Koolance GPU-180-HO6
Contents
1. Xao1A CE GPU 180 Installation Guide v1 1 The video card or motherboard should be removed from the chassis in order to install the chipset cooler The mounting screws are inserted from the back side of the board Through the original heat sink mounting holes insert both metal mounting screws from the back of the board Make sure the plastic insulating washers are placed on each screw manufacturer s hardware warranty Please consult the manufacturer if unsure and keep all original parts in case of a return RMA Koolance does not recommend using a liquid cooler on video cards or motherboards that lack standard mounting holes or have heat sinks that are attached with only an adhesive rather than screws or bolts A CAUTION Removal of the original heat sink my void your To help keep them secure place rubber washers over the metal screws from above Beneath the board the plastic tabs must be the board squeezed together with needle nose pliers in order to free the original heat sink Some tabs have locking center pins which must first be removed from the top For ATI Radeon video chipsets place the included adhesive foam pad around the chipset core for a flatter mounting surface Remove the protective tape from the bottom Once loosened remove the original of the chipset cooler heat sink Apply a thin layer of thermal interface compound onto the chipset if necessary Two sets of bracket tabs are included wit2. h the chipset cooler Use whichever tabs best align the cooler over the mounting Screws long tab short tab A Place the liquid cooler onto the video or motherboard chipset and align the mounting Chipset Cooler mounted on an ATI Chipset Cooler mounted on an bracket The bracket is highly adjustable for Radeon 9800 Pro nVidia GeForce FX 5900 Ultra proper alignment NOTE For some models of GPU 180 coolers you may need to re adjust your nozzles to Mounting on a P 4 Northbridge Chipset provide more clearance for the bracket Many motherboards for P 4 chips feature heat sinks which are hooked rather than bolted to the Northbridge chipset Use the four attachment springs Use the metal attachment nuts to fasten the included with the GPU 180 cooler to secure the bracket to this type of chipset mounting bracket to the chipset Hand tighten all video card components It is OK for the chipset cooler to sit diagonally on the video card or motherboard Cooling efficiency will be the same Heat sinks are included for attachment to video memory chips for additional cooling Depending on the video card you may not require all 8 heat sinks
Download Pdf Manuals
Related Search