LG E1910PM LED display
Contents
1. NORMAL GAUSSIAN BLUR SEPIA MONOCHROME MONOCH This menu changed the screen to be ROME Gray tone black and white Picture E2210P MODE gt PHOTO EFFECT fm NORMAL GAUSSIAN BLUR SEPIA MONOCHROME Exit Exit lt P Move f Select another sub menu Troubleshooting Check the following before calling for service No image appears O Is the power cord of the e Check and see if the power cord is connected display connected properly to the power outlet O Is the power indicator Press the Power button light on O Is the power indicator e f the display is in power saving mode try moving flickering the mouse or pressing any key on the keyboard to bring up the screen e Try to turn on the PC Do you see an OUT OF This message appears when the signal from the RANGE message on PC video card is out of horizontal or vertical the screen frequency range of the display See the Specifications section of this manual and configure your display again O Do you see a CHECK This message appears when the signal cable SIGNAL CABLE between your PC and your display is not message on the connected Check the signal cable and try again screen Do you see a OSD LOCKED message on the screen Do you see OSD e You can secure the current control settings LOCKED when you so that they cannot be inad2. O LG Life s Good OWNER S MANUAL LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference LCD MONITOR MODEL EISIOR EX 20 P www lg com Important Precautions This unit has been engineered and manufactured to ensure your personal safety however improper use may result in potential electrical shock or fire hazards In order to allow the proper operation of all safeguards incorporated in this display observe the following basic rules for its installation use and servicing On Safety Use only the power cord supplied with the unit In case you use another power cord make sure that it is certified by the applicable national standards if not being provided by the supplier If the power cable is faulty in any way please contact the manufacturer or the nearest authorized repair service provider for a replacement The power supply cord is used as the main disconnection device Ensure that the socket outlet is easily accessible after installation Operate the display only from a power source indicated in the specifications of this manual or listed on the display If you are not sure what type of power supply you have in your home consult with your dealer Overloaded AC outlets and extension cords are dangerous So are frayed power cords and broken plugs They may result in a shock or fire hazard Call your service technician for replacement As long as this unit is connec
3. OTHERS MENU gt O THERS LANGUAGE LANGUAGE Q POWER INDICATOR POWER IZ WHITE BALANCE INDICATOR FACTORY RESET m x PAVA it Exit Decrease WHITE Increase BALANCE Select another sub menu Restart to select sub menu FACTORY RESET Description To choose the language in which the control names are displayed Use this function to set the power indicator on the front side of the monitor to ON or OFF If you set OFF it will go off If you set ON at any time the power indicator will automatically be turned on If the output of the video card is different the required specifications the color level may deteriorate due to video signal distortion Using this function the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image Activate this function when white and black colors are present in the screen Restore all factory default settings except LANGUAGE Press the lt q gt buttons to reset immediately NOTE a If this does not improve the screen image restore the factory default settings If necessary execute the WHITE BALANCE function again This function will be enabled only when the input signal is an analog signal On Screen Display OSD Selection and Adjustment mm YOU were introduced to the procedure of selecting and adjusting an item using the OSD system Listed below are the icons
4. Form RGB Analog 0 7 Vp p 75 ohm Digital Max VESA 1680 x 1050 60 Hz Recommend VESA 1680 x 1050 60 Hz DDC 2B Digital DDC2AB Anlaog On Mode 28 W Typ Sleep Mode 0 2 W Off Mode lt 0 15 W With Stand Without Stand Width 50 64 cm 19 94 inch Height 36 89 cm 14 52 inch Min 47 89 cm 18 85 inch Max I Width 50 64 cm 19 94 inch Depth 21 00cm 8 26 inch Depth 6 04cm 2 38 inch k Height 33 32 cm 13 12 inch Tilt 4 to 16 Swivel 356 Height 110 mm 4 33 inch AC 100 240 V 50 60Hz1 0A Operating Conditions Temperature 10 Cto35 C Humidity 10 to 80 non Condensing Storage Conditions Temperature 20 C to 60 C Humidity 5 to 90 non Condensing Attached Detached O Wall outlet type NOTE Information in this document is subject to change without notice E1910P Preset Modes Resolution Display Modes Resolution Horizontal Freq kHz Vertical Freq Hz 1 720 x 400 31 468 70 2 640 x 480 31 469 60 3 640 x 480 37 500 75 4 800 x 600 37 879 60 5 800 x 600 46 875 75 6 1024 x 768 48 363 60 7 1024 x 768 60 123 75 8 1152 x 864 67 500 75 9 1280 x 1024 63 981 60 10 1280 x 1024 79 976 75 Be u a a a a a r Recommend Mode E2210P Display Modes Resolution Horizontal Freq kHz Vertical Freq Hz 1 720 x 400 31 468 70 2 640 x 480 31 469 60 3 640 x 480 37 500 75 4 800 x 600 37 879 60 5 800 x 600 46 875 75 6 1024 x 768 48 363 60 7 10
5. cannot be inadvertently changed Press and hold the MENU button for several seconds The message OSD LOCKED should appear You can unlock the OSD controls at any time by pushing the MENU button for several seconds The message OSD UNLOCKED should appear Control Panel Functions 2 MODE Button Use this button to enter F ENGINE ORIGINAL RATIO Only E2210P PHOTO EFFECT menus For more information refer to page 18 E AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings always press the AUTO button before entering the On Screen Display OSD Only Analog Mode This will automatically adjust your display image to the PROCESSING AUTO ideal settings for the current screen resolution size IMAGE ADJUSTMENT display mode The best display mode is E1910P 1280 x 1024 E2210P 1680 x 1050 O INPUT Button When two input signals are connected you can select the SOURCE Hot key input signal D SUB DVI you want When only one signal is connected it is automatically detected The default setting is D Sub 5 EXIT Button Exit the OSD On Screen Display Power Button amp Use this button to turn the display on or off Power Indicator 7 7 7 7 7777777777777777777777777777 The power indicator stays white if the display is running properly On Mode If the display is in Sleep Mode Energy Saving the power indicator is blinking white On Screen Display OSD Control Adjustment Screen Adjustment M
6. damage Do not use this display near water such as near a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation If these openings are blocked built up heat can cause failures which may result in a fire hazard Therefore NEVER Block the bottom ventilation slots by placing the display on a bed sofa rug etc Place the display in a built in enclosure unless proper ventilation is provided Cover the openings with cloth or other material Place the display near or over a radiator or heat source Do not rub or strike the Active Matrix LCD with anything hard as this may scratch mar or damage the Active Matrix LCD permanently Do not press the LCD screen with your finger for a long time as this may cause some afterimages Some dot defects may appear as Red Green or Blue spots on the screen However this will have no impact or effect on the display performance If possible use the recommended resolution to obtain the best image quality for your LCD display If used under any mode except the recommended resolution some scaled or processed images may appear on the screen However this is characteristic of the fixed resolution LCD panel Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn in Make sure to use a screen saver
7. icon names and icon descriptions of the all items shown on the Menu Press the MODE Button then the main menu of the OSD appears Menu Name E1910P E2210P Sub Sub Icons menus Icons menus MODE gt f ENGINE MODE p f ENGINE Button Tip EXIT Exit lt P Move Select another sub menu NOTE OSD On Screen Display menu languages on the monitor may differ from the manual On Screen Display OSD Selection and Adjustment Main menu Sub menu f ENGINE When F ENGINE is not NORMAL CONTRAST can not be selected E1910P MODE gt f ENGINE Description NORMAL MOVIE NORMAL Select this when you want to use the product in the most general using environment E2210P MODE gt f ENGINE NORMAL INTERNET E1910P MODE gt f ENGINE NORMAL INTERNET MOVIE Select this when you are watching a video or movie E2210P MODE gt f ENGINE NORMAL INTERNET E1910P MODE gt f ENGINE A al NORMAL MOV INTERNET INTERNET Select this when you are working on the document Word etc E2210P MODE gt f ENGINE NORMAL INTERNET Exit Exit qs P Move Select another sub menu On Screen Display OSD Selection and Adjustment Only E2210P Main menu WID
8. on the product Burn in and related problems are not covered by the warranty on this product Do not shock or scratch the front and sides of the screen with metallic objects Otherwise it may cause damage to the screen Make sure the panel faces forward and hold it with both hands to move If you drop the product the damaged product can cause electric shock or fire Contact an authorized the service center for repair Avoid high temperatures and humidity Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen Use a slightly damp not wet cloth Do not use an aerosol directly on the display screen because over spraying may cause electrical shock When cleaning the product unplug the power cord and scrub gently with a soft cloth to prevent scratching Do not clean with a wet cloth or spray water or other liquids directly onto the product An electric shock may occur Do not use chemicals such as benzene paint thinners or alcohol Spray water onto a soft cloth 2 to 4 times and use it to clean the front frame wipe in one direction only Too much moisture may cause staining On Repacking Do not throw away the carton and packing materials They make an ideal container in which to transport the unit When shipping the unit to another location repack it in its original material On Disposal The fluorescent lamp used i
9. 24 x 768 60 123 75 8 1152 x 864 67 500 75 9 1280 x 1024 63 981 60 10 1280 x 1024 79 976 T9 11 1680 x 1050 65 290 60 Recommend Mode Indicator ni B LED Color On Mode White Sleep Mode White Blinking Off Mode Off Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device 1 After moving the product to face downward make sure to place it ona soft cloth or a cushion to avoid surface damage 2 Separate the head and the stand with the use of a screwdriver Installing the Wall mount plate 3 Install the Wall mount plate Wall mount plate Separate purchase This is stand type or wall mount type and is connectable with Wall mount plate Please refer to the installation guide for more details which is provided when Wall mount plate is purchased Wall Mount pad Kensington Security Slot lt Screw Mounting Interface Dimension gt C ONNEctEd 10A peso Hole spacing 75 mm x 75 mm cable that can be purchased separately at most computer stores NOTE a VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications Please use VESA standard as below 784 8 mm and under 30 9 inch Wall Mount Pad Thickness 2 6 mm Screw amp 4 0 mm x Pitch 0 7 mm x Length 10 mm 787 4 mm and above 31 0 inch Please use VESA standard wall mount pad and screws
10. E ORIGINAL Exit Exit lt 4 P Move f Select another sub menu Sub menu Description Switch to full screen mode according to input image signal Change the input image signal ratio to original This function works only if input resolution is lower than monitor ratio 16 10 On Screen Display OSD Selection and Adjustment Main menu Sub menu Description PHOTO EFFECT When PHOTO EFFECT is not NORMAL CONTRAST can not be selected and COLOR is grey When COLOR is selected down PHOTO EFFECT is back to NORMAL and CONTRAST can be selected now PHOTO EFFECT and F ENGINE should not be unnormal at the same time E1910P MODED PHOTO EFFECT NORMAL The Photo Effect function is disabled E1910P MODE b PHOTO EFFECT Ea NORMAL GAUSSIAN BLUR SEPIA MONOCHROME This menu changes the screen to be more colorful and smoother BLUR On Screen Display OSD Selection and Adjustment Main menu Sub menu Description PHOTO EFFECT E1910P MODE b PHOTO EFFECT O NORMAL GAUSSIAN BLUR SEPIA MONOCHROME SEPIA This menu changes the screen to be Sepia tone brown color E2210P MODE gt PHOTO EFFECT a NORMAL GAUSSIAN BLUR SEPIA MONOCHROME E1910P MODE gt PHOTO EFFECT
11. Macintosh IL gt MAC Tm Em pol G ma Mac adapter For Apple Macintosh use a separate plug adapter is needed to change the 15 pin high density 3 row D sub VGA connector on the supplied cable to a 15 pin 2 row connector Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure BJA D SUB DVI D D me Wall outlet type oy DVI D This feature is not available in all countries mey c m PC Ii gt Pc 3 Press the power button on the front panel to turn the power on When monitor power is turned on the Self Image Setting Function is executed automatically Only Analog Mode PROCESSING SELF IMAGE SETTING Power Button NOTE Self Image Setting Function This function provides the user with optimal display settings When the user connects the monitor for the first time this function automatically adjusts the display to optimal settings for individual input signals AUTO Function When you encounter problems such as blurry screen blurred letters screen flicker or tilted screen while using the device or after changing screen resolution press the AUTO function button to improve resolution Control Panel Functions Front Panel Controls MONITOR SETUP Ene AE Ko MENU MODE AUTO INPUT EXIT OSD LOCKED UNLOCKED This function allows you to lock the current control settings so that they
12. Make sure to read the Safety Precautions before using the product Keep the OWNER S MANUAL CD in an accessible place for furture reference The model and serial number of the SET is located on the back or one side of the SET Record it below should you ever need service MODEL SERIAL Life s Good ENERGY STAR is a set of power saving guidelines issued by the U S Environmental Protection Agency EPA J As an ENERGY STAR Partner LGE U S A Inc has determined that this product meets the ENERGY STAR guidelines for energy efficiency
13. aking adjustments to the image size position and operating parameters of the display is quick and easy with the On Screen Display Control system A short example is given below to familiarize you with the use of the controls The following section is an outline of the available adjustments and selections you can make using the OSD To make adjustments in the On Screen Display follow these steps BRIGHTNESS O CONTRAST MONITOR SETUP 28 SHARPNESS Rea SS MENU MODE AUTO INPUT EXIT cio Press the discretionary Button then the main menu of the OSD appears To access a control use the corresponding Buttons Use the lt gt Buttons to adjust the image to the desired level Use the Button to select other sub menu items 3 EE Press the EXIT Button to exit from the OSD On Screen Display OSD Selection and Adjustment The following table indicates all the On Screen Display control adjustment and setting menus CAT D SUB Analog signal input DVI D Digital signal input Main menu Sub menu BRIGHTNESS CONTRAST SHARPNESS COLOR TEMP PRESET USER HORIZONTAL VERTICAL LANGUAGE POWER INDICATOR FACTORY RESET NORMAL MOVIE INTERNET WIDE ORIGINAL NORMAL GAUSSIAN BLUR SEPIA MONOCHROME NOTE The order of icons may differ depending on the model 13 21 Supported input lo Description To adjust the bright
14. e head of the monitor and the stand base You can hurt your finger s WARNING You do not need to replace the Locking pin after it is removed to adjust its height ERGONOMIC a It is recommended that in order to maintain an ergonomic and comfortable viewing position the forward tilt angle of the monitor should not exceed 5 degrees Connecting the Display Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise 1 Lift the monitor to its highest height to utilize the Pivot function 2 Landscape amp Portrait You can rotate the panel 90 clockwise Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function If the monitor head touches the Stand Base then the Stand Base could crack Head section Connecting the Display Connecting with the PC 1 Before setting up the monitor ensure that the power to the monitor the computer system and other attached devices is turned off 2 Connect signal input cable and power cord 2 in order then tighten the screw of the signal cable Q Connect DVI D Digital signal Cable Connect D sub Analog signal Cable NOTE This is a simplified representation of the rear view a This rear view represents a general model your display may differ from the view as shown When using a D Sub signal input cable connector for
15. elect sub menu Description To adjust the brightness of the screen To adjust the contrast of the screen To adjust the clearness of the screen Select the screen color e SRGB Set the screen color to fit the SRGB standard color specification e WARM Set the screen to warm color temperature e MEDIUM Set the screen to medium color temperature e COOL Set the screen to cool color temperature e RED Set your own red color levels GREEN Set your own green color levels e BLUE Set your own blue color levels Set your own gamma value 0 1 2 On the monitor high gamma values display whitish images and low gamma values display blackish images On Screen Display OSD Selection and Adjustment Main menu Sub menu Description DISPLAY MENU gt DISPLAY w mo HORIZONTAL To move image left and right VERTICAL E os f Z CLOCK gt so VERTICAL To move image up and down PHASE 4 gt 50 D SUB 1024X768 60Hz Exit Exit CLOCK To minimize any vertical bars or 4 Decrease stripes visible on the screen D Increase background uai Y Select another sub menu The horizontal screen size will also Restart to select sub menu change PHASE To adjust the focus of the display This item allows you to remove any horizontal noise and clear or sharpen the image of characters On Screen Display OSD Selection and Adjustment Main menu Sub menu
16. ixel pitch Horizontal Freq 30 kHz to 83 kHz Automatic Vertical Freq 56 Hz to 75 Hz Automatic Input Form Separate Sync Digital Signal Input 15 pin D Sub Connector DVI D Connector Digital Input Form RGB Analog 0 7 Vp p 75 ohm Digital Max VESA 1280 x 1024 75 Hz Recommend VESA 1280 x 1024 60 Hz DDC 2B Digital DDC2AB Anlaog On Mode 25W Typ Sleep Mode lt 0 2 W Off Mode lt 0 15 W With Stand Without Stand Width 40 89 cm 16 10 inch Height 37 08 cm 14 57 inch Min 48 08 cm 18 92 inch Max Depth 22 44 cm 8 83 inch Width 40 89 cm 16 10 inch Height 33 81 cm 13 31 inch Depth 5 82 cm 2 29 inch Weight excl packing 3 5 kg 7 711 Tilt 4 to 16 Swivel 356 Height 110 mm 4 33 inch AC 100 240 V 50 60 Hz 0 8 A Operating Conditions Temperature 10 Cto 35 C Humidity 10 to 80 non Condensing Storage Conditions Temperature 20 C to 60 C Humidity 5 to 90 non Condensing Attached Detached O Wall outlet type NOTE Information in this document is subject to change without notice Specifications E2210P 55 8 cm 22 inch Flat Panel Active matrix TFT LCD Anti Glare coating Visible diagonal size 55 8 cm 0 282 x 0 282 mm Pixel pitch Horizontal Freq 30 kHz to 83 kHz Automatic Vertical Freq 56 Hz to 75 Hz Automatic Input Form Separate Sync Digital Signal Input 15 pin D Sub Connector DVI D Connector Digital Input
17. n this product contains a small amount of mercury Do not dispose of this product with general household waste Disposal of this product must be carried out in accordance to the regulations of your local authority Accessories Thank for selecting LGE products Please make sure the following items are included with your monitor If any items are missing contact your dealer DVI D Signal Cable 15 pin D Sub Signal Cable This feature is not available in all To setit up this signal cable may be countries attached to this product before shipping out NOTE This accessories may look different from those shown here User must use shielded signal interface cables D sub 15 pin cable DVI D cable with ferrite cores to maintain standard compliance for the product Connecting the Display Before setting up the monitor ensure that the power to the monitor the computer system and other attached devices are turned off Connecting the stand base or Removing the stand base 1 Place the monitor with its front facing downward on a cushion or soft cloth 2 Assemble the Stand Base into the Stand Body Be sure don t pull out the Stop Pin and make the Stand Base direction as shown Stop Pin Stand Body Stand Base WARNING The tape and locking pin may only be removed from those monitors equipped with a standing base when the base is pulled up Otherwise you may be injured by the protruding sections
18. ness contrast and sharpness of the screen To customize the color of the screen To adjust the position of the screen To improve the clarity and stability of the screen To customize the screen status for a user s operating environment To select or customize desired image settings To adjust the image size To adjust screen color mode On Screen Display OSD Selection and Adjustment mm YOu were introduced to the procedure of selecting and adjusting an item using the OSD system Listed below are the icons icon names and icon descriptions of the all items shown on the Menu Press the MENU Button then the main menu of the OSD appears Menu Name BRIGHTNESS Sub CONTRAST menus Icons 28 SHARPNESS Exit Adjust Decrease Increase Select another sub menu Restart to select sub menu NOTE OSD On Screen Display menu languages on the monitor may differ from the manual On Screen Display OSD Selection and Adjustment P lt IVA Main menu CONTRAST 28 SHARPNESS Decrease Increase COLOR TEMP 4 PRESET PRESET 4 WARM gt Y GAMMA 4 GAMMA1 gt m a P Exit Decrease Increase Select another sub menu Sub menu BRIGHTNESS CONTRAST SHARPNESS lt q gt YV Select another sub menu ft Restart to select sub menu COLOR TEMP PRESET USER Restart to s
19. of the stand Product Handling with Care When you lift up or move the product Do Not hold or touch the front part of LCD panel It will damage the panel Please hold the Stand Body or plastic cover of the product Connecting the Display 3 Use a coin on the back of the stand base and turn the screw clockwise to tighten 4 Lift and turn the monitor to face towards the front after the connection is made to the female part of the cable you re attaching 5 When you desire to disintegrate the monitor from the stand base use a coin to turn the screw counterclockwise IMPORTANT a This illustration depicts the general model of connection Your monitor may differ from the items shown in the picture Do not cany the product upside down holding only the stand base The product may fall and get damaged or injure your foot Positioning your display After installation adjust the angle as shown below 1 Adjust the position of the panel in various ways for maximum comfort a Tilt Range 4 to 16 Swivel Range 356 356 Connecting the Display Height Range maximum 4 33 inches 110 0 mm Please be sure to remove the Locking pin to adjust the height a When adjusting the angle of the screen do not put your finger s in ee the head of the monitor and the stand body You can hurt your inger s a When adjusting the height of the screen do not put your finger s in between th
20. resolution f the recommended resolution optimal resolution is not selected letters may be blurred and the screen may be dimmed truncated or biased Make sure to select the recommend resolution The setting method can differ by computer and O S Operation System and resolution mentioned above may not be supported by the video card performance In this case please ask to the computer or the video card manufacturer Troubleshooting Display image is incorrect The screen color is e Check if the signal cable is properly connected mono or abnormal and use a screwdriver to fasten if necessary e Make sure the video card is properly inserted in the slot e Set the color setting higher than 24 bits true color at Control Panel Settings The screen blinks e Check if the screen is set to interlace mode and if yes change it to the recommend resolution Do you see an Unrecognized monitor Plug amp Play VESA DDC monitor found message Have you installed the e Be sure to install the display driver from the display display driver driver CD or diskette that comes with your display Or you can also download the driver from our web site http www lg com e Make sure to check if the video card supports Plug amp Play function Specifications E1910P 48 2 cm 19 inch Flat Panel Active matrix TFT LCD Anti Glare coating Visible diagonal size 48 2 cm 0 294 x 0 294 mm P
21. ted to the AC wall outlet it is not disconnected from the AC power source even if the unit is turned off Do not Open the Display There are no user serviceable components inside There are Dangerous High Voltages inside even when the power is OFF Contact your dealer if the display is not operating properly To Avoid Personal Injury Do not place the display on a sloping shelf unless properly secured Use only a stand recommended by the manufacturer Do not drop an object on or apply impact to the product Do not throw any toys or objects on the product screen It can cause injury to human problem to product and damage the display To Prevent Fire or Hazards Always turn the display OFF if you leave the room for more than a short period of time Never leave the display ON when leaving the house Keep children from dropping or pushing objects into the display s cabinet openings Some internal parts carry hazardous voltages Do not add accessories that have not been designed for this display When the display is to be left unattended for an extended period of time unplug it from the wall outlet In the presence of thunder and lightning never touch the power cord and signal cable because it can be very dangerous It can cause electric shock Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord and do not place the display where the power cord is subject to
22. vertently changed push MENU button You can unlock the OSD controls at any time by pushing the MENU button for several seconds the message OSD UNLOCKED will appear Troubleshooting Display image is incorrect O Display Position is incorrect On the screen background vertical bars or stripes are visible O Any horizontal noise appearing in any image or characters are not clearly portrayed e Press the AUTO button to automatically adjust your display image to the ideal setting lf the results are unsatisfactory adjust the image position using the H position and V position icon in the on screen display e Press the AUTO button to automatically adjust your display image to the ideal setting lf the results are unsatisfactory decrease the vertical bars or stripes using the CLOCK icon in the on screen display e Press the AUTO button to automatically adjust your display image to the ideal setting lf the results are unsatisfactory decrease the horizontal bars using the PHASE icon in the on screen display e Check Control Panel gt Display gt Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting Set the color setting higher than 24 bits true color IMPORTANT Check Control Panel gt Display gt Settings and see if the frequency or the resolution were changed If yes readjust the video card to the recommend
Download Pdf Manuals
Related Search