Panasonic WV-Q168
Contents
1. 7 According to your need set the auto focus adjustment Auto focus adjustment becomes available by pushing the AF switch when the model in use is the WV CF294 series Push the AF switch with the When the model in use is the WV CF294 provided AF switch push tool series do the following to use the auto focus function cee Refer to the operating instructions of the camera for further information LOCK position Auto focus adjustment becomes available by pushing the AF switch with the provided AF switch push tool even after mounting the AF switch dome cover In such a case the direction of push tool the camera and the presence of the object should be checked beforehand because visual check is not available on the monitor gt 8 Attach the cover Pull out both the spring hooks and attach the hooks to the cover Make sure that the cover is attached to the ceiling with no space between them DD Cover Match the Panasonic logos on the cover and on the main body of the camera Ambient temperature 10 C to 50 C 14 F 122 F Dimensions 2186 mm 7 31 embedding depth of 60 mm 2 36 Weight Approx 280 g 0 62 Ibs Standard Accessories Operating instructions this document 5 1 pc AF switch push tool occcsicncsiesiiieiiiiir 1 pc The following are for installation FIXING screw M4 X B sacra auentnevaesesesatasesdiadacatae 6 pos incl 2 spare sc2. 10 C to 50 C 14 F to 122 F Locations subject to vibrations This product is not designed for on vehicle use Locations where the temperature may rapidly change such as the peripheral areas of the air outlets of air conditioners or doors facing outside In case of installing the camera in such ocations the dome cover may become foggy or condensation may be caused on the cover e The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area After tightening the screws or bolts perform visual check to ensure tightening is enough and there is no backlash MAEVE Be sure to read Precautions before installation It is recommended to read them while referring the operating instructions of the camera together 1 Make a hole of 160 mm 6 29 diameter using a specialized tool etc When it is impossible to make a precise hole since no specialized tool is at hand or when it is impossible to use it because of the loca tion trace the hole shape using the provid ed template lt O amp oe lt gt Important NS Yu e Make a hole precisely When the opened hole is bigger or deformed too much the ceiling mount bracket cannot be stuck on the ceiling board securely 2 Position two of the spring hooks of the camera as shown in the illustration below When the ceiling mount bracket is installed after positioning them in the opposite side they ma
3. Panasonic Ceiling Mount Bracket Operating Instructions voin WV Q168 WV Q168E Before attempting to connect or operate this product please read these instructions carefully and save this manual for future use The model number is abbreviated in some descriptions in this manual NM0107 2010 3TRO04927CAA Printed in Japan This ceiling embedded bracket is exclusively designed to mount the Camera WV CF284 or WV CF294 on a ceiling This ceiling mount bracket is the embedding type so that the camera body will be dwarfed This bracket is an embedded type to reduce the exposed portion of the camera body Precautions Refer installation work to the dealer Installation work requires technique and experiences Failure to observe this may cause fire electric shock injury or damage to the product e Be sure to consult the dealer Use only the specified camera Failure to observe this may cause a fall of an inappropriate camera resulting in injury or acci dents e Mount WV CF284 or WV CF294 on this bracket exclusively e Select an installation area that can support the total weight If a selected area is too weak to support the total weight a fall of the product may occur resulting in injury e Installation work shall be started after sufficient reinforcement Avoid installing this bracket in the locations where salt damage occurs or corrosive gas is produced Otherwise the mounting portions will deteriorate and accidents such
4. as a fall of the camera may occur e The screws and fixation mechanisms shall be tightened securely Failure to observe this may cause a fall of the camera resulting in injury Periodic inspections shall be conducted Rust on the metal parts or screws may cause a fall of the product resulting in injury e Consult the dealer for the inspections Do not rub the edges of metal parts with your hand Failure to observe this may cause injury Make sure that the installation area is strong enough to hold the total weight of the camera assembly approx 0 8 kg 1 76 lbs before installation The ceiling mount bracket can be installed only when there is a space whose height is 80 mm or more above a ceiling board The ceiling mount bracket can be installed on a ceiling board whose thickness is 30 mm or less The camera and the ceiling mount bracket should be fixed using the provided fixing screws and make sure that the both of them are fixed firmly e When the ceiling mount bracket is not necessary anymore remove from the ceiling e Avoid installing in the following locations e Locations where it may get wet from rain or water splash not only outdoor Locations where a chemical agent is used such as a swimming pool Locations subject to steam and oil smoke such as a kitchen Locations where radiation or x ray emissions are produced Locations where it may be damaged by briny air such as seashores Locations where the temperature is not within
5. rews Template for tracing the hole shape 1 sheet For U S and Canadian fields For European and other fields Panasonic Corporation http panasonic net Panasonic System Networks Company of America Unit of Panasonic Corporation of North America www panasonic com business Panasonic Testing Centre For customer support call 1 800 528 6747 4 Three Panasonic Way Secaucus New Jersey 07094 U S A Nesting oe Dem a ruGetneny Importer s name and address to follow EU rules Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 Canada 905 624 5010 www panasonic ca Panasonic System Networks Co Ltd 2010
6. y become hard to pull out Move the hook head downward Spring hook 3 Fix the ceiling mount bracket onto the ceiling board Loosen the clamping screws until the length between the clamp plates becomes wider that the thickness of the ceiling board and then clamp the ceiling board by tightening the clamping screws Triangle mark The Panasonic logo on the camera should be located on the side of this triangle mark Clamp the Maximum thickness of the ceiling board ceiling board is 30 mm 1 18 for installation Clamp plates Clamping screw Tightening torque 0 61 N m 6 0 kgf cm Important e When the ceiling board is the plasterboard make sure that no crack was made on the ceiling board by clamping 4 Connect the video cable and the power cord to the camera Refer to the operating instructions of the camera 5 Fix the camera using four fixing screws provided 6 Attach the dome cover to the camera and adjust the angular field of view Refer to the operating instructions of the camera Adjust the angular field of view and the focus Attach the dome cover to the camera Fix the dome cover using the dome cover fixing screw Camera Dome cover Fixing screw standard accessory Tightening torque 1 6 N m 16 kgf cm Pa Dome cover fixing screw provided with the camera To be continued reverse page Installations continued
Download Pdf Manuals
Related Search