Aggregation Control Protocol LACP IEEE 802 3at Power over Ethernet IEEE 802 3x Flow Control RFC 768 UDP RFC 783 TFTP Protocol revision 2 RFC 792 ICMP RFC 793 TCP RFC 826 ARP RFC 854 TELNET RFC 951 BOOTP Page 7 QuickSpecs ProCurve Switch 2610 Series Technical Specifications ProCurve Switch 2610 24 PWR J9087A invent Ports Physical characteristics Memory and processor Mounting Performance DA 13032 RFC 1542 BOOTP Extensions RFC 2030 Simple Network Time Protocol SNTP v4 RFC 2131 DHCP RFC 3046 DHCP Relay Agent Information Option IP Multicast RFC 3376 IGMPv3 MIBs RFC 1213 MIB II RFC 1493 Bridge MIB RFC 2021 RMONv2 MIB RFC 2096 IP Forwarding Table MIB RFC 2613 SMON MIB RFC 2618 RADIUS Client MIB RFC 2665 Ethernet Like MIB RFC 2668 802 3 MAU MIB RFC 2674 802 1p and IEEE 802 1Q Bridg
35. ss Control RFC 1492 TACACS Secure Sockets Layer SSL SSHv1 SSHv2 Secure Shell ProCurve Switch 2610 Ports 24 auto sensing 10 100 ports IEEE 802 3 Type 10Base T IEEE 802 3u 24 12PWR Type 100Base TX Media Type Auto MDIX Duplex half or full J2086A 1 RJ 45 serial console port O invent DA 13032 Worldwide Version 1 March 10 2008 Page 10 Qu ickS pecs ProCurve Switch 2610 Series Technical Specitications 2 auto sensing 10 100 1000 ports IEEE 802 3 Type 10Base T IEEE 802 3u Type 100Base TX IEEE 802 3ab Type 1000Base T Duplex 10Base T 100Base IX half or full 1000Base T full only 2 open mini GBIC SFP slots Physical characteristics Dimensions 9 3x 17 4 x 1 73 in D x W x A 23 62 x 44 2 x 4 39 cm 1U height Weight fully loaded 7 5 b 3 4 kg Memory and processor Processor type and speed MIPS 300 MHz Flash capacity 16 MB SDRAM 128 MB SDRAM Packet buffer size 1 MB Mounting Mounts in an ElA standard 19 in telco rack or equipment cabinet hardware included horizontal surface mounting only Performance 100 Mb Latency lt 4 1 us 1000 Mb Latency lt 2 9 us Throughput up to 9 5 million pps Routing Switching 12 8 Gbps capacity Routing table size 8 000 entries Environment Operating temperature 32 F to 122 F 0 C to 50 C Operating relative 15 to 95 104 F 40 C non condensing humidity Non operating 40 F to 158 F 40 C to 70 C Storage temperature Non operating 15 to 90
36. stry standard way of user authentication using an IEEE 802 1X supplicant on the client in conjunction with a RADIUS server O Web based authentication similar to IEEE 802 1X provides a browser based environment to authenticate clients that do not support the IEEE 802 1X supplicant O MAC based authentication client is authenticated with the RADIUS server based on client s MAC address Authentication flexibility O Multiple IEEE 802 1X users per port provides authentication of up to 8 IEEE 802 1X users per port prevents user oiggybacking on another user s IEEE 802 1X authentication O Concurrent IEEE 802 1X and Web or MAC authentication schemes per port switch port will accept any of IEEE 802 1X and either Web or MAC authentications ICMP throttling defeats ICMP denial ot service attacks by throttling of ICMP traffic on the switch Access control lists ACLs provide IP Layer 3 filtering based on source destination IP address subnet and source destination TCP UDP port number Identity driven ACL enables implementation of a highly granular and flexible access security policy specific to each authenticated network user Port security allows access only to specitied MAC addresses which can be learned or specitied by the administrator MAC address lockout prevents configured particular MAC addresses trom connecting to the network Source port filtering allows only specitied ports to communicate with each other TACACS eases switch management security adm
37. tocols DA 13032 Throughput Routing Switching capacity Routing table size Operating temperature Operating relative humidity Non operating Storage temperature Non operating Storage relative humidity Alitude Acoustic Maximum heat dissipation Voltage Current Power consumption Frequency up to 9 5 million pps 12 8 Gbps 8 000 entries 32 F to 122 F 0 C to 50 C 15 to 95 104 F 40 C non condensing 40 F to 158 F 40 C to 70 C 15 to 90 149 F 65 C non condensing up to 10000 ft 3 km Power 62 dB Pressure 53 dB DIN 45635T 19 per ISO 7719 410 BTU hr 432 55 kJ hr Switch only BTU hr 410 combined switch maxPoE devices at 15 4 W 2281 BTU hr 100 127 200 240 VAC 7 0 3 5A 77 N 50 60 Hz NOTE Power Consumption 77 W without PoE 527 W with PoE CSA 22 2 No 60950 UL 60950 IEC 60950 EN 60950 FCC Class A VCCI Class A EN 55022 CISPR 22 Class A EN ESD Radiated EFT Burst Surge Conducted Power frequency magnetic field Voltage dips and interruptions Harmonics Flicker EN 55024 CISPR 24 IEC 61000 4 2 4 kV CD 8 kV AD IEC 61000 4 3 3V m IEC 61000 4 4 1 0 kV power line 0 5kV signal line IEC 61000 4 5 1 kV 2 kV AC IEC 61000 4 6 3V IEC 61000 4 8 1A m 50 or 60 Hz IEC 61000 4 11 gt 95 reduction 0 5 period 30 reduction 25 periods EN 61000 3 2 IEC 61000 3 2 EN 61000 3 3 IEC 61000 3 3 ProCurve
38. upported devices in the product FAQ at www procurve com e Gigabit Uplink Connectivity two 10 100 1000BASE T ports and two mini GBIC ports for Connectivity such as Gigabit SX LX LH 1000BaseT and 100Base FX e ProCurve Auto MDIX automatically adjusts for straight through or crossover cables on all 10 100 ports e Jumbo packet support supports up to 9 216 byte frame size to improve performance of large data transfers Resiliency and high availability e IEEE 802 3ad Link Aggregation Protocol LACP and ProCurve trunking support up to 24 trunks each with up to 8 links ports per trunk e IEEE 802 1s Multiple Spanning Tree provides high link availability in multiple VLAN environments by allowing multiple spanning trees provides legacy support for IEEE 802 1d and IEEE 802 1w e Optional redundant power supply provides uninterrupted power provided by ProCurve 600 RPS EPS Layer 2 switching O invent DA 13032 Worldwide Version 1 March 10 2008 Page Qu ickS pecs ProCurve Switch 2610 Series Overview VLAN support and tagging supports the IEEE 802 1Q 4 096 VLAN IDs and 256 VLANs simultaneously GARP VLAN Registration Protocol allows automatic learning and dynamic assignment of VLANs Layer 3 routing Basic IP routing enables automatic routing to the connected VLANs and up to 16 static routes including one default route in IP networks Security Multiple user authentication methods O IEEE 802 1X indu
Download Pdf Manuals
Related Search